• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Hisamori Noriyuki  久森 紀之

… Alternative Names

HISAMORI Noriyuki  久森 紀之

Less
Researcher Number 80317510
Other IDs
  • ORCIDhttps://orcid.org/0000-0003-1903-5505
External Links
Affiliation (Current) 2025: 上智大学, 理工学部, 教授
Affiliation (based on the past Project Information) *help 2024: 上智大学, 理工学部, 教授
2018 – 2021: 上智大学, 理工学部, 教授
2010 – 2018: 上智大学, 理工学部, 准教授
2007: Sophia University, 理工学部, 助教
2000 – 2006: 上智大学, 理工学部, 助手
Review Section/Research Field
Principal Investigator
Materials/Mechanics of materials / Basic Section 18010:Mechanics of materials and materials-related / Materials/Mechanics of materials
Except Principal Investigator
Materials/Mechanics of materials / Structural/Functional materials
Keywords
Principal Investigator
チタン合金 / 生体材料 / 医療・福祉 / 機械材料・材料力学 / 解析・評価 / 微細構造 / 組織・結晶構造 / 疲労特性 / 表面・界面物性 / 先端機能デバイス … More / 機能性 / 脊椎インプラントデバイス / ショットピーニング / 関節運動器 / 変態プロセス / 組織・微細構造 / 積層造形 / プラズマ加工 / 材呂加工・処理 / アパタイトコーティング / 材料加工・処理 / アパタイト / 不動態 / アバタイト / 疲労 / 腐食 / 生体適合性 / 生体融和 / 生体組織 / 破壊靱性 / 力学的強度 / 生体活性機能 / 生体環境 / 破壊靭性 / 力学特性 / 生体活性材料 / ハイドロキシアパタイト / in vitro … More
Except Principal Investigator
HA / ハイドロキシアパタイト / チタン合金 / Titanium alloy / Biomaterials / Fine Particle Bonbardment / Cell culture / Surface modification / ELID Grinding / 微粒子ピーニング処理 / 表面改質 / 耐摩耗特性 / 耐食性 / 生体適合性 / 研削 / 微粒子ピーニング / 骨芽細胞 / マクロファージ / 細胞毒性評価 / 表面改質加工 / ELID研削 / Fracture toughness / Titanium alloys / In vivo Examination / In vitro Examination / PMMA composite / Hydroxyap atite / Bone-like composite / 破壊靭性 / Ti-6Al-4V合金 / in vivo / in vitro / PMMAコンポジット / 骨類似コンポジット / ポリシラザン / アパタイト / OH基 / X線回折 / 人工歯根 / FTIR分析 / 生体適合性評価 / 生体活性材料 Less
  • Research Projects

    (11 results)
  • Research Products

    (72 results)
  • Co-Researchers

    (5 People)
  •  低弾性高力学機能を有するチタン合金ロッドの脊椎骨モデルを援用した高疲労特性の評価Principal Investigator

    • Principal Investigator
      久森 紀之
    • Project Period (FY)
      2024 – 2026
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 18010:Mechanics of materials and materials-related
    • Research Institution
      Sophia University
  •  3D modeling construction of transformation process of microstructure / crystal structure aiming at improvement of fatigue strength of joint locomotoriumPrincipal Investigator

    • Principal Investigator
      Hisamori Noriyuki
    • Project Period (FY)
      2019 – 2021
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 18010:Mechanics of materials and materials-related
    • Research Institution
      Sophia University
  •  Construction of integrated creation technology of high fatigue resistance and bone function addition of 3D modeling custom articulatorPrincipal Investigator

    • Principal Investigator
      hisamori noriyuki
    • Project Period (FY)
      2016 – 2018
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Sophia University
  •  Construction of high strength and bone conduction grant technology of medical titanium alloy by electron beam additive fabricationPrincipal Investigator

    • Principal Investigator
      HISAMORI NORIYUKI
    • Project Period (FY)
      2013 – 2015
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Sophia University
  •  Production and bone conduction ability grant technology of medicalTi-6Al-4V shaped by laser sinteringPrincipal Investigator

    • Principal Investigator
      HISAMORI Noriyuki
    • Project Period (FY)
      2010 – 2012
    • Research Category
      Grant-in-Aid for Young Scientists (B)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Sophia University
  •  生体融和チタン合金の自家骨結合過程における腐食疲労挙動とその機構の解明Principal Investigator

    • Principal Investigator
      久森 紀之
    • Project Period (FY)
      2005 – 2007
    • Research Category
      Grant-in-Aid for Young Scientists (B)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Sophia University
  •  ポリシラザンを利用したシリカ膜の創製と生体適合性の評価

    • Principal Investigator
      KOMOTORI Jun
    • Project Period (FY)
      2004 – 2005
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Keio University
  •  Surface modification and its mechanisms by in-process grinding technique

    • Principal Investigator
      KOMOTORI Jun
    • Project Period (FY)
      2004 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Keio University
  •  生体骨組織を誘起する生体融和チタン合金の創成と生体適合性Principal Investigator

    • Principal Investigator
      久森 紀之
    • Project Period (FY)
      2002 – 2004
    • Research Category
      Grant-in-Aid for Young Scientists (B)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Sophia University
  •  Quasi tissue engineering of Process for Fabrication of Multi-Functional Composites

    • Principal Investigator
      TAKAI Kenichi, 野末 章
    • Project Period (FY)
      2001 – 2002
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Structural/Functional materials
    • Research Institution
      Sophia University
  •  バイオアパタイトセラミックのin vitro生体活性機能と力学的強度Principal Investigator

    • Principal Investigator
      久森 紀之
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Sophia University

All 2022 2021 2018 2017 2016 2015 2014 2013 2012 2011 2010 2007 2006 2005 2004 Other

All Journal Article Presentation Book Patent

  • [Book] Advances in Metallic Biomaterials: Processing and Applications2015

    • Author(s)
      Noriyuki HISAMORI
    • Total Pages
      281
    • Publisher
      Springer Series in Biomaterials Science and Engineering
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Book] バイオマテリアル研究の最前線2014

    • Author(s)
      久森紀之(分担)
    • Total Pages
      248
    • Publisher
      公益社団法人日本金属学会編
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Book] 日本機械学会誌Vol1182014

    • Author(s)
      久森紀之
    • Total Pages
      68
    • Publisher
      日本機械学会
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Book] 未来型人工関節を目指して ーその歴史から将来展望までー2013

    • Author(s)
      久森紀之 分担
    • Total Pages
      6
    • Publisher
      日本医学館
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Book] 破壊力学大系-壊れない製品設計へ向けて-第2編第2章1節「生体材料」2011

    • Author(s)
      久森紀之(分担)
    • Total Pages
      490
    • Publisher
      エヌ・ティー・エス
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Book] 壊れない製品設計へ向けて- 第2 編第2 章 1 節「生体材料」(2011)4902011

    • Author(s)
      久森紀之
    • Total Pages
      490
    • Publisher
      エヌ・ティー・エス
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Journal Article] 電子ビームを応用した医療向け積層造形品の材料強度評価2016

    • Author(s)
      久森紀之
    • Journal Title

      レーザー協会誌

      Volume: 41 Pages: 20-27

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Journal Article] 特集 3Dプリンタで注目されるAdditive Manufacturingの新潮流 レーザ・電子ビーム積層造形法によるカスタムメイドインプラントの作製2015

    • Author(s)
      久森紀之
    • Journal Title

      日本機械学会誌

      Volume: 118 Pages: 22-25

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Journal Article] 初学者のためのバイオマテリアル 3.セラミックスバイオマテリアル2014

    • Author(s)
      久森紀之
    • Journal Title

      材料

      Volume: 63 Pages: 563-568

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Journal Article] ,初学者のためのバイオマテリアル 1.バイオマテリアルの現状とその応用2014

    • Author(s)
      久森紀之
    • Journal Title

      材料

      Volume: 63 Pages: 417-429

    • NAID

      130004749899

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Journal Article] 医工連携におけるレーザの活用技術 レーザ・電子ビーム積層造形法によるカスタムメイドインプラントの現状と将来2014

    • Author(s)
      久森紀之
    • Journal Title

      レーザ協会誌

      Volume: 38 Pages: 26-34

    • Data Source
      KAKENHI-PROJECT-25420032
  • [Journal Article] ELID 研削を施した人工関節用 Co-Cr 合金のピンオンディスク法による腐食摩耗特性の評価2013

    • Author(s)
      久森紀之,松川達哉,水谷正義,大森整,西村直之,綱島義貴,藏本孝一,江面篤志
    • Journal Title

      砥粒加工学会誌

      Volume: 57 Pages: 235-240

    • NAID

      40019969626

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Journal Article] ELID研削を施した人工関節用Co-Cr合金のピンオンディスク法による腐食摩耗特性の評価2013

    • Author(s)
      久森紀之
    • Journal Title

      砥粒加工学会誌

      Volume: 57 Pages: 235-240

    • NAID

      40019969626

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Journal Article] ELID 研削を施した Co-Cr 合金の超高分子量ポリエチレンによる摩擦環境下における腐食特性評価2012

    • Author(s)
      水谷正義, 久森紀之, 水野隆文, 江面篤志,大内邦夫,大森整,藤原邦彦,土居憲司,藏本孝一
    • Journal Title

      砥粒加工学会誌

      Volume: 56 Pages: 2012-2012

    • NAID

      10030194767

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Journal Article] Effects of mechanicaistress on corrosion resistance of metallic biomaterials", The 11th World Conference on Titanium2007

    • Author(s)
      Noriyuki, HISAMORI・Jun, KOMOTORI・Akiko, NAKAJIMA
    • Journal Title

      Ti-2007

      Pages: 1553-1556

    • Data Source
      KAKENHI-PROJECT-17760092
  • [Journal Article] Development of Bone-like composites material and its properties2007

    • Author(s)
      Noriyuki, HISAMORI・Yukito, HAGIHARA
    • Journal Title

      Key Engineering 353-358

      Pages: 2219-2222

    • Data Source
      KAKENHI-PROJECT-17760092
  • [Journal Article] Ti-6Al-4V合金の腐食疲労における腐食と疲労の相乗効果-金属系バイオマテリアルの性能評価手法の開発-2006

    • Author(s)
      今吉翔一, 久森紀之, 萩原行人
    • Journal Title

      Proceedings of the 28^<th> symposium on fatigue

      Pages: 21-24

    • Data Source
      KAKENHI-PROJECT-17760092
  • [Journal Article] 生体活性能を施したチタン合金のき裂進展評価2005

    • Author(s)
      久森 紀之
    • Journal Title

      日本金属学会2005年春期大会講演概要集 (発表予定)

    • Data Source
      KAKENHI-PROJECT-14750074
  • [Journal Article] 荷重下におけるチタン合金へのアパタイトの析出能評価2004

    • Author(s)
      久森 紀之
    • Journal Title

      材料試験技術 49・3

      Pages: 171-176

    • NAID

      40006365137

    • Data Source
      KAKENHI-PROJECT-14750074
  • [Journal Article] アルカリ処理チタン合金のin vivo骨界面強度2004

    • Author(s)
      久森 紀之
    • Journal Title

      日本金属学会2004年春期大会講演概要集

      Pages: 117-117

    • Data Source
      KAKENHI-PROJECT-14750074
  • [Patent] α+β型チタン合金の熱処理方法、及びその方法を用いて製造されたα+β型チタン合金製品2015

    • Inventor(s)
      塚原真宏,深沢剣吾,三坂佳孝,久森紀之,桐山健太郎
    • Industrial Property Rights Holder
      塚原真宏,深沢剣吾,三坂佳孝,久森紀之,桐山健太郎
    • Industrial Property Rights Type
      特許
    • Filing Date
      2015-08-31
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 複合改質した電子ビーム積層Ti-6Al-4V合金の各種特性評価2022

    • Author(s)
      荒木悠哉,久森紀之,水野悠太,黒川敦貴,小林裕次,塚原真宏,三阪佳孝
    • Organizer
      日本材料学会第71期通常総会・学術講演会ならびに各種併設行事
    • Data Source
      KAKENHI-PROJECT-19K04096
  • [Presentation] ショットピーニングを施した医療用Co-Cr合金のバレル研磨面の特性評価2021

    • Author(s)
      長谷川 勇太,黒川 敦貴,小林 祐次,久森紀之
    • Organizer
      日本機械学会 2021年度年次大会
    • Data Source
      KAKENHI-PROJECT-19K04096
  • [Presentation] 電子ビーム積層造形法によるチタン合金の微細構造と疲労特性の関係から見える実用化への課題2021

    • Author(s)
      久森紀之
    • Organizer
      一般般社団法人溶接協会
    • Invited
    • Data Source
      KAKENHI-PROJECT-19K04096
  • [Presentation] 3D プリンターを活用した 生体・医療材料への応用と課題2021

    • Author(s)
      久森紀之
    • Organizer
      日本材料学会生体材料部門委員会
    • Invited
    • Data Source
      KAKENHI-PROJECT-19K04096
  • [Presentation] 電子ビーム積層造形したTi-6Al-4V合金の微細組織と疲労特性の関係2018

    • Author(s)
      久森紀之
    • Organizer
      軽金属学会関西支部シンポジウム
    • Invited
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 積層造形したチタン合金の耐食性の評価2018

    • Author(s)
      黒沼 あゆみ,久森 紀之
    • Organizer
      日本機械学会2018年次大会
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 表面改質による3D造形チタン合金の ねじり疲労特性向上の試み2018

    • Author(s)
      近藤弘理,久森紀之
    • Organizer
      日本材料学会
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 積層造形チタン合金の耐摩耗性と耐食性の評価2018

    • Author(s)
      黒沼 あゆみ,久森 紀之
    • Organizer
      日本材料学会第68期通常総会・学術講演会
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 積層造形したチタン合金の耐摩耗性と耐食性の評価2018

    • Author(s)
      黒沼 あゆみ,久森 紀之
    • Organizer
      日本航空宇宙学会第60回構造強度に関する講演会
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] ショットピーニングを施した 医療用Co-Cr合金の表面性状・組織2018

    • Author(s)
      福田元樹,久森 紀之,小林祐次
    • Organizer
      日本材料学会第68期通常総会・学術講演会
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 積層造形したチタン合金の微細組織と疲労特性の 関係2018

    • Author(s)
      久森紀之
    • Organizer
      日本機械学会2018年次大会
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 医療用 Co-Cr 合金の表面性状と組織に及ぼすシ ョットピーニングの効果2018

    • Author(s)
      福田元樹,久森 紀之 ,小林祐次
    • Organizer
      日本機械学会2018年次大会
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 電子ビーム積層造形したTi-6Al-4V合金の微細組織と疲労特性の関係2018

    • Author(s)
      久森紀之
    • Organizer
      日本金属学会
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 電子ビーム積層造形法により作製したCo-Cr-Mo合金の疲労特性に結晶構造が及ぼす影響2017

    • Author(s)
      鈴木 もえ,久森 紀之,小泉 雄一郎,千葉 晶彦
    • Organizer
      日本金属学会春期大会
    • Place of Presentation
      首都大学東京(東京都・八王子市)
    • Year and Date
      2017-03-23
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 電子ビーム積層造形Ti-6Al-4V合金のねじり疲労特性評価2017

    • Author(s)
      近藤弘理,久森紀之
    • Organizer
      日本金属学会
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 電子ビーム積層造形コバルトクロム合金の熱処理による疲労特性向上2017

    • Author(s)
      鈴木もえ,久森紀之,小泉雄一郎,千葉昌彦
    • Organizer
      日本金属学会
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 3D造形チタン合金の欠陥観察と評価2017

    • Author(s)
      近藤弘理,久森 紀之
    • Organizer
      日本金属学会春期大会
    • Place of Presentation
      首都大学東京(東京都・八王子市)
    • Year and Date
      2017-03-23
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 積層造形コバルトクロム合金の疲労特性に及ぼす熱処理の影響2016

    • Author(s)
      鈴木 もえ,久森 紀之,小泉 雄一郎,千葉 晶彦
    • Organizer
      日本金属学会秋期大会
    • Place of Presentation
      大阪大学豊中キャンパス(大阪府・吹田市)
    • Year and Date
      2016-09-21
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 3D積層造形した医療用インプラントデバイスの現状と展望2016

    • Author(s)
      久森 紀之
    • Organizer
      日本材料学会第29回信頼性シンポジウム
    • Place of Presentation
      東京理科大学森森戸記念会館(東京都・新宿区)
    • Year and Date
      2016-12-15
    • Invited
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 3D積層造形法による生体・医療材料の創製とその諸特性2016

    • Author(s)
      久森 紀之
    • Organizer
      日本材料学会疲労・回生体・医療材料シンポジウム
    • Place of Presentation
      赤穂ハイツ(兵庫県・赤穂市)
    • Year and Date
      2016-11-11
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 3D造形チタン合金の欠陥観察と評価2016

    • Author(s)
      近藤弘理,久森紀之
    • Organizer
      日本材料学会 第65期通常総会・学術講演会ならびに各種併設行事
    • Place of Presentation
      (富山県・富山大学)
    • Year and Date
      2016-05-27
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 3D造形コバルトクロム合金の疲労特性に及ぼす熱処理の影響2016

    • Author(s)
      鈴木 もえ,久森 紀之,小泉 雄一郎,千葉 晶彦
    • Organizer
      日本機械学会年次大会
    • Place of Presentation
      九州大学伊都キャンパス(福岡県・福岡市)
    • Year and Date
      2016-09-11
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 電子ビーム溶融法により造形したTi-6Al-4V合金のねじり疲労特性評価2016

    • Author(s)
      近藤弘理,久森 紀之
    • Organizer
      日本機械学会年次大会
    • Place of Presentation
      九州大学伊都キャンパス(福岡県・福岡市)
    • Year and Date
      2016-09-11
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 電子ビーム溶融法により造形したTi-6Al-4V合金の欠陥観察と評価2016

    • Author(s)
      近藤弘理,久森 紀之
    • Organizer
      日本金属学会秋期大会
    • Place of Presentation
      大阪大学豊中キャンパス(大阪府・吹田市)
    • Year and Date
      2016-09-21
    • Data Source
      KAKENHI-PROJECT-16K05986
  • [Presentation] 3D積層造形チタン合金の疲労特性と表面改質によるその特性改善の試み(北海道・北海道大学)2015

    • Author(s)
      久森紀之
    • Organizer
      日本機械学会 2015年度年次大会
    • Place of Presentation
      北海道・北海道大学
    • Year and Date
      2015-09-13
    • Invited
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 3Dをつかったモノづくり ~ 新商品開発、プロダクトデザイン、3D プリンタ ~2015

    • Author(s)
      久森 紀之
    • Organizer
      コラボ産学官第12回研究成果発表会
    • Place of Presentation
      タワーホール船堀
    • Year and Date
      2015-03-06
    • Invited
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 3D造形チタン合金の疲労特性と表面改質の影響2015

    • Author(s)
      久森紀之
    • Organizer
      (一社)日本機械学会 材料力学部門
    • Place of Presentation
      京都府・京都テルサ
    • Year and Date
      2015-10-13
    • Invited
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 3D造形チタン合金の疲労特性と表面改質によるその特性改善の試み2015

    • Author(s)
      久森 紀之
    • Organizer
      粉体粉末冶金協会
    • Place of Presentation
      大阪大学中之島センター
    • Year and Date
      2015-02-25
    • Invited
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 3D造形チタン合金の疲労特性と表面改質の影響2015

    • Author(s)
      久森紀之
    • Organizer
      日本材料学会 第64期通常総会・学術講演会ならびに各種併設行事
    • Place of Presentation
      山形県・山形大学
    • Year and Date
      2015-05-22
    • Invited
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 電子ビーム溶融法により作製したチタン合金の平面曲げ疲労特性評価2013

    • Author(s)
      桐山健太郎 久森紀之 竹島隼人 小茂鳥潤
    • Organizer
      日本材料学会 第62期通常総会・学術講演会ならびに各種併設行事
    • Place of Presentation
      東京工業大学
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 薄膜コーティングされた医療用金属材料の界面強度評価方法2013

    • Author(s)
      久森紀之
    • Organizer
      日本機械学会 2013年次大会
    • Place of Presentation
      岡山大学
    • Invited
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 電子ビーム積層造形法により作製したチタン合金の微細組織と引張疲労との相関性2013

    • Author(s)
      久森紀之
    • Organizer
      日本金属学会2013年春期大会
    • Place of Presentation
      東京理科大学
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Presentation] レーザ・電子ビーム積層造形法によるオーダーメイドインプラントの現状と将来2013

    • Author(s)
      久森紀之
    • Organizer
      レーザ協会
    • Place of Presentation
      上智大学
    • Invited
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] レーザ・電子ビーム積層造形法によるカスタムインプラントの作製2013

    • Author(s)
      久森紀之
    • Organizer
      先進ものづくり技術によるアナライザーキーコンポーネント開発基盤の構築状況
    • Place of Presentation
      理化学研究所
    • Invited
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 電子ビーム積層造形法により作製したチタン合金の微細組織と引張疲労との相関性2013

    • Author(s)
      久森紀之
    • Organizer
      日本金属学会 2013 年春期大会
    • Place of Presentation
      東京理科大学
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Presentation] 電子ビーム溶融法により作製したチタン合金に及ぼす表面改質の影響2013

    • Author(s)
      桐山健太郎 久森紀之 福田 英次 竹島隼人 小茂鳥潤
    • Organizer
      日本金属学会2013秋期大会
    • Place of Presentation
      金沢大学
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] レーザ・電子ビーム積層造形法によるオーダーメイドインプラントの作製2013

    • Author(s)
      久森紀之
    • Organizer
      日本材料学会 関東支部
    • Place of Presentation
      中央大学
    • Invited
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 電子ビームにより造形したチタン合金の平面曲げ疲労特性に及ぼす表面改質の影響2013

    • Author(s)
      桐山健太郎 久森紀之 福田 英次 竹島隼人 小茂鳥潤
    • Organizer
      日本材料学会
    • Place of Presentation
      阿蘇ファームランド
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 医療用チタン合金の力学的機能性評価2012

    • Author(s)
      久森紀之
    • Organizer
      チタノミックス研究会
    • Place of Presentation
      豊橋商工会議所(招待講演)
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Presentation] ELID 研削を施した人工関節用Co-Cr 合金の腐食摩耗特性の評価2012

    • Author(s)
      久森紀之
    • Organizer
      第95回人工関節の機能高度化研究会
    • Place of Presentation
      ナカシマメディカル(株)本社
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Presentation] 金属粉末積層法を用いて造形したチタン合金の疲労特性2012

    • Author(s)
      久森紀之
    • Organizer
      日本材料学会 第61 期通常総会・学術講演会
    • Place of Presentation
      岡山大学
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Presentation] 医療用チタン合金の力学的機能性評価2012

    • Author(s)
      久森紀之
    • Organizer
      チタノミックス研究会
    • Place of Presentation
      豊橋商工会議所
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Presentation] ELID研削を施した人工関節用Co-Cr合金の腐食摩耗特性の評価2012

    • Author(s)
      久森紀之
    • Organizer
      第95回 人工関節の機能高度化研究会
    • Place of Presentation
      ナカシマメディカル(株) 本社
    • Invited
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Presentation] 金属粉末積層法を用いて造形したチタン合金の疲労特性2012

    • Author(s)
      久森紀之
    • Organizer
      日本材料学会 第61期通常総会・学術講演会
    • Place of Presentation
      岡山大学
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Presentation] 電子ビーム溶融法により造形されたチタン合金の疲労特性評価2011

    • Author(s)
      武井将史 久森紀之
    • Organizer
      日本金属学会秋季大会
    • Place of Presentation
      沖縄コンベンションセンター
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Presentation] 医療用チタン合金の疲労特性に及ぼす表面改質とミクロ組織の影響2010

    • Author(s)
      久森紀之
    • Organizer
      日本材料学会 第30回疲労シンポジウム
    • Place of Presentation
      高知・高知城ホール
    • Year and Date
      2010-08-30
    • Data Source
      KAKENHI-PROJECT-22760084
  • [Presentation] 3D造形したチタン合金の平面曲げ疲労特性

    • Author(s)
      桐山健太郎,久森紀之,福田英次
    • Organizer
      日本金属学会2014秋期大会
    • Place of Presentation
      名古屋大学
    • Year and Date
      2014-09-24 – 2014-09-26
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 3D造形チタン合金の表面改質による平面曲げ疲労特性の向上

    • Author(s)
      桐山健太郎,久森紀之,福田英次,小茂鳥潤
    • Organizer
      日本金属学会 第156回 春期講演大会
    • Place of Presentation
      東京大学
    • Year and Date
      2015-03-18 – 2015-03-20
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 3D造形したチタン合金の平面曲げ疲労特性に及ぼす表面改質の影響

    • Author(s)
      桐山健太郎,久森紀之,福田英次,小茂鳥潤
    • Organizer
      日本機械学会 M&M2014カンファレンス
    • Place of Presentation
      福島大学
    • Year and Date
      2014-07-19 – 2014-07-21
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 3D造形チタン合金の表面改質による疲労特性の向上とそのメカニズム

    • Author(s)
      桐山健太郎,久森紀之,福田英次,小茂鳥潤
    • Organizer
      日本材料学会第32回疲労シンポジウム
    • Place of Presentation
      高山市民センター
    • Year and Date
      2014-11-06 – 2014-11-08
    • Data Source
      KAKENHI-PROJECT-25420032
  • [Presentation] 新たな評価手法基準の提案

    • Author(s)
      久森 紀之
    • Organizer
      日本溶射学会
    • Place of Presentation
      機械振興会館
    • Year and Date
      2014-06-03 – 2014-06-04
    • Invited
    • Data Source
      KAKENHI-PROJECT-25420032
  • 1.  KOMOTORI Jun (30225586)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 2.  TAKAI Kenichi (50317509)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 3.  野末 章 (80146802)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 4.  KATAHIRA Kazutoshi (70332252)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 5.  OOMORI Hitoshi (50233276)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi