• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

TSUTSUMI Masaomi  堤 正臣

ORCIDConnect your ORCID iD *help
… Alternative Names

TSUTSUMI Masaoni  堤 正臣

Less
Researcher Number 90108217
Other IDs
External Links
Affiliation (Current) 2025: 東京農工大学, 工学(系)研究科(研究院), 名誉教授
Affiliation (based on the past Project Information) *help 2010: 国立大学法人東京農工大学, 大学院・工学研究院, 教授
2010: Tokyo University of Agriculture and Technology, 大学院・工学研究院, 教授
2007 – 2009: 東京農工大学, 大学院・共生科学技術研究院, 教授
2006: Tokyo University of Agriculture and Technology, Institute of Symbiotic Science and Technology, Professor, 大学院共生科学技術研究院, 教授
2004 – 2005: 東京農工大学, 大学院・共生科学技術研究部, 教授 … More
2004: National University Corporation Tokyo University of Agriculture and Technology, Institute of Symbiotic Science and Technology, Professor, 大学院・共生科学技術研究部, 教授
2003: 東京農工大学, 大学院・生物システム応用科学研究科, 教授
2001: Tokyo University of Agriculture and Technology, Graduate School of Bio-Applications and Systems Engineering, Professor, 大学院・生物システム応用科学研究科, 教授
2000 – 2001: 東京農工大学, 生物システム応用科学研究科, 教授
1988 – 1993: Tokyo University of Agriculture and Technology,Professor, 工学部, 教授
1986 – 1987: 東京農工大学, 工学部, 助教授 Less
Review Section/Research Field
Principal Investigator
Production engineering/Processing studies / 機械工作 / 機械工作・生産工学
Except Principal Investigator
機械工作 / Production engineering/Processing studies / 機械力学・制御工学
Keywords
Principal Investigator
マシニングセンタ / 幾何偏差 / 工作機械 / geometric deviation / 主軸頭旋回形 / テーブル旋回形 / 5軸制御マシニングセンタ / 多軸制御工作機械 / 仕上げ面 / 運動精度 … More / 同時5軸制御 / 機構誤差 / サーボ誤差 / ボールバー / 5軸制御 / simultaneous five-axis control / simultaneous two-axis control / servo error / pitch error / five-axis controlled machining centers / multi-axis machine tools / 同期精度 / 同時2軸制御 / multi-tasking machine / rotary axis / compensation method / identification method / five-axis machining center / multi-axis machine tool / 幾何精度 / 同定 / 機構解析 / 5軸 / 複合加工機 / 旋回軸 / 補正方法 / 同定方法 / mold / tool path / machining center / ball-end-mill / surface finish / 金型 / 工具経路 / ボールエンドミル / Performance Evaluation / Working Accuracy / Finished Surface / Roughness Profile / Surface Roughness / Motion Accuracy / Geometric Accuracy / Machine tool / 真円形状 / 回転精度 / 運動誤差 / 表面粗さ / 断面評価 / 性能評価 / 工作精度 / 仕上面 / 断面曲線 / 表面あらさ / 幾何学的精度 / R-test / 輪郭形状精度 / 5軸マシニングセンタ / ピッチ誤差 / 四角すい台 / 円すい台 / 制御 / 機械力学 / 精密部品加工 / シミュレーション工学 / 生産工学 / dN値 / アンギュラ-玉軸受 / オイルエア潤滑 / オイルミスト潤滑 / 主軸 … More
Except Principal Investigator
超音波 / エンドミル / 疲労寿命 / 機械加工 / ナノ結晶 / 表面改質 / 工具 / 切削 / Filling Process / Metal Mold / Pulse Echo Technique / Ultrasonic / Monitoring System / Molding Process / パルス反射法 / プラスチック / 金型 / 射出成形 / Tool Wear / Reflection Factor / Ultrasonic Waves / In-Process Sensor / Identification of Cutting Process / 工作物寸法 / 工具摩耗 / 反射率 / インプロセスセンサ / 切削状態認識 / sintered nylon / piezo-electric actuater / linear motor / resin concrete / ceramics / new material / 異方性エッチング / 送り機構 / セラミクス / ナイロン焼接体 / 超精密 / 電歪素子 / リニアモータ / レジンコンクリート / セラミックス / 新素材 / Surface hardness / Surface enhancement / Nanocrystalline Structure / Functional surface / Burnishing / Friction burnishing / Tool / Cutting / あらさ / ショットピーニング / 残留応力 / 表面硬化 / 機能表面 / バニシング / 摩擦攪拌 / Compensation Control / Thermal Deformation / Estimation of Deformation / Disturbance in Environment / Ultra Precision Feed Mechanism / Ultra Precision Spindle / Ultra Precision Machine Tool / Ultra Precision Machining / 変形制御 / シミュレ-ション / 加工精度 / 微小変形 / 補正制御 / 熱変形 / 変形の予測 / 微小環境変化 / 精密送り機構 / 超精密主軸 / 超精密工作機械 / 超精密加工 / piezo-electric / Application of Vibration / Ultrasonic Motor / Linear Drive / Ultrasonic Vibration / 速度特性 / 駆動力特性 / 進行波 / リニア駆動システム / 振動利用 / 超音波モ-タ / リニア駆動 / 超音波振動 / 耐食性 / 摩擦攪拌バニシング / 切削油剤 / ばり / 超硬合金工具 / 工具寿命 / 仕上げ面粗さ / 工具損傷 / 超音波振動切削 / CFRP Less
  • Research Projects

    (14 results)
  • Research Products

    (95 results)
  • Co-Researchers

    (19 People)
  •  Estimation and diagnosis of accuracy of workpiece machined by simultaneous five-axis controlPrincipal Investigator

    • Principal Investigator
      TSUTSUMI Masaomi
    • Project Period (FY)
      2008 – 2010
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Formation of Nanocrystalline Structure on the Metal Surface Layer and its Enhancement by Cutting-Frictional Stir Burnishing Combined Process

    • Principal Investigator
      SASAHARA Hiroyuki
    • Project Period (FY)
      2007 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Mechanically Functional Surface Generation by Cutting-FrictionStir Burnishing Combined Process

    • Principal Investigator
      SASAHARA Hiroyuki
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Accuracy prediction of workpieces considering machine errors of multi-axis machine tools and its identificationPrincipal Investigator

    • Principal Investigator
      TSUTSUMI Masaomi
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Identification and compensation of the deviations inherent to multi-axis machine toolsPrincipal Investigator

    • Principal Investigator
      TSUTSUMI Masaomi
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      National University Corporation Tokyo University of Agriculture and Technology
  •  Generating Regular Patterns on Mold Surface by 5-Axis control Ball-End MillingPrincipal Investigator

    • Principal Investigator
      TSUTSUMI Masaoni, 趙 暁明
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Performance Evaluation of Machine Tools Based on Roughness Profile in Surface FinishPrincipal Investigator

    • Principal Investigator
      TSUTSUMI Masaomi
    • Project Period (FY)
      1992 – 1993
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械工作
    • Research Institution
      TOKYO UNIVERSITY OF AGRICULTURE AND TECHNOLOGY
  •  CFRPの超音波振動切削における工具の摩耗損傷形態

    • Principal Investigator
      飯島 昇
    • Project Period (FY)
      1990
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Simulation and Control of Deformations for Next Generation of Ultra Precision Machine Tools

    • Principal Investigator
      MORIWAKI Toshimichi
    • Project Period (FY)
      1990 – 1991
    • Research Category
      Grant-in-Aid for Co-operative Research (A)
    • Research Field
      機械工作
    • Research Institution
      Kobe University
  •  空気援用潤滑による工作機会主軸の高速化Principal Investigator

    • Principal Investigator
      堤 正臣
    • Project Period (FY)
      1989
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Development of Linear Drive System by Ultrasonic Vibration

    • Principal Investigator
      NAGAI Masao
    • Project Period (FY)
      1989 – 1990
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B).
    • Research Field
      機械力学・制御工学
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Measuring Methods for Molding Process of Plastics by Using Ultrasonic Wave

    • Principal Investigator
      NISIWAKI Nobuhiko
    • Project Period (FY)
      1987 – 1988
    • Research Category
      Grant-in-Aid for Developmental Scientific Research
    • Research Field
      機械工作
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Application of New Materials to Designing of "Nano-mechanism"

    • Principal Investigator
      FURUKAWA Yuji
    • Project Period (FY)
      1986 – 1987
    • Research Category
      Grant-in-Aid for Co-operative Research (A)
    • Research Field
      機械工作
    • Research Institution
      Tokyo Metropolitan University
  •  Study on In-Process Sensor Using Ultrasonic Waves with Complex Function Type for ldentification of Cutting Process

    • Principal Investigator
      ITOH Shuzo
    • Project Period (FY)
      1986 – 1987
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Tokyo Institute of Technology

All 2011 2010 2009 2008 2007 2006 2005 2004 2003

All Journal Article Presentation

  • [Journal Article] 主軸頭テーブル旋回形5軸制御マシニングセンタの幾何偏差同定方法の-般化2011

    • Author(s)
      堤正臣, 深山直記, 崔成日, 佐伯智之, 齋藤明徳
    • Journal Title

      日本機械学会論文集 77巻

      Pages: 1597-1608

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Journal Article] 主軸頭テーブル旋回形5軸制御マシニングセンタの幾何偏差同定方法の一般化2011

    • Author(s)
      堤正臣, 深山直記, 崔成日, 佐伯智之, 齋藤明徳
    • Journal Title

      日本機械学会論文集

      Volume: 77 Pages: 1597-1608

    • NAID

      130000873601

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Journal Article] テーブル旋回形5軸マシニングセンタの回転軸中心線推定方法2011

    • Author(s)
      山本通、堤正臣
    • Journal Title

      精密工学会誌 77巻

      Pages: 316-321

    • NAID

      130005030092

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Journal Article] テーブル旋回形5軸マシニングセンタの回転軸中心線推定方法2011

    • Author(s)
      山本通, 堤正臣
    • Journal Title

      精密工学会誌

      Volume: 77 Pages: 316-321

    • NAID

      130005030092

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Journal Article] 微細溝切削による5軸制御マシニングセンタの工作精度試験方法の開発2011

    • Author(s)
      山本通、長谷部孝男、堤正臣
    • Journal Title

      精密工学会誌 77巻

      Pages: 405-410

    • NAID

      130001155796

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Journal Article] 微細溝切削による5軸制御マシニングセンタの工作精度試験方法の開発2011

    • Author(s)
      山本通, 長谷部孝男, 堤正臣
    • Journal Title

      精密工学会誌

      Volume: 77 Pages: 405-410

    • NAID

      130001155796

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Journal Article] 四角すい台の仕上げ加工に基づく5軸マシニングセンタの工作精度試験方法の開発2011

    • Author(s)
      堤正臣, 佐伯智之, 木落清志郎, 崔成日, 井原之敏
    • Journal Title

      日本機械学会論文集

      Volume: 77(掲載決定)

    • NAID

      130001055372

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Journal Article] Avaliacao do movimento sincrono na usinagem com cinco eixos e mesa rotativa basculante2009

    • Author(s)
      M.Tsutsumi, D.Yumiza, K.Utsumi, R.Sato
    • Journal Title

      Maquinase Metais 45

      Pages: 88-111

    • Data Source
      KAKENHI-PROJECT-20360063
  • [Journal Article] テーブル旋回形5軸制御マシニングセンタの幾何偏差同定方法の一般化2009

    • Author(s)
      深山直記, 佐伯智之, 崔成日, 堤正臣
    • Journal Title

      日本機械学会論文集 75

      Pages: 2335-2342

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Journal Article] 旋盤形複合加工機に存在する幾何偏差同定方法2009

    • Author(s)
      崔成日、東山憲司、堤正臣、K.M.M.DASSANAYAKE
    • Journal Title

      日本機械学会論文集(C編) 75巻

      Pages: 476-483

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Journal Article] テーブル旋回形5軸制御マシニングセンタの幾何偏差同定方法の-般化2009

    • Author(s)
      深山直記、佐伯智之、崔成日、堤正臣
    • Journal Title

      日本機械学会論文集(C編) 75巻

      Pages: 2335-2342

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Journal Article] Evaluation of Synchronous Motion in Five-axis Machining Centers With a Tilting Rotary Table,2007

    • Author(s)
      M.TSUTSUMI, D.YUMIZA, K.UTSUMI, R.SATO
    • Journal Title

      Journal of Advanced Mechanical Design, Systems, and Manufacturing vol.1, No.1

      Pages: 24-35

    • NAID

      130000080412

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] Evaluation of Synchronous Motion in Five-axis Machining Centers With a Tilting Rotary Table,2007

    • Author(s)
      M.TSUTSUMI, D.YUMIZA, K.UTSUMI, R.SATO
    • Journal Title

      J. of Advanced Mechanical Design, Systems, and Manufacturing 1

      Pages: 24-35

    • NAID

      130000080412

    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] Evaluation of Synchronous Motion in Five-axis Machining Centers With a Tilting Rotary Table2007

    • Author(s)
      M.TSUTSUMI, D, YUMIZA, K.UTSUMI, R.SATO
    • Journal Title

      J. of Advanced Mechanical Design, Systems, and Manufacturing 1

      Pages: 24-35

    • NAID

      130000080412

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] 5軸制御マシニングセンタの静的精度測定方法(ISO 17091-6のK6の有効性とその応用)2006

    • Author(s)
      堤正臣, K.M.Muditha Dassanayake, 齊藤明徳, 三上滋崇
    • Journal Title

      日本機械学会論文集 72

      Pages: 916-922

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] A strategy for identifying static deviations in universal spindle head type multi-axis machining centers2006

    • Author(s)
      K.M.Muditha Dassanayake, Masaomi Tsutsumi, Akinori Saito
    • Journal Title

      International Journal of Machine Tools and Manufacture vol.46

      Pages: 1097-1106

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] 切削-バニシング複合加工工具の開発とその基本特性 -エンドミルタイプ複合加工工具の提案と加工表面への圧縮残留応力生成-2006

    • Author(s)
      瀬川俊明, 笹原弘之, 石川達郎, 村瀬寛恭, 堤正臣
    • Journal Title

      精密工学会誌 72・7

      Pages: 909-913

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] A methodology for identifying inherent deviations in universal spindle head type multi-axis machines by simultaneous five-axis control motions2006

    • Author(s)
      K.M.Muditha, Dassanayake, Ken Yamamoto, Masaomi Tsutsumi
    • Journal Title

      Proceedings of IMECE2006, 2006 ASME International Me chanical Engineering Congress and Exposition

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] 5軸制御マシニングセンタの同期精度評価方法に関する研究2006

    • Author(s)
      弓座大輔, 内海敬三, 堤正臣, 佐藤隆太
    • Journal Title

      日本機械学会九州支部講演論文集 068-1

      Pages: 179-180

    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] 5軸制御マシニングセンタの同期運動精度測定方法2006

    • Author(s)
      弓座大輔, 内海敬三, 堤正臣, 佐藤隆太
    • Journal Title

      日本機械学会論文集 72

      Pages: 3672-3678

    • NAID

      110004997445

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] Measurement method for geometric deviations for five-axis machining centers (a method by means of a ball and a linear displacement sensor)2006

    • Author(s)
      K.Utsumi, T.Kosugi, A.Saito, M.Tsutsumi
    • Journal Title

      Transaction of Japan Society for Mechanical Engineers vol.72

      Pages: 3672-3678

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] A methodology for identifying inherent deviations in universal spindle head type multi-axis machines by simultaneous five-axis control motions2006

    • Author(s)
      K.M.M.Dassanayake, K.Yamamoto, M.Tsutsumi
    • Journal Title

      Proceedings of IMECE2006 (2006 ASME International Mechanical Engineering Congress and Exposition)

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] Accuracy Assessment of Synchronous Motion in Five-axis Machining Centers2006

    • Author(s)
      D.Yumiza, K.Utsumi, M.Tsutsumi, R.Sato
    • Journal Title

      Proceedings of the CIRP 2nd International Conference on High Performance Cutting vol.2 (CD-ROM)

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] A strategy for identifying static deviations in universal spindle head type multi-axis machining centers2006

    • Author(s)
      K.M.Muditha Dassanayake, Masaomi Tsutsumi, Akinori Saito
    • Journal Title

      International Journal of Machine Tools and Manufacture 46

      Pages: 1097-1106

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] 5軸マシニングセンタの静的精度測定方法-ISO10791-6のK6の有効性とその応用2006

    • Author(s)
      堤正臣, M.Dassanayake, 齊藤明徳
    • Journal Title

      日本機械学会論文集C編 72・715

      Pages: 916-922

    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] New technologies for accuracy evaluation of five-axis controlled machining centers2006

    • Author(s)
      Masaomi Tsutsumi
    • Journal Title

      Proc. 12^<th> Inter. Machine Tool Eng. Conf. 12

      Pages: 126-138

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] Measurement method for synchronous motion accuracy in five-axis machining centers2006

    • Author(s)
      D.Yumiza, K.Utsumi, M.Tsutsumi, R.Sato
    • Journal Title

      Transaction of Japan Society for Mechanical Engineers vol.72

      Pages: 3679-3686

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] A methodology for identifying inherent deviations in universal spindle head type multi-axis machines by simultaneous five-axis control motions2006

    • Author(s)
      K.M, Muditha.Dassanayake, Ken.Yamamoto, Masaomi tsutsumi
    • Journal Title

      Proceedings of IMECE2006, 2006 ASME International Mechanical Engineering Congress and Exposition

    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] Formation of Nanocrystalline Structure on the Surface Layer by Friction Stir Burnishing2006

    • Author(s)
      Hiroyuki SASAHARA, Tomohiko YATA, Toshiaki SEGAWA, Masaomi TSUTSUMI
    • Journal Title

      Proc. 6th Int. Conf. EUSPEN, Baden bei Wien

      Pages: 344-347

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 5軸制御工作機械の静的精度測定方法(球と変位計とを用いた測定方法)2006

    • Author(s)
      内海敬三, 小杉達寛, 齋藤明徳, 堤正臣
    • Journal Title

      日本機械学会論文集 72

      Pages: 2293-2298

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] New technologies for accuracy evaluation of five-axis controlled machining centers2006

    • Author(s)
      Masaomi Tsutsumi
    • Journal Title

      Proc. 12_<th> Inter. Machine Tool Eng. Conf. 12

      Pages: 126-138

    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] 摩擦攪拌形バニシング工具による表面改質(第二報)-安定した厚いナノ結晶層の創成-2006

    • Author(s)
      矢田智彦, 笹原弘之, 村瀬寛恭, 富永啓介, 堤 正臣
    • Journal Title

      2006年度精密工学会秋季大会学術講演会講演論文集

      Pages: 891-892

    • NAID

      130004658406

    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Formation of Nanocrystalline Structure on the Surface Layer by Friction Stir Burnishing2006

    • Author(s)
      Hiroyuki SASAHARA, Tomohiko YATA, Toshiaki SEGAWA, Masaomi TSUTSUMI
    • Journal Title

      Proc.6th.Int.Conf.EUSPEN,Baden bei Wien

      Pages: 344-347

    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Measurement method for geometric deviations in five-axis machine tools (Effectiveness of the clause K6 in ISO10791-6 and its application)2006

    • Author(s)
      M.Tsutsumi, K.M.M.Dassanayake, A.Saito, S.Mikami
    • Journal Title

      Transaction of Japan Society for Mechanical Engineers vol.72

      Pages: 916-922

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] Identifying method of geometric deviations in five-axis machining centers with a tilting rotary table2006

    • Author(s)
      M.Tsutsumi, K.Yamamot, A.Saito, K.M.M.Dassanayake
    • Journal Title

      Transaction of Japan Society for Mechanical Engineers vol.72

      Pages: 3679-3686

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] A strategy for identifying static deviations in universal spindle head type multi-axis machining centers2006

    • Author(s)
      M Dassanayake, M.Tsutsumi, A.Satio
    • Journal Title

      International Journal of Machine Tools and Manufactures 46・9(決定)

    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] 摩擦攪拌形バニシング工具による表面改質 (第二報)-安定した厚いナノ結晶層の創成-2006

    • Author(s)
      矢田智彦, 笹原弘之, 村瀬寛恭, 富永啓介, 堤 正臣
    • Journal Title

      2006年度精密工学会秋季大会学術講演会講演論文集

      Pages: 891-892

    • NAID

      130004658406

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] New technologies for accuracy evaluation of five-axis controlled machining centers2006

    • Author(s)
      Masaomi Tsutsumi
    • Journal Title

      Proc. 12^<th> Inter.Machine Tool Eng.Conf. vol.12

      Pages: 126-138

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] Development of Cutting-Burnishing Combined Tool and Its Basic Performance -Compressive Residual Stress Generation within the Machined Surface by the End-mill Type Combined Tool-2006

    • Author(s)
      Toshiaki SEGAWA, Hiroyuki SASAHARA, Tasturo ISHIKAWA, Hiroyuki MURASE, Masaomi TSUTSUMI
    • Journal Title

      Journal of the Japan Society for Precision Engineering Vol.72

      Pages: 909-913

    • NAID

      110004744889

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 切削-バニシング複加工工具の開発とその基本特性-エンドミルタイプ複合加工工具の提案と加工表面への圧縮残留応力生成-2006

    • Author(s)
      瀬川俊明, 笹原弘之, 石川達郎, 村瀬寛恭, 堤正臣
    • Journal Title

      精密工学会誌 72・7

      Pages: 909-913

    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Surface Enhancement by Friction Stir Burnishing (2^<nd> report) - Formation of constant thick nanocrystalline structure-2006

    • Author(s)
      Tomohiko YATA, Hiroyuki SASAHARA, Hiroyuki MURASE, Keisuke TOMINAGA, Massaomi TSUTSUMI
    • Journal Title

      2006 JSPE Autumn Meeting

      Pages: 891-892

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 同時5軸制御による主軸頭旋回形5軸制御マシニングセンタの幾何偏差同定方法2006

    • Author(s)
      堤正臣, 山元健, 齊藤明徳, K.M.Muditha Dassanayake
    • Journal Title

      日本機械学会論文集 72

      Pages: 3679-3686

    • NAID

      110004997446

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] マシニングセンタの同時5軸制御運動に及ぼす幾何精度の影響2006

    • Author(s)
      山元健, 堤正臣, 齊藤明徳
    • Journal Title

      日本機械学会九州支部講演論文集 068-1

      Pages: 177-178

    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] Accuracy Assessment of Synchronous Motion in Five-axis Machining Centers2006

    • Author(s)
      Daisuke Yumiza, Keizo Utsumi, Masaomi Tsutsumi, Ryuta Sato
    • Journal Title

      Proceedings of the CIRP 2nd International Conference on High Performance Cutting 2(CD-ROM)

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360059
  • [Journal Article] Formation of Nanocrystalline Structure on the Surface Layer by Friction Stir Burnishing2006

    • Author(s)
      Hiroyuki SASAHARA, Tomohiko YATA, Toshiaki SEGAWA, Masaomi TSUTSUMI
    • Journal Title

      Proc. 6th Int.Conf.EUSPEN, Baden bei Wien

      Pages: 344-347

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 圧縮残留応力を生成する平面加工用複合加工工具の開発(第2報)-ピンの押し付け力とピンの材質が加工面に及ぼす影響-2005

    • Author(s)
      笹原弘之, 村瀬寛恭, 石川達郎, 矢田智彦, 瀬川俊明, 東海林斉, 千屋宏幸, 堤正臣
    • Journal Title

      2005年度精密工学会秋季大会学術講演会講演論文集

      Pages: 1181-1182

    • NAID

      130004656747

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Surface Enhancement by Friction Stir Burnishing2005

    • Author(s)
      Tomohiko YATA, Hiroyuki SASAHARA, Toshiaki SEGAWA, Masaomi TSUTSUMI
    • Journal Title

      Proc 3rd Leading Edge Manufacturing 21st Century (LEM21), Nagoya

      Pages: 547-552

    • NAID

      130004656863

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Surface Enhancement by Friction Stir Burnishing2005

    • Author(s)
      Hiroyuki SASAHARA, Tomohiko YATA, Hiroyuki MURASE, Toshiaki SEGAWA, Massaomi TSUTSUMI
    • Journal Title

      2005 JSPE Autumn Meeting

      Pages: 243-244

    • NAID

      130004656863

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Surface Enhancement by Friction Stir Burnishing2005

    • Author(s)
      Tomohiko YATA, Hiroyuki SASAHARA, Toshiaki SEGAWA, Masaomi TSUTSUMI
    • Journal Title

      Proc 3rd Leading Edge Manufacturing 21st Century (LEM21),

      Pages: 547-552

    • NAID

      130004656863

    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 摩擦攪拌形バニシング工具による表面改質2005

    • Author(s)
      笹原弘之, 矢田智彦, 村瀬寛恭, 瀬川俊明, 堤正臣
    • Journal Title

      2005年度精密工学会春季大会学術講演会講演論文集

      Pages: 243-244

    • NAID

      130004656863

    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Development of a new tool for cutting-burnishing combined process to generate high compressive residual stress (2nd report)2005

    • Author(s)
      Hiroyuki SASAHARA, Hiroyuki MURASE, Tatsuro ISHIKAWA, Tomohiko YATA, Toshiaki SEGAWA, Hitoshi TOUKAIRIN, Hiroyuki CHIYA, Masaomi TSUTSUMI
    • Journal Title

      2005 JSPE Autumn Meeting

      Pages: 1181-1182

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 摩擦攪拌形バニシング工具による表面改質2005

    • Author(s)
      笹原弘之, 矢田智彦, 村瀬寛恭, 瀬川俊明, 堤正臣
    • Journal Title

      2005年度精密工学会秋季大会学術講演会講演論文集

      Pages: 243-244

    • NAID

      130004656863

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Testing method of geometric accuracy of five-axis control machining center by means of ball and displacement sensor2005

    • Author(s)
      Yusuke Okamoto, Masaomi TSUTSUMI, Hirotatsu KOSUGI, Keizo Utsumi
    • Journal Title

      Proceedings of JSPE Annual Spring Conference for Undergraduate Students

      Pages: 23-24

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360066
  • [Journal Article] 球と変位計を用いた5軸制御マシニングセンタのの精度試験方法2005

    • Author(s)
      岡本裕介, 堤正臣, 小杉達寛, 内海敬三
    • Journal Title

      精密工学会卒業研究発表会講演論文集

      Pages: 23-24

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360066
  • [Journal Article] Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting rotary table by means of four axis control movements2004

    • Author(s)
      M.Tsutsumi, A.Saito
    • Journal Title

      Int.J.of Machine Tools and Manufacture 44

      Pages: 1333-1342

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360066
  • [Journal Article] 球と変位計を用いた5軸制御マシニングセンタ幾何精度測定方法2004

    • Author(s)
      小杉達寛, 内海敬三, 堤正臣, 齋藤明徳
    • Journal Title

      第5回日本機械学会生産加工・工作機械部門講演論文集

      Pages: 151-152

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360066
  • [Journal Article] Measurement method of geometric accuracy of five-axis control machining center by means of ball and displacement sensor2004

    • Author(s)
      Hirotatsu Kosugi, Keizo Utsumi, Masaomi TSUTSUMI, Akinori Saito
    • Journal Title

      Proceedings of Machine Tool and Manufacturing Devision, JSME Conference

      Pages: 151-152

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360066
  • [Journal Article] 5軸制御マシニングセンタ精度試験方法の体系化2004

    • Author(s)
      小杉達寛, 内海敬三, 堤正臣
    • Journal Title

      精密工学会春季大会学術講演会講演論文集

      Pages: 441-442

    • NAID

      130004656125

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360066
  • [Journal Article] Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements2004

    • Author(s)
      Masaomi TSUTSUMI, Akinori SAITO
    • Journal Title

      International Journal of Machine Tools and Manufacture Vol.44

      Pages: 1333-1342

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360066
  • [Journal Article] Systematization of measurement method of geometric accuracy of five-axis control machining center2004

    • Author(s)
      Hirotatsu Kosugi, Keizo Utsumi, Masaomi TSUTSUMI
    • Journal Title

      Proceedings of JSPE Annual Spring Conference

      Pages: 441-442

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360066
  • [Journal Article] Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements2004

    • Author(s)
      Masaomi TSUTSUMI, Akinori SAITO
    • Journal Title

      International Journal of Machine Tools and Manufacture 44

      Pages: 1333-1342

    • Data Source
      KAKENHI-PROJECT-15360066
  • [Journal Article] General calibration methods of 5-axis controlled machining centers according to the structural configurations2003

    • Author(s)
      S.Sisavath, S.Mikami, A.Saito, M.Tsutsumi
    • Journal Title

      Proceedings of International Conference on Leading Edge Manufacturing in Niigata

      Pages: 607-612

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360066
  • [Journal Article] General calibration methods of 5-axis controlled machining centers according to the structural configurations2003

    • Author(s)
      A.Saito, M.Tsutsumi, et al.
    • Journal Title

      Proc.Inter.Conf.on Leading Edge Manufacturing 1

      Pages: 607-612

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360066
  • [Presentation] 5軸制御マシニングセンタの3次元円弧補間運動軌跡に及ぼす検査条件の影響2011

    • Author(s)
      土橋祐、堤正臣、加藤教之
    • Organizer
      第18回精密工学会学生会員卒業研究発表講演会論文集
    • Place of Presentation
      東京都
    • Year and Date
      2011-03-14
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 円すい台を模擬した3次元円弧補間運動による5軸制御マシニングセンタの性能評価2011

    • Author(s)
      加藤教之、土橋祐、堤正臣、弓座大輔、井原之敏
    • Organizer
      2011年度精密工学会春季大会学術講演会講演論文集
    • Place of Presentation
      東京都
    • Year and Date
      2011-03-15
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 円すい台を模擬した3次元円弧補間運動による5軸制御マシニングセンタの性能評価2011

    • Author(s)
      加藤教之, 土橋祐, 堤正臣, 弓座大輔, 井原之敏
    • Organizer
      2011年度精密工学会春季大会学術講演会講演論文集
    • Place of Presentation
      東京都(東洋大学)(公開日)
    • Year and Date
      2011-03-01
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 5'軸制御マシニングセンタの3次元円弧補間運動軌跡に及ぼす検査条件の影響2011

    • Author(s)
      土橋祐, 堤正臣, 加藤教之
    • Organizer
      第18回精密工学会学生会員卒業研究発表講演会論集
    • Place of Presentation
      東京都(東洋大学)(公開日)
    • Year and Date
      2011-03-01
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 工作物座標系を基準とした測定方法による5軸制御マシニングセンタの幾何偏差の同定2010

    • Author(s)
      登根慎太郎、堤正臣、崔成日
    • Organizer
      生産と加工に関する学術講演会2010
    • Place of Presentation
      岡山県
    • Year and Date
      2010-11-19
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 四角すい台を用いた5軸マシニングセンタの工作精度試験方法の開発2010

    • Author(s)
      木落清志郎、堤正臣、佐伯智之、崔成日
    • Organizer
      2010年度精密工学会秋期大会学術講演会講演論文集
    • Place of Presentation
      愛知県
    • Year and Date
      2010-09-27
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 四角すい台を用いた5軸マシニングセンタの工作精度試験方法の開発2010

    • Author(s)
      木落清志郎, 堤正臣, 佐伯智之, 崔成日
    • Organizer
      2010年度精密工学会秋期大会学術講演会講演論文集
    • Place of Presentation
      愛知県(名古屋大学)
    • Year and Date
      2010-09-27
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 3Dプローブによる回転テーブルの運動精度測定方法の開発2010

    • Author(s)
      田島和也, 堤正臣, 崔成日
    • Organizer
      2010年度精密工学会 第17回卒業研究発表講演会
    • Place of Presentation
      埼玉大学(埼玉県)
    • Year and Date
      2010-03-16
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 3テーブル旋回形5軸マシニングセンタの回転軸中心線推定方法2010

    • Author(s)
      山本通, 堤正臣
    • Organizer
      2010年度精密工学会秋期大会学術講演会講演論文集
    • Place of Presentation
      愛知県(名古屋大学)
    • Year and Date
      2010-09-27
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 四角すい台を用いた5軸マシニングセンタの工作精度試験方法の開発2010

    • Author(s)
      木落誠志郎, 堤正臣, 崔生日, 深山直紀
    • Organizer
      2010年度精密工学会 第17回卒業研究発表講演会
    • Place of Presentation
      埼玉大学(埼玉県)
    • Year and Date
      2010-03-16
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 5軸制御マシニングセンタにおける同時3軸制御運測定装置の互換性2010

    • Author(s)
      崔成日、堤正臣、茨木創一、井原之敏、清水伸二、三島望
    • Organizer
      2010年度精密工学会春季大会学術講演会講演論文集
    • Place of Presentation
      埼玉県
    • Year and Date
      2010-03-16
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 5軸制御マシニングセンタにおける同時3軸制御運測定装置の互換性2010

    • Author(s)
      崔成日, 堤正臣, 茨木創一, 井原之敏, 清水伸二, 三島望
    • Organizer
      2010年度精密工学会春期学術講演会
    • Place of Presentation
      埼玉大学(埼玉県)
    • Year and Date
      2010-03-17
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 傾斜した旋回主軸頭をもつ5軸制御マシニングセンタの幾何偏差測定方法2010

    • Author(s)
      深山直紀, 崔成日, 堤正臣, 佐伯智之
    • Organizer
      2010年度精密工学会春期学術講演会
    • Place of Presentation
      埼玉大学(埼玉県)
    • Year and Date
      2010-03-17
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] Development of 3D-probe for measuring rotational accuracy of tilting rotary tables2010

    • Author(s)
      K.Tajima, D.Muditha, C.Cui, M.Tsutsumi
    • Organizer
      Proceedings of 4th CIRP International Conference on High Performance Cutting
    • Place of Presentation
      Gifu
    • Year and Date
      2010-10-25
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 傾斜した旋回主軸頭をもつ5軸制御マシニングセンタの幾何偏差測定方法2010

    • Author(s)
      深山直記、崔成日、堤正臣、佐伯智之
    • Organizer
      2010年度精密工学会春季大会学術講演会講演論文集(1027-1028)
    • Place of Presentation
      埼玉県
    • Year and Date
      2010-03-16
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 5軸マシニングセンタにおける3次元円弧補間運動の誤差曲線及ぼす検査条件の影響2010

    • Author(s)
      堤正臣、土橋祐、加藤教之、崔成日
    • Organizer
      生産と加工に関する学術講演会2010
    • Place of Presentation
      岡山県
    • Year and Date
      2010-11-19
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] Generalization of Identification Method of Geometric Deviations for Fiveaxis Machining Centers with a Tilting-rotary Table2009

    • Author(s)
      N.Miyama, T.Saiki, C.Cui, M.Tsutsumiaoki
    • Organizer
      The 5^<th> International Conference on Leading Edge Manufacturing in 21^<st> Century
    • Place of Presentation
      大阪大学コンベンションセンター(大阪府)
    • Year and Date
      2009-12-02
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] A method for estimating the inherent deviations of multi-tasking turning center2009

    • Author(s)
      M.Dassanayake, C.CUI, K.HIGASHIYAMA, M.TSUTSUMI
    • Organizer
      The 5th International Conference on Leading Edge Manufacturing in 21st Century
    • Place of Presentation
      Osaka
    • Year and Date
      2009-12-03
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] Identification Methods of Geometric Deviations Suitable to Multi Tasking Turning Centers2009

    • Author(s)
      C.Cui, M.Tsutsumi, K.Higashiyama
    • Organizer
      The 5^<th> International Conference on Leading Edge Manufacturing in 21^<st> Century
    • Place of Presentation
      大阪大学コンベンションセンター(大阪府)
    • Year and Date
      2009-12-02
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] Identification Methods of Geometric Deviations Suitable to Multi Tasking Turning Centers2009

    • Author(s)
      C.CUI, M.TSUTSUMI, K.HIGASHIYSMA
    • Organizer
      The 5th International Conference on Leading Edge Manufacturing in 21st Century
    • Place of Presentation
      Osaka
    • Year and Date
      2009-12-03
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] Generalization of Identification Method of Geometric Deviations for Five-axis Machining Centers with a Tilting-rotary Table2009

    • Author(s)
      N.MIYAMA, T. SAIKI, C.CUI, M.TSUTSUMI
    • Organizer
      The 5th International Conference on Leading Edge Manufacturing in 21st Century
    • Place of Presentation
      Osaka
    • Year and Date
      2009-12-03
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] A method for Estimating the Inherent Deviations of Multi-tasking Turning Center2009

    • Author(s)
      M.Dassanayake, C.Cui, K.Higashiyama, M.Tsutsumi
    • Organizer
      The 5^<th> International Conference on Leading Edge Manufacturing in 21^<st> Century
    • Place of Presentation
      大阪大学コンベンションセンター(大阪府)
    • Year and Date
      2009-12-04
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] Development of Groove-Matrix Machining Method for Evaluating 5-Axis Machining Centers2009

    • Author(s)
      T.Yamamoto, T.Hasebe, M.Tsutsumi
    • Organizer
      The 5^<th> International Conference on Leading Edge Manufacturing in 21^<st> Century
    • Place of Presentation
      大阪大学コンベンションセンター(大阪府)
    • Year and Date
      2009-12-02
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 傾斜した旋回軸をもつテーブル旋回形5軸制御マシニングセンタの幾何偏差測定方法2008

    • Author(s)
      深山直記、佐伯智之、崔成日、堤正臣
    • Organizer
      生産と加工に関する学術講演会2008
    • Place of Presentation
      岐阜県
    • Year and Date
      2008-11-21
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 5軸制御マシニングセンタ回転テーブルの数学モデルの開発2008

    • Author(s)
      中村聡、高橋耕太郎、M.Dassanayake、堤正臣
    • Organizer
      生産と加工に関する学術講演会2008
    • Place of Presentation
      岐阜県
    • Year and Date
      2008-11-21
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 5軸制御マシニングセンタの運動精度試験方法標準化-提案したI S O規格原案-2008

    • Author(s)
      堤正臣
    • Organizer
      第7回生産加工・工学機械部門講演会 生産と加工に関する学術講演会2008
    • Place of Presentation
      岐阜市・長良川国際会議場
    • Year and Date
      2008-11-21
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 旋盤形複合加工機に存在する幾何偏差同定方法2008

    • Author(s)
      崔成日、東山憲司、M.Dassanayake、堤正臣
    • Organizer
      生産と加工に関する学術講演会2008
    • Place of Presentation
      岐阜県
    • Year and Date
      2008-11-21
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 5軸制御工作機械の3次元円弧補間軌跡に及ぼすNCデータの影響2008

    • Author(s)
      鈴木宏祐、堤正臣、佐伯智之
    • Organizer
      生産と加工に関する学術講演会2008
    • Place of Presentation
      岐阜県
    • Year and Date
      2008-11-21
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 傾斜した旋回軸をもつテーブル旋回形5軸制御マシニングセンタの幾何偏差測定方法2008

    • Author(s)
      堤 正臣
    • Organizer
      第7回生産加工・工学機械部門講演会 生産と加工に関する学術講演会2008
    • Place of Presentation
      岐阜市・長良川国際会議場
    • Year and Date
      2008-11-21
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 旋盤形複合加工機の運動精度評価方法の開発2008

    • Author(s)
      東山憲司、山川泰祐、崔成日、堤正臣
    • Organizer
      生産と加工に関する学術講演会2008
    • Place of Presentation
      岐阜県
    • Year and Date
      2008-11-21
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 5軸制御マシニングセンタ運動精度測定方法の開発-3次元円弧補間運動に及ぼす測定条件の影響-2008

    • Author(s)
      堤 正臣
    • Organizer
      2008年度精密工学会秋季大会学術講演会
    • Place of Presentation
      仙台市・東北大学
    • Year and Date
      2008-09-19
    • Data Source
      KAKENHI-PROJECT-20360063
  • [Presentation] 多軸制御工作機械の精度試験方法標準化の動向2008

    • Author(s)
      堤 正臣
    • Organizer
      2008年度精密工学会秋季大会学術講演会
    • Place of Presentation
      仙台市・東北大学
    • Year and Date
      2008-09-19
    • Data Source
      KAKENHI-PROJECT-20360063
  • 1.  SASAHARA Hiroyuki (00205882)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 16 results
  • 2.  SAITO Akinori (10334476)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 17 results
  • 3.  RYUTA Sato (60376861)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 4.  OISHI Susumu (70094258)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 5.  NAGAI Masao (10111634)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 6.  MORIWAKI Toshimichi (00031104)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 7.  TANI Yasuhiro (80143527)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 8.  FURUKAWA Yuji (10087190)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 9.  TOHYAMA Shigeki (20143381)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 10.  HIGUCHI Toshiro (10111569)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 11.  UMEDA Norihiro (60111803)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 12.  MORONUKI Nobuyuki (90166463)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 13.  ITOH Shuzo (80176338)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 14.  ITO Yoshimi (60016441)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 15.  NISIWAKI Nobuhiko (90016626)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 16.  飯島 昇 (30015036)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 17.  趙 暁明 (10293010)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 18.  KIUCHI Satoshi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 19.  YAMADA Toshio
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi