• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

FUJIO Hiroshige  藤尾 博重

ORCIDConnect your ORCID iD *help
Researcher Number 90026097
External Links
Affiliation (based on the past Project Information) *help 1995 – 2002: Kyoto University, Graduate School of Engineering, Associate professor, 工学研究科, 助教授
1994: Kyoto Univ., Dept Prec.Engrng, Ass.Prof., 工学部, 助教授
1989 – 1993: 京都大学, 工学部, 助手
Review Section/Research Field
Principal Investigator
設計工学・機械要素・トライボロジー / 機械要素
Except Principal Investigator
設計工学・機械要素・トライボロジー / 機械要素
Keywords
Principal Investigator
位相 / 斜入射干渉法 / Laser / レーザ / Phase / Interferometry / 作用平面 / 歯車 / フリンジスキャン法 / 歯面形状偏差 … More / CCD Image Sensor / Digital Data / Data Processing / Phase Concatenation / Shaving Cutter / CCDイメージセンサ / シェービングカッタ / CCDイメージセンサー / デジタルデータ / 画像処理 / 位相接続 / Form deviation / 形状偏差 / 位相シフト法 / Gear / Hologram / 歯面誤差 / 歯車精度 / ホログラム / Nick / Distribution of Intensity / large Incident Angle / Principle of Huygens-Fresnel / ホログラフィ / 強度分布 / 強度 / ホイエインス-フレネルの原理 / 打痕 / 高度分布 / ホイエンス-フレネルの原理 / Phase Shifting Method / ベストフィット法 / 光学系設定誤差 / 干渉縞像 / ねじれ角 / はすば歯車 / 歯車形工具 / 非接触測定 / シェービングカッター / Measurement / Phase shift method / Phase difference / Involute gear / 干渉計 / 形状誤差 / インボリュート曲線 / 干渉法 / インボリュート曲面 / 計測 / 精度測定 / 位相差 / Plane of action / Tooth form deviation / Gear accuracy / Phase stepping method / フリンジスチヤン法 / 君車精度 / 千渉計 / レーザー / 光計測 / Plane of Action / Gear Accuracy / Fringe Scanning Method / Laser Horography / レ-ザホログラフィ … More
Except Principal Investigator
歯車 / Laser / レーザ / Gear / 損傷予知 / 歯当たり / Gear quality / CBN Grinding / Grinding / Hard Finishing / Repeatability / Measuring Error / Heterodyne Interferometry / Non-Contacting Measuring Method / 3-Dimensional Curved Surface / Calibrating Method / Second Master / 歯車精度保証 / 曲面形状精度 / レーザ測定 / 2次原器 / マスターアーティファクト / 精度基準原器 / トレーサビリティー / 精度検定 / インボリュート形状 / 測定誤差 / 再現性 / 精度 / ヘテロダイン干渉法 / インボリュート曲線 / 2次マスター / Contaminant / Damage / Strength / Reliability / Micro machine / 歯面強度 / マイクロ歯車 / 損傷モード / 歯車精度 / コンタミナント / 損傷 / 強度 / 信頼性 / マイクロマシン / Tooth Flank Form / CCD Image Sensor / Digital Data / Data Processing / Phase / Computer Holographic Measurement / Interferometry / 形状誤差 / 干渉計 / 精度測定 / 形状偏差 / 位相シフト法 / 位相差 / 歯車歯面形状 / CCDイメージセンサ / デジタルデータ / 画像処理 / 位相 / コンピュータホログラフィック測定 / 斜入射干渉法 / Failure prediction / Designing method / Pattern recognition / Tooth contact pattern / Gears / 設計法 / パターン認識 / Failure Prediction / Transmission Error / Simulation / Tooth Contact pattern / Bevel Gear / Hypoid Gear / シミュレ-ション / シミュレーション / 伝達誤差 / かさ歯車 / ハイポイドギヤ / Gear Quality / gear quality / CBN grinding / grinding Less
  • Research Projects

    (12 results)
  • Co-Researchers

    (4 People)
  •  Development of High-Efficiently Calibrating Method of the Second Master with 3-Dimensional Curved Surface

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      2000 – 2002
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Rapid Detection of Tooth Form Deviation of Cylindrical Involute Gear by Laser HolographyPrincipal Investigator

    • Principal Investigator
      FUJIO Hiroshige
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Study on Measurement of Tooth Fom Deviation of Helical Gear by Laser InterferometryPrincipal Investigator

    • Principal Investigator
      FUJIO Hiroshige
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Measurement of Tooth Fom Deviation of Gear-Shaped Tools by Laser InterferometryPrincipal Investigator

    • Principal Investigator
      FUJIO Hiroshige
    • Project Period (FY)
      1996 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Failure mode analysis of micro machine gears and the limitation of micronization

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      1995 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Computer Holographic Measurement of Machine Parts by Laser Interferometry

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      1994 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Contact Free Measurement of Tooth Form Deviation (of Involute Gear Using Laser Interferometry)Principal Investigator

    • Principal Investigator
      FUJIO Hiroshige
    • Project Period (FY)
      1994 – 1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Prediction of Gear Performance based on Recognition of Tooth Contact Pattern

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      1993 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Contact Free Measurement of Tooth Form Deviation of Involute Gear Using Laser InterferometryPrincipal Investigator

    • Principal Investigator
      FUJIO Hiroshige
    • Project Period (FY)
      1992 – 1993
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械要素
    • Research Institution
      KYOTO UNIVERSITY
  •  Fundamental research on performance and failure prediction for hypoid/bevel gears

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      1991 – 1992
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械要素
    • Research Institution
      KYOTO UNIVERSITY
  •  Contact Free Measurement of Three-Dimensional Curved Surface Using Laser Holographic InterferometryPrincipal Investigator

    • Principal Investigator
      FUJIO Hiroshige
    • Project Period (FY)
      1990 – 1991
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械要素
    • Research Institution
      Kyoto University
  •  Generating CBN Grinding of 3 Dimensional Curved Surface of Machine Parts

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      1989 – 1990
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械要素
    • Research Institution
      Kyoto University
  • 1.  KUBO Aizoh (10027899)
    # of Collaborated Projects: 12 results
    # of Collaborated Products: 0 results
  • 2.  NONAKA Tetsuya (00180761)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 0 results
  • 3.  YABE Hiroshi (30025936)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 4.  KAKINO Yoshiaki (00026204)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi