• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

ONIKURA Hiromichi  鬼鞍 宏猷

ORCIDConnect your ORCID iD *help
… Alternative Names

ONIKURA Hiromiti  鬼鞍 宏みち

Less
Researcher Number 90108655
Other IDs
External Links
Affiliation (based on the past Project Information) *help 2008 – 2009: 九州大学, 大学院・工学研究院, 教授
2001 – 2003: 九州大学, 大学院・工学研究科, 教授
2000 – 2001: KYUSHU UNIVERSITY, Faculty of Engineering, Prof., 大学院・工学研究院, 教授
1999: 九州大学, 大学院・工学研究科, 教授
1993 – 1998: 九州大学, 工学部, 教授
Review Section/Research Field
Principal Investigator
機械工作・生産工学
Except Principal Investigator
Intelligent mechanics/Mechanical systems / 機械工作・生産工学 / 設計工学・機械要素・トライボロジー / Materials/Mechanics of materials / Production engineering/Processing studies
Keywords
Principal Investigator
表面粗さ / レーザダイオード / 光学式三角測量法 / 散乱光 / 内径測定器 / PSD / 反射光の強度分布 / 三角測量法 / Leaser diode / Optical trigonometry … More / Optical dispersion / Inner diameter measuring instrument / Photo sensitive detector / Surface roughness / Intensity distribution of reflective beam / 超音波振動切削 / 小径穴加工 / 食付き / 鎚打ち作用 / ふれまわり振動 / 傾斜穴加工 / 位置度 / 曲がり / 小経穴加工 / 超音波振動加工 / 切りくず排出性 / ドリル食いつき性 / 折損 / 寿命 / Ultrasonic vibrationassisted cutting / Micro drilling / Start of drilling / Hammering motion / Wandering motion / Drilling to inclined surface / Hole displacement / Axial hole deviation / 仕上げ施削 / 超耐熱合金 / 超音波振動 / 工具摩耗 / 冷却剤 / インコネル718 / 液体窒素 / 仕上げ旋削 / 工具磨耗 / 超耐熱合金インコネル718 / 凝着 / 切削温度の低下 / 工具破損 / 工具台の剛性 / 振動方向 / Finish Turning / Super Heat-Resistant Alloy / Ultrasonic Vibration / Tool Wear / Surface Roughness / Coolant / Inconel 718 / Liquid Nitrogen … More
Except Principal Investigator
誘導 / レーザ / 深穴 / 切削 / CBN / ホブ切り / 歯車 / Cutting / Hobbing / Gear / Guiding / Laser / 原子間力顕微鏡 / 分子動力学 / マイクロマシン / マイクロ強度試験 / 単結晶 / 不連続体力学 / 超音波振動研削 / CBN工具 / 目づまり / 研削低抗 / 低切込み / 低剛性砥石 / 法線分力 / 高回転数 / 形状測定 / ファジィ / インチウォーム / CMP / 密閉型加工 / 密閉雰囲気 / 光触媒反応 / Si / SiC / 加工レート / ベルジャー密閉型 / 高圧ガス雰囲気と減圧雰囲気 / 光触媒反応の援用 / 両面同時加工 / 多枚数同時加工 / 難加工材料 / 雰囲気制御加工 / 電解CMP / 高圧酸素雰囲気 / サ-メット / 高精度歯車 / 負荷能力 / 歯面粗さ / サーメット / Cermet / Accurate Gear / Load-Carrying Capacity / Tooth Surface Roughness / 深穴加工工具 / 知能 / 表面粗さ / 工具摩耗 / 切削音 / ニューラルネットワーク / Deep hole boring tool / Intelligent / Surface roughness / Tool wear / Sound / Artificial neural network / 高速度カメラ / 切削過渡現象 / 切りくず生成機構 / 切りくず / 高速度ビデオカメラ / 画像処理 / High speed camera / Transient phenomenon of cutting / Mechanism of chip formation / 加工 / ロボット / 適応制御 / Deep hole / Machining / Robot / Adaptive control / マイクロ研削 / ニッケル / リンめっき / マイクロツルーイング / マイクロドレッシング / 超精密微細型 / ダイヤモンド砥粒 / 研削工具 / 電鋳工具 / 高速電鋳 / アモルファスめっき / ダイヤモンド工具 / マイクロ金型 / マイクロ研削工具 / ツルーイング / ドレッシング / cBN砥粒 / 研削加工 / Microgrinding / Nickel / Phosphorous plating / Micro-Truing / Micro-Dressing / Micro dies and molds / Grinding tool / Diamond tool / Electroforming Less
  • Research Projects

    (12 results)
  • Co-Researchers

    (20 People)
  •  Development of a new Chemical Mechanical Polishing (CMP) machine, assisted by the photocatalytic reactions and electrolytic actions in the atmosphere controlled sealed CMP chamber

    • Principal Investigator
      DOI Toshiro
    • Project Period (FY)
      2008 – 2010
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Kyushu University
  •  Development of mechanical micro-fabrication system using pencil-shape electroformed tool

    • Principal Investigator
      FUJIYAMA Hirokazu
    • Project Period (FY)
      2001 – 2003
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Fukuoka Institute of Technology
  •  超音波振動付加による超耐熱合金の被削性向上と切削機構解明Principal Investigator

    • Principal Investigator
      ONIKURA Hiromichi
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      KYUSHU UNIVERSITY
  •  Development of a Practical Laser-Guided Deep-Hole Boring Robot

    • Principal Investigator
      KATSUKI Akio
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Intelligent mechanics/Mechanical systems
    • Research Institution
      Kyushu University
  •  レーザ誘導方式深穴評価プローブの開発

    • Principal Investigator
      甲木 昭雄
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Intelligent mechanics/Mechanical systems
    • Research Institution
      Kyushu University
  •  Transient Phenomenon of Chip Generations and movements in hobbing

    • Principal Investigator
      ARIURA Yasutsune
    • Project Period (FY)
      1998 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (B).
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYUSHU UNIVERSITY
  •  マイクロマシン用強度設計指針の構築

    • Principal Investigator
      野口 博司
    • Project Period (FY)
      1997
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Kyushu University
  •  超音波振動研削によるCBN焼結多刃工具の成形に関する基礎研究

    • Principal Investigator
      ARIURA Yasutune
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      機械工作・生産工学
    • Research Institution
      Kyushu University
  •  Development of an in-process inner diameter and roundness measuring instrumentPrincipal Investigator

    • Principal Investigator
      ONIKURA Hiromichi
    • Project Period (FY)
      1996 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      KYUSHU UNIVERSITY
  •  Solution of dynamic cutting mechanism of ultrasonic viration assisted micro drillingPrincipal Investigator

    • Principal Investigator
      ONIKURA Hiromichi
    • Project Period (FY)
      1996 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      KYUSHU UNIVERSITY
  •  Development of an intelligent deep-hole boring tool

    • Principal Investigator
      KATSUKI Akio
    • Project Period (FY)
      1994 – 1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      Intelligent mechanics/Mechanical systems
    • Research Institution
      KYUSHU UNIVERSITY
  •  High Efficiency Finish Hobbing of High Accurate Gears with cermet or CBN Hobs

    • Principal Investigator
      ARIURA Yasutune
    • Project Period (FY)
      1993 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYUSHU UNIVERSITY
  • 1.  KATSUKI Akio (20038095)
    # of Collaborated Projects: 7 results
    # of Collaborated Products: 0 results
  • 2.  SAJIMA Takao (20215750)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 0 results
  • 3.  UMEZAKI Yoji (70038066)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 4.  ARIURA Yasutune (10038044)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 5.  MOHRI Akira (50037909)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 6.  KUROKAWA Syuhei (90243899)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 7.  ISHIMARU Ryohei (10264061)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 8.  NAKANISHI Tsutomu (40038055)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 9.  DOI Toshiro (30207675)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 10.  OHNISHI Osamu (50315107)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 11.  FUJIYAMA Hirokazu (50148912)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 12.  SEMBA Takuya (30154678)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 13.  TANAKA Shuji (30236591)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 14.  野口 博司 (80164680)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 15.  青野 雄太 (70264075)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 16.  尾田 安司 (20091340)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 17.  深田 悟 (40110837)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 18.  OKABE Kenji
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 19.  NAKAMURA Taizo
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 20.  吉田 裕一
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to connect your ORCID iD to this researcher?
* This action can be performed only by the researcher themselves.

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi