Maeno Tomoyoshi 前野智美

… Alternative Names

MAENO Tomoyoshi 前野智美

Less

Researcher Number	80505397
Other IDs
Affiliation (Current)	2025: 横浜国立大学, 大学院工学研究院, 准教授
Affiliation (based on the past Project Information) *help	2025: 横浜国立大学, 大学院工学研究院, 准教授 2016 – 2023: 横浜国立大学, 大学院工学研究院, 准教授 2015: 横浜国立大学, 工学(系)研究科(研究院), 准教授 2013 – 2014: 豊橋技術科学大学, 工学(系)研究科(研究院), 助教 2010 – 2011: 豊橋技術科学大学, 大学院・工学研究科, 助手 2009: 豊橋技術科学大学, 工学部, 助手
Review Section/Research Field	Principal Investigator Basic Section 26050:Material processing and microstructure control-related / Basic Section 18020:Manufacturing and production engineering-related / Production engineering/Processing studies / Material processing/Microstructural control engineering / Material processing/treatments Except Principal Investigator Basic Section 26050:Material processing and microstructure control-related / Material processing/treatments
Keywords	Principal Investigator 焼付き / サーボプレス / 再潤滑 / 潤滑 / 振動 / 塑性加工 / 加工硬化 / ねじり変形 / 電気塑性 / 水冷 … More / チタン / アルミニウム / せん断応力 / 圧縮 / ねじり / 熱軟化 / 軟化 / 変形抵抗 / ジュール発熱 / 電気塑性効果 / 析出 / 曲げ / 人工時効 / 深絞り / 7000系 / 加熱時間 / 時効 / プレス成形 / 接触加熱 / 人口時効 / 溶体化処理 / ホットスタンピング / アルミニウム合金 / 油溜り / 先端くぼみ / スライドモーション / 焼付き防止 / 自動再潤滑 / せん断 / ボンデ処理 / リン酸塩皮膜処理 / 鍛造 / 高密度化 / 高強度化 / 焼付き抑制 / 粉末固化 / 強加工 / 圧粉成形 / 摩擦 / 最潤滑 / 荷重振動 / 荷重低減 / 高精度 / 摩擦低減 / 板鍛造 … More Except Principal Investigator 高生産性 / 高強度部と高延性 / 冷却履歴部分制御 / 部分増肉 / 冷却履歴 / 冷却履歴制御 / テーラード / ホットスタンピング / 電極材質 / 表面性状向上 / 通電加熱 / 局部加熱 / せん断加工 / 荷重低減 / 低加熱エネルギー / 小穴抜き加工 / ダイクエンチされた鋼板 / 金型寿命向上 / 切口面性状向上 / 低加熱エネルギー荷重低減 / 急速加熱 / 局部通電加熱 / 穴抜き加工 / 超高張力鋼板 Less

接触電気抵抗を用いた塑性加工における潤滑膜厚変化解析と凝着検出Principal Investigator
- Principal Investigator
  
  前野智美
- Project Period (FY)
  2025 – 2027
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Yokohama National University
Verification of electroplastic effect and its mechanism under uniform current density using torsional deformationPrincipal Investigator
- Principal Investigator
  
  MAENO TOMOYOSHI
- Project Period (FY)
  2021 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Yokohama National University
Development of hot stamping of age-hardened aluminium alloy sheet using contact heating without solution heat treatmentPrincipal Investigator
- Principal Investigator
  
  Maeno Tomoyoshi
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Yokohama National University
Development of tailored hot stamping having high productivity using partial control of cooling history
- Principal Investigator
  
  MORI KEN-ICHIRO
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Toyohashi University of Technology
Development of environmentally benign lubrication system using liquid lubricant with pulsating slide motion of servo pressPrincipal Investigator
- Principal Investigator
  
  Maeno Tomoyoshi
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Yokohama National University
Consolidation by severe plastic deformation in compaction of magnetic powder cores and bonded magnetsPrincipal Investigator
- Principal Investigator
  
  MAENO Tomoyoshi
- Project Period (FY)
  2013 – 2014
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Toyohashi University of Technology
Investigation of mechanism of load pulsation, and applying for forming of parts having small thicknessPrincipal Investigator
- Principal Investigator
  
  MAENO Tomoyoshi
- Project Period (FY)
  2010 – 2011
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
Development of shearing process of ultra-high strength steel sheets using local resistance heating
- Principal Investigator
  
  MORI Kenichiro
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology

All 2022 2021 2020 2019 2018 2017 2016 2015 2014 2012 2011 2010 Other

All Journal Article Presentation Patent

[Journal Article] Quenchability improvement and control simplification by ice mandrel in hot stamping of ultra-high strength steel hollow parts2021
- Author(s)
  Talebi-Anaraki Ali、Maeno Tomoyoshi、Ikeda Ryohei、Morishita Kazui、Mori Ken-ichiro
- Journal Title
  
  Journal of Manufacturing Processes
  
  Volume: 64 Pages: 916-926
- DOI
  10.1016/j.jmapro.2021.02.037
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18H01749
[Journal Article] Minimisation of Heating Time for Full Hardening in Hot Stamping Using Direct Resistance Heating2020
- Author(s)
  Maeno Tomoyoshi、Mori Ken-ichiro、Sakagami Masato、Nakao Yoshitaka、Talebi-Anaraki Ali
- Journal Title
  
  Journal of Manufacturing and Materials Processing
  
  Volume: 4 Issue: 3 Pages: 80-80
- DOI
  10.3390/jmmp4030080
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01749
[Journal Article] Delayed cracking in hot stamping with hot trimming for ultra-high strength steel components2019
- Author(s)
  Yuki Nakagawa, Ken-ichiro Mori, Tomoyoshi Maeno, Ryo Umemiya
- Journal Title
  
  International Journal of Advanced Manufacturing Technology
  
  Volume: 105 Issue: 12 Pages: 5081-5090
- DOI
  10.1007/s00170-019-04599-w
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18H01749
[Journal Article] サーボプレスを活用した低サイクル振動モーションを用いた自動再潤滑2018
- Author(s)
  前野智美
- Journal Title
  
  プレス技術
  
  Volume: 56 Pages: 70-74
- Data Source
  KAKENHI-PROJECT-15K05720
[Journal Article] Use of liquid lubricant for backward extrusion of cup with internal splines using pulsating motion2017
- Author(s)
  T. Maeno, K. Mori, Y. Ichikawa, M. Sugawara
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 244 Pages: 273-281
- DOI
  10.1016/j.jmatprotec.2017.02.001
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K05720
[Journal Article] Punching of small hole of die-quenched steel sheets using local resistance heating2012
- Author(s)
  K.Mori, T.Maeno, Y.Maruo
- Journal Title
  
  CIRP Annals-Manufacturing Technology
  
  Volume: 61(印刷中)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] Punching of ultra-high strength steel sheets using local resistance heating of shearing zone2012
- Author(s)
  K.Mori, T.Maeno, S.Fuzisaka
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 212 Issue: 2 Pages: 534-540
- DOI
  10.1016/j.jmatprotec.2011.10.021
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] Punching of small hole of die-quenched steel sheets using local resistance heating2012
- Author(s)
  K. Mori, T. Maeno, Y. Maruo
- Journal Title
  
  CIRP Annals. Manufacturing Technology
  
  Volume: 61-2
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] Punching of ultra-high strength steel sheets using local resistance heating of shearing zone2012
- Author(s)
  K. Mori, T. Maeno, S. Fuzisaka
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 212-2 Pages: 534-540
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] ダイクエンチされた鋼板の局部通電加熱小穴抜き加工2011
- Author(s)
  森謙一郎, 丸尾佳広, 前野智美
- Journal Title
  
  塑性と加工
  
  Volume: 52 Pages: 1114-1118
- NAID
  10029483857
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] Reduction of Friction in Compression of Plates by Load Pulsation2011
- Author(s)
  T. Maeno, K. Osakada, K. Mori
- Journal Title
  
  International Journal of Machine Tools & Manufacture
  
  Volume: 51-7-8 Pages: 612-617
- Data Source
  KAKENHI-PROJECT-22760555
[Journal Article] バイパス通電加熱を用いたプレス成形による強度分布を有する超高張力鋼成形品の製造2011
- Author(s)
  森謙一郎, Kittikul Mongkolkaji, 前野智美, 内田光隆, 上薗俊, 林貴文, 野田篤志
- Journal Title
  
  塑性と加工
  
  Volume: 52 Pages: 801-805
- NAID
  10029130227
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] ダイクエンチされた鋼板の局部通電加熱を用いた温・熱間小穴抜き加工2010
- Author(s)
  前野智美, 丸尾佳広, 森謙一郎, 島田正美, 矢野洋
- Journal Title
  
  平成22年度塑性加工春季講演会講演論文集
  
  Pages: 115-116
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] 超高張力鋼板の局部通電加熱穴抜き加工2010
- Author(s)
  森謙一郎, 藤阪靖二, 内田光隆, 上薗俊, 前野智美
- Journal Title
  
  塑性と加工 (日本塑性加工学会誌) 51巻
  
  Pages: 55-59
- NAID
  10025875931
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Patent] アルミニウム合金の成形方法2018
- Inventor(s)
  前野智美，谷口俊哉，山田壮一，
- Industrial Property Rights Holder
  株式会社ジーテクト
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2018-086393
- Filing Date
  2018
- Data Source
  KAKENHI-PROJECT-18K04772
[Patent] アルミニウム合金の成形方法2018
- Inventor(s)
  前野智美，谷口俊哉，齋藤拓己，飛田夏葵
- Industrial Property Rights Holder
  株式会社ジーテクト
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2018-188033
- Filing Date
  2018
- Data Source
  KAKENHI-PROJECT-18K04772
[Patent] アルミニウム合金の成形方法2018
- Inventor(s)
  前野智美，谷口俊哉，齋藤拓己，飛田夏葵
- Industrial Property Rights Holder
  株式会社ジーテクト
- Industrial Property Rights Type
  特許
- Filing Date
  2018
- Acquisition Date
  2020
- Data Source
  KAKENHI-PROJECT-18K04772
[Presentation] 純アルミニウムのねじりを用いた電気塑性効果発現の検証2022
- Author(s)
  前野智美，金田晋弥，大塚美海，戸坂浩輔
- Organizer
  2022年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-21K03803
[Presentation] 熱処理型アルミニウム合金のホットスタンピング2019
- Author(s)
  前野　智美
- Organizer
  日本塑性加工学会　残留応力研究部会
- Invited
- Data Source
  KAKENHI-PROJECT-18K04772
[Presentation] A7075アルミニウム合金の後人口時効レスホットスタンピングにおける加熱条件が硬さと成形性に及ぼす影響2018
- Author(s)
  前野智美，齋藤拓己，飛田夏葵，森謙一郎，谷口俊哉
- Organizer
  平成30年度　塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-18K04772
[Presentation] 時効硬化されたA7075アルミニウム合金板の短時間加熱を用いた後人口時効レスホットスタンピングによるV曲げ成形2018
- Author(s)
  前野智美，飛田夏葵，齋藤拓己，森謙一郎，谷口俊哉
- Organizer
  第69回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-18K04772
[Presentation] ステンレス厚鋼板の穴抜き加工における振動モーションを用いたせん断面品質向上2016
- Author(s)
  前野智美, 菅原稔, 森謙一郎
- Organizer
  平成28年度　塑性加工春期講演会
- Place of Presentation
  京都工芸繊維大学　松ヶ崎キャンパス
- Year and Date
  2016-05-20
- Data Source
  KAKENHI-PROJECT-15K05720
[Presentation] サーボプレスを用いた振動後方押出しによる内スプライン成形品の表面性状の向上2015
- Author(s)
  前野智美,菅原稔, 森謙一郎
- Organizer
  平成27年度　塑性加工春期講演会
- Place of Presentation
  慶應義塾大学　矢上キャンパス
- Year and Date
  2015-05-29
- Data Source
  KAKENHI-PROJECT-15K05720
[Presentation] 摩擦援用および背圧付加押出しによるNd-Fe-B磁性粉末の高密度化2014
- Author(s)
  前野　智美，　谷口　俊哉，　森謙一郎
- Organizer
  平成26年度塑性加工春季講演会
- Place of Presentation
  つくば国際会議場
- Data Source
  KAKENHI-PROJECT-25820368
[Presentation] ほか,板鍛造における荷重振動を用いたステンレス鋼部品の段差付け加工2011
- Author(s)
  前野智美
- Organizer
  日本塑性加工学会平成23年度塑性加工春季講演会
- Place of Presentation
  早稲田大学
- Year and Date
  2011-05-28
- Data Source
  KAKENHI-PROJECT-22760555
[Presentation] 板鍛造における荷重振動を用いたステンレス鋼部品の段差付け加工2011
- Author(s)
  前野智美, ほか
- Organizer
  日本塑性加工学会平成23年度塑性加工春季講演会
- Place of Presentation
  早稲田大学
- Year and Date
  2011-05-28
- Data Source
  KAKENHI-PROJECT-22760555
[Presentation] サーボプレスを用いた摩擦を低減する荷重振動鍛造2011
- Author(s)
  前野智美
- Organizer
  TECH Biz EXPO2011大学若手研究者シーズ発表会
- Place of Presentation
  ポートメッセなごや
- Year and Date
  2011-10-20
- Data Source
  KAKENHI-PROJECT-22760555
[Presentation] せん断・成形・ダイクエンチを一体化した1ショットホットスタンピング2011
- Author(s)
  山田弘明,森謙一郎,前野智美,家田和典
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  ホテル日航豊橋
- Year and Date
  2011-10-27
- Data Source
  KAKENHI-PROJECT-21360360
[Presentation] サーボプレスを用いた摩擦を低減する荷重振動鍛造2011
- Author(s)
  前野智美
- Organizer
  日本塑性加工学会プロセス・トライボロジー分科会132回研究会
- Place of Presentation
  大阪大学
- Year and Date
  2011-12-06
- Data Source
  KAKENHI-PROJECT-22760555
[Presentation] サーボプレスを用いた摩擦を低減する荷重振動鍛造2011
- Author(s)
  前野智美
- Organizer
  TECH Biz EXPO 2011大学若手研究者シース発表会
- Place of Presentation
  ポートメッセなごや
- Year and Date
  2011-10-20
- Data Source
  KAKENHI-PROJECT-22760555
[Presentation] 板歯車のホットブラシキング・ダイクエンチ2011
- Author(s)
  前野智美, 山田弘明, 森謙一郎
- Organizer
  平成23年度塑性加工春季講演会
- Place of Presentation
  早稲田大学
- Year and Date
  2011-05-29
- Data Source
  KAKENHI-PROJECT-21360360
[Presentation] ダイクエンチ鋼板の局部通電加熱小穴抜き加工2011
- Author(s)
  森謙一郎,丸尾佳広,前野智美
- Organizer
  平成23年度塑性加工春季講演会
- Place of Presentation
  早稲田大学
- Year and Date
  2011-05-29
- Data Source
  KAKENHI-PROJECT-21360360
[Presentation] 摩擦援用および背圧付加押出しによるNd-Fe-B磁性粉末の高結合化
- Author(s)
  前野智美, 谷口俊哉，森謙一郎
- Organizer
  平成26年度塑性加工春季講演会
- Place of Presentation
  つくば国際会議場
- Year and Date
  2014-06-06 – 2014-06-08
- Data Source
  KAKENHI-PROJECT-25820368
[Presentation] 強加工圧粉によるNd-Fe-B円筒ボンド磁石の強度向上
- Author(s)
  前野智美，谷口俊哉，森謙一郎
- Organizer
  平成27年度塑性加工春季講演会
- Place of Presentation
  慶應義塾大学　矢上キャンパス
- Year and Date
  2015-05-29 – 2015-05-31
- Data Source
  KAKENHI-PROJECT-25820368

1. MORI Kenichiro (80127167)

# of Collaborated Projects: 4 results

# of Collaborated Products: 18 results
2. ABE Yohei (60402658)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. OSAKADA Kozo (50031109)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
4. 中川佑貴 (50837739)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
5. NAKAMURA Akihro

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. HORI Ayumi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. ICHIKAWA Yuki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Maeno Tomoyoshi 前野 智美

MAENO Tomoyoshi 前野 智美

Research Projects

Research Products

Co-Researchers

接触電気抵抗を用いた塑性加工における潤滑膜厚変化解析と凝着検出Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Verification of electroplastic effect and its mechanism under uniform current density using torsional deformationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of hot stamping of age-hardened aluminium alloy sheet using contact heating without solution heat treatmentPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of tailored hot stamping having high productivity using partial control of cooling history

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of environmentally benign lubrication system using liquid lubricant with pulsating slide motion of servo pressPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Consolidation by severe plastic deformation in compaction of magnetic powder cores and bonded magnetsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Investigation of mechanism of load pulsation, and applying for forming of parts having small thicknessPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of shearing process of ultra-high strength steel sheets using local resistance heating

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Quenchability improvement and control simplification by ice mandrel in hot stamping of ultra-high strength steel hollow parts2021

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Minimisation of Heating Time for Full Hardening in Hot Stamping Using Direct Resistance Heating2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Delayed cracking in hot stamping with hot trimming for ultra-high strength steel components2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] サーボプレスを活用した低サイクル振動モーションを用いた自動再潤滑2018

Author(s)

Journal Title

Data Source

[Journal Article] Use of liquid lubricant for backward extrusion of cup with internal splines using pulsating motion2017

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Punching of small hole of die-quenched steel sheets using local resistance heating2012

Author(s)

Journal Title

Maeno Tomoyoshi 前野智美

MAENO Tomoyoshi 前野智美