YAKUSHIJI Terutoshi 薬師寺輝敏

… Alternative Names

薬師寺輝敏ヤクシジテルトシ

Less

Researcher Number	90210228
Other IDs
Affiliation (Current)	2025: 大分工業高等専門学校, 機械工学科, 教授
Affiliation (based on the past Project Information) *help	2018 – 2021: 大分工業高等専門学校, 機械工学科, 教授 2016: 大分工業高等専門学校, その他部局等, 教授 2010 – 2016: 大分工業高等専門学校, 機械工学科, 教授 2003 – 2008: 大分工業高等専門学校, 機械工学科, 教授
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials Except Principal Investigator Measurement engineering / Basic Section 18010:Mechanics of materials and materials-related
Keywords	Principal Investigator 疲労強度 / 摩擦加工 / ナノ結晶粒 / 強歪加工 / 表面加工 / 回転曲げ疲労 / ナノ結晶 / V溝切欠き / 応力集中 / 残留応力 … More / 強ひずみ加工 / 回転曲げ疲労強度 / 微細結晶粒 / き裂伝ぱ / 表面改質 … More Except Principal Investigator 非破壊検査 / SUS304 / 磁気センサ / 疲労 / 平面曲げ疲労 / Fatigue Damage / Bending Stress / Martensite / Austenite / Excitation Type Magnetic Sensor / Non-destructive Evaluation / 透磁率 / オーステナイト / SUS316 / 鉄系構造材 / 渦電流法 / マルテンサイト変態 / 渦電流 / き裂 / 析出強化銅合金 / 微細化 / 強変形加工 / 組織 / 不連続析出 / 銅合金 / 回転磁界 / 交番磁界 / Eddy Current / 磁性 / 材料劣化 / 垂直残留磁化 / 励磁コイル / 疲労被害 / マルテンサイト / 励磁型磁気センサ / 直流磁界 / 疲労破壊 / 非破壞検査 / 疲労蓄積量評価 / 抵抗率 / インダクタンス / ステンレス鋼 / 予防保全 Less

Creation of anti-fatigue copper alloy strengthened by nanofiber-shaped discontinuous precipitate with superior conductivity and high strength
- Principal Investigator
  
  Goto Masahiro
- Project Period (FY)
  2018 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Oita University
Creation of nano-crystal-grains layer and Residual stress by the cutting and rubbing process in a notch of specimenPrincipal Investigator
- Principal Investigator
  
  Terutoshi Yakushiji
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Oita National College of Technology
Development of the nondestructive fatigue monitoring system using the combined-type magnetic sensor to achieve highly accurate residual life assessment
- Principal Investigator
  
  OKA Mohachiro
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Measurement engineering
- Research Institution
  Oita National College of Technology
Development of the New Nondestructive Material Degradation Evaluation Method Using the Low Frequency Excitation Magnetic Sensor Under the DC Magnetic Field
- Principal Investigator
  
  OKA Mohachiro
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Measurement engineering
- Research Institution
  Oita National College of Technology
Suggestion of a cutting friction working process to form the Nano crystal grained structure and characteristic evaluation.Principal Investigator
- Principal Investigator
  
  YAKUSHIJI Terutoshi
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Oita National College of Technology
Development of the monitoring method of fatigue accumulation using the magnetic sensor to achieve preventive maintenance for ferrous structural materials
- Principal Investigator
  
  OKA Mohachiro
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Measurement engineering
- Research Institution
  Oita National College of Technology
Development of Fatigue Evaluation System for Structural Metallic Material Using the Eddy Current Type High Sensitivity Magnetic Sensor
- Principal Investigator
  
  OKA Mohachiro
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Measurement engineering
- Research Institution
  Oita National College of Technology
Development of Nondestructive Evaluation System Using the Excitation Type High Sensitivity Magnetic Sensor to Ddetect Fatigue Damage of Metallic Material
- Principal Investigator
  
  OKA Mohachiro
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Measurement engineering
- Research Institution
  Oita National College of Technology

[Journal Article] Formation process of fatigue slip bands with unique configurations of ultrafine-grained high-purity Cu fabricated by severe plastic deformation2022
- Author(s)
  Masahiro Goto, Terutoshi Yakushiji, Sangshik Kim, Takaei Yamamoto, Seung Zeon Han
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 899 Pages: 163263-163263
- DOI
  10.1016/j.jallcom.2021.163263
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Journal Article] Stress-dependent opening- and shear-mode propagation behavior of fatigue cracks in ultrafine-grained Cu fabricated by equal channel angular pressing2021
- Author(s)
  Goto M.、Yamamoto T.、Han S.Z.、Kim S.、Kitamura J.、Yakushiji T.、Ahn J-H.、Takanami R.、Utsunomiya T.、Lee J.
- Journal Title
  
  International Journal of Fatigue
  
  Volume: 142 Pages: 105978-105978
- DOI
  10.1016/j.ijfatigue.2020.105978
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Journal Article] Microstructure and fatigue properties of Cu-Si alloy strengthened by Ni2Si intermetallic compounds2021
- Author(s)
  Masahiro Goto, Takahito Utsunomiya, Takaei Yamamoto, Seung Zeon Han, Junichi Kitamura, Jee-Hyuk Ahn, Sung Hwan Lim, Terutoshi Yakushiji
- Journal Title
  
  WIT Transactions on Engineering Sciences
  
  Volume: 130 Pages: 75-86
- DOI
  10.2495/cmem210071
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Journal Article] Crack initiation mechanism in ultrafine-grained copper fabricated by severe plastic deformation in the high-cycle fatigue regime2020
- Author(s)
  Goto M.、Yamamoto T.、Han S.Z.、Lim S.H.、Kim S.、Ahn J.-H.、Lee S.J.、Yakushiji T.、Lee J.
- Journal Title
  
  Materials Science and Engineering: A
  
  Volume: 788 Pages: 139569-139569
- DOI
  10.1016/j.msea.2020.139569
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Journal Article] Fatigue behavior of Cu-6Ni-1.5Si alloy with discontinuous precipitates and the effect of difference in rolling before solution heat treatment2020
- Author(s)
  Goto M.、Yamamoto T.、Han S. Z.、Kitamura J.、Utsunomiya T.、Ahn J-H.、Yakushiji T.、Lee J.
- Journal Title
  
  American Institute of Physics Conference Proceedings
  
  Volume: 2309 Pages: 020022-020022
- DOI
  10.1063/5.0034053
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Journal Article] Role of compressive residual stresses produced by cutting and rubbing processing on fatigue strength of heat-treated SCM435 smooth specimens2019
- Author(s)
  薬師寺輝敏，徳澄翼，後藤真宏
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 85 Issue: 876 Pages: 19-00131-19-00131
- DOI
  10.1299/transjsme.19-00131
- NAID
  130007695492
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01340
[Journal Article] Growth rate of small surface-cracks in age hardening Cu-Ni-Si alloy under cyclic stressing2019
- Author(s)
  Masahiro Goto, Takaei Yamamoto, Junichi Kitamura, Seung Zeon Han, Ryotarou Takanami, Terutoshi Yakushiji and Jehyun Lee
- Journal Title
  
  Key Engineering Materials
  
  Volume: 827 Pages: 216-221
- DOI
  10.4028/www.scientific.net/kem.827.216
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Journal Article] Behavior of small fatigue-cracks inCu-5.5Ni-1.28Si allow round-bar specimens2019
- Author(s)
  Masahiro Goto, Takaei Yamamoto, Seung Zeon Han, Jee-Hyuk Ahn, Junichi Kitamura, Ryotarou Takanami, Terutoshi Yakushiji, Jehyun Lee
- Journal Title
  
  Transactions on Engineering Sciences - WIT
  
  Volume: 125 Pages: 3-13
- DOI
  10.2495/cmem190011
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Journal Article] Microstructure-dependent fatigue behavior of aged Cu-6Ni-1.5Si alloy with discontinuous/cellular precipitates2019
- Author(s)
  Masahiro Goto, Takaei Yamamoto, Seung-zeon Han, Sung-hwan Lim, Sangshik Kim, Takashi Iwamura, Junichi Kitamura, Jee-hyuk Ahn, Terutoshi Yakushiji, Jehyun Lee
- Journal Title
  
  Materials Science & Engineering-A
  
  Volume: 747 Pages: 63-72
- DOI
  10.1016/j.msea.2019.01.057
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340, KAKENHI-PROJECT-18H00244
[Journal Article] Behavior of fatigue cracks generated from a small artificial-defect in plain specimen of copper processed by equal channel angular pressing2018
- Author(s)
  Masahiro Goto, Takashi Iwamura, Takaei Yamamoto, Seung-zeon Han, Junichi Kitamura, Terutoshi Yakushiji
- Journal Title
  
  Journal of Materials Science Forum
  
  Volume: 941 Pages: 614-619
- DOI
  10.4028/www.scientific.net/msf.941.614
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340, KAKENHI-PROJECT-18H00244
[Journal Article] Relationship between shear plane of the final pressing and fatigue crack growth behaviour of round-bar specimens of CU processed by ECAP2018
- Author(s)
  Masahiro Goto, Takaei Yamamoto, Seung-zeon Han, Jee-Hyuk Ahn, Junichi Kitamura, Kusuno Kamil, Terutoshi Yakushiji, Toshiki Masuda, Takashi Iwamura, Sangshik Kim
- Journal Title
  
  International Journal of Computational Methods and Experimental Measurements
  
  Volume: 6 Issue: 4 Pages: 691-702
- DOI
  10.2495/cmem-v6-n4-691-702
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Journal Article] The Evaluation of Fatigue Caused by Plane-Bending Stress on Stainless Steel Using the Stacked-Coil Type Magnetic Sensor2017
- Author(s)
  Mohachiro Oka, Terutoshi Yakushiji, and Masato Enokizono
- Journal Title
  
  43rd Annual Review of Progress in Quantitative Nondestructive Evaluation
  
  Volume: Volume 36 Pages: 110009-110009
- DOI
  10.1063/1.4974687
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26420035
[Journal Article] The Evaluation of Fatigue Caused by Plane-Bending Stress on Stainless Steel Using the Stacked-Coil Type Magnetic Sensor2017
- Author(s)
  M. Oka, T. Yakushiji, and M. Enokizono
- Journal Title
  
  AIP Conference Proceedings 1806 (Review of Progress in Quantitative Nondestructive Evaluation)
  
  Volume: 1806 Pages: 110009-110009
- Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26420406
[Journal Article] Bending fatigue strength of annealed 0.45% carbon steel specimens finished by cutting and rubbing technique utilizing cemented carbide tip2016
- Author(s)
  T. Yakushiji, F. Nakagawa and M. Goto
- Journal Title
  
  International Journal of Fracture Fatigue &　Wear
  
  Volume: Vol.4 Pages: 146-152
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26420035
[Journal Article] Relationship between grain growth and formation of fracture surface of ultrafine grained Cu in high-cycle fatigue2016
- Author(s)
  M. Goto, S.Z.Han, T. Yamamoto, J. Kitamura, K. Kamil, T. Fujimura and T. Yakushiji
- Journal Title
  
  Key Engineering Materials
  
  Volume: Vol.713 Pages: 147-150
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420035
[Journal Article] BENDING FATIGUE STRENGTH OF ANNEALED 0.45% CARBON STEEL SPECIMENS FINISHED BY CUTTING AND RUBBING TECHINQUE UTILIZING CEMENTED CARBIDE TIP2016
- Author(s)
  T. Yakushiji, F. Nakagawa and M. Goto
- Journal Title
  
  International Journal of Fracture Fatigue and Wear
  
  Volume: ＊＊
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26420035
[Journal Article] Formation mechanism of inclined fatigue-cracks in ultrafine-grained Cu processed by equal channel angular pressing2016
- Author(s)
  M. Goto, S.Z. Han, T. Yamamoto, J. Kitamura, J.H. Ahn , T. Yakushiji, S.S. Kim, J. Lee
- Journal Title
  
  International Journal of Fatigue
  
  Volume: Vol.92 Pages: 577-587
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420035
[Journal Article] Evaluation of Fatigue Damage Induced by Pulsating Tension Stress and Plane Bending Stress Using the Remnant Magnetization Method2016
- Author(s)
  M. Oka, Yuki Sato, T. Yakushiji, and M. Enokizono
- Journal Title
  
  International Journal of Applied Electromagnetics and Mechanics
  
  Volume: 52 Pages: 1169-1176
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26420406
[Journal Article] High-Cycle Fatigue Damage of Oxygen-Free and Deoxidized-Phosphorous Copper Processed by Equal Channel Angular Pressing of microstructural evolution2015
- Author(s)
  M.Goto，N.Teshima,S.Z. Han, J.H. Ahn, T.Yakushiji
- Journal Title
  
  Key Engineering Materials
  
  Volume: Vol. 627
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26420035
[Journal Article] 磁気的手法による鉄系構造材の非破壊片振り引張疲労評価2015
- Author(s)
  岡茂八郎, 薬師寺輝敏, 榎園正人
- Journal Title
  
  日本AEM学会誌
  
  Volume: 23 Pages: 654-658
- NAID
  130005123762
- Data Source
  KAKENHI-PROJECT-26420406
[Journal Article] S–N plots and related phenomena of ultrafine grained copper with different stages of microstructural evolutio2015
- Author(s)
  M.Goto，S.Z. Han, J.Kitamura， T.Yakushiji , J.H. Ahn , S.S. Kim , M. Baba,T.Yamamoto， J. Lee，
- Journal Title
  
  International Journal of Fatigue
  
  Volume: Vol.73 Pages: 98-108
- Open Access
- Data Source
  KAKENHI-PROJECT-26420035
[Journal Article] Evaluation of the Material Degradation of Austenitic Stainless Steel under Pulsating Tension Stress Using Magnetic Methods2015
- Author(s)
  M. Oka, T. Yakushiji, and M. Enokizono
- Journal Title
  
  Journal of the Japan Society of Applied Electromagnetics and Mechanics
  
  Volume: ２３ Pages: 458-463
- NAID
  130005113285
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26420406
[Journal Article] S-N　plots and related phenomena of ultrafine grained copper with different stages of microstructural evolution2015
- Author(s)
  M. Goto, S.Z. Han, J. Kitamura , T. Yakushiji , J.H. Ahn , S.S. Kim , M. Baba, T. Yamamoto, J. Lee
- Journal Title
  
  International Journal of Fatigue
  
  Volume: 73 Pages: 98-108
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26420035
[Journal Article] ワイヤ放電加工したS45C材の疲労強度2015
- Author(s)
  薬師寺輝敏，後藤真宏，鳥居幸代
- Journal Title
  
  材料
  
  Volume: 第64巻 Pages: 940-945
- NAID
  130005109744
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26420035
[Journal Article] Cutting and rubbing process for a Ti-6Al-4V alloys, and its effects2014
- Author(s)
  薬師寺輝敏，渡部杏伍，後藤真宏，戸高義一
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 80 Issue: 818 Pages: SMM0296-SMM0296
- DOI
  10.1299/transjsme.2014smm0296
- NAID
  130004701525
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26420021, KAKENHI-PROJECT-26420035
[Journal Article] Examination of the Inductance Method for Non-Destructive Testing in Structural Metallic Material by Means of the Pancake-type Coil2013
- Author(s)
  M. Oka, T. Yakushiji, Y. Tsuchida, and M. Enokizono
- Journal Title
  
  Journal of the Japan Society of Applied Electromagnetics and Mechanics
  
  Volume: Vol. 21, No. 3 Pages: 488-493
- NAID
  10031192123
- Data Source
  KAKENHI-PROJECT-23560518
[Journal Article] 摩擦加工を受けたS45Cの回転曲げ疲労特性の解明2012
- Author(s)
  薬師寺輝敏,鈴木健太郎,清水利弘,戸高義一,神志那薫,中村裕紀,中島正貴
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 56巻2号 Pages: 112-117
- NAID
  10030194698
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560099
[Journal Article] Fatigue Evaluation of Low Carbon Steel by Means of the Inductance Method Using a Pancake-Type Coil2012
- Author(s)
  M. Oka , Y. Tsuchida, T. Yakushiji, M. Enokizono
- Journal Title
  
  Journal of the Japan Society of Applied Electromagnetics and Mechanics
  
  Volume: Vol. 20, No. 2 Pages: 514-519
- NAID
  110009544613
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560099
[Journal Article] Fatigue Evaluation of Low Carbon Steel by Means of the Inductance Method Using a Pancake-Type Coil2012
- Author(s)
  M. Oka ， T. Yakushiji
- Journal Title
  
  Journal of the Japan Society of Applied Electromagnetics and Mechanics
  
  Volume: Vol. 20, Pages: 514-519
- NAID
  110009544613
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560099
[Journal Article] Fatigue Evaluation of Low Carbon Steel by Means of the Inductance Method Using a Pancake-Type Coil2012
- Author(s)
  M. Oka, T. Yakushiji, Y. Tsuchida, and M. Enokizono
- Journal Title
  
  Journal of the Japan Society of Applied Electromagnetics and Mechanics
  
  Volume: Vol. 20, No. 2 Pages: 514-519
- NAID
  110009544613
- Data Source
  KAKENHI-PROJECT-23560518
[Journal Article] Effect of Pre-stressing on the Growth Direction of Surface Cracks in Ultrafine Grained Copper2012
- Author(s)
  K. Kamil, M. Goto, S. Z. Han, K. Euh, T. Yakushiji and Y Tatsukawal
- Journal Title
  
  Proceedings of 4th international conference on crack path
  
  Volume: CP2012 Pages: 123-134
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560099
[Journal Article] High-cycle fatigue characteristics of squeezed cast aluminum alloy smooth specimens cut from car wheels2012
- Author(s)
  M. Goto, T. Yakushiji
- Journal Title
  
  Transaction of The Built Environment (WIT)
  
  Volume: Vol. 124 Pages: 95-106
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560099
[Journal Article] 摩擦加工を受けたS45Cの回転曲げ疲労特性の解明2011
- Author(s)
  鈴木健太郎, 清水利弘, 戸高義一, 神志那薫, 薬師寺輝敏, 中村裕紀, 中島正貴
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 56巻 Pages: 112-117
- NAID
  10030194698
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560099
[Journal Article] Change in surface states of ultrafine grained copper due to cyclic stresses2011
- Author(s)
  M. Goto, K. Kamil, S. Z. Han, K. Euh, T. Yakushiji& N. Kawagoishi
- Journal Title
  
  WTT Transactions on Engineering Sciences, AMA
  
  Volume: Vol. 71 Pages: 135-146
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560099
[Journal Article] Change in surface states of ultrafine grained copper due to cyclic stresses2011
- Author(s)
  M.Goto, K.Kamil, S.Z.Han, K.Euh, T.Yakushiji, N.Kawagoishi
- Journal Title
  
  WTT Transactions on Engineering Sciences
  
  Volume: Vol.71 Pages: 135-146
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560099
[Journal Article] Fatiguedamage formation process of ultrafine grained oxgen-free and deoxidized low-phosphorous copper2010
- Author(s)
  N. Teshima, T. Yakushiji, M. Goto, Y. Ando. Kamil, S. Z. Han, N. Kawagoishi
- Journal Title
  
  International Jouranal of Modern Physics B
  
  Volume: Vol. 24 Pages: 2506-2511
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560099
[Journal Article] 超微細粒銅平滑材のき裂進展挙動と疲労破面2010
- Author(s)
  後藤真宏,安藤吉則,韓承博,手島規博,薬師寺輝敏,金祥植
- Journal Title
  
  機械学会論文集
  
  Volume: 76-765 Pages: 70-76
- NAID
  110007619420
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560099
[Journal Article] NON-DESTRUCTIVE EVALUATION OF FATIGUE DAMAGE FOR SUS316 BY USING ELECTROMAGNETIC METHODS2009
- Author(s)
  M. Oka, Y. Tsuchida, T. Yakushiji, and M.Enokizono
- Journal Title
  
  Review of Progress in Quantitative Nondestructive Evaluation, American Institute of Physics, CP1096 Vol. 28B
  
  Pages: 1442-1449
- Data Source
  KAKENHI-PROJECT-19560434
[Journal Article] Estimation of Fatigue Damage for an Austenitic Stainless Steel (SUS304) Using a Pancake Type Coil2008
- Author(s)
  M. Oka, T. Yakushiji, S. Nagato, Y. Tsuchida and M. Enokizono
- Journal Title
  
  Review of Progress in Quantitative Nondestructive Evaluation, American Institute of Physics, CP975 Vol. 27
  
  Pages: 1244-125
- Data Source
  KAKENHI-PROJECT-19560434
[Journal Article] 磁気センサによるSUS304系鋼・SUS316系鋼の歪みおよび曲げ疲労評価2008
- Author(s)
  槌田雄二, 榎園正人, 岡茂八郎, 薬師寺輝敏
- Journal Title
  
  非破壊検査 Vol. 57, No. 9
  
  Pages: 433-436
- NAID
  10024276773
- Data Source
  KAKENHI-PROJECT-19560434
[Journal Article] Evaluation of Fatigue Damage in an Austenitic Stainless Steel Using Magnetic Sensors2007
- Author(s)
  M.Oka, K.Ono, S.Nagato, T.Yakushiji, T.Tsuchida, M.Enokizono
- Journal Title
  
  Proceedings of Oita University-Seoul National University Joint Symposium on the Applied Electromagnetics
  
  Pages: 37-38
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560384
[Journal Article] Non-destructive Evaluation of Fatigue Damage in the Stainless Steel by Using Electromagnetic Method2007
- Author(s)
  M. Oka, K. Ono, T. Yakushiji, Y. Tsuchida and M. Enokizono
- Journal Title
  
  Short Papers Proceedings of 13th International Symposium on Applied Electromagnetics and Mechanics
  
  Pages: 149-150
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560434
[Journal Article] Estimation of Fatigue Damage for an Austenitic Stainless Steel (SUS304) Using Magnetic Methods2007
- Author(s)
  M.Oka, T.Yakushiji, Y.Tsuchida, M.Enokizono
- Journal Title
  
  Review of Progress in Quantitative Nondestructive Evaluation, American Institute of Physics CP894, Vol.26B
  
  Pages: 1290-1297
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560384
[Journal Article] Evaluation of the Amount of Plane Bending Fatigue Damage in SUS304 by the Excitation type Magnetic Sensor2007
- Author(s)
  M.Oka, H.Shimada, T.Yakushiji, T.Tsuchida, M.Enokizono
- Journal Title
  
  The 10^<th> Symposium on Nondestructive Surface Testing, Surface Sensing and Evaluation Technologies Related to Aging Degradation in Artfacts
  
  Pages: 120-123
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560384
[Journal Article] Evaluation of Plane Bending Fatigue Damage in SUS304 by Magnetic Sensors2006
- Author(s)
  M.Oka, T.Yakushiji, Y.Tsuchida, M.Enokizono
- Journal Title
  
  Proceedings of The 15^<th> MAGDA Conference in Kiryuu
  
  Pages: 144-147
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560384
[Journal Article] Non-destructive Evaluation of Fatigue in SUS304 Using an Excitation Type Magnetic Sensor2006
- Author(s)
  M.Oka, T.Yakushiji, T.Tsuchida, M.Enokizono
- Journal Title
  
  Proceedings of Oita University-Seoul National University Joint Symposium on the Applied Electromagnetics
  
  Pages: 45-46
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560384
[Journal Article] Development of the Non-destructive Evaluation System Using the Eddy Current Probe for Detection of Fatigue Damage in a Stainless Steel2006
- Author(s)
  M.Oka, T.Yakushiji, Y.Tsuchida, M.Enokizono
- Journal Title
  
  Review of Progress in Quantitative Nondestructive Evaluation, American Institute of Physics CP820, Vol.25A
  
  Pages: 323-329
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560384
[Journal Article] Evaluation of Fatigue Damage in an Austenitic Stainless Steel (SUS304) Using the Eddy Current Probe2005
- Author(s)
  M.Oka, T.Yakushiji, Y.Tsuchida, M.Enokizono
- Journal Title
  
  ABSTRACTS of The 2005 IEEE International Magnetic Conference BW-09
  
  Pages: 214-214
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560371
[Journal Article] Non-destructive Evaluation of Plane Bending Fatigue Damage in SUS304 Using an Eddy Current Probe2005
- Author(s)
  M.Oka, T.Yakushiji, T.Tsuchida, M.Enokizono
- Journal Title
  
  Short Paper Proceedings of ISEM-2005(Bad Gastein, Austria)
  
  Pages: 298-299
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560384
[Journal Article] Fatigue Dependence of the Residual Leakage Magnetic Flux Density in SUS3162005
- Author(s)
  M.Oka, T.Yakushiji, T.Tsuchida, M.Enokizono
- Journal Title
  
  Proceedings of Seoul National University Oita University Joint Symposium on the Applied Electromagnetics
  
  Pages: 49-50
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560371
[Journal Article] Evaluation of the the Amount of Fatigue Damage in Austenitic Stainless Steels by the Leakage Magnetic Flux2004
- Author(s)
  M.Oka, T.Yakushiji, Y.Tsuchida, M.Enokizono
- Journal Title
  
  Proceedings of The 14^<th> MAGDA Conference in Gifu
  
  Pages: 170-175
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560371
[Journal Article] Evaluation of the Plane Bending Fatigue Damage in Austenitic Stainless Steels (SUS316 and SUS316L) by the Leakage Magnetic Flux2004
- Author(s)
  M.Oka, E.Wada, T.Yakushiji, Y.Tsuchida, M.Enokizono
- Journal Title
  
  Proceedings of The 13^<th> MAGDA Conference in Sendai
  
  Pages: 203-206
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560371
[Journal Article] Evaluation of Tensile Strain in SUS316L Using the Magnetic Sensor2004
- Author(s)
  Y.Tsuchida, M.Oka, T.Yakushiji, M.Enokizono
- Journal Title
  
  Proceedings of The 13^<th> MAGDA Conferencein Sendai
  
  Pages: 181-184
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560371
[Journal Article] Evaluation of Fatigue Damage in SUS316 and SUS316L Using the FG Magnetic Sensor2004
- Author(s)
  M.Oka, E.Wada, T.Yakushiji, Y.Tsuchida, M.Enokizono
- Journal Title
  
  The 10th International Workshop on Electromagnetic Nondestructive Evaluation, 2004 ENDE Short Papers
  
  Pages: 80-81
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560371
[Patent] 切削摩擦加工用チップ2012
- Inventor(s)
  薬師寺輝敏
- Industrial Property Rights Holder
  独立行政法人国立高等専門学校機構
- Industrial Property Number
  2012-074218
- Filing Date
  2012-03-28
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] Microstructure and fatigue properties of Cu-Ni-Si alloy strengthened by Ni2Si intrametric compounds2021
- Author(s)
  Masahiro Goto, Takahito Utsunomiya, Takaei Yamamoto, Seung-zeon Han, Junichi Kitamura、Jee Hyuk Ahn, Sung Hwan Lim, Terutoshi Yakushiji, Jehyun Lee
- Organizer
  20th International Conference on Computational Methods and Experimental Measurements
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Presentation] Fatigue behavior of age-hardening Cu-6Ni-1.5Si alloys with different grain sizes2021
- Author(s)
  Masahiro Goto, Takaei Yamamoto, Seung-zeon Han, Junichi Kitamura, Terutoshi Yakushiji, Jee-hyuk Ahn, Jehyun Lee
- Organizer
  International Conference on Processing & Manufacturing of Advanced Materials
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Presentation] Fatigue behavior of Cu-6Ni-1.5Si alloy with discontinuous precipitates and the effect of difference in rolling before solution heat treatment2020
- Author(s)
  Masahiro Goto, Takaei Yamamoto, Seung Zeon Han, Junichi Kitamura, Takahito Utsunomiya, Jee-hyuk Ahn, Terutoshi Yakushiji, Jehyun Lee
- Organizer
  19th International Conference on Fracture and Damage Mechanics
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Presentation] 切削摩擦加工材の疲労き裂発生及び停留挙動に及ぼす圧縮残留応力の影響2020
- Author(s)
  岩下健，薬師寺輝敏，竹尾恭平，中島祐介
- Organizer
  日本材料学会九州支部第7回学術講演会
- Data Source
  KAKENHI-PROJECT-18H01340
[Presentation] BEHAVIOUR OF SMALL FATIGUE-CRACKS IN CU-5.5NI-1.28SI ALLOY ROUND-BAR SPECIMENS2019
- Author(s)
  Masahiro Goto, Takaei Yamamoto, Seung-zeon Han, Jee Hyuk Ahn, Junichi Kitamura、Ryotaroh Takanami, Terutoshi Yakushiji, Jehyun Lee
- Organizer
  19th International Conference on Computational Methods and Experimental Measurements
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Presentation] Growth Rate of Small Surface-Cracks in Age Hardening Cu-Ni-Si Alloy under Cyclic Stressing Microstructure and fatigue behavior of precipitation hardening Cu-Ni-Si alloy2019
- Author(s)
  Masahiro Goto, Takaei Yamamoto, Junichi Kitamura, Seung-zeon Han、Ryotaroh Takanami, Terutoshi Yakushiji, Jehyun Lee
- Organizer
  The 18th international conference on fracture and damage mechanics
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Presentation] Microstructure and Fatigue strength of Cu-6Ni-1.5Si alloy2018
- Author(s)
  Takashi Iwamura, Masahiro Goto, Takaei Yamamoto, Junichi Kitamura, Terutoshi Yakushiji
- Organizer
  3rd International Conference on Design, Materials and Manufacturing
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Presentation] Microstructure and fatigue behavior of precipitation hardening Cu-Ni-Si alloy2018
- Author(s)
  Masahiro Goto, Seungzeon. Han, Takaei Yamamoto, Junichi Kitamura, Takashi Iwamura, Terutoshi Yakushiji
- Organizer
  EMN Meeting on Alloys and Compounds
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Presentation] Role of precipitate microstructure near grain boundaries on the behavior of fatigue cracks in Cu-6Ni-1.5Si alloy2018
- Author(s)
  Masahiro GOTO, Takaei YAMAMOTO, Seung-zeon HAN, Junichi KITAMURA, Takashi IWAMURA, Terutoshi YAKUSHIJI
- Organizer
  2018 International Conference on Material Strength and Applied Mechanics
- Invited
- Data Source
  KAKENHI-PROJECT-18H01340
[Presentation] Behavior of fatigue cracks generated from a small artificial-defect in plain specimen of copper processed by equal channel angular pressing2018
- Author(s)
  Masahiro Goto, Takashi Iwamura, Takaei Yamamoto, Seung-zeon Han, Junichi Kitamura、 Terutoshi Yakushiji
- Organizer
  International Conference on　PROCESSING & MANUFACTURING OF ADVANCED MATERIALS
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01340
[Presentation] 積層コイル型磁気センサを用いた冷間圧延鋼板(SPCC)の平面曲げ疲労評価2016
- Author(s)
  岡茂八郎, 薬師寺輝敏, 榎園正人
- Organizer
  第25回MAGDAコンファレンス in Kiryu
- Place of Presentation
  群馬県桐生市
- Year and Date
  2016-11-24
- Data Source
  KAKENHI-PROJECT-26420406
[Presentation] The Evaluation of Fatigue Caused by Plane-Bending Stress on Stainless Steel Using the Stacked-Coil Type Magnetic Sensor2016
- Author(s)
  M. Oka, T. Yakushiji, and M. Enokizono
- Organizer
  Combined Abstracts 2016 PDF of QNDE-Georgia (USA)
- Place of Presentation
  Georgia , Atlanta, USA
- Year and Date
  2016-07-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420406
[Presentation] 摩擦加工した V 溝切欠き材の回転曲げ疲労特性2015
- Author(s)
  佐藤拓馬，薬師寺輝敏摩擦加工した V 溝切欠き材の回転曲げ疲労特性
- Organizer
  日本材料学会九州支部第2回学術講演会
- Place of Presentation
  長崎大学工学部
- Year and Date
  2015-09-25
- Data Source
  KAKENHI-PROJECT-26420035
[Presentation] 引張圧縮疲労試験における摩擦加工材の疲労強度評価2015
- Author(s)
  安部佑一，原田努，薬師寺輝敏
- Organizer
  日本材料学会九州支部第2回学術講演会
- Place of Presentation
  長崎大学工学部
- Year and Date
  2015-09-25
- Data Source
  KAKENHI-PROJECT-26420035
[Presentation] 大分高専が研究・開発した新しい加工技術について2015
- Author(s)
  薬師寺輝敏
- Organizer
  第２回ものづくり大分産学交流会
- Place of Presentation
  別府国際コンベンションセンター（大分県別府市山の手町）
- Year and Date
  2015-02-26
- Data Source
  KAKENHI-PROJECT-26420035
[Presentation] 強変形加工した銅の組織と機械的性質2015
- Author(s)
  馬場将臣，藤村哲也，山本隆栄，薬師寺輝敏，後藤真宏
- Organizer
  日本機会学会第23回機械材料・材料加工技術講演会
- Place of Presentation
  広島大学　東広島キャンパス
- Year and Date
  2015-11-15
- Data Source
  KAKENHI-PROJECT-26420035
[Presentation] Evaluation of Fatigue Damage Induced by Pulsating Tension Stress and Plane Bending Stress Using the Remnant Magnetization Method2015
- Author(s)
  M. Oka, Yuki Sato, T. Yakushiji, and M. Enokizono
- Organizer
  17th International Symposium on Applied Electromagnetics and Mechanics
- Place of Presentation
  Kobe city
- Year and Date
  2015-09-15
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420406
[Presentation] 表面を摩擦加工したS45C焼きなまし材の回転曲げ疲労特性2013
- Author(s)
  中川文紀,薬師寺輝敏
- Organizer
  日本機械学会九州支部第66期総会講演会
- Place of Presentation
  九州産業大学
- Year and Date
  2013-03-13
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 磁気的手法によるオーステナイトステンレス(SUS316L)の片振引張疲労評価2013
- Author(s)
  岡茂八郎,薬師寺輝敏,榎園正人
- Organizer
  第22回MAGDAコンファレンス in 宮崎電磁現象および電磁力に関するコンファレンス
- Place of Presentation
  宮崎観光ホテル（宮崎県宮崎市）
- Data Source
  KAKENHI-PROJECT-23560518
[Presentation] Fatigue Evaluation of the Iron-based Structural Material (SUS430) by the Eddy Current Sensor under the DC Magnetic Field2013
- Author(s)
  T. Komiya, M. Oka, T. Yakushiji, and M. Enokizono
- Organizer
  15th Japan Korea Joint Symposium on the Applied Electromagnetics
- Place of Presentation
  Sungkyunkwan University (Suwon Korea)
- Year and Date
  2013-02-01
- Data Source
  KAKENHI-PROJECT-23560518
[Presentation] Fatigue Evaluation of the Iron-based Structural Material (SUS430) by the Eddy Current Sensor under the DC Magnetic Field2013
- Author(s)
  T. Komiya, M. Oka, T. Yakushiji, and M. Enokizono
- Organizer
  Proceedings of 15th Japan Korea Joint Symposium on the Applied Electromagnetics
- Place of Presentation
  Sungkyunkwan University (Suwon City, 韓国)
- Data Source
  KAKENHI-PROJECT-23560518
[Presentation] 磁気的手法によるオーステナイトステンレス(SUS316L)の片振引張疲労評価2013
- Author(s)
  岡茂八郎,薬師寺輝敏,榎園正人
- Organizer
  第22回MAGDAコンファレンスin宮崎電磁現象および電磁力に関するコンファレンス
- Place of Presentation
  宮崎観光ホテル(宮崎県宮崎市)
- Year and Date
  2013-12-02
- Data Source
  KAKENHI-PROJECT-23560518
[Presentation] 旋盤を使用して表面改質を行うための切削摩擦加工チップ2012
- Author(s)
  薬師寺輝敏
- Organizer
  九州沖縄地区国立高専新技術マッチングフェア
- Place of Presentation
  福岡マリンメッセ
- Year and Date
  2012-10-25
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] チタン合金予ひずみ材の回転曲げ疲労特性2012
- Author(s)
  佐藤一樹,薬師寺輝敏,大山英人
- Organizer
  第21回九州沖縄地区高専ファーラム
- Place of Presentation
  大分工業高等専門学校
- Year and Date
  2012-12-03
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 摩擦加工を施したTi-6Al-4V合金の表面組織と回転曲げ疲労特性2012
- Author(s)
  薬師寺輝敏
- Organizer
  日本機械学会第20回機械材料・材料加工技術講演会
- Place of Presentation
  大阪工業大学大宮キャンパス
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 表層に微細結晶粒を有するTi合金の回転曲げ疲労特性2012
- Author(s)
  渡部杏伍,薬師寺輝敏
- Organizer
  日本機械学会九州学生会,第43回卒業研究発表講演会
- Place of Presentation
  佐世保工業高等専門学校
- Year and Date
  2012-03-12
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 摩擦加工したS45C焼鈍し材の疲労特性2012
- Author(s)
  中川文紀, 薬師寺輝敏
- Organizer
  日本機会学会九州学生会,第43回卒業研究発表講演会
- Place of Presentation
  佐世保工業高等専門学校
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] Examination of the Inductance Method for Non-Destructive Testing in Structural Metallic Material by Means of the Pancake-type Coil2012
- Author(s)
  M. Oka, T. Yakushiji, Y. Tsuchida, and M. Enokizono
- Organizer
  7th Asia-Pacific symposium on Applied Electromagnetics and Mechanics
- Place of Presentation
  Majestic Saigon Hotel (Ho Chi Minh City, Vietnam)
- Year and Date
  2012-07-26
- Data Source
  KAKENHI-PROJECT-23560518
[Presentation] 摩擦加工したS45C焼鈍し材の疲労特性2012
- Author(s)
  中川文紀,薬師寺輝敏
- Organizer
  日本機械学会九州学生会,第43回卒業研究発表講演会
- Place of Presentation
  佐世保工業高等専門学校
- Year and Date
  2012-03-12
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 強変形加工により形成された銅の微細組織と疲労強度2012
- Author(s)
  山内康太郎，薬師寺輝敏
- Organizer
  日本機械学会第20回機械材料・材料加工技術講演会
- Place of Presentation
  大阪工業大学大宮キャンパス
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 表層に微細結晶粒を有するTi合金の回転曲げ疲労特性2012
- Author(s)
  渡部杏伍, 薬師寺輝敏
- Organizer
  日本機会学会九州学生会,第43回卒業研究発表講演会
- Place of Presentation
  佐世保工業高等専門学校
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 摩擦加工を施したTi-6Al-4v合金の表面組織と回転曲げ疲労特性2012
- Author(s)
  薬師寺輝敏,渡部杏伍,後藤真宏,亘高義一
- Organizer
  第20回機械材料・材料加工技術講演会
- Place of Presentation
  大阪工業大学大宮キャンパス
- Year and Date
  2012-12-02
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] Effect of Pre-stressing on the Growth Direction of Surface Cracks in Ultrafine Grained Copper2012
- Author(s)
  K. Kamil，T. Yakushiji
- Organizer
  4th international conference on crack path,(CP2012)
- Place of Presentation
  Villa Irland Hotel　Gaeta, Italy
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] Effect of Pre-stressing on the Growth Direction of Surface Cracks in Ultrafine Grained Copper2012
- Author(s)
  K. Kamil, M. Goto, S. Z. Han, K. Euh, T. Yakushiji and Y. Tatsukawal
- Organizer
  4th international conference on crack path, 19th September 2012
- Place of Presentation
  Villa Irland Hotel Gaeta, Italy
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] Examination of the Inductance Method for Non-Destructive Testing in Structural Metallic Material by Means of the Pancake-type Coil2012
- Author(s)
  M. Oka, T. Yakushiji, Y. Tsuchida, and M. Enokizono
- Organizer
  Digests of 7th Asia-Pacific symposium on Applied Electromagnetics and Mechanics
- Place of Presentation
  Majestic Hotel (Ho Chi Minh City, ベトナム)
- Data Source
  KAKENHI-PROJECT-23560518
[Presentation] 強変形加工により形成された銅の微細組織と疲労強度2012
- Author(s)
  立川裕也,後藤真宏,手島規博,山内康太郎,Kamil Kusno,薬師寺輝敏
- Organizer
  第20回機械材料・材料加工技術講演会
- Place of Presentation
  大阪工業大学大宜キャンパス
- Year and Date
  2012-12-02
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 超微細粒銅のき裂進展挙動に及ぼす応力レベルの影響2011
- Author(s)
  横尾勇治, 後藤真宏, 薬師寺輝敏, 立川裕出, KUSNO KAMTL, 皮能石紀雄
- Organizer
  日本機械学会九州支部大分地方講演会
- Place of Presentation
  宮崎大学
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 表層に微細結晶粒を有するTi合金の回転曲げ疲労特性2011
- Author(s)
  渡部杏伍, 薬師寺輝敏, 戸高義一
- Organizer
  軽金属学会第121回秋季大会
- Place of Presentation
  早稲田大学
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] Fatigue Evaluation of Low Carbon Steel by Means of the Inductance Method Using a Pancake-Type Coil2011
- Author(s)
  M. Oka, T. Yakushiji, Y. Tsuchida, and M. Enokizono
- Organizer
  20th MAGDA Conference in Pacific Asia
- Place of Presentation
  Garden Villa Kaohsiung (Kaohsiung Taiwan)
- Year and Date
  2011-11-16
- Data Source
  KAKENHI-PROJECT-23560518
[Presentation] レプリカ法による表面観察で明らかにされた事2011
- Author(s)
  薬師寺輝敏
- Organizer
  M&M2011材料力学カンファレンス講演会
- Place of Presentation
  九州工業大学
- Year and Date
  2011-07-18
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] チタン合金予ひずみ材の回転曲げ疲労特性2011
- Author(s)
  佐藤一樹,薬師寺輝敏,大山英人,逸見義男
- Organizer
  軽金属学会第121回秋季大会
- Place of Presentation
  早稲田大学西早稲田キャンパス
- Year and Date
  2011-11-12
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] Ti合金の表面ナノ結晶粒創製と疲労特性2011
- Author(s)
  渡部杏伍,薬師寺輝敏
- Organizer
  日本機械学会九州学生会第42回卒業研究発表講演会
- Place of Presentation
  大分工業高等専門学校
- Year and Date
  2011-03-11
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 表層に微細結晶粒を有するTi合金の回転曲げ疲労特性2011
- Author(s)
  渡部杏伍,薬師寺輝敏,戸高義一
- Organizer
  軽金属学会第121回秋季大会
- Place of Presentation
  早稲田大学西早稲田キャンパス
- Year and Date
  2011-11-12
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] Fatigue Evaluation of Low Carbon Steel by Means of the Inductance Method Using a Pancake-Type Coil2011
- Author(s)
  M. Oka, T. Yakushiji, Y. Tsuchida, and M. Enokizono
- Organizer
  The 20th MAGDA Conference in Pacific Asia
- Place of Presentation
  Kaohsiung, Taiwan
- Data Source
  KAKENHI-PROJECT-23560518
[Presentation] 超微細粒銅のき裂進展挙動に及ぼす応カレベルの影響2011
- Author(s)
  横尾勇治,後藤真宏,薬師寺輝敏,立川裕出,KUSNO KAMTL,皮能石紀雄
- Organizer
  日本機械学会九州支部宮崎講演会
- Place of Presentation
  宮崎大学木花キャンパス
- Year and Date
  2011-09-30
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] チタン合金予ひずみ材の回転曲げ疲労特性2011
- Author(s)
  佐藤一樹, 薬師寺輝敏, 大山英人, 逸見義男
- Organizer
  軽金属学会第121回秋季大会
- Place of Presentation
  早稲田大学
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] チタン合金予ひずみ材の回転曲げ疲労特性2011
- Author(s)
  佐藤一樹, 薬師寺輝敏, 大山英人
- Organizer
  第21回九州沖縄地区高専ファーラム講演会
- Place of Presentation
  大分工業高等専門学校
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 摩擦加工により形成した表層ナノ結晶粒組織をもつS45C調質材の回転曲げ疲労特牲2010
- Author(s)
  神志那薫,戸高義一,梅本実,薬師寺輝敏
- Organizer
  日本鉄鋼協会秋季講演大会
- Place of Presentation
  北海道大学札幌キャンパス
- Year and Date
  2010-09-26
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 微小孔を有する超微細流銅平滑材￠微小き裂進展挙動2010
- Author(s)
  横尾勇治,後藤真宏,薬師寺輝敏,韓理博
- Organizer
  日本機械学会中国匹国支部・九州支部合同企画
- Place of Presentation
  徳島大学
- Year and Date
  2010-10-16
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] NON-DESTRUCTIVE EVALUATION OF FATIGUE DAMAGE FOR SUS316 BY USING ELECTROMAGNETIC METHODS2009
- Author(s)
  M. Oka, Y. Tsuchida, T. Yakushiji, and M. Enokizono
- Organizer
  Review of Progress in Quantitative Nondestructive Evaluation, American Institute of Physics, CP1096, Vol. 28B, pp. 1442-1449
- Data Source
  KAKENHI-PROJECT-19560434
[Presentation] 電磁気的性質の変化を利用したステンレス鋼(SUS304, SUS316)の疲労評価2008
- Author(s)
  岡茂八郎, 薬師寺輝敏, 槌田雄二, 榎園正人
- Organizer
  第20回「電磁力関連のダイナミクス」シンポジウム講演論文集, pp. 29-32
- Data Source
  KAKENHI-PROJECT-19560434
[Presentation] パンケーキ型コイルによるステンレス鋼の疲労評価2008
- Author(s)
  岡茂八郎,宮崎翔太,薬師寺輝敏, 槌田雄二, 榎園正人
- Organizer
  第17 回MAGDA コンファレンス in 日立電磁現象および電磁力に関するコンファレンス講演論文集, pp.115-118
- Place of Presentation
  日立
- Data Source
  KAKENHI-PROJECT-19560434
[Presentation] パンケーキ型コイルのインダクタンスの変化を利用したオーステナイトステンレス鋼の疲労評価2007
- Author(s)
  岡茂八郎, 長門真也,薬師寺輝敏, 槌田雄二, 榎園正人
- Organizer
  第16 回MAGDAコンファレンスin 京都電磁現象および電磁力に関するコンファレンス講演論文集, pp.309-312
- Data Source
  KAKENHI-PROJECT-19560434
[Presentation] パンケーキ型コイルを用いたSUS304の平面曲げ疲労評価2007
- Author(s)
  岡茂八郎, 長門真也, 薬師寺輝敏, 槌田雄二, 榎園正人
- Organizer
  日本非破壊検査協会, 第2回表面探傷分科会講演資料, pp. 31-34
- Data Source
  KAKENHI-PROJECT-19560434
[Presentation] Evaluation of the Material Degradation of Austenitic Stainless Steel under Pulsating Tension Stress Using Magnetic Methods
- Author(s)
  M. Oka, T. Yakushiji, and M. Enokizono
- Organizer
  Digests of 8th Asia-Pacific Symposium on Applied Electromagnetics and Mechanics
- Place of Presentation
  National Chung Hsing University, 台中市（台湾）
- Year and Date
  2014-07-23 – 2014-07-25
- Data Source
  KAKENHI-PROJECT-26420406
[Presentation] 表面を摩擦加工したS45C焼きなまし材の回転曲げ疲労特性
- Author(s)
  中川文紀　，薬師寺輝敏
- Organizer
  日本機械学会九州支部第66期総会講演会
- Place of Presentation
  九州産業大学
- Data Source
  KAKENHI-PROJECT-22560099
[Presentation] 摩擦加工した V 溝切欠き材の回転曲げ疲労特性
- Author(s)
  佐藤拓馬，薬師寺輝敏，工藤加寿弘
- Organizer
  日本機械学会九州支部大分講演会
- Place of Presentation
  ホルトホール大分（大分県大分市金池南）
- Year and Date
  2014-09-19 – 2014-09-20
- Data Source
  KAKENHI-PROJECT-26420035

1. OKA Mohachiro (80107838)

# of Collaborated Projects: 5 results

# of Collaborated Products: 40 results
2. ENOKIZONO Masato (40136784)

# of Collaborated Projects: 5 results

# of Collaborated Products: 32 results
3. TODAKA Yoshikazu (50345956)

# of Collaborated Projects: 2 results

# of Collaborated Products: 5 results
4. KANADA Tsugunori (70040756)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. TODAKA Takashi (50163994)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. Goto Masahiro (30170468)

# of Collaborated Projects: 1 results

# of Collaborated Products: 19 results
7. OOYAMA Hideto

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. TAKAHASHI Kenichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. SATOH Takuma

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results

YAKUSHIJI Terutoshi 薬師寺 輝敏

薬師寺 輝敏 ヤクシジ テルトシ

Research Projects

Research Products

Co-Researchers

Creation of anti-fatigue copper alloy strengthened by nanofiber-shaped discontinuous precipitate with superior conductivity and high strength

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Creation of nano-crystal-grains layer and Residual stress by the cutting and rubbing process in a notch of specimenPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of the nondestructive fatigue monitoring system using the combined-type magnetic sensor to achieve highly accurate residual life assessment

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of the New Nondestructive Material Degradation Evaluation Method Using the Low Frequency Excitation Magnetic Sensor Under the DC Magnetic Field

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Suggestion of a cutting friction working process to form the Nano crystal grained structure and characteristic evaluation.Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of the monitoring method of fatigue accumulation using the magnetic sensor to achieve preventive maintenance for ferrous structural materials

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Fatigue Evaluation System for Structural Metallic Material Using the Eddy Current Type High Sensitivity Magnetic Sensor

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Nondestructive Evaluation System Using the Excitation Type High Sensitivity Magnetic Sensor to Ddetect Fatigue Damage of Metallic Material

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Formation process of fatigue slip bands with unique configurations of ultrafine-grained high-purity Cu fabricated by severe plastic deformation2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Stress-dependent opening- and shear-mode propagation behavior of fatigue cracks in ultrafine-grained Cu fabricated by equal channel angular pressing2021

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Microstructure and fatigue properties of Cu-Si alloy strengthened by Ni2Si intermetallic compounds2021

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Crack initiation mechanism in ultrafine-grained copper fabricated by severe plastic deformation in the high-cycle fatigue regime2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Fatigue behavior of Cu-6Ni-1.5Si alloy with discontinuous precipitates and the effect of difference in rolling before solution heat treatment2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Role of compressive residual stresses produced by cutting and rubbing processing on fatigue strength of heat-treated SCM435 smooth specimens2019

Author(s)

YAKUSHIJI Terutoshi 薬師寺輝敏

薬師寺輝敏ヤクシジテルトシ

[Journal Article] S–N plots and related phenomena of ultrafine grained copper with different stages of microstructural evolutio2015