katou hidemi 加藤秀実

… Alternative Names

KATO Hidemi 加藤秀実

Less

Researcher Number	80323096
Other IDs
External Links
Affiliation (Current)	2025: 東北大学, 金属材料研究所, 教授
Affiliation (based on the past Project Information) *help	2014 – 2024: 東北大学, 金属材料研究所, 教授 2008 – 2013: 東北大学, 金属材料研究所, 准教授 2007 – 2008: Tohoku University, 金属材料研究所, 助教 2006: 東北大学, 金属材料研究所, 助手 2005: 東北大, 金属材料研究所, 助手 2001 – 2004: 東北大学, 金属材料研究所, 助手
Review Section/Research Field	Principal Investigator Structural/Functional materials / Structural/Functional materials / Medium-sized Section 26:Materials engineering and related fields / Science and Engineering / Nanomaterials engineering / Physical properties of metals / Science and Engineering / Composite materials/Physical properties Except Principal Investigator Structural/Functional materials / Basic Section 26040:Structural materials and functional materials-related … More / Medium-sized Section 26:Materials engineering and related fields / Science and Engineering / Basic Section 26050:Material processing and microstructure control-related / Material processing/Microstructural control engineering / Quantum beam science / Material processing/treatments Less
Keywords	Principal Investigator 金属ガラス / デアロイング / ポーラス金属 / ガラス形成能 / 核生成理論 / バルク金属ガラス / ナノ結晶 / Phase structure / Strengthening mechanism / Age hardening … More / Heat treatment / Rear earth / 時効析出 / 結晶粒微細化 / 急速凝固 / マグネシウム合金 / 共連続構造 / 相分離 / 接合 / ハイエントロピー合金 / ハイエントロピー / 超高圧合成 / ヘテロ構造 / セラミックス / 耐食性 / ハイエントロピー材料 / インプリント成型 / 回折格子 / 位相イメージング / インプリント加工 / 創製プロセス / ナノ材料 / ナノ多孔体 / 負極材料 / 脱成分法 / 多孔質 / 多孔体 / 活物質 / リチウムイオン二次電池 / シリコン / 負極 / リチウム二次電池 / ポーラス材料 / ナノポーラス金属 / 構造緩和 / 破壊靭性 / フラジリティ / クリープ回復 / 金属物性 / 力学物性 / 内部摩擦 / ガラス遷移 / 緩和 / 相変態 / 準結晶 / 応力誘起軟化現象 / 摩擦発熱 / ストレスオーバーシュート / 粘弾性挙動 / 非ニュートン粘性流動 / ナノ結晶粒子 / ナノ準結晶 / 応力誘起構造変化 / 非線形粘性流動 / 複合材料 / 過冷却液体 / バルクガラス合金 … More Except Principal Investigator ハイエントロピー合金 / 脱合金化 / 金属ガラス / 金属溶湯脱成分 / 触媒 / ポーラス金属 / デアロイング / 溶融金属 / 軟磁性 / アモルファス合金 / ポーラス / アモルファス材料 / バルク金属ガラス / 機械的性質 / ニュースレター / 情報発信 / アーカイブ化 / 研究成果 / 脱合金 / 磁気抵抗効果 / スピントロニクス / 電磁機能 / スピン蓄積 / スピンホール効果 / スピン軌道トルク / 異常ネルンスト効果 / 異常ホール効果 / 異方性磁気抵抗効果 / 磁気異方性 / Spark plasma sintering / corrosion resistance / microstructure behaviour / cold spray / Metallic glass / ポロシティ / 粗大化 / 脱成分 / 金属液体 / 機械的特性 / 構造若返り / 非アフィン歪み / 緩和状態制御 / 組織制御 / 材料加工 / 機能材料 / 構造材料 / 講習会 / 大型共通設備 / 人材育成 / 若手研究会 / 国際活動 / 連携会議 / 全体会議 / 共同研究 / ナノ結晶合金 / マイクロ加工 / ナノ結晶材料 / 結晶・組織制御 / ナノポーラス金属 / 表面・界面 / 微細加工 / ナノ粒子 / 干渉計 / 小角Ｘ線散乱 / イメージング / Ｘ線 / 擬似体液 / 傾斜機能 / 水接触角 / 光触媒 / 表面改質 / イオン溶出 / アナターゼ / ニッケルチタン / 電子・電気材料 / 磁性 / 電子・電気材料粉末冶金 / 電子・電気材料粉末治金 / ナノ材料 / 社会基盤材料 / 金属物性 / 生距離秩序 / クラスター充填構造 / パーコレーション / 降伏現象 / 水焼入れ法 / 合金開発 / 中距離秩序 / 電子線回折 / パラジウム合金 / ジルコニウム合金 / 銅合金 / パターンドメディア / 分子動力学シミュレーション / 鉄基金属ガラス / 微小電気機械システム / 高エントロピー合金 / スパークプラズマ焼結法 / 連続鋳造 / 生体材料 / ナノ粒子金属ガラス / 不均質構造 / 塑性変形 / 核生成制御 / 構造緩和 / 微細構造変化 / 動的構造変化 / 塑性変形能 / 局所構造 / ガラス形成能 / 相変態 / 核生成 / 微細構造 Less

Establishment of Partial Liquid Metal Dealloying for New Nanoporous Alloy Synthesis by Thermodynamic Control of Solid-Liquid Phase Equilibrium
- Principal Investigator
  
  和田武
- Project Period (FY)
  2023 – 2025
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Tohoku University
ハイエントロピー合金新学術領域研究の連携的な運営と統括
- Principal Investigator
  
  乾晴行
- Project Period (FY)
  2023
- Research Category
  
  Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
- Review Section
  
  Science and Engineering
- Research Institution
  Kyoto University
Pioneering development of electromagnetic functions in high entropy alloys
- Principal Investigator
  
  高梨弘毅
- Project Period (FY)
  2021 – 2024
- Research Category
  
  Grant-in-Aid for Challenging Research (Pioneering)
- Review Section
  
  Medium-sized Section 26:Materials engineering and related fields
- Research Institution
  Japan Atomic Energy Agency
  Tohoku University
相分離する異種金属のデアロイング接合Principal Investigator
- Principal Investigator
  
  加藤秀実
- Project Period (FY)
  2021 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Review Section
  
  Medium-sized Section 26:Materials engineering and related fields
- Research Institution
  Tohoku University
Formation mechanism of porous metals by liquid metal dealloying
- Principal Investigator
  
  Wada Takeshi
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Tohoku University
Corrosion-wear mitigation: are metallic glass coating deposited by cold spray good candidates?
- Principal Investigator
  
  MARY Nicolas
- Project Period (FY)
  2019 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Tohoku University
Cooperative management of the innovative area research on high-entropy alloys
- Principal Investigator
  
  INUI HARUYUKI
- Project Period (FY)
  2018 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
- Review Section
  
  Science and Engineering
- Research Institution
  Kyoto University
Creation of new materials and functions based on high entropy effectPrincipal Investigator
- Principal Investigator
  
  Kato Hidemi
- Project Period (FY)
  2018 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
- Review Section
  
  Science and Engineering
- Research Institution
  Tohoku University
Control of relaxation state and improvement of ductility in metallic glasses induced by inhomogeneous local non-affine strain
- Principal Investigator
  
  Saida Junji
- Project Period (FY)
  2018 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Review Section
  
  Medium-sized Section 26:Materials engineering and related fields
- Research Institution
  Tohoku University
Ｍｇ－希土類結晶および非晶質合金の作製とその力学特性調査Principal Investigator
- Principal Investigator
  
  加藤秀実
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for JSPS Fellows
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tohoku University
Development of high-strength and high high-plastic deformable nanocrystalline/amorphous complex alloys by controlling thier nano-hetero structures
- Principal Investigator
  
  YAMASAKI Tohru
- Project Period (FY)
  2017 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  University of Hyogo
Effect of current flow on the kinetic of the liquid metal dealloying reaction and its application for nanoprous structural control
- Principal Investigator
  
  WADA Takeshi
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tohoku University
Development of super-high-sensitivity multimodal X-ray imaging
- Principal Investigator
  
  Yashiro Wataru
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Quantum beam science
- Research Institution
  Tohoku University
Development large-area and high aspect ratio metallic glass gratings for Talbot-Lau interferometerPrincipal Investigator
- Principal Investigator
  
  KATO Hidemi
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tohoku University
Development of open-cell type nanoporous silicon for long lifetime and high capacity lithium secondary battery electrodePrincipal Investigator
- Principal Investigator
  
  Hidemi Kato
- Project Period (FY)
  2013 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Nanomaterials engineering
- Research Institution
  Tohoku University
Formation of porous surface on NiTi and suppression of Ni ion release
- Principal Investigator
  
  UEDA Kyosuke
- Project Period (FY)
  2012 – 2013
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Material processing/treatments
- Research Institution
  Tohoku University
Synthesis of high strength Fe-based bulk hetero metallic glass by self-organization phenomena.
- Principal Investigator
  
  MAKINO Akihiro
- Project Period (FY)
  2011 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tohoku University
Preparation and application of nanoporous metals by using dealloying in a metallic meltPrincipal Investigator
- Principal Investigator
  
  KATO HIDEMI
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tohoku University
Intrinsic nanoscale inhomonegeity in metallic glass and its relation to mechanical propertiesPrincipal Investigator
- Principal Investigator
  
  KATO Hidemi
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Physical properties of metals
- Research Institution
  Tohoku University
Fabrication of Bulk Metallic Glasses in Centimeter Class and TheirIndustrialization
- Principal Investigator
  
  INOUE Akihisa
- Project Period (FY)
  2008 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (S)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Josai International University
  Tohoku University
Synthesis and dynamic nano structure change in metallic glasses with stable inhomogeneous local structure
- Principal Investigator
  
  SAIDA Junji
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tohoku University
金属ガラス形成能の低域雰囲気圧力依存性の解明と応用Principal Investigator
- Principal Investigator
  
  加藤秀実
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  Tohoku University
非ニュートン流動を利用した方位制御バルク状ナノ構造金属ガラス複合材料の創製と性質Principal Investigator
- Principal Investigator
  
  加藤秀実
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tohoku University
安定化過冷却液体を利用したバルク金属ガラス複合材料の創製と性質Principal Investigator
- Principal Investigator
  
  加藤秀実
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Composite materials/Physical properties
- Research Institution
  Tohoku University

[Book] 全固体電池のイオン伝導性向上技術と材料、製造プロセスの開発第7章1節 251貢－257貢2017
- Author(s)
  和田武、加藤秀実、市坪哲
- Total Pages
  475
- Publisher
  株式会社　技術情報協会
- Data Source
  KAKENHI-PROJECT-25246009
[Book] Surface improvement for biocompatibility of biomedical Ti alloy by dealloying in metallic melt in Advances in Metallic Biomaterials Technology, Ed. by M. Niinomi, T. Narushima and M. Nakai.2014
- Author(s)
  M. Hirohashi, K. Ueda, T. Wada, T.Narushima and H. Kato
- Publisher
  Spriger-Verlag GmbH, Heidelberg (出版確定)
- Data Source
  KAKENHI-PROJECT-24656430
[Journal Article] Synthesis of New Nanoporous Metals by Liquid Metal Dealloying2024
- Author(s)
  和田武、加藤秀実
- Journal Title
  
  PLASTOS
  
  Volume: 7 Issue: 74 Pages: 81-86
- DOI
  10.32277/plastos.7.74_81
- ISSN
  2433-8826
- Language
  Japanese
- Data Source
  KAKENHI-PROJECT-23K26398
[Journal Article] Connection between Mechanical Relaxation and Equilibration Kinetics in a High-Entropy Metallic Glass2024
- Author(s)
  Duan Y.J.、Nabahat M.、Tong Yu、Ortiz-Membrado L.、Jimenez-Pique E.、Zhao Kun、Wang Yun-Jiang、Yang Y.、Wada T.、Kato H.、Pelletier J.?M.、Qiao J.C.、Pineda E.
- Journal Title
  
  Physical Review Letters
  
  Volume: 132 Issue: 5
- DOI
  10.1103/physrevlett.132.056101
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-WRAPUP-23H05419
[Journal Article] Exceptional abrasive wear resistance of immiscible Mg-Fe80Cr20 composites with 3D interconnected structure developed by liquid metal dealloying2023
- Author(s)
  Hong Seung Yeon、Ha Soo Vin、Jung Chan Woo、Shin Ki Jeong、Lee Jae Hyuk、Seong Jihye、Choi Munsu、Park Sung Hyuk、Wada Takeshi、Kato Hidemi、Kim Hyoung Seop、Joo Soo-Hyun
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 968 Pages: 172019-172019
- DOI
  10.1016/j.jallcom.2023.172019
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611, KAKENHI-PROJECT-23K26398
[Journal Article] Partial liquid metal dealloying to synthesize nickel-containing porous and composite ferrous and high-entropy alloys2023
- Author(s)
  Wada Takeshi、Geslin Pierre-Antoine、Wei Daixu、Kato Hidemi
- Journal Title
  
  Communications Materials
  
  Volume: 4 Issue: 1 Pages: 43-43
- DOI
  10.1038/s43246-023-00374-3
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-WRAPUP-23H05419, KAKENHI-PROJECT-21H04611, KAKENHI-PROJECT-23K26398
[Journal Article] Role of Cu in corrosion resistance of CoCrCuFeNi medium-entropy alloys: Importance of compositional change and thickening of oxide films2023
- Author(s)
  Kato Masaru、Nishimoto Masashi、Muto Izumi、Sugawara Yu
- Journal Title
  
  Corrosion Science
  
  Volume: 213 Pages: 110982-110982
- DOI
  10.1016/j.corsci.2023.110982
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-18H05452
[Journal Article] Dissimilar Joining of Immiscible Fe-Mg using Solid Metal Dealloying2023
- Author(s)
  K. Kurabayashi, T. Wada, H. Kato
- Journal Title
  
  Scripta Materialia
  
  Volume: 230 Pages: 115404-115404
- DOI
  10.1016/j.scriptamat.2023.115404
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K05126, KAKENHI-PROJECT-21H04611, KAKENHI-PROJECT-23K26398
[Journal Article] Fe20Mo20Ni20Rh20Ru20 and Fe14Mo35Ni15Rh15Ru21 Ultrahigh-Mixing-Entropy Alloys with Single Hexagonal Close-Packed Structure2023
- Author(s)
 Takeuchi Akira、Wada Takeshi、Amiya Kenji、Kato Hidemi、Nagase Takeshi
- Journal Title
 
 MATERIALS TRANSACTIONS
 
 Volume: 64 Issue: 4 Pages: 841-848
- DOI
 10.2320/matertrans.MT-M2022213
- ISSN
 1345-9678, 1347-5320
- Year and Date
 2023-04-01
- Language
 English
- Peer Reviewed / Open Access
- Data Source
 KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PUBLICLY-21H00146, KAKENHI-PROJECT-23K23084, KAKENHI-WRAPUP-23H05419, KAKENHI-PROJECT-23K26398
[Journal Article] Ultrafine nanoporous intermetallic catalysts by high-temperature liquid metal dealloying for electrochemical hydrogen production2022
- Author(s)
  Song Ruirui、Han Jiuhui、Okugawa Masayuki、Belosludov Rodion、Wada Takeshi、Jiang Jing、Wei Daixiu、Kudo Akira、Tian Yuan、Chen Mingwei、Kato Hidemi
- Journal Title
  
  Nature Communications
  
  Volume: 13 Issue: 1 Pages: 5157-5157
- DOI
  10.1038/s41467-022-32768-1
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611, KAKENHI-PROJECT-21J12719, KAKENHI-PROJECT-20K05126, KAKENHI-PROJECT-21K03766, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Fundamentals and Applications of Metallic Glasses, Nano-crystalline Materials and High Entropy Alloys2022
- Author(s)
  KATO Hidemi
- Journal Title
  
  Journal of the Japan Society of Powder and Powder Metallurgy
  
  Volume: 69 Issue: 2 Pages: 57-57
- DOI
  10.2497/jjspm.69.57
- NAID
  130008160419
- ISSN
  0532-8799, 1880-9014
- Year and Date
  2022-02-15
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PLANNED-18H05452
[Journal Article] Intrinsic Correlation between the Fraction of Liquidlike Zones and the Relaxation in High-Entropy Metallic Glasses2022
- Author(s)
  Duan Y.J.、Zhang L.T.、Qiao J.C.、Wang Yun-Jiang、Yang Y.、Wada T.、Kato H.、Pelletier J.M.、Pineda E.、Crespo D.
- Journal Title
  
  Physical Review Letters
  
  Volume: 129 Issue: 17 Pages: 175501-175501
- DOI
  10.1103/physrevlett.129.175501
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Harnessing elastic anisotropy to achieve low-modulus refractory high-entropy alloys for biomedical applications2022
- Author(s)
  Schonecker Stephan、Li Xiaojie、Wei Daixiu、Nozaki Shogo、Kato Hidemi、Vitos Levente、Li Xiaoqing
- Journal Title
  
  Materials & Design
  
  Volume: 215 Pages: 110430-110430
- DOI
  10.1016/j.matdes.2022.110430
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-21K03766
[Journal Article] Analysis of the anelastic deformation of high-entropy Pd20Pt20Cu20Ni20P20 metallic glass under stress relaxation and recovery2022
- Author(s)
  Duan Y.J.、Zhang L.T.、Wada T.、Kato H.、Pineda E.、Crespo D.、Pelletier J.M.、Qiao J.C.
- Journal Title
  
  Journal of Materials Science & Technology
  
  Volume: 107 Pages: 82-91
- DOI
  10.1016/j.jmst.2021.07.052
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Solid solution induced back-stress in multi-principal element alloys: Experiment and modeling2022
- Author(s)
  Kim Yongju、Asghari-Rad Peyman、Lee Jungwan、Gu Gang Hee、Jang Minji、Bouaziz Olivier、Estrin Yuri、Kato Hidemi、Kim Hyoung Seop
- Journal Title
  
  Materials Science and Engineering: A
  
  Volume: 835 Pages: 142621-142621
- DOI
  10.1016/j.msea.2022.142621
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Journal Article] Metalloid substitution elevates simultaneously the strength and ductility of face-centered-cubic high-entropy alloys2022
- Author(s)
  Wei Daixiu、Wang Liqiang、Zhang Yongjie、Gong Wu、Tsuru Tomohito、Lobzenko Ivan、Jiang Jing、Harjo Stefanus、Kawasaki Takuro、Bae Jae Wung、Lu Wenjun、Lu Zhen、Hayasaka Yuichiro、Kiguchi Takanori、Okamoto Norihiko L.、Ichitsubo Tetsu、Kim Hyoung Seop、Furuhara Tadashi、Ma Evan、Kato Hidemi
- Journal Title
  
  Acta Materialia
  
  Volume: 225 Pages: 117571-117571
- DOI
  10.1016/j.actamat.2021.117571
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04993, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-20H02459, KAKENHI-PROJECT-21K20418, KAKENHI-PROJECT-21K03766, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05456, KAKENHI-PLANNED-18H05453
[Journal Article] Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys2022
- Author(s)
  Wei Daixiu、Gong Wu、Tsuru Tomohito、Lobzenko Ivan、Li Xiaoqing、Harjo Stefanus、Kawasaki Takuro、Do Hyeon-Seok、Bae Jae Wung、Wagner Christian、Laplanche Guillaume、Koizumi Yuichiro、Adachi Hiroki、Aoyagi Kenta、Chiba Akihiko、Lee Byeong-Joo、Kim Hyoung Seop、Kato Hidemi
- Journal Title
  
  International Journal of Plasticity
  
  Volume: 159 Pages: 103443-103443
- DOI
  10.1016/j.ijplas.2022.103443
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21K03766, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PLANNED-18H05455, KAKENHI-PROJECT-23K23030
[Journal Article] Nanoimprinting of magnetic FeCo-based metallic glass thin films2022
- Author(s)
  Liang Xiaoyu、Sharma Parmanand、Zhang Yan、Kato Hidemi
- Journal Title
  
  Journal of Magnetism and Magnetic Materials
  
  Volume: 542 Pages: 168455-168455
- DOI
  10.1016/j.jmmm.2021.168455
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Journal Article] Work hardening behavior of hot-rolled metastable Fe50Co25Ni10Al5Ti5Mo5 medium-entropy alloy: in situ neutron diffraction analysis2022
- Author(s)
  Kwon Hyeonseok、Harjo Stefanus、Kawasaki Takuro、Gong Wu、Jeong Sang Guk、Kim Eun Seong、Sathiyamoorthi Praveen、Kato Hidemi、Kim Hyoung Seop
- Journal Title
  
  Science and Technology of Advanced Materials
  
  Volume: 23 Issue: 1 Pages: 579-586
- DOI
  10.1080/14686996.2022.2122868
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PLANNED-18H05455
[Journal Article] Microstructure evolution and deformation mechanism of α+β dual-phase Ti-xNb-yTa-2Zr alloys with high performance2022
- Author(s)
  Zhang Ting、Wei Daixiu、Lu Eryi、Wang Wen、Wang Kuaishe、Li Xiaoqing、Zhang Lai-Chang、Kato Hidemi、Lu Weijie、Wang Liqiang
- Journal Title
  
  Journal of Materials Science & Technology
  
  Volume: 131 Pages: 68-81
- DOI
  10.1016/j.jmst.2022.04.052
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21K03766, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Inhomogeneous dealloying kinetics along grain boundaries during liquid metal dealloying2022
- Author(s)
  Joo S.-H.、Jeong Y.B.、Wada T.、Okulov I.V.、Kato H.
- Journal Title
  
  Journal of Materials Science & Technology
  
  Volume: 106 Pages: 41-48
- DOI
  10.1016/j.jmst.2021.07.023
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611, KAKENHI-PROJECT-20K05126, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Sluggish dynamics of homogeneous flow in high-entropy metallic glasses2022
- Author(s)
  Zhang L.T.、Wang Y.J.、Pineda E.、Kato H.、Yang Y.、Qiao J.C.
- Journal Title
  
  Scripta Materialia
  
  Volume: 214 Pages: 114673-114673
- DOI
  10.1016/j.scriptamat.2022.114673
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] 3D interconnected nanoporous FeCo soft magnetic materials synthesized by liquid metal dealloying2022
- Author(s)
  Joo S.-H.、Kato H.
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 908 Pages: 164688-164688
- DOI
  10.1016/j.jallcom.2022.164688
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Development of Porous Metals by Liquid Metal Dealloying2022
- Author(s)
  WADA Takeshi、KATO Hidemi
- Journal Title
  
  Journal of the Japan Society of Powder and Powder Metallurgy
  
  Volume: 69 Issue: 1 Pages: 27-33
- DOI
  10.2497/jjspm.69.27
- NAID
  130008141727
- ISSN
  0532-8799, 1880-9014
- Year and Date
  2022-01-15
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-20K05126, KAKENHI-PROJECT-21H04611
[Journal Article] Strengthening of high-entropy alloys via modulation of cryo-pre-straining-induced defects2022
- Author(s)
  Wei Daixiu、Gong Wu、Wang Liqiang、Tang Bowen、Kawasaki Takuro、Harjo Stefanus、Kato Hidemi
- Journal Title
  
  Journal of Materials Science and Technology
  
  Volume: 129 Pages: 251-260
- DOI
  10.1016/j.jmst.2022.04.055
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21K03766, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Mechanical behaviors of equiatomic and near-equiatomic face-centered-cubic phase high-entropy alloys probed using in situ neutron diffraction2022
- Author(s)
  Wei Daixiu、Gong Wu、Tsuru Tomohito、Kawasaki Takuro、Harjo Stefanus、Cai Biao、Liaw Peter K.、Kato Hidemi
- Journal Title
  
  International Journal of Plasticity
  
  Volume: 158 Pages: 103417-103417
- DOI
  10.1016/j.ijplas.2022.103417
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21K03766, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-23K23030, KAKENHI-PLANNED-18H05453
[Journal Article] Effect of physical aging and cyclic loading on power-law creep of high-entropy metallic glass2022
- Author(s)
  Zhang Langting、Duan Yajuan、Pineda Eloi、Kato Hidemi、Pelletier Jean-Marc、Qiao Jichao
- Journal Title
  
  Journal of Materials Science & Technology
  
  Volume: 115 Pages: 1-9
- DOI
  10.1016/j.jmst.2021.10.043
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Composition design, synthesis and hydrogen storage ability of multi-principal-component alloy TiVZrNbTa2022
- Author(s)
  Zadorozhnyy V.、Tomilin I.、Berdonosova E.、Gammer C.、Zadorozhnyy M.、Savvotin I.、Shchetinin I.、Zheleznyi M.、Novikov A.、Bazlov A.、Serov M.、Milovzorov G.、Korol A.、Kato H.、Eckert J.、Kaloshkin S.、Klyamkin S.
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 901 Pages: 163638-163638
- DOI
  10.1016/j.jallcom.2022.163638
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Role of Fe substitution for Co on thermal stability and glass-forming ability of soft magnetic Co-based Co-Fe-B-P-C metallic glasses2022
- Author(s)
  Ren Junpeng、Li Yanhui、Liang Xiaoyu、Kato Hidemi、Zhang Wei
- Journal Title
  
  Intermetallics
  
  Volume: 147 Pages: 107598-107598
- DOI
  10.1016/j.intermet.2022.107598
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Relationship between atomic structure and excellent glass forming ability in Pd42.5Ni7.5Cu30P20 metallic glass2022
- Author(s)
  Hosokawa Shinya、Berar Jean-Francois、Boudet Nathalie、Pilgrim Wolf-Christian、Pusztai Laszlo、Hiroi Satoshi、Kohara Shinji、Kato Hidemi、Fischer Henry E.、Zeidler Anita
- Journal Title
  
  Journal of Non-Crystalline Solids
  
  Volume: 596 Pages: 121868-121868
- DOI
  10.1016/j.jnoncrysol.2022.121868
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] High-entropy design and its influence on glass-forming ability in Zr-Cu-based metallic glass2022
- Author(s)
  Ohashi Y.、Wada T.、Kato H.
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 915 Pages: 165366-165366
- DOI
  10.1016/j.jallcom.2022.165366
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Regulation of strength and ductility of single-phase twinning-induced plasticity high-entropy alloys2022
- Author(s)
  Wei Daixiu、Gong Wu、Kawasaki Takuro、Harjo Stefanus、Kato Hidemi
- Journal Title
  
  Scripta Materialia
  
  Volume: 216 Pages: 114738-114738
- DOI
  10.1016/j.scriptamat.2022.114738
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21K03766, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] In situ observation of liquid metal dealloying and etching of porous FeCr by X-ray tomography and X-ray diffraction2021
- Author(s)
  Mokhtari Morgane、Le Bourlot Christophe、Adrien Jerome、Bonnin Anne、Ludwig Wolfgang、Geslin Pierre-Antoine、Wada Takeshi、Duchet-Rumeau Jannick、Kato Hidemi、Maire Eric
- Journal Title
  
  Materialia
  
  Volume: 18 Pages: 101125-101125
- DOI
  10.1016/j.mtla.2021.101125
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-21H04611
[Journal Article] Relaxation Behavior and Heterogeneous Structures of Metallic Glasses2021
- Author(s)
  TANIMURA Hiroshi、HAYASHI Tomoki、LUCKABAUER Martin、KAWAGUCHI Tomoya、WAKEDA Masato、KATO Hidemi、ICHITSUBO Tetsu
- Journal Title
  
  Journal of the Society of Materials Science, Japan
  
  Volume: 70 Issue: 5 Pages: 374-380
- DOI
  10.2472/jsms.70.374
- NAID
  130008040251
- ISSN
  0514-5163, 1880-7488
- Year and Date
  2021-05-15
- Language
  Japanese
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Journal Article] Unusual two-step dealloying mechanism of nanoporous TiVNbMoTa high-entropy alloy during liquid metal dealloying2021
- Author(s)
  Joo Soo-Hyun、Okulov I.V.、Kato H.
- Journal Title
  
  Journal of Materials Research and Technology
  
  Volume: 14 Pages: 2945-2953
- DOI
  10.1016/j.jmrt.2021.08.100
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-21H04611
[Journal Article] Temperature- and strain-dependent thermally-activated deformation mechanism of a ferrous medium-entropy alloy2021
- Author(s)
  Lee Jungwan、Moon Jongun、Bae Jae Wung、Park Jeong Min、Kwon Hyeonseok、Kato Hidemi、Kim Hyoung Seop
- Journal Title
  
  Intermetallics
  
  Volume: 134 Pages: 107202-107202
- DOI
  10.1016/j.intermet.2021.107202
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Inelastic deformation of metallic glasses under dynamic cyclic loading2021
- Author(s)
  Duan Y.J.、Qiao J.C.、Wada T.、Kato H.、Wang Y.J.、Pineda E.、Crespo D.
- Journal Title
  
  Scripta Materialia
  
  Volume: 194 Pages: 113675-113675
- DOI
  10.1016/j.scriptamat.2020.113675
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Decoupling between calorimetric and dynamical glass transitions in high-entropy metallic glasses2021
- Author(s)
  Jiang Jing、Lu Zhen、Shen Jie、Wada Takeshi、Kato Hidemi、Chen Mingwei
- Journal Title
  
  Nature Communications
  
  Volume: 12 Issue: 1 Pages: 1-10
- DOI
  10.1038/s41467-021-24093-w
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K15180, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] 2.3 GPa cryogenic strength through thermal-induced and deformation-induced body-centered cubic martensite in a novel ferrous medium entropy alloy2021
- Author(s)
  Kwon Hyeonseok、Sathiyamoorthi Praveen、Karthik Gangaraju Manogna、Asghari-Rad Peyman、Zargaran Alireza、Do Hyeon-Seok、Lee Byeong-Joo、Kato Hidemi、Kim Hyoung Seop
- Journal Title
  
  Scripta Materialia
  
  Volume: 204 Pages: 114157-114157
- DOI
  10.1016/j.scriptamat.2021.114157
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Superior phase transformation-assisted mechanical properties of a metastable medium-entropy ferrous alloy with heterogeneous microstructure2021
- Author(s)
  Haftlang Farahnaz、Asghari-Rad Peyman、Moon Jongun、Lee Sunghak、Kato Hidemi、Kim Hyoung Seop
- Journal Title
  
  Materials Letters
  
  Volume: 302 Pages: 130391-130391
- DOI
  10.1016/j.matlet.2021.130391
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Evolution of 3D interconnected composites of high-entropy TiVNbMoTa alloys and Mg during liquid metal dealloying2021
- Author(s)
  Joo Soo-Hyun、Kato Hidemi、Okulov Ilya Vladimirovich
- Journal Title
  
  Composites Part B: Engineering
  
  Volume: 222 Pages: 109044-109044
- DOI
  10.1016/j.compositesb.2021.109044
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-21H04611
[Journal Article] Dynamic mechanical relaxation behavior of Zr35Hf17.5Ti5.5Al12.5Co7.5Ni12Cu10 high entropy bulk metallic glass2021
- Author(s)
  Zhang L.T.、Duan Y.J.、Wada T.、Kato H.、Pelletier J.M.、Crespo D.、Pineda E.、Qiao J.C.
- Journal Title
  
  Journal of Materials Science & Technology
  
  Volume: 83 Pages: 248-255
- DOI
  10.1016/j.jmst.2020.11.074
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Novel Co-Cu-Based Immiscible Medium-Entropy Alloys with Promising Mechanical Properties2021
- Author(s)
  Son Sujung、Moon Jongun、Kwon Hyeonseok、Asghari Rad Peyman、Kato Hidemi、Kim Hyoung Seop
- Journal Title
  
  Metals
  
  Volume: 11 Issue: 2 Pages: 238-238
- DOI
  10.3390/met11020238
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Effect of the synthesis conditions of Ce0.9Gd0.1O1.95 powder on its morphology and characteristics of the oxygen ion-conducting ceramics obtained by spark plasma sintering2021
- Author(s)
  Maslennikov D.V.、Matvienko A.A.、Sidelnikov A.A.、Dudina D.V.、Esikov M.A.、Belosludov R.V.、Kato H.
- Journal Title
  
  Ceramics International
  
  Volume: 47 Issue: 2 Pages: 2557-2564
- DOI
  10.1016/j.ceramint.2020.09.101
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Beyond strength-ductility trade-off: 3D interconnected heterostructured composites by liquid metal dealloying2021
- Author(s)
  Jeong Yeon Beom、Wada Takeshi、Joo Soo-Hyun、Park Jeong-Min、Moon Jongun、Kim Hyoung Seop、Okulov Ilya Vladimirovich、Park Sung Hyuk、Lee Jeong Hun、Kim Ki Buem、Kato Hidemi
- Journal Title
  
  Composites Part B: Engineering
  
  Volume: 225 Pages: 109266-109266
- DOI
  10.1016/j.compositesb.2021.109266
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-20J14001, KAKENHI-PROJECT-20K05126, KAKENHI-PROJECT-21H04611
[Journal Article] Stress relaxation in high-entropy Pd20Pt20Cu20Ni20P20 metallic glass: Experiments, modeling and theory2021
- Author(s)
  Duan Y.J.、Qiao J.C.、Wada T.、Kato H.、Pineda E.、Crespo D.、Wang Yun-Jiang
- Journal Title
  
  Mechanics of Materials
  
  Volume: 160 Pages: 103959-103959
- DOI
  10.1016/j.mechmat.2021.103959
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] New Ti/β-Ti alloy laminated composite processed by powder metallurgy: Microstructural evolution and mechanical property2021
- Author(s)
  Zhang Weidong、Yang Peng、Cao Yuankui、Li Xi、Wei Daixiu、Kato Hidemi、Wu Zhenggang
- Journal Title
  
  Materials Science and Engineering: A
  
  Volume: 822 Pages: 141702-141702
- DOI
  10.1016/j.msea.2021.141702
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PROJECT-21K03766
[Journal Article] Experimental and molecular dynamics studies of phase transformations during cryogenic thermal cycling in complex TiNi-based crystalline/amorphous alloys2021
- Author(s)
  Jiang J.、Ko W.-S.、Joo S.-H.、Wei D.X.、Wada T.、Kato H.、Louzguine-Luzgin D.V.
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 854 Pages: 155379-155379
- DOI
  10.1016/j.jallcom.2020.155379
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K14838, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Microstructure and corrosion study of Fe-based bulk metallic glass obtained by spark plasma sintering2021
- Author(s)
  Zarazaa-Villalobos L.、Mary N.、Soo-Hyun J.、Ogawa K.、Kato H.、Ichikawa Y.
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 880 Pages: 160399-160399
- DOI
  10.1016/j.jallcom.2021.160399
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Journal Article] Anomalous compliance of interpenetrating-phase composite of Ti and Mg synthesized by liquid metal dealloying2021
- Author(s)
  Okulov Ilya Vladimirovich、Wilmers Jana、Joo Soo-Hyun、Bargmann Swantje、Kim Hyoung Seop、Kato Hidemi
- Journal Title
  
  Scripta Materialia
  
  Volume: 194 Pages: 113660-113660
- DOI
  10.1016/j.scriptamat.2020.113660
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Detailed structural analysis of amorphous Pd40Cu40P20: Comparison with the metallic glass Pd40Ni40P20 from the viewpoint of glass forming ability2021
- Author(s)
  Hosokawa Shinya、Berar Jean-Francois、Boudet Nathalie、Pilgrim Wolf-Christian、Pusztai Laszlo、Hiroi Satoshi、Kohara Shinji、Kato Hidemi、Fischer Henry E.、Zeidler Anita
- Journal Title
  
  Journal of Non-Crystalline Solids
  
  Volume: 555 Pages: 120536-120536
- DOI
  10.1016/j.jnoncrysol.2020.120536
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Electrochemically synthesized liquid-sulfur/sulfide composite materials for high-rate magnesium battery cathodes2021
- Author(s)
  Shimokawa Kohei、Furuhashi Takuya、Kawaguchi Tomoya、Park Won-Young、Wada Takeshi、Matsumoto Hajime、Kato Hidemi、Ichitsubo Tetsu
- Journal Title
  
  Journal of Materials Chemistry A
  
  Volume: 9 Issue: 30 Pages: 16585-16593
- DOI
  10.1039/d1ta03464b
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Journal Article] Identifying the high entropy characteristic in La-based metallic glasses2021
- Author(s)
  Zhang Langting、Duan Yajuan、Crespo Daniel、Pineda Eloi、Wada Takeshi、Kato Hidemi、Pelletier Jean-Marc、Qiao Jichao
- Journal Title
  
  Applied Physics Letters
  
  Volume: 119 Issue: 5 Pages: 051905-051905
- DOI
  10.1063/5.0059822
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] A strategy for enhancing the mechanical property of the precipitation-strengthened medium-entropy alloy2021
- Author(s)
  Yi Hai-Long、Wei Daixiu、Xie Ren-Yi、Zhang Yi-Fan、Kato Hidemi
- Journal Title
  
  Materials Science and Engineering: A
  
  Volume: 819 Pages: 141390-141390
- DOI
  10.1016/j.msea.2021.141390
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-21K03766
[Journal Article] Hierarchical heterostructured FeCr-(Mg-Mg2Ni) composite with 3D interconnected and lamellar structures synthesized by liquid metal dealloying2021
- Author(s)
  Jeong Yeon Beom、Wada Takeshi、Joo Soo-Hyun、Park Jeong-Min、Kim Hyoung Seop、Okulov Ilya Vladimirovich、Kim Ki Buem、Kato Hidemi
- Journal Title
  
  Journal of Materials Research and Technology
  
  Volume: 15 Pages: 4573-4579
- DOI
  10.1016/j.jmrt.2021.10.080
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-20J14001, KAKENHI-PROJECT-20K05126, KAKENHI-PROJECT-21H04611
[Journal Article] Microstructures and mechanical properties of TiC-particulate-reinforced Ti-Mo-Al intermetallic matrix composites2020
- Author(s)
  Lu Y.、Watanabe M.、Miyata R.、Nakamura J.、Yamada J.、Kato H.、Yoshimi K.
- Journal Title
  
  Materials Science and Engineering: A
  
  Volume: 790 Pages: 139523-139523
- DOI
  10.1016/j.msea.2020.139523
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Nanoporous High-Entropy Alloy by Liquid Metal Dealloying2020
- Author(s)
  Okulov Artem Vladimirovich、Joo Soo-Hyun、Kim Hyoung Seop、Kato Hidemi、Okulov Ilya Vladimirovich
- Journal Title
  
  Metals
  
  Volume: 10 Issue: 10 Pages: 1396-1396
- DOI
  10.3390/met10101396
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] The atomic structure of a bulk metallic glass resolved by scanning tunneling microscopy and ab-initio molecular dynamics simulation2020
- Author(s)
  Belosludov R.V.、Oreshkin A.I.、Oreshkin S.I.、Muzychenko D.A.、Kato H.、Louzguine-Luzgin D.V.
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 816 Pages: 152680-152680
- DOI
  10.1016/j.jallcom.2019.152680
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Characterization of nanoscale detonation carbon produced in a pulse gas-detonation device2020
- Author(s)
  Shtertser A.A.、Rybin D.K.、Ulianitsky V.Yu.、Park W.、Datekyu M.、Wada T.、Kato H.
- Journal Title
  
  Diamond and Related Materials
  
  Volume: 101 Pages: 107553-107553
- DOI
  10.1016/j.diamond.2019.107553
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Ordering kinetics of nanoporous FeCo during liquid metal dealloying and the development of nanofacets2020
- Author(s)
  Joo Soo-Hyun、Yubuta Kunio、Kato Hidemi
- Journal Title
  
  Scripta Materialia
  
  Volume: 177 Pages: 38-43
- DOI
  10.1016/j.scriptamat.2019.10.007
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Novel hierarchical nanoporous graphene nanoplatelets with excellent rate capabilities produced via self-templating liquid metal dealloying2020
- Author(s)
  W.-Y. Park, T. Wada, S.-H. Joo, H. Han, H. Kato
- Journal Title
  
  Materials Today Communications
  
  Volume: 24 Pages: 101120-101120
- DOI
  10.1016/j.mtcomm.2020.101120
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K05126, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Effect of alloying elements on the microstructure and corrosion behavior of TiZr-based bulk metallic glasses2020
- Author(s)
  Liens Alethea、Ter-Ovanessian Benoit、Courtois Nicolas、Fabregue Damien、Wada Takeshi、Kato Hidemi、Chevalier Jerome
- Journal Title
  
  Corrosion Science
  
  Volume: 177 Pages: 108854-108854
- DOI
  10.1016/j.corsci.2020.108854
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Effect of dealloying rate on transformation behavior during liquid metal dealloying2020
- Author(s)
  Joo Soo-Hyun、Kato Hidemi
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 831 Pages: 154733-154733
- DOI
  10.1016/j.jallcom.2020.154733
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Transformation mechanisms and governing orientation relationships through selective dissolution of Ni via liquid metal dealloying from (FeCo)xNi100-x precursors2020
- Author(s)
  Joo Soo-Hyun、Kato Hidemi
- Journal Title
  
  Materials & Design
  
  Volume: 185 Pages: 108271-108271
- DOI
  10.1016/j.matdes.2019.108271
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Improving glass forming ability of off-eutectic metallic glass formers by manipulating primary crystallization reactions2020
- Author(s)
  Zeng Y.Q.、Yu J.S.、Tian Y.、Hirata A.、Fujita T.、Zhang X.H.、Nishiyama N.、Kato H.、Jiang J.Q.、Inoue A.、Chen M.W.
- Journal Title
  
  Acta Materialia
  
  Volume: 200 Pages: 710-719
- DOI
  10.1016/j.actamat.2020.09.042
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Mg-Based Metallic Glass-Polymer Composites: Investigation of Structure, Thermal Properties, and Biocompatibility2020
- Author(s)
  Sharma Adit、Kopylov Alexey、Zadorozhnyy Mikhail、Stepashkin Andrei、Kudelkina Vera、Wang Jun-Qiang、Ketov Sergey、Churyukanova Margarita、Louzguine-Luzgin Dmitri、Sarac Baran、Eckert Jurgen、Kaloshkin Sergey、Zadorozhnyy Vladislav、Kato Hidemi
- Journal Title
  
  Metals
  
  Volume: 10 Issue: 7 Pages: 867-867
- DOI
  10.3390/met10070867
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Selective deposition of platinum hemispheres on the {100} facets of synthetic diamond2020
- Author(s)
  Bokhonov Boris B.、Dudina Dina V.、Kato Hidemi、Wada Takeshi
- Journal Title
  
  Diamond and Related Materials
  
  Volume: 101 Pages: 107620-107620
- DOI
  10.1016/j.diamond.2019.107620
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Mechanical properties and microstructural change in (Cu?Fe) immiscible metal matrix composite: Effect of Mg on secondary phase separation2020
- Author(s)
  Jeong Yeon Beom、Jo Hee Ra、Park Hae Jin、Kato Hidemi、Kim Ki Buem
- Journal Title
  
  Journal of Materials Research and Technology
  
  Volume: 9 Issue: 6 Pages: 15989-15995
- DOI
  10.1016/j.jmrt.2020.11.049
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20J14001, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Fabrication of multi-blade crystals for hard-X-ray multi-beam imaging system2020
- Author(s)
  Yashiro Wataru、Liang Xiaoyu、Voegeli Wolfgang、Wada Takeshi、Kato Hidemi、Kajiwara Kentaro
- Journal Title
  
  Japanese Journal of Applied Physics
  
  Volume: 59 Issue: 9 Pages: 092001-092001
- DOI
  10.35848/1347-4065/abaac5
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Preparation of catalytically active Au nanoparticles by sputter deposition and their encapsulation in metal-organic framework of Cu3(BTC)22020
- Author(s)
  Matsuyama Kiyoshi、Tsubaki Tomohiro、Kato Takafumi、Okuyama Tetsuya、Muto Hiroyuki
- Journal Title
  
  Materials Letters
  
  Volume: 261 Pages: 127124-127124
- DOI
  10.1016/j.matlet.2019.127124
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PROJECT-18H01706, KAKENHI-PLANNED-18H05452
[Journal Article] Hot Deformation and Dynamic Recrystallization Behavior of CoCrNi and (CoCrNi)94Ti3Al3 Medium Entropy Alloys2020
- Author(s)
  Yi Hai-long、Wei Daixiu、Wang Yingchen、Wang Liqiang、Fang Ming-yang、Yang Kang、Kato Hidemi
- Journal Title
  
  Metals
  
  Volume: 10 Issue: 10 Pages: 1341-1341
- DOI
  10.3390/met10101341
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K14838, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Surface Functionalization of Biomedical Ti-6Al-7Nb Alloy by Liquid Metal Dealloying2020
- Author(s)
  Okulov Ilya Vladimirovich、Joo Soo-Hyun、Okulov Artem Vladimirovich、Volegov Alexey Sergeevich、Luthringer Berengere、Willumeit-Romer Regine、Zhang Laichang、Madler Lutz、Eckert Jurgen、Kato Hidemi
- Journal Title
  
  Nanomaterials
  
  Volume: 10 Issue: 8 Pages: 1479-1479
- DOI
  10.3390/nano10081479
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Mechanical Properties of FeCr‐Based Composite Materials Elaborated by Liquid Metal Dealloying towards Bioapplication2020
- Author(s)
  M. Mokhtari, C. Le Bourlot, J. Duchet-Rumeau, E. Godet, P.-A. Geslin, S. Dancette, T. Wada, H. Kato, E. Maire
- Journal Title
  
  Advanced Engineering Materials
  
  Volume: 22 Issue: 12 Pages: 2000381-2000381
- DOI
  10.1002/adem.202000381
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K05126, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] High-temperature mechanical behavior of B2-ordered Ti-Mo-Al alloys2020
- Author(s)
  Lu Y.、Yamada J.、Miyata R.、Kato H.、Yoshimi K.
- Journal Title
  
  Intermetallics
  
  Volume: 117 Pages: 106675-106675
- DOI
  10.1016/j.intermet.2019.106675
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Temperature and strain-rate dependence of flow stress of nanocrystalline nickel fabricated by electrolytic deposition2020
- Author(s)
  Yoji Miyajima1, Ryu Ichikawa, Hiroki Adachi, Tohru Yamasaki, Toshiyuki Fujii, and Masaharu Kato
- Journal Title
  
  Philosophical Magazine Letters
  
  Volume: 100 Issue: 12 Pages: 571-580
- DOI
  10.1080/09500839.2020.1823023
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17H01334
[Journal Article] Corrosion resistance of porous ferritic stainless steel produced by liquid metal dealloying of Incoloy 8002020
- Author(s)
  M. Mokhtari, T. Wada, C. Le Bourlot, J. Duchet-Rumeau, H. Kato, E. Maire, N. Mary
- Journal Title
  
  Corrosion Science
  
  Volume: 166 Pages: 108468-108468
- DOI
  10.1016/j.corsci.2020.108468
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K05126, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Nano-imprinting potential of magnetic FeCo-based metallic glass2019
- Author(s)
  Xiaoyu Liang、Sharma Parmanand、Zhang Yan、Makino Akihiro、Kato Hidemi
- Journal Title
  
  Nanotechnology
  
  Volume: 30 Issue: 30 Pages: 305302-305302
- DOI
  10.1088/1361-6528/ab115e
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-17H06154
[Journal Article] Beating Thermal Coarsening in Nanoporous Materials via High‐Entropy Design2019
- Author(s)
  Joo Soo‐Hyun、Bae Jae Wung、Park Won‐Young、Shimada Yusuke、Wada Takeshi、Kim Hyoung Seop、Takeuchi Akira、Konno Toyohiko J.、Kato Hidemi、Okulov Ilya V.
- Journal Title
  
  Advanced Materials
  
  Volume: 32 Issue: 6 Pages: 1906160-1906160
- DOI
  10.1002/adma.201906160
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K05323, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-17H03375
[Journal Article] Formation of Metallic Glass Coatings by Detonation Spraying of a Fe66Cr10Nb5B19 Powder2019
- Author(s)
  Kuchumova Ivanna D.、Batraev Igor S.、Ulianitsky Vladimir Yu.、Shtertser Alexandr A.、Gerasimov Konstantin B.、Ukhina Arina V.、Bulina Natalia V.、Bataev Ivan A.、Koga Guilherme Yuuki、Guo Yaofeng、Botta Walter Jose、Kato Hidemi、Wada Takeshi、Bokhonov Boris B.、Dudina Dina V.、Moreira Jorge Alberto
- Journal Title
  
  Metals
  
  Volume: 9 Issue: 8 Pages: 846-846
- DOI
  10.3390/met9080846
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Journal Article] Novel α + β Type Ti-Fe-Cu Alloys Containing Sn with Pertinent Mechanical Properties2019
- Author(s)
  Zadorozhnyy Vladislav、Ketov Sergey V.、Wada Takeshi、Wurster Stefan、Nayak Vignesh、Louzguine-Luzgin Dmitri V.、Eckert Jurgen、Kato Hidemi
- Journal Title
  
  Metals
  
  Volume: 10 Issue: 1 Pages: 34-34
- DOI
  10.3390/met10010034
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Structural heterogeneities and mechanical behavior of amorphous alloys2019
- Author(s)
  Qiao J.C.、Wang Q.、Pelletier J.M.、Kato H.、Casalini R.、Crespo D.、Pineda E.、Yao Y.、Yang Y.
- Journal Title
  
  Progress in Materials Science
  
  Volume: 104 Pages: 250-329
- DOI
  10.1016/j.pmatsci.2019.04.005
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Structural heterogeneities and mechanical behavior of amorphous alloys2019
- Author(s)
  J.C. Qiao, Q.Wang, J. M. Pelletier, H. Kato, R. Casalini, D. Crespo, E. Pineda, Y. Yao, Y. Yang,
- Journal Title
  
  Progress in Materials Science
  
  Volume: 104 Pages: 2150227-2150227
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Journal Article] Decreasing activation energy of fast relaxation processes in a metallic glass during aging2019
- Author(s)
  M. Luckabauer, T. Hayashi, H. Kato, T. Ichitsubo
- Journal Title
  
  Physical Review B
  
  Volume: 99 Pages: 140202-140202
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Journal Article] Phase-field investigation of the coarsening of porous structures by surface diffusion2019
- Author(s)
  Geslin Pierre-Antoine、Buchet Mickael、Wada Takeshi、Kato Hidemi
- Journal Title
  
  Physical Review Materials
  
  Volume: 3 Issue: 8 Pages: 083401-083401
- DOI
  10.1103/physrevmaterials.3.083401
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Septenary Zr-Hf-Ti-Al-Co-Ni-Cu high-entropy bulk metallic glasses with centimeter-scale glass-forming ability2019
- Author(s)
  T. Wada, J. Jiang, K. Yubuta, H. Kato, A. Takeuchi,
- Journal Title
  
  Materialia
  
  Volume: 7 Pages: 10372-10372
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Journal Article] Structure and mechanical properties of Ti-Based alloys containing Ag subjected to a thermomechanical treatment2019
- Author(s)
  Zadorozhnyy Vladislav、Kopylov Alexey、Gorshenkov Mikhail、Shabanova Elena、Zadorozhnyy Mikhail、Novikov Alexander、Maksimkin Aleksey、Wada Takeshi、Louzguine-Luzgin Dmitri V.、Kato Hidemi
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 781 Pages: 1182-1188
- DOI
  10.1016/j.jallcom.2018.12.152
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Interaction of a Ti-Cu Alloy with Carbon: Synthesis of Composites and Model Experiments2019
- Author(s)
  Dudina Dina V.、Vidyuk Tomila M.、Korchagin Michail A.、Gavrilov Alexander I.、Bulina Natalia V.、Esikov Maksim A.、Datekyu Masanari、Kato Hidemi
- Journal Title
  
  Materials
  
  Volume: 12 Issue: 9 Pages: 1482-1482
- DOI
  10.3390/ma12091482
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Introducing dislocations locally in Al-supersaturated α2-Ti3Al single crystal via nanoscale wedge indentation2019
- Author(s)
  Wei Daixiu、Koizumi Yuichiro、Nagasako Makoto、Kubota Yusuke、Aoyagi Tomoyuki、Nakagawa Yuki、Yoshino Masahiko、Chiba Akihiko、Kato Hidemi
- Journal Title
  
  Intermetallics
  
  Volume: 113 Pages: 106557-106557
- DOI
  10.1016/j.intermet.2019.106557
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Development of strong and ductile metastable face-centered cubic single-phase high-entropy alloys2019
- Author(s)
  Daixiu Wei, Xiaoqing Li, Stephan Schonecker, Jing Jiang, Won-Mi Choi, Byeong-Joo Lee, Hyoung Seop Kim, Akihiko Chiba, Hidemi Kato
- Journal Title
  
  Acta Materialia
  
  Volume: 181 Pages: 318-330
- DOI
  10.1016/j.actamat.2019.09.050
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K14838, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PLANNED-18H05455
[Journal Article] Antibacterial and antifungal properties of Ag nanoparticle-loaded cellulose nanofiber aerogels prepared by supercritical CO2 drying2019
- Author(s)
  Matsuyama Kiyoshi、Morotomi Kanae、Inoue Sakura、Nakashima Megumi、Nakashima Hiroyuki、Okuyama Tetsuya、Kato Takafumi、Muto Hiroyuki、Sugiyama Hiroyuki
- Journal Title
  
  The Journal of Supercritical Fluids
  
  Volume: 143 Pages: 1-7
- DOI
  10.1016/j.supflu.2018.08.008
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-16K06850
[Journal Article] Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys2019
- Author(s)
  Daixiu Wei, Xiaoqing Li, Jing Jiang, Weicheng Heng, Yuichiro Koizumi, Won-Mi Choi, Byeong-Joo Lee, Hyoung Seop Kim, Hidemi Kato, Akihiko Chiba
- Journal Title
  
  Scripta Materialia
  
  Volume: 165 Pages: 39-43
- DOI
  10.1016/j.scriptamat.2019.02.018
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K14838, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PLANNED-18H05455
[Journal Article] Anomalously low modulus of the interpenetrating-phase composite of Fe and Mg obtained by liquid metal dealloying2019
- Author(s)
  Okulov I.V.、Geslin P.-A.、Soldatov I.V.、Ovri H.、Joo S.-H.、Kato H.
- Journal Title
  
  Scripta Materialia
  
  Volume: 163 Pages: 133-136
- DOI
  10.1016/j.scriptamat.2019.01.017
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] High-Entropy Alloys with Hexagonal Close-Packed Structure in Ir26Mo20Rh22.5Ru20W11.5 and Ir25.5Mo20Rh20Ru25W9.5 Alloys Designed by Sandwich Strategy for the Valence Electron Concentration of Constituent Elements in the Periodic Chart2019
- Author(s)
 Takeuchi Akira、Wada Takeshi、Kato Hidemi
- Journal Title
 
 MATERIALS TRANSACTIONS
 
 Volume: 60 Issue: 8 Pages: 1666-1673
- DOI
 10.2320/matertrans.M2019037
- NAID
 130007683578
- ISSN
 1345-9678, 1347-5320
- Year and Date
 2019-08-01
- Language
 English
- Peer Reviewed / Open Access
- Data Source
 KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-17H03375
[Journal Article] Decreasing activation energy of fast relaxation processes in a metallic glass during aging2019
- Author(s)
  Luckabauer Martin、Hayashi Tomoki、Kato Hidemi、Ichitsubo Tetsu
- Journal Title
  
  Physical Review B
  
  Volume: 99 Issue: 14 Pages: 1-2
- DOI
  10.1103/physrevb.99.140202
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Development of porous FeCo by liquid metal dealloying: Evolution of porous morphology and effect of interaction between ligaments and melt2019
- Author(s)
  Joo Soo-Hyun、Wada Takeshi、Kato Hidemi
- Journal Title
  
  Materials & Design
  
  Volume: 180 Pages: 107908-107908
- DOI
  10.1016/j.matdes.2019.107908
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Journal Article] The atomic structure of a bulk metallic glass resolved by scanning tunneling microscopy and ab-initio molecular dynamics simulation2019
- Author(s)
  4.R.V. Belosludov, A.I. Oreshkin, S.I. Oreshkin, D.A. Muzychenko, H. Kato, D.V. Louzguine-Luzgin
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 816 Pages: 152680-152680
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Journal Article] Solid Solutions with bcc, hcp, and fcc Structures Formed in a Composition Line in Multicomponent Ir–Rh–Ru–W–Mo System2019
- Author(s)
  Takeuchi Akira、Wada Takeshi、Kato Hidemi
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 60 Issue: 11 Pages: 2267-2276
- DOI
  10.2320/matertrans.MT-M2019212
- NAID
  130007733046
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2019-11-01
- Language
  English
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-17H03375
[Journal Article] Low cost high specific surface architectured nanoporous metal with corrosion resistance produced by liquid metal dealloying from commercial nickel superalloy2019
- Author(s)
  Mokhtari Morgane、Wada Takeshi、Le Bourlot Christophe、Mary Nicolas、Duchet-Rumeau Jannick、Kato Hidemi、Maire Eric
- Journal Title
  
  Scripta Materialia
  
  Volume: 163 Pages: 5-8
- DOI
  10.1016/j.scriptamat.2018.12.023
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] On microstructural homogenization and mechanical properties optimization of biomedical Co-Cr-Mo alloy additively manufactured by using electron beam melting2019
- Author(s)
  Wei Daixiu、Anniyaer Ainiwaer、Koizumi Yuichiro、Aoyagi Kenta、Nagasako Makoto、Kato Hidemi、Chiba Akihiko
- Journal Title
  
  Additive Manufacturing
  
  Volume: 28 Pages: 215-227
- DOI
  10.1016/j.addma.2019.05.010
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PLANNED-18H05455, KAKENHI-PROJECT-17H01329
[Journal Article] Septenary Zr-Hf-Ti-Al-Co-Ni-Cu high-entropy bulk metallic glasses with centimeter-scale glass-forming ability2019
- Author(s)
  Wada Takeshi、Jiang Jing、Yubuta Kunio、Kato Hidemi、Takeuchi Akira
- Journal Title
  
  Materialia
  
  Volume: 7 Pages: 100372-100372
- DOI
  10.1016/j.mtla.2019.100372
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452, KAKENHI-PROJECT-17H03375
[Journal Article] Open porous dealloying-based biomaterials as a novel biomaterial platform2018
- Author(s)
  Okulov I.V.、Okulov A.V.、Soldatov I.V.、Luthringer B.、Willumeit-R?mer R.、Wada T.、Kato H.、Weissm?ller J.、Markmann J.
- Journal Title
  
  Materials Science and Engineering: C
  
  Volume: 88 Pages: 95-103
- DOI
  10.1016/j.msec.2018.03.008
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Preparation of hierarchical porous metals by two-step liquid metal dealloying2018
- Author(s)
  Wada Takeshi、Geslin Pierre-Antoine、Kato Hidemi
- Journal Title
  
  Scripta Materialia
  
  Volume: 142 Pages: 101-105
- DOI
  10.1016/j.scriptamat.2017.08.038
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06478
[Journal Article] A Ni-, Al-, Be-free Zr-based metallic glass for biomedical applications2018
- Author(s)
  Baulin Oriane、Fabr?gue Damien、Kato Hidemi、Wada Takeshi、Balvay Sandra、Hartmann Daniel J.、Pelletier Jean-Marc
- Journal Title
  
  Journal of Non-Crystalline Solids
  
  Volume: 500 Pages: 78-83
- DOI
  10.1016/j.jnoncrysol.2018.06.026
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Journal Article] Nanoporous magnesium2018
- Author(s)
  Okulov Ilya Vladimirovich、Lamaka Sviatlana V.、Wada Takeshi、Yubuta Kunio、Zheludkevich Mikhail L.、Weissm?ller J?rg、Markmann J?rgen、Kato Hidemi
- Journal Title
  
  Nano Research
  
  Volume: 11 Issue: 12 Pages: 6428-6435
- DOI
  10.1007/s12274-018-2167-9
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Journal Article] The mechanical cycling behavior of TiNi based crystal/glassy alloy in the superelastic mode2018
- Author(s)
  J. Jiang, D.X. Wei, T. Wada, D.V. Louzguine-Luzgin, H. Kato,
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 768 Pages: 176-180
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Journal Article] Spark Plasma Sintering of CoCrFeMnNi High-entropy Alloy Powders Produced by Mechanical Alloying2018
- Author(s)
  Joo Soo-Hyun、Wada Takeshi、Kato Hidemi、Hong Soon-Jik、Kim Hyoung Seop
- Journal Title
  
  Materia Japan
  
  Volume: 57 Issue: 7 Pages: 333-337
- DOI
  10.2320/materia.57.333
- NAID
  130007386681
- ISSN
  1340-2625, 1884-5843
- Language
  Japanese
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Microstructure characterization by X-ray tomography and EBSD of porous FeCr produced by liquid metal dealloying2018
- Author(s)
  Mokhtari Morgane、Le Bourlot Christophe、Adrien J?rome、Bonnin Anne、Wada Takeshi、Duchet-Rumeau Jannick、Kato Hidemi、Maire Eric
- Journal Title
  
  Materials Characterization
  
  Volume: 144 Pages: 166-172
- DOI
  10.1016/j.matchar.2018.06.032
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05452
[Journal Article] Imaging of 3D morphological evolution of nanoporous silicon anode in lithium ion battery by X-ray nano-tomography2018
- Author(s)
  Zhao Chonghang、Wada Takeshi、De Andrade Vincent、G?rsoy Do?a、Kato Hidemi、Chen-Wiegart Yu-chen Karen
- Journal Title
  
  Nano Energy
  
  Volume: 52 Pages: 381-390
- DOI
  10.1016/j.nanoen.2018.08.009
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Journal Article] Porous NiTi Particle Dispersed Mg-Zn-Ca Bulk Metallic Glass Matrix Composites2018
- Author(s)
  Guo Wei、Kato Hidemi、L? Shulin、Wu Shusen
- Journal Title
  
  Materials
  
  Volume: 11 Issue: 10 Pages: 1959-1959
- DOI
  10.3390/ma11101959
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Journal Article] The mechanical cycling behavior of TiNi based crystal/glassy alloy in the superelastic mode2018
- Author(s)
  Jiang J.、Wei D.X.、Wada T.、Louzguine-Luzgin D.V.、Kato H.
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 768 Pages: 176-180
- DOI
  10.1016/j.jallcom.2018.07.255
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Journal Article] Cold-rolling influence on microstructure and mechanical properties of NiCr-Ag composites and porous NiCr obtained by liquid metal dealloying2017
- Author(s)
  Morgane Mokhtari; Christophe Le Bourlot; Jer ome Adrien; Sylvain Dancette; Takeshi Wada; Jannick Duchet-Rumeau; Hidemi Kato; Eric Maire
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 707 Pages: 251-256
- DOI
  10.1016/j.jallcom.2016.12.105
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009, KAKENHI-PROJECT-15K06478
[Journal Article] Preparation of Nanoporous Si by Dealloying in Metallic Melt and Its Application for Negative Electrode of Lithium Ion Battery2017
- Author(s)
  Wada Takeshi、Kato Hidemi
- Journal Title
  
  Materials today : proceedings
  
  Volume: 4 Issue: 11 Pages: 11465-11469
- DOI
  10.1016/j.matpr.2017.09.030
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K06478
[Journal Article] Three-Dimensional Morphological and Chemical Evolution of Nanoporous Stainless Steel by Liquid Metal Dealloying2017
- Author(s)
  Zhao Chonghang、Wada Takeshi、De Andrade Vincent、Williams Garth J.、Gelb Jeff、Li Li、Thieme Juergen、Kato Hidemi、Chen-Wiegart Yu-chen Karen
- Journal Title
  
  ACS APPLIED MATERIALS & INTERFACES
  
  Volume: 9 Issue: 39 Pages: 34172-34184
- DOI
  10.1021/acsami.7b04659
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06478
[Journal Article] X-ray phase imaging using a Gd-based absorption grating fabricated by imprinting technique2016
- Author(s)
  W. Yashiro, K. Kato, M. Sadeghilaridjani, A. Momose, T. Shinohara, and H. Kato
- Journal Title
  
  Jpn. J. Appl. Phys.
  
  Volume: 55 Issue: 4 Pages: 048003-048003
- DOI
  10.7567/jjap.55.048003
- NAID
  210000146259
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26600137, KAKENHI-PROJECT-26630341
[Journal Article] Evolution of a bicontinuous nanostructure via a solid-state interfacial dealloying reaction2016
- Author(s)
  Wada, Takeshi; Yubuta, Kunio ; Kato, Hidemi
- Journal Title
  
  SCRIPTA MATERIALIA
  
  Volume: 118 Pages: 33-36
- DOI
  10.1016/j.scriptamat.2016.03.008
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25246009, KAKENHI-PROJECT-15K06478
[Journal Article] Preparation of three-dimensional nanoporous Si using dealloying by metallic melt and application as a lithium-ion rechargeable battery negative electrode2016
- Author(s)
  T. Wada, J. Yamada, H. Kato
- Journal Title
  
  Journal of Power Sources
  
  Volume: 306 Pages: 8-16
- DOI
  10.1016/j.carbon.2015.09.093
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25246009
[Journal Article] Formation of porous layer with low Ni content on NiTi substrate by dealloying in metallic melts2016
- Author(s)
  Kyosuke UEDA, Ryuma HASHIMOTO, Masahiro HIROHASHI, Takeshi WADA, Hidemi KATO, Takayuki NARUSHIMA
- Journal Title
  
  粉体および粉末冶金
  
  Volume: 63 Pages: 766-770
- NAID
  130005253114
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25246009
[Journal Article] Three dimensional analysis of nanoporous silicon particles for Li-ion batteries2016
- Author(s)
  Roiban, Lucian; Koneti, Siddardha; Wada, Takeshi; Kato, Hidemi; et al
- Journal Title
  
  MATERIALS CHARACTERIZATION
  
  Volume: 124 Pages: 165-170
- DOI
  10.1016/j.matchar.2016.12.013
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009, KAKENHI-PROJECT-15K06478
[Journal Article] Enlarging the surface area of an electrolytic capacitor of porous niobium by Mg-Ce eutectic liquid dealloying2016
- Author(s)
  Kim, Joung Wook; Wada, Takeshi; Kim, Sung Gyoo; Kato, Hidemi
- Journal Title
  
  SCRIPTA MATERIALIA
  
  Volume: 122 Pages: 68-71
- DOI
  10.1016/j.scriptamat.2016.05.014
- Peer Reviewed / Acknowledgement Compliant / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009, KAKENHI-PROJECT-15K06478
[Journal Article] Preparation of three-dimensional nanoporous Si using dealloying by metallic melt and application as a lithium-ion rechargeable battery negative electrode2016
- Author(s)
  T. Wada, J. Yamada, H. Kato
- Journal Title
  
  Journal of Power Sources
  
  Volume: 306 Pages: 8-16
- DOI
  10.1016/j.jpowsour.2015.11.079
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K06478
[Journal Article] Optimizing niobium dealloying with metallic melt to fabricate porous structure for electrolytic capacitors2015
- Author(s)
  J. W. Kim, M. Tsuda, T. Wada, K. Yubuta, S. G. Kim, H. Kato
- Journal Title
  
  Acta Materialia
  
  Volume: 84 Pages: 497-505
- DOI
  10.1016/j.actamat.2014.11.002
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25246009
[Journal Article] ひずみ解放機構を有するオープンセル型バルクナノポーラス材料のリチウム蓄電池負極特性2015
- Author(s)
  市坪　哲、和田　武、加藤　秀実
- Journal Title
  
  工業材料
  
  Volume: 3 Pages: 38-44
- Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25246009
[Journal Article] Sub-micron porous niobium solid electrolytic capacitor prepared by dealloying in a metallic melt2014
- Author(s)
  Kim, JW ; Wada, T. ; Kim, SG ; Kato, H
- Journal Title
  
  Materials Letters
  
  Volume: Vol.116 Pages: 223-226
- DOI
  10.1016/j.matlet.2013.11.036
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656422, KAKENHI-PROJECT-24760566
[Journal Article] リチウムイオン蓄電池負極用大比表面積オープンセル型ポーラスシリコン粉末の開発2014
- Author(s)
  和田　武、市坪　哲、湯葢　邦夫、吉田　浩一、瀬川　春彦、加藤　秀実
- Journal Title
  
  化学工業
  
  Volume: 65 Pages: 25-32
- Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25246009
[Journal Article] Bulk-nanoporous-silicon negative electrode with extremely high cyclability for lithium-ion batteries prepared using a top-down process2014
- Author(s)
  T. Wada, T. Ichitsubo, K. Yubuta, H. Segawa, H. Yoshida, H. Kato
- Journal Title
  
  Nano Letters
  
  Volume: 14 Issue: 8 Pages: 4505-4510
- DOI
  10.1021/nl501500g
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25246009
[Journal Article] A metallic glass grating for X-ray grating interferometers fabricated by imprinting2014
- Author(s)
  W. Yashiro, D. Noda, T. Hattori, K. Hayashi, A. Momose, and H. Kato
- Journal Title
  
  Appl. Phys. Exp.
  
  Volume: 7 Issue: 3 Pages: 32501-32501
- DOI
  10.7567/apex.7.032501
- NAID
  210000137015
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24310087, KAKENHI-PROJECT-24656004, KAKENHI-PROJECT-25286040, KAKENHI-PROJECT-26630341
[Journal Article] 金属ガラスの複雑緩和挙動と弾性不均質構造の相関関係に関する研究2013
- Author(s)
  市坪哲、雪谷俊介、松原英一郎、加藤秀実
- Journal Title
  
  材料
  
  Volume: 62巻 Pages: 167-171
- NAID
  130003367145
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Shear banding behavior and fracture mechanisms of Zr55Al10Ni5Cu30 bulk metallic glass in uniaxial compression analyzed using a digital image2013
- Author(s)
  Joo, SH; Kato, H; Gangwar, K; Lee, S; Kim, HS
- Journal Title
  
  INTERMETALLICS
  
  Volume: Vol.32 Pages: 21-29
- DOI
  10.1016/j.intermet.2012.08.013
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Louzguine-Luzgin, DV, Viscous flow of Cu55Zr30Ti10Co5 bulk metallic glass in glass-transition and semi-solid regions2013
- Author(s)
  Ketov, SV; Inoue, A; Kato, H
- Journal Title
  
  SCRIPTA MATERIALIA
  
  Volume: Vol.68 Issue: 3-4 Pages: 219-222
- DOI
  10.1016/j.scriptamat.2012.10.037
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Correlation between the enhanced plasticity of glassy matrix composites and the intrinsic mechanical property of reinforcement2013
- Author(s)
  Chu, ZH; Kato, H; Xie, GQ; Yuan, GY; Lu, C; Ding, WJ
- Journal Title
  
  MATERIALS SCIENCE AND ENGINEERINGA-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
  
  Volume: Vol.560 Pages: 40-46
- DOI
  10.1016/j.msea.2012.08.118
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Kinetics of formation and coarsening of nanoporous a-titanium dealloyed with Mg melt2013
- Author(s)
  Tsuda, Masashi; Wada, Takeshi; Kato, Hidemi
- Journal Title
  
  JOURNAL OF APPLIED PHYSICS
  
  Volume: 114 Issue: 11 Pages: 113503-113503
- DOI
  10.1063/1.4821066
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656422, KAKENHI-PROJECT-24760566
[Journal Article] Development of Open-Cell Porous Metals and Alloys with Base and Half Metal Elements2013
- Author(s)
  加藤秀実
- Journal Title
  
  Materia Japan
  
  Volume: 52 Issue: 8 Pages: 395-403
- DOI
  10.2320/materia.52.395
- NAID
  10031189522
- ISSN
  1340-2625, 1884-5843
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656422
[Journal Article] Pd42.5Ni7.5Cu30P20 金属ガラスの動的緩和挙動2013
- Author(s)
  加藤秀実
- Journal Title
  
  粉体および粉末冶金
  
  Volume: 60
- NAID
  130003367309
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Three-dimensional open-cell macroporous iron, chromium and ferritic stainless steel2013
- Author(s)
  Wada, T ; Kato, H
- Journal Title
  
  Scripta Materialia
  
  Volume: Vol.68 Issue: 9 Pages: 723-726
- DOI
  10.1016/j.scriptamat.2013.01.011
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656422, KAKENHI-PROJECT-24760566
[Journal Article] 3D morphological evolution of porous titanium by x-ray micro- and nano-tomography2013
- Author(s)
  Chen-Wiegart, YCK ; Wada, T ; Butakov, N ; Xiao, XH ; De Carlo, F ; Kato, H, et al
- Journal Title
  
  Journal of Materials Research
  
  Volume: Vol.28 Issue: 17 Pages: 2444-2452
- DOI
  10.1557/jmr.2013.151
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656422
[Journal Article] Pd_<42.5>Ni_<7.5>Cu_<30>P_<20>金属ガラスの動的緩和挙動2013
- Author(s)
 加藤秀実
- Journal Title
 
 粉体および粉末冶金
 
 Volume: (印刷中)
- NAID
 10031178153
- Data Source
 KAKENHI-PROJECT-22360263
[Journal Article] 金属ガラスの複雑緩和挙動と弾性不均質構造の相関関係に関する研究2013
- Author(s)
  市坪　哲、雪谷俊介、松原英一郎、加藤秀実
- Journal Title
  
  材料
  
  Volume: 62 Pages: 167-171
- NAID
  130003367145
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] A partial structure factor investigation of thebulk metallic glass Zr63Ni25Al12 as studied by using a combination of anomalous X-ray scattering and reverse Monte Carlo modeling2012
- Author(s)
  Hosokawa, S; Berar, JF; Boudet, N; Kohara, S; Pilgrim, WC; Joester, M; Stellhorn, J; Zeidler, A; Maruyama, K; Nasu, T; Zhang, W; Kato, H
- Journal Title
  
  INTERNATIONAL JOURNAL OF MATERIALS RESEARCH
  
  Volume: Vol.103 Issue: 9 Pages: 1108-1112
- DOI
  10.3139/146.110774
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263, KAKENHI-PROJECT-23540441
[Journal Article] The effect of nanoquasicrystals on mechanical properties of as-extruded Mg-Zn-Gd alloy2012
- Author(s)
  Huang, H; Kato, H; Chen, CL; Wang, ZC; Yuan, GY
- Journal Title
  
  MATERIALS LETTERS
  
  Volume: Vol.79 Pages: 281-283
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Relationship between the Reinforcement Size and Mechanical Properties of Zr-Based Glassy Matrix Composites2012
- Author(s)
  Chu, ZH; Kato, H; Wada, T; Xie, GQ; Yuan, GY; Ding, WJ
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 53 Pages: 879-884
- NAID
  10030629379
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] 金属溶湯中で生じる脱成分反応を用いた卑・半金属系ポーラス材料の開発と傾斜機能材料への応用2012
- Author(s)
  加藤秀実、和田　武
- Journal Title
  
  セラミックス
  
  Volume: 47 Pages: 913-919
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656422
[Journal Article] Evaluation of compressive deformation behavior of Zr_55Al_10Ni_5Cu_30 bulk metallic glass containing ZrC particles by synchrotron X-ray diffraction2012
- Author(s)
  H. Suzuki, J. Saida, T. Shobu, J. Katsuyama, H. Kato, M. Imafuku and S. Sato
- Journal Title
  
  Scripta Mater.
  
  Volume: Vol.55 Issue: 10 Pages: 801-804
- DOI
  10.1016/j.scriptamat.2012.02.016
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246094, KAKENHI-PROJECT-22360263, KAKENHI-PROJECT-23246109
[Journal Article] Consolidation and Mechanical Properties of Cu46Zr42Al7Y5 Metallic Glass by Spark Plasma Sintering2012
- Author(s)
  Z.H. Chu
- Journal Title
  
  Journal of Non Crystalline Solids
  
  Volume: 358 Issue: 10 Pages: 1263-1267
- DOI
  10.1016/j.jnoncrysol.2012.02.027
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20226013, KAKENHI-PROJECT-22360263
[Journal Article] Relationshipbetween the Reinforcement Size and Mechanical Properties of Zr-Based Glassy Matrix Composites2012
- Author(s)
  Chu, ZH; Kato, H; Wada, T; Xie, GQ; Yuan, GY; Ding, WJ
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: Vol.53 Pages: 879-884
- NAID
  10030629379
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] A, Enhance the thermal stability and glass forming ability of Al-based metallic glass by Caminor-alloying2012
- Author(s)
  Wang, JQ; Liu, YH; Imhoff, S; Chen, N; Louzguine-Luzgin, DV; Takeuchi, A; Chen, MW; Kato, H; Perepezko, JH; Inoue
- Journal Title
  
  INTERMETALLICS
  
  Volume: Vol.29 Pages: 35-40
- DOI
  10.1016/j.intermet.2012.04.009
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Constitutive model for high temperature deformation behavior of Ti-Zr-Ni-Be bulk metallic glass in supercooled liquid region2012
- Author(s)
  Jun, HJ; Lee, KS; Kato, H; Kim, HS; Chang, YW
- Journal Title
  
  COMPUTATIONAL MATERIALS SCIENCE
  
  Volume: Vol.61 Pages: 213-223
- DOI
  10.1016/j.commatsci.2012.04.006
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] The effect of Co addition on glassy forming ability and soft magnetic properties of e-Si-B-P bulk metallic glass2012
- Author(s)
  Li, X., Zhang, Y., Kato, H., Makino, A., Inoue, A.
- Journal Title
  
  Key Engineering Materials
  
  Volume: 508 Pages: 112-116
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23246119
[Journal Article] 金属溶湯中で生じる脱成分反応を用いた卑・半金属系ポーラス材料の開発と傾斜機能材料への応用2012
- Author(s)
  加藤秀実, 和田武
- Journal Title
  
  セラミックス
  
  Volume: Vol.47 Pages: 913-919
- URL
  https://member.ceramic.or.jp/journal/vol_no/47/12/47_12.html
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656422
[Journal Article] Thermodynamic approach toglass-forming ability ofwater-quenched Pd-P-based and Pd60Ni15P25 bulk metallic glasses2011
- Author(s)
  O. Haruyama, T. Watanabe, K. Yuki, M.Horiuchi, H. Kato, N. Nishiyama
- Journal Title
  
  Physical Review B
  
  Volume: Vol.83 Issue: 6
- DOI
  10.1103/physrevb.83.064201
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Improved plasticity ofiron-based high-strength bulk metallic glasses by copper-induced nanocrystallization2011
- Author(s)
  X. Li, H. Kato, K. Yubuta, A. Makino, A. Inoue
- Journal Title
  
  J. Noncryst. Solids
  
  Volume: Vol.357 Issue: 15 Pages: 3002-3005
- DOI
  10.1016/j.jnoncrysol.2011.04.004
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263, KAKENHI-PROJECT-23246119
[Journal Article] Nano- to submicro-porous beta-Ti alloy prepared from dealloying in a metallic melt2011
- Author(s)
  T. Wada, A. D. Setyawan, K. Yubuta, H. Kato
- Journal Title
  
  Scripta Materialia
  
  Volume: 65 Pages: 532-535
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656422
[Journal Article] Mo microalloying effect on the glass-forming ability, magnetic, mechanical and corrosion propertiesof (Fe_<0.76>Si_<0.096>B_<0.084>P_<0.06>)_<100-x>Mo_x bulk glassy alloys2011
- Author(s)
 X. Li, C. Qin, H. Kato, A. Makino, A.Inoue
- Journal Title
 
 J. Alloys and Compounds
 
 Volume: Vol.509 Issue: 29 Pages: 7688-7691
- DOI
 10.1016/j.jallcom.2011.04.081
- Peer Reviewed
- Data Source
 KAKENHI-PROJECT-22360263
[Journal Article] Static heterogeneity in metallic glasses and its correlation to physical properties2011
- Author(s)
  T.Ichitsubo, H.Kato, et al
- Journal Title
  
  Journal of Non-Crystalline Solids
  
  Volume: 357 Pages: 494-500
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Static heterogeneity in metallic glasses and its correlation to physical properties2011
- Author(s)
  T. Ichitsubo, H. Kato, E. Matsubara, S. Biwa, S. Hosokawa, K. Matsuda, H. Uchiyama, A. Q. R. Baron
- Journal Title
  
  Journal of Non-Crystalline Solids
  
  Volume: Vol.357 Issue: 2 Pages: 494-500
- DOI
  10.1016/j.jnoncrysol.2010.06.056
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246094, KAKENHI-PROJECT-22360263
[Journal Article] Cooling Process and Cast Structure of Zr-Al-Ni-Cu-Based Bulk Metallic Glasses Produced in Various Atmospheres2011
- Author(s)
  J.Saida, A.D.Setyawan, H.Kato and A.Inoue
- Journal Title
  
  Met. Mater. Trans. A
  
  Volume: Vol.42A Issue: 6 Pages: 1450-1455
- DOI
  10.1007/s11661-010-0444-7
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246094, KAKENHI-PROJECT-22360263
[Journal Article] Nano- to submicro-porous beta-Ti alloy prepared from dealloying in a metallic melt2011
- Author(s)
  T.Wada, A.D.Setyawan, et.al.
- Journal Title
  
  Scripta Materialia
  
  Volume: 65 Issue: 6 Pages: 532-535
- DOI
  10.1016/j.scriptamat.2011.06.019
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21760544, KAKENHI-PROJECT-23656422
[Journal Article] Pd_20Pt_20Cu_20Ni_20P_20 High-Entropy Alloy as a Bulk Metallic Glass in the Centimeter2011
- Author(s)
  A. Takeuchi, N. Chen, T. Wada, Y. Yokoyama, H. Kato, A. Inoue and J.-W. Yeh
- Journal Title
  
  Intermetallics
  
  Volume: 19 Issue: 10 Pages: 1546-1554
- DOI
  10.1016/j.intermet.2011.05.030
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20226013, KAKENHI-PROJECT-21560715
[Journal Article] Fe_<76>Si_<9.6>B_<8.4>P6 glassy powder soft-magnetic cores with low are loss prepared by spark-plasma sintering2011
- Author(s)
 X. Li, A. Makino, H. Kato, A. Inoue, K. Yubuta
- Journal Title
 
 Mater. Sci Eng A
 
 Volume: Vol.176 Issue: 15 Pages: 1247-1250
- DOI
 10.1016/j.mseb.2011.06.017
- Peer Reviewed
- Data Source
 KAKENHI-PROJECT-22360263, KAKENHI-PROJECT-23246119
[Journal Article] Vogel-Fulcher-Tammann plot for viscosity scaled with temperature interval between actual and ideal glass transition for metallic glasses in liquid and supercooled liquid states2010
- Author(s)
  A.Takeuchi, H.Kato, A.Inoue
- Journal Title
  
  Intermetallics
  
  Volume: 18 Pages: 406-411
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Deformation-induced structural transformation leading to ductility in Zr_<65>Al_<7.5>Ni_<10>Cu_<12.5>M_5 (M=Nb, Pd) glassy alloys2010
- Author(s)
 A. D. Setyawan, J. Saida, H. Kato, M. Matsushita, A. Inoue
- Journal Title
 
 J.Mater.Res. (印刷中)
- Peer Reviewed
- Data Source
 KAKENHI-PROJECT-19360309
[Journal Article] In situ phase separation and flow behavior in the glass transition2010
- Author(s)
  DV.Louzgine-Luzgin, T.Wada, H.Kato, J.Perpezko, A.Inoue
- Journal Title
  
  J.Alloys and Compounds
  
  Volume: 18 Pages: 1235-1239
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Comparing the origin of ductility in the Zr-Al-Ni-Cu-M (M=Nb, Pd) metallic glasses2010
- Author(s)
  AD.Setyawan, J.Saida, H.Kato, M.Matsushita, A.Inoue
- Journal Title
  
  Intermetallics
  
  Volume: 18 Pages: 1884-1888
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Elastic inhomogeneity and acoustic phonons in Pd-, Pt-, and Zr-based metallic glasses2010
- Author(s)
  T. Ichitsubo, H. Kato, et al
- Journal Title
  
  Physical Review B
  
  Volume: Vol.81 Issue: 17 Pages: 172201-172201
- DOI
  10.1103/physrevb.81.172201
- NAID
  120002576617
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Elastic inhomogeneity and acoustic phonons in Pd-, Pt-, and Zr-based metallic glasses2010
- Author(s)
  T.Ichitsubo, H.Kato, et al
- Journal Title
  
  Physical Review B
  
  Volume: 81 Pages: 172201-172201
- NAID
  120002576617
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Deformation-induced structural transformation leading to ductility inZr65Al7.5Ni10Cu12.5M5 (M=Nb, Pd) glassy alloys2010
- Author(s)
  A.D. Setyawan, J. Saida, , H. Kato, M. Matsushita, A. Inoue
- Journal Title
  
  J. Materials Research
  
  Volume: Vol.25 Issue: 6 Pages: 1149-1158
- DOI
  10.1557/jmr.2010.0153
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246094, KAKENHI-PROJECT-22360263
[Journal Article] Effect of Cu on nanocrystallization and plastic properties of FeSiBPCu bulk metallic glasses2010
- Author(s)
  X.Li, H.Kato, et al
- Journal Title
  
  Materials Science and Engineering A
  
  Volume: 527 Pages: 2598-2602
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Atomic-Scale Characterization of Elastic Deformation of Zr-Based Metallic Glass under Tensile Stress2010
- Author(s)
  S. Sato. H. Suzuki, T. Shobu, M.Imafuku, Y. Tsuchiya, K. Wagatsuma, H. Kato, AD. Setyawan, J. Saida
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 51 Issue: 8 Pages: 1381-1385
- DOI
  10.2320/matertrans.M2010052
- NAID
  10026513451
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Deformation-induced structural transformation leading to compressive plasticity in Zr_<65>Al_<7.5>Ni_<10>Cu_<12.5>M_5 (M=Nb, Pd) glassy alloys2010
- Author(s)
 AD.Setyawan, J.Saida, H.Kato, M.Matsushita, A.Inoue
- Journal Title
 
 J.Mat.Res
 
 Volume: 25 Pages: 1149-1158
- Peer Reviewed
- Data Source
 KAKENHI-PROJECT-22360263
[Journal Article] Plastic deformation by glassy structure control in Zr-Al-Ni-Cu based BMGs2010
- Author(s)
  J.Saida, A.D.Setyawan, H.Kato, M.Matsushita, A.Inoue
- Journal Title
  
  J.Alloys and Compounds
  
  Volume: 504S
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Atomic-Scale Characterization of Elastic Deformation of Zr-Based Metallic Glass under Tensile Stress2010
- Author(s)
  S.Sato, H.Suzuki, T.Shobu, M.Imafuku, Y.Tsuchiya, K.Wagatsuma, H.Kato, AD.Setyawan, J.Saida
- Journal Title
  
  Mater.Trans.
  
  Volume: 51 Pages: 1381-1385
- NAID
  10026513451
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360263
[Journal Article] Correlation of Dynamic and Quasistatic Relaxations : The Cox-Merz Rule for Metallic Glass2009
- Author(s)
  H.Kato
- Journal Title
  
  Applied Physics Letters 95
- NAID
  120002086114
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20226013
[Journal Article] Tailoring thermally induced nano-quasicrystallization and deformation assisted nanocrystallization for mechanical property improvement in Zr-Al-Ni-Cu-Pd bulk metallic glass2009
- Author(s)
  J. Saida, A. D. Setyawan, H. Kato, M. Matsushita, A. Inoue
- Journal Title
  
  Mater.Trans. 50巻
  
  Pages: 2079-2086
- NAID
  10025155221
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360309
[Journal Article] Evaluation of residual stress and deformation behavior on Zr_<55>Al_<10>Ni_5Cu_<30> bulk metallic glass containing ZrC particles using neutron diffraction2009
- Author(s)
 H. Suzuki, J. Saida, H. Kato, A. D. Setyawan, M. Imafuku
- Journal Title
 
 Scripta Mater. 60巻
 
 Pages: 725-728
- Peer Reviewed
- Data Source
 KAKENHI-PROJECT-19360309
[Journal Article] Temperature Dependence of the Yield Strain of a Zr-Based Metallic Glass at the Glassy State2009
- Author(s)
  H.Kato
- Journal Title
  
  Journal of Alloys and Compounds 483
  
  Pages: 150-153
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20226013
[Journal Article] Nanostructure controlling in Zr-based metallic glasses using icosahedral local structure2009
- Author(s)
  J. Saida, H. Kato, A. D. Setyawan, K. Yoshimi, A. Inoue
- Journal Title
  
  J.Alloys Compd. 483巻
  
  Pages: 231-234
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360309
[Journal Article] Temperature Dependence of the Yield Strain of a Zr-Based Metallic Glass at the Glassy State2009
- Author(s)
  H. Kato
- Journal Title
  
  Journal of Alloys and Compounds (In press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20226013
[Journal Article] Free-volume-induced enhancement of plasticity in a monolithic bulk metallic glass at room temperature2008
- Author(s)
  L. Y. Chen, A. D. Setyawan, H. Kato, A. Inoue, G. Q. Zhang, J. Saida, X. D. Wang, Q. P. Cao, J. Z. Jiang
- Journal Title
  
  Scripta Mater. 59巻
  
  Pages: 75-78
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360309
[Journal Article] Relationship between Thermal Expansion Coefficient and Glass Transition Temperature in Metallic Glasses2008
- Author(s)
  H. Kato
- Journal Title
  
  Scripta Materialia 58
  
  Pages: 1106-1109
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20226013
[Journal Article] Another Clue to Understand the Yield Phenomenon at the Glassy State in a Zr_<55>Al_<10>Ni_<5>Cu_<30> Metallic Glass2008
- Author(s)
 H. Kato
- Journal Title
 
 Materials Letters 62
 
 Pages: 1592-1594
- Peer Reviewed
- Data Source
 KAKENHI-PROJECT-20226013
[Journal Article] Glass formation dependence on casting-atmosphere pressure in Zr_<65>Al_<7.5>Ni_<10>Cu_<17.5-x>Pd_x (x=0-17.5) alloy system : A resultant effect of quasicrystalline phase transformation and cooling mechanism during mold-casting process2008
- Author(s)
 A. D. Setyawan, H. Kato, J. Saida, A. Inoue
- Journal Title
 
 J.Appl.Phys. 103巻
 
 Pages: 0449071-8
- Peer Reviewed
- Data Source
 KAKENHI-PROJECT-19360309
[Journal Article] Evidence for effect of hydrostatic pressure during casting on glass-forming ability in Zr_<65>Al_<7.5>Ni_<10>Cu_<17.5-x>Pd_x (x=0-17.5) alloys2007
- Author(s)
 A. D. Setyawan, H. Kato, J. Saida, A. Inoue
- Journal Title
 
 Mater. Sci. Eng A-Structural Materials Properties Microstructure and Processing 449
 
 Pages: 903-906
- Peer Reviewed
- Data Source
 KAKENHI-PROJECT-18029003
[Journal Article] Thermal conductivity of an alloy in relation to observed cooling rate and glass forming ability2007
- Author(s)
  D. V. Louzguine-Luzgin, A. D. Setyawan, H. Kato, A. Inoue
- Journal Title
  
  Philosophical Magazine 87
  
  Pages: 1845-1854
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18029003
[Journal Article] Softening and heating behaviors during the nonlinear viscous flow in a Zr-based bulk metallic glass2007
- Author(s)
  H. Kato, A. Inoue and H. S. Chen
- Journal Title
  
  Journal of Non-crystalline Solids 353
  
  Pages: 3764-3768
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18029003
[Journal Article] Origin of the effect of the gas atmosphere during mold-casting Zr_<65>Al_<10>Ni_5Cu_<17.5> bulk metallic glassy or nanoquasicrystal-forming alloy2007
- Author(s)
 A. D. Setyawan, H. Kato, J. Saida, A. Inoue
- Journal Title
 
 Materials Transactions 48
 
 Pages: 1266-1271
- Peer Reviewed
- Data Source
 KAKENHI-PROJECT-18029003
[Journal Article] Deformation induced nanoscale dynamic transformation studies in Zr-Al-Ni-Pd and Zr-Al-Ni-Cu bulk metallic glasses2007
- Author(s)
  J. Saida, H. Kato, A. D. Setyawan, A. Inoue
- Journal Title
  
  Materials Transactions 48
  
  Pages: 1266-1271
- NAID
  10019486426
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18029003
[Journal Article] On structural relaxation and viscous work heating during the non-Newtonian viscous flow in a Zr_<55>Al_<10>Ni_5Cu_<30> bulk metallic glass2006
- Author(s)
 H.Kato, A.Inoue, H.S.Chen
- Journal Title
 
 Acta Mater. 54
 
 Pages: 891-898
- Data Source
 KAKENHI-PROJECT-18029003
[Journal Article] Hydrogen-induced internal friction of Ti-rich multicomponent glassy alloys2006
- Author(s)
  M.Hasegawa, M.Takeuchi, H.Kato, S.Yamaura, A.Inoue
- Journal Title
  
  Mater. Sci. Eng. A442
  
  Pages: 106-108
- Data Source
  KAKENHI-PROJECT-18029003
[Journal Article] Fragility and thermal stability of Pt- and Pd- based bulk glass forming liquids and their correlation with deformability2006
- Author(s)
  H.Kato, T.Wada, M.Hasegawa, A.Inoue, J.Saida, H.S.Chen
- Journal Title
  
  Scripta Mater. 54
  
  Pages: 2023-2027
- Data Source
  KAKENHI-PROJECT-18029003
[Journal Article] Influence of thermal conductivity on the glass-forming ability of Ni-based and Cu-based alloys2006
- Author(s)
  DV.Louzgunie-Luzgin, AD Setyawan, H.Kato, A.Inoue
- Journal Title
  
  Appl. Phys. Lett. 88
  
  Pages: 251902-251902
- Data Source
  KAKENHI-PROJECT-18029003
[Journal Article] Internal friction of and mechanical strength on hydrogenated Ti-rich multicomponent glassy alloys2006
- Author(s)
  M.Hasegawa, M.Takeuchi, D.Nagta, T.Wada, H.Kato, S.Yamaura, A.Inoue
- Journal Title
  
  Key Eng. Mater 319
  
  Pages: 139-143
- Data Source
  KAKENHI-PROJECT-18029003
[Journal Article] Fictive Stress Model Calculations of Viscoelastic Behaviors in a Zr-based Glassy Alloy.2004
- Author(s)
  H.Kato
- Journal Title
  
  Strength, Fracture and Complexity 2
  
  Pages: 21-33
- Data Source
  KAKENHI-PROJECT-15760513
[Journal Article] Influence of In-situ Nanoprecipitation on Constant Load Deformation in the Glass Transition Region in a Cu_<60>Zr_<30>Ti<10> Bulk Metallic Glass.2004
- Author(s)
 H.Kato
- Journal Title
 
 Mater.Trans. 45
 
 Pages: 2383-2388
- Data Source
 KAKENHI-PROJECT-15760513
[Journal Article] A fictive Stress Model Calculation of Creep Deformation of Zr-Based Bulk Metallic Glass in the Glass Transition Region under a Constant Load.2004
- Author(s)
  H.Kato
- Journal Title
  
  Jpn.J.Appl Phys. 43
  
  Pages: 8185-8189
- NAID
  10014216415
- Data Source
  KAKENHI-PROJECT-15760513
[Journal Article] Influences of Pd Content and Hydrostatic Pressure during Casting on As-Cast Phase in Zr-Al-Ni-Cu-Pd bulk alloys.2004
- Author(s)
  H.Kato
- Journal Title
  
  Appl.Phys.Lett. 85
  
  Pages: 2205-2207
- Data Source
  KAKENHI-PROJECT-15760513
[Journal Article] Influence of Nanopricipitation on Strength of Cu_<60>Zr_<30>Ti_<10> Glass Containing μm-ZrC Reinforcements2004
- Author(s)
 H.Kato
- Journal Title
 
 Scripta Mater. 51
 
 Pages: 577-581
- Data Source
 KAKENHI-PROJECT-15760513
[Journal Article] Influence of Hydrostatic Pressure during Casting on as Cast Structure and Mechanical Properties in Zr_<65>Al_<7.5>Ni_<10>Cu_<17.5-x>Pd_x (x=0, 17.5) Alloys2004
- Author(s)
 H.Kato
- Journal Title
 
 Scripta Mater. 51
 
 Pages: 1063-1068
- Data Source
 KAKENHI-PROJECT-15760513
[Patent] 金属部材の製造方法および金属部材2023
- Inventor(s)
  和田武、加藤秀実
- Industrial Property Rights Holder
  和田武、加藤秀実
- Industrial Property Rights Type
  特許
- Filing Date
  2023
- Overseas
- Data Source
  KAKENHI-PROJECT-23K26398
[Patent] 金属部材の製造方法および金属部材2022
- Inventor(s)
  和田武、加藤秀実
- Industrial Property Rights Holder
  東北大学
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2022-140750
- Filing Date
  2022
- Data Source
  KAKENHI-PROJECT-21H04611
[Patent] 金属部材の製造方法および金属部材2022
- Inventor(s)
  和田武、加藤秀実
- Industrial Property Rights Holder
  和田武、加藤秀実
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2022-140750
- Filing Date
  2022
- Data Source
  KAKENHI-PROJECT-20K05126
[Patent] 脱成分中に形成する無孔性粒子の低減方法2020
- Inventor(s)
  加藤　秀実、和田　武
- Industrial Property Rights Holder
  ㈱東北テクノアーチ、TPR株式会社
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2020-164656
- Filing Date
  2020
- Data Source
  KAKENHI-PROJECT-20K05126
[Patent] ポーラス金属2019
- Inventor(s)
  加藤秀実　朱修賢
- Industrial Property Rights Holder
  加藤秀実　朱修賢
- Industrial Property Rights Type
  特許
- Filing Date
  2019
- Data Source
  KAKENHI-PLANNED-18H05452
[Patent] ポーラス金属2019
- Inventor(s)
  加藤秀実
- Industrial Property Rights Holder
  加藤秀実
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2019-019274
- Filing Date
  2019
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Patent] 波面制御素子の製造方法2018
- Inventor(s)
  矢代航, 加藤秀実, 北條大介
- Industrial Property Rights Holder
  矢代航, 加藤秀実, 北條大介
- Industrial Property Rights Type
  特許
- Filing Date
  2018
- Acquisition Date
  2021
- Data Source
  KAKENHI-PLANNED-18H05452
[Patent] 波面制御素子の製造方法2018
- Inventor(s)
  矢代航, 加藤秀実, 北條大介
- Industrial Property Rights Holder
  矢代航, 加藤秀実, 北條大介
- Industrial Property Rights Type
  特許
- Filing Date
  2018
- Acquisition Date
  2021
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Patent] 多孔質炭素材料の製造方法および球状の多孔質炭素材料2018
- Inventor(s)
  加藤秀実、津田雅史、高野勇郷、鈴木庸介、茅野務、鎌田晃二他
- Industrial Property Rights Holder
  加藤秀実、津田雅史、高野勇郷、鈴木庸介、茅野務、鎌田晃二他
- Industrial Property Rights Type
  特許
- Filing Date
  2018
- Acquisition Date
  2022
- Overseas
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Patent] 成形材料の製造方法、成形材料、波面制御素子および回折格子2016
- Inventor(s)
  加藤秀実、矢代航
- Industrial Property Rights Holder
  東北大学
- Industrial Property Rights Type
  特許
- Filing Date
  2016-06-17
- Overseas
- Data Source
  KAKENHI-PROJECT-26600137
[Patent] ポーラス部材の製造方法2016
- Inventor(s)
  和田武、加藤　秀実
- Industrial Property Rights Holder
  和田武、加藤　秀実
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2016-026731
- Filing Date
  2016-02-16
- Data Source
  KAKENHI-PROJECT-15K06478
[Patent] ナノ複合金属部材の製造方法および相分離系金属固体同士の接合方法2016
- Inventor(s)
  和田武、加藤　秀実
- Industrial Property Rights Holder
  和田武、加藤　秀実
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2016-026732
- Filing Date
  2016-02-16
- Data Source
  KAKENHI-PROJECT-15K06478
[Patent] 成形材料の製造方法、成形材料、波面制御素子および回折格子2015
- Inventor(s)
  加藤　秀実、矢代　航
- Industrial Property Rights Holder
  加藤　秀実、矢代　航
- Industrial Property Rights Type
  特許
- Filing Date
  2015-06-22
- Data Source
  KAKENHI-PROJECT-26630341
[Presentation] 金属溶湯脱成分法を応用した非混和性純Ti/純Mgの機械的接合2024
- Author(s)
  大橋勇介、倉林康太、和田武、加藤秀実
- Organizer
  日本金属学会2024年春期講演大会(第174回）
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] 金属溶湯脱成分法によるナノポーラスMXenesの作製2024
- Author(s)
  劉方舟、加藤秀実、和田武
- Organizer
  日本金属学会2024年春期講演大会(第174回）
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] 固相デアロイングを利用したFe-Mg継手の強度に及ぼすFe100-xNix中間層厚さおよびNi濃度xの影響2024
- Author(s)
  倉林康太、和田武、加藤秀実
- Organizer
  日本金属学会2024年春期講演大会(第174回）
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] 金属溶湯脱成分法を応用した非混和性純Ti/純Mgの機械的接合2024
- Author(s)
  大橋勇介、倉林康太、和田武、加藤秀実
- Organizer
  六研連携プロジェクト公開討論会
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] 固相デアロイングを利用した Fe-Mg 継手の強度に及ぼすFe100-xNix中間層厚さおよび Ni 濃度xの影響2024
- Author(s)
  倉林康太、和田武、加藤秀実
- Organizer
  六研連携プロジェクト公開討論会
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] 金属溶湯脱成分法を応用した非混和性純Ti/純Mgの機械的接合2024
- Author(s)
  大橋勇介、倉林康太、和田武、加藤秀実
- Organizer
  六研連携プロジェクト公開討論会
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] 固相デアロイングを利用したFe-Mg継手の強度に及ぼすFe100-xNix中間層厚さおよびNi濃度xの影響2024
- Author(s)
  倉林康太、和田武、加藤秀実
- Organizer
  日本金属学会2024年春期講演大会(第174回）
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] 固相デアロイングを利用した Fe-Mg 継手の強度に及ぼすFe100-xNix中間層厚さおよび Ni 濃度xの影響2024
- Author(s)
  倉林康太、和田武、加藤秀実
- Organizer
  六研連携プロジェクト公開討論会
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] 金属溶湯脱成分法を応用した非混和性純Ti/純Mgの機械的接合2024
- Author(s)
  大橋勇介、倉林康太、和田武、加藤秀実
- Organizer
  日本金属学会2024年春期講演大会(第174回）
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] Ti-Mg人工共晶組織の形成とその異種材料接合への応用2023
- Author(s)
  大橋勇介、山田類、和田武、加藤秀実
- Organizer
  日本金属学会2023年秋期講演大会(第173回）
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Discussion of High Entropy Effect on Ligament Growth in Nanoporous TiVNbMoTa Alloy2023
- Author(s)
  Akira Nakata, Takeshi Wada, Hidemi Kato
- Organizer
  新学術領域研究「ハイエントロピー合金」国際ワークショップ
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 金属溶湯脱成分法を応用した純チタンー純マグネシウム接合における界面組織と接合強度の関係2023
- Author(s)
  大橋勇介、倉林康太、和田武、加藤秀実
- Organizer
  日本金属学会2023年春期講演大会
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Discussion of High Entropy Effect on Ligament Growth in Nanoporous TiVNbMoTa Alloy2023
- Author(s)
  Akira Nakata, Takeshi Wada, Hidemi Kato
- Organizer
  新学術領域研究「ハイエントロピー合金」国際ワークショップ
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Elaboration of nano-porous powders by liquid metal dealloying2023
- Author(s)
  Louis LESAGE, Pierre-Antoine GESLIN, Nicolas MARY, Christophe LE BOURLOT, Eric MAIRE, Takeshi WADA, Hidemi KATO
- Organizer
  Fourth International Symposium on Nanoporous Materials by Alloy Corrosion
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] 金属溶湯脱成分技術を応用した純チタンー純マグネシウム接合2023
- Author(s)
  大橋勇介、倉林康太、和田武、加藤秀実
- Organizer
  六研連携プロジェクト公開討論会
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] 金属溶湯脱成分法を用いたナノポーラス材料の開発2023
- Author(s)
  加藤秀実
- Organizer
  粉体粉末冶金協会　2023年度秋季大会(第132回講演大会)
- Invited
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Temperature dependence of phase evolution in ligaments effects on fabricating nanoporous Fe7Mo6 intermetallic compounds by liquid metal dealloying2023
- Author(s)
  Ruirui SONG, Takeshi WADA, Hidemi KATO
- Organizer
  日本金属学会2023年秋期講演大会(第173回）
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] Decoupling between thermodynamic and dynamic glass transition in high entropy metallic glasses2023
- Author(s)
  Hidemi Kato
- Organizer
  The 9th International Discussion Meeting on Relaxations in Complex Systems (9 IDMRCS)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-WRAPUP-23H05419
[Presentation] Partial liquid metal dealloying to synthesize nickel-containing nanoporous alloys2023
- Author(s)
  Takeshi Wada, Pierre-Antoine Geslin, Daixu Wei, Hidemi Kato
- Organizer
  Fourth International Symposium on Nanoporous Materials by Alloy Corrosion
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] 金属溶湯脱成分法を用いた金属の共連続ナノポー―ラス化と電解コンデンサへの応用2023
- Author(s)
  加藤秀実
- Organizer
  電気化学会第90回大会
- Invited
- Data Source
  KAKENHI-WRAPUP-23H05419
[Presentation] 部分脱成分法を用いたポーラスNiMo合金の作製およびその水素発生触媒への応用2023
- Author(s)
  三鍋雄紀、和田武、加藤秀実
- Organizer
  日本金属学会2023年秋期講演大会(第173回）
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] 共連続オープンポーラス表面層を付与した結晶金属と金属ガラス過冷却液体の含浸接合2023
- Author(s)
  前川優太、大橋勇介、山田類、和田武、加藤秀実
- Organizer
  日本金属学会2023年秋期講演大会(第173回）
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] Decoupling between Thermodynamic and Dynamical Glass Transitions in High-entropy Metallic Glasses2023
- Author(s)
  Jing Jiang, Takeshi Wada, Hidemi Kato
- Organizer
  新学術領域研究「ハイエントロピー合金」国際ワークショップ
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分法を用いた金属の共連続ナノポーラス化と電解コンデンサへの応用2023
- Author(s)
  加藤秀実
- Organizer
  電気化学会第90 回大会
- Invited
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Dissimilar Joining using Dealloying2023
- Author(s)
  加藤秀実
- Organizer
  2023 MRS Fall Meeting & Exhibit
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Immiscible Mg-Ti Bonding with Liquid Metal Dealloying Method2023
- Author(s)
  Yusuke Ohashi, Kota Kurabayashi, Takeshi Wada, Hidemi Kato
- Organizer
  Fourth International Symposium on Nanoporous Materials by Alloy Corrosion
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] Ti-Mg人工共晶組織の形成とその異種材料接合への応用2023
- Author(s)
  大橋勇介、山田類、和田武、加藤秀実
- Organizer
  日本金属学会2023年秋期講演大会(第173回）
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] Discussion on High Entropy Effect on Ligament Growth in Nanoporous TVNbMoTa Alloy2023
- Author(s)
  加藤秀実
- Organizer
  PRICM11（The 11th Pacific Rim International Conference on Advanced Materials and Processing）
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Ultrafine nanoporous intermetallic catalysts by high-temperature liquid metal dealloying for electrochemical hydrogen production2023
- Author(s)
  Ruirui Song, Jiuhui Han, Masayuki Okugawa, Rodion Belosludov, Takeshi Wada, Jing Jiang, Daixiu Wei, Akira Kudo, Yuan Tian, Mingwei Chen, Hidemi Kato
- Organizer
  Fourth International Symposium on Nanoporous Materials by Alloy Corrosion
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] Dissimilar Joining using Dealloying2023
- Author(s)
  Hidemi Kato, Kota Kurabayashi, Takeshi Wada
- Organizer
  2023 MRS Fall Meeting & Exhibit
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26398
[Presentation] 共連続オープンポーラス表面層を付与した結晶金属と金属ガラス過冷却液体の含浸接合2023
- Author(s)
  前川優太、大橋勇介、山田類、和田武、加藤秀実
- Organizer
  日本金属学会2023年秋期講演大会(第173回）
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] 高 Mn 鋼の強化機構に及ぼす変形温度の影響2023
- Author(s)
  加藤宏和, 黄錫永, 朴明験, 高斯, 辻伸泰
- Organizer
  日本金属学会2023年春期 (第172回) 講演大会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Decoupling between Thermodynamic and Dynamical Glass Transitions in High-entropy Metallic Glasses2023
- Author(s)
  Jing Jiang, Takeshi Wada, Hidemi Kato
- Organizer
  新学術領域研究「ハイエントロピー合金」国際ワークショップ
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Elaboration of micro-porous FeCrNi powders by liquid metal dealloying2022
- Author(s)
  Lesage Louis、Geslin Pierre-Antoine、Mary Nicolas、和田武、加藤秀実
- Organizer
  日本金属学会2022年秋期講演大会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Zr基金属ガラス過冷却液体の結晶化挙動に及ぼすハイエントロピー化の影響2022
- Author(s)
  太田佳介、和田武、ジャンジン、加藤秀実
- Organizer
  日本金属学会2022年秋期講演大会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分法におけるポーラス金属のハイエントロピー化が粗大化反応に及ぼす影響2022
- Author(s)
  仲田玲、和田武、加藤秀実
- Organizer
  第6回構造材料研究部会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Strengthening of high-entropy alloys via modulation of cryo-pre-straining-induced defects2022
- Author(s)
  Tang Bowen, Wei Daixiu, 加藤秀実
- Organizer
  日本材料学会　第8回材料WEEK「材料シンポジウム」
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Elaboration of micro-porous FeCrNi powders by liquid metal dealloying2022
- Author(s)
  Louis Lesage, Pierre-Antoine Geslin, Nicolas Mary, Eric Maire, Takeshi Wada, Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Elaboration of micro-porous FeCrNi powders by liquid metal dealloying2022
- Author(s)
  Lesage Louis、Geslin Pierre-Antoine、Mary Nicolas、和田武、加藤秀実
- Organizer
  第6回構造材料研究部会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Immiscible Mg-Ti Bonding with Liquid Metal Dealloying Technique2022
- Author(s)
  Yusuke Ohashi, Kota Kurabayashi, Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Elaboration of micro-porous FeCrNi powders by liquid metal dealloying2022
- Author(s)
  Louis Lesage, Pierre-Antoine Geslin, Nicolas Mary, Eric Maire, Takeshi Wada, Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] デアロイングを利用した相分離系 Fe-Mg 接合2022
- Author(s)
  倉林康太、加藤秀実、和田武
- Organizer
  日本金属学会2022年秋期講演大会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Zr基金属ガラス過冷却液体の結晶化挙動に及ぼすハイエントロピー化の影響2022
- Author(s)
  太田佳介、和田武、ジャンジン、加藤秀実
- Organizer
  日本金属学会2022年秋期(第171回)講演大会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] High-entropy design and its influence on glass-forming ability in Zr-Cu-based metallic glass2022
- Author(s)
  Y. Ohashi, T. Wada, H. Kato
- Organizer
  The 18th International Conference on Liquid and Amorphous Metals (LAM18)
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] マルチスケール組織制御によるハイエントロピー合金の力学特性向上2022
- Author(s)
  魏代修、都留智仁、加藤秀実
- Organizer
  日本金属学会2022年秋期(第171回)講演大会
- Invited
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] ハイエントロピー金属ガラスのガラス形成能と動的機械的性質2022
- Author(s)
  和田武, 大橋勇介, ジャンジン, 加藤秀実
- Organizer
  日本金属学会2022年春期(第170回)講演大会
- Invited
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Strengthening of high-entropy alloys via modulation of cryo-pre-straining-induced defects2022
- Author(s)
  B. Tang, D. Wei, H. Kato
- Organizer
  第142回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] マルチスケール組織制御によるハイエントロピー合金の力学特性向上2022
- Author(s)
  魏代修、都留智仁、加藤秀実
- Organizer
  日本金属学会2022年秋期講演大会
- Invited
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分法におけるポーラス金属のハイエントロピー化が粗大化反応に及ぼす影響2022
- Author(s)
  仲田玲、和田武、加藤秀実
- Organizer
  日本金属学会2022年秋期(第171回)講演大会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Ultrafine Porous Intermetallic Compounds by High-Temperature Liquid Metal Dealloying for Electrochemical Hydrogen Production2022
- Author(s)
  Ruirui Song, Jiuhui Han, Masayuki Okugawa, Rodion Belosludov, Takeshi Wada, Jing Jiang, Daixiu Wei, Akira Kudo, Yuan Tian, Mingwei Chen & Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Decoupling between thermodynamic and dynamical glass transitions in high-entropy metallic glasses2022
- Author(s)
  T.Wada, J.Jiang, H.Kato
- Organizer
  The 18th International Conference on Liquid and Amorphous Metals (LAM18)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 超微細粒高Mn鋼におけるリューダース変形の詳細2022
- Author(s)
  加藤宏和，Hwang Sukyoung，辻伸泰
- Organizer
  日本金属学会2022年春期講演大会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 酸化亜鉛ナノ構造基板の作製と光触媒水分解による水素製造2022
- Author(s)
  加藤輝人, Marwa Abouelela, Tan Wai Kian, 武藤浩行, 松田厚範, 河村剛
- Organizer
  2022年度日本セラミックス協会東海支部学術研究発表会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Strengthening of high-entropy alloys via modulation of cryo-pre-straining-induced defects2022
- Author(s)
  Bowen Tang, Daixiu Wei, Wu Gong, Liqiang Wang, Takuro Kawasaki, Stefanus Harjo, Hidemi Kato
- Organizer
  第21回日本金属学会東北支部研究発表大会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Decoupling between thermodynamic and dynamical glass transitions in high-entropy metallic glasses2022
- Author(s)
  T.Wada, J.Jiang, H. Kato
- Organizer
  The 18th International Conference on Liquid and Amorphous Metals (LAM18)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Ultrafine Porous Intermetallic Compounds Fabricated by High-Temperature Liquid Metal Dealloying for Electrochemical Hydrogen Production2022
- Author(s)
  Ruirui Song, Jiuhui Han, Masayuki Okugawa, Rodion Belosludov, Takeshi Wada, Jing Jiang, Daixiu Wei, Akira Kudo, Yuan Tian, Mingwei Chen & Hidemi Kato
- Organizer
  先端エネルギー材料理工共創研究センター(E-IMR) 2022年度ワークショップ
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Ultrafine Porous Intermetallic Compounds by High-Temperature Liquid Metal Dealloying for Electrochemical Hydrogen Production2022
- Author(s)
  Song Ruirui, Han Jiuhui, Okugawa Masayuki, Belosludov Rodion, Wada Takeshi, Jiang Jing, Wei Daixiu, Kudo Akira, Tian Yuan, Chen Mingwei, Kato Hidemi
- Organizer
  第21回　日本金属学会東北支部研究発表大会
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] デアロイングを利用した相分離系 Fe-Mg 接合2022
- Author(s)
  倉林康太、加藤秀実、和田武
- Organizer
  第6回構造材料研究部会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Elaboration of micro-porous FeCrNi powders by liquid metal dealloying2022
- Author(s)
  Lesage Louis、Geslin Pierre-Antoine、Mary Nicolas、和田武、加藤秀実
- Organizer
  日本金属学会2022年秋期(第171回)講演大会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Liquid Metal Dealloying for Functional/Structural Materials2022
- Author(s)
  Ruirui Song, YeonBeom Jeong, and Hidemi Kato
- Organizer
  he 17th International Symposium on Novel and Nano Materials(ISNNM)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] 金属溶湯脱成分法におけるポーラス金属のハイエントロピー化が粗大化反応に及ぼす影響2022
- Author(s)
  仲田玲、和田武、加藤秀実
- Organizer
  第6回構造材料研究部会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Liquid Metal Dealloying for Functional/Structural Materials2022
- Author(s)
  Ruirui Song, YeonBeom Jeong, and Hidemi Kato
- Organizer
  The 17th International Symposium on Novel and Nano Materials(ISNNM)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分法におけるポーラス金属のハイエントロピー化が粗大化反応に及ぼす影響2022
- Author(s)
  仲田玲、和田武、加藤秀実
- Organizer
  日本金属学会2022年秋期講演大会
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] 金属溶湯脱成分法におけるポーラス金属のハイエントロピー化が粗大化反応に及ぼす影響2022
- Author(s)
  仲田玲、和田武、加藤秀実
- Organizer
  日本金属学会２０２２年秋季講演大会
- Data Source
  KAKENHI-PROJECT-20K05126
[Presentation] Ultrafine Porous Intermetallic Compounds Fabricated by High-Temperature Liquid Metal Dealloying for Electrochemical Hydrogen Production2022
- Author(s)
  Ruirui Song, Jiuhui Han, Masayuki Okugawa, Rodion Belosludov, Takeshi Wada, Jing Jiang, Daixiu Wei, Akira Kudo, Yuan Tian, Mingwei Chen & Hidemi Kato
- Organizer
  先端エネルギー材料理工共創研究センター(E-IMR) 2022年度ワークショップ
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Ultrafine Porous Intermetallic Compounds by High-Temperature Liquid Metal Dealloying for Electrochemical Hydrogen Production2022
- Author(s)
  Ruirui Song, Jiuhui Han, Masayuki Okugawa, Rodion Belosludov, Takeshi Wada, Jing Jiang, Daixiu Wei, Akira Kudo, Yuan Tian, Mingwei Chen & Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Immiscible Fe/Mg joining using liquid metal dealloying reaction2022
- Author(s)
  Kota Kurabayashi, Takeshi Wada, Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Immiscible Mg-Ti Bonding with Liquid Metal Dealloying Technique2022
- Author(s)
  Yusuke Ohashi, Kota Kurabayashi, Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Fabrication of bicontinuous porous intermetallic Fe-Al compounds by liquid metal dealloying2022
- Author(s)
  Pengfei Zhu, Takeshi Wada, Hidemi Kato
- Organizer
  第142回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 金属溶湯脱成分法におけるポーラス金属のハイエントロピー化が粗大化反応に及ぼす影響2022
- Author(s)
  仲田玲、和田武、加藤秀実
- Organizer
  日本金属学会2022年秋期講演大会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 高Mn 鋼の室温～300℃における変形挙動2022
- Author(s)
  加藤宏和, 黄錫永, 朴明験, Gao Si, 辻伸泰
- Organizer
  日本金属学会2022年度「高温材料の変形と破壊」研究会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Ultrafine Porous Intermetallic Compounds by High-Temperature Liquid Metal Dealloying for Electrochemical Hydrogen Production2022
- Author(s)
  Ruirui Song, Jiuhui Han, Masayuki Okugawa, Rodion Belosludov, Takeshi Wada, Jing Jiang, Daixiu Wei, Akira Kudo, Yuan Tian, Mingwei Chen & Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] デアロイングを利用した相分離系 Fe-Mg 接合2022
- Author(s)
  倉林康太、加藤秀実、和田武
- Organizer
  第6回構造材料研究部会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Immiscible Fe/Mg joining using liquid metal dealloying reaction2022
- Author(s)
  Kota Kurabayashi, Takeshi Wada, Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Fabrication of bicontinuous porous intermetallic Fe-Al compounds by liquid metal dealloying2022
- Author(s)
  Pengfei Zhu, Takeshi Wada, Hidemi Kato
- Organizer
  第142回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 液体急冷を通じたAl-Si系共晶合金の非平衡凝固2022
- Author(s)
  Tang Bowen, Wei Daixiu, 加藤秀実
- Organizer
  日本材料学会　第8回材料WEEK「材料シンポジウム」
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Elaboration of micro-porous FeCrNi powders by liquid metal dealloying2022
- Author(s)
  Lesage Louis、Geslin Pierre-Antoine、Mary Nicolas、和田武、加藤秀実
- Organizer
  第6回構造材料研究部会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 液体急冷を通じたAl-Si系共晶合金の非平衡凝固2022
- Author(s)
  山田類、岡田純平、和田武、才田淳治、加藤秀実
- Organizer
  日本材料学会　第8回材料WEEK「材料シンポジウム」
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Liquid Metal Dealloying for Functional/Structural Materials2022
- Author(s)
  Ruirui Song, YeonBeom Jeong, and Hidemi Kato
- Organizer
  The 17th International Symposium on Novel and Nano Materials(ISNNM)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Strengthening of high-entropy alloys via modulation of cryo-pre-straining-induced defects2022
- Author(s)
  B. Tang, D. Wei, H. Kato
- Organizer
  第142回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Ultrafine Porous Intermetallic Compounds by High-Temperature Liquid Metal Dealloying for Electrochemical Hydrogen Production2022
- Author(s)
  Song Ruirui, Han Jiuhui, Okugawa Masayuki, Belosludov Rodion, Wada Takeshi, Jiang Jing, Wei Daixiu, Kudo Akira, Tian Yuan, Chen Mingwei, Kato Hidemi
- Organizer
  第21回日本金属学会東北支部研究発表大会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] デアロイングを利用した相分離系 Fe-Mg 接合2022
- Author(s)
  倉林康太、加藤秀実、和田武
- Organizer
  日本金属学会2022年秋期(第171回)講演大会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Mechanically robust self-organized crack-free nanocellullar graphene prepared by Liquid Metal Dealloying2022
- Author(s)
  仲田玲、和田武、加藤秀実
- Organizer
  先端エネルギー材料理工共創研究センター(E-IMR) 2022年度ワークショップ
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Immiscible Fe/Mg joining using liquid metal dealloying reaction2022
- Author(s)
  Kota Kurabayashi, Takeshi Wada, Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Immiscible Mg-Ti Bonding with Liquid Metal Dealloying Technique2022
- Author(s)
  Yusuke Ohashi, Kota Kurabayashi, Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分法におけるポーラス金属のハイエントロピー化が粗大化反応に及ぼす影響2022
- Author(s)
  仲田玲、和田武、加藤秀実
- Organizer
  第143回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] High-entropy design and its influence on glass-forming ability in Zr-Cu-based metallic glass2022
- Author(s)
  Y. Ohashi, T. Wada, H. Kato
- Organizer
  The 18th International Conference on Liquid and Amorphous Metals (LAM18)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Ultrafine Porous Intermetallic Compounds by High-Temperature Liquid Metal Dealloying for Electrochemical Hydrogen Production2022
- Author(s)
  Song Ruirui, Han Jiuhui, Okugawa Masayuki, Belosludov Rodion, Wada Takeshi, Jiang Jing, Wei Daixiu, Kudo Akira, Tian Yuan, Chen Mingwei, Kato Hidemi,
- Organizer
  第21回日本金属学会東北支部研究発表大会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Elaboration of micro-porous FeCrNi powders by liquid metal dealloying2022
- Author(s)
  Lesage Louis、Geslin Pierre-Antoine、Mary Nicolas、和田武、加藤秀実
- Organizer
  日本金属学会2022年秋期講演大会
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Mechanically robust self-organized crack-free nanocellullar graphene prepared by Liquid Metal Dealloying2022
- Author(s)
  加藤秀実
- Organizer
  先端エネルギー材料理工共創研究センター(E-IMR) 2022年度ワークショップ
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Strengthening of high-entropy alloys via modulation of cryo-pre-straining-induced defects2022
- Author(s)
  Bowen Tang, Daixiu Wei, Wu Gong, Liqiang Wang, Takuro Kawasaki, Stefanus Harjo, Hidemi Kato
- Organizer
  第21回日本金属学会東北支部研究発表大会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] デアロイングを利用した相分離系 Fe-Mg 接合2022
- Author(s)
  倉林康太、加藤秀実、和田武
- Organizer
  日本金属学会2022年秋期講演大会
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Elaboration of micro-porous FeCrNi powders by liquid metal dealloying2022
- Author(s)
  Louis Lesage, Pierre-Antoine Geslin, Nicolas Mary, Eric Maire, Takeshi Wada, Hidemi Kato
- Organizer
  The 2nd International Symposium on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Fabrication of porous metals by Liquid metal dealloying2021
- Author(s)
  T. Wada, H. Kato
- Organizer
  Nanoporous Materials by Alloy Corrosion
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Beating Thermal Coarsening in Nanoporous Materials via High-Entropy Design2021
- Author(s)
  T. Wada, S.-H. Joo, H. Kato
- Organizer
  LyonSE&N & ELyT workshop 2021
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloy2021
- Author(s)
  J. Jiang, H. Kato, D. Louzguine
- Organizer
  THERMEC’ 2021
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 金属液体中の脱成分現象を応用した医療用金属材料の開発2021
- Author(s)
  加藤秀実
- Organizer
  ３大学医工連携オンラインセミナー～メタマテリアル・革新的センサー・基礎代謝測定・医療用金属材料
- Invited
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯中におけるポーラス FeCr リガメント粗大化の溶湯成分依存性2021
- Author(s)
  黒岩優太、和田武、加藤秀実
- Organizer
  第141回金属材料研究所講演会
- Data Source
  KAKENHI-PROJECT-20K05126
[Presentation] 金属溶湯中におけるポーラス FeCr リガメント粗大化の溶湯成分依存性2021
- Author(s)
  黒岩優太, 和田武, 加藤秀実
- Organizer
  第141回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Zr-Cu-基バルク金属ガラスのハイエントロピー化がガラス形成能・結晶化・フラジリティに及ぼす影響2021
- Author(s)
  大橋勇介, 和田武, 加藤秀実
- Organizer
  第4回構造材料研究部会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] ナノ結晶ハイエントロピー合金薄膜の作製とその結晶粒成長の評価2021
- Author(s)
  野崎翔吾, 魏代修, 和田武, 加藤秀実
- Organizer
  第141回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Decoupling between thermodynamic and dynamical glass transitions in high-entropy metallic glasses2021
- Author(s)
  J. Jiang, Z. Lu, T. Wada, H. Kato
- Organizer
  第140回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] ナノ結晶ハイエントロピー合金薄膜の作製とその結晶粒成長の評価2021
- Author(s)
  野崎翔吾，魏代修，和田武，加藤秀実
- Organizer
  第141回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯中におけるポーラス FeCr リガメント粗大化の溶湯成分依存性2021
- Author(s)
  黒岩優太、和田武、加藤秀実
- Organizer
  第141回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Fabrication of porous metals by Liquid metal dealloying2021
- Author(s)
  T. Wada, H. Kato
- Organizer
  Nanoporous Materials by Alloy Corrosion
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Decoupling between thermodynamic and dynamical glass transitions in high-entropy metallic glasses2021
- Author(s)
  Jing Jiang, Zhen Lu, Takeshi Wada, Hidemi Kato
- Organizer
  第140回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Nanoporous Mo-M Alloys Fabricated by Liquid Metal Dealloying for Efficient Hydrogen Evolution Electrocatalysts2021
- Author(s)
  R. Song, J. Han, M. Okugawa, T. Wada, H. Kato
- Organizer
  第141回金属材料研究所講演会
- Data Source
  KAKENHI-PROJECT-20K05126
[Presentation] Intermetallic Effect” on Ligament Coarsening during Liquid Metal Dealloying2021
- Author(s)
  Ruirui Song, Jiuhui Han, Masayuki Okugawa, Takeshi Wada, Hidemi Kato
- Organizer
  第4回構造材料研究部会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分におけるポーラス構造粗大化の金属溶湯依存性解明2021
- Author(s)
  黒岩優太、和田武、加藤秀実
- Organizer
  日本金属学会2021年秋期講演大会(第169回）
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Zr 基金属ガラス過冷却液体の結晶化挙動に及ぼすハイエントロピー化の影響2021
- Author(s)
  太田桂介，Jing Jiang，和田武，加藤秀実
- Organizer
  第141回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] “Intermetallic Effect” on Ligament Coarsening during Liquid Metal Dealloying2021
- Author(s)
  Ruirui Song, Jiuhui Han, Masayuki Okugawa, Takeshi Wada, Hidemi Kato
- Organizer
  日本金属学会2021年秋期講演大会(第169回）
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Zr-Cu-基バルク金属ガラスのハイエントロピー化がガラス形成能・結晶化・フラジリティに及ぼす影響2021
- Author(s)
  大橋勇介、和田武、加藤秀実
- Organizer
  第4回構造材料研究部会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] “Intermetallic Effect” on Ligament Coarsening during Liquid Metal Dealloying2021
- Author(s)
  R. Song, J. Han, M. Okugawa, T. Wada, H. Kato
- Organizer
  第4回構造材料研究部会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Decoupling between thermodynamic and dynamical glass transitions in high-entropy metallic glasses2021
- Author(s)
  Jing JIANG、Hidemi Kato
- Organizer
  粉体粉末冶金協会2021年度秋季大会（第128回講演大会）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 脱成分法を用いたチタンの共連続ポーラスおよび複合材料化2021
- Author(s)
  加藤秀実
- Organizer
  日本鉄鋼協会令和2年度チタンフォーラム第１回研究発表会、良好な地球環境を継続的に維持するためのチタンとその合金の開発～チタン系ハイエントロピー合金の現状と展望～
- Invited
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] ハイエントロピー金属ガラスのガラス形成能と動力学的性質2021
- Author(s)
  和田武、大橋勇介、ジャンジン、加藤秀実
- Organizer
  公益社団法人日本セラミックス協会第 34 回秋季シンポジウム
- Invited
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Zr-Cu基ハイエントロピー金属ガラスのガラス形成能に対する熱力学および速度論的考察", 日本材料学会「材料シンポジウム2021
- Author(s)
  大橋勇介、和田武、加藤秀実
- Organizer
  日本材料学会「材料シンポジウム」第7回材料WEEK
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属液体中の脱成分現象を応用した医療用金属材料の開発2021
- Author(s)
  加藤秀実
- Organizer
  ３大学医工連携オンラインセミナー～メタマテリアル・革新的センサー・基礎代謝測定・医療用金属材料
- Invited
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] ハイエントロピー金属ガラスのガラス形成能と動力学的性質2021
- Author(s)
  和田武, 大橋勇介, ジャンジン, 加藤秀実
- Organizer
  公益社団法人日本セラミックス協会第 34 回秋季シンポジウム
- Invited
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Fabrication of High Strength Mg and FeCr Heterostructure Composite beyond Rule of Mixture2021
- Author(s)
  Yeon Beom JEONG, Takeshi Wada, Soo-Hyun Joo, Ki Buem Kim, Jeong-Min Park, Hyoung Seop Kim, Hidemi Kato
- Organizer
  日本金属学会2021年春期講演大会
- Data Source
  KAKENHI-PROJECT-20K05126
[Presentation] Nanoporous Mo-M Alloys Fabricated by Liquid Metal Dealloying for Efficient Hydrogen Evolution Electrocatalysts2021
- Author(s)
  R. Song, J. Han, M. Okugawa, T. Wada, H. Kato
- Organizer
  第141回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Development of high performance non-equiatomic high entropy alloys2021
- Author(s)
  D. Wei, T. Tsuru, N.L. Okamoto, T. Ichitsubo, H. Kato
- Organizer
  第140回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 金属溶湯脱成分におけるポーラス構造粗大化の金属溶湯依存性解明2021
- Author(s)
  黒岩優太, 和田武, 加藤秀実
- Organizer
  日本金属学会2021年秋期(第169回)講演大会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Beating Thermal Coarsening in Nanoporous Materials via High-Entropy Design2021
- Author(s)
  T. Wada, S.-H. Joo, H. Kato,
- Organizer
  LyonSE&N & ELyT workshop 2021 / JSPS Core to core 1st symposium
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Fabrication of porous metals by Liquid metal dealloying2021
- Author(s)
  T. Wada, H. Kato
- Organizer
  Nanoporous Materials by Alloy Corrosion
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] Beating Thermal Coarsening in Nanoporous Materials via High-Entropy Design2021
- Author(s)
  T. Wada, S.-H. Joo, H. Kato
- Organizer
  LyonSE&N & ELyT workshop 2021 / JSPS Core to core 1st symposium
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] 金属溶湯脱成分におけるポーラス構造粗大化の金属溶湯依存性解明2021
- Author(s)
  黒岩優太、和田武、加藤秀実
- Organizer
  第4回構造材料研究部会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Synthesis and Thermal Imprint Ability of Nanocrystalline High Entropy Alloy Ribbon2021
- Author(s)
  S. Nozaki, D. Wei, T. Wada, H. Kato
- Organizer
  SMS2022 and GIMRT user meeting 2022
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Isothermal and non-isothermal crystallization kinetics of Zr35Hf13Al11Ag8Ni8Cu25 Highentropy metallic glass2021
- Author(s)
  Y. Ohashi, R. Yamada, T. Wada, H. Kato
- Organizer
  SMS2022 and GIMRT user meeting 2022
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Liquid Metal Dealloying Toward Nanoporous Mo-Based Intermetallic Compounds for Efficient Hydrogen Production2021
- Author(s)
  R. Song, J. Han, M. Okugawa, T. Wada, H. Kato
- Organizer
  2021 MRS Fall Meeting & Exhibit
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Pd20Pt20Ni20Cu20P20ハイエントロピー金属ガラスのガラス形成能に対する熱力学・速度論的考察2021
- Author(s)
  大橋勇介、和田武、加藤秀実
- Organizer
  粉体粉末冶金協会2021年度秋季大会（第128回講演大会）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Decoupling between thermodynamic and dynamical glass transitions in high-entropy metallic glasses2021
- Author(s)
  J. JIANG, H. Kato
- Organizer
  粉体粉末冶金協会2021年度秋季大会（第128回講演大会）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 金属溶湯脱成分におけるポーラス構造粗大化の金属溶湯依存性解明2021
- Author(s)
  黒岩優太, 和田武, 加藤秀実
- Organizer
  第4回構造材料研究部会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Pd20Pt20Ni20Cu20P20ハイエントロピー金属ガラスのガラス形成能に対する熱力学・速度論的考察2021
- Author(s)
  大橋勇介, 和田武, 加藤秀実
- Organizer
  粉体粉末冶金協会2021年度秋季大会（第128回講演大会）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] ハイエントロピー金属ガラスのガラス形成能と動的機械的性質2021
- Author(s)
  和田　武、大橋　勇介、ジャン　ジン、加藤　秀実
- Organizer
  日本金属学会2022年春期講演大会(第170回）
- Invited
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Zr-Cu-基バルク金属ガラスのハイエントロピー化がガラス形成能・結晶化・フラジリティに及ぼす影響2021
- Author(s)
  大橋勇介, 和田武, 加藤秀実
- Organizer
  日本金属学会2021年秋期(第169回)講演大会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] “Intermetallic Effect” on Ligament Coarsening during Liquid Metal Dealloyin2021
- Author(s)
  R. Song, J. Han, M. Okugawa, T. Wada, H. Kato
- Organizer
  日本金属学会2021年秋期(第169回)講演大会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Zr 基金属ガラス過冷却液体の結晶化挙動に及ぼすハイエントロピー化の影響2021
- Author(s)
  太田桂介, Jing Jiang, 和田武, 加藤秀実
- Organizer
  第141回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloy2021
- Author(s)
  Jing Jiang, Hidemi Kato, Dmitri Louzguine
- Organizer
  Thermec'2021
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Zr-Cu-基バルク金属ガラスのハイエントロピー化がガラス形成能・結晶化・フラジリティに及ぼす影響2021
- Author(s)
  大橋勇介、和田武、加藤秀実
- Organizer
  日本金属学会2021年秋期講演大会(第169回）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分におけるポーラス構造粗大化の金属溶湯依存性解明2021
- Author(s)
  黒岩優太、和田武、加藤秀実
- Organizer
  日本金属学会2021年秋期講演大会(第169回)
- Data Source
  KAKENHI-PROJECT-20K05126
[Presentation] CoCrCuFeNiハイエントロピー合金の耐食性に及ぼすCuの影響解析2021
- Author(s)
  加藤優, 武藤泉, 菅原優
- Organizer
  日本金属学会2021年春期
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Liquid Metal Dealloying Toward Nanoporous Mo-Based Intermetallic Compounds for Efficient Hydrogen Production2021
- Author(s)
  R. Song, J. Han, M. Okugawa, T. Wada, H. Kato
- Organizer
  2021 MRS Fall Meeting & Exhibit
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分におけるポーラス構造粗大化の金属溶湯依存性解明2021
- Author(s)
  黒岩優太、和田武、加藤秀実
- Organizer
  日本金属学会2021年秋期講演大会(第169回）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] ハイエントロピー合金における塑性変形挙動の温度依存性2021
- Author(s)
  魏代修, 加藤秀実
- Organizer
  粉体粉末冶金協会2021年度秋季大会（第128回講演大会）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Zr-Cu基ハイエントロピー金属ガラスのガラス形成能に対する熱力学および速度論的考察2021
- Author(s)
  大橋勇介, 和田武, 加藤秀実
- Organizer
  日本材料学会「材料シンポジウム」第7回材料WEEK
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 金属液体中の脱成分現象を応用した医療用金属材料の開発2021
- Author(s)
  加藤秀実
- Organizer
  ３大学医工連携オンラインセミナー～メタマテリアル・革新的センサー・基礎代謝測定・医療用金属材料
- Invited
- Data Source
  KAKENHI-PROJECT-21H04611
[Presentation] “Intermetallic Effect” on Ligament Coarsening during Liquid Metal Dealloying2021
- Author(s)
  Ruirui Song, Jiuhui Han, Masayuki Okugawa, Takeshi Wada, Hidemi Kato
- Organizer
  日本金属学会2021年秋期講演大会(第169回）
- Data Source
  KAKENHI-PROJECT-20K05126
[Presentation] ハイエントロピー金属ガラスのガラス形成能と動的機械的性質2021
- Author(s)
  和田　武、大橋　勇介、ジャン　ジン、加藤　秀実
- Organizer
  日本金属学会2022年春期講演大会(第170回）
- Invited
- Data Source
  KAKENHI-PROJECT-20K05126
[Presentation] 第一原理計算によるハイエントロピー合金の諸特性の評価2021
- Author(s)
  都留智仁, イバンロブゼンコ, 椎原良典, 魏代修, 弓削是貴, 青柳吉輝, 下川智嗣, 久保百司, 尾方成信, 加藤秀実, 橋本直幸, 上田幹人, 林重成, 岡弘, 礒部繁人
- Organizer
  日本金属学会2021年秋期（第169回）講演大会
- Invited
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Nanoporous Mo-M Alloys Fabricated by Liquid Metal Dealloying for Efficient Hydrogen Evolution Electrocatalysts2021
- Author(s)
  R. Song, J. Han, M. Okugawa, T. Wada, H. Kato
- Organizer
  第141回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分による階層構造ポーラス金属の作製と形態制御2021
- Author(s)
  佐藤俊太郎、和田武、加藤秀実
- Organizer
  日本金属学会2021年春期講演大会
- Data Source
  KAKENHI-PROJECT-20K05126
[Presentation] Fabrication of porous metals by Liquid metal dealloying2021
- Author(s)
  T. Wada, H. Kato
- Organizer
  Nanoporous Materials by Alloy Corrosion
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K05126
[Presentation] Intermetallic Effect” on Ligament Coarsening during Liquid Metal Dealloyin2021
- Author(s)
  Ruirui Song, Jiuhui Han, Masayuki Okugawa, Takeshi Wada, Hidemi Kato
- Organizer
  日本金属学会2021年秋期講演大会(第169回）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] ハイエントロピー合金における塑性変形挙動の温度依存性2021
- Author(s)
  魏代修、加藤秀実
- Organizer
  粉体粉末冶金協会2021年度秋季大会（第128回講演大会）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Development of high performance non-equiatomic high entropy alloys2021
- Author(s)
  Daixiu Wei, Tomohito Tsuru, Norihiko L. Okamoto, Tetsu Ichitsubo, Hidemi Kato
- Organizer
  第140回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Effect of Minor Elements Addition on Microstructure and Mechanical Properties of Ti-Fe Hypereutectic Alloy2020
- Author(s)
  Yeon Beom JEONG, Hidemi KATO
- Organizer
  The 4th Symposium for The Core Research Cluster for Materials Science and the 3rd Symposium on International Joint Graduate Program in Materials Science
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 金属溶湯脱成分法による L10-FeNi 規則合金作製の試み2020
- Author(s)
  中村祐、加藤秀実、和田武、S. H. Joo,
- Organizer
  第139回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Effect of Minor Elements Addition on Microstructure and Mechanical Properties of Ti-Fe Hypereutectic Alloy2020
- Author(s)
  Yeon Beom JEONG, Hidemi KATO
- Organizer
  The 3rd Symposium on International Joint Graduate Program in Materials Science “Create New Value of Materials Science through Broad Collaboration
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloy2020
- Author(s)
  Jing JIANG, Takeshi WADA, Hidemi KATO
- Organizer
  International Joint Symposium 2020
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloy2020
- Author(s)
  Jing JIANG, Takeshi WADA, Hidemi KATO
- Organizer
  The 15th International Workshop on Biomaterials in Interface Science
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分法を用いたポーラス金属粉末の開発2020
- Author(s)
  和田武、加藤秀実
- Organizer
  粉体粉末冶金協会2020年度秋季大会(第126回講演大会)
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 金属溶湯脱成分法を用いたポーラス金属粉末の開発2020
- Author(s)
  和田武、加藤秀実
- Organizer
  粉体粉末冶金協会　2020年度秋期大会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属液体中での脱成分現象を利用したポーラス炭素薄膜の作製とその特性2020
- Author(s)
  加藤秀実、朴元永
- Organizer
  化学系学協会東北大会
- Invited
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 脱成分法を用いたチタンの共連続ポーラスおよび複合材料化2020
- Author(s)
  加藤秀実
- Organizer
  日本鉄鋼協会令和2年度チタンフォーラム第１回研究発表会
- Invited
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分法による L10-FeNi 規則合金作製の試み2020
- Author(s)
  中村祐，加藤秀実，和田武，S. H. Joo
- Organizer
  第139回金属材料研究所講演会
- Data Source
  KAKENHI-PROJECT-20K05126
[Presentation] Nanostructure Optimization in Fe-based amorphous/nanocrystalline Soft Magnetic Alloys by Cryogenic Thermal Cyclic Process2020
- Author(s)
  Ruiming Chen, Jing Jiang, Kunio Yubuta, Hidemi Kato
- Organizer
  第139回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Nanostructure Optimization in Fe-based amorphous/nanocrystalline Soft Magnetic Alloys by Cryogenic Thermal Cyclic Process2020
- Author(s)
  Ruiming Chen, Jing Jiang, Kunio Yubuta, Hidemi Kato
- Organizer
  第139回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Microstructure study of Fe-based BMG reinforced with Al2O3 obtained by Spark Plasma Sintering2020
- Author(s)
  L. Zarazua, N. Mary, K. Ogawa, H. Kato
- Organizer
  Annual ELyTGlobal Workshop (11th)
- Data Source
  KAKENHI-PROJECT-19K05092
[Presentation] ハイエントロピー効果に基づく新材料と新機能の探査2020
- Author(s)
  加藤秀実、武藤泉、武藤浩行、西山宜正、和田武、竹内章
- Organizer
  日本金属学会2020年秋期講演大会
- Invited
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分法を用いたポーラス金属粉末の開発2020
- Author(s)
  和田武、加藤秀実
- Organizer
  粉体粉末冶金協会　2020年度秋季大会(第126回講演大会)
- Data Source
  KAKENHI-PROJECT-20K05126
[Presentation] ハイエントロピー化がバルク金属ガラス形成に及ぼす影響の検討2020
- Author(s)
  大橋勇介、和田武、加藤秀実
- Organizer
  第139回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] ハイエントロピー化がバルク金属ガラス形成に及ぼす影響の検討2020
- Author(s)
  大橋勇介、和田武、加藤秀実
- Organizer
  第139回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Fabrication of 3D micro-patterned metallic glass by imprinting process and application to Li-ion battery (LIB) electrode2020
- Author(s)
  Rise TAKAGI, Takeshi WADA, Hidemi KATO
- Organizer
  The 3rd Symposium on International Joint Graduate Program in Materials Science “Create New Value of Materials Science through Broad Collaboration
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Preparation of nanoporous metals by liquid metal dealloying (LMD)2020
- Author(s)
  Takeshi WADA, Hidemi KATO
- Organizer
  Summit of Materials Science and Technology 2020 (SMST 2020)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Sluggish dynamic in high entropy metallic glass alloys2020
- Author(s)
  Jing JIANG, Takeshi WADA, Hidemi KATO
- Organizer
  日本材料学会第6回材料WEEK「材料シンポジウム」
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 金属溶湯脱成分法による L10-FeNi 規則合金作製の試み2020
- Author(s)
  中村祐、加藤秀実、和田武、S. H. Joo
- Organizer
  第139回金属材料研究所講演会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Preparation of nanoporous metals by liquid metal dealloying (LMD)2020
- Author(s)
  Takeshi WADA, Hidemi KATO
- Organizer
  Summit of Materials Science and Technology 2020 (SMST 2020)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Preparation and Application of Nanoporous Mo-Co alloy by Liquid Metal Dealloying2020
- Author(s)
  宋瑞瑞、加藤秀実
- Organizer
  学際・国際的高度人材育成ライフイノベーションマテリアル創製共同研究プロジェクト第5回公開討論会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Effect of minor elements on microstructural and mechanical properties changes in (Cu-Fe) immiscible metallic composite2020
- Author(s)
  Yeon Beom JEONG, Hidemi KATO
- Organizer
  学際・国際的高度人材育成ライフイノベーションマテリアル創製共同研究プロジェクト第5回公開討論会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Effect of minor elements on microstructural and mechanical properties changes in (Cu-Fe) immiscible metallic composite2020
- Author(s)
  Yeon Beom JEONG, Hidemi KATO
- Organizer
  学際・国際的高度人材育成ライフイノベーションマテリアル創製共同研究プロジェクト第5回公開討論会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Sluggish dynamic in high entropy metallic glass alloys2020
- Author(s)
  Jing JIANG, Takeshi WADA, Hidemi KATO
- Organizer
  日本材料学会第6回材料WEEK「材料シンポジウム」
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Preparation and Application of Nanoporous Mo-Co alloy by Liquid Metal Dealloying2020
- Author(s)
  宋瑞瑞、加藤秀実
- Organizer
  学際・国際的高度人材育成ライフイノベーションマテリアル創製共同研究プロジェクト第5回公開討論会
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] ハイエントロピー効果に基づく新材料と新機能の探査2020
- Author(s)
  加藤秀実、武藤泉、武藤浩行、西山宜正、和田武、竹内章
- Organizer
  日本金属学会2020年秋期(第167回)講演大会
- Invited
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 金属液体中での脱成分現象を利用したポーラス炭素薄膜の作製とその特性2020
- Author(s)
  加藤秀実、朴元永
- Organizer
  化学系学協会東北大会
- Invited
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Fabrication of 3D micro-patterned metallic glass by imprinting process and application to Li-ion battery (LIB) electrode2020
- Author(s)
  Rise TAKAGI, Takeshi WADA, Hidemi KATO
- Organizer
  The 4th Symposium for The Core Research Cluster for Materials Science and the 3rd Symposium on International Joint Graduate Program in Materials Science
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Imprinting Pd-based metallic glass grating with Si mold2019
- Author(s)
  Hidemi KATO, Masanari Datekyu, Wataru Yashiro,
- Organizer
  International conference on METALLURGY AND MATERIALS ENGINEERING「DEVELOPMENT AND RESEARCH ON ADVANCED TECHNOLOGY AND NEW MATERIALS」
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloys2019
- Author(s)
  iang Jing, Dmitri V. Louzguine-Luzgin, Takeshi Wada, Hidemi Kato
- Organizer
  International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development Satellite (iLIM-s)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Zr-Hf-Ti-Al-Co-Ni-Cuハイエントロピーバルク金属ガラスの作製2019
- Author(s)
  和田武、加藤秀実、竹内章
- Organizer
  粉体粉末冶金協会　2019年度春季大会(第123回講演大会)
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloys、2019
- Author(s)
  Jing Jiang、Hidemi Kato、Dmitri V. Louzguine-Luzgin、
- Organizer
  日本金属学会2019年春期講演大会(第164回）、2019年3月20-22日、東北電気大学、東京
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] 金属溶湯脱成分法を用いたポーラス炭素の細孔形成機構2019
- Author(s)
  朴元永、朱修賢、和田武、加藤秀実
- Organizer
  日本金属学会2019年秋期講演大会(第165回）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloys2019
- Author(s)
  Jing Jiang、Hidemi Kato、Dmitri V. Louzguine-Luzgin
- Organizer
  第137回金属材料研究所講演会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Preparation of High Entropy Bulk Metallic Glass with High Glass Forming Ability2019
- Author(s)
  T. Wada, H. Kato,
- Organizer
  HOT TOPICS IN SOLID STATE CHEMISTRY: FROM NEW IDEAS TO NEW MATERIALS
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 金属溶湯脱成分法を用いたポーラスVの作製と水素吸蔵特性2019
- Author(s)
  庄司理信、張志杰、佐藤豊人、和田武、折茂慎一、加藤秀実
- Organizer
  日本金属学会2019年秋期講演大会(第165回）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Microstructure study of Fe-based Bulk Metal Glass reinforced with Al2O3 obtained by Spark Plasma Sintering2019
- Author(s)
  Liliana ZARAZUA, Soo-Hyun JOO, Kazuhiro OGAWA, Hidemi KATO, Yuji ICHIKAWA, Nicolas MARY
- Organizer
  11th workshop of ELyTGlobal
- Invited
- Data Source
  KAKENHI-PROJECT-19K05092
[Presentation] 金属溶湯脱成分法を用いた三次元共連続ポーラス炭素の電気化学特性2019
- Author(s)
  朴元永、和田武、朱修賢、加藤秀実
- Organizer
  日本金属学会2019年春期講演大会(第164回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Preparation of nanoporous tungsten by liquid metal dealloying2019
- Author(s)
  Khuchitbaatar Gerelmaa, Jiang Jing, Takeshi Wada, Hidemi Kato
- Organizer
  International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development Satellite (iLIM-s)
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Development of various porous alloys via liquid metal dealloying2019
- Author(s)
  Soo Hyun Joo, Takeshi Wada, Hidemi Kato
- Organizer
  第2回構造材料研究部会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Preparation of High Entropy Bulk Metallic Glass with High Glass Forming Ability2019
- Author(s)
  T. Wada, H. Kato
- Organizer
  PRICM10
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Overcoming Thermal Coarsening in Nanoporous Materials via High-Entropy Design2019
- Author(s)
  Soo Hyun Joo, Jae Woong Bae, Takeshi Wada, Hyoung Seop Kim, Ilya Okulov, Hidemi Kato
- Organizer
  The Korean Institute of Metals and Materials Annual Spring Meeting 2019
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Imprinting Pd-based metallic glass grating with Si mold2019
- Author(s)
  H. Kato, Masanari Datekyu, Wataru Yashiro
- Organizer
  International conference on METALLURGY AND MATERIALS ENGINEERING, DEVELOPMENT AND RESEARCH ON ADVANCED TECHNOLOGY AND NEW MATERIALS
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] Zr-Hf-Ti-Al-Co-Ni-Cuハイエントロピーバルク金属ガラスの作製2019
- Author(s)
  和田　武、加藤　秀実、竹内　章
- Organizer
  日本金属学会2019年春期講演大会(第164回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 複相前駆合金を用いた金属溶湯脱成分法による階層構造ポーラス金属の作製2019
- Author(s)
  佐藤俊太郎、和田武、加藤秀実
- Organizer
  日本金属学会2019年秋期講演大会(第165回）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Effect of minor alloying elements on the microstructure and mechanical property in (Cu-30Fe)-2X alloys2019
- Author(s)
  Yeon Beom Jeong, Hidemi Kato
- Organizer
  第3回構造材料研究部会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloys2019
- Author(s)
  Jing Jiang, Hidemi Kato, Dmitri.V.Louzguine
- Organizer
  Perspective materials. Russian-Japanese scientific dialogue
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements2019
- Author(s)
  Yeon Beom Jeong, Hidemi Kato
- Organizer
  The Future of Materials Engineering - Dramatic Innovation to the next 100 years,
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Evolution of heterogeneous structure and phase transformation behavior during liquid metal dealloying2019
- Author(s)
  Soohyun Joo, Hidemi Kato, Takeshi Wada,
- Organizer
  TMS 2019 Annual Meeting & Exhibition,
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Three-dimensional bicontinuous nanoporous high-entropy alloy by liquid metal dealloying2019
- Author(s)
  加藤秀実、Soo-Hyun JOO、和田武
- Organizer
  日本金属学会2019年秋期講演大会(第165回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Preparation of High Entropy Bulk Metallic Glass with High Glass Forming Ability2019
- Author(s)
  T. Wada, H. Kato
- Organizer
  HOT TOPICS IN SOLID STATE CHEMISTRY: FROM NEW IDEAS TO NEW MATERIALS
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloys2019
- Author(s)
  Jing Jiang、Hidemi Kato、Dmitri V. Louzguine-Luzgin
- Organizer
  第3回構造材料研究部会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Cryogenic Thermal and Mechanical Processing of TiNi Based Crystalline/Amorphous Alloys2019
- Author(s)
  J. Jiang, H. Kato, D. Louzguine
- Organizer
  The 10th Pacific Rim International Conference on Advanced Materials and Processing (PRICM10)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] Nanoporous and Nanocomposite metals by Liquid Metal Dealloying2019
- Author(s)
  H. Kato
- Organizer
  Joint Symposium SAKES (Sendai Albi Knowledge in Engineering Seminars)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] Zr-Hf-Ti-Al-Co-Ni-Cuハイエントロピーバルク金属ガラスの作製2019
- Author(s)
  和田　武、加藤　秀実、竹内　章
- Organizer
  日本金属学会2019年春期講演大会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloy2019
- Author(s)
  JING JIANG、加藤秀実、Dmitri V. Louzguine
- Organizer
  日本金属学会2019年秋期講演大会(第165回）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 脱成分現象を利用した新規材料開発2019
- Author(s)
  加藤秀実
- Organizer
  鉄鋼協会東北地区講演会
- Invited
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Evolution of heterogeneous structure and phase transformation behavior during liquid metal dealloying2019
- Author(s)
  Soohyun Joo, Hidemi Kato, Takeshi Wada
- Organizer
  TMS 2019 Annual Meeting & Exhibition
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Microscopic Phase structure of the As-Cast and the Peak-Aged Mg-Yb-Zn-Zr Alloy2019
- Author(s)
  Deping Zhang, Soo-Hyun Joo, Jing Jiang, Hidemi Kato, Qiang Yang, Jian Meng, Yaqin Zhang
- Organizer
  The 10th Pacific Rim International Conference on Advanced Materials and Processing (PRICM10)
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Preparation of nanoporous tungsten by liquid metal dealloying2019
- Author(s)
  Khuchitbaatar Gerelmaa, Kato Hidemi
- Organizer
  日本金属学会2019年秋期講演大会(第165回）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Electrochemical properties of three-dimensional bicontinuous porous carbon produced by liquid metal dealloying2019
- Author(s)
  Won-Young Park, Takeshi Wada, Soo-Hyun Joo, Hidemi Kato
- Organizer
  The 2nd Symposium for World Leading Research Centers-Materials Science and Spintronics-
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Experiment and Theory of Buckling Failure of Si Grating for Imprinting Mold2019
- Author(s)
  Masanari DATEKYU, Wataru YASHIRO, Hidemi KATO
- Organizer
  Visual-JW 2019 & WSE 2019
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Evolution of porous structure and unique orientation relationships during liquid metal dealloying from FCC precursor to BCC ligament2019
- Author(s)
  Soo-Hyun Joo、Takeshi Wada、Hidemi Kato
- Organizer
  日本金属学会2019年春期講演大会(第164回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloys2019
- Author(s)
  Jing Jiang, Hidemi Kato, Dmitri.V.Louzguine
- Organizer
  Hot Topics in Solid State Chemistry: From New Ideas to New Materials（HTSSC-2019）
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Preparation of nanoporous metals by liquid metal dealloying2019
- Author(s)
  Takeshi Wada, Hidemi Kato
- Organizer
  International conference on METALLURGY AND MATERIALS ENGINEERING「DEVELOPMENT AND RESEARCH ON ADVANCED TECHNOLOGY AND NEW MATERIALS」
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloys2019
- Author(s)
  Jing Jiang, Hidemi Kato, Dmitri.V.Louzguine
- Organizer
  Hot Topics in Solid State Chemistry: From New Ideas to New Materials（HTSSC-2019）
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Effect of Minor Elements Addition on Microstructure and Mechanical Property of Ti-Fe Hypereutectic Alloy2019
- Author(s)
  Yeon Beom Jeong, Hidemi Kato
- Organizer
  2019年度東北大学金属材料研究所共同研究ワークショップ・日本バイオマテリアル学会東北ブロック講演会「バイオマテリアル研究を牽引する研究者との対話」
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloys2019
- Author(s)
  Jiang Jing, Dmitri V. Louzguine-Luzgin, Takeshi Wada, Hidemi Kato
- Organizer
  International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development Satellite (iLIM-s)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Hierarchical nanoporous copper fabricated by one-step dealloying2019
- Author(s)
  Ruirui Song, Ling Zhang, Deng Pan,Mingwei Chen, Hidemi Kato
- Organizer
  Summit of Materials Science (SMS) 2019 and GIMRT User Meeting 2019
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Preparation of High Entropy Bulk Metallic Glass with High Glass Forming Ability2019
- Author(s)
  T. Wada, H. Kato
- Organizer
  The 10th Pacific Rim International Conference on Advanced Materials and Processing (PRICM10)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] Preparation of nanoporous metals by liquid metal dealloying2019
- Author(s)
  Takeshi Wada, Hidemi Kato
- Organizer
  Preparation of nanoporous metals by liquid metal dealloying", International conference on METALLURGY AND MATERIALS ENGINEERING「DEVELOPMENT AND RESEARCH ON ADVANCED TECHNOLOGY AND NEW MATERIALS」
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Three-dimensional bicontinuous nanoporous high-entropy alloy and its sluggish coarsening2019
- Author(s)
  S.-H. Joo, T. Wada, I.V. Okulov, H. Kato
- Organizer
  2019 Third International Symposium on Nanoporous Materials by Alloy Corrosion,
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Nanoporous high-entropy alloy overcome the thermally-induced coarsening2019
- Author(s)
  Soo-Hyun JOO, Jae Wung Bae, Hyoung Seop Kim, Yusuke Shimada, Toyohiko Konno, Ilya Okulov, Takeshi Wada, Hidemi Kato
- Organizer
  粉体粉末冶金協会　2019年度春季大会(第123回講演大会)
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 複相前駆合金を用いた金属溶湯脱成分法による階層構造ポーラス金属の作製2019
- Author(s)
  佐藤俊太郎、和田武、加藤秀実
- Organizer
  第3回構造材料研究部会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Evolution of porous structure and unique orientation relationships during liquid metal dealloying from FCC precursor to BCC ligament2019
- Author(s)
  Soo-Hyun Joo、Takeshi Wada、Hidemi Kato
- Organizer
  日本金属学会2019年春期講演大会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Three-dimensional bicontinuous nanoporous high-entropy alloy by liquid metal dealloying2019
- Author(s)
  加藤秀実、Soo-Hyun JOO、和田武
- Organizer
  日本金属学会2019年秋期講演大会(第165回）
- Invited
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Microstructural evolution of the as-cast and the peak-aged Mg-Yb-Zn-Zr alloy2019
- Author(s)
  Deping Zhang, Qiang Yang, Soohyun Joo, Hidemi Kato
- Organizer
  日本金属学会2019年春期講演大会(第164回）
- Data Source
  KAKENHI-PROJECT-18F18733
[Presentation] 金属溶湯脱成分反応における相変態挙動の3元系状態図に基づく解析2019
- Author(s)
  菅　卓海、Pierre-Antoine GESLIN、和田　武、加藤　秀実
- Organizer
  日本金属学会2019年春期講演大会(第164回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Cryogenic Thermal and Mechanical Processing of TiNi Based Crystalline/Amorphous Alloys2019
- Author(s)
  Jing Jiang, Hidemi Kato, Dmitri Louzguine
- Organizer
  The 10th Pacific Rim International Conference on Advanced Materials and Processing (PRICM10)
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Preparation of nanoporous tungsten by liquid metal dealloying2019
- Author(s)
  Khuchitbaatar Gerelmaa, Kato Hidemi
- Organizer
  International conference on METALLURGY AND MATERIALS ENGINEERING「DEVELOPMENT AND RESEARCH ON ADVANCED TECHNOLOGY AND NEW MATERIALS」
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Three-dimensional bicontinuous nanoporous high-entropy alloy and its sluggish coarsening2019
- Author(s)
  H. Kato, S.-H. Joo, T. Wada, I.V. Okulov
- Organizer
  2019 Third International Symposium on Nanoporous Materials by Alloy Corrosion
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Preparation of nanoporous tungsten by liquid metal dealloying2019
- Author(s)
  Gerelmaa Khuchitbaatar, Hidemi Kato
- Organizer
  Hot Topics in Solid State Chemistry: From New Ideas to New Materials（HTSSC-2019）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] The effect of cryogenic thermal cyclic processing on the mechanical properties of TiNi based crystalline/amorphous alloys2019
- Author(s)
  Jing Jiang、Hidemi Kato、Dmitri V. Louzguine-Luzgin
- Organizer
  日本金属学会2019年春期講演大会(第164回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Nanoporous and Nanocomposite metals by Liquid Metal Dealloying2019
- Author(s)
  Hidemi Kato
- Organizer
  Joint Symposium SAKES (Sendai Albi Knowledge in Engineering Seminars)
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Preparation of High Entropy Bulk Metallic Glass with High Glass Forming Ability2019
- Author(s)
  T. Wada, H. Kato
- Organizer
  PRICM10
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Liquid metal dealloying and its P/M application2019
- Author(s)
  Hidemi Kato
- Organizer
  International Symposium on Innovation in Materials Processing (ISIMP2019)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Nanoporous High-Entropy Alloys Overcome the Thermally-Induced Coarsening2019
- Author(s)
  Soo-Hyun Joo, Takeshi Wada, Hidemi Kato
- Organizer
  The 10th Pacific Rim International Conference on Advanced Materials and Processing (PRICM10)
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 高アスペクト比Pd基金属ガラス回折格子の作製における金属ガラスリボンの前処理の検討2019
- Author(s)
  達久将成、矢代航、加藤秀実
- Organizer
  日本金属学会2019年秋期講演大会(第165回）
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Evolution of porous structure and unique orientation relationships during liquid metal dealloying from FCC precursor to BCC ligament2019
- Author(s)
  Soo-Hyun Joo, Takeshi Wada, Hidemi Kato
- Organizer
  International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development Satellite (iLIM-s)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Electrochemical properties of three-dimensional bicontinuous porous carbon produced by liquid metal dealloying2019
- Author(s)
  Won-Young Park, Takeshi Wada, Soo-Hyun Joo, Hidemi Kato
- Organizer
  2019 Third International Symposium on Nanoporous Materials by Alloy Corrosion,
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Novel nanoporous high-entropy alloy beating thermal coarsening; its mechanical and electrolytic capacitor properties2019
- Author(s)
  S.-H. Joo, T. Wada, H.S. Kim, H. Kato
- Organizer
  Summit of Materials Science (SMS) 2019 and GIMRT User Meeting 2019
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Nanocomposite Alloy Tailored by Liquid Metal Dealloying to Realize High Specific Strength2019
- Author(s)
  Yeon Beom Jeong, Hidemi Kato
- Organizer
  The 2nd Symposium on International Joint Graduate Program in Materials Science
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Liquid metal dealloying and its P/M application2019
- Author(s)
  Hidemi Kato
- Organizer
  International Symposium on Innovation in Materials Processing (ISIMP2019)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Imprinting Pd-based metallic glass grating with Si mold2019
- Author(s)
  Hidemi KATO, Masanari Datekyu, Wataru Yashiro
- Organizer
  International conference on METALLURGY AND MATERIALS ENGINEERING「DEVELOPMENT AND RESEARCH ON ADVANCED TECHNOLOGY AND NEW MATERIALS」
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Development of soft magnetic Fe-Co porous using liquid metal dealloying: its microstructural evolutions and reduced core loss at high frequency2018
- Author(s)
  S.-H.Joo, Y.Zhang, T.Wada, H.Kato
- Organizer
  15th Materials Science School for Young Scientists (KINKEN WAKATE 2018) & Symposium of 30th Anniversary of Nano Crystalline Soft Magnetic Alloys (FINEMET 30)
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Influence of dealloying media metal on microstructure and properties of porous product by liquid metal dealloying2018
- Author(s)
  W.-Y.Park, T.Wada, S.-H.Joo, H.Kato,
- Organizer
  3rd International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-3)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Analysis of liquid metal dealloying reaction by ternary phase diagram2018
- Author(s)
  T. Suga, P.-A. Geslin, T. Wada, H. Kato
- Organizer
  Russia-Japan Joint Seminar “Non-equilibrium processing of materials: experiments and modeling”
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Cryogenic thermal cycling and high pressure torsion processing of Ti-Ni based crystal/glassy alloys2018
- Author(s)
  J. Jiang, H. Kato, D.V. Louzguine-Luzgin, 東北大学
- Organizer
  金属材料研究所共同研究ワークショップ・日本バイオマテリアル学会東北地域講演会「女性研究者が語るバイオマテリアル研究」、2018年8月24日、金属材料研究所、宮城
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] メカニカルアロイングによるCoCrFeMnNi高エントロピー合金粉末の作製とその放電プラズマ焼結2018
- Author(s)
  朱　修賢、和田　武、加藤　秀実、Hong Soon-Jik、Kim Hyoung Seop
- Organizer
  日本金属学会2018年秋期講演大会(第163回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Formation of Amorphous and Nanocrystalline Zr-Cu-Ni-Al Based Dual Phase Alloys and Their Plastic Deformation2018
- Author(s)
  Tohru Yamasaki, Hiroki Adachi, Koichi Tsuchiya and Hidemi Kato
- Organizer
  Abstracts of International Conference on Processing & Manufacturing of Advanced Materials(THERMEC'2018)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] Fabrication of 3D interconnected porous alloys by liquid metal dealloying using medium-entropy & high-entropy precursors2018
- Author(s)
  Soo-Hyun Joo, Takeshi Wada, Ilya Okulov and Hidemi Kato
- Organizer
  The 2nd International Conference on High-Entropy Materials (ICHEM 2018)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Influence of dealloying media metal on microstructure and properties of porous product by liquid metal dealloying2018
- Author(s)
  Won-Young Park, Takeshi Wada, Soo-Hyun Joo, Hidemi Kato
- Organizer
  Russia-Japan Joint Seminar “Non-equilibrium processing of materials: experiments and modeling
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Orientation relationship during liquid metal dealloying from FCC FeCoNi precursor to BCC FeCo ligament at low temperature2018
- Author(s)
  Soo-Hyun JOO, Takeshi Wada, Hidemi Kato,
- Organizer
  Summit of Materials Science 2018(SMS2018)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Dynamic study of primary and secondary relaxations in Pd-Ni-Cu-P glass2018
- Author(s)
  Hidemi Kato,
- Organizer
  15th Materials Science School for Young Scientists (KINKEN WAKATE 2018) & Symposium of 30th Anniversary of Nano Crystalline Soft Magnetic Alloys (FINEMET 30)
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 規則的に配列した粒子が形成する空孔を利用したナノサイズ分離材の作製2018
- Author(s)
  松岡一幸，服部敏明，武藤浩行，加藤亮
- Organizer
  日本分析化学会中部支部
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属溶湯脱成分によるナノオープンポーラスステンレス鋼の作製とそのリチウム二次電池負極集電体への応用2018
- Author(s)
  和田　武、加藤　秀実
- Organizer
  日本金属学会2018年秋期講演大会(第163回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Temperature effect on the microstructure of FeCo porous produced by liquid metal dealloying: its long-range ordering and transformation behavior2018
- Author(s)
  S.-H. Joo, K. Yubuta, T. Wada, H. Kato
- Organizer
  KINKEN-KIST joint symposium 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Investigation of Casting Diameter, Surface Defects and Low Temperature Thermal Cycles on Ductility in Bulk Metallic Glasses with usual and High Super Cooled Liquid Viscosity.2018
- Author(s)
  K. FUJITA, C. KISAKI, M. FUJISIGE, Y. YAMAZAKI, K. AMIYA, T. YAMASAKI, H. KATO
- Organizer
  Abstracts of International Conference on Processing & Manufacturing of Advanced Materials(THERMEC'2018) P119, p.846.
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] Temperature effect on the microstructure of FeCo porous produced by liquid metal dealloying: its long-range ordering and transformation behavior2018
- Author(s)
  S.-H. Joo, K. Yubuta, T. Wada, H. Kato,
- Organizer
  KINKEN-KIST joint symposium 2018
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Effect of minor dopant on ligament growth of porous metals prepared by liquid metal dealloying2018
- Author(s)
  Hidemi KATO
- Organizer
  Russia-Japan Joint Seminar “Non-equilibrium processing of materials: experiments and modeling”
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Development of soft magnetic Fe-Co porous using liquid metal dealloying: its microstructural evolutions and reduced core loss at high frequency2018
- Author(s)
  S.-H.Joo, Y.Zhang, T.Wada, H.Kato
- Organizer
  15th Materials Science School for Young Scientists (KINKEN WAKATE 2018) & Symposium of 30th Anniversary of Nano Crystalline Soft Magnetic Alloys (FINEMET 30)
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 脱成分技術を用いたハイエントロピー合金の多孔および複合化の検討2018
- Author(s)
  加藤　秀実、和田　武、JOO Soo-hyun
- Organizer
  日本金属学会2018年秋期講演大会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Mg溶湯中のFe-Ni合金に生じる脱Ni反応の特異な温度依存性2018
- Author(s)
  野口　仁美、Soo-Hyun Joo、和田　武、加藤　秀実
- Organizer
  日本金属学会2018年秋期講演大会(第163回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Influence of dealloying media metal on microstructure and properties of porous product by liquid metal dealloying2018
- Author(s)
  Won-Young Park, Takeshi Wada, Soo-Hyun Joo, Hidemi Kato
- Organizer
  Summit of Materials Science 2018(SMS2018)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 脱成分技術を用いたハイエントロピー合金の多孔および複合化の検討2018
- Author(s)
  加藤　秀実、和田　武、JOO Soo-hyun
- Organizer
  日本金属学会2018年秋期講演大会(第163回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 二段階金属溶湯脱合金化による階層構造ポーラス金属の作製2018
- Author(s)
  和田武、Pierre-Antoine Geslin、加藤秀実
- Organizer
  日本金属学会2018年春期講演大会(第162回）
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] abrication of 3D interconnected porous alloys by liquid metal dealloying using medium-entropy & high-entropy precursors2018
- Author(s)
  Soo-Hyun Joo, Takeshi Wada, Ilya Okulov and Hidemi Kato
- Organizer
  The 2nd International Conference on High-Entropy Materials (ICHEM 2018)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Cryogenic thermal and mechanical processing of Ti-Ni-Cu-Zr based crystal/glassy alloys2018
- Author(s)
  J. Jiang, H. Kato, D.V. Louzguine-Luzgin,
- Organizer
  The 25th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2018)
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Analysis of liquid metal dealloying reaction by ternary phase diagram2018
- Author(s)
  T. Suga, P.-A. Geslin, T. Wada, H. Kato
- Organizer
  Russia-Japan Joint Seminar “Non-equilibrium processing of materials: experiments and modeling
- Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Orientation relationship during liquid metal dealloying from FCC FeCoNi precursor to BCC FeCo ligament at low temperature2018
- Author(s)
  Soo-Hyun JOO, Takeshi Wada, Hidemi Kato
- Organizer
  Summit of Materials Science 2018(SMS2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] 金属ガラスのSi負極集電体への応用2018
- Author(s)
  鎌田　峻輔、和田　武、加藤　秀実
- Organizer
  日本金属学会2018年秋期講演大会(第163回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Cryogenic thermal and mechanical processing of Ti-Ni-Cu-Zr based crystal/glassy alloys,2018
- Author(s)
  J. Jiang, H. Kato, D.V. Louzguine-Luzgin,
- Organizer
  The 25th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2018), 2018.7.2-6, Rome, Italy
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] Effect of minor dopant on ligament growth of porous metals prepared by liquid metal dealloying2018
- Author(s)
  Hidemi KATO
- Organizer
  Russia-Japan Joint Seminar “Non-equilibrium processing of materials: experiments and modeling
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 脱成分現象を利用した新規材料開発2018
- Author(s)
  加藤秀実
- Organizer
  鉄鋼協会東北地区講演会
- Invited
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Cryogenic thermal cycling and high pressure torsion processing of Ti-Ni based crystal/glassy alloys2018
- Author(s)
  J. Jiang, H. Kato, D.V. Louzguine-Luzgin
- Organizer
  15th Materials Science School for Young Scientists (KINKEN WAKATE 2018) & Symposium of 30th Anniversary of Nano Crystalline Soft Magnetic Alloys (FINEMET 30)
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] 3元系状態図に基づく金属溶湯中の脱合金反応解析2018
- Author(s)
  菅　卓海、Pierre-Antoine GESLIN、和田　武、加藤　秀実
- Organizer
  日本金属学会2018年秋期講演大会(第163回）
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] Cryogenic thermal cycling and high pressure torsion processing of Ti-Ni based crystal/glassy alloys2018
- Author(s)
  J. Jiang, H. Kato, D.V. Louzguine-Luzgin
- Organizer
  東北大学金属材料研究所共同研究ワークショップ・日本バイオマテリアル学会東北地域講演会「女性研究者が語るバイオマテリアル研究」
- Data Source
  KAKENHI-ORGANIZER-18H05450
[Presentation] メカニカルアロイングによるCoCrFeMnNi高エントロピー合金粉末の作製とその放電プラズマ焼結2018
- Author(s)
  朱　修賢、和田　武、加藤　秀実、Hong Soon-Jik、Kim Hyoung Seop
- Organizer
  日本金属学会2018年秋期講演大会
- Data Source
  KAKENHI-PLANNED-18H05452
[Presentation] Remedial Effects of Au, Pd Additions on Plastic Deformation of Zr-Cu-Ni-Al Metallic Glasses2017
- Author(s)
  T. Doi, T. Yamasaki, H. Kato
- Organizer
  JSPMIC 2017, Kyoto, Japan
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] 金属ガラスのインプリントによる高アスペクト比Ｘ線回折格子の開発2017
- Author(s)
  矢代航、加藤宏祐、竹内晃久、Sadeghilaridjani Maryam、加藤秀実
- Organizer
  第30回日本放射光学会年会・放射光科学合同シンポジウム
- Place of Presentation
  兵庫県神戸市　神戸芸術センター
- Year and Date
  2017-01-07
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] Formation of Amorphous and Nanocrystalline Zr-Cu-Ni-Al Based Dual Phase Alloys by Severe Plastic Deformation2017
- Author(s)
  T. Yamasaki, T. Doi, K.Tsuchiya, H. Kato
- Organizer
  ＩＵＭＳＲ－ＩＣＡM, 2017, Kyoto, Japan
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] Formation of nanoporous Fe-based alloy by solid state interfacial dealloying reaction2017
- Author(s)
  Takeshi WADA, Hidemi KATO
- Organizer
  JSPM International Conference on Powder and Powder Metallurgy ～ 60th Anniversary ～
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] Formation and Morphological Evolution of Nano/Micro Porous Metals by Liquid Metal Dealloying2017
- Author(s)
  Hidemi Kato, Takeshi Wada
- Organizer
  24th International Symposium on Metastable, Amorphous and Nanostructured Materials(ISMANAM2017)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] Crystallization Behavior and Plastic Deformation of Zr-Cu-Ni-Al-M (M: Pd, Pt, Au and Ag) Bulk Metallic Glasses2017
- Author(s)
  T. Yamasaki, T. Doi, K. Fujita, H. Kato
- Organizer
  FIMPART'2017, Bordeaux, France
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] Plastic Deformation Behavior of Zr-Cu-Ni-Al-NM (NM: Noble Metal) Bulk Metallic Glasses2017
- Author(s)
  T. Yamasaki, T. Doi, K. Fujita, H. Kato
- Organizer
  JSPMIC 2017, Kyoto, Japan
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H01334
[Presentation] Suppressing Ligament Growth of Porous Metals during Liquid Metal Dealloying Process2017
- Author(s)
  加藤秀実
- Organizer
  JSPM International Conference on Powder and Powder Metallurgy ～ 60th Anniversary ～
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] 固相脱合金化による鉄基合金ナノ構造体の作製2017
- Author(s)
  和田武,　加藤秀実
- Organizer
  日本金属学会2017年秋期講演大会(第161回）
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] Microstructure characterization along the process of　nanoporous metal made by alloying in metalic melt bath by Xray tomography and SEM-EBSD2016
- Author(s)
  Morgane MOKHTARI, Hidemi KATO, Takeshi WADA, et al
- Organizer
  23rd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM2016)
- Place of Presentation
  奈良
- Year and Date
  2016-07-03
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 固相脱合金化反応に及ぼす前駆合金組成の影響2016
- Author(s)
  和田武、齋藤樹里、湯葢邦夫、加藤秀実
- Organizer
  日本金属学会2016年秋季講演大会
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] 金属溶湯脱成分法を用いたオープンセル型ポーラス金属の開発2016
- Author(s)
  和田武, 加藤秀実
- Organizer
  学際・国際的高度人材育成ライフイノベーションマテリアル創製共同研究プロジェクト平成28 年度キックオフ公開討論会
- Place of Presentation
  名古屋
- Year and Date
  2016-07-08
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 金属溶湯脱成分法により作製したドープナノポーラスSiの形態とリチウムイオン電池性能との関係2016
- Author(s)
  山田純平, 加藤秀実, 和田武
- Organizer
  日本金属学会2016年秋期大会
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 金属溶湯脱成分法を用いたポーラス卑・半金属の作製とそのエネルギーデバイスへの応用2016
- Author(s)
  加藤秀実, 和田武
- Organizer
  日本金属学会2016年秋期大会
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Invited
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] Preparation of doped-nanoporous silicon by dealloying in metallic melt and its application to the negative electrode for lithium-ion batteries2016
- Author(s)
  Junpei YAMADA, Hidemi KATO, Takeshi WADA
- Organizer
  Summit of Materials Science 2016(SMS2016)
- Place of Presentation
  東北大学　金属材料研究所
- Year and Date
  2016-05-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] Preparation of nanoporous base metals by dealloying in metallic melt and their application for energy related materials2016
- Author(s)
  Takeshi WADA, Hidemi KATO
- Organizer
  2016 Russia-Japan Conference "Advanced Materials: Synthesis, Processing and Properties of Nanostructure
- Place of Presentation
  ロシア・ノヴォシビリスク
- Year and Date
  2016-10-30
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] Graphitization and Activation of Open-Cell Type Porous Carbon Prepared by Dealloying in Metallic Melt2016
- Author(s)
  Won Young PARK, Hidemi KATO, Takeshi WADA, Seung-Geun YU
- Organizer
  The 1st International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-1)
- Place of Presentation
  大阪大学
- Year and Date
  2016-10-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 回折格子を用いた定量的GISAXSイメージング2016
- Author(s)
  矢代航、加藤宏祐、百生敦、池田進、和田恭雄、鈴木芳生、竹内晃久
- Organizer
  日本物理学会第71回年次大会
- Place of Presentation
  東北学院大学泉キャンパス（宮城県仙台市）
- Year and Date
  2016-03-19
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] 金属溶湯脱成分法を用いた多孔質金属の作製およびリチウム空気電池用バインダーフリー空気極への応用2016
- Author(s)
  森下史弥, 加藤秀実, 和田武, et al.
- Organizer
  第132回金属材料研究所講演会
- Place of Presentation
  東北大学　金属材料研究所
- Year and Date
  2016-11-24
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 金属溶湯中での脱成分現象を利用した金属ガラス複合材料の作製とポーラス材料への展開2016
- Author(s)
  加藤　秀実、和田　武
- Organizer
  2016 日本金属学会春期講演大会
- Place of Presentation
  東京理科大学
- Year and Date
  2016-03-23
- Invited
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 金属溶湯中の脱成分現象を利用した金属ガラス複合材料の作製とポーラス金属への応用2016
- Author(s)
  加藤秀実
- Organizer
  日本材料学会金属ガラス部門委員会第３９回研究会
- Place of Presentation
  山口宇部
- Year and Date
  2016-11-18
- Invited
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] Imprinting less viscous workable Gd-based metallic glass grating for neutron phase imaging2016
- Author(s)
  M. Sadeghilaridjani, H.Kato
- Organizer
  2016 日本金属学会春期講演大会
- Place of Presentation
  東京理科大学
- Year and Date
  2016-03-23
- Data Source
  KAKENHI-PROJECT-26630341
[Presentation] 金属溶湯脱成分法を用いたポーラス卑・半金属の作製とそのエネルギーデバイスへの応用2016
- Author(s)
  加藤秀実、和田武
- Organizer
  日本金属学会2016年秋期大会
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Invited
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] Three-Dimensional bicontinuous porous carbon generated in low temperature metallic liquid2016
- Author(s)
  Seung Geyn YU, Hidemi KATO, Takeshi WADA
- Organizer
  23rd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM2016)
- Place of Presentation
  奈良
- Year and Date
  2016-07-03
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 金属溶湯脱成分法を用いて作製したオープンセル型ポーラス炭素と黒鉛化および賦活処理に伴う特性変化2016
- Author(s)
  朴元永, 兪承根, 加藤秀実, 和田武
- Organizer
  日本金属学会2016年秋期大会
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 金属ガラスインプリンティングによる高アスペクト比Ｘ線回折格子の開発2016
- Author(s)
  矢代航、加藤宏祐、竹内晃久、Sadeghilaridjani Maryam、加藤秀実
- Organizer
  東北大学金属材料研究所共同利用ワークショップ　3 GeV高輝度放射光SLiT-Jと産学協創
- Place of Presentation
  宮城県仙台市　東北大学片平キャンパス
- Year and Date
  2016-12-13
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] Preparation of 3D Nanoporous Si by Dealloying in Metallic Melt and its Application of Lithium Ion　Rechargeable Battery Negative Electrode2016
- Author(s)
  Takeshi WADA, Hidemi KATO
- Organizer
  The 1st International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-1)
- Place of Presentation
  大阪大学
- Year and Date
  2016-10-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] X-ray Transmission Gratings Fabricated by Metallic Glass Imprinting Technique2016
- Author(s)
  Wataru Yashiro, Kosuke Kato, Sadeghilaridjani Maryam, Atsushi Momose, Takenao Shinohara, and Hidemi Kato
- Organizer
  International Conference on X-ray Optics, Detectors, Sources, and their Applications 2016 (XOPT2016)
- Place of Presentation
  神奈川県横浜市　パシフィコ横浜
- Year and Date
  2016-05-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] Preparation of nanoporous base metals by dealloying in metallic melt and their application for energy related materials2016
- Author(s)
  Takeshi WADA, Hidemi KATO
- Organizer
  2016 Russia-Japan Conference "Advanced Materials: Synthesis, Processing and Properties of Nanostructure
- Place of Presentation
  ロシア・ノヴォシビリスク
- Year and Date
  2016-10-30
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 単結晶前駆合金の金属溶湯脱合金化反応およびポーラス構造発達過程2016
- Author(s)
  齋藤樹里, 加藤秀実, 和田武, 湯葢邦夫
- Organizer
  日本金属学会2016年秋期大会
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] Ｘ線回折格子干渉計による微小角入射小角Ｘ線散乱イメージング2016
- Author(s)
  矢代航、加藤宏祐、百生敦、池田進、和田恭雄、鈴木芳生、竹内晃久
- Organizer
  第29回日本放射光学会年会・放射光科学合同シンポジウム
- Place of Presentation
  東京大学柏の葉キャンパス駅前サテライト（千葉県柏市）
- Year and Date
  2016-01-09
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] Ｘ線回折格子干渉計を用いた微小角入射小角Ｘ線散乱イメージング2016
- Author(s)
  矢代航、加藤宏祐、百生敦、池田進、和田恭雄、鈴木芳生、竹内晃久
- Organizer
  日本顕微鏡学会第72回学術講演会
- Place of Presentation
  宮城県仙台市　仙台国際センター
- Year and Date
  2016-06-14
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] 単結晶前駆合金の金属溶湯脱合金化反応およびポーラス構造発達過程2016
- Author(s)
  齋藤樹里, 加藤秀実, 和田武, 湯葢邦夫
- Organizer
  日本金属学会2016年秋期大会
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] 金属溶湯脱成分法により作製したドープナノポーラスSi の形態とリチウムイオン電池性能との関係2016
- Author(s)
  山田純平, 加藤秀実, 和田武
- Organizer
  早稲田大学ナノ・ライフ創新研究開発機構　連携協定締結記念シンポジウム
- Place of Presentation
  東北大学　金属材料研究所
- Year and Date
  2016-09-01
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] Graphitization and Activation of Open-Cell Type Porous Carbon Prepared by Dealloying in Metallic Melt2016
- Author(s)
  Won Young PARK, Hidemi KATO, Takeshi WADA, Seung-Geun YU
- Organizer
  2016 Russia-Japan Conference "Advanced Materials: Synthesis, Processing and Properties of Nanostructure
- Place of Presentation
  ロシア・ノヴォシビリスク
- Year and Date
  2016-10-30
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] Preparation of nanoporous less noble metals by solid-state interfacial dealloying reaction2016
- Author(s)
  Takeshi WADA, Kunio YUBUTA, Hidemi KATO
- Organizer
  23rd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM2016)
- Place of Presentation
  奈良
- Year and Date
  2016-07-03
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 一枚の回折格子によるGISAXS実空間イメージング ― コントラストの定量解析 ―2016
- Author(s)
  矢代航、加藤宏祐、百生敦、池田進、和田恭雄、鈴木芳生、竹内晃久
- Organizer
  平成27年度日本表面科学会東北・北海道支部講演会
- Place of Presentation
  東北大学片平キャンパス（宮城県仙台市）
- Year and Date
  2016-03-09
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] 金属ガラスのナノスケール不均質性と機械的性質2016
- Author(s)
  加藤秀実, 市坪哲
- Organizer
  日本金属学会2016年秋期大会
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Invited
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] Ｘ線回折格子干渉法による100ナノメートル以下の表面構造解析に向けて2016
- Author(s)
  矢代航、加藤宏祐、池田進、和田恭雄、鈴木芳生、竹内晃久
- Organizer
  第77回応用物理学会秋季学術講演会
- Place of Presentation
  新潟県新潟市　朱鷺メッセ
- Year and Date
  2016-09-13
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] Fe-Ni 単結晶前駆合金のMg 溶湯中での脱合金化反応およびポーラス構造発達過程2016
- Author(s)
  齋藤樹里, 和田武, 湯葢邦夫, 加藤秀実
- Organizer
  第132回金属材料研究所講演会
- Place of Presentation
  東北大学　金属材料研究所
- Year and Date
  2016-11-24
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] Preparation of nanoporous less noble metals by solid-state interfacial dealloying reaction2016
- Author(s)
  Takeshi WADA, Kunio YUBUTA, Hidemi KATO
- Organizer
  23rd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM2016)
- Place of Presentation
  奈良
- Year and Date
  2016-07-03
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] Reaction Design for Mg-Based Metallic Glass with In Situ Ti Dispersoids, and Its Development to Macro-Porous Base/Half Metals2016
- Author(s)
  Hidemi KATO, Takeshi WADA
- Organizer
  23rd International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM2016)
- Place of Presentation
  奈良
- Year and Date
  2016-07-03
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 固相脱合金化反応によるナノポーラス鉄合金の作製2016
- Author(s)
  和田　武、湯葢　邦夫、加藤　秀実
- Organizer
  2016 日本金属学会春期講演大会
- Place of Presentation
  東京理科大学
- Year and Date
  2016-03-23
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] 金属溶湯中での脱成分現象を利用した金属ガラス複合材料の作製とポーラス材料への展開2016
- Author(s)
  加藤　秀実、和田　武
- Organizer
  2016 日本金属学会春期講演大会
- Place of Presentation
  東京理科大学
- Year and Date
  2016-03-23
- Invited
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] 金属溶湯中脱成分法によるドープナノポーラスSiの作製とそのLIB負極特性2016
- Author(s)
  山田　純平、和田　武、加藤　秀実
- Organizer
  2016 日本金属学会春期講演大会
- Place of Presentation
  東京理科大学
- Year and Date
  2016-03-23
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] 金属溶湯中の脱成分現象を用いた金属ガラス複合材料の作製とポーラス金属開発への展開2016
- Author(s)
  加藤秀実, 和田武
- Organizer
  日本材料学会第２回材料WEEK
- Place of Presentation
  京都
- Year and Date
  2016-10-11
- Invited
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] Preparation of Porous Metal by Dealloying in Metallic Melt and its Application to the Binder-Free Cathode for　Rechargeable Li-Air Battery2016
- Author(s)
  Fumiya MORISHITA, Hidemi KATO, Takeshi WADA, et al
- Organizer
  The 1st International Symposium on Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development (iLIM-1)
- Place of Presentation
  大阪大学
- Year and Date
  2016-10-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] IN-PLANE SMALL-ANGLE X-RAY SCATTERING IMAGING WITH X-RAY GRATING INTERFEROMETERS2015
- Author(s)
  Wataru Yashiro, Kosuke Kato, Atsushi Momose, Susumu Ikeda, Yasuo Wada, Yoshio Suzuki, and Akihisa Takeuchi
- Organizer
  3rd international GISAS Conference (GISAS2015)
- Place of Presentation
  Mediterranean University Center (Nice, France)
- Year and Date
  2015-09-08
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] Imprinting metallic glass grating for X-Ray grating interferometers2015
- Author(s)
  M. Sadeghilaridjani, H.Kato
- Organizer
  ＩＳＭＡＮＡＭ2015
- Place of Presentation
  フランス・パリ
- Year and Date
  2015-07-13
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630341
[Presentation] Nanoporous Metals by Dealloying in Metallic Melt and Their Application for Energy2015
- Author(s)
  H. Kato
- Organizer
  ICFMFEI2015
- Place of Presentation
  ロシア・ノヴォシビリスク
- Year and Date
  2015-09-29
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] Observation of hidden β-relaxation in Zr-based metallic glasses by differential scanning2015
- Author(s)
  Y. Yamazaki, H.Kato
- Organizer
  ＩＳＭＡＮＡＭ2015
- Place of Presentation
  フランス・パリ
- Year and Date
  2015-07-13
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630341
[Presentation] 金属溶湯デアロイングにより作製したナノポーラスシリコンのリチウムイオン電池電極特性と電極体積変化の関係2015
- Author(s)
  和田　武、山田　純平、加藤　秀実
- Organizer
  2015 日本金属学会秋期講演大会
- Place of Presentation
  九州大学
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] ON PROCESSING CONDITION FOR METALLIC GLASS WITH LOW VISCOUS WORKABILITY2015
- Author(s)
  H. Kato
- Organizer
  ANMM2015
- Place of Presentation
  ルーマニア・ヤシ
- Year and Date
  2015-09-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630341
[Presentation] 回折格子を用いたGISAXSイメージング ― コントラストの定量解析2015
- Author(s)
  矢代航、加藤宏祐、百生敦、池田進、和田恭雄、鈴木芳生、竹内晃久
- Organizer
  第76回応用物理学会秋季学術講演会
- Place of Presentation
  名古屋国際会議場（愛知研名古屋市）
- Year and Date
  2015-09-13
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] 回折格子干渉計を用いた定量的GISAXSイメージング2015
- Author(s)
  矢代航、加藤宏祐、百生敦、池田進、和田恭雄、鈴木芳生、竹内晃久
- Organizer
  Optics & Photonics japan 2015 (OPJ2015)
- Place of Presentation
  筑波大学東京キャンパス（東京都文京区）
- Year and Date
  2015-10-29
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] Preparation of nanoporous silicon by dealloying in metallic melt and its application to the negative electrode for lithium-ion batteries2015
- Author(s)
  T. Wada, T. Ichitsubo, K. Yubuta, H. Segawa, H. Yoshida, H. Kato
- Organizer
  ISMANAM2015
- Place of Presentation
  フランス・パリ
- Year and Date
  2015-07-13
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 金属溶湯デアロイングにより作製したナノポーラスシリコンのリチウムイオン電池電極特性と電極体積変化の関係2015
- Author(s)
  和田　武、山田　純平、加藤　秀実
- Organizer
  2015 日本金属学会秋期講演大会
- Place of Presentation
  九州大学
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-15K06478
[Presentation] Mg金属浴でのデアロイング反応を用いたNbポーラス体作製及びキャパシタへの応用2014
- Author(s)
  金　正旭、和田　武、加藤　秀実
- Organizer
  日本金属学会2014年春期講演大会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] Mg 金属浴でのデアロイング反応を用いたNb ポーラス体作製及びキャパシタへの応用2014
- Author(s)
  金正旭, 和田武, 加藤秀実
- Organizer
  日本金属学会2014年春期講演大会
- Place of Presentation
  東京
- Year and Date
  2014-03-23
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] 溶融金属浸漬法によるNiTi のポーラス表面形成とその応用2013
- Author(s)
  上田恭介、廣橋正博、橋本龍真、和田武、加藤秀実、成島尚之
- Organizer
  SMA シンポジウム2013
- Place of Presentation
  ホテル華乃湯, 仙台
- Year and Date
  2013-11-14
- Data Source
  KAKENHI-PROJECT-24656430
[Presentation] 溶融金属浸漬法によるNiTiのポーラス表面形成とその応用2013
- Author(s)
  上田恭介、廣橋正博、橋本龍真、和田武、加藤秀実、成島尚之
- Organizer
  SMAシンポジウム2013
- Place of Presentation
  ホテル華乃湯, 仙台
- Data Source
  KAKENHI-PROJECT-24656430
[Presentation] Dealloying of NiTi by immersion in metallic melt2013
- Author(s)
 K. Ueda, M. Hirohashi, T. Narushima, T. Wada and H. Kato
- Organizer
 The 8^<th> Pacific Rim International Conference on Advanced Materials and Processing (PRICM8)
- Place of Presentation
 Hilton Waikoloa Village, Waikoloa, Hawaii, USA
- Year and Date
 2013-08-09
- Data Source
 KAKENHI-PROJECT-24656430
[Presentation] 溶融金属浸漬法によるNiTi のポーラス化と金属イオン溶出2013
- Author(s)
  上田恭介、橋本龍真、成島尚之、和田武、加藤秀実
- Organizer
  日本金属学会第152回大会(2013年春期)
- Place of Presentation
  東京理科大学, 東京
- Year and Date
  2013-03-29
- Data Source
  KAKENHI-PROJECT-24656430
[Presentation] Dynamic Study of Primary and Secondary Relaxations in Pd-Ni-Cu-P Glass2012
- Author(s)
  H. Kato
- Organizer
  International Union of Materials Research Society-International Conference in Asia 2012 (IUMRS-ICA 2012)
- Place of Presentation
  Busan, Korea
- Year and Date
  2012-08-27
- Data Source
  KAKENHI-PROJECT-20226013
[Presentation] Dynamic Study of Primary and Secondary Relaxations in Pd-Ni-Cu-P Glass, International Union of Materials Research Society ?2012
- Author(s)
  H. Kato
- Organizer
  International Conference in Asia
- Place of Presentation
  釜山(韓国)
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] 金属溶湯におけるTi-Cu合金からの脱Cu反応に及ぼす脱成分媒体および温度の影響2012
- Author(s)
  津田　雅史、和田　武、加藤　秀実
- Organizer
  日本金属学会春季大会
- Place of Presentation
  横浜
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] 前駆体構成元素間の親和性がポーラス化デアロイング反応に及ぼす影響2012
- Author(s)
  津田雅史、和田武、加藤秀実
- Organizer
  社団法人日本金属学会2012年秋期大会
- Place of Presentation
  松山市
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] 金属ガラスの動的緩和と擬弾性挙動2012
- Author(s)
  加藤秀実
- Organizer
  (社)粉体粉末冶金協会平成24年度秋季大会(招待講演)
- Place of Presentation
  草津市
- Year and Date
  2012-11-20
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] Dynamic Study of Primary and Secondary Relaxations in Pd-Ni-Cu-P Glass2012
- Author(s)
  H. Kato, H, Wang, T. Ichitsubo
- Organizer
  International Union of Materials Research Society - International Conference in Asia 2012
- Place of Presentation
  Busan, Korea
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] 溶融金属浸漬法によるNiTi からのNi 除去2012
- Author(s)
  上田恭介、廣橋正博、成島尚之、和田武、加藤秀実
- Organizer
  日本金属学会第151回大会(2012年秋期)
- Place of Presentation
  愛媛大学, 松山
- Year and Date
  2012-09-18
- Data Source
  KAKENHI-PROJECT-24656430
[Presentation] 金属ガラスの動的緩和と擬弾性挙動2012
- Author(s)
  加藤　秀実
- Organizer
  (社）粉体粉末冶金協会平成24年度秋季大会
- Place of Presentation
  草津市
- Invited
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] 金属溶融体中のデアロイング反応を用いたオープンポーラスNbの作製2012
- Author(s)
  金　正旭、和田　武、加藤　秀実
- Organizer
  日本金属学会春季大会
- Place of Presentation
  横浜
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] 金属溶湯デアロイング法によるナノポーラスチタン合金の作製2012
- Author(s)
  和田武, アルベタス・デニ・スティヤワン, 湯蓋邦夫, 加藤秀実
- Organizer
  日本金属学会2012年春期講演大会
- Place of Presentation
  横浜
- Year and Date
  2012-03-28
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] Nb ポーラス化デアロイング反応に及ぼす前駆合金および金属浴構成元素の影響2012
- Author(s)
  金正旭, 和田武, 加藤秀実
- Organizer
  日本金属学会2012年秋期講演大会
- Place of Presentation
  松山
- Year and Date
  2012-09-18
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] 金属溶融体中のデアロイング反応を用いたオープンポーラスNb の作製2012
- Author(s)
  金正旭, 和田武, 加藤秀実
- Organizer
  日本金属学会2012年春期講演大会
- Place of Presentation
  横浜
- Year and Date
  2012-03-28
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] PdNiCuP金属ガラスの動的緩和と擬弾性挙動2012
- Author(s)
  加藤　秀実
- Organizer
  日本材料学会金属ガラス部門委員会
- Place of Presentation
  京都市
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] 金属溶融体中脱成分反応を利用したTi-6Al-4V合金表面からのAl脱成分処理2012
- Author(s)
  福住　悠一、和田　武、加藤　秀実
- Organizer
  日本金属学会春季大会
- Place of Presentation
  横浜
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] PdNiCuP金属ガラスの動的緩和と擬弾性挙動2012
- Author(s)
  加藤秀実
- Organizer
  日本材料学会金属ガラス部門委員会
- Place of Presentation
  京都
- Year and Date
  2012-12-17
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] 金属溶融体中脱成分反応を利用したTi-6Al-4V合金表面からのAl 脱成分処理2012
- Author(s)
  福住悠一, 和田武, 加藤秀実
- Organizer
  日本金属学会2012年春期講演大会
- Place of Presentation
  横浜
- Year and Date
  2012-03-28
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] 前駆体構成元素間の親和性がポーラス化デアロイング反応に及ぼす影響2012
- Author(s)
  津田雅史, 和田武, 加藤秀実
- Organizer
  日本金属学会2012年秋期講演大会
- Place of Presentation
  松山
- Year and Date
  2012-09-18
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] 金属溶湯におけるTi-Cu 合金からの脱Cu 反応に及ぼす脱成分媒体および温度の影響2012
- Author(s)
  津田雅史, 和田武, 加藤秀実
- Organizer
  日本金属学会2012年春期講演大会
- Place of Presentation
  横浜
- Year and Date
  2012-03-28
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] Ｎｂポーラス化デアロイング反応に及ぼす前駆合金および金属浴構成元素の影響2012
- Author(s)
  金正旭、和田武、加藤秀実
- Organizer
  社団法人日本金属学会2012年秋期大会
- Place of Presentation
  松山市
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] 金属溶湯デアロイング法によるナノポーラスチタン合金の作製2012
- Author(s)
  和田　武、アルベタス・デニ・スティヤワン、湯蓋　邦夫、加藤　秀実
- Organizer
  日本金属学会春季大会
- Place of Presentation
  横浜
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] A Novel Preparation Method for Mg-based BMG Matrix Compposite with the In-Situ Ti Dispersoids2011
- Author(s)
  H.Oka T.Wada, H.Kato, et al
- Organizer
  TMS 2011
- Place of Presentation
  San Diego, CA, USA
- Year and Date
  2011-03-03
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] 金属溶湯中で生じるデアロイング現象を利用したナノポーラス金属の創製2011
- Author(s)
  和田　武、湯蓋　邦夫、加藤　秀実
- Organizer
  日本金属学会秋季大会
- Place of Presentation
  沖縄
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] 金属溶湯内デアロイング現象を用いた生体材料および傾斜機能材料開発2011
- Author(s)
  加藤　秀実、和田　武、廣橋　正博、上田　恭介、　成島　尚之
- Organizer
  紛体粉末冶金協会　平成２３年度秋季大会
- Place of Presentation
  大阪
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] Formation process of porous metal by dealloying in metallic melt2011
- Author(s)
  M. Tsuda, T. Wada, H. Kato
- Organizer
  The 7th International Conference on Porous Metal and Metallic Foams
- Place of Presentation
  Busan, Korea
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] Mg溶湯中におけるCu-Ti合金からのポーラスTi形成過程2011
- Author(s)
  津田　雅史、和田　武、加藤　秀実
- Organizer
  日本金属学会秋季大会
- Place of Presentation
  沖縄
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] A Novel Processing Method for Bulk Metallic Glass Composite2011
- Author(s)
  H. Oka, T. Wada, H. Kato, A. Inoue
- Organizer
  International Conference on Processing and Manufacturing of Advanced Materials
- Place of Presentation
  Quebec (Canada)
- Year and Date
  2011-08-02
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] Strain Recovery and Structural Inhomogeneity in Metallic Glass2011
- Author(s)
  H. Wang, H. Kato, A. Inoue
- Organizer
  IUMRS-ICA2011
- Place of Presentation
  Taipei (Taiwan)
- Year and Date
  2011-09-21
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] Formation process for porous metal by dealloying in metallic melt2011
- Author(s)
  Tsuda, M.; Wada, T.; Kato, H
- Organizer
  The 7th International Conference on Porous Metal and Metallic Foams
- Place of Presentation
  韓国, 釜山
- Year and Date
  2011-09-19
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] 金属溶湯内デアロイング現象を用いた生体材料および傾斜機能材料開発2011
- Author(s)
  加藤秀実, 和田武, 他
- Organizer
  粉体粉末冶金協会平成23年度秋季大会
- Place of Presentation
  大阪
- Year and Date
  2011-10-28
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] TEM/STEM直接観察によるPd基金属ガラスの局所構造解析III2011
- Author(s)
  宮内達矢, 阿部英司, 加藤秀実
- Organizer
  日本金属学会2011年秋期講演(149)大会
- Place of Presentation
  沖縄コンベンションセンター
- Year and Date
  2011-11-07
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] 金属ガラスの緩和現象2011
- Author(s)
  加藤秀実
- Organizer
  第15回日本材料学会金属ガラス部門委員会
- Place of Presentation
  京都市
- Year and Date
  2011-11-29
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] Anisothermal Creep Recovery Indicating the Structural Inhomogeneity and Relaxation Distribution2011
- Author(s)
 H.Wang, H.Kato, A.Inoue
- Organizer
 The 14^<th> International Conference on Rapidly Quenched and Metastable Materials (RQ14)
- Place of Presentation
 Salvador, Brazil
- Year and Date
 2011-08-30
- Data Source
 KAKENHI-PROJECT-22360263
[Presentation] 金属溶湯中に生じるデアロイング現象を利用したナノポーラス金属の創製2011
- Author(s)
  和田武, 湯蓋邦夫, 加藤秀実
- Organizer
  日本金属学会2011年秋期講演大会
- Place of Presentation
  沖縄
- Year and Date
  2011-11-07
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] Strain Recovery and Structural Inhomogeneity in Metallic Glass2011
- Author(s)
  H.Wang, H.Kato, A.Inonue
- Organizer
  IUMRS-ICA2011
- Place of Presentation
  Taipei, Taiwan
- Year and Date
  2011-09-21
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] A Novel Processing Method for Bulk Metallic Glass Composite2011
- Author(s)
  H.Oka, T.Wada, H.Kato, A.Inoue
- Organizer
  International Conference on Processing and Manufacturing of Advanced Materials
- Place of Presentation
  Quebec, Canada
- Year and Date
  2011-08-02
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] 金属ガラスの緩和現象2011
- Author(s)
  加藤秀実
- Organizer
  第15回日本材料学会金属ガラス部門委員会
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2011-11-29
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] New Dealloying Method for Developing Nanoporous Base Metals2011
- Author(s)
  T. Wada, M. Tsuda, K. Yubuta, H. Kato
- Organizer
  The 7th International Conference on Porous Metal and Metallic Foams
- Place of Presentation
  Busan, Korea
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] Mg 溶湯中におけるCu-Ti 合金からのポーラスTi 形成過程2011
- Author(s)
  津田雅史, 和田武, 加藤秀実
- Organizer
  日本金属学会2011年秋期講演大会
- Place of Presentation
  沖縄
- Year and Date
  2011-11-07
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] TEM/STEM直接観察によるPd基金属ガラスの局所構造解析III2011
- Author(s)
  宮内達矢阿部英司加藤秀実
- Organizer
  日本金属学会2011年秋期講演(149)大会
- Place of Presentation
  沖縄市
- Year and Date
  2011-11-07
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] SPS法によるFe基バルク金属ガラス軟磁性材料の作製2011
- Author(s)
  李雪, 久保田健, 加藤秀実, 牧野彰宏, 井上明久
- Organizer
  第121回金属材料研究所講演会(2011年春季)
- Place of Presentation
  仙台市東北大学金属材料研究所
- Year and Date
  2011-05-24
- Data Source
  KAKENHI-PROJECT-23246119
[Presentation] New Dealloying Method for Developing Nanoporaous Base Metals2011
- Author(s)
  Wada, T.; Tsuda, M.; Yubuta, K.; Kato, H
- Organizer
  The 7th International Conference on Porous Metal and Metallic Foams
- Place of Presentation
  韓国, 釜山
- Year and Date
  2011-09-19
- Data Source
  KAKENHI-PROJECT-23656422
[Presentation] SPS法によるFe基バルク金属ガラス軟磁性鉄心材料の作製2011
- Author(s)
  李雪, 加藤秀実, 牧野彰宏, 井上明久
- Organizer
  日本金属学会2011年秋期(第149回)大会
- Place of Presentation
  宜野湾市沖縄コンベンションセンター
- Year and Date
  2011-11-07
- Data Source
  KAKENHI-PROJECT-23246119
[Presentation] A Novel Preparation Method for Mg-based BMG Matrix Compposite with the In-Situ Ti Dispersoids2011
- Author(s)
  H. Oka T. Wada, H. Kato, et al
- Organizer
  TMS 2011
- Place of Presentation
  San Diego (U.S.A)
- Year and Date
  2011-03-03
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] Anisothermal Creep Recovery Indicating the Structural Inhomogeneity and RelaxationDistribution2011
- Author(s)
 H. Wang, H. Kato, A. Inoue
- Organizer
 The 14^<th> International Conference on Rapidly Quenched and Metastable Materials (RQ14)
- Place of Presentation
 Salvador(Brazil)
- Year and Date
 2011-08-30
- Data Source
 KAKENHI-PROJECT-22360263
[Presentation] Novel Preparation Method for Mg-based BMG Matrix Compposite with the In-Situ Ti Dispersoids2010
- Author(s)
  H. Oka T. Wada, H. Kato, et al
- Organizer
  MRS Fall Meeting
- Place of Presentation
  Boston (USA)
- Year and Date
  2010-12-03
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] Novel Preparation Method for Mg-based BMG Matrix Compposite with the In-Situ Ti Dispersoids2010
- Author(s)
  H.Oka T.Wada, H.Kato, et al
- Organizer
  MRS Fall Meeting
- Place of Presentation
  Boston, MA, USA
- Year and Date
  2010-12-03
- Data Source
  KAKENHI-PROJECT-22360263
[Presentation] Cooling process and cast structure of Zr-Al-Ni-Cu-Based BMGs produced in various atmospheres2010
- Author(s)
 J. Saida A. D. Setyawan, H. Kato, M. Matsushita, A. Inoue
- Organizer
 139^<th> TMS Annual Meeting
- Place of Presentation
 Seattle, USA
- Data Source
 KAKENHI-PROJECT-19360309
[Presentation] Mechanical Relaxations in Metallic Glasses2009
- Author(s)
  H.Kato
- Organizer
  The 7th International Conference on Bulk Metallic Glasses(BMGVII)
- Place of Presentation
  Busan, Korea
- Year and Date
  2009-11-05
- Data Source
  KAKENHI-PROJECT-20226013
[Presentation] Mechanical properties of dynamic nanostructure controlled Zr-Al-Ni-Cu-based bulk metallic glasses2009
- Author(s)
  J. Saida, A. D. Setyawan, H. Kato, A. Inoue
- Organizer
  International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2009
- Place of Presentation
  Berlin, Germany
- Data Source
  KAKENHI-PROJECT-19360309
[Presentation] Dynamic α-&β-Relaxations in Metallic Glasses2009
- Author(s)
  H.Kato
- Organizer
  The International Discussion Meeting on Relaxations in Complex Systems
- Place of Presentation
  Rome, Italy
- Year and Date
  2009-09-02
- Data Source
  KAKENHI-PROJECT-20226013
[Presentation] 動的粘弾性測定結果に基づく金属ガラスの高温圧縮変形挙動の考察2008
- Author(s)
  加藤秀実
- Organizer
  日本金属学会2008年秋期(第143回)
- Place of Presentation
  熊本大学黒髪キャンパス
- Year and Date
  2008-09-24
- Data Source
  KAKENHI-PROJECT-20226013
[Presentation] Temperature dependence of the yield strain of a Zr-based metallic glass at the glassy state2007
- Author(s)
  H. Kato, H. Igarashi, A. Inoue
- Organizer
  ISMANAM2007
- Place of Presentation
  コルフギリシャ
- Year and Date
  2007-08-29
- Data Source
  KAKENHI-PROJECT-18029003
[Presentation] Another key to understand the yield phenomenon in a Zr-based bulk metallic glass2007
- Author(s)
  H. Kato, H. Igarashi, A. Inoue
- Organizer
  MRS Fall 2007
- Place of Presentation
  ボストンアメリカ合衆国
- Year and Date
  2007-11-29
- Data Source
  KAKENHI-PROJECT-18029003
[Presentation] Implication of the thermal expansion coefficient on Tg in metallic glass2007
- Author(s)
  H. Kato, H. S. Chen, A. Inoue
- Organizer
  The 2nd International Workshop on NANO and Amorphous Materials
- Place of Presentation
  仁川韓国
- Year and Date
  2007-12-13
- Data Source
  KAKENHI-PROJECT-18029003
[Presentation] Glass formation dependence on casting atmosphere in Zr-Al-Ni-Cu-Pd alloy system2007
- Author(s)
  H. Kato, A. D. Setyawan, J. Saida, A. Inoue
- Organizer
  Japan-Korea Asian Core Program 第3回日韓金属ガラスワークショップ
- Place of Presentation
  宮城蔵王ロイヤルホテル
- Year and Date
  2007-09-27
- Data Source
  KAKENHI-PROJECT-18029003
[Presentation] Development of Mg-based Bulk Metallic Glass and its composite2007
- Author(s)
  H. Kato, M. Kinaka, A. Inoue
- Organizer
  Workshop on Advanced Magnesium Alloys and Their Applications
- Place of Presentation
  上海交通大学(中国)
- Year and Date
  2007-08-02
- Data Source
  KAKENHI-PROJECT-18029003
[Presentation] Zr基金属ガラスの降伏現象の温度依存性について2007
- Author(s)
  加藤秀実, 五十嵐仁, 井上明久
- Organizer
  粉体粉末冶金協会平成19年度春季大会
- Place of Presentation
  早稲田大学国際会議場
- Year and Date
  2007-06-06
- Data Source
  KAKENHI-PROJECT-18029003
[Presentation] 金属ガラスの降伏歪の温度依存性と合金系による変化2007
- Author(s)
  加藤秀実, 五十嵐仁
- Organizer
  日本金属学会2007年秋期大会
- Place of Presentation
  岐阜大学
- Year and Date
  2007-09-19
- Data Source
  KAKENHI-PROJECT-18029003
[Presentation] 金属溶湯脱成分法を用いて作製した多孔質Fe-Crの多孔質構造に及ぼす添加元素の効果
- Author(s)
  津田雅史、和田武、加藤秀実
- Organizer
  日本金属学会2014年秋期講演大会（１５５回）
- Place of Presentation
  名古屋大学東山キャンパス
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 金属溶湯中脱成分法による三次元ナノポーラスシリコンの作製とそのリチウムイオン電池負極特性
- Author(s)
  和田武、市坪哲、湯葢邦夫、瀬川春彦、吉田浩一、加藤秀実
- Organizer
  第５５回電池討論会
- Place of Presentation
  国立京都国際会館
- Year and Date
  2014-11-19 – 2014-11-21
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] Viscosity and thermal stability of Gd based metallic glasses
- Author(s)
  Maryam Sadeghilaridjani, H. Kato
- Organizer
  日本金属学会2014年秋季講演大会（第155回）
- Place of Presentation
  名古屋大学
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PROJECT-26630341
[Presentation] 一枚の位相型回折格子を用いたGIUSAXS実空間イメージング
- Author(s)
  矢代航、加藤宏祐、池田進、和田恭雄、鈴木芳生、竹内晃久
- Organizer
  第62回応用物理学春季学術講演会
- Place of Presentation
  平塚
- Year and Date
  2015-03-11 – 2015-03-14
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] Gd based metallic glass grating
- Author(s)
  Maryam SADEGHILARIDJANI, H.Kato
- Organizer
  Japan-Russia Joint Seminar "Advanced Materials Synthesis Process and Nanostructure"
- Place of Presentation
  仙台・ホテル華の湯
- Year and Date
  2015-03-09 – 2015-03-10
- Data Source
  KAKENHI-PROJECT-26630341
[Presentation] 一枚の回折格子によるGISAXS実空間イメージング
- Author(s)
  矢代航、加藤宏祐、池田進、和田恭雄、鈴木芳生、竹内晃久
- Organizer
  平成26年度日本表面科学会東北・北海道支部学術講演会
- Place of Presentation
  札幌
- Year and Date
  2015-03-09 – 2015-03-10
- Data Source
  KAKENHI-PROJECT-26600137
[Presentation] 金属溶湯脱成分法を用いた3Dバルクポーラス黒鉛の作製
- Author(s)
  兪承根、和田武、加藤秀実
- Organizer
  日本金属学会2014年秋期講演大会（１５５回）
- Place of Presentation
  名古屋大学東山キャンパス
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 金属溶湯デアロイングによるナノポーラスシリコンの構造制御とそのリチウムイオン二次電池特性
- Author(s)
  和田武、加藤秀実
- Organizer
  日本金属学会春期講演大会２０１５
- Place of Presentation
  東京大学駒場キャンパス
- Year and Date
  2015-03-18 – 2015-03-20
- Data Source
  KAKENHI-PROJECT-25246009
[Presentation] 金属溶湯デアロイングによるポーラスシリコンの作製とそのリチウムイオン電池負極特性
- Author(s)
  和田武、市坪哲、湯葢邦夫、瀬川春彦、吉田浩一、加藤秀実
- Organizer
  日本金属学会2014年秋期講演大会（１５５回）
- Place of Presentation
  名古屋大学東山キャンパス
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PROJECT-25246009

1. WADA Takeshi (10431602)

# of Collaborated Projects: 9 results

# of Collaborated Products: 220 results
2. SAIDA Junji (20359540)

# of Collaborated Projects: 2 results

# of Collaborated Products: 11 results
3. TAKEUCHI Akira (40250815)

# of Collaborated Projects: 2 results

# of Collaborated Products: 1 results
4. ZHANG Wei (20400400)

# of Collaborated Projects: 2 results

# of Collaborated Products: 1 results
5. ICHITSUBO Tetsu (40324826)

# of Collaborated Projects: 2 results

# of Collaborated Products: 15 results
6. YUBUTA Kunio (00302208)

# of Collaborated Projects: 2 results

# of Collaborated Products: 7 results
7. Yashiro Wataru (10401233)

# of Collaborated Projects: 2 results

# of Collaborated Products: 15 results
8. INUI HARUYUKI (30213135)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
9. 尾方成信 (20273584)

# of Collaborated Projects: 2 results

# of Collaborated Products: 1 results
10. 辻伸泰 (30263213)

# of Collaborated Projects: 2 results

# of Collaborated Products: 3 results
11. 古原忠 (50221560)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
12. 小山敏幸 (80225599)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
13. 奥川将行 (70847160)

# of Collaborated Projects: 2 results

# of Collaborated Products: 3 results
14. INOUE Akihisa (10108566)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
15. CHEN Mingwei (20372310)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
16. KIMURA Hisamichi (00161571)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. LOUZGUINE Dmitri (60302212)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. ABE Eiji (70354222)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
19. MAKINO Akihiro (30315642)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
20. YOKOYAMA Yoshihiko (00261511)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. YODOSHI Noriharu (60586494)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. KUBOTA Takeshi (70400405)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
23. UEDA Kyosuke (40507901)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
24. NARUSHIMA Takayuki (20198394)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
25. YAMASAKI Tohru (30137252)

# of Collaborated Projects: 1 results

# of Collaborated Products: 7 results
26. 北條大介 (30511919)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. 足立大樹 (00335192)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
28. 網谷健児 (30463798)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
29. 三浦永理 (70315258)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. 藤田和孝 (10156862)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
31. 武藤浩行 (20293756)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
32. 武藤泉 (20400278)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
33. 佐々木拓也 (70815787)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. ガイダニコアレキサンダー (70837559)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
35. 西山宣正 (10452682)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
36. 譯田真人 (00550203)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
37. 新山友暁 (00583858)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
38. 佐藤成男 (40509056)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
39. 山田類 (40706892)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
40. MARY Nicolas (90794397)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
41. 小川和洋 (50312616)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
42. 高梨弘毅 (00187981)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
43. 窪田崇秀 (00580341)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
44. 鈴木和也 (20734297)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
45. 魏代修 (20785810)

# of Collaborated Projects: 1 results

# of Collaborated Products: 12 results
46. SONG RUIRUI (20975429)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
47. ZHANG DEPING

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
48. TSURU Tomohito

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results
49. 嶋田雄介

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results
50. JIANG JING

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results
51. 松原英一郎

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results
52. 服部正

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

katou hidemi 加藤 秀実

KATO Hidemi 加藤 秀実

Research Projects

Research Products

Co-Researchers

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

相分離する異種金属のデアロイング接合Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Creation of new materials and functions based on high entropy effectPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Ｍｇ－希土類結晶および非晶質合金の作製とその力学特性調査Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development large-area and high aspect ratio metallic glass gratings for Talbot-Lau interferometerPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of open-cell type nanoporous silicon for long lifetime and high capacity lithium secondary battery electrodePrincipal Investigator

katou hidemi 加藤秀実

KATO Hidemi 加藤秀実

[Book] 全固体電池のイオン伝導性向上技術と材料、製造プロセスの開発第7章1節 251貢－257貢2017