• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Sasaki Katsuhiko  佐々木 克彦

ORCIDConnect your ORCID iD *help
… Alternative Names

SASAKI Katsuhiko  佐々木 克彦

SASAKI Katuhiko  佐々木 克彦

Less
Researcher Number 90215715
Other IDs
External Links
Affiliation (Current) 2025: 北海道大学, 工学研究院, 特任教授
Affiliation (based on the past Project Information) *help 2016: 北海道大学, 工学研究院, 教授
2012 – 2015: 北海道大学, 工学(系)研究科(研究院), 教授
2014: 北海道大学, 大学院工学研究院, 教授
2010 – 2011: 北海道大学, 大学院・工学研究院, 教授
2009: 北海道大学, 大学院・工学研究科, 教授 … More
2007: Hokkaido University, Grad. School of Eng., Associate Professor
2006: Hokkaido Univ., Grad. School of Eng., Asso. Prof, 大学院工学研究科, 助教授
2005: 北海道大学, 大学院・工学研究科, 助教授
1997 – 2001: 北海道大学, 大学院・工学研究科, 助教授
1999: 北海道大学, 工学研究科, 助教授
1997: Hokkaido Univ., Graduate School of Eng., Assoc.Prof., 大学院・工学科研究科, 助教授
1995 – 1996: 北海道大学, 工学部, 助教授
1992 – 1993: Hokkaido University, Faculty of Engineering, Assistant Professor, 工学部, 講師
1991: 北海道大学, 工学部, 助手 Less
Review Section/Research Field
Principal Investigator
Materials/Mechanics of materials / Materials/Mechanics of materials
Except Principal Investigator
Materials/Mechanics of materials / 材料力学 / Dynamics/Control / Nuclear fusion studies
Keywords
Principal Investigator
SUS316L / 構造解析 / 塑性変形 / ステント / 有限要素解析 / 構成式 / Constitutive Model / Creep / Structural Analysis / Surface Aspect … More / Biomaterials / CP-Titanium / Stent / チタン / SUS316 / クリープ / 表面性状 / 生体材料 / CPチタン / Stress Relaxation / Creep Deforamtion / Plastic Deforamtion / Constitutive Modeling / Temperature Dependence / Time Dependent Deformation / Lead Free Solder Alloys / Electronic Device / 温度依存性 / 応力緩和 / クリープ変形 / 構成モデル / 雰囲気温度依存性 / 時間依存性 / 鉛フリーはんだ / 電子実装基板 / 粘塑性変形 / 変形特性 / 連成解析 / 流体解析 / 変形解析 / バルーン拡張ステント / 非線形変形 / 医療機器 / 有限要素法 / 動脈硬化 / 3次元構造物 / 力学特性 / Sn合金 / Pb / 表面張力 / マイクロマシン / 疲労寿命 / 損傷 / 非弾性ひずみエネルギ / 繰返し負荷 / アコースティック・エミッション / 微視的測定 / CFRP … More
Except Principal Investigator
疲労寿命 / 最適化 / 複合材料 / Design engineering / Structural & functional materials / Dynamics & control / Strength of materials / Composites materials / 設計工学 / 構造・機能材料 / 機械力学・制御 / 機械材料・材料力学 / 複合材料・物性 / Ultrasonic / Dislocation / Simulation / Finite Plasticity Model / Secondary Effect / Finite Deformation / Plastic Deformation / Micro Forming Process / 微視的構造変化 / 有限塑性構成則 / マイクロ成形プロセス / 超音波 / 転位 / シミュレーション / 有限塑性構成式 / 二次効果 / 有限変形 / 塑性変形 / マイクロ形成プロセス / Fatigue Failure / Solder Alloys / Creep / Viscoplasticity / Constitutive equation / Macrostructural Mechanics / Microstructural Mechanics / Electoronic Packaging / はんだ材 / クリープ / 粘弾塑性 / 構成式 / 巨視的力学特性 / 微視的力学特性 / 電子パッケージ / 3D FEM / Thermal Fatigue / viscoplastic Constitutive model / Temperature Effect / 60Sn-40Pb Solder / Rate Effect / Sub-micro Structure / Electronic Device / 塑性ひずみエネルギ密度 / 60Snー40Pb合金 / 三次元有限要素法 / 60Sn-40Pb合金 / 熱疲労 / 3次元有限要素法 / 粘塑性構成式 / 60Sn-40Pb / 温度効果 / 速度効果 / サブミクロ構造 / 電子デバイス / Macroscopic Mechanics / Microscopic Mechanics / Fatigue Property / Fracture Criterion / Macroscopic Cyclic Deformation / Macroscopic Visco-elasto-plasticity / Advanced Composite Materials / 微視的力学的特性 / 巨視的力学的特性 / 疲労特性 / 破壊条件 / 巨視的繰返し変形挙動 / 巨視的粘弾塑性挙動 / 先進複合材料 / Laser Speckle / Ceramic Coating / Finite Element Method / Constitutive Model for Plasticity / Repeated Plasticity / Rolling-Sliding Contact / Wear Mechanism / シミュレ-ション / 破壊力学 / くり返し塑性構成式 / セラミック・コ-テング / トライボロジ / セラミックス・コ-ティング / レーザースペックル / セラミックス・コーティング / 有限要素法 / 塑性構成式 / 繰返し塑性 / ころがり-すべり接触 / 摩耗機構 / CNT / 接合 / 鉄系材料 / 焼結 / 二次元配向 / カーボンナノチューブ / カーボンファイバー / 熱伝導率 / 機械的特性 / 照射効果 / 構造材料 / 熱伝導性 / 航空機 / 自動車 / 座屈解析 / 自動車パネル / 航空機構造 / 振動解析 / 最適設計 / 軽量構造 Less
  • Research Projects

    (13 results)
  • Research Products

    (49 results)
  • Co-Researchers

    (19 People)
  •  Optimal Design of Balloon Expanded Stent to Reduce Damage of Bessel VesselPrincipal Investigator

    • Principal Investigator
      Sasaki Katsuhiko
    • Project Period (FY)
      2014 – 2016
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Hokkaido University
  •  Development of Fe-based composite materials with a high thermal conductivity

    • Principal Investigator
      HASHIMOTO Naoyuki
    • Project Period (FY)
      2012 – 2014
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Nuclear fusion studies
    • Research Institution
      Hokkaido University
  •  Application of new concept composites to aerospace and automobile structures and the related multi-purpose optimization

    • Principal Investigator
      NARITA Yohsihiro
    • Project Period (FY)
      2009 – 2011
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Dynamics/Control
    • Research Institution
      Hokkaido University
  •  GENERATION AND OPTIMIZATION OF NEXT GENERATION AUTOMOBILE COMPOSITES WITH ARBITRATY CURVATURE

    • Principal Investigator
      NARITA Yoshihiro
    • Project Period (FY)
      2005 – 2007
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Dynamics/Control
    • Research Institution
      Hokkaido University
  •  Deformation Analysis on Micro-Stent Considering Microstructural Change of Pure TitaniumPrincipal Investigator

    • Principal Investigator
      SASAKI Katsuhiko
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      HOKKAIDO UNIVERSITY
  •  Research on Deformation Control Constitutive Model for Lead Free Electronic DevicesPrincipal Investigator

    • Principal Investigator
      SASAKI Katsuhiko
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      HOKKAIDO UNIVERSITY
  •  Research on Deformation Control Simulation for Micro-Factory

    • Principal Investigator
      ISHIKAWA Hiromasa
    • Project Period (FY)
      1999 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      HOKKAIDO UNIVERSITY
  •  表面張力を利用した3次元マイクロ構造物の力学特性に関する研究Principal Investigator

    • Principal Investigator
      佐々木 克彦
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Hokkaido University
  •  複合負荷を受ける先進複合材料のダメ-ジと巨視的力学特性の相互関係に関する研究Principal Investigator

    • Principal Investigator
      佐々木 克彦
    • Project Period (FY)
      1995
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Hokkaido University
  •  Research on Thermal Meromechanics of Electronic Packaging

    • Principal Investigator
      ISHIKAWA Hiromasa
    • Project Period (FY)
      1995 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      HOKKIDO UNIVERSITY
  •  Estimation of Strength and Fracture of Advanced Composite Materials

    • Principal Investigator
      ISHIKAWA Hiromasa, 石川 博将
    • Project Period (FY)
      1991 – 1992
    • Research Category
      Grant-in-Aid for international Scientific Research
    • Research Institution
      Hokkaido University
  •  RESEARCH ON THERMO-MICRO-MECHANICS OF COMOPSITE MATERIALS FOR ELECTRONIC DEVICE

    • Principal Investigator
      KSHIKAWA Hiromasa
    • Project Period (FY)
      1991 – 1993
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      材料力学
    • Research Institution
      (FACULTY OF ENGINEERING) HOKKAIDO UNIVERSITY
  •  Research on evaluation and examination for wear of ceramic coated materials

    • Principal Investigator
      ISHIKAWA Hiromasa
    • Project Period (FY)
      1990 – 1992
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B)
    • Research Field
      材料力学
    • Research Institution
      Hokkaido University (Faculty of Engineering)

All 2016 2015 2010 2009 2008 2007 2006 2005 Other

All Journal Article Presentation

  • [Journal Article] Evaluation of the Stress Distribution by the Stepped Load Indentation Test with Constant Depth2016

    • Author(s)
      Atsuko Takita, Katsuhiko Sasaki, Ken-ichi Ohguchi, and Hiroyuki Fujiki
    • Journal Title

      Key Engineering Materials

      Volume: 725 Pages: 293-298

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Journal Article] Biaxial Ratchetting Deformation of Solders Considering Halt Conditions2016

    • Author(s)
      Yusuke Tomizawa, Takehito Suzuki, Katsuhiko Sasaki, Daisuke Echzenya
    • Journal Title

      Key Engineering Materials

      Volume: 725 Pages: 299-304

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Journal Article] プラーク特性を考慮した自己拡張ステントの変形解析2016

    • Author(s)
      境野達也,佐々木克彦,黒田明慈,武田量
    • Journal Title

      第27回バイオフロンティア講演会講演論文集

      Volume: 1 Pages: 151-152

    • NAID

      130007119218

    • Data Source
      KAKENHI-PROJECT-26420001
  • [Journal Article] Residual Stress Analysis Considering Phase Transformation and Transformation Plasticity for Heat-Treated Large Size Shaft2016

    • Author(s)
      Yusuke Yanagisawa, Yasuhiro Kishi, and Katsuhiko Sasaki
    • Journal Title

      Key Engineering Materials

      Volume: 725 Pages: 647-652

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Journal Article] 先端超弾性合金を用いた自己拡張型ステント留置解析2015

    • Author(s)
      友岡由紀子,佐々木克彦,武田量
    • Journal Title

      日本機械学会2015年度年次大会講演論文集

      Volume: 1

    • Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Journal Article] Mechanical Influence of Advanced Shape-Memory Alloy Stents during Deployment2015

    • Author(s)
      Yukiko Tomooka, Katsuhiko Sasaki, and Ryo Takeda
    • Journal Title

      Proceedings of Eighth Asian-Pacific Conference on Biomechanics

      Volume: 1 Pages: 272-272

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Journal Article] 脈動流による血管変形を考慮したステント拡張解析2015

    • Author(s)
      星野 あまね,黒田 明慈,佐々木 克彦,武田 量
    • Journal Title

      日本機械学会2015年度年次大会講演論文集

      Volume: 1

    • Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Journal Article] Effects of plaque lengths on stent surface roughness2015

    • Author(s)
      Achmad Syaifudin, Ryo Takeda, and Katsuhiko Sasaki
    • Journal Title

      Bio-Medical Materials and Engineering

      Volume: 25 Pages: 189-202

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Journal Article] Development of Asymmetric Stent for Treatment of Eccentric Plaque2015

    • Author(s)
      Achmad Syaifudin, Ryo Takeda, and Katsuhiko Sasaki
    • Journal Title

      Proceedings of Eighth Asian-Pacific Conference on Biomechanics

      Volume: 1 Pages: 265-265

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Journal Article] AnalYtical and experimental study for vibration of laminated VGCF/Alcircular plate2010

    • Author(s)
      Naoaki Koya, Shinya Honda, Katsuhiko Sasaki, Yoshihiro Narita
    • Journal Title

      Proceedings, The 7th Asian-Australasian Conference on Composite Material (ACCM-7), Taipei, Taiwan

      Volume: CD-ROM Wed-SE27-02

    • Data Source
      KAKENHI-PROJECT-21360105
  • [Journal Article] 繊維形状最適化による複合材積層板の固有振動数最大化2009

    • Author(s)
      本田真也, 成田吉弘, 佐々木克彦
    • Journal Title

      日本機械学会論文集(C編)

      Volume: Vol.75, No.753 Pages: 1244-1250

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360105
  • [Journal Article] 繊維形状最適化による複合材積層板の固有振動数最大化2009

    • Author(s)
      本田真也, 大西良昌, 成田吉弘, 佐々木克彦
    • Journal Title

      日本機械学会論文集(C編) 75

      Pages: 1244-1250

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360105
  • [Journal Article] Maximizing the Fundamental Frequency of Laminated Composite Plates with Optimally Shaped Curvilinear Fibers2009

    • Author(s)
      Shinya Honda, Yoshihiro Narita, Katsuhiko Sasaki
    • Journal Title

      Journal of System Design and Dynamics, JSME 13

      Pages: 867-876

    • NAID

      130000150743

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360105
  • [Journal Article] Discrete Optimization for Vibration Design of Composite Plates by Using Lamination Parameters2009

    • Author(s)
      Shinya Honda, Yoshihiro Narita and Katsuhiko Sasaki
    • Journal Title

      Advanced Composite Materials

      Volume: Vol.18 Pages: 297-314

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360105
  • [Journal Article] Maximizing the Fundamental Frequency of Laminated Composite Plates with Optimally Shaped Curvilinear Fibers2009

    • Author(s)
      Shinya Honda, Yoshihiro Narita and Katsuhiko Sasaki
    • Journal Title

      JSDD

      Volume: 3 Issue: 6 Pages: 867-876

    • DOI

      10.1299/jsdd.3.867

    • NAID

      130000150743

    • ISSN
      1881-3046
    • Language
      English
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360105
  • [Journal Article] Discrete Optimization for Vibration Design of Composite Plates by Using Lamination Parameters2009

    • Author(s)
      Shinya Honda, Yoshihiro Narita, Katsuhiko Sasaki
    • Journal Title

      Advanced Composite Materials 18

      Pages: 297-314

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360105
  • [Journal Article] Vibration Analysis of Composite Rectangular Plates Reinforced along Curved Lines2008

    • Author(s)
      Shinya Honda, Yoshimasa Oonishi, Yoshihiro Narita, Katsuhiko Sasaki
    • Journal Title

      Journal of System Design and Dynamics Vol. 2

      Pages: 76-86

    • NAID

      130000098865

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360103
  • [Journal Article] Vibration Analysis of Composite Rectangular Plates Reinforced along Curved Lines2008

    • Author(s)
      Shinya Honda, Yoshimasa Oonishi, Yoshihiro Narita, Katsuhiko Sasaki
    • Journal Title

      Journal of System Design and Dynamics 2

      Pages: 76-86

    • NAID

      130000098865

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17360103
  • [Journal Article] Ratchetting and Creep Deformation of Solder Alloys2007

    • Author(s)
      Kobayashi T., Sasaki K., Ohguchi K., Narita Y.
    • Journal Title

      Key Engineering Materials 340-341

      Pages: 859-864

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17360103
  • [Journal Article] Optimization for the Maximum Buckling Loads of Laminated Composite Plates-Comparison of Various Design Methods2007

    • Author(s)
      Honda S., Narita Y., Sasaki K.
    • Journal Title

      Key Engineering Materials 334-335

      Pages: 89-92

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17360103
  • [Journal Article] Quantitative Evaluation of dislocation Structure Induced by cyclic Plasticity2007

    • Author(s)
      Mayama T., Sasaki K., Narita Y.
    • Journal Title

      Key Engineering Materials 345-346

      Pages: 49-52

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17360103
  • [Journal Article] Relationship between Phenomenological Constitutive Model and Dislocation Structure in Cyclic Plasticity of Austenitic Strainl2007

    • Author(s)
      Mayama T, Sasaki K., Narita Y.
    • Journal Title

      Key Engineering Materials 340-341

      Pages: 871-876

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17360103
  • [Journal Article] Surface Morphological Changes in CP-Ti and SUS316L under Pure Tensile Loading and Creep2007

    • Author(s)
      Tsuyoshi Mayama, Katsuhiko Sasaki, Yoshihiro Narita
    • Journal Title

      Key Engineering Materials 353-358

      Pages: 607-610

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17360103
  • [Journal Article] Experimental and Theoretical Investigation of Viscoplastic Deformation of solder alloys for Electronic Packaging2007

    • Author(s)
      Kobayshi T., Sasaki K., Ohguchi K., Narita Y.
    • Journal Title

      Key Engineering Materials 345-346

      Pages: 97-100

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17360103
  • [Journal Article] The Shear Deformable Effect on Optimum Lay-ups of Laminated Plates2007

    • Author(s)
      Murayama K., Narita Y., Sasaki K.
    • Journal Title

      Key Engineering Materials 334-335

      Pages: 97-100

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17360103
  • [Journal Article] Optimization of Sound Pressure from Vibrating Laminated Rectangular Plates2007

    • Author(s)
      Kawakami T., Narita Y., Sasaki K.
    • Journal Title

      Key Engineering Materials 334-335

      Pages: 93-96

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17360103
  • [Journal Article] A General Finite Element Analysis Method for Balloon Expandable Stents based on Repeated Unit Cell (RUC) Model2007

    • Author(s)
      Zihui Xia, Feng Jua, Katsuhiko Sasaki
    • Journal Title

      Journal of Finite Elements in Analysis and Design (In press)

    • Data Source
      KAKENHI-PROJECT-17560057
  • [Journal Article] A General Finite Element Analysis Method for Balloon Expandable Stents based on Repeated Unit Cell (RUC) Model2007

    • Author(s)
      Zihui Xia, Feng Jua, Katsuhiko Sasaki
    • Journal Title

      Journal of Finite Elements in Analysis and Design Vol. 43

      Pages: 649-658

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560057
  • [Journal Article] A Constitutive Model of Cyclic Viscoplasticity Considering Changes in Subsequent Viscoplastic Deformation due to the Evolution of Dislocation Structures2007

    • Author(s)
      T.Mayama, K.Sasaki, H.Ishikawa
    • Journal Title

      International Journal of Plasticity Vol. 23

      Pages: 915-930

    • Data Source
      KAKENHI-PROJECT-17560057
  • [Journal Article] Quantitative Evaluation of Dislocation Structure Induced by Cyclic Plasticity2007

    • Author(s)
      Tsuyoshi Mayama, Katsuyoshi Sasaki, Yoshihiro Narita
    • Journal Title

      Key Engineering Materials 345-346

      Pages: 49-52

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17360103
  • [Journal Article] A Constitutive Model of Cyclic Viscoplasticity Considering Changes in Subsequent Viscoplastic Deformation due to the Evolution of Dislocation Structures2007

    • Author(s)
      Mayama, K.Sasaki, H.Ishikawa T.
    • Journal Title

      InternationalJournal of Plasticity Vol.23

      Pages: 915-930

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560057
  • [Journal Article] Investigation of Subsequent Viscoplastic Deformation of Austenitic Stainless Steel Subjected to Cyclic Preloading2006

    • Author(s)
      T.Mayama, K.Sasaki
    • Journal Title

      International Journal of Plasticity Vol.22

      Pages: 374-390

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560057
  • [Journal Article] Investigation of Subsequent Viscoplastic Deformation of Austenitic Stainless Steel Subjected to Cyclic Preloading2006

    • Author(s)
      F.Mayama, K.Sasaki
    • Journal Title

      International Journal of Plasticity 22

      Pages: 374-390

    • Data Source
      KAKENHI-PROJECT-17560057
  • [Journal Article] 繰返し塑性によるステンレス鋼のメゾ組織発展2005

    • Author(s)
      眞山剛, 中田光洋, 佐々木克彦, 石川博將
    • Journal Title

      M&M2005材料力学カンファレンス講演論文集 1

      Pages: 387-388

    • Data Source
      KAKENHI-PROJECT-17560057
  • [Journal Article] SUS316L材の非弾性変形モデルとメゾ構造の関係について2005

    • Author(s)
      眞山 剛, 佐々木克彦, 成田吉弘
    • Journal Title

      日本機械学会2005年度年次大会講演論文集 1

      Pages: 485-486

    • Data Source
      KAKENHI-PROJECT-17560057
  • [Presentation] プラーク特性を考慮した自己拡張ステントの変形解析2016

    • Author(s)
      境野達也,佐々木克彦,黒田明慈,武田量
    • Organizer
      第27回バイオフロンティア講演会講演論文集
    • Place of Presentation
      北海道大学
    • Year and Date
      2016-10-22
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] Residual Stress Analysis Considering Phase Transformation and Transformation Plasticity for Heat-Treated Large Size Shaft2016

    • Author(s)
      Yusuke Yanagisawa, Yasuhiro Kishi, and Katsuhiko Sasaki
    • Organizer
      Key Engineering Materials
    • Place of Presentation
      Saijyo, Japan
    • Year and Date
      2016-12-04
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] Evaluation of the Stress Distribution by the Stepped Load Indentation Test with Constant Depth2016

    • Author(s)
      Atsuko Takita, Katsuhiko Sasaki, Ken-ichi Ohguchi, and Hiroyuki Fujiki
    • Organizer
      AEPA’2016
    • Place of Presentation
      Saijyo, Japan
    • Year and Date
      2016-12-04
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] Biaxial Ratchetting Deformation of Solders Considering Halt Conditions2016

    • Author(s)
      Yusuke Tomizawa, Takehito Suzuki, Katsuhiko Sasaki, Daisuke Echzenya
    • Organizer
      AEPA’2016
    • Place of Presentation
      Saijyo, Japan
    • Year and Date
      2016-12-04
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] 先端超弾性合金を用いた自己拡張型ステント留置解析2015

    • Author(s)
      友岡由紀子,佐々木克彦,武田量
    • Organizer
      日本機械学会2015年度年次大会講演論文集
    • Place of Presentation
      北海道大学(札幌)
    • Year and Date
      2015-09-13
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] 脈動流による血管変形を考慮したステント拡張解析2015

    • Author(s)
      星野 あまね,黒田 明慈,佐々木 克彦,武田 量
    • Organizer
      日本機械学会2015年度年次大会
    • Place of Presentation
      北海道大学(札幌)
    • Year and Date
      2015-09-13
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] Mechanical Influence of Advanced Shape-Memory Alloy Stents during Deployment2015

    • Author(s)
      Yukiko Tomooka, Katsuhiko Sasaki, and Ryo Takeda
    • Organizer
      Eighth Asian-Pacific Conference on Biomechanics
    • Place of Presentation
      Hokkaido University (Sapporo)
    • Year and Date
      2015-09-16
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] Development of Asymmetric Stent for Treatment of Eccentric Plaque2015

    • Author(s)
      Achmad Syaifudin, Ryo Takeda, and Katsuhiko Sasaki
    • Organizer
      Eighth Asian-Pacific Conference on Biomechanics
    • Place of Presentation
      Hokkaido University (Sapporo)
    • Year and Date
      2015-09-16
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] VGCF/A1債層円板の振動解析2009

    • Author(s)
      古家直明, 佐々木克彦, 成田吉弘
    • Organizer
      日本機械学会D & D2009
    • Place of Presentation
      北海道大学、札幌
    • Year and Date
      2009-08-05
    • Data Source
      KAKENHI-PROJECT-21360105
  • [Presentation] 脈動流による血管変形を考慮したステント拡張解析

    • Author(s)
      星野あまね,黒田明慈,佐々木克彦,武田量
    • Organizer
      日本機械学会2015年度年次大会
    • Place of Presentation
      北海道大学(札幌市)
    • Year and Date
      2015-09-13 – 2015-09-16
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] Mechanical influence of advanced shape-memory alloy stents during deployment

    • Author(s)
      Yukiko Tomooka, Ryo Takeda, and Katsuhiko Sasaki
    • Organizer
      The 8th Asian-Pacific Conference on Biomechanics
    • Place of Presentation
      Hokkaido University (Sapporo)
    • Year and Date
      2015-09-16 – 2015-09-19
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] Development of asymmetric stent for treatment of eccentric plaque

    • Author(s)
      Achmad Syaifudin, Ryo Takeda, and Katsuhiko Sasaki
    • Organizer
      The 8th Asian-Pacific Conference on Biomechanics
    • Place of Presentation
      Hokkaido University (Sapporo)
    • Year and Date
      2015-09-16 – 2015-09-19
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] 新超弾性合金を用いた自己拡張型ステント留置解析

    • Author(s)
      友岡由紀子,佐々木克彦、武田量
    • Organizer
      日本機械学会2015年度年次大会
    • Place of Presentation
      北海道大学(札幌市)
    • Year and Date
      2015-09-13 – 2015-09-16
    • Data Source
      KAKENHI-PROJECT-26420001
  • [Presentation] ステントのバルーン形状が偏心性プラーク変形に与える影響

    • Author(s)
      SyaifudinAchmad, 佐々木克彦, 武田量
    • Organizer
      日本機械学会2014年度年次大会
    • Place of Presentation
      東京電機大学(東京都)
    • Year and Date
      2014-09-08 – 2014-09-10
    • Data Source
      KAKENHI-PROJECT-26420001
  • 1.  ISHIKAWA Hiromasa (80001212)
    # of Collaborated Projects: 6 results
    # of Collaborated Products: 0 results
  • 2.  TADANO Sigeru (50175444)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 3.  NARITA Yohsihiro (00137407)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 18 results
  • 4.  FUJIKI Hiroyuki (80238550)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 5.  MUKAI Shin (70243045)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 6.  KOBAYASHI Michiaki (20105539)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 7.  HASHIMOTO Naoyuki (50443974)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 8.  MURAKAMI Sumio (10023053)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 9.  NOGUCH Touru (80001220)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 10.  KOBAYASHI Yukinori (10186778)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 1 results
  • 11.  MAYAMA Tsuyoshi (40333629)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 4 results
  • 12.  OHTA Yoshiki (50233151)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 13.  NARISAWA Tetsuya (10249766)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 14.  UCHIDA Takeshi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 15.  WENG George J.
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 16.  KREMPL Erhard
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 17.  ELLYIN Fernand
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 18.  STEIGMANN Da
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 19.  STEIGMANN David F.
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi