TANAKA Manabu 奥山栄樹

… Alternative Names

奥山栄樹オクヤマエイキ

奥山英樹オクヤマエイキ

奥山永樹オクヤマエイキ

OKUYAMA Eiki 奥山栄樹

Less

Researcher Number	80177188
Other IDs
External Links
Affiliation (Current)	2025: 秋田大学, 理工学研究科, 教授
Affiliation (based on the past Project Information) *help	2016 – 2017: 秋田大学, 理工学研究科, 教授 2015: 秋田大学, 工学(系)研究科(研究院), 教授 2014: 秋田大学, 大学院工学資源学研究科, 准教授 2011 – 2014: 秋田大学, 工学(系)研究科(研究院), 准教授 2012: 秋田大学, 大学院・工学資源学研究科, 准教授 … More 2010: 秋田大学, 大学院・工学資源学研究科, 准教授 2009: 秋田大学, 工学資源学部, 准教授 2008: 国立大学法人秋田大学, 工学資源学部, 准教授 2007: Akita University, Faculty of Engineering and Resource Science, Associate Professor 2004 – 2006: 秋田大学, 工学資源学部, 助教授 1998 – 2001: Akita Univ., Dept.of Eng.and Resource Sci., Associate Prof., 工学資源学部, 助教授 1997: 秋田大学, 鉱山学部, 助教授 1993 – 1994: Akita University Mining College Assistant, 鉱山学部, 助手 Less
Review Section/Research Field	Principal Investigator 機械工作・生産工学 / Production engineering/Processing studies Except Principal Investigator Materials/Mechanics of materials / 機械工作・生産工学 / 金属加工(含鋳造) / Science education / Production engineering/Processing studies
Keywords	Principal Investigator STM / ナノ・メータ / 加工計測 / 表面粗さ測定 / 細管 / 表面粗さ / Surface roughness / inverse matrix / inverse filtering / nano-meter … More / radial motion / 逆行列法 / 逆フィルタリング法 / 軸の回転精度 / nano-meter region / displacement calibration / ノッチ型ヒンジ / 結晶格子 / 変位較正システム / サブ・ナノ・メータ / 変位較正 / ナノ・メータ領域 / 精密位置決め、加工計測 / 精密位置決め / 差動レーザオートコリメーション / 真直度 … More Except Principal Investigator Shear force control / Concentrated-mass cantilever / シアフォース制御 / 集中質量型カンチレバー / SPM (STM) / Cyclic rubbing of tip / Nano machining of groove / Second mode of flexural vibration / Nano channel / Nano machining at ultrasonic freauency / Atomic force microscopy / 走査型プローブ顕微鏡 / 超音波加工 / 探針の摺動 / 溝加工 / 2次モード / ナノ流路 / 超音波ナノ加工 / 原子間力顕微鏡 / Silicon tip / Energy release rate / Adhesion force / DNA chips for genetic diagnoses / DNA molecules / Atomic force acoustic microscopy / 弾性計測 / 付着エネルギー / 高感度化技術 / シリコン探針 / エネルギー解放率 / 付着力 / 遺伝子診断チップ / DNA分子 / 原子間力超音波顕微鏡 / disturbance / sub nanometer / positioning / Atomic Tracking / Atom Craft / SPM / 外乱 / サブナノメートル位置決め / 原子トラッキング / SPM(STM) / アトムクラフト / Localized Necking / Forming Limit / Plastic Instability / Limit of Ductility / Forging / 局所くびれ / 成形限界 / 塑性不安定 / 延性限界 / 鍛造 / ナノナノコイル / ナノチューブ / 逆テンプレート / 炭素 / 固相還元 / 中空構造 / ナノ材料 / ミニチュア模型 / サイズ変換 / 模型 / 実習 / 実践 / 創造性 / 工学教育 / ものづくり / STM / 軸受回転誤差 / マルチプローブ / 2次元原子エンコーダ / ピコメートル / ナノメートル / 超精密計測 / マルチプローブSTM / 格子間隔 / 走査型トンネル顕微鏡(STM) / サブナノメートル / 結晶格子 / ラジアルモーション / 精密軸受 Less

Expansion of measurement range of surface roughness measurement system in small tubePrincipal Investigator
- Principal Investigator
  
  OKUYAMA Eiki
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Akita University
Hollow nanostructures fabricated from deoxidization using carbon film and the utilization as a template for producing the inversely-shaped nanostructures
- Principal Investigator
  
  MURAOKA Mikio
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Akita University
Surface Roughness Measurements of a Narrow BoreholePrincipal Investigator
- Principal Investigator
  
  OKUYAMA Eiki
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Akita University
Research and Development of the Incentive Practice Method of MONOZUKURI to Fostering Creative Ability by Resizing Handcraft Miniatures.
- Principal Investigator
  
  OHYOSHI Tadashi
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Science education
- Research Institution
  Akita University
精密軸受回転誤差の結晶格子を基準とするピコメートル直接計測法の開発
- Principal Investigator
  
  AKETAGAWA Masato
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagaoka University of Technology
Nano Machining of Channels by Rubbing at Ultrasonic Frequency Under Control of Surface Fracture at Nano Scale
- Principal Investigator
  
  MURAOKA Mikio
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Akita University
Atomic Force Acoustic Microscopy for Imaging and Characterizing Biological Molecules
- Principal Investigator
  
  MURAOKA Mikio
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Akita University
Ultra precise 2-dimensional atomic tracking control for atom craft
- Principal Investigator
  
  TAKADA Koji
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Nagaoka University of Technology
Study for the Radial Motion Measurement Using the Atom Chase Method in Nano-meter RangePrincipal Investigator
- Principal Investigator
  
  OKUYAMA Eiki
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Akita University
A Study on the Displacement Calibration System for Nano-meter RegionPrincipal Investigator
- Principal Investigator
  
  OKUYAMA Eiki
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Akita University
零点ずれとドリフトに対処した補正型差動レーザオートコリメーションに関する研究Principal Investigator
- Principal Investigator
  
  奥山栄樹
- Project Period (FY)
  1994
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Akita University
Deformation Behavior and Ductility in Free Forging with Convex Die.
- Principal Investigator
  
  MORITOKI Hitoshi
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  Akita University

All 2016 2014 2013 2007 2006 Other

All Journal Article Presentation

[Journal Article] Developmet of a Surface Roughness Measurement Syatem in a Borehole2016
- Author(s)
  Eiki OKUYAMA, Yuichi SUZUKI, Masahiro MORIKAWA, Yuma SUZUKI and Ichiro YOSHIDA
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: Vol.10 Pages: 821-826
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-15K05709
[Journal Article] Surface Roughness Measurements of a Narrow Borehole --- Development of Stylus with Cylindrical Mirror and Lensed Fiber ---2014
- Author(s)
  Eiki OKUYAMA, Wataru YOSHINARI, Yuichi SUZUKI, Riku YOSHIDA, Ichiro YOSHIDA and Masashi IWAKATA
- Journal Title
  
  Advanced Materials Research
  
  Volume: vol.939 Pages: 491-498
- DOI
  10.4028/www.scientific.net/amr.939.491
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560112
[Journal Article] Direct measurement of spindle error motion using regular crystalline lattice and scanning tunneling microscope2007
- Author(s)
  M. Aketagawa, P. Chaikool and E. Okuyama
- Journal Title
  
  Proc. of 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2007)
  
  Pages: 183-186
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18656044
[Journal Article] 超精密軸受回転誤差の原子トラッキングによる直接測定(第1報 : 測定原理と装置構想)2006
- Author(s)
  明田川正人, パタマポーンチャイクール, 奥山栄樹
- Journal Title
  
  2006年度精密工学会秋季大会学術講演会講演論文集,(2006), CO7 Vol. 2006A
- NAID
  130004658003
- Data Source
  KAKENHI-PROJECT-18656044
[Journal Article] Surface Roughness Measurements of a Narrow Borehole --- Development of a carriage ---
- Author(s)
  Eiki OKUYAMA, Yuichi SUZUKI and Ichiro YOSHIDA
- Journal Title
  
  Transactions on GIGAKU(ID ICEEHE-002)
  
  Volume: (校閲終了)(掲載待ち)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560112
[Presentation] 細管内粗さ計用キャリッジの開発2013
- Author(s)
  鈴木裕一, 奥山栄樹
- Organizer
  精密工学会東北支部学術講演会
- Place of Presentation
  秋田県仙北市
- Year and Date
  2013-12-07
- Data Source
  KAKENHI-PROJECT-23560112
[Presentation] Direct Measurement of Spindle Error Motion with 10-Picometer Resolution Using Atomic Two-Dimensional Encoder2007
- Author(s)
  Masato Aketagawa, Patamaporn Chaikool and Eiki Okuyama
- Organizer
  Asian Symposium for precision Engineeringand Nanotechnology
- Place of Presentation
  韓国光州市
- Year and Date
  2007-11-07
- Data Source
  KAKENHI-PROJECT-18656044

1. MURAOKA Mikio (50190872)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
2. AKETAGAWA Masato (10231854)

# of Collaborated Projects: 2 results

# of Collaborated Products: 3 results
3. OHYOSHI Tadashi (70006691)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. TAKAHASHI Mamoru (90261651)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. TANAKA Manabu (90113901)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. MIURA Kimihisa (80110667)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. SAKON Takuo (80271964)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. JU Yan (60312609)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. MORITOKI Hitoshi (60005246)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. TAKADA Koji (80126474)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

TANAKA Manabu 奥山 栄樹

奥山 栄樹 オクヤマ エイキ

奥山 英樹 オクヤマ エイキ

奥山 永樹 オクヤマ エイキ

OKUYAMA Eiki 奥山 栄樹

Research Projects

Research Products

Co-Researchers

Expansion of measurement range of surface roughness measurement system in small tubePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Hollow nanostructures fabricated from deoxidization using carbon film and the utilization as a template for producing the inversely-shaped nanostructures

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Surface Roughness Measurements of a Narrow BoreholePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research and Development of the Incentive Practice Method of MONOZUKURI to Fostering Creative Ability by Resizing Handcraft Miniatures.

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

精密軸受回転誤差の結晶格子を基準とするピコメートル直接計測法の開発

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Nano Machining of Channels by Rubbing at Ultrasonic Frequency Under Control of Surface Fracture at Nano Scale

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Atomic Force Acoustic Microscopy for Imaging and Characterizing Biological Molecules

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Ultra precise 2-dimensional atomic tracking control for atom craft

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study for the Radial Motion Measurement Using the Atom Chase Method in Nano-meter RangePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on the Displacement Calibration System for Nano-meter RegionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

零点ずれとドリフトに対処した補正型差動レーザオートコリメーションに関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Deformation Behavior and Ductility in Free Forging with Convex Die.

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

TANAKA Manabu 奥山栄樹

奥山栄樹オクヤマエイキ

奥山英樹オクヤマエイキ

奥山永樹オクヤマエイキ

OKUYAMA Eiki 奥山栄樹