Kono Daisuke 河野大輔

… Alternative Names

KONO Daisuke 河野大輔

Less

Researcher Number	80576504
Other IDs
Affiliation (Current)	2025: 京都大学, 工学研究科, 准教授
Affiliation (based on the past Project Information) *help	2025: 京都大学, 工学研究科, 准教授 2017 – 2023: 京都大学, 工学研究科, 准教授 2012 – 2015: 京都大学, 工学(系)研究科(研究院), 助教 2011: 京都大学, 大学院・工学研究科, 助教
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related Except Principal Investigator Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related / Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
Keywords	Principal Investigator 工作機械 / 接触剛性 / 画像計測 / 減衰性 / マイクロX線CT / 滑り / 弾塑性変形 / 光弾性法 / X線CT / 接触減衰 … More / 精密部品加工 / 機械工作・生産工学 / 切削加工 / 振動 / 自働化 / 機上計測 / 動剛性 / 低剛性工作物 / 位置依存性 / 方向依存性 / 振動特性 / 俯瞰的評価 / コンプライアンス / 動特性 / マウント … More Except Principal Investigator 工作機械 / 切削加工 / テクスチャリング / 光弾性法 / トライボロジー / 超音波加工 / 旋盤加工 / バイオミメティクス / マイクロテクスチャ / モジュール型 / AGV / 生産ライン / フレキシブル / ダイナミックケイパビリティ / 生産システム / 動剛性 / 切削工学 / 切削力 / 実時間シミュレーション / 切削抵抗 / 加振装置 / エンドミル / 分岐現象 / 動特性 / びびり振動 / 加振 / 振動モード / 制御 / 自励振動 / 切削 / 除振・制振 / サーボ系 / マイクロ・ナノ加工 / 振動制御 Less

不確かさ評価に基づく工作機械の画像計測・位置制御システム実現の方法論Principal Investigator
- Principal Investigator
  
  河野大輔
- Project Period (FY)
  2025 – 2027
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kyoto University
Rapid Generation and Sliding Characteristics of Aligned Microtextures by Phase-Controlled Ultrasonic Cutting
- Principal Investigator
  
  Isobe Hiromi
- Project Period (FY)
  2021 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Nagaoka University of Technology
Reconstruction of contact model and design method of contact surface geometry by direct measurement of deformation behavior on metal contact surfacesPrincipal Investigator
- Principal Investigator
  
  Kono Daisuke
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kyoto University
Machine tools based on inovation of design and informatics
- Principal Investigator
  
  Sugita Naohiko
- Project Period (FY)
  2019 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Review Section
  
  Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
- Research Institution
  The University of Tokyo
Machining process for thin-walled workpiece using on-machine measurement of workpiece dynamic stiffnessPrincipal Investigator
- Principal Investigator
  
  Kono Daisuke
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kyoto University
Analysis of self-excited chatter with mode coupling using real-time simulation of cutting process
- Principal Investigator
  
  Matsubara Atsushi
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kyoto University
Evaluation of vibration characteristic of machine tools using measuring system for three-dimensional compliancePrincipal Investigator
- Principal Investigator
  
  Kono Daisuke
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kyoto University
Design of machine tool supports based on analysis of contact stiffnessPrincipal Investigator
- Principal Investigator
  
  KONO DAISUKE
- Project Period (FY)
  2012 – 2013
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kyoto University
Design method to control ground vibration and direct vibrations for micro-nano machine tools
- Principal Investigator
  
  MATSUBARA Atsushi
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kyoto University

All 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2013 2012 2011 2009 Other

All Journal Article Presentation

[Journal Article] Analysis of tangential contact damping mechanism by direct observation using X-ray computed tomography2022
- Author(s)
  Kono Daisuke、Yamazaki Taisuke、Ishii Tomohiro、Kimura Masao
- Journal Title
  
  CIRP Annals
  
  Volume: 71 Issue: 1 Pages: 485-488
- DOI
  10.1016/j.cirp.2022.04.027
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02046
[Journal Article] Rolling resistance model for estimation of friction fluctuation in linear ball guideways2022
- Author(s)
  Daisuke Kono, Tomoyuki Osumi
- Journal Title
  
  Precision Engineering
  
  Volume: 75 Pages: 46-54
- DOI
  10.1016/j.precisioneng.2022.01.008
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H00735
[Journal Article] Holistic multi-scale model of contact stiffness considering subsurface deformation2021
- Author(s)
  Kono Daisuke、Jorobata Yuki、Isobe Hiromi
- Journal Title
  
  CIRP Annals
  
  Volume: 70 Issue: 1 Pages: 447-450
- DOI
  10.1016/j.cirp.2021.04.030
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-21H01225, KAKENHI-PROJECT-20H02046
[Journal Article] Cutter mark cross method for improvement of contact stiffness by controlling distribution of real contact area2020
- Author(s)
  Jorobata Yuki,Kono Daisuke
- Journal Title
  
  Precision Engineering
  
  Volume: 63 Pages: 197-205
- DOI
  10.1016/j.precisioneng.2020.03.001
- NAID
  120006817457
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H02046
[Journal Article] Thermal error and energy-saving performance evaluation of the energy-saving machine tool using new structural materials2020
- Author(s)
  加藤慎，河野大輔，吉岡勇人，杉田直彦，浜口顕秀，高野和雅, 飯島一憲，柿沼康弘
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 86 Issue: 884 Pages: 20-00002-20-00002
- DOI
  10.1299/transjsme.20-00002
- NAID
  130007835949
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H00735
[Journal Article] On-machine measurement method for dynamic stiffness of thin-walled workpieces2019
- Author(s)
  Kono Daisuke、Umezu Takuma
- Journal Title
  
  Precision Engineering
  
  Volume: 60 Pages: 299-305
- DOI
  10.1016/j.precisioneng.2019.08.015
- NAID
  120006731196
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06078
[Journal Article] Machining Process for a Thin-Walled Workpiece Using On-Machine Measurement of the Workpiece Compliance2019
- Author(s)
  Umezu Takuma、Kono Daisuke
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 13 Issue: 5 Pages: 631-638
- DOI
  10.20965/ijat.2019.p0631
- NAID
  130007703283
- ISSN
  1881-7629, 1883-8022
- Year and Date
  2019-09-05
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06078
[Journal Article] Influence of contact condition between flexible plate and passive pivot support on machining vibration2018
- Author(s)
  Atsushi Matsubara, Hiroaki Nagai, Nils Knorr, Daisuke Kono
- Journal Title
  
  Procedia CIRP
  
  Volume: 77 Pages: 557-560
- DOI
  10.1016/j.procir.2018.08.225
- NAID
  120006726171
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03157
[Journal Article] Evaluation of on-machine measuring method for dynamic stiffness of thin-walled workpieces2018
- Author(s)
  Umezu Takuma、Kono Daisuke、Matsubara Atsushi
- Journal Title
  
  Procedia CIRP
  
  Volume: 77 Pages: 34-37
- DOI
  10.1016/j.procir.2018.08.204
- NAID
  120006695758
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06078
[Journal Article] Investigation on Direction Dependency of Tool-Workpiece Compliance of Machine tool2016
- Author(s)
  Daisuke Kono, Atsushi Matsubara
- Journal Title
  
  Procedia CIRP
  
  Volume: 印刷中
- NAID
  120006654076
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26820021
[Journal Article] Stiffness model of machine tool supports using contact stiffness2013
- Author(s)
  Daisuke Kono, Takahiro Inagaki, Atsushi Matsubara, and Iwao Yamaji
- Journal Title
  
  Precision Engineering
  
  Volume: Vol.37, Issue 3 Issue: 3 Pages: 650-657
- DOI
  10.1016/j.precisioneng.2013.01.010
- NAID
  120005244915
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24760104
[Journal Article] Measurement of Contact Stiffness for Stiffness Estimation of Machine Tool Supports2012
- Author(s)
  Daisuke Kono, Takahiro Inagaki, Atsushi Matsubara, and Iwao Yamaji
- Journal Title
  
  Key Engineering Materials
  
  Volume: Vols. 523-524 Pages: 457-462
- DOI
  10.4028/www.scientific.net/kem.523-524.457
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24760104
[Journal Article] Analysis method for investigating the influence of mechanical components on dynamic mechanical error of machine tools2012
- Author(s)
  D. Kono, A. Matsubara, K. Nagaoka, K. Yamazaki
- Journal Title
  
  Precision Engineering
  
  Volume: Vol.36 Pages: 477-484
- Data Source
  KAKENHI-PROJECT-21560121
[Journal Article]2011
- Author(s)
  河野大輔, 松原厚, 岡田琢巳, 廣岡孝彦;安田安志
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: vol.77, no.775 Pages: 1078-1085
- Data Source
  KAKENHI-PROJECT-21560121
[Journal Article] パッシブ除振台上に設置した高精密加工機の振動解析2011
- Author(s)
  河野大輔, 松原厚, 岡田琢巳, 廣岡孝彦, 安田正志
- Journal Title
  
  日本機械学会論文集C編
  
  Volume: 77 Pages: 1078-1085
- NAID
  130004659350
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] 粒子フィルタを用いた回転時のベアリングの熱的境界条件の同定2024
- Author(s)
  石垣綾斗, 河野大輔
- Organizer
  公益社団法人精密工学会2024年度精密工学会春季大会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] Investigation on damping properties of contact surfaces with different asperity heights2023
- Author(s)
  Shimpei Saito, Daisuke Kono
- Organizer
  euspen’s 23rd International Conference & Exhibition
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] Temperature Dependency of Stiffness in Machine Tool Spindle Using Carbon Fiber Composite2023
- Author(s)
  Daisuke Kono, Yuki Nara
- Organizer
  The 10th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN) 2023
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] Improved tribological properties with the surface texture generated by ultrasonic vibration cutting2023
- Author(s)
  高島孝太，辻尚史，河野大輔，櫻田陽，柳澤憲史，川村拓史，原圭祐，磯部浩已
- Organizer
  International Conference on Leading Edge Manufacturing/Materials & Processing (LEM&P 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01225
[Presentation] Generation of Pattern-Controlled Surface Texture Using Ultrasonic Vibration Assisted Turning2023
- Author(s)
  高島孝太，辻尚史，柳澤憲史，田浦祐生，河野大輔，櫻田陽，川村拓史，原圭祐，磯部浩已
- Organizer
  The 25th International Symposium on Advances in Abrasive Technology (ISAAT2025)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01225
[Presentation] 非接触温度測定と粒子フィルタを用いた回転軸の熱的境界条件の同定に関する研究2023
- Author(s)
  石垣綾斗, 河野大輔, 大和駿太郎
- Organizer
  公益社団法人精密工学会2023年度精密工学会秋季大会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 接触突起高さに差を設けた試験片における水平方向荷重負荷時の突起変形挙動の調査2023
- Author(s)
  齋藤慎平，河野大輔
- Organizer
  2023年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] 超音波振動切削により創成された表面テクスチャにおける真実接触状態の可視化（第2報）－3次元有限要素法による内部応力の解析－2023
- Author(s)
  高島孝太, 櫻田陽, 河野大輔, 辻尚史, 川村拓史, 原圭祐, 磯部浩已
- Organizer
  2023年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] 加工プロセスでのデジタルツイン活用における人とAIの役割の将来像2022
- Author(s)
  河野大輔
- Organizer
  日本機械学会2022年度年次大会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 超音波振動切削により創成された表面テクスチャにおける真実接触状態の可視化（第2報）－3次元有限要素法による内部応力の解析－2022
- Author(s)
  高島孝太,櫻田陽,原圭祐,河野大輔,田浦祐生,辻尚史,磯部浩已
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-21H01225
[Presentation] Evaluation of Tribological Properties of Surface Textures Generated by Ultrasonic Vibration Cutting2022
- Author(s)
  Kota TAKASHIMA, Akira SAKURADA, Keisuke HARA, Daisuke KONO, Hiroo TAURA, Naofumi TSUJI, and Hiromi ISOBE
- Organizer
  19th International Conference on Precision Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01225
[Presentation] Study on stress distribution variation near contact surface in sliding of contact asperities2022
- Author(s)
  Shimpei Ssaito, Daisuke Kono, Hiromi Isobe
- Organizer
  The 19th International Conference on Precision Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] 異なる突起高さを持つ接触面での減衰性に関する研究2022
- Author(s)
  齋藤慎平，河野大輔
- Organizer
  日本機械学会第 14 回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] 超波振動切削によるテクスチャ創成技術と有効性の評価（第4報）2022
- Author(s)
  高島孝太,櫻田陽,原圭祐,河野大輔,田浦祐生,辻尚史,磯部浩已
- Organizer
  2022年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-21H01225
[Presentation] 主軸発熱時の剛性変化に材料配置が与える影響の調査2022
- Author(s)
  田中淳聖, 河野大輔
- Organizer
  精密工学会2022年度関西地方定期学術講演会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 異方性材料を用いた主軸ベアリング内外輪の相対変位抑制2022
- Author(s)
  田中淳聖，河野大輔
- Organizer
  2022年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 超音波振動切削により創成された表面テクスチャにおける真実接触状態の可視化2022
- Author(s)
  高島孝太，亀ヶ谷尚志，櫻田陽，原圭祐，河野大輔，田浦裕生，辻尚史，磯部浩已
- Organizer
  2022年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] Nam Dongkyong,画像を用いた工作機械振動の遠隔モニタリングシステムの開発2022
- Author(s)
  河野大輔, 三浦我夢, 北川颯人, 森勇人
- Organizer
  IMEC2022（第19 回国際工作機械技術者会議）ポスターセッション
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 超音波振動切削による表面テクスチャ創成技術と有用性の評価（第4報）ー加工条件とトライボロジー特性の関係評価ー2022
- Author(s)
  高島孝太，櫻田陽，原圭祐，河野大輔，田浦裕生，辻尚史，磯部浩已
- Organizer
  公益社団法人精密工学会2022年度精密工学会春季大会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] 画像を用いた振動の遠隔モニタリングシステムの開発2022
- Author(s)
  河野大輔, 三浦我夢, 森勇人, 北川颯人
- Organizer
  日本機械学会第14回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 発熱による主軸剛性の変化に対する材料配置の影響の調査2022
- Author(s)
  田中淳聖, 河野大輔
- Organizer
  精密工学会 2022年度精密工学会秋季大会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] Evaluation of Tribological Properties of Surface Textures Generated by Ultrasonic Vibration Cutting2022
- Author(s)
  Kota TAKASHIMA, Akira SAKURADA, Keisuke HARA, Daisuke KONO, Hiroo TAURA, Naofumi TSUJI, Hiromi ISOBE
- Organizer
  The 19th International Conference on Precision Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] Direct observation of contact surface deformation2021
- Author(s)
  Taisuke Yamazaki, Tomohiro Ishii, Masao Kimura, Daisuke Kono
- Organizer
  The 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] X線CTを用いた静的荷重負荷下における接触面の変形観察2021
- Author(s)
  山崎太資,石井友弘,木村正雄,河野大輔
- Organizer
  2021年度精密工学会春季大会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] 超音波振動切削による表面テクスチャ創成技術と有用性の評価(第 3 報)-外周面へのテクスチャ創成と摺動特性の評価-2021
- Author(s)
  高島孝太,櫻田陽,原圭祐,河野大輔,田浦祐生,辻尚史,磯部浩已
- Organizer
  2021年度精密工学会北陸信越支部学術講演会
- Data Source
  KAKENHI-PROJECT-21H01225
[Presentation] X線CTによる直接観察に基づく接触面変形挙動の解析2021
- Author(s)
  山崎太資，石井友弘，木村正雄，河野大輔
- Organizer
  公益社団法人精密工学会2021年度精密工学会秋季大会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] 光弾性光学系における撮影距離および被写界深度が位相差分布におよぼす影響2021
- Author(s)
  寺林雅将,石毛雅樹,丸山智義,辻尚史,河野大輔,磯部浩已
- Organizer
  2021年度精密工学会北陸信越支部学術講演会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] 主軸剛性の温度依存性の解析2021
- Author(s)
  東條明裕, 河野大輔
- Organizer
  2021年度精密工学会春季大会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 超音波振動切削による表面テクスチャ創成技術と有用性の評価（第2報）—起動摩擦の評価—2021
- Author(s)
  日向寺柾,櫻田陽,原圭祐,河野大輔,田浦裕生,辻尚史,磯部浩已
- Organizer
  公益社団法人精密工学会2021年度精密工学会秋季大会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] A friction fluctuation model of rolling guideways2021
- Author(s)
  Daisuke Kono, Tomoyuki Osumi
- Organizer
  ASME 2021 16th International Manufacturing Science and Engineering Conference MSEC2021
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 超音波振動切削による表面テクスチャ創成技術と有用性の評価（第3報）ー外周面へのテクスチャ創成と摺動特性の評価ー2021
- Author(s)
  高島孝太，櫻田陽，原圭祐，河野大輔，田浦裕生，辻尚史，磯部浩已
- Organizer
  2021年度精密工学会北陸信越支部学術講演会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] 超音波振動切削による表面テクスチャ創成技術と有用性の評価（第2報）2021
- Author(s)
  日向寺柾,櫻田陽,原圭祐,河野大輔,田浦裕生,辻尚史,磯部浩已
- Organizer
  2021年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-21H01225
[Presentation] 超音波振動切削による微細テクスチャの高速創成第一報　加工装置の構築と機能性評価2021
- Author(s)
  磯部浩已,田浦裕生,近藤礼皇,原圭祐,宮脇和人,櫻田陽,辻尚史,河野大輔
- Organizer
  2021年度精密工学会春季大会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] Study on machine tool spindle with excellent thermal stability2020
- Author(s)
  Akihiro Tojo, Daisuke Kono
- Organizer
  18th International Conference on Precision Engineering ICPE2020
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 接触面間の隙間を利用した接触面での剛性を低減させずに減衰性を向上させる手法2020
- Author(s)
  山崎太資,河野大輔
- Organizer
  2020年度精密工学会秋季大会
- Data Source
  KAKENHI-PROJECT-20H02046
[Presentation] On-Machine Measuring Instrument of Workpiece Compliance Uing Laser Interferometer2020
- Author(s)
  Daisuke Kono
- Organizer
  2020 International Symposium on Flexible Automation ISFA2020
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06078
[Presentation] 温度安定性に優れた工作機械主軸に関しての研究2020
- Author(s)
  東條明裕，河野大輔
- Organizer
  2020年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] Machining-based thermal error analysis of CFRP-structured machine tool2020
- Author(s)
  Makoto Kato, Yuji Mizoguchi, Kazumasa Kono, Yasuhiro Kakinuma
- Organizer
  20th Machining Innovations Conference for Aerospace Industry 2020 (MIC 2020)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H00735
[Presentation] 相図を用いた切削加工振動の解析2019
- Author(s)
  松原厚,高田希恵,河野大輔
- Organizer
  日本機械学会第 13 回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-17H03157
[Presentation] 薄肉部品の切削加工における振動の安定性の解析2019
- Author(s)
  高田希恵,梅津拓真,河野大輔,松原厚
- Organizer
  2019 年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-17H03157
[Presentation] 薄肉工作物の機上動剛性測定法の評価2018
- Author(s)
  梅津拓真，河野大輔，松原厚
- Organizer
  2 0 1 8 年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-17K06078
[Presentation] オンマシン動剛性計測に基づく低剛性工作物の加工プロセス2018
- Author(s)
  梅津拓真，河野大輔
- Organizer
  第１８回国際工作機械技術者会議（IMEC2018）
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06078
[Presentation] A measuring device for dynamic stiffness of thin-walled workpiece2017
- Author(s)
  Daisuke Kono, Takuma Umezu
- Organizer
  6th International Conference on Virtual Machining Process Technology (VMPT)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06078
[Presentation] Investigation on position dependency of tool-workpiece compliance2015
- Author(s)
  Daisuke Kono
- Organizer
  38th MATADOR Conference
- Place of Presentation
  Huwei, Taiwan
- Year and Date
  2015-03-29
- Invited
- Data Source
  KAKENHI-PROJECT-26820021
[Presentation] 工作機械のコンプライアンスの位置依存性と方向依存性に関する研究2015
- Author(s)
  河野大輔
- Organizer
  2015年度精密工学会春季大会学術講演会
- Place of Presentation
  東京
- Year and Date
  2015-03-17
- Data Source
  KAKENHI-PROJECT-26820021
[Presentation] Vibration analysis of machine tools considering contact stiffness of supports2013
- Author(s)
  Daisuke Kono
- Organizer
  Proc. of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology(ASPEN2013)
- Place of Presentation
  Taipei Taiwan, (1053)
- Year and Date
  2013-11-13
- Data Source
  KAKENHI-PROJECT-24760104
[Presentation] 工作機械の支持剛性を変化させる方法に関する研究2013
- Author(s)
  河野大輔
- Organizer
  2013年度精密工学会秋季大会学術講演会
- Place of Presentation
  大阪
- Data Source
  KAKENHI-PROJECT-24760104
[Presentation] 工作機械の支持剛性を変化させる方法に関する研究2013
- Author(s)
  今安森也,河野大輔,松原厚,山路伊和夫
- Organizer
  2013年度精密工学会秋季大会学術講演会
- Place of Presentation
  大阪,(A13)
- Year and Date
  2013-09-12
- Data Source
  KAKENHI-PROJECT-24760104
[Presentation] 構造振動を考慮した工作機械の支持点配置に関する研究2013
- Author(s)
  西尾修也,河野大輔,松原厚,山路伊和夫
- Organizer
  2013年度精密工学会秋季大会学術講演会
- Place of Presentation
  大阪,(A14)
- Year and Date
  2013-09-12
- Data Source
  KAKENHI-PROJECT-24760104
[Presentation] Vibration analysis of machine tools considering contact stiffness of supports2013
- Author(s)
  Daisuke Kono
- Organizer
  5th International Conference of Asian Society for Precision Engineering and Nanotechnology(ASPEN2013）
- Place of Presentation
  Taipei,Taiwan
- Data Source
  KAKENHI-PROJECT-24760104
[Presentation] 工作機械の支持剛性の推定に関する研究2012
- Author(s)
  河野大輔, 稲垣孝洋, 松原厚, 山路伊和夫
- Organizer
  2012年度精密工学会春季大会学術講演会
- Place of Presentation
  首都大学東京
- Year and Date
  2012-03-16
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] 工作機械の支持剛性の推定に関する研究2012
- Author(s)
  河野大輔, 稲垣孝洋, 松原厚, 山路伊和夫
- Organizer
  2012年度精密工学会春季大会学術講演会
- Place of Presentation
  東京
- Year and Date
  2012-03-16
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] ロッキング振動を考慮した工作機械の支持点配置に関する研究2012
- Author(s)
  西尾修也,松原厚,河野大輔
- Organizer
  2011年度精密工学会秋季大会学術講演会
- Place of Presentation
  福岡,(J37)
- Year and Date
  2012-09-15
- Data Source
  KAKENHI-PROJECT-24760104
[Presentation] ナノインデンテーションによる接触剛性モデルのパラメータ同定2012
- Author(s)
  河野大輔,松原厚
- Organizer
  2012年度精密工学会秋季大会学術講演会
- Place of Presentation
  福岡,(J36)
- Year and Date
  2012-09-15
- Data Source
  KAKENHI-PROJECT-24760104
[Presentation] 接触剛性が工作機械の支持剛性に与える影響に関する研究2011
- Author(s)
  稲垣孝洋, 松原厚, 河野大輔
- Organizer
  2011年度精密工学会秋季大会学術講演会
- Place of Presentation
  金沢
- Year and Date
  2011-09-20
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] 剛体マルチボディモデルを用いた高精密加工機の振動評価2011
- Author(s)
  河野大輔, 松原厚
- Organizer
  2011年度精密工学会秋季大会学術講演会
- Place of Presentation
  金沢
- Year and Date
  2011-09-20
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] 工作機械のロッキング振動の解析2011
- Author(s)
  稲垣孝洋, 松原厚, 河野大輔
- Organizer
  精密工学会2011年度関西地方定期学術講演会
- Year and Date
  2011-06-30
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] パッシブ除振台上に設置した高精密加工機の振動解析2009
- Author(s)
  廣岡孝彦, 松原厚, 河野大輔, 安田正志, 岡田琢巳
- Organizer
  2009年度精密工学会秋季大会学術講演会
- Place of Presentation
  神戸大学
- Year and Date
  2009-09-12
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] ナノインデンテーションによる接触剛性モデルのパラメータ同定
- Author(s)
  河野大輔
- Organizer
  2012年度精密工学会秋季大会学術講演会
- Place of Presentation
  福岡，日本
- Data Source
  KAKENHI-PROJECT-24760104

1. MATSUBARA Atsushi (80243054)

# of Collaborated Projects: 2 results

# of Collaborated Products: 12 results
2. Isobe Hiromi (60272861)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. IBARAKI Soichi (80335190)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. Sugita Naohiko (70372406)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 柿沼康弘 (70407146)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
6. 小池綾 (70781417)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 福井類 (80607416)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. 吉岡勇人 (90361758)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. 木村正雄 (00373746)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
10. 櫻田陽 (90442681)

# of Collaborated Projects: 1 results

# of Collaborated Products: 7 results
11. 原圭祐 (30515812)

# of Collaborated Projects: 1 results

# of Collaborated Products: 7 results
12. 田浦裕生 (20334691)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
13. 田島真吾 (70862308)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. 磯部浩巳

# of Collaborated Projects: 0 results

# of Collaborated Products: 17 results

Kono Daisuke 河野 大輔

KONO Daisuke 河野 大輔

Research Projects

Research Products

Co-Researchers

不確かさ評価に基づく工作機械の画像計測・位置制御システム実現の方法論Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Rapid Generation and Sliding Characteristics of Aligned Microtextures by Phase-Controlled Ultrasonic Cutting

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Reconstruction of contact model and design method of contact surface geometry by direct measurement of deformation behavior on metal contact surfacesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Machine tools based on inovation of design and informatics

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Machining process for thin-walled workpiece using on-machine measurement of workpiece dynamic stiffnessPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Analysis of self-excited chatter with mode coupling using real-time simulation of cutting process

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Evaluation of vibration characteristic of machine tools using measuring system for three-dimensional compliancePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Design of machine tool supports based on analysis of contact stiffnessPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Design method to control ground vibration and direct vibrations for micro-nano machine tools

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Analysis of tangential contact damping mechanism by direct observation using X-ray computed tomography2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Rolling resistance model for estimation of friction fluctuation in linear ball guideways2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Holistic multi-scale model of contact stiffness considering subsurface deformation2021

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Cutter mark cross method for improvement of contact stiffness by controlling distribution of real contact area2020

Author(s)

Journal Title

DOI

NAID

Data Source

Kono Daisuke 河野大輔

KONO Daisuke 河野大輔