CHEN Dai-heng 陳ダイコウ

Connect your ORCID iD *help

… Alternative Names

陳玳こうチンダイコウ

CHEN Daiheng 陳玳〓

陳玳[コウ] チンダイコウ

陳玳ユウチンダイユウ

陳玳〓チンダイコウ

Less

Researcher Number	90217266
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2009 – 2013: Tokyo University of Science, 工学部, 教授 2003 – 2004: 東京理科大学, 工学部, 教授 1996 – 2000: 東京理科大学, 工学部, 教授 1995: 九州工業大学, 情報工学部, 助教授 1990 – 1993: 九州工業大学, 情報工学部, 助教授
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / 材料力学 / Materials/Mechanics of materials / Design engineering/Machine functional elements/Tribology Except Principal Investigator Materials/Mechanics of materials / Design engineering/Machine functional elements/Tribology
Keywords	Principal Investigator 界面き裂 / 応力拡大係数 / 応力特異性 / 接着欠陥 / ハニカム / Interface crack / Stress intensity factor / Stress singularity / 破壊力学 / 応力集中 … More / 勾配探索法 / 体積力法 / き裂測定 / 非破壊検査 / 逆問題 / I type structure / Stress concentration / Adhesion defect / Honeycomb / 接合板 / I型構造材 / interface crack / fracture mechanics / stress intensity factor / stress singularity / adhesion defect / honeycomb / Elastic-plastic singular stress field / Fracture Mechanics / Stress Concentration / Composite Material / Interface / 弾塑性特異応力場 / 複合材料 / 接合界面 / Gradient search / Body force method / Detection of crack / Non-destructive examination / Inverse problem / 匂配探索法 / 逆間題 / 安全・安心設計 / 衝突吸収 / 安心・安全設計 / 体積力学 … More Except Principal Investigator Stress Singularity / Phase Boundary / Aging / Constitutive Equation / Mixed Mode Crack / Crack on Phase Boundary / Dimple Fracture / Fracture Surface Analysis / 疲労破壊 / 塑性応力特異性 / 粘弾性 / ひずみ時効 / パターンマッチング / 損傷解析 / 微小き裂 / 応力特異性 / 界面 / 速度効果 / 遺伝的アルゴリズム / 画像処理 / 塑性拘束 / 粘性 / 時効 / ディンブル破壊 / 特異応力場 / 異材界面 / 粘性・時効 / 非弾性構成式 / 混合モードき裂 / 界面き裂 / ディンプル破壊 / 破面解析 / Nonlinear Crack Mechanics / In-situ observation / Scanning Laser Microscope / Crack Opening Displacement / Crack Growth Rate / Crack / Fatigue / き裂伝ぱ / 非線形き裂力学 / その場観察 / 走査型レーザ顕微鏡 / き裂開口変位 / き裂伝ぱ速度 / き裂 / 疲労 / 国際情報交流　ASEAN / 変形コード / マスターカーブ / 変形モード / 衝撃吸収部材 Less

Development of load-displacement control frame of the wedge-shaped shock absorbing member
- Principal Investigator
  
  HARUYAMA shigeyuki
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Yamaguchi University
Development of cast collision absorption partsPrincipal Investigator
- Principal Investigator
  
  CHEN Daiheng
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Tokyo University of Science
Development of the evaluation method on the strength of I type structure with an interface crackPrincipal Investigator
- Principal Investigator
  
  CHEN Daiheng
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  TOKYO UNIVERSITY OF SCIENCE
Basic study of the strength evaluation of honeycomb structure which has an adhesion defectPrincipal Investigator
- Principal Investigator
  
  CHEN Daiheng
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Science University of Tokyo
Study on the meso-scopic fracture mechanics based on the non-uniform micro-mechanism of metals.
- Principal Investigator
  
  OKUMURA Hiroyuki
- Project Period (FY)
  1997 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Science University of Tokyo
Strength Evaluation Based on Singular Stress Field Around Interface of Jointed Dissimilar MaterialsPrincipal Investigator
- Principal Investigator
  
  CHEN Dai-heng
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Science University of Tokyo
In-situ observation rig using a scanning laser microscope and its application to the COD measurement of fatigue crack (Unifying the measure of severity controlling the crack growth rate in small and large cracks)
- Principal Investigator
  
  ODA Yasuji
- Project Period (FY)
  1995 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  KYUSHU UNIVERSITY
Detection of a crack based on the data of strainsPrincipal Investigator
- Principal Investigator
  
  CHEN Dai-heng
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  材料力学
- Research Institution
  Kyushu Institute of Technology
破壊力学および人工知能援用によるき裂位置および形状のオンライン測定Principal Investigator
- Principal Investigator
  
  陳玳ユウ (陳玳〓)
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  材料力学
- Research Institution
  Kyushu Institute of Technology

All 2013 2012 2011 2010 2009 2005 2003 Other

All Journal Article Presentation

[Journal Article] Implementing ALD in Product Development : The Effect of Geometrical Dimensions on Tubular Member Deformation2013
- Author(s)
  Shigeyuki HARUYAMA, Aidil Khaidir BIN MUHAMAD,Tadayuki KYOUTANI, Ken KAMINISHI, Dai-Heng CHEN
- Journal Title
  
  International Journal of Mechanical, Industrial Science and Engineering
  
  Volume: Vol.7 No.11 Pages: 413-417
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560162
[Journal Article] Modes of Collapse of Compress_Expand Member under Axial Loading2013
- Author(s)
  Shigeyuki Haruyama, Aidil Khaidir Bin Muhamad, Ken Kaminishi, and Dai-Heng Chen
- Journal Title
  
  World Academy of Science, Engineering and Technology
  
  Volume: 74 Pages: 657-664
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560162
[Journal Article] Implementing ALD in Product Development: The Effect of Geometrical Dimensions on Tubular Member Deformation2013
- Author(s)
  Shigeyuki HARUYAMA, Aidil Khaidir BIN MUHAMAD,Tadayuki KYOUTANI, Ken KAMINISHI, Dai-Heng CHEN
- Journal Title
  
  International Journal of Mechanical, Industrial Science and Engineering
  
  Volume: Vol.7 No.11 Pages: 413-417
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560162
[Journal Article] Modes of Collapse of Compress–Expand Member under Axial Loading2013
- Author(s)
  Shigeyuki Haruyama, Aidil Khaidir Bin Muhamad, Ken Kaminishi, and Dai-Heng Chen
- Journal Title
  
  World Academy of Science, Engineering and Technology
  
  Volume: Vol.74 Pages: 657-664
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560162
[Journal Article] Study on the Deformation Modes of an Axially Crushed Compact Impact Absorption Member2012
- Author(s)
  Shigeyuki Haruyama, Hiroyuki Tanaka, Dai-Heng Chen, Aidil Khaidir Bin Muhamad
- Journal Title
  
  World Academy of Science, Engineering and Technology
  
  Volume: Vol.66 Pages: 1222-1230
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560162
[Journal Article] Study on the Deformation Modes of Axially Crushed Compact Impact Absorption Member2012
- Author(s)
  Shigeyuki Haruyama,Hiroyuki Tanaka, Dai-Heng Chen, Aidil Khaidir Bin Muhamad
- Journal Title
  
  WORLD ACADEMY OF SCIENCE, Engineering and Technology
  
  Volume: 1 Pages: 2013-2017
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560162
[Journal Article] Estimation of the initial peak load for circular tubes subjected to axial impact2011
- Author(s)
  Chen, D. H. and Ushijima, K.
- Journal Title
  
  Thin-Walled Structures
  
  Volume: Vol.49, No.7 Pages: 889-898
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Axially Crushed Characteristics of Compact Impact Absorption Member2011
- Author(s)
  Shigeyuki Haruyama, Hiroyuki Tanaka, Dai-Heng Chen, Aidil Khaidir
- Journal Title
  
  The 8th International Conference on Innovation and Management (ICIM 2011)
  
  Pages: 1047-1051
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560162
[Journal Article] Effect of Deformation Mode of Cylindrical Tubes with Corrugated Surface Dimensional Errors2011
- Author(s)
  Shigeyuki Haruyama, Daiheng Chen, Ken Kaminishi, Takuya Niyama
- Journal Title
  
  The 8th International Conference on Innovation and Management (ICIM 2011)
  
  Pages: 335-341
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560162
[Journal Article] Effect of Deformation Mode of Cylindrical Tubes with Corrugated Surface Dimensional Errors2011
- Author(s)
  Shigeyuki Haruyama, Daiheng Chen, Ken Kaminishi, Takuya Niyama
- Journal Title
  
  The 8th International Conference on Innovation　and Management (ICIM 2011)
  
  Volume: 1 Pages: 335-331
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560162
[Journal Article] 軸方向に周期的波を有する板薄円錐型吸収部材の軸圧潰特性2011
- Author(s)
  陳玳行, 増田健一, 角田真一
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 第77巻第774号 Pages: 261-270
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Crushing Behavior of Combined Honeycomb Structure2011
- Author(s)
  Dai-Heng CHEN and Kuniharu USHIJIMA
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: Vol.5, No.9 Pages: 445-458
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Crushing Behavior of Combined Honeycomb Structure2011
- Author(s)
  Dai-Heng CHEN, Kuniharu USHIJIMA
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 5 Pages: 445-458
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 軸方向に周期的波を有する板薄円錐型吸収部材の軸圧潰特性2011
- Author(s)
  陳玳〓, 増田健一, 角田真一
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 第77巻第774号pp.261-270 Pages: 261-270
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Axially Crushed Characteristics of Compact Impact Absorption Member2011
- Author(s)
  Shigeyuki Haruyama, Hiroyuki Tanaka, Dai-Heng Chen, Aidil Khaidir
- Journal Title
  
  The 8th International Conference on Innovation　and Management (ICIM 2011)
  
  Volume: １ Pages: 1047-1051
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560162
[Journal Article] Estimation of the initial peak load for circular tubes subjected to axial impact2011
- Author(s)
  Chen, D.H., Ushijima, K.
- Journal Title
  
  Thin-Walled Structures
  
  Volume: 49 Pages: 889-898
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 圧潰特性に関する結合ハニカムの設計2010
- Author(s)
  陳玳行, 岡田光, 牛島邦晴
- Journal Title
  
  設計工学
  
  Volume: 第45巻第7号 Pages: 343-350
- NAID
  10026793349
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] ひずみ速度依存性を考慮した薄肉円筒の軸方向衝突における平均荷重2010
- Author(s)
  陳玳〓, 藤田昂史, 牛島邦晴
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 76 Pages: 1295-1302
- NAID
  110007819832
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 波型断面を有する薄板梁の曲げ崩壊2010
- Author(s)
  陳玳〓, 増田健一
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 76 Pages: 1565-1572
- NAID
  110008143562
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 薄肉角筒のねじり崩壊2010
- Author(s)
  陳玳〓, 岡本匡史, 増田健一
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 76 Pages: 1170-1177
- NAID
  110007730352
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 線形切欠き力学の考え方-試験片の強さから実物の強さへ2010
- Author(s)
  陳玳〓
- Journal Title
  
  トライボロジスト
  
  Volume: 55 Pages: 689-694
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 斜め方向からの圧縮荷重を受ける階段状の円筒の入り込み変形2010
- Author(s)
  陳玳行, 牛島邦晴
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 第76巻第769号 Pages: 1178-1185
- NAID
  110007730353
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] ハニカムのねじり剛性2010
- Author(s)
  陳玳〓
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 76 Pages: 458-464
- NAID
  110007593689
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 圧潰特性に関する結合ハニカムの設計2010
- Author(s)
  陳玳〓, 岡田光, 牛島邦晴
- Journal Title
  
  設計工学
  
  Volume: 45 Pages: 343-350
- NAID
  10026793349
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 斜め方向からの圧縮荷重を受ける階段状の円筒の入り込み変形2010
- Author(s)
  陳玳〓, 牛島邦晴
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 76 Pages: 1178-1185
- NAID
  110007730353
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 接合部の孔によるT字型ジョイントのねじり強度への影響2010
- Author(s)
  陳玳〓, 渡辺剛史
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 76 Pages: 1178-1185
- NAID
  110007682099
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 圧縮荷重を受ける軽量Lattice構造の機械特性の評価(第3報,端部の拘束による機械特性への影響)2010
- Author(s)
  牛島邦晴, 陳玳〓, Wesley James CANTWEL
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 76 Pages: 860-867
- NAID
  110007685186
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 純曲げを受ける長方形角筒最大モーメントの予測2010
- Author(s)
  増田健一, 陳玳〓
- Journal Title
  
  日本機械学会論文集A編 76
  
  Pages: 26-33
- NAID
  110007521039
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 長さの影響を考慮した円筒の弾塑性純曲げ崩壊に関する研究2010
- Author(s)
  陳玳〓, 増田健一
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 76 Pages: 549-556
- NAID
  110007619412
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Evaluation of the Mechanical Properties of Lightweight Lattice Structures Subjected to Compressive Loading2010
- Author(s)
  Ushijima, K.Cantwell, W.J., Chen, D.H.
- Journal Title
  
  J.of Computational Science and Technology
  
  Volume: 4 Pages: 159-171
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] フロントサイドメンバの動的圧潰特性及び簡易ばねモデルの構築2010
- Author(s)
  陳玳〓, 近藤隆博
- Journal Title
  
  自動車技術会論文集
  
  Volume: 41 Pages: 811-816
- NAID
  130004515529
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Axial collapse behavior of plate2010
- Author(s)
  Chen, D.H., Ozaki, S
- Journal Title
  
  Thin-Walled Structures 48
  
  Pages: 77-88
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] フロントサイドメンバの動的圧潰特性及び簡易ばねモデルの構築2010
- Author(s)
  陳玳行, 近藤隆博
- Journal Title
  
  自動車技術会論文集
  
  Volume: Vol.41, No.4 Pages: 811-816
- NAID
  130004515529
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] ひずみ速度依存性を考慮した薄肉円筒の軸方向衝突における第一ピーク荷重2009
- Author(s)
  陳玳〓, 藤田昂史, 牛島邦晴
- Journal Title
  
  日本機械学会論文集A編 75
  
  Pages: 1476-1483
- NAID
  110007482696
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 圧縮荷重を受ける軽量 Lattice 構造の機械特性の評価(第1報, 圧縮初期の剛性と塑性崩壊応力に対する理論的評価)2009
- Author(s)
  牛島邦晴, Wesley James CANTWEL, 陳玳〓
- Journal Title
  
  日本機械学会論文集A編 75
  
  Pages: 572-579
- NAID
  110007226511
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] ひずみ速度依存性を考慮した薄肉円筒の軸方向衝突における第一ピーク荷重2009
- Author(s)
  陳玳行, 藤田昂史, 牛島邦晴
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 第75巻第759号 Pages: 1476-1483
- NAID
  110007482696
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Theoretical Analysis of Axial Crushing of Cylindrical Tubes with Corrugated Surfaces2009
- Author(s)
  Chen, D.H., Ozaki, S.
- Journal Title
  
  J.of Computational Science and Technology 3
  
  Pages: 327-338
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Circumferential strain concentration in axial crushing of cylindrical and square tubes with corrugated surfaces2009
- Author(s)
  Chen, D. H. and Ozaki, S.
- Journal Title
  
  Thin-Walled Structures
  
  Volume: Vol.47, No.5 Pages: 547-554
- NAID
  110006242562
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Numerical study of axially crushed cylindrical tubes with corrugated surfaces2009
- Author(s)
  Chen, D.H., Ozaki, S
- Journal Title
  
  Thin-Walled Structures 47
  
  Pages: 1387-1396
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Circumferential strain concentration in axial crushing of cylindrical and square2009
- Author(s)
  Chen, D.H., Ozaki, S.
- Journal Title
  
  Thin-Walled Structures 47
  
  Pages: 547-554
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 六角形ハニカムの弾性定数について2009
- Author(s)
  陳玳〓, 松本壮史
- Journal Title
  
  日本機械学会論文集A編 75
  
  Pages: 1021-1028
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Deformation Behavior for axial Crushing of Three-Fold Point Corner2009
- Author(s)
  Chen, D. H., Yoshida, S. and Ozaki, S.
- Journal Title
  
  Journal of Computational Science and Technology
  
  Volume: Vol.3, No.2 Pages: 426-436
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] パイプジョイント部の耐力に関する数値解析的検討2009
- Author(s)
  陳玳〓, 桑子寛
- Journal Title
  
  日本機械学会論文集A編 75
  
  Pages: 1508-1515
- NAID
  110007482700
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] ハニカムの曲げ剛性について(第2報, 板ねじりの理論解析に基づく曲げ剛性の解析)2009
- Author(s)
  陳玳〓
- Journal Title
  
  日本機械学会論文集A編 75
  
  Pages: 1694-1701
- NAID
  110007503865
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] McKibben 型アクチュエータの伸縮変形について2009
- Author(s)
  陳玳〓, 小林宏, 小山陽平
- Journal Title
  
  日本機械学会論文集A編 75
  
  Pages: 1500-1507
- NAID
  110007482699
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 左右非対称な六角形ハニカムの等価弾性定数の解析2009
- Author(s)
  陳玳〓, 松本壮史
- Journal Title
  
  日本機械学会論文集A編 75
  
  Pages: 410-416
- NAID
  110007226479
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 圧縮荷重を受ける軽量 Lattice 構造の機械特性の評価(第2報, 圧縮負荷方向の違いおよび不完全セルの存在による機械特性への影響)2009
- Author(s)
  牛島邦晴, Wesley James CANTWEL, 陳玳〓
- Journal Title
  
  日本機械学会論文集A編 75
  
  Pages: 1492-1499
- NAID
  110007482698
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Deformation Modes for Axial Crushing of Cylindrical Tubes Considering the Edge Effect2009
- Author(s)
  Chen, D.H., Masuda, K., Ushijima, K., Ozaki, S.
- Journal Title
  
  J.of Computational Science and Technology 3
  
  Pages: 339-350
- NAID
  110006404750
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Deformation Behavior for axial Crushing of Three-Fold Point Corner2009
- Author(s)
  Chen, D.H., Yoshida, S., Ozaki, S.
- Journal Title
  
  J.of Computational Science and Technology 3
  
  Pages: 426-436
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] 角筒純曲げに及ぼす隔壁の役割に関する研究2009
- Author(s)
  増田健一, 陳玳〓
- Journal Title
  
  日本機械学会論文集A編 75
  
  Pages: 580-587
- NAID
  110007226510
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Telescopic Deformation of Stepped Circular Tube Subjected to Axial Crushing2009
- Author(s)
  Chen, D.H., Tanaka, D., Ozaki, S.
- Journal Title
  
  J.of Computational Science and Technology 3
  
  Pages: 351-362
- NAID
  110006419390
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] ハニカムの曲げ剛性について(第1報, 基本的考え方)2009
- Author(s)
  陳玳〓, 松本壮史
- Journal Title
  
  日本機械学会論文集A編 75
  
  Pages: 1484-1491
- NAID
  110007482697
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] Axial Crushing Characteristics of Circular Tubes with Radial Corrugation2009
- Author(s)
  Chen, D.H., Hattori, K., Ozaki, S.
- Journal Title
  
  J.of Computational Science and Technology 3
  
  Pages: 437-448
- NAID
  110006453479
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560149
[Journal Article] ハニカム材における欠陥の応力集中2005
- Author(s)
  陳玳こう, 瀬藤良成
- Journal Title
  
  日本機械学会北陸信越支部第42期総会・講演会講演論文集 No.047-1
  
  Pages: 45-46
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560080
[Journal Article] 欠陥を持つハニカム構造の応力場の評価2003
- Author(s)
  陳玳こう, 木村祐介
- Journal Title
  
  M&M2003材料力学部門講演会講演論文集 No.03-11
  
  Pages: 1077-1078
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560080
[Journal Article] Evaluation of stress field for a honeycomb with a defect
- Author(s)
  D.Chen, Y.Kimura
- Journal Title
  
  Proceedings of the 2003 Annual Meeting of JSME/MMD No.03-11
  
  Pages: 1077-1078
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560080
[Journal Article] Stress concentration near a defect in honeycomb
- Author(s)
  D.Chen, Y.Seto
- Journal Title
  
  Proceedings of No.42 Annual Meeting of JSME Hokuriku-Shinetsu Branch No.047-1
  
  Pages: 45-46
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560080
[Presentation] 軸圧潰荷重を受ける圧縮膨張部材のエネルギー吸収効率2013
- Author(s)
  小銭　貴規，　春山　繁之，　上西　研，　陳　玳珩
- Organizer
  日本機械学会中国四国支部第 51 期総会・講演会
- Place of Presentation
  高知工科大学
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] Modes of Collapse of Compress_Expand Member under Axial Loading2013
- Author(s)
  Shigeyuki Haruyama, Aidil Khaidir Bin Muhamad, Ken Kaminishi, Dai-Heng Chen
- Organizer
  International Congress University of Science, Engineering and Technology
- Place of Presentation
  BARCELONA SPAIN
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] Modes of Collapse of Compress–Expand Member under Axial Loading2013
- Author(s)
  Shigeyuki Haruyama, Aidil Khaidir Bin Muhamad, Ken Kaminishi, and Dai-Heng Chen
- Organizer
  International Congress University of Science,Engineering and Technology
- Place of Presentation
  Chengdu,China
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] Study on the effect of geometric paramaeters towardsthe deformation modes of tubular members2012
- Author(s)
  Shigeyuki Haruyama, Aidil Khaidir Bin Muhamad, Ken Kaminishi, Dai-Heng Chen
- Organizer
  International Conference on Innovative Design and Manufacturing
- Place of Presentation
  Taipei,Taiwan
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] Study on the Deformation Modes of Axially Crushed Compact Impact Absorption Member2012
- Author(s)
  Shigeyuki Haruyama, Hiroyuki Tanaka, Dai-Heng Chen, Aidil Khaidir Bin Muhamad
- Organizer
  WORLD ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY
- Place of Presentation
  at Florence,Italy(ISSUE 62 pISSN 2010-376X eISSN 2010-3778)
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] Study on the Deformation Modes of Axially Crushed Compact Impact Absorption Member2012
- Author(s)
  Shigeyuki Haruyama,Hiroyuki Tanaka, Dai-Heng Chen, Aidil Khaidir Bin Muhamad
- Organizer
  ICAMAME 2012 : International Conference on Aerospace, Mechanical, Automotive and Materials Engineering
- Place of Presentation
  Florence‎ FI Italy
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] STUDY ON THE EFFECT OF GEOMETRIC PARAMETERS TOWARDS THE DEFORMATION MODES OF TUBULAR MEMBERS2012
- Author(s)
  Shigeyuki HARUYAMA ,Aidil Khaidir bin Muhamad. Ken KAMINISHI . Dai-Heng CHEN
- Organizer
  2012 ICIDM（International Conference on Innovative Design and Manufacturing
- Place of Presentation
  国立台湾大学（National Taiwan University） TAIWAN
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] 小型衝撃吸収部材の軸圧潰特性2011
- Author(s)
  春山繁之,陳玳珩,田中洋征
- Organizer
  日本機械学会M&M2011材料力学カンファレンス
- Place of Presentation
  九州工業大学戸畑キャンパス(北九州市)
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] Effect of Deformation Mode of Cylindrical Tubes with Corrugated Surface Dimensional Errors2011
- Author(s)
  Shigeyuki Haruyama, Daiheng Chen, Ken Kaminishi, Takuya Niyama
- Organizer
  The 8th International Conference on Innovation and Management (ICIM 2011)
- Place of Presentation
  Kokura,JAPAN
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] 小型衝撃吸収部材の軸圧潰特性2011
- Author(s)
  春山繁之，陳玳珩，田中洋征
- Organizer
  日本機械学会 M&M2011材料力学カンファレンス
- Place of Presentation
  九州工業大学、北九州市
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] Axially Crushed Characteristics of Compact Impact Absorption Member2011
- Author(s)
  Shigeyuki Haruyama, Hiroyuki Tanaka, Dai-Heng Chen, Aidil Khaidir
- Organizer
  The 8th International Conference on Innovation　and Management (ICIM 2011)
- Place of Presentation
  リーガロイヤルホテル、北九州市
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] Axially Crushed Characteristics of Compact Impact Absorption Member2011
- Author(s)
  Shigeyuki Haruyama, Hiroyuki Tanaka, Dai-Heng Chen, Aidil Khaidir
- Organizer
  The 8th International Conference on Innovation and Management (ICIM 2011)
- Place of Presentation
  Kokura,JAPAN
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] Effect of Deformation Mode of Cylindrical Tubes with Corrugated Surface Dimensional Errors2011
- Author(s)
  Shigeyuki Haruyama, Daiheng Chen, Ken Kaminishi, Takuya Niyama
- Organizer
  The 8th International Conference on Innovation　and Management (ICIM 2011)
- Place of Presentation
  リーガロイヤルホテル、北九州市
- Data Source
  KAKENHI-PROJECT-23560162
[Presentation] Estimation of Crack Based on Information Measured Around the Crack2009
- Author(s)
  Yang, L, Chen, D.H
- Organizer
  Proceedings of the Fifth International Conference on Information, pp.322-328
- Place of Presentation
  京都
- Data Source
  KAKENHI-PROJECT-21560149
[Presentation] Prediction of maximum moment of rectangular tubes subjected to pure bending2009
- Author(s)
  Masuda, K, Chen, D.H
- Organizer
  Proceedings of the 2nd International Symposium on Digital Manufacturing, pp.82-88
- Place of Presentation
  中国武漢
- Data Source
  KAKENHI-PROJECT-21560149
[Presentation] Study of the Horizontal Subgrade Reaction of Expressway Protective Guard Pillar2009
- Author(s)
  Yang, L, Chen, D.H, Xiao, B
- Organizer
  Proceedings of the 2nd International Symposium on Digital Manufacturing, pp.114-119
- Place of Presentation
  中国武漢
- Data Source
  KAKENHI-PROJECT-21560149
[Presentation] Estimation of Maximum Compressive Load for Circular Tubes under Axial Impact2009
- Author(s)
  Chen, D.H, Ushijima, K.
- Organizer
  Proceedings of the 2nd International Symposium on Digital Manufacturing, pp.95-101
- Place of Presentation
  中国武漢
- Data Source
  KAKENHI-PROJECT-21560149

1. HARUYAMA shigeyuki (10416505)

# of Collaborated Projects: 1 results

# of Collaborated Products: 23 results
2. ODA Yasuji (20091340)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
3. FUJISAKI Wataru (60238558)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. MORINO Kazuhiro (90099870)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. TANAKA Satoshi (40069547)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. NISHITANI Hironobu (20037708)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. OKUMURA Hiroyuki (00010679)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. KANEKO Kenji (40016803)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. MACHIDA Kenji (50089380)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. KIKUCHI Masanori (90107540)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. NAKASONE Yuuji (10266918)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. 野田尚昭 (40172796)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. 中島克宣

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

CHEN Dai-heng 陳 ダイコウ

陳 玳こう チン ダイコウ

CHEN Daiheng 陳 玳〓

陳 玳[コウ] チン ダイコウ

陳 玳ユウ チン ダイユウ

陳 玳〓 チン ダイコウ

Research Projects

Research Products

Co-Researchers

Development of load-displacement control frame of the wedge-shaped shock absorbing member

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of cast collision absorption partsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of the evaluation method on the strength of I type structure with an interface crackPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Basic study of the strength evaluation of honeycomb structure which has an adhesion defectPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on the meso-scopic fracture mechanics based on the non-uniform micro-mechanism of metals.

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Strength Evaluation Based on Singular Stress Field Around Interface of Jointed Dissimilar MaterialsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

In-situ observation rig using a scanning laser microscope and its application to the COD measurement of fatigue crack (Unifying the measure of severity controlling the crack growth rate in small and large cracks)

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Detection of a crack based on the data of strainsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

破壊力学および人工知能援用によるき裂位置および形状のオンライン測定Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Implementing ALD in Product Development : The Effect of Geometrical Dimensions on Tubular Member Deformation2013

Author(s)

Journal Title

Data Source

[Journal Article] Modes of Collapse of Compress_Expand Member under Axial Loading2013

Author(s)

Journal Title

Data Source

[Journal Article] Implementing ALD in Product Development: The Effect of Geometrical Dimensions on Tubular Member Deformation2013

Author(s)

Journal Title

Data Source

[Journal Article] Modes of Collapse of Compress–Expand Member under Axial Loading2013

Author(s)

Journal Title

Data Source

[Journal Article] Study on the Deformation Modes of an Axially Crushed Compact Impact Absorption Member2012

CHEN Dai-heng 陳ダイコウ

陳玳こうチンダイコウ

CHEN Daiheng 陳玳〓

陳玳[コウ] チンダイコウ

陳玳ユウチンダイユウ

陳玳〓チンダイコウ