Ikushima Kazuki 生島一樹

Researcher Number	80734003
Other IDs
Affiliation (Current)	2025: 大阪公立大学, 大学院工学研究科 , 准教授
Affiliation (based on the past Project Information) *help	2024: 大阪公立大学, 大学院工学研究科, 准教授 2022: 大阪公立大学, 大学院工学研究科, 准教授 2021: 大阪府立大学, 工学(系)研究科(研究院), 准教授 2014 – 2020: 大阪府立大学, 工学(系)研究科(研究院), 助教 2016: 大阪府立大学, 工学(系)研究科(研究院), 特認助教
Review Section/Research Field	Principal Investigator Basic Section 24020:Marine engineering-related / Naval and maritime engineering / Medium-sized Section 24:Aerospace engineering, marine and maritime engineering, and related fields Except Principal Investigator Basic Section 24020:Marine engineering-related / Naval and maritime engineering
Keywords	Principal Investigator 残留応力 / 溶接変形 / 溶接力学解析 / 大規模解析 / 画像計測 / 高性能計算 / 熱変形 / 熱弾塑性解析 / 金属積層造形 / リスク評価 … More / 破壊解析 / デジタルツイン / 構造崩壊挙動解析 / 不確実性 / 船体最終強度 / 船体建造工程 / 構造崩壊挙動 / 信頼性解析 / 最終強度解析 / 最終強度 / 座屈崩壊 / 船体構造 / 並列計算 / 溶接 / 構造解析 / 計算力学 / 防撓構造 / 座屈 / 座屈崩壊挙動 / 非線形有限要素解析 / 大規模非線形解析 / 大変形 / 非線形解析 / 船体ブロック / 有限要素法 … More Except Principal Investigator 理想化陽解法FEM / 変形 / 残留応力 / シミュレーション / サロゲートモデル / 4次元可視化 / レーザ・アークハイブリッド溶接 / 高温割れ / デジタルツイン / 割れ防止技術 / AI / 片面サブマージアーク溶接 / 溶接高温割れ / FEM解析 / 大規模解析 / 計算工学 / 溶接工学 / 船舶工学 / 任意形状 / 自動化 / 熱弾塑性解析 / 固有ひずみ法 / 人工知能 / モンテカルロ法 / 有限要素法 / 船体構造 / 線状加熱 / 可視化 / 計測 / 大規模計算 / 疲労寿命 / 破壊強度 / 溶接組立 / 逐次損傷崩壊 / き裂進展 / 溶接変形 / 溶接残留応力 / 四次元可視化 / 溶接力学 / 破壊力学 / 生産 / 設計 / 計算科学 / 寿命 / 疲労 / 破壊 / 溶接構造物 / CAE Less

Evaluation of uncertainty in ship structural collapse behavior and risk at time of damage using construction and strength-linked analysisPrincipal Investigator
- Principal Investigator
  
  生島一樹
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 24020:Marine engineering-related
- Research Institution
  Osaka Metropolitan University
Four-Dimensional Visualization of Thermal Processing in Ship Hull Fabrication and Establishment of Crack Prevention Using Digital Twins
- Principal Investigator
  
  柴原正和
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 24020:Marine engineering-related
- Research Institution
  Osaka Metropolitan University
Development of an innovative prediction method for predicting mechanical behavior during metal additive manufacturingPrincipal Investigator
- Principal Investigator
  
  生島一樹
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Challenging Research (Exploratory)
- Review Section
  
  Medium-sized Section 24:Aerospace engineering, marine and maritime engineering, and related fields
- Research Institution
  Osaka Metropolitan University
Clarification of uncertainty in ultimate strength of ship structure by developing integrated analysis system of construction, strength and reliabilityPrincipal Investigator
- Principal Investigator
  
  Ikushima Kazuki
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 24020:Marine engineering-related
- Research Institution
  Osaka Metropolitan University
  Osaka Prefecture University
Systematization of analysis for welding hot cracking and establishment of crack prevention method using AI
- Principal Investigator
  
  Shibahara Masakazu
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 24020:Marine engineering-related
- Research Institution
  Osaka Prefecture University
Development of full-automatic line heating system
- Principal Investigator
  
  Shibahara Masakazu
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Osaka Prefecture University
Structural analysis of ship hull using ultra large-scale welding mechanics analysis and collapse analysisPrincipal Investigator
- Principal Investigator
  
  Ikushima Kazuki
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Osaka Prefecture University
Development of 4 Dimensional CAE Visualization System for Assessment of Quality and Safety of Structures through Life Time Starting from Production
- Principal Investigator
  
  Murakawa Hidekazu
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Osaka University
Investigation on mitigation of welding deformation on assembly of ship hull block using ultra large scale analysis methodPrincipal Investigator
- Principal Investigator
  
  Ikushima Kazuki
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Research Activity Start-up
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Osaka Prefecture University

All 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 Other

All Journal Article Presentation Patent

[Journal Article] Shell–solid Coupling Analysis for Mechanical Behavior of Complex Thin-plate Weld Structure2023
- Author(s)
  Zhihao LI, Yuki YAMAUCHI, Shintaro MAEDA, Kazuki IKUSHIMA, Masakazu SHIBAHARA
- Journal Title
  
  QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
  
  Volume: 41 Issue: 2 Pages: 31s-35s
- DOI
  10.2207/qjjws.41.31s
- ISSN
  0288-4771, 2434-8252
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H02375
[Journal Article] Study on Application of Efficient FE Modeling Technique in Analysis of Welding Mechanics2023
- Author(s)
  Shintaro MAEDA, Yuki YAMAUCHI, Kazuki IKUSHIMA, Masakazu SHIBAHARA
- Journal Title
  
  QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
  
  Volume: 41 Issue: 2 Pages: 16s-20s
- DOI
  10.2207/qjjws.41.16s
- ISSN
  0288-4771, 2434-8252
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H02375
[Journal Article] Study on Mechanical Behavior during Friction Stir Welding Using Numerical Simulation2021
- Author(s)
  生島一樹、李志浩、木谷悠二、前田新太郎、宮坂史和、柴原正和
- Journal Title
  
  Journal of Light Metal Welding
  
  Volume: 59 Issue: 5 Pages: 10-16
- DOI
  10.11283/jlwa.59.10
- NAID
  130008038792
- ISSN
  0368-5306, 2186-618X
- Year and Date
  2021-05-16
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19H02366
[Journal Article] Enhanced idealized explicit FEM for predicting welding deformation in complex large-scaled2021
- Author(s)
  Kazuki Ikushima , Shintaro Maeda , Teruya Ieshita , Atsushi Kawahara , Yuuta Abe , Hirotaka Kiuchi, Masakazu Shibahara
- Journal Title
  
  Welding International
  
  Volume: Vol.33:1-3 Pages: 1-16
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02366
[Journal Article] Numerical investigation on the effect of thickness and stress level on fatigue crack growth in notched specimens2021
- Author(s)
  Ramy Gadallah, Hidekazu Murakawa, Kazuki Ikushima, Masakazu Shibahara, Seiichiro Tsutsumi
- Journal Title
  
  Theoretical and Applied Fracture Mechanics
  
  Volume: 116 Pages: 103138-103138
- DOI
  10.1016/j.tafmec.2021.103138
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19H02366
[Journal Article] Enhanced idealized explicit FEM for predicting welding deformation in complex large-scaled structure and application to the real structure2021
- Author(s)
  K. Ikushima, S. Maeda, T. Ieshita, A. Kawahara, Y. Abe, H. Kiuchi, M. Shibahara
- Journal Title
  
  Welding International
  
  Volume: 33 Pages: 1-16
- NAID
  120007044344
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02375
[Journal Article] Study on Prevention Method of Hot Cracking Under Butt Welding2021
- Author(s)
  前田新太郎、生島一樹、柴原正和、三輪剛士、山崎圭、西原健作、武田裕之、麻寧緒
- Journal Title
  
  QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
  
  Volume: 39 Issue: 4 Pages: 396-405
- DOI
  10.2207/qjjws.39.396
- NAID
  130008136517
- ISSN
  0288-4771, 2434-8252
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19H02366
[Journal Article] Development of Analysis Method for Hot Cracking Considering Mechanical and Metallurgical Factors2021
- Author(s)
  前田新太郎、生島一樹、柴原正和、麻寧緒
- Journal Title
  
  QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
  
  Volume: 39 Issue: 4 Pages: 386-395
- DOI
  10.2207/qjjws.39.386
- NAID
  130008136524
- ISSN
  0288-4771, 2434-8252
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19H02366
[Journal Article] Numerical Analysis for Stress Behavior During Shot Peening2020
- Author(s)
  Kazuki IKUSHIMA, Yusuke YAMADA, Masakazu SHIABHARA and Koichi AKITA
- Journal Title
  
  Mathematical Modelling of Weld Phenomena
  
  Volume: 12, Pages: 417-429
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02366
[Journal Article] Prediction of welding deformation of automotive component using large-scale thermal elastic plastic analysis method2020
- Author(s)
  K. Ikushima, S. Maeda, T. Uchimura, A. Kawahara, M. Shibahara, H. Kuwabara, H. Kanetake
- Journal Title
  
  溶接学会論文集
  
  Volume: 38
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02375
[Journal Article] Efficient modelling on analysis of welding mechanics using mesh superposition method2020
- Author(s)
  K. Ikushima, R. Ashida, M. Shibahara
- Journal Title
  
  溶接学会論文集
  
  Volume: Vol.38, No.2
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02366
[Journal Article] Prediction of welding deformation of automotive component using large-scale thermal elastic plastic analysis method2020
- Author(s)
  K. Ikushima, S. Maeda, T. Uchimura, A. Kawahara, M. Shibahara, H. Kuwabara, H. Kanetake
- Journal Title
  
  溶接学会論文集
  
  Volume: Vol.38, No.2
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02366
[Journal Article] Efficient modelling on analysis of welding mechanics using mesh superposition method2020
- Author(s)
  K. Ikushima, R. Ashida, M. Shibahara
- Journal Title
  
  溶接学会論文集
  
  Volume: 38
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H02375
[Journal Article] Ultra-Large-Scale Nonlinear FE Analysis of Welding Mechanics2019
- Author(s)
  Kazuki IKUSHIMA, Masakazu SHIBAHARA
- Journal Title
  
  Proceedings of International Conference on Computational & Experimental Engineering and Science (ICCES’19)
  
  Volume: 1
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] 大規模複雑構造物の溶接変形解析に向けた理想化陽解法FEMの拡張と実大構造物への適用2019
- Author(s)
  生島一樹, 前田新太郎, 家下輝也, 河原充, 阿部雄太, 木内大貴, 柴原正和
- Journal Title
  
  溶接学会論文集
  
  Volume: 37 Pages: 141-151
- NAID
  130007732168
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02366
[Journal Article] Nonlinear Computational Welding Mechanics for Large Structures2018
- Author(s)
  Kazuki Ikushima and Masakazu Shibahara
- Journal Title
  
  ASME
  
  Volume: 141(2)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] Nonlinear Computational Welding Mechanics for Large Structures2018
- Author(s)
  K. Ikushima, M. Shibahara
- Journal Title
  
  Journal of Offshore Mechanics and Ocean Engineering
  
  Volume: Vol.141, No.2 Issue: 2 Pages: 021603-021603
- DOI
  10.1115/1.4041395
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K18324
[Journal Article] Analysis of Welding Deformation on Construction of Large Thin Plate Structure by Idealized Explicit FEM Using Multigrid Method2017
- Author(s)
  K. Ikushima, T. Harada, M. Shibahara
- Journal Title
  
  Mathematical Modelling of Weld Phenomena
  
  Volume: 11 Pages: 295-307
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] 大規模溶接熱弾塑性解析手法の実機適用2017
- Author(s)
  生島一樹、柴原正和、河原充、前田新太郎、桑原仁志、金武完明
- Journal Title
  
  溶接構造シンポジウム2017
  
  Volume: 1 Pages: 101-108
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] Simulation of mechanical phenomena of hot cracking2017
- Author(s)
  Shibahara, M., Ikushima, K.
- Journal Title
  
  Yosetsu Gakkai Shi/Journal of the Japan Welding Society
  
  Volume: 86(1) Pages: 48-51
- NAID
  130005306119
- Data Source
  KAKENHI-PROJECT-15H04212
[Journal Article] Nonlinear computational welding mechanics for large scale structures2017
- Author(s)
  Kazuki Ikushima, Yoshitaka Kawajiri, Masakazu Shibahara
- Journal Title
  
  Proceedings of International Conference on Computational & Experimental Engineering and Science (ICCES’17)
  
  Volume: 1
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] Large Deformation Thermal Elastic-Plastic Analysis of Thin-plate structure2017
- Author(s)
  Shintaro MAEDA, Kazuki IKUSHIMA and Masakazu SHIBAHARA
- Journal Title
  
  31st Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structure (TEAM2017)
  
  Volume: 1 Pages: 59-59
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] Study on fracture mode of spot weld joint using continuum damage mechanics model2017
- Author(s)
  T. Saito, D. Takakura, M. Shibahara, A. Kawahara, K. Ikushima
- Journal Title
  
  QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
  
  Volume: 35 Issue: 2 Pages: 28s-32s
- DOI
  10.2207/qjjws.35.28s
- NAID
  130006329498
- ISSN
  0288-4771, 2434-8252
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H04212
[Journal Article] Large deformation analysis of thin plate structure welding2017
- Author(s)
  Shintaro MAEDA, Kazuki IKUSHIMA, Masakazu SHIBAHARA
- Journal Title
  
  Proceedings of International Conference on Computational & Experimental Engineering and Science (ICCES’17)
  
  Volume: 1
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] Numerical Optimization of Groove Shape and Welding Sequence on T-joint Multi Passes Welding and Validation by Welding Test2017
- Author(s)
  Saito Toshiaki、Takakura Daisuke、Shibahara Masakazu、Kawahara Atsushi、Ikushima Kazuki
- Journal Title
  
  QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
  
  Volume: 35 Issue: 2 Pages: 141s-145s
- DOI
  10.2207/qjjws.35.141s
- NAID
  130006329359
- ISSN
  0288-4771, 2434-8252
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] Numerical study on weld buckling distortion in thin plate2017
- Author(s)
  Shintaro MAEDA , Kazuki IKUSHIMA and Masakazu SHIBAHARA
- Journal Title
  
  International Seminar on Welding Science and Engineering 2017 (WSE2017)
  
  Volume: 1 Pages: 482-483
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] Numerical analysis of residual stress distribution on peening process2017
- Author(s)
  Ikushima, K., Shibahara, M., Akita, K., Nishikawa, S., Furukawa, T.
- Journal Title
  
  Welding in the World
  
  Volume: 61(3) Pages: 517-527
- NAID
  120006936283
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H04212
[Journal Article] Numerical analysis of residual stress distribution on peening process2017
- Author(s)
  Ikushima Kazuki、Shibahara Masakazu、Akita Koichi、Suzuki Hiroshi、Morooka Satoshi、Nishikawa Satoru、Furukawa Takashi
- Journal Title
  
  Welding in the World
  
  Volume: 61 Issue: 3 Pages: 517-527
- DOI
  10.1007/s40194-017-0430-4
- NAID
  120006936283
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] Influence of Various Factors on Welding Distortion of Thin-plate Structures2017
- Author(s)
  M. Shibahara, T. Harada, S. Maeda, K. Ikushima
- Journal Title
  
  QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
  
  Volume: 35 Issue: 2 Pages: 146s-150s
- DOI
  10.2207/qjjws.35.146s
- NAID
  130006329360
- ISSN
  0288-4771, 2434-8252
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K18324, KAKENHI-PROJECT-15H04212, KAKENHI-PROJECT-16H04605
[Journal Article] 理想化陽解法FEMを用いた溶接座屈変形解析2017
- Author(s)
  前田新太郎、生島一樹、柴原正和
- Journal Title
  
  溶接構造シンポジウム2017
  
  Volume: 1 Pages: 93-100
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] Numerical Optimization of Welding Condition on T-joint Multi Passes Welding and Validation by a Welding Test2016
- Author(s)
  Toshiaki Saito, Daisuke Takakura, Masakazu Shibahara, Atsushi Kawahara, Kazuki Ikushima
- Journal Title
  
  Visual JW 2016
  
  Volume: 1 Pages: 229-230
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] NONLINEAR COMPUTATIONAL WELDING MECHANICS FOR LARGE STRUCTURES2016
- Author(s)
  K.Ikushima, M.Shibahara
- Journal Title
  
  Proceedings of the ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2016)
  
  Volume: 1 Pages: 1-9
- DOI
  10.1115/omae2016-54313
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] Study on influence of various factors on welding distortion of thin-plate structures2016
- Author(s)
  Takaaki Harada, Shintaro Maeda, Kazuki Ikushima, Masakazu Shibahara
- Journal Title
  
  Visual JW 2016
  
  Volume: 1 Pages: 239-240
- Data Source
  KAKENHI-PROJECT-16H04605
[Journal Article] Enhanced large-scale analysis method and its application to multiaxial pipe weld2016
- Author(s)
  Ikushima, K., Minamino, T., Kawahara, A., Nakatani, M., Shibahara, M.
- Journal Title
  
  Welding in the World
  
  Volume: 60(5) Pages: 915-929
- NAID
  120006936288
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H04212
[Journal Article] Development of Idealized Explicit FEM Using GPU Parallelization and Its Application to Large-scale Analysis of Residual Stress of Multi-pass Welded Pipe Joint2015
- Author(s)
  K. Ikushima, S. Itoh, M. Shibahara
- Journal Title
  
  Welding in the World
  
  Volume: Vol.59, No.4 Issue: 4 Pages: 589-595
- DOI
  10.1007/s40194-015-0235-2
- NAID
  120006936286
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26889052, KAKENHI-PROJECT-25420873
[Journal Article] 理想化陽解法FEMによる円筒多層溶接継手の3次元移動熱源残留応力解析2015
- Author(s)
  生島一樹, 伊藤真介, 西川聡, 柴原正和
- Journal Title
  
  溶接学会論文集
  
  Volume: Vol.33, No.1 Issue: 1 Pages: 69-81
- DOI
  10.2207/qjjws.33.69
- NAID
  130005062554
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26889052, KAKENHI-PROJECT-25420873
[Journal Article] Study on Welding Distortion of Stiffened Thin-Plate Structures Using Idealized Explicit FEM2015
- Author(s)
  K. Ikushima, M. Shibahara
- Journal Title
  
  QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
  
  Volume: 33 Issue: 2 Pages: 175s-179s
- DOI
  10.2207/qjjws.33.175s
- NAID
  130005098206
- ISSN
  0288-4771, 2434-8252
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26889052, KAKENHI-PROJECT-25420873
[Journal Article] Large-scale Non-linear Analysis of Residual Stresses in Multi-pass Pipe Welds by Idealized Explicit FEM2015
- Author(s)
  K. Ikushima, M. Shibahara
- Journal Title
  
  Welding in the World
  
  Volume: Vol.59, No.6 Issue: 6 Pages: 839-850
- DOI
  10.1007/s40194-015-0263-y
- NAID
  120006936287
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26889052, KAKENHI-PROJECT-25420873
[Journal Article] Large-scale non-linear analysis of residual stresses in multi-pass pipe welds by idealized explicit FEM2015
- Author(s)
  Ikushima, K., Shibahara, M.
- Journal Title
  
  Welding in the World
  
  Volume: 59 (6) Pages: 839-850
- NAID
  120006936287
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H04212
[Journal Article] Development of idealized explicit FEM using GPU parallelization and its application to large-scale analysis of residual stress of multi-pass welded pipe joint2015
- Author(s)
  Ikushima, K., Itoh, S., Shibahara, M
- Journal Title
  
  Welding in the World
  
  Volume: 59 (4) Pages: 589-595
- NAID
  120006936286
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H04212
[Journal Article] Large-scale Analysis of Welding Deformation and Residual Stress Problem by Idealized Explicit FEM Using Iterative Substructure Method2014
- Author(s)
  生島一樹, 伊藤真介, 高倉大典, 津乗充良, 柴原正和
- Journal Title
  
  QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
  
  Volume: 32 Issue: 4 Pages: 223-234
- DOI
  10.2207/qjjws.32.223
- NAID
  130004889475
- ISSN
  0288-4771, 2434-8252
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26889052
[Patent] 溶接電極およびスポット溶接装置2022
- Inventor(s)
  柴原正和、生島一樹、田中亮匡
- Industrial Property Rights Holder
  柴原正和、生島一樹、田中亮匡
- Industrial Property Rights Type
  特許
- Filing Date
  2022
- Overseas
- Data Source
  KAKENHI-PROJECT-19H02366
[Patent] 加熱方案の算出方法、プログラム、記録媒体、装置、変形方法、および変形金属板の製造方法(国際特許出願)2022
- Inventor(s)
  柴原正和、加藤拓也、生島一樹、前田新太郎
- Industrial Property Rights Holder
  柴原正和、加藤拓也、生島一樹、前田新太郎
- Industrial Property Rights Type
  特許
- Filing Date
  2022
- Overseas
- Data Source
  KAKENHI-PROJECT-19H02366
[Patent] 物理定数の推定値取得方法2022
- Inventor(s)
  柴原正和、生島一樹、高橋陸、木谷悠二、山内悠暉
- Industrial Property Rights Holder
  柴原正和、生島一樹、高橋陸、木谷悠二、山内悠暉
- Industrial Property Rights Type
  特許
- Filing Date
  2022
- Overseas
- Data Source
  KAKENHI-PROJECT-19H02366
[Patent] 溶接構造体の製造方法(国際特許出願)2021
- Inventor(s)
  柴原正和、生島一樹、三ッ井佑太、前田新太郎
- Industrial Property Rights Holder
  柴原正和、生島一樹、三ッ井佑太、前田新太郎
- Industrial Property Rights Type
  特許
- Filing Date
  2021
- Overseas
- Data Source
  KAKENHI-PROJECT-19H02366
[Patent] 物理定数の推定値取得方法2021
- Inventor(s)
  柴原正和、生島一樹、高橋陸、木谷悠二
- Industrial Property Rights Holder
  柴原正和、生島一樹、高橋陸、木谷悠二
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2021-037203
- Filing Date
  2021
- Data Source
  KAKENHI-PROJECT-19H02366
[Patent] ひずみ取りのための加熱方案の作成方法2021
- Inventor(s)
  柴原正和、生島一樹、前川真奈海、芦田崚、橋詰光、木谷悠二　等
- Industrial Property Rights Holder
  柴原正和、生島一樹、前川真奈海、芦田崚、橋詰光、木谷悠二　等
- Industrial Property Rights Type
  特許
- Filing Date
  2021
- Overseas
- Data Source
  KAKENHI-PROJECT-19H02366
[Patent] 溶接構造体の製造方法2021
- Inventor(s)
  柴原正和、生島一樹、三ッ井佑太、前田新太郎
- Industrial Property Rights Holder
  柴原正和、生島一樹、三ッ井佑太、前田新太郎
- Industrial Property Rights Type
  特許
- Filing Date
  2021
- Overseas
- Data Source
  KAKENHI-PROJECT-19H02366
[Patent] 溶接構造体の製造方法2020
- Inventor(s)
  柴原正和、生島一樹、三ッ井佑太、前田新太郎
- Industrial Property Rights Holder
  柴原正和、生島一樹、三ッ井佑太、前田新太郎
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2020-043414
- Filing Date
  2020
- Data Source
  KAKENHI-PROJECT-19H02366
[Patent] 溶接装置及び溶接方法(高温割れ防止装置)2020
- Inventor(s)
  柴原正和、前田新太郎、生島一樹、織田祐輔
- Industrial Property Rights Holder
  柴原正和、前田新太郎、生島一樹、織田祐輔
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2021-034592
- Filing Date
  2020
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] Shell-solid coupling analysis of mechanical behvior in complex thin-plate structure during welding2022
- Author(s)
  Zhihao LI, Shintaro MAEDA, Kazuki IKUSHIMA, Masakazu SHIBAHARA
- Organizer
  Visual-JW 2022
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02375
[Presentation] Study on application of efficient FE modeling technique in analysis of welding mechanics2022
- Author(s)
  Zhihao LI, Shintaro MAEDA, Kazuki IKUSHIMA, Masakazu SHIBAHARA
- Organizer
  Visual-JW 2022
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02375
[Presentation] データ同化手法を用いた熱伝導現象のパラメータ推定に関する基礎的検討2021
- Author(s)
  髙橋陸, 木谷悠二, 麻寧緒, 生島一樹, 柴原正和
- Organizer
  溶接学会全国大会
- Data Source
  KAKENHI-PROJECT-20H02375
[Presentation] 遺伝的アルゴリズムを用いた高温割れ防止法に関する検討2021
- Author(s)
  三ッ井佑太、前田新太郎、生島一樹、柴原正和
- Organizer
  軽金属溶接協会2021年度年次講演大会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] レーザアークハイブリッド溶接時の高温割れ解析2021
- Author(s)
  兼本拳多、河原充、前田新太郎、生島一樹、柴原正和
- Organizer
  溶接学会秋季全国大会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 凝固収縮ひずみを考慮した溶接高温割れ解析手法の開発2021
- Author(s)
  前田新太郎、麻寧緒、生島一樹、柴原正和
- Organizer
  溶接学会秋季全国大会講
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 温度履歴を用いたデータ同化による熱伝導パラメータ推定手法2021
- Author(s)
  小野進, 高橋陸, 木谷悠二, 生島一樹, 柴原正和
- Organizer
  溶接学会全国大会
- Data Source
  KAKENHI-PROJECT-20H02375
[Presentation] 突合せ溶接時の高温割れ発生に関する力学モデルの構築2021
- Author(s)
  織田祐輔、前田新太郎、吉田昇平、河原充、生島一樹、柴原正和
- Organizer
  溶接学会春季全国大会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 高速・高精度プロセスシミュレーションとデジタルツインを活用した革新的ものづくり技術開発と展開2021
- Author(s)
  生島一樹、柴原正和
- Organizer
  砥粒加工学会 KENMA研究会第20回研究会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 溶接時の柱状晶凝固成長簡易解析手法の開発2021
- Author(s)
  前田新太郎、麻寧緒、生島一樹、柴原正和
- Organizer
  溶接学会春季全国大会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 遺伝的アルゴリズムを用いた高温割れ防止法に関する検討2021
- Author(s)
  三ッ井佑太、生島一樹、前田新太郎、柴原正和
- Organizer
  日本船舶海洋工学会講演会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 溶接時の面外変形に及ぼす諸因子の影響に関する検討2021
- Author(s)
  田中亮匡, 加藤拓也, 峰松伸行, 高橋毅, 河原充, 吉田昇平, 生島一樹, 柴原正和
- Organizer
  溶接学会全国大会
- Data Source
  KAKENHI-PROJECT-20H02375
[Presentation] タンデム下向き突合せ溶接時における高温割れ防止についての検討タンデム下向き突合せ溶接時における高温割れ防止についての検討2021
- Author(s)
  前田新太郎、麻寧緒、生島一樹、河原充、三輪剛士、山崎圭、西原健作、武田裕之、柴原正和
- Organizer
  溶接学会秋季全国大会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] AI強化学習とFEMを用いた溶接順序最適化2021
- Author(s)
  李志浩、前田新太郎、生島一樹、柴原正和
- Organizer
  溶接学会秋季全国大会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 遺伝的アルゴリズムを用いた高温割れ防止法に関する検討2021
- Author(s)
  加藤拓也、手銭永遠、生島一樹、柴原正和
- Organizer
  日本船舶海洋工学会講演会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 溶接熱伝導問題におけるデータ同化手法の適用2021
- Author(s)
  生島一樹、小野進、髙橋陸、柴原正和
- Organizer
  日本船舶海洋工学会第126回KSSG研究会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] TransVarestraint試験の高温割れ解析2021
- Author(s)
  伊藤貴哉、織田祐輔、前田新太郎、生島一樹、柴原正和
- Organizer
  溶接学会春季全国大会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] T継手完全溶け込み溶接時の凝固割れに及ぼす諸因子の影響に関する数値解析的検討2021
- Author(s)
  王聞達、生島一樹、前田新太郎、尾嵜健人、永木勇人、大前暢、柴原正和
- Organizer
  溶接学会秋季全国大会
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] ガス加熱による変形に及ぼす入熱密度分布の影響に関する検討2020
- Author(s)
  沖見優衣、芦田崚、生島一樹、柴原正和、夏目糧平、小田和生、山崎洋輔、中谷光良
- Organizer
  溶接学会春季全国大会講演概要 Vol.104, 206-207
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 開先開口挙動が溶接高温割れに及ぼす影響2020
- Author(s)
  織田祐輔、前田新太郎、生島一樹、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, P-5-8
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] ガス加熱による変形に及ぼす入熱密度分布の影響に関する検討2020
- Author(s)
  高橋陸、芦田崚、生島一樹、柴原正和、夏目糧平、小田和生、山崎洋輔、中谷光良
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, P-5-6
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 理想化陽解法FEMを用いた大規模クリープ損傷解析2020
- Author(s)
  木谷悠二、麻寧緒、西川聡、生島一樹、柴原正和
- Organizer
  溶接学会春季全国大会講演概要 Vol.104, 208-209
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] アルミニウム合金スポット溶接時の適正施工条件に関する検討2020
- Author(s)
  田中亮匡、野木友香、内村太郎、生島一樹、柴原正和
- Organizer
  軽金属溶接協会2020年度年次講演大会, 54
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 溶接高温割れ問題に対するAI強化学習の応用2020
- Author(s)
  前田新太郎、麻寧緒、織田祐輔、生島一樹、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, 202-203
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 並進加熱を用いた高温割れ防止に関する検討2020
- Author(s)
  前田新太郎、三ッ井佑太、織田祐輔、生島一樹、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, P-5-5
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 遺伝的アルゴリズムを用いた高温割れ防止仮付け施工に関する検討2020
- Author(s)
  前田新太郎、麻寧緒、生島一樹、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, 204-205
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] Nonlinear mechanical FE analysis of thin-plate complex structures using the shell-solid mixed method2020
- Author(s)
  K. Ikushima
- Organizer
  39th International Conference on Ocean, Offshore and Arctic Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02375
[Presentation] AI線状加熱を用いた自動加熱方案作成システムに関する検討2020
- Author(s)
  芦田崚、生島一樹、野津亮、丹後義彦、木治昇、駒田周治、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, 198-199
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] PWHTによる溶接継手の残留応力低減効果の解析2020
- Author(s)
  木谷悠二、生島一樹、吉田昇平、河原充、夏目糧平、小田和生、山崎洋輔、中谷光良、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, 196-197
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 数理最適化に基づくひずみ取りの自動化に関する検討2020
- Author(s)
  加藤拓也、芦田崚、生島一樹、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, P-2-5
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 粒子法およびFEMを用いたFSWに関する力学的検討2020
- Author(s)
  李志浩、生島一樹、宮坂史和、柴原正和
- Organizer
  溶接学会春季全国大会講演概要 Vol.104, 22-23
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] Complex法に基づくひずみ取りの自動化に関する検討2020
- Author(s)
  加藤拓也、芦田崚、生島一樹、夏目糧平、小田和生、山崎洋輔、中谷光良、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, 284-285
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] スポット溶接時における適正施工条件に及ぼす諸因子の影響に関する検討2020
- Author(s)
  田中亮匡、生島一樹、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, P-5-7
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 粒子法およびFEMを用いたFSWに関する数値解析的検討2020
- Author(s)
  李志浩、生島一樹、宮坂史和、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, 96-97
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] HAZ 割れの力学シミュレーション2020
- Author(s)
  織田祐輔、生島一樹、柴原正和、前田新太郎、森裕章
- Organizer
  軽金属溶接協会2020年度年次講演大会, 51
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 並進加熱による高温割れ防止法の提案2020
- Author(s)
  三ッ井佑太、前田新太郎、生島一樹、柴原正和
- Organizer
  溶接学会春季全国大会講演概要 Vol.104, 112-113
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] アルミニウム合金溶接時における溶接変形に関する基礎的検討2020
- Author(s)
  高橋陸、芦田崚、生島一樹、柴原正和
- Organizer
  軽金属溶接協会2020年度年次講演大会, 53
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] ガス加熱時における変形に及ぼす入熱密度分布の影響に関する検討2020
- Author(s)
  高橋陸、芦田崚、生島一樹、夏目糧平、小田和生、山崎洋輔、中谷光良、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, 192-193
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] AI線状加熱による加熱法案作成システムに関する検討2020
- Author(s)
  芦田崚、前川真奈海、生島一樹、野津亮、丹後義彦、木治昇、駒田周治、柴原正和
- Organizer
  溶接学会春季全国大会講演概要 Vol.104, 198-199
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 並進加熱による高温割れ防止法の適用性に関する数値解析的検討2020
- Author(s)
  前田新太郎、伊藤貴哉、三ッ井佑太、織田祐輔、生島一樹、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, 278-279
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 突き合わせ溶接時の高温割れ発生メカニズムに関する検討2020
- Author(s)
  織田祐輔、前田新太郎、生島一樹、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.105, 206-207
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] アルミ合金の防撓構造ひずみ取り自動化システムの提案2020
- Author(s)
  加藤拓也、芦田崚、生島一樹、柴原正和
- Organizer
  軽金属溶接協会2020年度年次講演大会, 52
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 強化学習を用いた線状加熱の自動化に関する研究2019
- Author(s)
  前川真奈海、橋詰光、生島一樹、柴原正和
- Organizer
  溶接学会春季全国大会講演概要 Vol.104, 78-79
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] 多電極片面サブマージアーク溶接時における終端割れに及ぼす諸因子の影響に関する検討2019
- Author(s)
  前田新太郎，沖見優衣，生島一樹，谷岡俊介，木治昇，柴原正和
- Organizer
  溶接構造シンポジウム2019，388-394
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 溶接力学問題における人工知能の活用に関する研究2019
- Author(s)
  生島一樹、前川真奈海、橋詰光、柴原正和
- Organizer
  第230回溶接構造研究委員会WD230-4
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 溶接高温割れの力学シミュレーション2019
- Author(s)
  柴原正和、生島一樹、前田新太郎
- Organizer
  溶接学会春季全国大会講演概要 Vol.104, S19- S22
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] 多電極片面サブマージアーク溶接時における終端割れに及ぼす諸因子の影響に関する検討2019
- Author(s)
  沖見優衣、生島一樹、前田新太郎、谷岡俊介、木治昇、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.103, 334-335
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 強化学習を用いた線状加熱自動化に関する検討2019
- Author(s)
  三ッ井佑太，前川真奈海，生島一樹，柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.103, P-7
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] AIを用いた線状加熱方案の自動作成に関する検討2019
- Author(s)
  前川真奈海、生島一樹、野津亮、柴原正和、丹後義彦、木治昇
- Organizer
  溶接学会秋季全国大会講演概要 Vol.103, 328-329
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] AIを用いた溶接力学問題の最適化2019
- Author(s)
  橋詰光、前川真奈海、生島一樹、柴原正和
- Organizer
  溶接学会春季全国大会講演概要 Vol.104, 54-55
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] Approach for automation of line heating by combination of reinforcement learning and FEM simulation2019
- Author(s)
  Manami MAEKAWA, Kazuki IKUSHIMA, Akira Notsu and Masakazu SHIBAHARA
- Organizer
  Visual JW 2019 & WSE2019, 271-272
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02366
[Presentation] 力学モデルによる多層溶接における溶接変形簡易予測式の提案2018
- Author(s)
  臼杵龍太、生島一樹、柴原正和
- Organizer
  溶接学会春季全国大会講演概要 Vol.102, 130-131
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] 領域分割法による溶接力学解析の大規模化に関する検討2018
- Author(s)
  生島一樹，柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.103, 330-331
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] 線状加熱における加熱位置決定方法に関する検討2018
- Author(s)
  山田祐介、永里勇人、河原充、生島一樹、柴原正和
- Organizer
  第28回溶接力学シミュレーション研究会，WGWS28-3
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] 領域分割法による溶接力学解析の大規模化に関する検討2018
- Author(s)
  生島一樹, 柴原正和
- Organizer
  溶接学会全国大会
- Data Source
  KAKENHI-PROJECT-16K18324
[Presentation] 溶接力学問題に対するAIの応用2018
- Author(s)
  前川真奈海、生島一樹、柴原正和
- Organizer
  溶接学会春季全国大会講演概要 Vol.102, 128-129
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] 線状加熱における加熱位置に関する検討2018
- Author(s)
  山田祐介、前川真奈海、生島一樹、伊藤真介、柴原正和
- Organizer
  溶接学会秋季全国大会講演概要 Vol.103, 328-329
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] Ultimate strength analysis of structures considering effect of welding distortions and residual stresses2018
- Author(s)
  K. Ikushima, T. Harada, M. Shibahara
- Organizer
  7th International Maritime Conference on DESIGN FOR SAFETY
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K18324
[Presentation] 応力改善工法で付与した圧縮残留応力の持続性評価-理想化陽解法FEMを用いたショットピーニング解析手法の開発(第1報)2017
- Author(s)
  山田祐介, 柴原正和, 生島一樹, 木谷悠二, 西川聡, 古川敬, 秋田貢一, 鈴木裕士, 諸岡聡
- Organizer
  日本保全学会第14回学術講演会
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 理想化陽解法FEMを用いた溶接座屈変形解析2017
- Author(s)
  前田新太郎, 生島一樹, 柴原正和
- Organizer
  溶接構造シンポジウム2017
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] Numerical analysis of residual stress distribution after shot peening using large scale simulation2017
- Author(s)
  Y. Kitani, K. Ikushima, M. Shibahara, S. Nishikawa, T. Furukawa, K. Akita, H. Suzuki, S. Morooka
- Organizer
  7th International Conference on Welding Science and Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] Prediction of Shot Peened Residual Stresses Using Large Scale Numerical Analysis2017
- Author(s)
  Y. Kitani, K. Ikushima, M. Shibahara
- Organizer
  The 31st Asian- Pacific Technical Exchange and Advisory Meeting on Marine Structures
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] サイドビード試験を用いた低放射化フェライト鋼F82Hのレーザ溶接部における凝固割れ感受性評価2017
- Author(s)
  森裕章, 前田新太郎, 本藤裕佑, 生島一樹, 柴原正和
- Organizer
  溶接構造シンポジウム2017
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] フォーラム「溶接・接合の力学シミュレーション技術の基礎研究と実用化」大規模実用構造物の溶接変形・残留応力シミュレーション2017
- Author(s)
  柴原正和, 生島一樹
- Organizer
  平成29年度溶接学会秋季全国大会
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] Large Deformation Thermal Elastic- Plastic Analysis of Thin-plate Structure2017
- Author(s)
  S. Maeda, K. Ikushima, M. Shibahara
- Organizer
  The 31st Asian- Pacific Technical Exchange and Advisory Meeting on Marine Structures
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] Construct of friction stir welding simulation method by particle method and FEM2017
- Author(s)
  T. Ieshita, K. Ikushima, M. Shibahara, H. Miyasaka
- Organizer
  7th International Conference on Welding Science and Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] Numerical investigation of persistence of modified residual stresses due to shot peening2017
- Author(s)
  K. Ikushima, Y. Kitani, Y. Yamada, M. Shibahara, K. Akita, H. Suzuki, S. Morooka, S. Nishikawa, T. Furukawa
- Organizer
  The 70th Annual Assembly of the International Institute of Welding
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] ショットピーニングにおける圧縮残留応力の付与に関する数値解析的検討2017
- Author(s)
  山田祐介, 生島一樹, 西川聡, 古川敬, 秋田貢一, 柴原正和
- Organizer
  溶接構造シンポジウム2017
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 応力改善工法で付与した圧縮残留応力の持続性評価-理想化陽解法FEMを用いたショットピーニング解析手法の検証および圧縮残留応力の持続性に関する検討(第3報)2017
- Author(s)
  木谷悠二, 柴原正和, 生島一樹, 山田祐介, 西川聡, 古川敬, 秋田貢一, 鈴木裕士, 諸岡聡
- Organizer
  日本保全学会第14回学術講演会
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 大規模溶接熱弾塑性解析手法の実機適用2017
- Author(s)
  生島一樹、柴原正和、河原充、前田新太郎、桑原仁志、金武完明
- Organizer
  溶接構造シンポジウム2017
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] Trans-Varestraint試験の力学的検討2017
- Author(s)
  前田新太郎, 山田祐介, 生島一樹, 柴原正和, 才田一幸
- Organizer
  溶接学会全国大会
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 応力改善工法で付与した圧縮残留応力の持続性評価-ショットピーニングを施した溶接継手の熱サイクルおよび応力負荷による残留応力変化(第2報)2017
- Author(s)
  西川聡, 古川敬, 秋田貢一, 鈴木裕士, 諸岡聡, ハルヨステファヌス, 柴原正和, 生島一樹, 木谷悠二, 山田祐介
- Organizer
  日本保全学会第14回学術講演会
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 粒子法と有限要素法を用いたFSW力学解析手法の構築2017
- Author(s)
  家下輝也, 生島一樹, 宮坂史和, 柴原正和
- Organizer
  溶接構造シンポジウム2017
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] コンター法を用いた残留応力測定2017
- Author(s)
  河尻義貴, 柴原正和, 生島一樹, 河原充, 内田友樹, 宇野新平, 秋田貢一
- Organizer
  溶接構造シンポジウム2017
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 異材溶接配管継手の軸圧縮下残留応力挙動の評価2017
- Author(s)
  木谷悠二, 柴原正和, 生島一樹, 西川聡, 古川敬, 秋田貢一, 鈴木裕士, 諸岡聡, 川崎卓郎, 相澤一也, ハルヨステファヌス
- Organizer
  材料学会第51回X線材料強度に関するシンポジウム
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 溶接変形・残留応力を考慮した構造物の最終変形解析2017
- Author(s)
  生島一樹, 原田貴明, 柴原正和
- Organizer
  日本船舶海洋工学会講演会
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] Investigation on fracture mode of spot weld joint simplified fracture analysis method2017
- Author(s)
  K. Ikushima, M. Kawase, T. Yano, R. Natsume, M. Shibahara
- Organizer
  7th International Conference on Welding Science and Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 大規模熱弾塑性解析手法の実機適用2017
- Author(s)
  生島一樹, 柴原正和, 桑原仁志, 金武完明
- Organizer
  溶接構造シンポジウム2017
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 溶接継ぎ手の強度予測に向けた解析手法の構築2017
- Author(s)
  生島一樹, 川瀬充弘, 松宮大樹, 柴原正和, 大畑充
- Organizer
  溶接構造シンポジウム2017
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] T継手完全溶け込み溶接時における梨型ビード割れの発生予測2017
- Author(s)
  本藤裕佑, 山田祐介, 前田新太郎, 生島一樹, 柴原正和, 永木勇人
- Organizer
  溶接学会全国大会
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] Numerical study on weld buckling distortion in thin plate2017
- Author(s)
  S. Maeda, K. Ikushima, M. Shibahara
- Organizer
  7th International Conference on Welding Science and Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 理想化陽解法FEMを用いた溶接座屈変形解析2017
- Author(s)
  前田新太郎, 生島一樹, 柴原正和
- Organizer
  溶接構造シンポジウム2017
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] コンター法を用いた溶接残留応力計測2017
- Author(s)
  河尻義貴, 生島一樹, 河原充, 柴原正和, 宇野新平, 内田友樹
- Organizer
  溶接学会全国大会
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] Numerical study on weld buckling distortion in thin plate2017
- Author(s)
  S. Maeda, K. Ikushima, M. Shibahara
- Organizer
  7th International Conference on Welding Science and Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K18324
[Presentation] ショットピーニング時の残留応力緩和挙動に関する検討2017
- Author(s)
  木谷悠二, 柴原正和, 生島一樹, 山田祐介, 西川聡, 古川敬, 秋田貢一, 鈴木裕士, 諸岡聡
- Organizer
  日本保全学会第14回学術講演会
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 多層溶接における力学モデルを用いた溶接変形簡易予測法の提案2017
- Author(s)
  柴原正和, 臼杵龍太, 生島一樹
- Organizer
  溶接構造シンポジウム2017
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] Mechanical study on solidification cracking during laser welding2017
- Author(s)
  Y. Yamada, S. Maeda, K. Ikushima, M. Shibahara, H. Mori
- Organizer
  7th International Conference on Welding Science and Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 大規模実用構造物の溶接変形・残留応力シミュレーション2017
- Author(s)
  柴原正和, 生島一樹
- Organizer
  溶接学会全国大会
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 溶接力学問題に対するニューラルネットワークの応用について2017
- Author(s)
  前川真奈海、生島一樹、柴原正和
- Organizer
  平成29年度溶接学会秋季全国大会
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] ショットピーニング時における残留応力緩和挙動に関する数値解析的検討2017
- Author(s)
  山田祐介, 木谷悠二, 生島一樹, 柴原正和, 西川聡, 古川敬, 秋田貢一, 鈴木裕士, 諸岡聡
- Organizer
  溶接学会全国大会
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] 理想化陽解法FEMを用いた溶接座屈変形解析2017
- Author(s)
  前田新太郎, 生島一樹, 柴原正和
- Organizer
  溶接構造シンポジウム2017
- Data Source
  KAKENHI-PROJECT-16K18324
[Presentation] 溶接変形・残留応力を考慮した構造物の最終変形解析2017
- Author(s)
  生島一樹, 原田貴明, 柴原正和
- Organizer
  日本船舶海洋工学会講演会
- Data Source
  KAKENHI-PROJECT-16K18324
[Presentation] 溶接順序が溶接変形に及ぼす影響2016
- Author(s)
  松宮大樹, 貝ヶ石康平, 河原充, 生島一樹, 柴原正和, 藤永晃, 高橋毅
- Organizer
  溶接学会平成28年度秋季全国大会
- Place of Presentation
  HOTEL 天坊(群馬県渋川市)
- Year and Date
  2016-09-14
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] 理想化陽解法FEMを用いた溶接変形解析の実機適用2016
- Author(s)
  前田新太郎、原田貴明、生島一樹、河原充、柴原正和、桑原仁志、加藤大雄
- Organizer
  溶接学会平成28年度秋季全国大会
- Place of Presentation
  HOTEL 天坊(群馬県渋川市)
- Year and Date
  2016-09-14
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] 理想化陽解法FEMに基づく溶接変形解析の実機適用2016
- Author(s)
  原田貴明、生島一樹、河原充、南野寿造、桑原仁志、加藤大雄、金武完明、横道健、柴原正和
- Organizer
  溶接学会平成28年度春季全国大会
- Place of Presentation
  ATC（大阪府大阪市）
- Year and Date
  2016-04-12
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] 溶接時における薄板構造物の大変形解析2016
- Author(s)
  前田新太郎、原田貴明、生島一樹、河原充、柴原正和
- Organizer
  平成28年度溶接学会秋季全国大会
- Place of Presentation
  群馬
- Year and Date
  2016-09-14
- Data Source
  KAKENHI-PROJECT-16K18324
[Presentation] Study on Influence of Various Factors on Welding Distortion of Thin-plate Structures2016
- Author(s)
  Takaaki Harada, Shintaro Maeda, Kazuki Ikushima, Masakazu Shibahara
- Organizer
  Visual JW 2016
- Place of Presentation
  大阪
- Year and Date
  2016-10-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K18324
[Presentation] 溶接時における薄板構造物の大変形解析2016
- Author(s)
  前田新太郎、原田貴明、生島一樹、河原充、柴原正和
- Organizer
  溶接学会平成28年度秋季全国大会
- Place of Presentation
  HOTEL 天坊(群馬県渋川市)
- Year and Date
  2016-09-14
- Data Source
  KAKENHI-PROJECT-16H04605
[Presentation] Large-scale Residual Stress Analysis of Multi-pass Welded Pipe Joint Using Idealized Explicit FEM Accelerated by a GPU2015
- Author(s)
  K. Ikushima, M. Shibahara
- Organizer
  11th International Seminar Numerical Analysis of Weldability
- Place of Presentation
  Hotel Schloss Seggau, Graz, Austria
- Year and Date
  2015-09-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26889052
[Presentation] 統合的設計管理手法(TDM)を用いた開先形状の最適化に関する研究2015
- Author(s)
  斎藤俊明, 生島一樹, 河原充, 柴原正和, 高倉大典
- Organizer
  溶接学会全国大会
- Place of Presentation
  北海道科学大学(北海道札幌市)
- Year and Date
  2015-09-02
- Data Source
  KAKENHI-PROJECT-26889052
[Presentation] 理想化陽解法FEMを用いた多重パイプ溶接継手の残留応力解析2015
- Author(s)
  生島一樹
- Organizer
  溶接学会秋季全国大会
- Place of Presentation
  札幌
- Year and Date
  2015-09-02
- Data Source
  KAKENHI-PROJECT-15H04212
[Presentation] ルートギャップおよび仮付けを考慮した初層溶接時における溶接変形の解析2015
- Author(s)
  岩田昂士, 生島一樹, 柴原正和
- Organizer
  溶接学会全国大会
- Place of Presentation
  北海道科学大学(北海道札幌市)
- Year and Date
  2015-09-02
- Data Source
  KAKENHI-PROJECT-26889052
[Presentation] 理想化陽解法FEMを用いた多重パイプ継手の残留応力解析2015
- Author(s)
  生島一樹, 北村徳識, 河原充, 南野寿造, 柴原正和, 湯藤尚人, 永井昭弘, 谷和彦, 辻丈彰, 山田順也, 中谷光良
- Organizer
  溶接学会全国大会
- Place of Presentation
  北海道科学大学(北海道札幌市)
- Year and Date
  2015-09-02
- Data Source
  KAKENHI-PROJECT-26889052
[Presentation] Enhanced large-scale analysis method and its application to multi-axial pipe weld2015
- Author(s)
  K. Ikushima, T. Minamino, A. Kawahara, M. Shibahara, H. Yuto, A. Nagai, K. Tani, T. Tsuji, J. Yamada, M. Nakatani
- Organizer
  The 68th Annual Assembly of the International Institute of Welding
- Place of Presentation
  Crowne Plaza Helsinki, Helsinki, Finland
- Year and Date
  2015-06-28
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26889052
[Presentation] Analysis of Welding Deformation on Construction of Large Thin-plate Structure by Idealized Explicit FEM Using Multigrid Method2015
- Author(s)
  K. Ikushima, T. Harada, M. Shibahara
- Organizer
  11th International Seminar Numerical Analysis of Weldability
- Place of Presentation
  Hotel Schloss Seggau, Graz, Austria
- Year and Date
  2015-09-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26889052
[Presentation] Large-Scale Welding Deformation Analysis of Ship Structure by Idealized Explicit FEM2015
- Author(s)
  K. Ikushima, K. Kaigaishi, M. Shibahara
- Organizer
  25th Annual International Ocean and Polar Engineering Conference
- Place of Presentation
  Hilton Waikola Village, Waikola, Kona, Hawaii
- Year and Date
  2015-06-21
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26889052
[Presentation] 大型円筒構造物における溶接変形低減のための製作方法の検討2015
- Author(s)
  山田順也, 山里久仁彦, 中谷光良, 河原充, 南野寿造, 生島一樹, 柴原正和
- Organizer
  溶接学会全国大会
- Place of Presentation
  北海道科学大学(北海道札幌市)
- Year and Date
  2015-09-02
- Data Source
  KAKENHI-PROJECT-26889052
[Presentation] 狭開先2トーチ高速円周MAG溶接時における凝固割れに関する力学的検討
- Author(s)
  柴原正和, 生島一樹, 原田貴明, 木村文映, 森本拓世
- Organizer
  溶接構造シンポジウム2014
- Place of Presentation
  大阪大学銀杏会館（大阪、吹田）
- Year and Date
  2014-12-04 – 2014-12-05
- Data Source
  KAKENHI-PROJECT-26889052
[Presentation] Study on Welding Distortion of a Stiffened Thin Plate Structure Using Idealized Explicit FEM
- Author(s)
  K. Ikushima, M. Shibahara
- Organizer
  The International Symposium on Visualization in Joining & Welding Science Through Advanced Measurements and Simulation
- Place of Presentation
  Hotel Hankyo Expo Park (Suita, Osaka)
- Year and Date
  2014-11-26 – 2014-11-28
- Data Source
  KAKENHI-PROJECT-26889052

1. Shibahara Masakazu (20350754)

# of Collaborated Projects: 4 results

# of Collaborated Products: 108 results
2. Murakawa Hidekazu (60166270)

# of Collaborated Projects: 3 results

# of Collaborated Products: 1 results
3. 才田一幸 (30178470)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. 辰巳晃 (60736487)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. 小森山祐輔 (90805110)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
6. 前田新太郎 (30975339)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
7. 芹澤久 (20294134)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. 田中智行 (20452609)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. 岡田裕 (50281738)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. 伊藤真介 (50535052)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
11. 大沢直樹 (90252585)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. 藤公博 (80790716)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results

Ikushima Kazuki 生島 一樹

Research Projects

Research Products

Co-Researchers

Evaluation of uncertainty in ship structural collapse behavior and risk at time of damage using construction and strength-linked analysisPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Four-Dimensional Visualization of Thermal Processing in Ship Hull Fabrication and Establishment of Crack Prevention Using Digital Twins

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of an innovative prediction method for predicting mechanical behavior during metal additive manufacturingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Clarification of uncertainty in ultimate strength of ship structure by developing integrated analysis system of construction, strength and reliabilityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Systematization of analysis for welding hot cracking and establishment of crack prevention method using AI

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of full-automatic line heating system

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Structural analysis of ship hull using ultra large-scale welding mechanics analysis and collapse analysisPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of 4 Dimensional CAE Visualization System for Assessment of Quality and Safety of Structures through Life Time Starting from Production

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Investigation on mitigation of welding deformation on assembly of ship hull block using ultra large scale analysis methodPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Shell–solid Coupling Analysis for Mechanical Behavior of Complex Thin-plate Weld Structure2023

Author(s)

Journal Title

DOI

ISSN

Language

Data Source

[Journal Article] Study on Application of Efficient FE Modeling Technique in Analysis of Welding Mechanics2023

Author(s)

Journal Title

DOI

ISSN

Language

Data Source

[Journal Article] Study on Mechanical Behavior during Friction Stir Welding Using Numerical Simulation2021

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Ikushima Kazuki 生島一樹