Ikuta Koji 生田幸士

… Alternative Names

生田幸士イクタコウジ

IKUTA Koji 生田幸士

IKUTA Kohji 生田幸士

Less

Researcher Number	90212745
External Links
Affiliation (Current)	2025: 立命館大学, 総合科学技術研究機構, 教授 2025: 大阪大学, 大学院医学系研究科, 招へい教授
Affiliation (based on the past Project Information) *help	2016 – 2018: 東京大学, 大学院情報理工学系研究科, 教授 2010 – 2014: 東京大学, 先端科学技術研究センター, 教授 2006: Nagoya University, Graduate School of Engineering, Professor, 大学院工学研究科, 教授 2001 – 2005: 名古屋大学, 工学研究科, 教授 1995 – 2003: 名古屋大学, 大学院・工学研究科, 教授 … More 1997: Nagoya Univ.Grad.Sch.Eng.Prof., 工学研究科, 教授 1995 – 1996: 名古屋大学, 工学部, 教授 1993: 九州工業大学, 情報工学部・機械システム工学科, 助教授 1990: 九州工業大学, 情報工学部, 助教授 Less
Review Section/Research Field	Principal Investigator Intelligent mechanics/Mechanical systems / Intelligent mechanics/Mechanical systems / Nano/Microsystems / Science and Engineering / Biomedical engineering/Biological material science / Biomedical engineering/Biological material science Except Principal Investigator Educational technology / 補綴理工系歯学 / Fluid engineering
Keywords	Principal Investigator マイクロ光造形法 / MEMS / テーラーメード製薬 / 生体適合性材料 / 2光子高速光造形法 / 光硬化性樹脂 / マイクロマシン / Biocompatibility / Two-photon high-speed stereolithography / Micro stereolithography … More / 生体適合性 / 光硬化樹脂 / Optical Drive / 光駆動 / Implantable Micro Device / Tailor-made Medicine / Micro Stereolithography / Biochemical IC / 体内埋込デバイス / マイクロ化学分析システム / 体内埋込型デバイス / テーラーメイド製薬 / 無細胞タンパク合成 / MIFS / ナノバイオ / 紫外線硬化樹脂 / マイクロデバイス / ナノバイオシステム / POC / Remote Control / Laser Trapping / Photo-curable resin / 2光子高速造形法 / マイクロ光造形 / 遠隔操作 / レーザトラッピング / Implantable device / Tailor-made drug-discovery / Photo-cureable resin / Micro Chemical Analysis System / Biocompatible Materials / Photo Curable Polymer / バイオ化学IC / Optically Driven Micromachine / Biodegradable Polymer / Two-Photon Stereolithography / マイクロ光造刑法 / マイクロバルブ / マイクロポンプ / 体内埋め込みデバイス / 光駆動マイクロマシン / 化学IC / 生分解性ポリマー / 2光子造形法 / DNA synthesis / micro reactor / Luciferase / Cell free synthesis of protein / biochemical IC / ポリマー熱電対 / ポリマーサーミスタ / ポリマーサーミスター / 光ファイバーアレイ / 大量生産形光造形法 / スーパーIHプロセス / ルミノール反応 / 生化学IC / 加工分解能 / minimum invasive surgery / surgery in the abdomial cavity / remote surgery / virtual endoscope / cybernetic actuator / hyper endoscope / 能動鉗子 / 安全軌道計画 / 低侵襲手術 / 腹腔内手術 / 遠隔手術 / バーチャル内視鏡 / サイバネティックアクチュエータ / ハイパーエンドスコープ / 移植・再生医療 / 細胞・組織 / 生体材料 / マイクロ・ナノデバイス / 医用マイクロ・ナノマシン / 細胞操作 / 光駆動マイクロロボット / スキャフォールド / 自動培養 / 再生医療 / 医用マイクロマシン / マイクロ流体回路 / 3次元微細加工 / 微細加工技術 / 光造形法 … More Except Principal Investigator Project-based Learning / assessment / creativity / globalization / engineering education / 評価 / 創造性 / 国際性 / 工学教育 / die preparation / tooth cutting / noise reduction / noise analyzes / airturbine / 騒音低域 / 支台形成 / 歯の切削 / 騒音低減 / 騒音解析 / エアタービン / Flow Visualization / Flow Separation / Stall / Flow Control / Actuator / Blade / Hydraulic Machinery / Shape Memory Alloy / ニッケル・チタン合金 / 差動式2方向性素子 / 羽根車 / 性能改善 / アクチュエ-タ / 可変翼 / 流れの可視化 / 失速 / はく離 / 形状制御 / アクチュエータ / 翼 / 水力機械 / 形状記憶合金 Less

Exosomal miRNA analysis inside Biochemical IC chips for early detection of cancerPrincipal Investigator
- Principal Investigator
  
  Ikuta Koji
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Nano/Microsystems
- Research Institution
  The University of Tokyo
Development of a Nano-Micro Platform for Tissue Engineering ApplicationsPrincipal Investigator
- Principal Investigator
  
  IKUTA Koji
- Project Period (FY)
  2010 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (S)
- Research Field
  
  Biomedical engineering/Biological material science
- Research Institution
  The University of Tokyo
Concept and Development of The Optically Driven NanomechatronicsPrincipal Investigator
- Principal Investigator
  
  IKUTA Kouji
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Nagoya University
Development of the nano device for medical use based on the Biochemical ICPrincipal Investigator
- Principal Investigator
  
  IKUTA Koji
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Nagoya University
DEVELOPMENT OF MICRO FRUID CONTROL SYSTEM BY USING MICROSTEREOLITHOGRAPHYPrincipal Investigator
- Principal Investigator
  
  IKUTA Koji
- Project Period (FY)
  2001 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  NAGOYA UNIVERSITY
DEVELOPMENT OF BIOCHEMICAL IC CHIPSPrincipal Investigator
- Principal Investigator
  
  IKUTA Koji
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  NAGOYA UNIVERSITY
Development of creativity education and evaluation methods
- Principal Investigator
  
  OHNAKA Itsuo
- Project Period (FY)
  1998 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Educational technology
- Research Institution
  Osaka University
Development of the tooth preparation system with low noize and facility to support die preparation
- Principal Investigator
  
  SOHMURA Taiji
- Project Period (FY)
  1995 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  補綴理工系歯学
- Research Institution
  Osaka University
Study of Minimum Invasive Remote Surgery in the Abdomial CavityPrincipal Investigator
- Principal Investigator
  
  IKUTA Koji
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Biomedical engineering/Biological material science
- Research Institution
  Nagoya University
Study of Micro Integrated Fluid System using Micro Stereo LithographyPrincipal Investigator
- Principal Investigator
  
  IKUTA Koji
- Project Period (FY)
  1995 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Nagoya University
集束光を用いた3次元微細構造物作製法に関する研究Principal Investigator
- Principal Investigator
  
  生田幸士
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Kyushu Institute of Technology
Enhancement of Hydraulic Machinery by Use of Shape Memory Alloys
- Principal Investigator
  
  TSUKAMOTO Hiroshi
- Project Period (FY)
  1990 – 1992
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  Fluid engineering
- Research Institution
  Kyushu Institute of Technology

[Book] リキッドバイオプシー（落谷孝広）内の"早期癌発見をめざすマイクロRNA分析用ポータブルデバイスの開発"2017
- Author(s)
  生田幸士
- Publisher
  シーエムシー出版
- ISBN
  9784781312590
- Data Source
  KAKENHI-PROJECT-16H02094
[Book] 電子物性・材料の事典2006
- Author(s)
  生田幸士(分担)
- Total Pages
  696
- Publisher
  朝倉書店
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Book] レーザープロセシング応用便覧2006
- Author(s)
  生田幸士(分担)
- Total Pages
  590
- Publisher
  NGTコーポレーション
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Book] 岩波講座ロボット学6 ロボットフロンティア2005
- Author(s)
  生田幸士(共著)
- Total Pages
  218
- Publisher
  岩波書店
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Book] Tensegrity and Signal Transduction -New Application of Liposome2005
- Author(s)
  K.Ikuta
- Publisher
  NTS(In press)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Book] 岩波講座ロボット学 42005
- Author(s)
  生田幸士(共著)
- Publisher
  岩波書店(印刷中)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Book] マイクロマシン技術総覧(樋口俊郎他編)2003
- Author(s)
  生田幸士(分担執筆)
- Total Pages
  753
- Publisher
  産業技術サービスセンター
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Book] "化学IC",ナノテクノロジー大事典2003
- Author(s)
  生田幸士
- Total Pages
  989
- Publisher
  工業調査会
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Book] "マイクロ光造形法を利用した医療デバイス・化学ICチップへの応用",微細加工技術(応用編)-フォトニクス・エレクトロニクス・メカトロニクスへの応用2003
- Author(s)
  生田幸士
- Total Pages
  224
- Publisher
  エヌ・ティー・エス
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Book] Iwanami Course on Robotics 42003
- Author(s)
  K.Ikuta
- Publisher
  Iwanami Publishing(In press)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Book] Three-dimensional Nanoengineered Assemblies2003
- Author(s)
  K.Ikuta 共著
- Total Pages
  292
- Publisher
  Material Research Society
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 3D microdevices that perform sample purification and multiplex qRT-PCR for early cancer detection with confirmation of specific RNAs2018
- Author(s)
  Y. Kimura, M. Ikeuchi, Y. Inoue, K. Ikuta
- Journal Title
  
  Scientific Reports
  
  Volume: 8 Issue: 1 Pages: 17480-17480
- DOI
  10.1038/s41598-018-35772-y
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-16H02094
[Journal Article] Modeling and measurement of curing properties of photocurable polymer containing magnetic particles and microcapsules2017
- Author(s)
  Masato Yasui, Koji Ikuta
- Journal Title
  
  Microsystems & Nanoengineering
  
  Volume: 3 Issue: 1 Pages: 1-9
- DOI
  10.1038/micronano.2017.35
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PUBLICLY-16H01559, KAKENHI-PROJECT-16H02094
[Journal Article] Density controllable photocurable polymer for 3D magnetic　microstructures with neutral buoyancy2013
- Author(s)
  M. Yasui, M.Ikeuchi, K. Ikuta
- Journal Title
  
  Appl. Phys. Lett.
  
  Volume: 103 Issue: 20 Pages: 201901-201901
- DOI
  10.1063/1.4829136
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22220008
[Journal Article] Optically Driven Micro-pinch to Mechanically Analyze Cellular Protein2013
- Author(s)
  N Shimada, K Kadoguchi, M Ikeuchi, K Ikuta
- Journal Title
  
  Procedia CIRP
  
  Volume: 5 Pages: 124-127
- DOI
  10.1016/j.procir.2013.01.025
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22220008
[Journal Article] 新概念マイクロマシンから攻める再生医療三次元微細加工技術による胚葉体培養アレイ2013
- Author(s)
  生田幸士，池内真志
- Journal Title
  
  バイオマテリアル
  
  Volume: 31 Pages: 165-170
- Data Source
  KAKENHI-PROJECT-22220008
[Journal Article] Detoxification of the Photocurable Polymer by Heat Treatment for Microstereolithography2013
- Author(s)
  Y Inoue, K Ikuta
- Journal Title
  
  Procedia CIRP
  
  Volume: 5 Pages: 115-118
- DOI
  10.1016/j.procir.2013.01.023
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22220008
[Journal Article] Electrospray Deposition and Direct Patterning of Polylactic Acid Nanofibrous Microcapsules for Tissue Engineering2012
- Author(s)
  Masashi Ikeuchi, Ryosuke Tane, Koji Ikuta
- Journal Title
  
  Biomedical Microdevices
  
  Volume: 14 Issue: 1 Pages: 35-43
- DOI
  10.1007/s10544-011-9583-x
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22220008, KAKENHI-PROJECT-22650127
[Journal Article] Pressure Pulse Drive: A Control Method for the Precise Bending of Hydraulic Active Catheters2012
- Author(s)
  Koji Ikuta, Yoshikatsu Matsuda, Daisuke Yajima, Yusuke Ohta
- Journal Title
  
  IEEE/ASME Transactions on Mechatronics
  
  Volume: 17 Issue: 5 Pages: 876-883
- DOI
  10.1109/tmech.2011.2138711
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22220008
[Journal Article] 高安全水圧駆動方式能動カテーテルの研究(第2報次元解析と実験に基づく定量設計)2011
- Author(s)
  矢島大輔, 福田暁子, 生田幸士
- Journal Title
  
  日本機械学会論文集C編
  
  Volume: 77 Pages: 411-420
- NAID
  130000873750
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22220008
[Journal Article] Reduction of Cytotoxicity by High Temperature Heat Treatment for Microstereolithography2011
- Author(s)
  Yoshinori Inoue, Koji Ikuta
- Journal Title
  
  Journal of Japan Society of Computer Aided Surgery
  
  Volume: 13 Pages: 67-73
- NAID
  10030199047
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22220008
[Journal Article] 高温加熱処理によるマイクロ光造形樹脂の細胞毒性低減手法2011
- Author(s)
  井上佳則, 生田幸士
- Journal Title
  
  日本コンピュータ外科学会誌
  
  Volume: 13 Pages: 67-73
- NAID
  10030199047
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22220008
[Journal Article] Pressure Pulse Drive : A Control Method for the Precise Bending of Hydraulic Active Catheters2011
- Author(s)
  Koji Ikuta, Yoshikatsu Matsuda, Daisuke Yajima, Yuske Ohta
- Journal Title
  
  IEEE/ASME TRANSACTIONS ON MECHATRONICS
  
  Volume: 99 Pages: 1-8
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22220008
[Journal Article] 高安全水圧駆動能動カテーテルの研究2010
- Author(s)
  生田幸士, 市川尋信, 鈴木克也, 松田喜勝, 矢島大輔
- Journal Title
  
  日本機械学会論文集C編
  
  Volume: 76 Pages: 1553-1559
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22220008
[Journal Article] マイクロナノ光造形法が拓く光駆動ナノロボットと未来医用デバイス2010
- Author(s)
  生田幸士, 池内真志
- Journal Title
  
  O plius E
  
  Volume: 32 Pages: 544-547
- Data Source
  KAKENHI-PROJECT-22220008
[Journal Article] Takashi Kato, Hiroki Ooe and Kazuhiko Shinohara, Development of Surgery Recorder System for Minimally Invasive Surgery2007
- Author(s)
  Koji Ikuta
- Journal Title
  
  Trans. JSMBE 45(1), (in press)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 多分岐切換用ロータリ形マイクロバルブチップ(第1報,ロータリ機構を利用した多分岐切換原理の実証)2007
- Author(s)
  Tadahiro Hasegawa, Kenichiro Nakajima, Koji Ikuta
- Journal Title
  
  Trans. JSME C 73(727)
  
  Pages: 811-816
- NAID
  110006271403
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 多分岐切換用ロータリー型マイクロバルブチップ(第1報)ロークリー機構を利用した多分岐切換原理の実証2007
- Author(s)
  長谷川忠大, 中嶋健一郎, 生田幸士
- Journal Title
  
  日本機械学会論文集 C編 73 (727)
  
  Pages: 811-816
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] New Biochemical IC chips for Overall Protein Analysis with micro sampling2007
- Author(s)
  Koji Ikuta, Nobuhiko Satake, Tatsuya Ohashi, Mayuko Shibata
- Journal Title
  
  Trans. JSMBE 44(4), (in press)
- NAID
  10021287454
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 多分岐切換用ロータリー型マイクロバルブチップ(第1報)ロータリー機構を利用した多分岐切換原理の実証2007
- Author(s)
  長谷川忠大, 中嶋健一郎, 生田幸士
- Journal Title
  
  日本機械学会論文集C編 73 (727)
  
  Pages: 811-816
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 全工程微量サンプル蛋白分析用化学ICチップ群の開発2007
- Author(s)
  生田幸士, 佐竹宣彦, 大橋竜也, 柴田真由子
- Journal Title
  
  生体医工学 44(4)(印刷中)
- NAID
  110006381542
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 低侵襲手術用サージェリレコーダの開発と動物実験による機能検証2007
- Author(s)
  生田幸士, 加藤大香士, 大栄広樹, 篠原一彦
- Journal Title
  
  生体医工学 45(1)(印刷中)
- NAID
  110006381540
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 「研究成果報告書概要(欧文)」より2006
- Author(s)
  Koji Ikuta (Co-author)
- Journal Title
  
  Iwanami Course on Robotics6-Robot Frontier 218
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 「研究成果報告書概要(欧文)」より2006
- Author(s)
  Koji Ikuta (Co-author)
- Journal Title
  
  NGT, Handbook of laser processing 590
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] On-site Size-selective Particle Sampling Using Mesoporous Polymer Membrane Microfluidic Device2006
- Author(s)
  Masashi Ikeuchi, Koji Ikuta
- Journal Title
  
  Proc. μTAS' 06 Conference Tokyo
  
  Pages: 1169-1171
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 特集医療・福祉用ロボットの現状と将来展望「未来医療を進化させる新原理バイオロボティクス」2006
- Author(s)
  生田幸士
- Journal Title
  
  金属 76・1
  
  Pages: 9-11
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Three-dimensional Microfabrication for Biodegradable Polymers Toward Implantable Micro Devices2006
- Author(s)
  Akira Yamada, Fuminori Niikura, Koji Ikuta
- Journal Title
  
  Proc. μTAS'06 Conference Tokyo
  
  Pages: 684-686
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 「研究成果報告書概要(欧文)」より2006
- Author(s)
  Koji Ikuta (Co-author)
- Journal Title
  
  Asakura, Denshi-bussei / Zairyo no Jiten 696
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Multi-degree of Freedom Hydraulic Pressure Driven Safety Active Catheter2006
- Author(s)
  K.Ikuta, H.Ichikawa, K.Suzuki, D.Yajima
- Journal Title
  
  Proc. 2006 IEEE International Conference on Robotics and Automation (ICRA' 06)
  
  Pages: 4161-4166
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 新原理マイクロ・ナノマシンによる未来医療-化学ICとバイオロボットの夢-2006
- Author(s)
  生田幸士
- Journal Title
  
  未来医療 21
  
  Pages: 44-48
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] バイオ化学ICチップと反応観測制御システム2006
- Author(s)
  生田幸士
- Journal Title
  
  電気情報通信学会誌 89・5
  
  Pages: 411-418
- NAID
  110004735703
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Novel Biorobotics for Evolution of Future Medicine2006
- Author(s)
  Koji Ikuta
- Journal Title
  
  Kinzoku 76・1
  
  Pages: 9-11
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] ポリマー薄膜を用いた三次元マイクロ流路デバイスの研究-再生医療のための人工毛細血管の開発2006
- Author(s)
  池内真志, 生田幸士
- Journal Title
  
  日本コンピュータ外科学会誌 17・4(印刷中)
- NAID
  10021286894
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 特集愛・地球博のロボット『遠隔微細手術ロボット「マイクロフィンガー・ハイパーフィンガー」』2006
- Author(s)
  生田幸士
- Journal Title
  
  日本ロボット学会誌 24・2
  
  Pages: 38-38
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 特集医療・福祉用ロボットの現状と将来展望「未来医療を進化させる新原理バイオロボティクス」2006
- Author(s)
  生田幸士
- Journal Title
  
  金属 76・1
  
  Pages: 9-11
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 新原理マイクロ・ナノデバイスによる人工臓器研究-光で作って光で動かすナノマシンとバイオ化学ICチップ2006
- Author(s)
  生田幸士
- Journal Title
  
  第43回日本人工臓器学会大会予稿集
  
  Pages: 13-18
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Future Medicine Realized by Novel Micro/Nano Machine-Chemical IC and Biorobot-2006
- Author(s)
  Koji Ikuta
- Journal Title
  
  Future Medicine 21
  
  Pages: 44-48
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 名物研究者からの未来の研究者へのメッセージ2006
- Author(s)
  生田幸士
- Journal Title
  
  ロボコンマガジン 49
  
  Pages: 122-124
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 特集愛・地球博のロボット『遠隔微細手術ロボット「マイクロフィンガー・ハイパーフィンガー」』2006
- Author(s)
  生田幸士
- Journal Title
  
  日本ロボット学会誌 24・2
  
  Pages: 38-38
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] The Membrane Micro Emboss (MeME) Process for Fabricating 3-D Microfluidic Device Formed from Thin Polymer Membrane2006
- Author(s)
  Masashi Ikeuchi, Koji Ikuta
- Journal Title
  
  Proc. μTAS' 06 Conference Tokyo
  
  Pages: 693-695
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Air Pressure Type Micro Dispenser System without any Dead Volume for Portable Micro Chemical Device2006
- Author(s)
  Tadahiro Hasegawa, Fumiyuki Omatsu, Toshiyuki Tsuji, Koji Ikuta
- Journal Title
  
  Proc. μTAS'06 Conference Tokyo
  
  Pages: 1112-1114
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Message from established scientists to future scientists2006
- Author(s)
  Koji Ikuta
- Journal Title
  
  Robocon Magazine 49
  
  Pages: 122-124
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Development of Surgery Recorder System for Minimally Invasive Surgery2006
- Author(s)
  K.Ikuta, T.Kato, S.Ando, H.Ooe
- Journal Title
  
  IFMBE Proceedings 14
  
  Pages: 2955-2958
- NAID
  110006381540
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Three-dimensional Microfabrication for Biodegradable Polymers Toward Implantable Micro Devices2006
- Author(s)
  Akira Yamada, Fuminori Niikura, Koji Ikuta
- Journal Title
  
  Proc. μTAS' 06 Conference Tokyo
  
  Pages: 684-686
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] The Membrane Micro Emboss (MeME) Process for Fabricating 3-D Microfluidic Device Formed from Thin Polymer Membrane2006
- Author(s)
  Masashi Ikeuchi, Koji Ikuta
- Journal Title
  
  Proc. μTAS'06 Conference Tokyo
  
  Pages: 696-695
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Biochemical IC Technologies for Future Biomedicine2006
- Author(s)
  Koji Ikuta
- Journal Title
  
  Journal of IEICE 89・5
  
  Pages: 411-418
- NAID
  110004735703
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] AIR PRESSURE TYPE MICRO DISPENSER SYSTEM WITHOUT ANY DEAD VOLUME FOR PORTABLE MICRO CHEMICAL DEVICE2006
- Author(s)
  Tadahiro Hasegawa, Fumiyuki Omatsu, Toshiyuki Tsuji, Koji Ikuta
- Journal Title
  
  Proc. μTAS' 06 Conference Tokyo
  
  Pages: 1112-1114
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] ポリマー薄膜を用いた三次元マイクロ流路デバイスの研究-再生医療のための人工毛細血管の開発2006
- Author(s)
  池内真志, 生田幸士
- Journal Title
  
  日本コンピュータ外科学会誌 17・4
  
  Pages: 587-592
- NAID
  10021286894
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Robots in Expo2005 "Micro Finger and Hyper Finger for Remote Micro-surgery"2006
- Author(s)
  Koji Ikuta
- Journal Title
  
  Journal of RSJ. 24・2
  
  Pages: 38-38
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Hydrodynamic Active Catheter with Multi Degrees of Freedom Motion2006
- Author(s)
  K.Ikuta, D.Yajima, H.Ichikawa, K.Suzuki
- Journal Title
  
  IFMBE Proceedings 14
  
  Pages: 2968-2971
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Three-dimensional Microfabrication for Biodegradable Polymers Toward Implantable Micro Devices2006
- Author(s)
  22.Akira Yamada, Fuminori Niikura, Koji Ikuta
- Journal Title
  
  Proc. μTAS' 06 Conference Tokyo
  
  Pages: 684-686
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Fabrication of Polymer Membrane Microchannel by Membrane Micro Embossing (MeME)2005
- Author(s)
  Masashi Ikeuchi, Koji Ikuta
- Journal Title
  
  Molecular Membrane Biology 22
  
  Pages: 519-527
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 一枚の写真2005
- Author(s)
  生田幸士
- Journal Title
  
  O PLUS E 27・5
  
  Pages: 479-480
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] マイクロからナノ手術ロボティクスヘ2005
- Author(s)
  生田幸士
- Journal Title
  
  脳神経外科速報 15
  
  Pages: 1132-1136
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] ナノテクノロジーの医学11 新原理マイクロ・ナノマシンによる未来医療2005
- Author(s)
  生田幸士
- Journal Title
  
  BIO Clinica Vol.20, No.1
  
  Pages: 63-66
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Development of Membrane Micro Embossing (MeME) Process for Self-Supporting Polymer Membrane Microchannel2005
- Author(s)
  Masashi Ikeuchi, Koji Ikuta
- Journal Title
  
  Proc.of 2005 ASME International Mechanical Engineering Congress and Exposition I0736D(DVD-ROM)
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Three-dimensional Microfabrication System for Biodegradable Microdevices with High-resolution and Bio-applicability2005
- Author(s)
  Koji Ikuta, Akira Yamada, Fuminori Niikura
- Journal Title
  
  Proc.of 2005 ASME International Mechanical Engineering Congress and Exposition I0736D(DVD-ROM)
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Fabrication of Polymer Membrane Microchannel by Membrane Micro Embossing (MeME)2005
- Author(s)
  Masashi Ikeuchi, Koji Ikuta
- Journal Title
  
  CD-ROM Proc. of the International Conference on Bio-Nano-Informatics Fusion 2005 1
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Three-dimensional Microfabrication System for Biodegradable Microdevices with High-resolution and Bio-applicability2005
- Author(s)
  Koji Ikuta, Akira Yamada, Fuminori Niikura
- Journal Title
  
  Proc. of 2005 ASME International Mechanical Engineering Congress and Exposition I0736D(DVD-ROM)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Fabrication of Polymer Membrane Microchannel by Membrane Micro Embossing (MeME)2005
- Author(s)
  Masashi Ikeuchi, Koji Ikuta
- Journal Title
  
  Proc.of the International Conference on Bio-Nano-Informatics Fusion 2005 1(CD-ROM)
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Development of the Surgery Recorder System2005
- Author(s)
  Koji Ikuta, Takashi Kato
- Journal Title
  
  Proc.of 2005 ASME International Mechanical Engineering Congress and Exposition I0736D(DVD-ROM)
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Real Three-dimensional Microfabrication for Biodegradable Polymers -Demonstration of microstructures with high-resolution and biocompatibility for implantable microdevices-2005
- Author(s)
  Koji Ikuta, Akira Yamada, Fuminori Niikura
- Journal Title
  
  Proc.of 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) 8(CD-ROM)
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Real Three-dimensional Microfabrication for Biodegradable Polymers-Demonstration of microstructures with high-resolution and biocompatibility for implantable microdevices-2005
- Author(s)
  Koji Ikuta, Akira Yamada, Fuminori Niikura
- Journal Title
  
  CD-ROM Proc. of 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) 8
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] The Surgery Recorder System for Minimally Invasive Surgery -Concept, Prototype and Experimental Evaluation In-Vivo2005
- Author(s)
  Koji Ikuta, Takashi Kato
- Journal Title
  
  6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) (In press)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Study on Three-dimensional Microfluidic Device using Polymer Membrane; Development of an Artificial Blood Capillary Device for Tissue Engineering2005
- Author(s)
  Masashi Ikeuchi, Koji Ikuta
- Journal Title
  
  Journal of JSCAS 17・4
  
  Pages: 587-592
- NAID
  10021286894
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] マイクロからナノ手術ロボティクスへ2005
- Author(s)
  生田幸士
- Journal Title
  
  神経外科速報 15
  
  Pages: 1132-1136
- NAID
  10025682229
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Real Three-dimensional Microfabrication for Biodegradable Polymers-Demonstration of microstructures with high-resolution and biocompatibility for implantable microdevices-2005
- Author(s)
  Koji Ikuta, Akira Yamada, Fuminori Niikura
- Journal Title
  
  Proc. of 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) 8(CD-ROM)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 第6回耳鼻咽喉科ナビゲーション研究会「耳鼻咽喉領域をめざす医療マイクロロボットとバイオナノマシン」2005
- Author(s)
  生田幸士
- Journal Title
  
  耳鼻咽喉科展望 48・6
  
  Pages: 76-83
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Surgery Recorder for Minimally Invasive Surgery2005
- Author(s)
  Koji Ikuta, Takashi Kato
- Journal Title
  
  Proc. of the International Conference on Bio-Nano-Informatics Fusion 2005 1(CD-ROM)
  
  Pages: 4-4
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] The Surgery Recorder System for Minimally Invasive Surgery -Concept, Prototype and Experimental Evaluation In-Vivo2005
- Author(s)
  Koji Ikuta, Takashi Kato, Satoshi Ando, Hiroki Ooe
- Journal Title
  
  Proc. of 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) 8(CD-ROM)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] The fully integrated cell-free protein synthesis system by biochemical IC chip-set2005
- Author(s)
  Koji Ikuta, Tatsuya Ohashi, Kota Ikeda, Atsushi Takahashi, Nobuhiko Satake
- Journal Title
  
  Proc. of 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) 8(CD-ROM)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] The Surgery Recorder System for Minimally Invasive Surgery - Concept, Prototype and Experimental Evaluation In-Vivo2005
- Author(s)
  Koji Ikuta, Takashi Kato
- Journal Title
  
  6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) In press
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] The fully integrated cell-free protein synthesis system by biochemical IC chip-set2005
- Author(s)
  Koji Ikuta, Tatsuya Ohashi, Kota Ikeda, Atsushi Takahashi, Nobuhiko Satake
- Journal Title
  
  Proc.of 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) 8(CD-ROM)
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Development of Membrane Micro Embossing (MeME) Process for Self-Supporting Polymer Membrane Microchannel2005
- Author(s)
  Masashi Ikeuchi, Koji Ikuta
- Journal Title
  
  DVD-ROM Proc. of 2005 ASME International Mechanical Engineering Congress and Exposition I0736D
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] The Photograph2005
- Author(s)
  Koji Ikuta
- Journal Title
  
  O PLUS E 27・5
  
  Pages: 479-480
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Micro to Nano Robotic Surgery2005
- Author(s)
  Koji Ikuta
- Journal Title
  
  Currently Practical Neurosurgery 15
  
  Pages: 1132-1136
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Surgery Recorder for Minimally Invasive Surgery2005
- Author(s)
  Koji Ikuta, Takashi Kato
- Journal Title
  
  Proc.of the International Conference on Bio-Nano-Informatics Fusion 2005 1(CD-ROM)
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Three-dimensional Microfabrication System Toward Advanced Biodegradable Implantable Devices2005
- Author(s)
  Akira Yamada, Fuminori Niikura, Koji Ikuta
- Journal Title
  
  Proc.of 2005 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO '05) 05EX1019C(CD-ROM)
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] The fully integrated cell-free protein synthesis system by biochemical IC chip-set2005
- Author(s)
  Koji Ikuta, Tatsuya Ohashi, Kota Ikeda, Atsushi Takahashi, Nobuhiko Satake
- Journal Title
  
  CD-ROM Proc. of 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) 8
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Surgery Recorder for Minimally Invasive Surgery2005
- Author(s)
  Koji Ikuta, Takashi Kato
- Journal Title
  
  CD-ROM Proc. of the International Conference on Bio-Nano-Informatics Fusion 2005 1
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Medical Micro Robotics and Bio-nano machine for otorhinolaryngology2005
- Author(s)
  Koji Ikuta
- Journal Title
  
  Oto-Rhino-Laryngology 48・6
  
  Pages: 76-83
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Three-dimensional Microfabrication System Toward Advanced Biodegradable Implantable Devices2005
- Author(s)
  Akira Yamada, Fuminori Niikura, Koji Ikuta
- Journal Title
  
  Proc. of 2005 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO '05) 05EX1019C(CD-ROM)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Real Three-dimensional Microfabrication for Biodegradable Polymers -Fabrication of microstructures with high-resolution and biocompatibility for implantable microdevices-2005
- Author(s)
  A.Yamada, F.Niikura, K.Ikuta
- Journal Title
  
  CD-ROM Proc. of the International Conference on Bio-Nano-Informatics Fusion 2005 1
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Real Three-dimensional Microfabrication for Biodegradable Polymers -Demonstration of microstructures with high-resolution and biocompatibility for implantable microdevices-2005
- Author(s)
  Koji Ikuta, Akira Yamada, Fuminori Niikura
- Journal Title
  
  6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) In press
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Development of Free-Surface Microstereolithography with Ultra-High Resolution to Fabricate Hybrid 3-D Microdevices2005
- Author(s)
  Kengo Kobayashi, Koji Ikuta
- Journal Title
  
  Proc. of the 2005 International Symposium on Micro-Nano Mechatronics and Human Science (MHS2005) 05TH8845
  
  Pages: 273-278
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Hydraulic Pressure Drive with Multi-degrees of freedom Motion for Safety Active Catheter2005
- Author(s)
  Koji Ikuta, Hironobu Ichikawa, Daisuke Yajima
- Journal Title
  
  Proc. of the 2005 International Symposium on Micro-Nano Mechatronics and Human Science (MHS2005) 05TH8845
  
  Pages: 279-283
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] The Surgery Recorder System for Minimally Invasive Surgery - Concept, Prototype and Experimental Evaluation In-Vivo2005
- Author(s)
  Koji Ikuta, Takashi Kato, Satoshi Ando, Hiroki Ooe
- Journal Title
  
  CD-ROM Proc. of 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) 8
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Development of Free-Surface Microstereolithography with Ultra-High Resolution to Fabricate Hybrid 3-D Microdevices2005
- Author(s)
  Kengo Kobayashi, Koji Ikuta
- Journal Title
  
  Proc.of the 2005 International Symposium on Micro-Nano Mechatronics and Human Science (MHS2005) 05TH8845
  
  Pages: 273-278
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Real Three-dimensional Micro fabrication for Biodegradable Polymers-Demonstration of microstructures with high-resolution and biocompatibility for implantable microdevices-2005
- Author(s)
  Koji Ikuta, Akira Yamada, Fuminori Niikura
- Journal Title
  
  6th Asian-Pacific Conference on Medical and Biological Engineering(APCMBE) (In press)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Real Three-dimensional Microfabrication for Biodegradable Polymers -Demonstration of microstructures with high-resolution and biocompatibility for implantable microdevices-2005
- Author(s)
  Koji Ikuta, Akira Yamada, Fuminori Niikura
- Journal Title
  
  6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) (In press)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Fabrication of Biodegradable Membrane Micro-channels for Artificial Blood Capillary Networks Using Membrane Micro Embossing (MeME)2005
- Author(s)
  Masashi Ikeuchi, Koji Ikuta
- Journal Title
  
  Trans. JSMBE 43・4
  
  Pages: 646-652
- NAID
  110004704978
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 一枚の写真2005
- Author(s)
  生田幸士
- Journal Title
  
  O PLUSE 27・5
  
  Pages: 479-480
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] ナノテクノロジーの医学11 新原理マイクロ・ナノマシンによる未来医療2005
- Author(s)
  生田幸士
- Journal Title
  
  BIO Clinica 20
  
  Pages: 63-66
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Development of the Surgery Recorder System2005
- Author(s)
  Koji Ikuta, Takashi Kato
- Journal Title
  
  Proc. of 2005 ASME International Mechanical Engineering Congress and Exposition I0736D(DVD-ROM)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Three-dimensional Microfabrication System Toward Advanced Biodegradable Implantable Devices2005
- Author(s)
  Akira Yamada, Fuminori Niikura, Koji Ikuta
- Journal Title
  
  CD-ROM Proc. of 2005 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO '05) 05EX1019C
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Development of the Surgery Recorder System2005
- Author(s)
  Koji Ikuta, Takashi Kato
- Journal Title
  
  DVD-ROM Proc. of 2005 ASME International Mechanical Engineering Congress and Exposition I0736D
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Three-dimensional Microfabrication System for Biodegradable Microdevices with High-resolution and Bio-applicability2005
- Author(s)
  Koji Ikuta, Akira Yamada, Fuminori Niikura
- Journal Title
  
  DVD-ROM Proc. of 2005 ASME International Mechanical Engineering Congress and Exposition I0736D
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] 人工毛細血管のための生分解性薄膜微細流路成型法(MeME)の開発2005
- Author(s)
  池内真志, 生田幸士
- Journal Title
  
  生体医工学 43・4
  
  Pages: 646-652
- NAID
  110004704978
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] The Surgery Recorder System for Minimally Invasive Surgery -Concept, Prototype and Experimental Evaluation In-Vivo2005
- Author(s)
  Koji Ikuta, Takashi Kato, Satoshi Ando, Hiroki Ooe
- Journal Title
  
  Proc.of 6th Asian-Pacific Conference on Medical and Biological Engineering (APCMBE) 8(CD-ROM)
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Development of Membrane Micro Embossing (MeME) Process for Self-Supporting Polymer Membrane Microchannel2005
- Author(s)
  Masashi Ikeuchi, Koji Ikuta
- Journal Title
  
  Proc. of 2005 ASME International Mechanical Engineering Congress and Exposition I0736D(DVD-ROM)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Hydraulic Pressure Drive with Multi-degrees of freedom Motion for Safety Active Catheter2005
- Author(s)
  Koji Ikuta, Hironobu Ichikawa, Daisuke Yajima
- Journal Title
  
  Proc.of the 2005 International Symposium on Micro-Nano Mechatronics and Human Science (MHS2005) 05TH8845
  
  Pages: 279-283
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Research on Artificial Organs Using Novel Micro/Nano Device-Nanomachines fabricated and manipulated with light, and Biochemical IC chips2005
- Author(s)
  Koji Ikuta
- Journal Title
  
  Proc. 43th JSAO
  
  Pages: 13-18
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] Real Three-dimensional Microfabrication for Biodegradable Polymers -Fabrication of microstructures with high-resolution and biocompatibility for implantable microdevices-2005
- Author(s)
  A.Yamada, F.Niikura, K.Ikuta
- Journal Title
  
  Proc.of the International Conference on Bio-Nano-Informatics Fusion 2005 1(CD-ROM)
- Data Source
  KAKENHI-PROJECT-17206023
[Journal Article] The Surgery Recorder System for Minimally Invasive Surgery-Concept, Prototype and Experimental Evaluation In-Vivo2005
- Author(s)
  Koji Ikuta, Takashi Kato
- Journal Title
  
  6th Asian-Pacific Conference on Medical and Biological Engineering(APCMBE) (In press)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 化学ICおよびマイクロ化学デバイスのカップリング手法の開発2004
- Author(s)
  長谷川忠大, 生田幸士
- Journal Title
  
  電気学会論文誌 E部門 Vol.124-E
  
  Pages: 305-310
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 医療を変えるマイクロナノ光造形法と化学ICチップ2004
- Author(s)
  生田幸士
- Journal Title
  
  血管医学 5
  
  Pages: 91-98
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] マイクロナノマシンを用いた先端医療応用2004
- Author(s)
  生田幸士
- Journal Title
  
  月刊新医療 1
  
  Pages: 211-211
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Real Three-dimensional Micro fabrication Process of Biodegradable Polymers for Future Implantable Microdevices2004
- Author(s)
  K.Ikuta, A.Yamada, F.Niikura
- Journal Title
  
  The 1st IEEE Technical Exhibition Based Conference on Robotics and Automation(TExCRA2004)
  
  Pages: 107-108
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Three-dimensional Micro fabrication system for Biodegradable Polymers-Complicated and Non-toxic Microstructures with High-resolution for Implantable Devices-2004
- Author(s)
  K.Ikuta, A.Yamada, F.Niikura
- Journal Title
  
  2004 IEEE International Symposium on Micromechatronics and Human Science(MHS)
  
  Pages: 139-144
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Light-drive biomedical micro tools and biochemical IC chips fabricated by 3D micro/nano stereolithography2004
- Author(s)
  K.Ikuta, S.Maruo, T.Hasegawa, S.Itho, H.Korogi, A.Takahashi
- Journal Title
  
  Proceedings of SPIE, Optic East 2004 1
  
  Pages: 52-66
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Real Three-Dimensional Microfabrication for Biodegradable Polymers -Demonstration of High-Resolution and Biocompatibility for Implantable Microdevices-2004
- Author(s)
  K.Ikuta, A.Yamada, F.Niikura
- Journal Title
  
  The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS04) 1
  
  Pages: 2679-2682
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Medical Device for the 21st Century Innovation-Under Development2004
- Author(s)
  K.Ikuta
- Journal Title
  
  ME Promotion Society Vol.1
  
  Pages: 192-192
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 生分解樹脂用3次元マイクロファブリケーションの開発2004
- Author(s)
  生田幸士, 山田章, 新倉史智
- Journal Title
  
  生体医工学 41
  
  Pages: 458-465
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 三次元微細加工で作製された生分解マイクロ構造の機械特性評価2004
- Author(s)
  山田章, 新倉史智, 生田幸士
- Journal Title
  
  日本コンピュータ外科学会誌 5
  
  Pages: 429-433
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Development of Novel Coupling Method for Biochemical IC Family and Micro Chemical Devices2004
- Author(s)
  Tadahiro Hasegawa, Koji Ikuta
- Journal Title
  
  IEEJ Trans.SM Vol.124, No.9
  
  Pages: 305-310
- NAID
  10013538154
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Real Three-Dimensional Micro fabrication for Biodegradable Polymers-Demonstration of High-Resolution and Biocompatibility for Implantable Microdevices-2004
- Author(s)
  K.Ikuta, A.Yamada, F.Niikura
- Journal Title
  
  The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society(EMBS04)
  
  Pages: 2679-2682
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Advanced Medical Application Using Micro/Nanomachine2004
- Author(s)
  K.Ikuta
- Journal Title
  
  New Medicine Vol.1
  
  Pages: 211-211
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] バイオ医療をめざすマイクロナノマシンの動向2004
- Author(s)
  生田幸士
- Journal Title
  
  日本耳鼻咽喉科学会,専門医通信 79
  
  Pages: 18-19
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Light-drive biomedical micro tools and biochemical IC chips fabricated by 3D micro/nano stereolithography2004
- Author(s)
  K.Ikuta, S.Maruo, T.Hasegawa, S.Itho, H.Korogi, A.Takahashi
- Journal Title
  
  Proceedings of SPIE, Optic East
  
  Pages: 52-66
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 化学ICおよびマイクロ化学デバイスのカップリング手法の開発2004
- Author(s)
  長谷川忠大, 生田幸士
- Journal Title
  
  電気学会論文誌 E部門 124-E
  
  Pages: 305-310
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Trend in Micro/Nanomachine Technology for Biomedicine2004
- Author(s)
  K.Ikuta
- Journal Title
  
  The Oto-Rhino-Laryngological Society of Japan Vol.79
  
  Pages: 18-19
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Real Three-dimensional Microfabrication Process of Biodegradable Polymers for Future Implantable Microdevices2004
- Author(s)
  K.Ikuta, A.Yamada, F.Niikura
- Journal Title
  
  The 1st IEEE Technical Exhibition Based Conference on Robotics and Automation (TExCRA2004) 1
  
  Pages: 107-108
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 三次元微細加工で作製された生分解マイクロ構造の機械特性評価2004
- Author(s)
  山田章, 新倉史智, 生田幸士
- Journal Title
  
  日本コンピュータ外科学会誌 Vol.5, No.4
  
  Pages: 429-433
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Future Medicine Using Micro/Nanomachine2004
- Author(s)
  K.Ikuta
- Journal Title
  
  Japan Medical Journal Vol.1
  
  Pages: 178-178
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 医療を変えるマイクロナノ光造形法と化学ICチップ2004
- Author(s)
  生田幸士
- Journal Title
  
  血管医学 Vol.5, No.2
  
  Pages: 91-98
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Light-drive biomedical micro tools and biochemical IC chips fabricated by 3D micro/nano stereolithography2004
- Author(s)
  K.Ikuta, S.Maruo, T.Hasetawa, S.Itho, H.Korogi, A.Takahashi
- Journal Title
  
  Proceedings of SPIE, Optic East 2004 1
  
  Pages: 52-66
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] マイクロナノマシン技術を用いた未来医療2004
- Author(s)
  生田幸士
- Journal Title
  
  週刊日本医事新報,医事新報社 1
  
  Pages: 178-178
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 21世紀を拓く医療機器-ただ今開発中2004
- Author(s)
  生田幸士
- Journal Title
  
  新医療,エムイー振興協会 1
  
  Pages: 192-192
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 10-way Micro Switching Valve Chip with Rotary Mechanism for Multi-directional Flow Control2003
- Author(s)
  T.Hasegawa, K.Ikuta, K.Nakashima
- Journal Title
  
  The Seventh International Symposium on Micro Total Analysis System(micro-TAS 2003)
  
  Pages: 215-218
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Biochemical IC chips for pretreatment in biochemical experiments2003
- Author(s)
  K.Ikuta, Y.Sasaki, H.Masegawa, S.Maruo
- Journal Title
  
  Proceedings of the 15th IEEE International Conference on Micro Electro Mechanical Systems(MEMS03)
  
  Pages: 343-346
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Safety Active Catheter with Multiple-segments Driven by Innovative Hydro-Pressure Micro Actuators2003
- Author(s)
  Koji Ikuta, Hironobu Ichikawa, Katuya Suzuki, Takahiro Yamamoto
- Journal Title
  
  Proceedings of the 15th IEEE International Conference on Micro Electro Mechanical Systems(MEMS03)
  
  Pages: 130-135
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Minimally Invasive Surgery using Micro/Nano Robotics, Japan Society for Endoscopic Surgery2003
- Author(s)
  K.Ikuta
- Journal Title
  
  Naishikyougeka Vol.8, No.1
  
  Pages: 36-40
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] サージェリレコーディングシステムの提案と試作2003
- Author(s)
  生田幸士, 加藤大香士, 吉山博章
- Journal Title
  
  日本コンピュータ外科学会誌 4
  
  Pages: 67-74
- NAID
  10025681104
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Micro Hydrodynamic Actuated Multiple Segments Catheter for Safety Minimally Invasive Therapy2003
- Author(s)
  Koji Ikuta, Hironobu Ichikawa, Katuya Suzuki, Takahiro Yamamoto
- Journal Title
  
  Proceeding of the 2003 IEEE International Conference on Robotics & Automation 1
  
  Pages: 2640-2645
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] マイクロシステムと未来医療2003
- Author(s)
  生田幸士
- Journal Title
  
  現代医療 Vol.35, No.3
  
  Pages: 78-85
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Force-Controllable, Optically Driven Micromachines Fabricated by Single-Step Two-Photon Microstereolithography2003
- Author(s)
  Shoji Maruo, Koji Ikuta, Hayato Korogi
- Journal Title
  
  Journal of Microelectromechanical Systems 12
  
  Pages: 533-539
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Hyper Redundant Miniature Manipulator "Hyper Finger" for Remote Minimally Invasive Surgery in Deep Area2003
- Author(s)
  Koji Ikuta, Takahiko Hasegawa, Shinichi Daifu
- Journal Title
  
  Proceeding of the 2003 IEEE International Conference on Robotics & Automation
  
  Pages: 1098-1102
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] マイクロナノロボティクスを用いた低侵襲医療2003
- Author(s)
  生田幸士
- Journal Title
  
  日本内視鏡外科学会誌 8
  
  Pages: 36-40
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 指でつまめる反応装置-マイクロチップ2003
- Author(s)
  生田幸士
- Journal Title
  
  地球と生きる「緑の化学」 195
  
  Pages: 48-53
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Safety Active Catheter with Multiple-segments Driven by Innovative Hydro-Pressure Micro Actuators2003
- Author(s)
  Koji Ikuta, Hironobu Ichikawa, Katuya Suzuki, Takahiro Yamamoto
- Journal Title
  
  Proceedings of the 15th IEEE International Conference on Micro Electro Mechanical Systems (MEMS03) 1
  
  Pages: 130-135
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Safety Evaluation Method of Design and Control for Human-Care Robots2003
- Author(s)
  Koji Ikuta, Hideki Ishii, Makoto Nokata
- Journal Title
  
  The International Journal of Robotics Research 22
  
  Pages: 281-297
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 新しい領域(人工細胞デバイスの開発,生体医療マイクロシステム)2003
- Author(s)
  生田幸士
- Journal Title
  
  animus 1
  
  Pages: 158-158
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Hyper Redundant Miniature Manipulator "Hyper Finger" for Remote Minimally Invasive Surgery in Deep Area2003
- Author(s)
  Koji Ikuta, Takahiko Hasegawa, Shinichi Daifu
- Journal Title
  
  Proceeding of the 2003 IEEE International Conference on Robotics & Automation 1
  
  Pages: 1098-1102
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 生分解樹脂用3次元マイクロファブリケーションの開発2003
- Author(s)
  生田幸士, 山田章, 新倉史智
- Journal Title
  
  生体医工学 41巻4号
  
  Pages: 458-465
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] サージェリレコーディングシステムの提案と試作2003
- Author(s)
  生田幸士, 加藤大香士, 吉山博章
- Journal Title
  
  日本コンピュータ外科学会誌 Vol.4, No.2
  
  Pages: 67-74
- NAID
  10025681104
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] マイクロナノロボティクスを用いた低侵襲医療2003
- Author(s)
  生田幸士
- Journal Title
  
  日本内視鏡外科学会誌 Vol.8 NO.1
  
  Pages: 36-40
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] マイクロ・ナノ光造形法を用いた光駆動マイクロマシンと化学ICチップ2003
- Author(s)
  生田幸士
- Journal Title
  
  高分子学会誌 52
  
  Pages: 466-471
- NAID
  10011203873
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 21世紀の新しい医療を生み出すマイクロマシンの世界へようこそ!2003
- Author(s)
  生田幸士
- Journal Title
  
  Design Mews 261
  
  Pages: 86-89
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Fully-integrated micro biochemical laboratory using biochemical IC chips2003
- Author(s)
  K.Ikuta, A.Takahashi, K.Ikeda, S.Maruo
- Journal Title
  
  Proceedings of the 15th IEEE International Conference on Micro Electro Mechanical Systems (MEMS03) 1
  
  Pages: 451-454
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Three-dimensional Micro fabrication for Biodegradable Materials2003
- Author(s)
  Koji Ikuta, Akira Yamada, Fuminori Niikura
- Journal Title
  
  Seitaiikougaku Vol.41, No.2
  
  Pages: 458-465
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] マイクロシステムと未来医療2003
- Author(s)
  生田幸士
- Journal Title
  
  現代医療 35
  
  Pages: 78-85
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Proposal of the Surgery Recording System2003
- Author(s)
  Koji Ikuta, Takashi Kato, Hiroaki Yoshiyama
- Journal Title
  
  JJSCAS Vol.4, No.2
  
  Pages: 67-74
- NAID
  10025681104
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Development of Remote Microsurgery Robot and New Surgical Procedure for Deep and Narrow Space2003
- Author(s)
  Koji Ikuta, Keiichi Yamamoto, Keiji Sasaki
- Journal Title
  
  Proceeding of the 2003 IEEE International Conference on Robotics & Automation 1
  
  Pages: 1103-1108
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Chemical IC2003
- Author(s)
  K.Ikuta, et al.
- Journal Title
  
  Dictionary of the Nanotechnology(Kogyo Chosakai Publishing inc.)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Three-dimensional Microfabrication system for Biodegradable Polymers -Complicated and Non-toxic Microstructures with High-resolution for Implantable Devices-2003
- Author(s)
  K.Ikuta, A.Yamada, F.Niikura
- Journal Title
  
  2004 IEEE International Symposium on Micromechatronics and Human Science (MHS) 1
  
  Pages: 139-144
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Safety Evaluation Method of Design and Control for Human-Care Robots2003
- Author(s)
  Koji Ikuta, Hideki Ishii, Makoto Nokata
- Journal Title
  
  The International Journal of Robotics Research Vol.22, No.5
  
  Pages: 281-297
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Photo-actuated Micromachine and Chemical IC fabricated by Micro/Nano Stereo Lithography, High Polymers2003
- Author(s)
  K.Ikuta
- Journal Title
  
  Koubunshi Vol.52, No.7
  
  Pages: 466-471
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Fully-integrated micro biochemical laboratory using biochemical IC chips2003
- Author(s)
  K.Ikuta, A.Takahashi, K.Ikeda, S.Maruo
- Journal Title
  
  Proceedings of the 15th IEEE International Conference on Micro Electro Mechanical Systems(MEMS03)
  
  Pages: 451-454
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 新しい領域(人工細胞デバイスの開発,生体医療マイクロシステム)2003
- Author(s)
  生田幸士
- Journal Title
  
  Animus 1
  
  Pages: 158-158
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] 10-way Micro Switching Valve Chip with Rotary Mechanism for Multi-directional Flow Control2003
- Author(s)
  T.Hasegawa, K.Ikuta, K.Nakashima
- Journal Title
  
  The Seventh International Symposium on Micro Total Analysis System (micro-TAS 2003) 1
  
  Pages: 215-218
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Biochemical IC chips for pretreatment in biochemical experiments2003
- Author(s)
  K.Ikuta, Y.Sasaki, H.Masegawa, S.Maruo
- Journal Title
  
  Proceedings of the 15th IEEE International Conference on Micro Electro Mechanical Systems (MEMS03) 1
  
  Pages: 343-346
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Three-dimensional Nanoengineered Assemblies2003
- Author(s)
  K.Ikuta, et al.
- Journal Title
  
  Material Research Society
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Development of Remote Microsurgery Robot and New Surgical Procedure for Deep and Narrow Space2003
- Author(s)
  Koji Ikuta, Keiichi Yamamoto, Keiji Sasaki
- Journal Title
  
  Proceeding of the 2003 IEEE International Conference on Robotics & Automation
  
  Pages: 1103-1108
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Submicron manipulation tools driven by light in a liquid2003
- Author(s)
  Shoji Maruo, Koji Ikuta, Hayato Korogi
- Journal Title
  
  Applied Physics Letters 82
  
  Pages: 133-135
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Microsystem and Future Medicine2003
- Author(s)
  K.Ikuta
- Journal Title
  
  Modern Medicine Vol.35, No.3
  
  Pages: 78-85
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Submicron manipulation tools driven by light in a liquid2003
- Author(s)
  Shoji Maruo, Koji Ikuta, Hayato Korogi
- Journal Title
  
  Applied Physics Letters Vol.82, No.1
  
  Pages: 133-135
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Overview of the micromachine technology2003
- Author(s)
  K.Ikuta, et al.
- Journal Title
  
  (Sangyo Gijyutsu Service Center)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Welcome to the Micromachine World-Creating New Medical Technology for the 21st Century2003
- Author(s)
  K.Ikuta
- Journal Title
  
  Design News Vol.261
  
  Pages: 86-89
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Micro Hydrodynamic Actuated Multiple Segments Catheter for Safety Minimally Invasive Therapy2003
- Author(s)
  Koji Ikuta, Hironobu Ichikawa, Katuya Suzuki, Takahiro Yamamoto
- Journal Title
  
  Proceeding of the 2003 IEEE International Conference on Robotics & Automation
  
  Pages: 2640-2645
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Frontier (Development of the Artificial Cell Device, Biomedical Micro System)2003
- Author(s)
  K.Ikuta
- Journal Title
  
  Animus Vol.1
  
  Pages: 158-158
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Application of the Micro Stereo Lithography to Medical Devices and Chemical IC2003
- Author(s)
  K.Ikuta, et al.
- Journal Title
  
  Microfabrication Technology (Application)-Application for Photonics, Electronics and Mechatronics(NTS) (In press)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Force-Controllable, Optically Driven Micromachines Fabricated by Single-Step Two-Photon Microstereolithography2003
- Author(s)
  Shoji Maruo, Koji Ikuta, Hayato Korogi
- Journal Title
  
  Journal of Microelectromechanical Systems Vol.12, No.5
  
  Pages: 533-539
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] マイクロ・ナノ光造形法を用いた光駆動マイクロマシンと化学ICチップ2003
- Author(s)
  生田幸士
- Journal Title
  
  高分子学会誌 Vol.52, No.7
  
  Pages: 466-471
- NAID
  10011203873
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] Microchip-Micro Reactor on Fingertip2003
- Author(s)
  K.Ikuta
- Journal Title
  
  Green Chemistry for Symbiosis with Earth Vol.195
  
  Pages: 48-53
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Journal Article] The Mechanical Properties of Biodegradable Microstructures Fabricated by Three-dimensional Micro fabrication2003
- Author(s)
  Akira Yamada, Fuminori Niikura, Koji Ikuta
- Journal Title
  
  JJSCAS Vol.5, No.4
  
  Pages: 428-432
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Patent] 細胞培養装置およびこれを備える細胞培養試験観察システム2014
- Inventor(s)
  池内真志，生田幸士，安川あかね
- Industrial Property Rights Holder
  東京大学
- Industrial Property Rights Type
  特許
- Filing Date
  2014-07-24
- Data Source
  KAKENHI-PROJECT-22220008
[Patent] ３次元共焦点観察用装置及び観察焦点面変位・補正ユニット2010
- Inventor(s)
  生田幸士，池内真志
- Industrial Property Rights Holder
  科学技術振興機構
- Industrial Property Rights Type
  特許
- Filing Date
  2010-09-17
- Acquisition Date
  2013-03-15
- Data Source
  KAKENHI-PROJECT-22220008
[Patent] 医療用3次元構造物、その製造方法及び製造装置2004
- Inventor(s)
  生田幸士, 山田章
- Industrial Property Rights Holder
  独立行政法人科学捜術振興
- Filing Date
  2004-09-02
- Data Source
  KAKENHI-PROJECT-15206027
[Patent] 医療用3次元構造物、その製造方法及び製造装置2004
- Inventor(s)
  生田幸士, 山田章
- Industrial Property Rights Holder
  独立行政法人科学技術振興機構
- Filing Date
  2004-09-02
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Patent] 医療用3次元構造物、その製造方法及び製造装置2004
- Inventor(s)
  生田幸士, 山田章
- Industrial Property Rights Holder
  科学技術振興事業団
- Patent Publication Number
  2004-058782
- Filing Date
  2004-03-03
- Data Source
  KAKENHI-PROJECT-15206027
[Patent] 医療用3次元構造物、その製造方法及び製造装置2004
- Inventor(s)
  生田幸士, 山田章
- Industrial Property Rights Holder
  科学技術振興事業団
- Patent Publication Number
  2004-058782
- Filing Date
  2004-03-03
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206027
[Presentation] Point of Care Testing Chip for Multiple Virus Infection Detection Using LAMP2019
- Author(s)
  Yusuke Kimura, Masashi Ikeuchi, Yoshinori Inoue Koji Ikuta
- Organizer
  IEEE MEMS2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] Network Connected Micro Bio-robotics for Super Early Detection of Cancer2018
- Author(s)
  Koji Ikuta
- Organizer
  The first International Symposium on Bio- and Socio-inspired Networked Robotics
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] Independent actuation and master-slave control of multiple micro magnetic actuators2018
- Author(s)
  T. Kawaguchi, Y. Inoue, M. Ikeuchi, Koji Ikuta
- Organizer
  IEEE Micro Electro Mechanical Systems (MEMS2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] 早期ウィルス感染症検知マイクロデバイスの開発2018
- Author(s)
  木村雄亮、池内真志、井上佳則、生田幸士
- Organizer
  第57回日本生体医工学会大会
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] MNC20182018
- Author(s)
  Koji Ikuta
- Organizer
  Optically Driven Nano-Robots and Chemical IC Chip for Micro-RNA Detection and Tissue Engineering Based on 3D Micro/Nano Fabrication
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] Optically-driven Nano Robotics and Chemical IC Chips by 3D Micro/Nano Fabrication2018
- Author(s)
  Koji Ikuta
- Organizer
  Workshop on Medical Robotics, Shanghai, China,
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] 水圧能動カテーテルの先端接触推定2018
- Author(s)
  井上佳則　生田幸士
- Organizer
  第27回日本コンピュータ外科学会大会
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] LAMP法による早期感染症発見用マイクロデバイスの開発2018
- Author(s)
  木村雄亮、池内真志、井上佳則、生田幸士
- Organizer
  第27回日本コンピュータ外科学会大会
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] LAMP法によるウィルス遺伝子検出用化学ICチップの開発2018
- Author(s)
  木村雄亮、池内真志、井上佳則、生田幸士
- Organizer
  第36回日本ロボット学会学術講演会
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] 医療費削減と健康寿命延長に貢献する新概念マイクロナノマシン・ロボティクス2018
- Author(s)
  生田幸士
- Organizer
  第２２回KECテクノフォーラム
- Invited
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] 3D Micro/nano Fabrication and Theoretical Analysis for Advancing Micro Robotics2017
- Author(s)
  Koji Ikuta
- Organizer
  Hamlyn Symposium, Workshop on Micro Robotics and Micro Fabrication
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] 培養デバイス TASCL を用いたヒト脂肪様細胞組織体の創製2017
- Author(s)
  宮本義孝、池内真志、野口洋文、鈴木聡、八木透、生田幸士、林衆治
- Organizer
  シンポジウム：細胞アッセイ技術の現状と将来
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] Innovative Soft Robotic Micro Devices for Future Medicine2017
- Author(s)
  Koji Ikuta
- Organizer
  Hamlyn Symposium, Workshop on Soft Robotics Across Scale
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] 三次元培養によるヒト脂肪由来幹細胞からマイクロティッシュの作製2017
- Author(s)
  宮本義孝、池内真志、野口洋文、八木透、生田幸士、林衆治
- Organizer
  第16回日本再生医療学会総会
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] MicroRNA発現解析用マイクロデバイスの開発2017
- Author(s)
  木村雄亮、池内真志、生田幸士
- Organizer
  第56回日本生体医工学会大会
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] Micro/nano Robotics for Future Medicine2017
- Author(s)
  Koji Ikuta
- Organizer
  2nd NRW-Fukushima Joint Symposium on Advanced Medicine
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] 新原理生体埋め込みマイクロアクチュエータ2017
- Author(s)
  佐藤宏，井上佳則，生田幸士
- Organizer
  第26回日本コンピュータ外科学会大会
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] 水圧能動カテーテルの先端角度計測手法開発2017
- Author(s)
  井上佳則，生田幸士
- Organizer
  第26回日本コンピュータ外科学会大会
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] World's first bio-degradable actuator for removal-free implantable MEMS2017
- Author(s)
  Hiroshi Sato, Yoshinori Inoue, Masashi Ikeuchi and Koji Ikuta
- Organizer
  2017 IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] Independently controllable microwell array with fluidic multiplexer for mass production of embryonic bodies2017
- Author(s)
  M. Ikeuchi, M. Shibata, K. Ikuta
- Organizer
  19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] Finger-tip Size Quantitative Real-time PCR Device for Early Detection of Cancer, 2nd Report: Detection of Cancer Specific MicroRNA2016
- Author(s)
  Y Kimura, M Ikeuchi, K Ikuta
- Organizer
  29th International Microprocesses and Nanotechnology Conference (MNC 2016)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] がん早期発見を可能とする、RNA発現解析用マイクロデバイスの開発2016
- Author(s)
  木村雄亮, 池内真志, 生田幸士
- Organizer
  第55回日本生体医工学会大会
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] 3次元培養によるヒト脂肪由来幹細胞の脂肪への分化とマイクロティッシュの作製2016
- Author(s)
  宮本義孝、池内真志、野口洋文、八木透、生田幸士、林衆治
- Organizer
  第68回日本生物工学会大会
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] ヒト脂肪由来幹細胞からマイクロティッシュの大量作製2016
- Author(s)
  宮本義孝、池内真志、野口洋文、八木透、生田幸士、林衆治
- Organizer
  第52回日本移植学会総会
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] The development of real-time PCR micro device with optical sensor for early detection of cancer2016
- Author(s)
  Yusuke Kimura, Keigo Osada, Yoshinori Inoue, Masashi Ikeuchi, and Koji Ikuta
- Organizer
  The 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’16)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] qRT-PCR用化学ICチップによる疾患早期発見デバイスの構築　(第２報) ナノリットルサンプルによる複数同時検出の実証2016
- Author(s)
  木村雄亮, 池内真志, 生田幸士
- Organizer
  日本機械学会ロボティクス・メカトロニクス講演会2016
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] MicroRNA Analysis 3D Chemical IC Chips for Early Detection of Cancer2016
- Author(s)
  木村雄亮, 池内真志, 生田幸士
- Organizer
  The 13th IEEE TOWERS
- Data Source
  KAKENHI-PROJECT-16H02094
[Presentation] Nano-Scale Biomechanical Analyzer for Studying Stimulus Dependent Self-Assembly of Actin Filament2014
- Author(s)
  N. Shimada, M.Ikeuchi, K. Ikuta
- Organizer
  IEEE MEMS
- Place of Presentation
  サンフランシスコ，米国
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Micro/nano Robotics and Automation for Biomedicine and Tissue Engineering2014
- Author(s)
  Koji Ikuta
- Organizer
  2014 International Symposium on Convergence Technologies
- Place of Presentation
  The Advanced Institutes of Convergence Technology, Korea
- Year and Date
  2014-11-28
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Mass-Production and Prolonged Undifferentiated State of Embryonic Bodies by Using A Semipermeable Tapered Microwell Array2014
- Author(s)
  M. Ikeuchi, S. Hayashi, M. Osonoi, K. Ikuta
- Organizer
  IEEE MEMS
- Place of Presentation
  サンフランシスコ，米国
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Integrated Micro Culture Device for Fully Automated Closed Culture Experiment of Embryonic Body2014
- Author(s)
  A. Yasukawa, T. Nishijima, M. Ikeuchi, K. Ikuta
- Organizer
  IEEE MEMS
- Place of Presentation
  サンフランシスコ，米国
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 新原理マイクロナノマシン，ロボットによる未来医療2013
- Author(s)
  生田幸士
- Organizer
  第15回日本褥瘡学会学術集会
- Place of Presentation
  神戸
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 医用マイクロマシン、ナノマシンを利用した未来医療2013
- Author(s)
  生田幸士
- Organizer
  第49回日本腹部救急医学会総会
- Place of Presentation
  福岡国際会議場
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Combinatorial Differentiation Induction of Embrionic Bodies in PASCL (Pneumatically Actuated Spheroids Culture Lab-On-Chip)2013
- Author(s)
  A Yasukawa, M Ikeuchi, K Ikuta
- Organizer
  IEEE MEMS 2013
- Place of Presentation
  Taipei,Taiwan
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Sealless 3-D Microfluidic Channel Fabrication by Sacrificial Caramel Template Direct-Patterning2013
- Author(s)
  Y Koyata, M Ikeuchi, K Ikuta
- Organizer
  IEEE MEMS 2013
- Place of Presentation
  Taipei,Taiwan
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 新概念マイクロマシンは未来医療を拓けるか？2013
- Author(s)
  生田幸士
- Organizer
  MICCAI 2013
- Place of Presentation
  名古屋大学
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] High Speed 3D Tracking System for Optically Driven Micro-Robot with a Single CCD by Truncated Cone-Shaped Marker Triplets2013
- Author(s)
  N. Shimada, K. Asano, M.Ikeuchi, K. Ikuta
- Organizer
  IEEE EMBS
- Place of Presentation
  大阪
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 3-D General Photocurable Model of Resin with Various Kinds of Microparticles2013
- Author(s)
  M Yasui, K Ikuta
- Organizer
  IEEE MEMS 2013
- Place of Presentation
  Taipei,Taiwan
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Cylindrical PDMS Microchannel Fabrication by Sacrificial Molding Using Caramel2013
- Author(s)
  Y. Koyata, M. Ikeuchi, K. Ikuta
- Organizer
  IEEE EMBS
- Place of Presentation
  大阪
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Fabrication and Differentiation of Embryonic Bodies in “PASCL (Pneumatically Actuated Spheroid Culturing Lab-On-A-Chip)”2013
- Author(s)
  A. Yasukawa, T. Nishijima, M. Ikeuchi, K. Ikuta
- Organizer
  IEEE EMBS
- Place of Presentation
  大阪
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 変貌する身体観―現実がSFを超える時―2013
- Author(s)
  生田幸士
- Organizer
  第17回日本統合医療学会
- Place of Presentation
  日本赤十字看護大学
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Polymer-based Nano Robot and Tissue Engineering Devices by 3D Micro/nano Fabrication2012
- Author(s)
  Koji Ikuta
- Organizer
  TBIS 2012
- Place of Presentation
  信州大学
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Optical-driven Nano Robot and Tissue Engineering Devices by 3D Micro/Nano Fabrication Processes2012
- Author(s)
  Koji Ikuta
- Organizer
  7th International Conference on MicroManufacturing
- Place of Presentation
  Northwestern University, IL, USA
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Magnetic micro actuator with neutral buoyancy and 3D fabrication of cell size magnetized structure2012
- Author(s)
  M Yasui, M Ikeuchi, K Ikuta
- Organizer
  IEEE ICRA 2012
- Place of Presentation
  St.Paul, U.S.A.
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Pneumatically Actuated Spheroid Culturing Lab-On-A-Chip for Combinatorial Analysis of Embryonic Body2012
- Author(s)
  Takuya Nishijima, Masashi Ikeuchi, Koji Ikuta
- Organizer
  The 25th International Conference on Micro Electro Mechanical Systems
- Place of Presentation
  Paris, France
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] NANOSCALE DYNAMIC VISCOELASTICITY ANALYZER BY USING OPTICALLY DRIVEN NANOBEAMS FOR STUDY OF BIOMOLECULES2012
- Author(s)
  Naoya Shimada, Kennichi Kadoguchi, Masashi Ikeuchi, Koji Ikuta
- Organizer
  The 25th International Conference on Micro Electro Mechanical Systems
- Place of Presentation
  Paris, France
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Biomedical Robotic Device Based on 3D Polymer-Based Micro/Nano Fabrication2012
- Author(s)
  Koji Ikuta
- Organizer
  3M-NANO 2012
- Place of Presentation
  Xian, China
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Development of Microfluidic Contact Printing Using Membrane Microchannel Technology for Cell Patterning2012
- Author(s)
  Masashi Ikeuchi, Masato Nakazono, Koji Ikuta
- Organizer
  The 25th International Conference on Micro Electro Mechanical Systems
- Place of Presentation
  Paris, France
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Multifunctional optically driven microrobot for realtime 3D bio-manipulation and imaging2011
- Author(s)
  M.Ikeuchi, K.Isozaki, K.Kyue, N.Shimada, H.Sasago, K.Ikuta
- Organizer
  IEEE Conference on MIcro Electro Mechanical Systems (MEMS 2011)
- Place of Presentation
  Cancun, Mexico
- Year and Date
  2011-01-23
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Multi-layer signal encoded tissue culture device formed of nano-fibrous microcapsules2011
- Author(s)
  R.Tane, M.Ikeuchi, K.Ikuta
- Organizer
  IEEE Conference on MIcro Electro Mechanical Systems (MEMS 2011)
- Place of Presentation
  Cancun, Mexico
- Year and Date
  2011-01-23
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] MOBILE MICRO SCREW PUMP WITH FLOW SENSING CAPABILITY FOR ONSITE FLOW CONTROL IN MICROCHANNEL DEVICE2011
- Author(s)
  S.Nakamoto, K.Kobayashi, M.Ikeuchi, K.Ikuta
- Organizer
  IEEE Conference on MIcro Electro Mechanical Systems (MEMS 2011)
- Place of Presentation
  Cancun, Mexico
- Year and Date
  2011-01-23
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] The development of a novel cell culture scaffold composed of highly uniform nanofibrous microcapsules2011
- Author(s)
  R.Tane, M.Ikeuchi, M.Fukuoka, K.Ikuta
- Organizer
  The 6th International Conference on MicroManufacturing
- Place of Presentation
  東京
- Year and Date
  2011-03-09
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Optically-driven Nano Robot for Advanced Micro Biomedicine2011
- Author(s)
  Koji Ikuta
- Organizer
  24th International Microprocesses and Nanotechnology Conference
- Place of Presentation
  Kyoto
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] High Temperature Post bake Process to Reduce Cytocommpatibility of Photo Curable resin for Microstereolithography2011
- Author(s)
  Y.Inoue, K.Ikuta
- Organizer
  Internatonal Symposium on Biomimetic Materials Processing (BMMP-11)
- Place of Presentation
  名古屋
- Year and Date
  2011-01-25
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 3D CULTURE OF PANCREATIC STEM CELLS USING TAPERED STENCIL FOR CLUSTER CULTURE (TASCL)2011
- Author(s)
  Masashi Ikeuchi, Koichi Oishi, Hirofumi Noguchi, Shuji Hayashi, Koji Ikuta
- Organizer
  6th International Conference on Microtechnologies in Medicine and Biology
- Place of Presentation
  Lucern, Switzerland
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Hydraulically Driven Active Catheter with High Safety and Controllability2011
- Author(s)
  D.Yajima, K.Ikuta
- Organizer
  Internatonal Symposium on Biomimetic Materials Processing (BMMP-11)
- Place of Presentation
  名古屋
- Year and Date
  2011-01-25
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] New University for Biomedical Engineering Education2010
- Author(s)
  生田幸士
- Organizer
  第49回日本生体医工学会大会
- Place of Presentation
  大阪
- Year and Date
  2010-06-25
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 腹腔鏡手術用体内組立式多自由度ツールの開発2010
- Author(s)
  廣田和明, 浜島彰徳, 加藤大香士, 生田幸士
- Organizer
  日本機械学会ロボティクス・メカトロニクス講演会
- Place of Presentation
  旭川
- Year and Date
  2010-06-16
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Development of Glass Reactor for Real-time PCR Chemical IC2010
- Author(s)
  牧野令士, 笹生恵大, 岩島研, 池内真志, 生田幸士
- Organizer
  第28回日本ロボット学会学術講演会
- Place of Presentation
  名古屋
- Year and Date
  2010-09-24
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] The Development of a 3-D Scaffold Formed of Electrosprayed Nano-Fibrous Microcapsules2010
- Author(s)
  R.Tane, M.Ikeuchi, M.Fukuoka, K.Ikuta
- Organizer
  International Symposium on Micro-NanoMechatronics and Human Science
- Place of Presentation
  名古屋
- Year and Date
  2010-11-09
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 生分解ナノメッシュカプセルによる再生医療用担体の開発2010
- Author(s)
  種良典, 池内真志, 福岡宗明, 生田幸士
- Organizer
  第19回日本コンピュータ外科学会大会
- Place of Presentation
  福岡
- Year and Date
  2010-11-04
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 磁性微粒子を含む光硬化性樹脂の光硬化性モデル2010
- Author(s)
  安井真人, 生田幸士
- Organizer
  第19回日本コンピュータ外科学会大会
- Place of Presentation
  福岡
- Year and Date
  2010-11-04
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Creative Education Process via Designer Education2010
- Author(s)
  生田幸士
- Organizer
  第49回日本生体医工学会大会
- Place of Presentation
  大阪
- Year and Date
  2010-06-25
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 光駆動マイクロマシン用3次元操作・観察システムの開発2010
- Author(s)
  池内真志, 砂辺光, 笹子宏司, 生田幸士
- Organizer
  第28回日本ロボット学会学術講演会
- Place of Presentation
  名古屋
- Year and Date
  2010-09-24
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Total tactics for realizing clinical application in medical robotics2010
- Author(s)
  生田幸士
- Organizer
  第49回日本生体医工学会大会
- Place of Presentation
  大阪
- Year and Date
  2010-06-25
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Pressure pulse driven method for precise bending angle control of hydraulic active catheter2010
- Author(s)
  K.Ikuta, Y.Matsuda, D.Yajima, Y.Ohta
- Organizer
  The 3rd IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics
- Place of Presentation
  東京
- Year and Date
  2010-09-27
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 細胞操作用高機能光駆動ナノマシンの開発2010
- Author(s)
  池内真志, 磯崎賢, 角口健一, 久恵一宏, 嶋田直矢, 生田幸士
- Organizer
  第49回日本生体医工学会大会
- Place of Presentation
  大阪
- Year and Date
  2010-06-26
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] ガラス製リアクタを用いたリアルタイムPCR化学ICの開発2010
- Author(s)
  牧野令士, 笹尾恵大, 岩島研, 池内真志, 生田幸士
- Organizer
  日本機械学会ロボティクス・メカトロニクス講演会
- Place of Presentation
  旭川
- Year and Date
  2010-06-16
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Development of the internally reconstructable system for laparoscopic surgery2010
- Author(s)
  廣田和明, 加藤大香士, 浜島彰徳, 生田幸士
- Organizer
  第28回日本ロボット学会学術講演会
- Place of Presentation
  名古屋
- Year and Date
  2010-09-24
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Measurement of Single Living Cell with Optically Driven Nano-machine fabricated by Hybrid Nano-stereolithography2010
- Author(s)
  池内真志, 磯崎賢, 久恵一宏, 嶋田直矢, 生田幸士
- Organizer
  第28回日本ロボット学会学術講演会
- Place of Presentation
  名古屋
- Year and Date
  2010-09-24
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] SOFT TAPERED STENCIL MASK FOR COMBINATORIAL 3D CLUSTER FORMATION OF STEM CELLS2010
- Author(s)
  M.Ikeuchi, K.Oishi, H.Noguchi, S.Hayashi, K.Ikuta
- Organizer
  14th International Conference on Miniaturized Systems for Chemistry and Life Sciences
- Place of Presentation
  Groningen, Netherlands
- Year and Date
  2010-10-03
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Three-dimensional cell culture scaffold fabricated by nano-meshed microsphres2010
- Author(s)
  種良典, 池内真志, 福岡宗明, 生田幸士
- Organizer
  第49回日本生体医工学会大会
- Place of Presentation
  大阪
- Year and Date
  2010-06-25
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 光駆動ナノマシンによる細胞手術のための細胞穿孔手法の開発2010
- Author(s)
  池内真志, 久恵一宏, 嶋田直矢, 生田幸士
- Organizer
  第19回日本コンピュータ外科学会大会
- Place of Presentation
  福岡
- Year and Date
  2010-11-04
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Curing model of resin with magnetic particles in microsteleolithography2010
- Author(s)
  安井真人, 生田幸士
- Organizer
  第28回日本ロボット学会学術講演会
- Place of Presentation
  名古屋
- Year and Date
  2010-09-24
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Precise Bending Angle Control of Hydraulic Active Catheter by Pressure Pulse Drive2010
- Author(s)
  K.Ikuta, D.Yajima, Y.Matsuda, Y.Ohta
- Organizer
  IEEE International Conference on Robotics and Automation (ICRA) 2010
- Place of Presentation
  Anchorage, Alaska
- Year and Date
  2010-05-06
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Development of the internally reconstructable tool for laparoscopic surgery2010
- Author(s)
  廣田和明, 浜島彰徳, 加藤大香士, 生田幸士
- Organizer
  第49回日本生体医工学会大会
- Place of Presentation
  大阪
- Year and Date
  2010-06-25
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Patterning of Biodegradable Microcapsules using an Electrostatic Feild2010
- Author(s)
  種良典, 池内真志, 福岡宗明, 生田幸士
- Organizer
  第28回日本ロボット学会学術講演会
- Place of Presentation
  名古屋
- Year and Date
  2010-09-24
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] ガラス製リアクタによるリアルタイムPCR化学ICの開発2010
- Author(s)
  牧野令士, 笹生恵大, 岩島研, 池内真志, 生田幸士
- Organizer
  第19回日本コンピュータ外科学会大会
- Place of Presentation
  福岡
- Year and Date
  2010-11-04
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] TASCLを用いた胚様体の大量生産と長期培養技術
- Author(s)
  池内真志，豊田悠司，林衆治，生田幸士
- Organizer
  第36回日本バイオマテリアル学会大会
- Place of Presentation
  タワーホール船堀（東京都）
- Year and Date
  2014-11-17 – 2014-11-18
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 胚様体大量培養デバイスTASCLの量産化
- Author(s)
  池内真志，豊田悠司，林衆治，生田幸士
- Organizer
  第14回日本再生医療学会総会
- Place of Presentation
  パシフィコ横浜（横浜市）
- Year and Date
  2015-03-19 – 2015-03-21
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] From Flexible Endoscopes to Nanotools for Single-Cell Surgery
- Author(s)
  Koji Ikuta
- Organizer
  2014 IEEE International Conference on Robotics and Automation (ICRA 2014)
- Place of Presentation
  Hong Kong, China
- Year and Date
  2014-05-31 – 2014-06-07
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 再生医療研究のための全自動胚様体培養チップの開発
- Author(s)
  安川あかね，西島拓弥，池内真志，生田幸士
- Organizer
  ロボティクス・メカトロニクス講演会2014
- Place of Presentation
  富山市総合体育館（富山市）
- Year and Date
  2014-05-25 – 2014-05-29
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 再生医療のための全自動胚様体大量培養デバイスの開発
- Author(s)
  安川あかね，池内真志，西島拓弥，生田幸士
- Organizer
  第53回日本生体医工学会大会
- Place of Presentation
  仙台国際センター（仙台市)
- Year and Date
  2014-06-24 – 2014-06-26
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 胚様体の均一・大量生産を実現する培養デバイス“TASCL”の量産化
- Author(s)
  池内真志，豊田悠司，林衆治，生田幸士
- Organizer
  第41回日本臓器保存生物医学会学術集会
- Place of Presentation
  千里ライフサイエンスセンター（豊中市）
- Year and Date
  2014-11-28 – 2014-11-29
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] Polymer-based 3D Micro/nano Fabrication for Biomedical MEMS
- Author(s)
  Koji Ikuta
- Organizer
  6th PCGMR/NCKU Symposium on “ Nano-Technology/Material for Future Devices”
- Place of Presentation
  National Cheng Kung University,Tainan,Taiwan
- Year and Date
  2014-09-02 – 2014-09-05
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 光駆動マイクロロボットによるタンパク質弾性計測手法の開発
- Author(s)
  嶋田直矢，池内真志，生田幸士
- Organizer
  ロボティクス・メカトロニクス講演会2014
- Place of Presentation
  富山市総合体育館（富山市）
- Year and Date
  2014-05-25 – 2014-05-29
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] ロボットとマイクロマシンは未来医療を革新できるか？
- Author(s)
  生田幸士
- Organizer
  第76回日本臨床外科学会総会
- Place of Presentation
  郡山市民文化センター（郡山市）
- Year and Date
  2014-11-20 – 2014-11-22
- Invited
- Data Source
  KAKENHI-PROJECT-22220008
[Presentation] 光駆動ナノビーム表面修飾による細胞内タンパク質力学特性計測
- Author(s)
  嶋田直矢，池内真志，生田幸士
- Organizer
  第53回日本生体医工学会大会
- Place of Presentation
  仙台国際センター(仙台市）
- Year and Date
  2014-06-24 – 2014-06-26
- Data Source
  KAKENHI-PROJECT-22220008

1. HASEGAWA Tadahiro (10340605)

# of Collaborated Projects: 4 results

# of Collaborated Products: 14 results
2. KATO Takashi (90362285)

# of Collaborated Projects: 3 results

# of Collaborated Products: 17 results
3. MARUO Shoji (00314047)

# of Collaborated Projects: 3 results

# of Collaborated Products: 11 results
4. NAGAKURA Toshiaki (40288577)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
5. NARUSE Keiji (40252233)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
6. IKEUCHI Masashi (90377820)

# of Collaborated Projects: 2 results

# of Collaborated Products: 55 results
7. MORISHIMA Akio (00358186)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
8. TATSUMI Hitoshi (20171720)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. HAYASHI Shuji (30218573)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
10. INOUE Yoshinori (20402505)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
11. TSUKAMOTO Hiroshi (50117305)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. TANAKA Kazuhiro (80171742)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. SOHMURA Taiji (10154692)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. KAWAI Keiji (40204664)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. TAKAHASHI Junzo (80029149)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. OHNAKA Itsuo (00029092)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. YASUDA Hideyuki (60239762)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. MINAMINO Yoritoshi (30116107)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. OHJI Takayoshi (00089880)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. FUKUDA Syuichi (90107095)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. NOKATA Makoto (80335067)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. OTA Yusuke (20367311)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
23. 山田章 (20377815)

# of Collaborated Projects: 1 results

# of Collaborated Products: 14 results
24. 宮本義孝 (20425705)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
25. ISHIHARA Ken

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Ikuta Koji 生田 幸士

生田 幸士 イクタ コウジ

IKUTA Koji 生田 幸士

IKUTA Kohji 生田 幸士

Research Projects

Research Products

Co-Researchers

Exosomal miRNA analysis inside Biochemical IC chips for early detection of cancerPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of a Nano-Micro Platform for Tissue Engineering ApplicationsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Concept and Development of The Optically Driven NanomechatronicsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of the nano device for medical use based on the Biochemical ICPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

DEVELOPMENT OF MICRO FRUID CONTROL SYSTEM BY USING MICROSTEREOLITHOGRAPHYPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

DEVELOPMENT OF BIOCHEMICAL IC CHIPSPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of creativity education and evaluation methods

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of the tooth preparation system with low noize and facility to support die preparation

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study of Minimum Invasive Remote Surgery in the Abdomial CavityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study of Micro Integrated Fluid System using Micro Stereo LithographyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

集束光を用いた3次元微細構造物作製法に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Enhancement of Hydraulic Machinery by Use of Shape Memory Alloys

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] リキッドバイオプシー（落谷孝広）内の"早期癌発見をめざすマイクロRNA分析用ポータブルデバイスの開発"2017

Ikuta Koji 生田幸士

生田幸士イクタコウジ

IKUTA Koji 生田幸士

IKUTA Kohji 生田幸士