MATSUZAKI Kenichiro 松崎健一郎

Researcher Number	80264068
Other IDs
External Links
Affiliation (Current)	2025: 鹿児島大学, 理工学域工学系, 教授
Affiliation (based on the past Project Information) *help	2015 – 2024: 鹿児島大学, 理工学域工学系, 教授 2015: 鹿児島大学, 工学部, 教授 2012 – 2014: 鹿児島大学, 理工学研究科, 教授 2011: 九州大学, 工学(系)研究科(研究院), 准教授 2007 – 2011: Kyushu University, Department of Intelligent Machinery and Systems, Associate Professor … More 2010: Kyushu University, 工学研究院, 准教授 2007 – 2008: 九州大学, 工学研究院, 准教授 2006: Kyushu University, Faculty of Engineering, Associate Professor, 大学院工学研究院, 助教授 2000 – 2005: Kyushu University, Faculty of Engineering, Associate Professor, 大学院・工学研究院, 助教授 2003: 九州大学, 工学研究院, 助教授 2001: 九州大学, 工学研究院, 助教授 1999: Kyushu University, Graduate School of Engineering, Associate Professor, 大学院・工学研究科, 助教授 1995 – 1998: 九州大学, 工学部, 講師 Less
Review Section/Research Field	Principal Investigator Dynamics/Control / Dynamics/Control Except Principal Investigator Dynamics/Control / Dynamics/Control / Basic Section 20010:Mechanics and mechatronics-related
Keywords	Principal Investigator 自励振動 / パターン形成 / ライフリングマーク / BTA / 穴多角形化 / 加工穴多角形化 / リーマ / ボーリング加工 / 深穴加工 / 非線形滅衰 … More / 非線形減衰 / 定常流れ / 粘性流体 / ナビエーストークス方程式 / 平板の振動 … More Except Principal Investigator 自励振動 / 時間遅れ系 / Pattern Formation / Modal Analysis / Stability / 回転体の振動 / パターン形成 / 機械力学・制御 / モード解析 / 非線形振動 / Self-Excited Vibration / Polygonal Wear / 接触回転系 / 最適設計 / 動吸振器 / 安定性 / 摩擦振動 / Quenching of Pattern Formation / Dynamic Absorber / パターン形成現象 / Hot Leveler / ホットレベラ / 振動制御 / 安定解析 / Stability Analysis / Time Delay System / 不安定振動 / 摩耗 / 安定判別 / 強制振動 / オートマチックトランスミッション / BTA Cutting / 多角形摩耗 / Unstable Vibration / Energy Factor / Contact Rotating System / Pattern Formation Phenomena / エネルギー指数 / Vibration of Rotating Body / Nonlinear Vibration / 摩擦 / Frictional Vibration / 振動診断 / ボーリング加工 / 不等分割刃 / リーマ加工 / 多角形化現象 / Self-excited Vibration / Polonal Wear / Time delay system / Contact rotating system / Optimum design / Dynamic absorber / Pattern formation phenomena / Self-excited vibration / Vibration control / Dynamics ＆ Control / ファーストオーダ解析 / 多角形磨耗 / Rolling Contact System / Contact Vibration / 製鉄機械 / 磨耗 / 安定性解析 / 接触振動 / Optimum Design / Unstable Vobration / Model Analysis / First Order Analysis / バブルリフタ / 多角形摩擦 / ファーストオーダーアナリシス / Optimal Design / DC Motor / Chattering / Wear / Viscoelastic Body / 研削加工 / DCモータ / チャタリング / 粘弾性体 / Method of Harmonic balance / Transfer Stiffness Coefficient Method / Rotor / Multi-Degree-of-Freedom System / Forced Vibration / 部分構造合成法 / 伝達影響係数法 / 調和バランス法 / 伝達剛性係数法 / 回転体 / 多自由度系 / Drum-Like Test Rig for the High Speed Magnetic Field Induced by Eddy Current / Levitation due to a Magnetic Field induced by Eddy Current / Chaos / Identification of Spring Function due to Magnetic Force / Damping due to Magnetic Field Induced by Eddy Current / Motion Control / Magnetic Levitation / 高精度数値化 / シミュレーション / 渦電流による磁気浮上 / 関数同定 / 磁気力ばね / ドラム式高速渦電流磁場試験機 / 渦電流磁場による浮上 / 渦電流磁場により制振 / 磁気力ばね関数の同定 / ドラム式高速過電流磁場試験機 / カオス / 過電流磁場による浮上 / 過電流磁場による制振 / 磁気ばね関数の同定 / 運動制御 / 非線型振動 / 磁気力浮上 / 非対称行列系 / 負性抵抗 / 非対称行列 / 係数励振 / シャダー / ブレーキ鳴き / 非線形性 / 粘弾性特性 / 抄紙機 / 固有モード / 大規模系 / 計算機援用解析 / 低次元化法 / 振動解析 / ピン抜け現象 / 動的挙動 / 接触問題 / 衝撃応答 / 表面あらさ / 焼き嵌め / スティクスリップ現象 / 乾性摩擦 / クーロン摩擦 / 圧送システム / 渦電流センサー / 探傷システム / プローブ列 / Transfer Influence Coefficient Method / Fast Breeder Reactor / Helical Evaporator Tube / Eddy Current Testing / Vibration Coupled with Fluid Motion Less

Development of new detection technology of self-excited vibration and quantification of suppressive method
- Principal Investigator
  
  劉孝宏
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 20010:Mechanics and mechatronics-related
- Research Institution
  Oita University
Challenge to develop high-precision boring tools based on self-excited vibration theory
- Principal Investigator
  
  Ryu Takahiro
- Project Period (FY)
  2021 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 20010:Mechanics and mechatronics-related
- Research Institution
  Oita University
Development of innovative vibration absorber and its application for automatic transmission for cars
- Principal Investigator
  
  RYU TAKAHIRO
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 20010:Mechanics and mechatronics-related
- Research Institution
  Oita University
Development of a high-performance system of vibration analysis based on a new type of complex modal analysis for a self-excited system and a nonlinear system
- Principal Investigator
  
  Kondou Takahiro
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
Development of effective vibration reduction technology for automotive automatic transmissions
- Principal Investigator
  
  RYU TAKAHIRO
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  Oita University
Countermeasure against polygonal deformation phenomenon of borehole in boring processPrincipal Investigator
- Principal Investigator
  
  Matsuzaki Kenichiro
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kagoshima University
Operating mechanism and rational optimization of dynamic absorber for a self-excited vibration
- Principal Investigator
  
  KONDOU TAKAHIRO
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
A Study for Vibration Suppression method of Tool in BTA Deep Hole Drilling ProcessPrincipal Investigator
- Principal Investigator
  
  MATSUZAKI Kenichiro
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kagoshima University
  Kyushu University
Challenge to systematize the fundamental mechanisms of friction induced vibrations with multiple factors
- Principal Investigator
  
  RYU TAKAHIRO
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  Oita University
Clarification of nonlinear characteristics for polygonal pattern formation phenomena in contact rotating systems and their application to prevention method
- Principal Investigator
  
  SOWA Nobuyuki
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
A Study for generation mechanism and countermeasures of vibration on BTA Deep Hole Drilling ProcessPrincipal Investigator
- Principal Investigator
  
  MATSUZAKI Kenichiro
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
A Study on Optimum Design to Suppress Pattern Formation Phenomena of Rolling Contact Systems Caused by Viscoelastic Deformation.
- Principal Investigator
  
  RYU Takahiro
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  Oita University
Development of high-performance system of vibration analysis and experimental estimation method of optimal model for large scale nonlinear systems
- Principal Investigator
  
  KONDOU Takahiro
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
Vibration analysis and experimental verification of polygonal pattern formation phenomena caused by time delay
- Principal Investigator
  
  SOWA Nobuyuki
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
サイクロン減速器内のピン抜けのメカニズム解明に関する研究
- Principal Investigator
  
  末岡淳男
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
Perfect Countermeasure against Pattern Formation Phenomena Generated in Contact Rotating Systems
- Principal Investigator
  
  SUEOKA Atsuo
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
Development and experimental verification of optimum design methods for dynamic absorbers for inhibiting pattern formation phenomena in contact rotating systems
- Principal Investigator
  
  KONDOU Takahiro
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Dynamics/Control
- Research Institution
  KYUSHU UNIVERSITY
原子力発電用蒸発管探傷システムにおけるプローブ列の摩擦振動と渦電流センサノイズ
- Principal Investigator
  
  SUEOKA Atsuo
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
Pattern Formation Phenomenon Accompanied by Wear Generated in Rotating Contact Systems and Its Countermeasures
- Principal Investigator
  
  SUEOKA Atsuo
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Dynamics/Control
- Research Institution
  KYUSHU UNIVERSITY
Countermeasure of the pattern formation phenomena generated on rolling contact systems
- Principal Investigator
  
  TAKASHIRO Ryu
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  Oita University
走行する平板の振動と周辺流体の流れに関する研究Principal Investigator
- Principal Investigator
  
  松崎健一郎
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
Pattern Formation Phenomena Generated in Steel Making Machines and Automobiles and Its Countermeasures
- Principal Investigator
  
  SUEOKA Atsuo
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
Design method to prevent the pattern formation phenomena in contact rotating systems
- Principal Investigator
  
  KONDOU Takahiro
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  Kyushu University
Simplified method to estimate the intensity of instability which causes the pattern formation phenomena in contact rotating systems
- Principal Investigator
  
  KONDOU Takahiro
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  KYUSHU UNIVERSITY
Elucidation of Pattern Formation Phenomena Generated in Contact Rotating Systems
- Principal Investigator
  
  SUEOKA Atsuo
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Dynamics/Control
- Research Institution
  KYUSHU UNIVERSITY
Development of a system of vibration analysis for large scale nonlinear structures by using the incremental transfer stiffness coefficient method
- Principal Investigator
  
  KONDOU Takahiro
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  KYUSHU UNIVERSITY
FUNDAMENTAL RESERCH ON THE NONLINEAR VIBRATION AND MOTION CONTROL OF A MAGLEV-SYSTEM
- Principal Investigator
  
  TAMURA Hideyuki
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  KUMAMOTO INSTITUTE OF TECHNOLOGY
  Kyushu University

[Journal Article] Countermeasures against polygonal defor-mation of borehole in reaming process and its detection method for 7-flute reamer2024
- Author(s)
  Ryu T. Nakae T. Matsuzaki K. Matsumoto Y. Adachi S, Kitamura J. Tsukamoto K. Hirata N
- Journal Title
  
  Proceedings of ICSV30
  
  Volume: 1 Pages: 1-8
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21K03949
[Journal Article] Countermeasures against polygonal deformation of borehole in reaming process2023
- Author(s)
  Ryu T. Nakae T. Matsuzaki K. Matsumoto Y. Tsukamoto K. Hirata N
- Journal Title
  
  Journal of Physics: Conference Series
  
  Volume: 2643 Issue: 1 Pages: 1-8
- DOI
  10.1088/1742-6596/2643/1/012002
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-21K03949
[Journal Article] FUNDAMENTAL STUDY ON SUPPRESSIVE EFFECT OF DYNAMIC ABSORBER TO SUBHARMONIC VIBRATION OF ORDER 1/2 IN AN AUTOMATIC TRANSMISSION FOR CARS2021
- Author(s)
  Takahiro Ryu, Atsushi Kodama, Takashi Nakae, Kenichiro Matsuzaki
- Journal Title
  
  Proceedings of ICSV27
  
  Volume: 1 Pages: 1-8
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18H01396
[Journal Article] Fundamental study on the optimal path of centrifugal pendulum vibration2019
- Author(s)
  Takahiro Ryu, Takashi Nakae, Kenichiro Matsuzaki and Junya Ozaki
- Journal Title
  
  Materials Science and Engineering
  
  Volume: 670 Issue: 1 Pages: 1-5
- DOI
  10.1088/1757-899x/670/1/012004
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01396
[Journal Article] Fundamental study on optimal desing of dynamic absorber to suppress subharmonic vibration of order 1/2 in automatic transmission for cars2019
- Author(s)
  Risa Ueno, Takahiro Ryu, Takashi Nakae and Kenichiro Matsuzaki
- Journal Title
  
  Proceedings of ICSV26
  
  Volume: 1 Pages: 1-8
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01396
[Journal Article] Fundamental study on countermeasures against subharmonic vibration of order 1/2 in automatic transmissions for cars2018
- Author(s)
  Fumiya Takino, Takahiro Ryu, Takashi Nakae, Kenichiro Matsuzaki and Risa Ueno
- Journal Title
  
  MATEC Web Conf.
  
  Volume: 211 Pages: 1-6
- DOI
  10.1051/matecconf/201821113004
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01396
[Journal Article] TORSIONAL VIBRATION SUPPRESSION IN AUTOMATIC TRANSMISSION POWERTRAIN USING CENTRIFUGAL PENDULUM VIBRATION ABSORBER2017
- Author(s)
  Takashi Nakae, Takahiro Ryu and Kenichiro Matsuzaki
- Journal Title
  
  Proceedings of 24th international congress on sound and vibration
  
  Volume: 1 Pages: 1-8
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05866
[Journal Article] Optimal Design of Spring Characteristics of Damper for Subharmonic Vibration in Automatic Transmission Powertrain2016
- Author(s)
  Takashi Nakae, Takahiro Ryu, Kenichiro Matsuzaki et al.
- Journal Title
  
  Journal of Physics: Conference Series
  
  Volume: 744 Pages: 1-12
- DOI
  10.1088/1742-6596/744/1/012208
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-15K05866
[Journal Article] Fundamental study of subharmonic vibration of order 1/2 in automatic transmissions for cars2016
- Author(s)
  Takahiro Ryu, Takashi Nakae, Kenichiro Matsuzaki et al.
- Journal Title
  
  Journal of Physics: Conference Series
  
  Volume: 744 Pages: 1-11
- DOI
  10.1088/1742-6596/744/1/012206
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-15K05866
[Journal Article] Theoretical and experimental study on rifling mark generating phenomena in BTA deep hole drilling process (generating mechanism and countermeasure)2015
- Author(s)
  Kenichiro Matsuzaki, Takahiro Ryu, Atsuo Sueoka, Keizo Tsukamoto
- Journal Title
  
  International Journal of Machine Tools and Manufacture
  
  Volume: 88 Pages: 194-205
- DOI
  10.1016/j.ijmachtools.2014.10.003
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26420179
[Journal Article] Optimal Design of Dynamic Absorber for Subharmonic Nonlinear Vibration in Automatic Transmission Powertrain2015
- Author(s)
  Takashi Nakae, Takahiro Ryu, Kenichiro Matsuzaki, Sofian Rosbi, Atsuo Sueoka, YoshihiroTakikawa, Yoichi Ooi
- Journal Title
  
  Proc. of APVC 2015
  
  Volume: １ Pages: 614-622
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K05866
[Journal Article] Fundamental Study of Subharmonic Vibration in Automatic Transmissions2015
- Author(s)
  Akihiro Nanba, Takashi Nakae, Takahiro Ryu, Kenichiro Matsuzaki, Sofian Rosbi, YoshihiroTakikawa, Yoichi Ooi, Atsuo Sueoka
- Journal Title
  
  Proc. of APVC 2015
  
  Volume: １ Pages: 475-482
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K05866
[Journal Article] Experimental Study on the Mechanism and Counter- measures of Rifling Mark Generation in BTA Deep Hole Drilling Process2013
- Author(s)
  Takaaki Honda, Takahiro Ryu, Kenichiro Matsuzaki, Keizo Tsukamoto, Katsushi Fujii, Yoshikazu Yuge, Atsuo Sueoka
- Journal Title
  
  Proceedings of 15th Asia-Pacific Vibration Conference
  
  Volume: (CD-ROM) Pages: 212-217
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560262
[Journal Article] Experimental Study on the Mechanism and Countermeasures of Rifling Mark Generation in BTA Deep Hole Drilling Process2013
- Author(s)
  Takaaki Honda, Takahiro Ryu, Kenichiro Matsuzaki, Keizo Tsukamoto, Katsushi Fujii, Yoshikazu Yuge, Atsuo Sueoka
- Journal Title
  
  Proceedings of the 15th Asia-Pacific Vibration Conference
  
  Volume: 1 Pages: 212-217
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560262
[Journal Article] Analysis of nonlinear pressure wave in elastic pipe by concentrated mass model2013
- Author(s)
  ISHIKAWA Satoshi, Takahiro KONDOU, Kenichiro MATSUZAKI, Shota NAGANO
- Journal Title
  
  Proceedings of 15th Asia-Pacific Vibration Conference
  
  Volume: USB Pages: 263-1268
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360091
[Journal Article] Numerical study for rifling mark generating phenomena on BTA deep hole drilling process2012
- Author(s)
  Kenichiro Matsuzaki, Takahiro Ryu, Atsuo Sueoka, Keizo Tsukamoto, Takaaki Honda
- Journal Title
  
  Proceedings of ISMA2012-USD2012 Conference
  
  Volume: CD-ROM Pages: 3033-3046
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560262
[Journal Article] Numerical study for rifling mark generating phenomena on BTA deep hole drilling process2012
- Author(s)
  Kenichiro Matsuzaki, Takahiro Ryu, Atsuo Sueoka, Keizo Tsukamoto, Takaaki Honda
- Journal Title
  
  Proceedings of ISMA2012- USD2012 Conference
  
  Volume: (CD-ROM) Pages: 3033-3046
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560262
[Journal Article] Experimental study for a countermeasure against rifling mark generating phenomena on BTA deep hole drilling process2012
- Author(s)
  Takahiro Ryu, Kenichiro Matsuzaki, Keizo Tsukamoto, Katsushi Fujii, Yoshikazu Yuge, Shotaro Nakao, Takaaki Honda, Atsuo Sueoka
- Journal Title
  
  Proceedings of ISMA2012-USD2012 Conference
  
  Volume: CD-ROM Pages: 3071-3082
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560262
[Journal Article] Experimental study for a countermeasure against rifling mark generating phenomena on BTA deep hole drilling process2012
- Author(s)
  Takahiro Ryu, Kenichiro Matsuzaki, Keizo Tsukamoto, Katsushi Fujii, Yoshikazu Yuge, Shotaro Nakao, Takaaki Honda, Atsuo Sueoka
- Journal Title
  
  Proceedings of ISMA2012- USD2012 Conference
  
  Volume: (CD-ROM) Pages: 3071-3082
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560262
[Journal Article] A Study on Shudder in Automatic Transmission ...2011
- Author(s)
  劉孝宏，松崎健一郎，中江貴志他
- Journal Title
  
  SAE International
  
  Volume: 2011-01-1509
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560266
[Journal Article] BTA深穴加工におけるライフリングマーク発生現象の防止対策2010
- Author(s)
  松崎健一郎, 他3名
- Journal Title
  
  日本機械学会論文集C編
  
  Volume: 76-767 Pages: 1684-1691
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560219
[Journal Article] BTA深穴加工におけるライフリングマーク発生現象の防止対策2010
- Author(s)
  松崎健一郎, 末岡淳男, 劉孝宏, 森田英俊
- Journal Title
  
  日本機械学会論文集
  
  Volume: 76-767 Pages: 1684-1691
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560244
[Journal Article] BTA深穴加工におけるラアフリングマーク発生現象の防止対策2010
- Author(s)
  松崎健一郎, 末岡淳男, 劉孝宏, 森田英俊
- Journal Title
  
  日本機械学会論文集C編 76巻767号
  
  Pages: 1684-1691
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560219
[Journal Article] BTA深穴加工におけるライフリングマーク発生現象に関する基礎的研究2009
- Author(s)
  松崎健一郎, 末岡淳男, 劉孝宏, 森田英俊
- Journal Title
  
  日本機械学会論文集C編 75巻755号
  
  Pages: 1918-1925
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560219
[Journal Article] BTA深穴加工におけるライフリングマーク発生現象に関する基礎的研究2009
- Author(s)
  松崎健一郎
- Journal Title
  
  日本機械学会論文集, C編 75-755
  
  Pages: 1918-1925
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560244
[Journal Article] BTA深穴加工におけるライフリングマーク発生現象に関する基礎的研究2009
- Author(s)
  松崎健一郎
- Journal Title
  
  日本機械学会論文集 75-755
  
  Pages: 1918-1925
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560221
[Journal Article] Countermeasures against Pattern Formation Phenomena of Thin Sheet Winder by Using Dynamic Absorbers2009
- Author(s)
  劉孝宏, 松崎健一郎, 末岡淳男, 森田英俊
- Journal Title
  
  JSDD Vol.3, No.5
  
  Pages: 814-826
- NAID
  110006164395
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560221
[Journal Article] Countermeasure against Pattern Formation Phenomena of Roll-Covering Rubber2009
- Author(s)
  劉孝宏, 末岡淳男, 松崎健一郎, 森田英俊, 森裕介, 井上卓見
- Journal Title
  
  Asia-Pacific Vibration Conference CD-ROM.
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560221
[Journal Article] Study for Rifling Mark Generating Phenomena on BTA Deep Hole Drilling Process2009
- Author(s)
  Kenichiro MATSUZAKI, et al.
- Journal Title
  
  Proceedings of 13th Asia-Pacific Vibration Conference (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560244
[Journal Article] 集中系モデルによる非線形圧力波の解析(第1報, 解析モデルの提案とその妥当性の検証)2009
- Author(s)
  石川諭, 近藤孝広, 松崎健一郎
- Journal Title
  
  日本機械学会論文集, C編第75巻,第735号
  
  Pages: 1436-1443
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360109
[Journal Article] BTA深穴加工におけるライフリングマーク発生現象に関する基礎的研究2009
- Author(s)
  松崎健一郎, 末岡淳男, 劉孝宏, 森田英俊
- Journal Title
  
  日本機械学会論文集C 75-755
  
  Pages: 1918-1925
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560221
[Journal Article] Computational Efficiency and Accuracy of High-Performance Method of Vibration Analysis for a Large-Scale Nonlinear System Using the Method of Harmonic Balance2009
- Author(s)
  Takumi SASAKI, Takahiro KONDOU, Kenichiro MATSUZAKI, Nobuyuki SOWA
- Journal Title
  
  Proceedings of 13th Asia-Pacific Vibration Conference 21
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360109
[Journal Article] Study for Rifling Mark Generating Phenomena on BTA Deep Hole Drilling Process2009
- Author(s)
  Kenichiro MATSUZAKI, Atsuo SUEOKA, Takahiro RYU and Hidetoshi MORITA.
- Journal Title
  
  Proceedings of Asia-Pacific Vibration Conference 2009
  
  Volume: No.22
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560244
[Journal Article] BTA深穴加工におけるライフリングマーク発生現象に関する基礎的研究2009
- Author(s)
  松崎健一郎, 他3名
- Journal Title
  
  日本機械学会論文集C編 75-755
  
  Pages: 1918-1925
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560219
[Journal Article] Nonlinear Pressure Wave Analysis by Concentrated Mass Model (1st Report, Suggestion and Validity Verification of Analytic Model)2009
- Author(s)
  Satoshi ISHIKAWA, Takahiro KONDOU, Kenichiro MATSUZAKI
- Journal Title
  
  Journal of System Design and Dynamics 40607
  
  Pages: 827-840
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360109
[Journal Article] Generation Mechanism of Polygonal Wear of Work Rolls in a Hot Leveler and a Countermeasure by Dynamic Absorbers2008
- Author(s)
  Kenichiro Matsuzaki, Atsuo Sueoka, Takahiro Ryu and Hidetoshi Morita
- Journal Title
  
  International Journal of Machine Tools and Manu-facture 48
  
  Pages: 983-993
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560234
[Journal Article] Generation Mechanism of Polygonal Wear of Work Rolls in a Hot Leveler and a Countermeasure by Dynamic Absorbers2008
- Author(s)
  Kenichiro Matsuzaki, et al.
- Journal Title
  
  International Journal of Machine Tools and Manu-facture 48
  
  Pages: 983-993
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560234
[Journal Article] Generation mechanism of polygonal wear of work rolls in a hot leveler and a countermeasure by dynamic absorbers2008
- Author(s)
  松崎健一郎
- Journal Title
  
  Int. J. Machine Tools & Manufacture 48
  
  Pages: 983-993
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560221
[Journal Article] Polygonal Wear of Work Rolls in a Hot Leveler of Steel Making Machine (4th Report, Expenmental Verification of a Countermeasure by Using Dynamic Absorbers)2008
- Author(s)
  Kenichiro Matsuzaki, et al.
- Journal Title
  
  Journal of Environment and Engineering 3-1
  
  Pages: 146-157
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560234
[Journal Article] 大規模非線形系に対する高性能振動解析手法の開発(非線形支持された直線状はり構造物の曲げ振動への適用)2008
- Author(s)
  近藤孝広, 松崎健一郎, 宗和伸行, 佐々木卓実
- Journal Title
  
  日本機械学会論文集, C編第74巻,第747号
  
  Pages: 2626-2633
- NAID
  110006990316
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360109
[Journal Article] Polygonal Wear of Work Rolls in a Hot Leveler of Steel Making Machine(4th Report, Experimental Verification of a Countermeasure by Using Dynamic Ab-Absorbers)2008
- Author(s)
  Kenichiro Matsuzaki, Atsuo Sueoka, Takahiro Ryu and Hidetoshi Morita
- Journal Title
  
  Journal of Environment and Engineering 3-1
  
  Pages: 146-157
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560234
[Journal Article] Generation mechanism of polygonal wear of work rolls in a hot leveler and a countermeasure by dynamic absorbers2008
- Author(s)
  松崎健一郎, 末岡淳男, 劉孝宏, 森田英俊
- Journal Title
  
  International Journal of Machine Tools & Manufacture 48
  
  Pages: 983-993
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560221
[Journal Article] An Experimental Study of a Countermeasure for Pattern Formation Phenomena Accompanied by Wear by Using a Dynamic Absorber2007
- Author(s)
  Kenichiro, MATSUZAKI, Atsuo, SUEOKA, Takahiro, RYU, Hidetoshi, MORITA
- Journal Title
  
  Proc. of the 12th Asia-Pacific Vibration Conference No. 56
  
  Pages: 6-6
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360112
[Journal Article] Countermeasures against Pattern Formation Phenomena of Thin Sheet Winder by Using Dynamic Absorbers2007
- Author(s)
  Takahiro, RYU, Kenichiro, MATSUZAKI, Atsuo, SUEOKA, Hidetoshi, MORITA,Takumi, INOUE
- Journal Title
  
  Proc. of the 12th Asia-Pacific Vibration Conference No. 49
  
  Pages: 6-6
- NAID
  110006164395
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360112
[Journal Article] Countermeasures against Pattern Formation Phenomena of Thin Sheet Winder by using Dynamic Absorbers2007
- Author(s)
  Takahiro Ryu, Kenichiro Matsuzaki, Atsuo Sueoka, Hidetoshi Morita, Takumi Inoue
- Journal Title
  
  Proceedings of the Asia-Pacific ViVibration Conference 2007 Paper No.49
- NAID
  130000132930
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560234
[Journal Article] An Experimental Study of a Countermeasure for Pattern Formation Phenomena Accompanied by Wear by using a Dynamic Absorber2007
- Author(s)
  Kenichiro Matsuzaki, Atsuo Sueoka, Takahiro Ryu, Hidetoshi Morita
- Journal Title
  
  Proceedings of the Asia-Pacific Vibration Conference 2007 Paper No.56
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560234
[Journal Article] Countermeasures against Pattern Formation Phenomena of Thin Sheet Winder by Using Dynamic Absorbers2007
- Author(s)
  Takahiro, RYU, Kenichiro, MATSUZAKI, Atsuo, SUEOKA, Hidetoshi, MORITA
- Journal Title
  
  Transaction of Japan Society of Mechanical Engineer, Series C Vol. 73, No. 725
  
  Pages: 98-106
- NAID
  110006164395
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360112
[Journal Article] An Experimental Study of a Countermeasure for Pattern Formation Phenomena Accompanied by Wear by using a Dynamic Absorbe2007
- Author(s)
  Kenichiro MATSUZAKI, et. al.
- Journal Title
  
  Proceedings of 12th Asia-Pacific Vibration Conference (CD-ROM)
  
  Pages: 56-56
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560234
[Journal Article] 製鉄機械ホットレベラのワークロールに発生する多角形摩耗(第4報,動吸振器を用いた遅延対策の実験的検証)2006
- Author(s)
  松崎健一郎, ほか
- Journal Title
  
  日本機械学会論文集(C編) 72-724
  
  Pages: 3703-3710
- NAID
  110006153457
- Data Source
  KAKENHI-PROJECT-18360112
[Journal Article] 製鉄機会ホットレベラのワークロールに発生する多角形磨耗 (第4報,動吸振器を用いた遅延対策の実験的検証)2006
- Author(s)
  松崎健一郎
- Journal Title
  
  日本機械学会論文集(C編) 72・724
  
  Pages: 3703-3710
- Data Source
  KAKENHI-PROJECT-17360108
[Journal Article] 製鉄機械ホットレベラのワークロールに発生する多角形摩耗(第4報,動吸振器を用いた遅延対策の実験的検証)2006
- Author(s)
  松崎健一郎, 他5名
- Journal Title
  
  日本機械学会論文集(C編) 72
  
  Pages: 3703-3710
- NAID
  110006153457
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360112
[Journal Article] Polygonal Wear of Work Rolls in a Hot Leveler of Steel Making Machine (4th Report, Experimental Verification of a Countermeasure by Using Dynamic Absorbers)2006
- Author(s)
  Kenichiro MATSUZAKI
- Journal Title
  
  Transaction of the JSME, Series C Vol.72,No.724
  
  Pages: 3703-3710
- NAID
  130000076973
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360108
[Journal Article] 製鉄機械ホットレベラのワークロールに発生する多角形摩耗(第4報,動吸振器を用いた遅延対策の実験的検証)2006
- Author(s)
  松崎健一郎
- Journal Title
  
  日本機械学会論文集(C編) 72・724
  
  Pages: 3703-3710
- NAID
  110006153457
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360108
[Journal Article] Polygonal Wear of Work Rolls in a Hot Leveler of Steel Making Machine (4th Report, Experimental Verification of a Countermeasure by Using Dynamic Absorbers)2006
- Author(s)
  Kenichiro, MATSUZAKI, Atsuo, SUEOKA, Takahiro, RYU, Hidetoshi, MORITA, Kohei, HIDATA, Satoshi, NOGUCHI
- Journal Title
  
  Transaction of Japan Society of Mechanical Engineer, Series C Vol. 72, No. 724
  
  Pages: 3703-3710
- NAID
  110006153457
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360112
[Journal Article] 製鉄機械ホットレベラのワークロールに発生する多角形摩耗(第3報,動吸振器を用いた多角形摩耗の防止・遅延対策)2005
- Author(s)
  松崎健一郎
- Journal Title
  
  日本機械学会論文集(C編) 71・704
  
  Pages: 1123-1130
- NAID
  110006264643
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360108
[Journal Article] 製鉄機械ホットレベラのワークロールに発生する多角形摩耗(第3報,動吸振器を用いた多角形摩耗の防止・遅延対策)2005
- Author(s)
  松崎健一郎
- Journal Title
  
  日本機械学会論文集(C編) (発表予定)
- NAID
  110006264643
- Data Source
  KAKENHI-PROJECT-15360123
[Journal Article] 製鉄機械ホットレベラのワークロールに発生する多角形摩耗(第3報,動吸振器を用いた多角形摩耗の防止・遅延対策)2005
- Author(s)
  松崎健一郎
- Journal Title
  
  日本機械学会論文集(C編) (印刷中)
- NAID
  110006264643
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360123
[Journal Article] Polygonal Wear of Work Rolls in a Hot Leveler of Steel Making Machine (3rd Report, A Countermeasure by Using Dynamic Absorbers)2005
- Author(s)
  Kenichiro MATSUZAKI
- Journal Title
  
  Transaction of the JSME, Series C Vol.71,No.704
  
  Pages: 1123-1130
- NAID
  110006264643
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360108
[Journal Article] Study for Motion Control of a Flexible Arm Using Sliding-Mode Control2005
- Author(s)
  Kenichiro MATSUZAKI et al.
- Journal Title
  
  Proceedings of 11th Asia-Pacific Vibration Conference Vol.1
  
  Pages: 216-221
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360108
[Journal Article] Study for Motion Control of a Flexible Arm Using Sliding-Mode Control2005
- Author(s)
  Kenichiro MATSUZAKI
- Journal Title
  
  Proceedings of 11th Asia-Pacific Vibration Conference Vol.1
  
  Pages: 216-221
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360108
[Journal Article] Polygonal Wear of Work Rolls in a Hot Leveler of Steel Making Machine (3rd Report, A Countermeasure by Using Dynamic Absorbers)2005
- Author(s)
  Kenichiro MATSUZAKI
- Journal Title
  
  Transaction of Japan Society of Mechanical Engineer Vol.70, No.705(in printing)
- NAID
  110006264643
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360123
[Journal Article] Polygonal Wear of Work Rolls in a Hot Leveler of Steel Making Machine (2nd Report, Initial Design of a Leveler and a Countermeasure by Changing Operating Speed)2003
- Author(s)
  Kenichiro MATSUZAKI
- Journal Title
  
  Transaction of Japan Society of Mechanical Engineer Vol.69, No.686
  
  Pages: 2525-2532
- NAID
  110002379164
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360123
[Journal Article] 製鉄機械ホットレベラのワークロールに発生する多角形摩耗 (第2報,レベラの初期設計と運転回転数切替による遅延対策)2003
- Author(s)
  松崎健一郎
- Journal Title
  
  日本機械学会論文集(C編) 69-686
  
  Pages: 2525-2532
- NAID
  110002379164
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360123
[Journal Article] 製鉄機械ホットレベラのワークロールに発生する多角形摩耗(第2報,レベラの初期設計と運転回転数切替による遅延対策)2003
- Author(s)
  松崎健一郎
- Journal Title
  
  日本機械学会論文集(C編) 69・686
  
  Pages: 2525-2532
- NAID
  110002379164
- Data Source
  KAKENHI-PROJECT-15360123
[Patent] 振動減衰装置2015
- Inventor(s)
  劉孝宏，中江貴志，松崎健一郎，滝川由浩ほか３名
- Industrial Property Rights Holder
  鹿児島大学，アイシン・エィ・ダブリュ株式会社，大分大学
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2015-226653
- Filing Date
  2015-11-19
- Data Source
  KAKENHI-PROJECT-15K05866
[Patent] 切削加工用先端工具のガイド配置構造及びガイド配置法2013
- Inventor(s)
  松崎健一,劉孝宏,塚本恵三,藤井勝志
- Industrial Property Rights Holder
  国立大学法人九州大学,国立大学法人大分大学,株式会社アヤボ
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2013-001568
- Filing Date
  2013-01-09
- Overseas
- Data Source
  KAKENHI-PROJECT-23560262
[Patent] 切削加工用先端工具のガイド部配置構造及びガイド部配置方法2013
- Inventor(s)
  松崎健一郎，劉孝宏，塚本恵三，藤井勝志
- Industrial Property Rights Holder
  国立大学法人九州大学，国立大学法人大分大学，株式会社アヤボ
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2013-001568
- Filing Date
  2013-01-09
- Data Source
  KAKENHI-PROJECT-23560262
[Patent] 深穴加工用先端工具ガイド部配置構造及びガイド部配置方法2008
- Inventor(s)
  松崎健一郎, 末岡淳男, 劉孝宏, 森田英俊
- Industrial Property Rights Holder
  国立大学法人九州大学
- Industrial Property Number
  2008-334663
- Filing Date
  2008-12-26
- Data Source
  KAKENHI-PROJECT-20560221
[Patent] 深穴加工用先端工具のガイド部配置構造及びガイド部配置方法2008
- Inventor(s)
  松崎健一郎, 他3名
- Industrial Property Rights Holder
  九州大学,国立高等専門学校機構
- Industrial Property Number
  2008-334663
- Filing Date
  2008-12-26
- Data Source
  KAKENHI-PROJECT-20560219
[Presentation] NONLINEAR SLOSHING ANALYSIS BY USING CONCENTRATED MASS MODEL2019
- Author(s)
  Yoshitake Tatsuhiro, Satoshi Ishikawa, Takahiro Kondou, Kenichiro Matsuzaki
- Organizer
  26th International Congress on Sound and Vibration
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03191
[Presentation] BTA深穴加工におけるライフリングマークの検出方法に関する研究2018
- Author(s)
  三井名亮祐，劉孝宏，松崎健一郎，末岡淳男，塚本恵三
- Organizer
  Dynamics & Design Conference 2018
- Data Source
  KAKENHI-PROJECT-17H03191
[Presentation] 集中系モデルによるスロッシングと弾性体振動の連成振動の解析2018
- Author(s)
  吉武達弘，石川諭，近藤孝広，松崎健一郎
- Organizer
  Dynamics & Design Conference 2018
- Data Source
  KAKENHI-PROJECT-17H03191
[Presentation] リーマ加工における加工穴多角形化現象の数値解析（リーマの曲げ振動を考慮した場合）2018
- Author(s)
  岩寛侑，松崎健一郎，劉孝宏，末岡淳男，塚本恵三
- Organizer
  Dynamics & Design Conference 2018
- Data Source
  KAKENHI-PROJECT-17H03191
[Presentation] 集中系モデルによるスロッシング現象の解析2017
- Author(s)
  吉武達弘, 石川諭, 近藤孝広, 松崎健一郎
- Organizer
  Dynamics & Design Conference 2017
- Data Source
  KAKENHI-PROJECT-17H03191
[Presentation] 大規模非線形系に対する高性能振動解析手法の開発（合理的な高次モード消去法）2017
- Author(s)
  兼冨　友希, 近藤孝広, 住川大樹, 宗和伸行, 松崎健一郎
- Organizer
  Dynamics & Design Conference 2017
- Data Source
  KAKENHI-PROJECT-17H03191
[Presentation] リーマ加工における加工穴多角形化現象の数値解析（工具回転の場合）2016
- Author(s)
  園田大樹，松崎健一郎，劉孝宏，末岡淳男，塚本恵三
- Organizer
  日本機械学会2016年度年次大会
- Place of Presentation
  九州大学（福岡県・福岡市）
- Year and Date
  2016-09-11
- Data Source
  KAKENHI-PROJECT-26420179
[Presentation] リーマ加工における加工穴多角形化現象の数値計算2015
- Author(s)
  眞方山航平，松崎健一郎，劉孝宏，末岡淳男，塚本恵三
- Organizer
  日本機械学会 Dynamics and Design Conference 2015
- Place of Presentation
  弘前大学（青森県・弘前市）
- Year and Date
  2015-08-28
- Data Source
  KAKENHI-PROJECT-26420179
[Presentation] リーマ加工における穴多角形化現象の発生メカニズムに関する研究2014
- Author(s)
  眞方山航平，松崎健一郎，劉孝宏，末岡淳男
- Organizer
  日本機械学会九州支部大分講演会
- Place of Presentation
  大分ホルトホール（大分県・大分市）
- Year and Date
  2014-09-20
- Data Source
  KAKENHI-PROJECT-26420179
[Presentation] BTA深穴加工におけるスパイラルマーク発生メカニズムに関する実験的研究2014
- Author(s)
  平瀬圭太，劉孝宏，松崎健一郎，塚本恵三，藤井勝志，末岡淳男
- Organizer
  日本機械学会九州支部大分講演会
- Place of Presentation
  大分ホルトホール（大分県・大分市）
- Year and Date
  2014-09-20
- Data Source
  KAKENHI-PROJECT-26420179
[Presentation] BTA実機のボーリングバー支持状態を考慮したライフリングマーク発生現象の数値解析2013
- Author(s)
  松崎健一郎，眞方山航平，劉孝宏，末岡淳男，塚本恵三
- Organizer
  日本機械学会九州支部鹿児島講演会
- Place of Presentation
  鹿児島市
- Data Source
  KAKENHI-PROJECT-23560262
[Presentation] BTA深穴加工におけるライフリングマークの防止対策に対する実験的研究2013
- Author(s)
  本田貴晶,劉孝宏,松崎健一,塚本恵三,藤井勝志,弓削義和,末岡淳男
- Organizer
  本機械学会D&D2013
- Place of Presentation
  福岡市
- Data Source
  KAKENHI-PROJECT-23560262
[Presentation] Analysis of nonlinear pressure wave in elastic pipe by concentrated mass model2013
- Author(s)
  ISHIKAWA Satoshi, Takahiro KONDOU, Kenichiro MATSUZAKI, Shota NAGANO
- Organizer
  15th Asia-Pacific Vibration Conference
- Place of Presentation
  Jeju, Korea
- Data Source
  KAKENHI-PROJECT-24360091
[Presentation] Experimental Study on the Mechanism and Countermeasures of Rifling Mark Generation in BTA Deep Hole Drilling Process2013
- Author(s)
  Takaaki Honda, Takahiro Ryu, Kenichiro Matsuzaki, Keizo Tsukamoto, Katsushi Fujii, Yoshikazu Yuge, Atsuo Sueoka
- Organizer
  15th Asia-Pacific Vibration Conference
- Place of Presentation
  Jeju,Korea
- Data Source
  KAKENHI-PROJECT-23560262
[Presentation] BTA 深穴加工におけるライフリングマークの防止対策に対する実験的研究2013
- Author(s)
  本田貴晶，劉孝宏，松崎健一郎，塚本恵三，藤井勝志，弓削義和，末岡淳男
- Organizer
  日本機械学会D&D2013
- Place of Presentation
  福岡市
- Data Source
  KAKENHI-PROJECT-23560262
[Presentation] Experimental Study on the Mechanism and Countermeasures of Rifling Mark Generation in BTA Deep Hole Drilling Process2013
- Author(s)
  Takaaki Honda, Takahiro Ryu, Kenichiro Matsuzaki, Keizo Tsukamoto, Katsushi Fujii, Yoshikazu Yuge, Atsuo Sueoka
- Organizer
  15th Asia-Pacific Vibration Conference
- Place of Presentation
  Jeju, Korea
- Data Source
  KAKENHI-PROJECT-23560262
[Presentation] BTA実機のボーリングバー支持状態を考慮したライフリングマーク発生現象の数値解析2013
- Author(s)
  松崎健一,眞山航平,劉孝宏,末岡淳男,塚本恵三
- Organizer
  本機械学会九州支鹿児島講演会
- Place of Presentation
  鹿児島市
- Year and Date
  2013-09-28
- Data Source
  KAKENHI-PROJECT-23560262
[Presentation] Experimental study for a countermeasure against rifling mark generating phenomena on BTA deep hole drilling process2012
- Author(s)
  Takahiro Ryu, Kenichiro Matsuzaki, Keizo Tsukamoto, Katsushi Fujii, Yoshikazu Yuge, Shotaro Nakao, Takaaki Honda, Atsuo Sueoka
- Organizer
  ISMA2012- USD2012 Conference
- Place of Presentation
  Leuven,Belgium
- Data Source
  KAKENHI-PROJECT-23560262
[Presentation] Experimental study for a countermeasure against rifling mark generating phenomena on BTA deep hole drilling process2012
- Author(s)
  Takahiro Ryu, Kenichiro Matsuzaki, Keizo Tsukamoto, Katsushi Fujii, Yoshikazu Yuge, Shotaro Nakao, Takaaki Honda, Atsuo Sueoka
- Organizer
  ISMA2012-USD2012 Conference
- Place of Presentation
  Leuven, Belgium
- Data Source
  KAKENHI-PROJECT-23560262
[Presentation] Numerical study for rifling mark generating phenomena on BTA deep hole drilling process2012
- Author(s)
  Kenichiro Matsuzaki, Takahiro Ryu, Atsuo Sueoka, Keizo Tsukamoto, Takaaki Honda
- Organizer
  ISMA2012-USD2012 Conference
- Place of Presentation
  Leuven,Belgium
- Data Source
  KAKENHI-PROJECT-23560262
[Presentation] Numerical study for rifling mark generating phenomena on BTA deep hole drilling process2012
- Author(s)
  Kenichiro Matsuzaki, Takahiro Ryu, Atsuo Sueoka, Keizo Tsukamoto, Takaaki Honda
- Organizer
  ISMA2012-USD2012 Conference
- Place of Presentation
  Leuven, Belgium
- Data Source
  KAKENHI-PROJECT-23560262
[Presentation] BTA深穴加工におけるライフリングマーク発生現象の防止対策―実験的考察―2011
- Author(s)
  中尾翔太,松崎健一,劉孝宏,末岡淳男,大村和久
- Organizer
  本機械学会D&D2011
- Place of Presentation
  高知県香美市
- Year and Date
  2011-09-05
- Data Source
  KAKENHI-PROJECT-23560262
[Presentation] ゴム巻きロールのパターン形成現象の防止対策-ロール間の接触角の影響-2011
- Author(s)
  中尾翔太郎, 劉孝宏, 松崎健一郎, 末岡淳男, 森裕介
- Organizer
  機構論,No.,118-1,pp.,189-190
- Place of Presentation
  福岡市
- Data Source
  KAKENHI-PROJECT-20560221
[Presentation] ゴム巻きロールのパターン形成現象の防止対策2010
- Author(s)
  森裕介, 劉孝宏, 松崎健一郎, 末岡淳男, 森田英俊, 大村和久
- Organizer
  -直径比の影響-,D&D
- Place of Presentation
  京田辺市(CD-ROM)
- Data Source
  KAKENHI-PROJECT-20560221
[Presentation] ゴム巻きロールのパターン形成現象の防止対策(可変剛性型動吸振器による防止・遅延対策)2010
- Author(s)
  森裕介, 劉孝宏, 松崎健一郎, 末岡淳男, 森田英俊
- Organizer
  機構論,No.105-2,pp.69-70
- Place of Presentation
  徳島市
- Data Source
  KAKENHI-PROJECT-20560221
[Presentation] Study for Rifling Mark Generating Phenomena on BTA Deep Hole Drilling Process2009
- Author(s)
  Kenichiro MATSUZAKI.
- Organizer
  Proceedings of Asia-Pacific Vibration Conference 2009
- Place of Presentation
  Christchurch, NZ
- Year and Date
  2009-08-04
- Data Source
  KAKENHI-PROJECT-21560244
[Presentation] Study for Rifling Mark Generating Phenomena on BTA Deep Hole Drilling Process2009
- Author(s)
  松崎健一郎
- Organizer
  13th Asia-Pacific Vibration Conference
- Place of Presentation
  Christchurch, New Zealand.
- Year and Date
  2009-11-24
- Data Source
  KAKENHI-PROJECT-20560219
[Presentation] BTA深穴加工におけるライフリングマーク発生現象の防止対策に関する検討2009
- Author(s)
  松崎健一郎
- Organizer
  Dynamics & Design Conference 2009
- Place of Presentation
  北海道大学
- Year and Date
  2009-08-04
- Data Source
  KAKENHI-PROJECT-21560244
[Presentation] BTA深穴加工におけるライフリングマーク発生現象の防止対策に関する検討2009
- Author(s)
  松崎健一郎, 末岡淳男, 劉孝宏, 森田英俊
- Organizer
  D&D
- Place of Presentation
  札幌市(CD-ROM)
- Data Source
  KAKENHI-PROJECT-20560221
[Presentation] BTA深穴加工におけるライフリングマーク発生現象の防止対策に関する検討2009
- Author(s)
  松崎健一郎
- Organizer
  日本機械学会D&D2009
- Place of Presentation
  北海道大学
- Year and Date
  2009-08-04
- Data Source
  KAKENHI-PROJECT-20560219
[Presentation] BTA深穴加工におけるライフリングマーク発生現象の防止対策に関する検討2009
- Author(s)
  松崎健一郎
- Organizer
  Dynamics and Design Conference 2009
- Place of Presentation
  札幌市
- Year and Date
  2009-08-04
- Data Source
  KAKENHI-PROJECT-21560244
[Presentation] 集中系モデルによる非線形圧力波の解析2009
- Author(s)
  石川諭, 近藤孝広, 松崎健一郎
- Organizer
  日本機械学会Dynamics and Design Conference 2009
- Place of Presentation
  札幌市
- Year and Date
  2009-08-07
- Data Source
  KAKENHI-PROJECT-19360109
[Presentation] Study for Rifling Mark Generating Phenomena on BTA Deep Hole Drilling Process2009
- Author(s)
  松崎健一郎, et al
- Organizer
  13th Asia-Pacific Vibration Conference
- Place of Presentation
  Christchurch, New Zealand
- Year and Date
  2009-11-24
- Data Source
  KAKENHI-PROJECT-20560219
[Presentation] 対をなすゴム巻きロールの粘弾性変形を考慮したパターン形成現象の防止対策2009
- Author(s)
  劉孝宏, 松崎健一郎, 末岡淳男, 森田英俊, 森裕介
- Organizer
  D&D
- Place of Presentation
  札幌市(CD-ROM)
- Data Source
  KAKENHI-PROJECT-20560221
[Presentation] BTA深穴加工におけるライフリングマーク発生現象の防止対策に関する検討2009
- Author(s)
  松崎健一郎, 他3名
- Organizer
  日本機械学会 D&D2009
- Place of Presentation
  札幌市
- Year and Date
  2009-08-04
- Data Source
  KAKENHI-PROJECT-20560219
[Presentation] 大規模非線形系の高性能振動解析法に対する計算効率・計算精度の検討2009
- Author(s)
  佐々木卓実, 近藤孝広, 松崎健一郎, 宗和伸行
- Organizer
  日本機械学会Dynamics and Design Conference 2009
- Place of Presentation
  札幌市
- Year and Date
  2009-08-03
- Data Source
  KAKENHI-PROJECT-19360109
[Presentation] BTA深穴加工におけるライフリングマーク発生現象の防止対策に関する検討2009
- Author(s)
  松崎健一郎
- Organizer
  D&D Conf.2009
- Place of Presentation
  北海道大学
- Year and Date
  2009-08-04
- Data Source
  KAKENHI-PROJECT-20560221
[Presentation] 大規模非線形系に対する高性能振動解析手法の開発(非比例減衰系への適用)2009
- Author(s)
  岩崎真人, 近藤孝広, 松崎健一郎, 宗和伸行, 佐々木卓実, 千代田昭三
- Organizer
  日本機械学会Dynamics and Design Conference 2009
- Place of Presentation
  札幌市
- Year and Date
  2009-08-06
- Data Source
  KAKENHI-PROJECT-19360109
[Presentation] 大規模非線形系に対する高性能振動解析手法の開発(大域的非線形系への適用)2009
- Author(s)
  千代田昭三, 近藤孝広, 松崎健一郎, 宗和伸行, 佐々木卓実, 岩崎真人
- Organizer
  日本機械学会Dynamics and Design Conference 2009
- Place of Presentation
  札幌市
- Year and Date
  2009-08-06
- Data Source
  KAKENHI-PROJECT-19360109
[Presentation] 摩耗によるパターン形成現象(多角形摩耗の成長過程)2008
- Author(s)
  森田英俊, 末岡淳男, 松崎健一郎, 劉孝宏
- Organizer
  D&D
- Place of Presentation
  川崎市(CD-ROM)
- Data Source
  KAKENHI-PROJECT-20560221
[Presentation] パッドの分布接触を考慮したBTA深穴加工におけるパターン形成現象の解明2008
- Author(s)
  徳久篤弘, 末岡淳男, 松崎健一郎, 劉孝宏, 森田英俊
- Organizer
  D&D
- Place of Presentation
  川崎市(CD-ROM)
- Data Source
  KAKENHI-PROJECT-20560221
[Presentation] 大規模非線形系に対する高性能振動解析手法の開発(非線形支持された回転軸系への適用)2008
- Author(s)
  土村慎吾, 近藤孝広, 松崎健一郎, 宗和伸行, 佐々木卓実
- Organizer
  日本機械学会Dynamics and Design Conference 2008
- Place of Presentation
  東京都
- Year and Date
  2008-09-03
- Data Source
  KAKENHI-PROJECT-19360109
[Presentation] ゴム巻きロールのパターン形成現象の防止対策2008
- Author(s)
  松岡毅, 劉孝宏, 末岡淳男, 松崎健一郎, 森田英俊
- Organizer
  D&D
- Place of Presentation
  川崎市(CD-ROM)
- Data Source
  KAKENHI-PROJECT-20560221
[Presentation] ゴム巻きロールのパターン形成現象の防止対策2007
- Author(s)
  村元秀次, 劉孝宏, 末岡淳男, 松崎健一郎, 森田英俊
- Organizer
  日本機械学会Dynamics and Design Conference 2007
- Place of Presentation
  東広島市
- Year and Date
  2007-09-25
- Data Source
  KAKENHI-PROJECT-19560234
[Presentation] An Experimental Study of a Countermeasure Accompanied by Wear by using a Dynamic Absorber2007
- Author(s)
  Kenichiro Matsuzaki, Atsuo Sueoka, Takahiro Ryu, Hidetoshi Morita
- Organizer
  Asia-Pacific Vibration Conference 2007
- Place of Presentation
  Sapporo, Japan
- Year and Date
  2007-08-06
- Data Source
  KAKENHI-PROJECT-19560234
[Presentation] 大規模非線形系に対する高性能振動解析手法の開発2007
- Author(s)
  近藤大介, 近藤孝広, 松崎健一郎, 宗和伸行, 佐々木卓実, 土村慎吾
- Organizer
  日本機械学会Dynamics and Design Conference 2008
- Place of Presentation
  東広島市
- Year and Date
  2007-09-25
- Data Source
  KAKENHI-PROJECT-19360109
[Presentation] An Experimental Study of a Countermeasure for Pattern Formation Phenomena Accompanied by Wear by Using a Dynamic Absorber2007
- Author(s)
  Kenichiro, MATSUZAKI, et. al.
- Organizer
  The 12th Asia-Pacific Vibration Conference
- Place of Presentation
  Hokkaido University
- Year and Date
  2007-08-06
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360112
[Presentation] Countermeasures against Pattern Formation Phenomena of Thin Sheet Winder by using Dynamic Absorbers2007
- Author(s)
  Takahiro Ryu, Kenichiro Matsuzaki, Atsuo Sueoka, Hidetoshi Morita, Takumi Inoue
- Organizer
  Asia-Pacific Vibration Conference 2007
- Place of Presentation
  Sapporo, Japan
- Year and Date
  2007-08-06
- Data Source
  KAKENHI-PROJECT-19560234
[Presentation] 固有振動数成分除去法による天井走行クレーンの制振（非線形性および減衰の取り扱い）
- Author(s)
  溝田徹, 近藤孝広, 牛島滋, 松崎健一郎, 宗和伸行
- Organizer
  Dynamics & Design Conference 2014
- Place of Presentation
  上智大学（東京都）
- Year and Date
  2014-08-26 – 2014-08-29
- Data Source
  KAKENHI-PROJECT-24360091
[Presentation] 大規模非線形系に対する高性能振動解析手法の開発(非対称系に対する低次元化法の改良)
- Author(s)
  大江広明, 近藤孝広, 松崎健一郎, 宗和伸行, 佐々木卓実
- Organizer
  Dynamics & Design Conference 2014
- Place of Presentation
  上智大学（東京都）
- Year and Date
  2014-08-26 – 2014-08-29
- Data Source
  KAKENHI-PROJECT-24360091
[Presentation] 部分空間制御法を用いた倒立振子の振り上げ制御
- Author(s)
  後藤元太, 近藤孝広, 松崎健一郎, 宗和伸行
- Organizer
  Dynamics & Design Conference 2014
- Place of Presentation
  上智大学（東京都）
- Year and Date
  2014-08-26 – 2014-08-29
- Data Source
  KAKENHI-PROJECT-24360091

1. RYU Takahiro (60230877)

# of Collaborated Projects: 16 results

# of Collaborated Products: 52 results
2. KONDOU Takahiro (80136522)

# of Collaborated Projects: 12 results

# of Collaborated Products: 19 results
3. SOWA Nobuyuki (40304753)

# of Collaborated Projects: 10 results

# of Collaborated Products: 11 results
4. SUEOKA Atsuo (80038083)

# of Collaborated Projects: 8 results

# of Collaborated Products: 4 results
5. BONKOBARA Yasuhiro (10294886)

# of Collaborated Projects: 8 results

# of Collaborated Products: 0 results
6. INOUE Takumi (40274485)

# of Collaborated Projects: 6 results

# of Collaborated Products: 1 results
7. 中江貴志 (80579730)

# of Collaborated Projects: 3 results

# of Collaborated Products: 6 results
8. ISHIKAWA Satoshi (60612124)

# of Collaborated Projects: 2 results

# of Collaborated Products: 5 results
9. SASAKI Takumi (80343432)

# of Collaborated Projects: 1 results

# of Collaborated Products: 7 results
10. TAMURA Hideyuki (20037724)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. OKABE Tadashi (00185464)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. XU Zhixiang (90264077)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. 高山佳久 (00253493)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. 森博輝 (50451737)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

MATSUZAKI Kenichiro 松崎 健一郎

Research Projects

Research Products

Co-Researchers

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Countermeasure against polygonal deformation phenomenon of borehole in boring processPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study for Vibration Suppression method of Tool in BTA Deep Hole Drilling ProcessPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study for generation mechanism and countermeasures of vibration on BTA Deep Hole Drilling ProcessPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

MATSUZAKI Kenichiro 松崎健一郎