Yanagimoto Jun 柳本潤

… Alternative Names

YANAGIMOTO Jun 柳本潤

Less

Researcher Number	90220194
Other IDs
Affiliation (Current)	2025: 東京大学, 大学院工学系研究科(工学部), 教授
Affiliation (based on the past Project Information) *help	2018 – 2024: 東京大学, 大学院工学系研究科(工学部), 教授 2010 – 2017: 東京大学, 生産技術研究所, 教授 2004 – 2007: 東京大学, 生産技術研究所, 教授
Review Section/Research Field	Principal Investigator Material processing/treatments / Production engineering/Processing studies / Medium-sized Section 26:Materials engineering and related fields / Material processing/Microstructural control engineering / Science and Engineering Except Principal Investigator Science and Engineering
Keywords	Principal Investigator 複合材料 / サンドイッチ成形 / 構造最適化 / CFRP薄板 / 金属薄板 / 超軽量構造 / 温間成形 / 工業的適用 / ハイブリッドジョイニング / 内部組織最適化 … More / 合金設計 / 高強度鋼板 / 製造加工 / 熱間成形 / 繊維強化樹脂 / 三次元周期コア / 3Dプリンタ / トポロジー最適化 / ３次元周期コア / 金属シート / Conductivity / Mechanical properties / Controlled cooling / Extrusion / Carboon nanotube / Composite material / Ultrafine-grained steel / Severe plastic deformation / ECAP法 / ARB法 / 超微細粒鋼 / 組織制御 / 押出し / 冷間鍛造性 / 冷間圧縮試験 / 引張試験 / 内部組織変化 / 低温熱間加工 / フェライト組織微細化 / 一発創成 / スーパーファイン / 機能素材 / EBSP / フェライト組織 / 微細結晶粒 / 鉄鋼材料 / 1パス強加工 / 導電性 / 機械的特性 / 制御冷却 / 押出し加工 / カーボンナノチューブ / 超微細粒鉄鋼材料 / 超強加工 / 層構造設計 / マルチスケール解析 / 極限軽量構造 / 成形加工 / 遺伝的アルゴリズム / 成形性試験法 / 連続薄板化 / 温間圧延・成形 / 炭素繊維強化複合材料 / 接合 / 軽量構造 / 高温成形 / スプリングバック / 板成形 / 成形性 / 薄板接合 / 異材接合 / CFRP / 成形性向上 / ステンレス鋼板 / 薄板成形 / 材料試験 / 物理シミュレーション / 数値シミュレーション / 材料強度 / 強ひずみ加工 / バルク材料 / ナノ構造 / 金属組織制御 … More Except Principal Investigator 共通試料 / 成果発信 / 連携 / 結晶粒界 / 超微細粒 / ナノ結晶 / 構造用金属材料 / 延性 / 強度 / 粒界 / 転位 / 力学特性 / バルクナノメタル / 社会基盤構造材料 / 構造・機能材料 Less

Design and fabrication of multilayered sheet by metallic face and composite core with three-dimensional periodic structurePrincipal Investigator
- Principal Investigator
  
  柳本潤
- Project Period (FY)
  2020 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Review Section
  
  Medium-sized Section 26:Materials engineering and related fields
- Research Institution
  The University of Tokyo
Physical and Numerical Simulation of Hot Stamping for Hybrid Steel-Composite Lightweigh t BodiesPrincipal Investigator
- Principal Investigator
  
  柳本潤
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for JSPS Fellows
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  The University of Tokyo
Manufacturing ULCs (Ultra-Lightweight constructions) of thermosetting continuous CFRP by continuous production of strip, forming at 100 degree Celsius, and joining by plastic deformationPrincipal Investigator
- Principal Investigator
  
  Yanagimoto Jun
- Project Period (FY)
  2014 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  The University of Tokyo
Management of Collaborative Research Works within the Bulk Nanostructure Metals Project
- Principal Investigator
  
  TSUJI Nobuhiro
- Project Period (FY)
  2010 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
- Review Section
  
  Science and Engineering
- Research Institution
  Kyoto University
Physical and Numerical Simulations on the Formation of Bulk-nanostructured MetalsPrincipal Investigator
- Principal Investigator
  
  YANAGIMOTO Jun
- Project Period (FY)
  2010 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
- Review Section
  
  Science and Engineering
- Research Institution
  The University of Tokyo
Precise Springback-free Forming of High Specific Strength Sheet for Realizing Ultra-Lightweight ConstructionPrincipal Investigator
- Principal Investigator
  
  YANAGIMOTO Jun
- Project Period (FY)
  2010 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  The University of Tokyo
Single-pass severe plastic forming to manufacture products with superfine functionsPrincipal Investigator
- Principal Investigator
  
  YANAGIMOTO Jun
- Project Period (FY)
  2004 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  The University of Tokyo

[Journal Article] Additive manufacturing assisted fabrication of octet truss structures using continuous carbon fibre composites and the resulting mechanical responses2023
- Author(s)
  Zhang Jingwei、Zhao Tianhao、Yi Yushi、An Qinglong、Yanagimoto Jun
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 319 Pages: 118089-118089
- DOI
  10.1016/j.jmatprotec.2023.118089
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H00300
[Journal Article] Integral forming of continuous CFRP sandwich sheet by additive manufacturing2023
- Author(s)
  Nishi Kazusa、Sato Yuji、Yanagimoto Jun
- Journal Title
  
  International Journal of Material Forming
  
  Volume: 16 Issue: 6
- DOI
  10.1007/s12289-023-01788-7
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H00300
[Journal Article] Improving the formability of sandwich sheets by the hydrostatic effect of encapsulated media2023
- Author(s)
  Shibuya Yuki、Yanagimoto Jun
- Journal Title
  
  International Journal of Material Forming
  
  Volume: 16 Issue: 4
- DOI
  10.1007/s12289-023-01768-x
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H00300
[Journal Article] Enhancement of mechanical property and formability of CFRP core sandwich sheets by additive manufacturing process-induced material and structural anisotropies2022
- Author(s)
  Shibuya Yuki、Zhang Jingwei、Sato Yuji、Yanagimoto Jun
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 310 Pages: 117778-117778
- DOI
  10.1016/j.jmatprotec.2022.117778
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H00300
[Journal Article] Evaluation of the mechanical properties and deformability of metal-based composite sheets made of thin stainless-steel sheets and carbon fiber reinforced plastics2022
- Author(s)
  Shibuya Yuki、Zhang Jingwei、Sato Yuji、Yanagimoto Jun
- Journal Title
  
  International Journal of Material Forming
  
  Volume: 15 Issue: 4 Pages: 47-47
- DOI
  10.1007/s12289-022-01661-z
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H00300
[Journal Article] Bending properties of sandwich sheets with metallic face sheets and additively manufactured 3D CFRP lattice cores2022
- Author(s)
  Zhang Jingwei、Ding Sheng、Yanagimoto Jun
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 300 Pages: 117437-117437
- DOI
  10.1016/j.jmatprotec.2021.117437
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H00300, KAKENHI-PROJECT-21J11337
[Journal Article] Density-based topology optimization integrated with genetic algorithm for optimizing formability and bending stiffness of 3D printed CFRP core sandwich sheets2021
- Author(s)
  Zhang Jingwei、Yanagimoto Jun
- Journal Title
  
  Composites Part B: Engineering
  
  Volume: 225 Pages: 109248-109248
- DOI
  10.1016/j.compositesb.2021.109248
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H00300, KAKENHI-PROJECT-21J11337
[Journal Article] Mechanical properties and cold and warm forming characteristics of sandwich sheets with a three-dimensional CFRTP core2021
- Author(s)
  Zhang Jingwei、Taylor Tom、Yanagimoto Jun
- Journal Title
  
  Composite Structures
  
  Volume: 269 Pages: 114048-114048
- DOI
  10.1016/j.compstruct.2021.114048
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H00300, KAKENHI-PROJECT-21J11337
[Journal Article] Topology optimization of CFRP hierarchical pyramidal structures fabricated by additive manufacturing2021
- Author(s)
  Zhang Jingwei、Yanagimoto Jun
- Journal Title
  
  Composites Part B: Engineering
  
  Volume: 224 Pages: 109241-109241
- DOI
  10.1016/j.compositesb.2021.109241
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H00300, KAKENHI-PROJECT-21J11337
[Journal Article] Topology optimization of microlattice dome with enhanced stiffness and energy absorption for additive manufacturing2021
- Author(s)
  Zhang Jingwei、Yanagimoto Jun
- Journal Title
  
  Composite Structures
  
  Volume: 255 Pages: 112889-112889
- DOI
  10.1016/j.compstruct.2020.112889
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H00300
[Journal Article] Rapid fabrication of 3D CFRP parts by hot forming of pre-cured CFRP sheets2021
- Author(s)
  Zhang Jingwei、Taylor Tom、Shukla Love、Yanagimoto Jun
- Journal Title
  
  Composite Structures
  
  Volume: 268 Pages: 113942-113942
- DOI
  10.1016/j.compstruct.2021.113942
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H00300, KAKENHI-PROJECT-21J11337
[Journal Article] Homogenization-based topology optimization integrated with elastically isotropic lattices for additive manufacturing of ultralight and ultrastiff structures2021
- Author(s)
  Zhang Jingwei、Sato Yuji、Yanagimoto Jun
- Journal Title
  
  CIRP Annals
  
  Volume: 70 Issue: 1 Pages: 111-114
- DOI
  10.1016/j.cirp.2021.04.019
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H00300, KAKENHI-PROJECT-21J11337
[Journal Article] Homogenization-based topology optimization integrated with elastically isotropic lattices for additive manufacturing of ultralight and ultrastiff structures2021
- Author(s)
  Zhang Jingwei、Sato Yuji、Yanagimoto Jun
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 70/1
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H00300
[Journal Article] Design and fabrication of formable CFRTP core sandwich sheets2019
- Author(s)
  Jingwei Zhang and Jun Yanagimoto
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: Vol.68/1
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26249109
[Journal Article] Evaluation of a concept out-of-autoclave process for manufacturing carbon fibre reinforced polymer automotive parts2019
- Author(s)
  T. Taylor, J. Zhang, J. Yanagimoto
- Journal Title
  
  Procedia CIRP
  
  Volume: 86 Pages: 162-166
- DOI
  10.1016/j.procir.2020.01.030
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17F17067
[Journal Article] Effect of unidirectional prepreg size on punching of pseudo-ductile CFRP laminates and CFRP/metal hybrid composites2018
- Author(s)
  Ho Yu-Chien、Yanagimoto Jun
- Journal Title
  
  Composite Structures
  
  Volume: 186 Pages: 246-255
- DOI
  10.1016/j.compstruct.2017.11.042
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26249109
[Journal Article] Mechanical Properties and Drawing Process of Multilayer Carbon Fiber Reinforced Plastic (CFRP) Sheet with Various Prepreg Thickness2017
- Author(s)
  Yu-Chien HO, Hideki. SASAYAMA, Jun. YANAGIMOTO
- Journal Title
  
  Advances in Mechanical Engineering
  
  Volume: 9-(3) Issue: 3 Pages: 1-12
- DOI
  10.1177/1687814017692695
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26249109
[Journal Article] Optimum Design of Formable CFRP Sheets by Generic Algorithm and FE Analysis by Homogenization of Multilayered Structure with Macroscopic Anisotropy2016
- Author(s)
  Yuma TAKAHASHI, Yu URIYA, Jun YANAGIMOTO
- Journal Title
  
  International Journal of Material Forming
  
  Volume: 9-5 Issue: 5 Pages: 697-703
- DOI
  10.1007/s12289-015-1260-9
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26249109
[Journal Article] Suitable structure of thermosetting CFRP sheet for cold/warm forming2015
- Author(s)
  Yu URIYA,Jun YANAGIMOTO
- Journal Title
  
  International Journal of Material Forming
  
  Volume: 巻なし Issue: 2 Pages: 1-10
- DOI
  10.1007/s12289-015-1227-x
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26249109
[Journal Article] Separation Technology of Tramp Elements in Aluminium Alloy Scrap by Semisolid Processing2015
- Author(s)
  Thet Thet Cho, Y. Meng, S. Sugiyama and J. Yanagimoto
- Journal Title
  
  International Journal of Precision Engineering and Manufacturing
  
  Volume: Vol. 16 Issue: 1 Pages: 177-183
- DOI
  10.1007/s12541-015-0023-3
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Cold Formability of AZ31 Wrought Magnesium Alloy Undergoing Semisolid Spheroidization Treatment2015
- Author(s)
  Y.Meng, S. Fukushima, S.Sugiyama and J.Yanagimoto
- Journal Title
  
  Materials Science and Engineering A
  
  Volume: 624 Pages: 148-156
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-ORGANIZER-22102001
[Journal Article] Cold Formability of AZ31 Wrought Magnesium Alloy Undergoing Semisolid Spheroidization Treatment2015
- Author(s)
  Y.Meng, S. Fukushima, S.Sugiyama and J.Yanagimoto
- Journal Title
  
  Materials Science and Engineering
  
  Volume: Vol.624 Pages: 148-156
- DOI
  10.1016/j.msea.2014.11.083
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Refinement of Cast Cr-V-Mo Steel by Using Recrystallization and Partial Melting Method and Post Heat Treatments2014
- Author(s)
  Y.Meng, S.Sugiyama and J.Yanagimoto
- Journal Title
  
  Procedia Engineering
  
  Volume: Vol.81 Pages: 1571-1576
- DOI
  10.1016/j.proeng.2014.10.192
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Applicability of Adhesive Embossing Hybrid Joining Process to Glass-Fiber-Reinforced Plastic and Metallic Thin Sheets2014
- Author(s)
  Z.Q. Huang, S. Sugiyama and J. Yanagimoto
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: in press Issue: 10 Pages: 2018-2028
- DOI
  10.1016/j.jmatprotec.2013.11.020
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22246093, KAKENHI-PROJECT-26249109
[Journal Article] Microstructure of Cr–V–Mo Steel Processed by Recrystallization and Partial Melting and Its Effect on Mechanical Properties2014
- Author(s)
  Y.Meng, S.Sugiyama and J.Yanagimoto
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 55 Issue: 6 Pages: 921-929
- DOI
  10.2320/matertrans.M2013398
- NAID
  130004455316
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Enhanced formability of thin carbon fiber reinforced plastic sheets in cold/warm embossing with ductile dummy sheets of different thicknesses2014
- Author(s)
  Yu URIYA, Katsuyoshi IKEUCHI, Jun YANAGIMOTO
- Journal Title
  
  International Journal of Material Forming
  
  Volume: 巻なし Issue: 3 Pages: 1-7
- DOI
  10.1007/s12289-014-1184-9
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26249109
[Journal Article] Effects of Forming Conditions on Homogeneity of Microstructure and Mechanical Properties of A6061 Aluminum Alloy Manufactured by Time-Dependent Rheoforging on a Mechanical Servo Press2014
- Author(s)
  Y.Meng, S.Sugiyama, J.Tan and J.Yanagimoto
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: Vol.214 Issue: 12 Pages: 3037-3047
- DOI
  10.1016/j.jmatprotec.2014.07.014
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Effect of initial notch orientation on fracture toughness in fail-safe steel2013
- Author(s)
  T. Inoue, A. Yanagida, J. Yanagimoto
- Journal Title
  
  Journal of Materials Ssience
  
  Volume: 48 Issue: 13 Pages: 4766-4772
- DOI
  10.1007/s10853-012-6874-4
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102005, KAKENHI-PROJECT-23360312
[Journal Article] Experiments on and Finite Element Analyses of the Tilting of Fine Steel Wire in Roller Die Drawing2013
- Author(s)
  M. Asakawa, H. Shigeta, A. Shimizu, I. Tirtom, J. Yanagimoto
- Journal Title
  
  ISIJ International
  
  Volume: 53 Issue: 10 Pages: 1850-1857
- DOI
  10.2355/isijinternational.53.1850
- NAID
  130003383810
- ISSN
  0915-1559, 1347-5460
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Numerical Simulation of Ultrafine Grain Generation in Super Short Interval Multi-pass Rolling Process2013
- Author(s)
  S. Fukushim, K. Miyata, M. Etou A. Yanagida, J. Yanagimoto
- Journal Title
  
  Journal of the Japan Society for Technology of Plasticity
  
  Volume: 54 Pages: 148-152
- NAID
  10031139523
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Controlled Semisolid Forging of Aluminium Alloys Using Mechanical Servo Press to Manufacture Products with Homo- and Heterogeneous Microstructures2013
- Author(s)
  J. Yanagimoto, Jian-Bo Tan, S. Sugiyama, Y. Meng
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 54 Issue: 7 Pages: 1149-1154
- DOI
  10.2320/matertrans.M2013098
- NAID
  10031183660
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Cross-Sectional Distributions of Mechanical Properties of Fine Cu–Sn Alloy Wire Manufactured by Continuous Rotary Draw Bending2013
- Author(s)
  J. Tokutomi, K. Hanazaki, N. Tsuji, J. Yanagimoto
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 54 Issue: 9 Pages: 1634-1641
- DOI
  10.2320/matertrans.MH201323
- NAID
  10031194648
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-22102001, KAKENHI-PLANNED-22102005
[Journal Article] CFRP薄板の冷間・温間V曲げ成形2013
- Author(s)
  池内健義，柳本潤
- Journal Title
  
  塑性と加工
  
  Volume: 54 Pages: 973-977
- NAID
  10031203764
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22246093
[Journal Article] Finite element simulation of accumulative roll-bonding process2013
- Author(s)
  T. Inoue, A. Yanagida, J. Yanagimoto
- Journal Title
  
  Materials Letters
  
  Volume: 106 Pages: 37-40
- DOI
  10.1016/j.matlet.2013.04.093
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Effects of Heat Treatment on Microstructure and Mechanical Properties of Cr-Effects of Heat Treatment on Microstructure and Mechanical Properties of Cr-V-Mo Steel Processed by Recrystallization and Partial Melting Method2013
- Author(s)
  Y. Meng, S. Sugiyama , J. Yanagimoto
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 214 Issue: 01 Pages: 87-96
- DOI
  10.4149/km_2013_1_83
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Hybrid Joining Process for Carbon Fiber Reinforced Thermosetting Plastic and Metallic Thin Sheets by Chemical Bonding and Plastic Deformation2013
- Author(s)
  Z.Q. Huang, S. Sugiyama and J. Yanagimoto
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 213 Issue: 11 Pages: 1864-1874
- DOI
  10.1016/j.jmatprotec.2013.04.015
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22246093
[Journal Article] Changes in Mechanical Characteristics of Pre-Annealed Wires of Cu–Sn Alloy Manufactured by Continuous Draw Bending2012
- Author(s)
  J.Tokutomi, K.Hanazaki, N.Tsuji, I.Yanagimoto
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 53 Issue: 1 Pages: 116-122
- DOI
  10.2320/matertrans.MD201114
- NAID
  130004454828
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-22102001, KAKENHI-PLANNED-22102002, KAKENHI-PLANNED-22102005
[Journal Article] Novel Process for Fabricating Ultrafine Grained Copper Wire Having High Tensile Ductility and High Electric Conductivity2012
- Author(s)
  K.Hanazaki, J.Tokutomi, I.Yanagimoto, N.Tsuji
- Journal Title
  
  Mater.Sci.Eng.A
  
  Volume: 534 Pages: 720-723
- DOI
  10.1016/j.msea.2011.12.030
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-22102001, KAKENHI-PLANNED-22102002, KAKENHI-PROJECT-24246114
[Journal Article] Interrupt Shearing Test for Evaluating Effect of Large Shear Deformation on Evolution of Microstructure into Ultrafine Grains2012
- Author(s)
  J.Yanagimoto, S.Sugiyama, S.Kawando, A.Yanagida
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 53 Issue: 1 Pages: 2-7
- DOI
  10.2320/matertrans.MD201119
- NAID
  130004454840
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] ホットスタンピング加工特性の高精度評価手法2012
- Author(s)
  池内健義・柳本潤
- Journal Title
  
  生産研究
  
  Volume: 64 Pages: 75-82
- NAID
  130002100870
- Data Source
  KAKENHI-PROJECT-22246093
[Journal Article] Significant Change in Mechanical Properties of Deep Drawn Ultrafine Grained Copper Wire by Additional Deformation2012
- Author(s)
  K.Hanazaki, J.Tokutomi, J.Yanagimoto, N.Tsuji
- Journal Title
  
  Materials Science and Engineering A
  
  Volume: VOL.534 Pages: 720-723
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Ferrite Transformation Kinetics of Severely Hot-Deformed Austenite2012
- Author(s)
  A.Yanagida, J.Liu, J.Yanagimoto
- Journal Title
  
  Materials Science Forum
  
  Volume: VOL.706-709 Pages: 1562-1567
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Sheet Forming Process of Carbon Fiber Reinforced Plastics for Lightweight Parts2012
- Author(s)
  Yanagimoto, J., Ikeuchi, K
- Journal Title
  
  CIRP Annals-Manufacturing Technology
  
  Volume: 61(掲載確定) Issue: 1 Pages: 247-250
- DOI
  10.1016/j.cirp.2012.03.129
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22246093
[Journal Article] Continuous Bending-Drawing Process to Manufacture the Ultrafine Copper Wire with Excellent Electrical and Mechanical Pronperties2011
- Author(s)
  J.Yanagimoto, J.Tokutomi, K.Hanazaki, N.Tsuji
- Journal Title
  
  CIRP Annals Manufacturing Technology
  
  Volume: 60 Issue: 1 Pages: 279-282
- DOI
  10.1016/j.cirp.2011.03.148
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-22102001, KAKENHI-PLANNED-22102002, KAKENHI-PLANNED-22102005
[Journal Article] Bending-Drawing Process to Manufacture the Ultrafine Copper Wire with Excellent Electrical and Mechanical Properties2011
- Author(s)
  J.Yanagimoto, J.Tokutomi, K.Hanazaki, N.Tsuji
- Journal Title
  
  Annals of the CIRP manufacturing technology
  
  Volume: 60-1(in press(掲載確定))
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102005
[Journal Article] Valuation Method for Effects of Hot Stamping Process Parameters on Product Properties Using Hot Forming Simulator2011
- Author(s)
  Ikeuchi, K., Yanagimoto, J.
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 211-8 Pages: 1441-1447
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22246093
[Journal Article] Valuation Method for Effects of Hot Stamping Process Parameters on Product PropertiesUsing Hot Forming Simulator2011
- Author(s)
  K.Ikeuchi, J.Yanagimoto
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: in press
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22246093
[Journal Article] Characterization of Die Quenching Process by Water-Cooled Dies and High-PrecisionCompression Testing machine2010
- Author(s)
  K.Ikeuchi, J.Yanagimoto
- Journal Title
  
  Steel Research International
  
  Volume: 81-89 Pages: 869-871
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22246093
[Journal Article] Single-pass Severe Plastic Forming of Ultrafine-grained Plain carbon Steel2008
- Author(s)
  K. Nagato, S. Sugiyama, A. Yanagida and J. Yanagimoto
- Journal Title
  
  Materials Science and Engineering A (Elsevier) 476
  
  Pages: 376-383
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16360357
[Journal Article] Single-pass Severe Plastic Forming of Ultrafine-grained Plain Carbon Stell2008
- Author(s)
  K. Nagato, S. Sugiyama, A. Yanagida, J. yanagimoto
- Journal Title
  
  Material Science and Engineering A Vol.476
  
  Pages: 376-383
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360357
[Journal Article] 1パス熱間強加工による超微細鉄鋼材料の一発創成 (第3報 1パス加工微細組織鉄鋼材料の機械的特性)2006
- Author(s)
  柳本潤, 長藤圭介
- Journal Title
  
  平成18年度塑性加工春季講演会講演論文集
  
  Pages: 331-332
- Data Source
  KAKENHI-PROJECT-16360357
[Journal Article] 1パス熱間強加工による超微細鉄鋼材料の一発創成 (第2報低温大歪み速度加工の内部組織に対する影響)2006
- Author(s)
  柳本潤, 長藤圭介
- Journal Title
  
  平成18年度塑性加工春季講演会講演論文集
  
  Pages: 329-330
- Data Source
  KAKENHI-PROJECT-16360357
[Journal Article] 1パス熱間強加工による超微細鉄鋼材料の一発創成2005
- Author(s)
  柳本潤, 長藤圭介
- Journal Title
  
  平成17年度塑性加工連合講演会論文集
  
  Pages: 355-356
- Data Source
  KAKENHI-PROJECT-16360357
[Patent] Forming Method of Fiber Reinforced Composite Sheet2012
- Inventor(s)
  柳本潤, 池内健義
- Industrial Property Rights Holder
  東京大学、生産技術研究奨励会
- Industrial Property Rights Type
  特許
- Filing Date
  2012-06-12
- Overseas
- Data Source
  KAKENHI-PROJECT-22246093
[Patent] 繊維強化複合板の成形方法2012
- Inventor(s)
  柳本潤・池内健義
- Industrial Property Rights Holder
  東京大学
- Industrial Property Number
  2012-069470
- Filing Date
  2012-03-26
- Data Source
  KAKENHI-PROJECT-22246093
[Patent] 繊維強化複合板の成形方法2011
- Inventor(s)
  柳本潤・池内健義
- Industrial Property Rights Holder
  東京大学
- Industrial Property Number
  2011-173682
- Filing Date
  2011-08-09
- Data Source
  KAKENHI-PROJECT-22246093
[Presentation] Additive Manufacturingを用いた連続繊維CFRPサンドイッチシートの一体成形2023
- Author(s)
  西和翼、佐藤悠治、柳本潤
- Organizer
  日本塑性加工学会　第74回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-20H00300
[Presentation] マルチパス圧延によるCFRPラミネートの新しい製造方法2022
- Author(s)
  SETYAWAN Dani、渋谷祐紀、西和翼、佐藤悠治、柳本潤
- Organizer
  日本塑性加工学会第73回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-20H00300
[Presentation] ステンレスフェイスシートとCFRPコアからなるサンドイッチ構造の設計と評価2022
- Author(s)
  渋谷祐紀、張敬偉、佐藤悠治、柳本潤
- Organizer
  日本塑性加工学会第73回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-20H00300
[Presentation] ステンレス／CFRPハイブリッド薄板構造の接合強度に基づく決定2022
- Author(s)
  柳本潤、中嶋亮太朗
- Organizer
  日本鉄鋼協会第184回秋季講演大会
- Data Source
  KAKENHI-PROJECT-20H00300
[Presentation] 積層造形された弾性等方性格子とメタルシートからなる超軽量・超剛性構造の均質化法によるトポロジー最適化2021
- Author(s)
  張　敬偉、柳本　潤
- Organizer
  2021年度第72回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-20H00300
[Presentation] サンドイッチシートの形状と成形工具の形状がCFRTPコアサンドイッチシートの成形性に及ぼす影響2019
- Author(s)
  張　敬偉、柳本　潤
- Organizer
  2019年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-26249109
[Presentation] Out-of-autoclave method for fabricating partially cured formable CFRP thin sheets and its evaluation2019
- Author(s)
  Love Shukla and Jun Yanagimoto
- Organizer
  2019年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-26249109
[Presentation] 塑性加工可能なCFRTPコアメタルサンドイッチシートの設計と製作2018
- Author(s)
  張　敬偉、柳本　潤
- Organizer
  平成30年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-26249109
[Presentation] 超音波粉末混合/熱間押出し複合プロセスによるグラフェン分散強化型A6061基複合材料の作製2018
- Author(s)
  謝　政庭、柳本　潤
- Organizer
  平成30年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-26249109
[Presentation] 塑性加工について(金属およびCFRP薄板のプレス成形概論）2015
- Author(s)
  柳本　潤
- Organizer
  JSAE Forum　自動車技術会
- Place of Presentation
  東京大学本郷キャンパス（東京都）
- Year and Date
  2015-09-29
- Invited
- Data Source
  KAKENHI-PROJECT-26249109
[Presentation] Cold and warm V-bending test for carbon-fiber-reinforced plastic sheet2014
- Author(s)
  Yu URIYA,Jun YANAGIMOTO
- Organizer
  11th International Conference on Technology of Plasticity, ICTP 2014
- Place of Presentation
  Nagoya Congress Center, Nagoya, Japan
- Year and Date
  2014-10-22
- Data Source
  KAKENHI-PROJECT-26249109
[Presentation] Adhesive-embossing Hybrid Joining Process to Fiber-reinforced Thermosetting Plastic and Metallic Thin Sheets2014
- Author(s)
  Zhequn HUANG, Sumio SUGIYAMA and Jun YANAGIMOTO
- Organizer
  11th International Conference on Technology of Plasticity, ICTP 2014
- Place of Presentation
  Nagoya Congress Center, Nagoya, Japan
- Year and Date
  2014-10-21
- Data Source
  KAKENHI-PROJECT-26249109
[Presentation] Physical Simulation on the Effect of Large Shear Deformation on the Evolution of Microstructure2012
- Author(s)
  J. Yanagimoto
- Organizer
  The Proceedings of the 2012 Japanese Spring Conference for the Technology of Plasticity
- Place of Presentation
  Komatsu, JAPAN
- Year and Date
  2012-06-07
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] Physical and Numerical Simulation for Evaluating the Effect of Large Shear Deformation on the Evolution of Microstructure2012
- Author(s)
  J. Yanagimoto
- Organizer
  Proceedings of the International Workshop on Bulk Nanostructured Metals, pp.21-25
- Place of Presentation
  Kyoto, JAPAN
- Year and Date
  2012-06-26
- Invited
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] Sheet Forming Process of Carbon Fiber Reinforced Plastics for Lightweight Parts2012
- Author(s)
  Ikeuchi, K., Yanagimoto, J.
- Organizer
  The 4th GMSI International Symposium
- Place of Presentation
  東京大学(東京都文京区)
- Year and Date
  2012-03-02
- Data Source
  KAKENHI-PROJECT-22246093
[Presentation] CFRP薄板の冷間・温間V曲げ成形2011
- Author(s)
  柳本潤・池内健義
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  ホテル日航豊橋(愛知県豊橋市)
- Year and Date
  2011-10-29
- Data Source
  KAKENHI-PROJECT-22246093
[Presentation] Ferrite Transformation Kinetics of Severely Hot-Deformed Austenite2011
- Author(s)
  A.Yanagida, T.Liu, J.Yanagimoto
- Organizer
  International Conference on Process and Manufacturing of Advanced Materials
- Place of Presentation
  Quebec City, Canada(Invited)
- Year and Date
  2011-08-04
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] Physical Simulation on the Effect of Large Shear Deformation on the Evolution of Microstruchure2011
- Author(s)
  J.Yanagimoto, S.Kawanao, H.Mao
- Organizer
  The Proceeding of the 62nd Japanese Joint Conference for the Technology of Plasticity
- Place of Presentation
  ホテル日航豊橋(愛知県)
- Year and Date
  2011-10-29
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] Springback of Ultra-Thin Stainless Steel Sheet after Cold and Warm Forming2011
- Author(s)
  Ikeuchi, K., Waki, Y., Waki, T., Ikuta, S., Shikazono, N., Yanagimoto, J.
- Organizer
  10th International Conference on Technology of Plasticity, ICTP 2011
- Place of Presentation
  Germany, Aachen, Eurogress Convention Center
- Year and Date
  2011-09-29
- Data Source
  KAKENHI-PROJECT-22246093
[Presentation] 極薄ステンレス板の冷間・温間成形におけるスプリングバック(第2報)2011
- Author(s)
  池内健義・和気靖人・和気庸人・生田四朗・鹿園直毅・柳本潤
- Organizer
  第42回塑性加工春季講演会
- Place of Presentation
  早稲田大学理工学部(東京都新宿区)
- Year and Date
  2011-05-22
- Data Source
  KAKENHI-PROJECT-22246093
[Presentation] Simulation for Microstructural Evolution and Deformation Resistance of Nb Microalloyed Steels during Hot Rolling2011
- Author(s)
  M.Kihara, K.Ohara, J.Yanagimoto
- Organizer
  Steel Research International Special Edition : 10th International Conference on Technology of Plasticity
- Place of Presentation
  Aachen, Germany
- Year and Date
  2011-09-26
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] Physical Simulation on the Effect of Large Shear Deformation on The Evolution of Microstructure2011
- Author(s)
  J.Yanagimoto, S.Sugiyama, S.Kawando
- Organizer
  The Proceedings of The 2011 Japanese Spring Conference for The Technology of Plasticity
- Place of Presentation
  早稲田大学西早稲田キャンパス(東京都)
- Year and Date
  2011-05-29
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] 各種金属薄板の冷間・温間成形におけるスプリングバック2011
- Author(s)
  池内健義・朴亨原・柳本潤
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  ホテル日航豊橋(愛知県豊橋市)
- Year and Date
  2011-09-29
- Data Source
  KAKENHI-PROJECT-22246093
[Presentation] Physical Simulation on the Evolution of Microstructure after Severe Shear Deformation2011
- Author(s)
  J.Yanagimoto, S.Kawando
- Organizer
  Collected Abstracts of 2011 Autumn Meeting of The Japan Institute of Metals
- Place of Presentation
  沖縄コンベンションセンター(沖縄県)
- Year and Date
  2011-07-09
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] Material Data for the Analysis of Microstructural Evolution in the Hot Forming of SKD61 Steel2010
- Author(s)
  M.Soltanpour, J.Yanagimoto
- Organizer
  The Proceeding of the 61th Japanese Joint Conference for the Technology of Plasticity
- Place of Presentation
  Yamagata, Japan
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] Macro-micro Combined Texture Evolution Model for Hot Strip with High Reduction Rolling2010
- Author(s)
  T.Morimoto, J.Yanagimoto, F.Yoshida, Y.Kasumoto, O.Akisue
- Organizer
  Proceeding of the 10th International Conference on Steel Rolling
- Place of Presentation
  Beijing, China
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] Sintering Extrusion to Manufacture CNT-A6061 composites2008
- Author(s)
  T. uemura, J. Yanagimoto, S. Sugiyama
- Organizer
  The Proceedings of the 2006 Japanese Spring conference for the Thechnology of Plasticity
- Place of Presentation
  Chiba
- Year and Date
  2008-05-24
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360357
[Presentation] 焼結押出し法によるCNT分散複合材料の一発創成2008
- Author(s)
  柳本潤、杉山澄雄、植村貴
- Organizer
  平成20年度春季塑性加工講演会論文集
- Place of Presentation
  日大生産工学部(習志野
- Year and Date
  2008-05-24
- Data Source
  KAKENHI-PROJECT-16360357
[Presentation] 焼結押出し法によるCNT分散複合材料の一発創成2008
- Author(s)
  植村貴、柳本潤、杉山澄雄
- Organizer
  平成20年度塑性加工春季講演会
- Place of Presentation
  日本大学生産工学部(千葉)
- Year and Date
  2008-05-24
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360357
[Presentation] Generation of ultrafine Grained Steel by Single-pass Hot Forming with Severe Plastic Deformation(Effects of temperature and Strain Rate on Microsructure)2006
- Author(s)
  J. Yanagimoto, K. Nagato
- Organizer
  The Proceedings of the 2006 Japanese Spring Conference for the Thechnology of Plasticity
- Place of Presentation
  Tokyo
- Year and Date
  2006-05-27
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360357
[Presentation] Generation of Ultrafine Grained Steel by Single-pass Hot Forming with Severe Plastic Deformation(Mechanical Characteristics of Ultra fine Grained Steel after Extrusion)2006
- Author(s)
  J. yanagimoto, K. Nagato
- Organizer
  The Proceedings of the 2006 Japanese Spring Conference for the Thechonology of Plasticity
- Place of Presentation
  Tokyo
- Year and Date
  2006-05-27
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360357
[Presentation] 1パス熱間強加工による超微細鉄鋼材料の一発創成(第2報低温大歪み速度加工の内部組織に対する影響)2006
- Author(s)
  柳本潤、長藤圭介
- Organizer
  平成18年度塑性加工春季講演会
- Place of Presentation
  東京工業大学(東京)
- Year and Date
  2006-05-27
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360357
[Presentation] 1パス熱間強加工による超微細鉄鋼材料の一発創成(第3報 1パス加工微細組織鉄鋼材料の機械的特性)2006
- Author(s)
  柳本潤、長藤圭介
- Organizer
  平成18年度塑性加工春季講演会
- Place of Presentation
  東京工業大学(東京)
- Year and Date
  2006-05-27
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360357
[Presentation] Generation of Ultrafine Grained Steel by Single-pass Hot Forming with Severe Plastic Deformation2005
- Author(s)
  J. Yanagimoto, K. Nagato
- Organizer
  The Proceedings of the 56th Japanese Joint conference for the Thechnology of Plasticity
- Place of Presentation
  Okinawa
- Year and Date
  2005-11-19
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360357
[Presentation] 1パス熱間強加工による超微細鉄鋼材料の一発創成2005
- Author(s)
  柳本潤、長藤圭介
- Organizer
  第56回塑性加工連合講演会
- Place of Presentation
  琉球大学(沖縄)
- Year and Date
  2005-11-19
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360357
[Presentation] 熱間強せん断変形および圧縮変形によるミクロ・ナノ組織変化の物理シミュレーション
- Author(s)
  林ジン諭、杉山澄雄、柳本潤
- Organizer
  第65回塑性加工連合講演会
- Place of Presentation
  岡山大学　津島キャンパス
- Year and Date
  2014-10-11 – 2014-10-13
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] Purification of Aluminium Alloy by Semisolid Processing
- Author(s)
  Thet Thet Cho、杉山澄雄、柳本潤
- Organizer
  第65回塑性加工連合講演会
- Place of Presentation
  岡山大学　津島キャンパス
- Year and Date
  2014-10-11 – 2014-10-13
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] 強間強せん断変形および圧縮変形によるミクロ・ナノ組織変化の物理シミュレーション
- Author(s)
  林妗諭、杉山澄雄、柳本潤
- Organizer
  第65回塑性加工連合講演会
- Place of Presentation
  岡山大学津島キャンパス
- Year and Date
  2014-10-11 – 2014-11-13
- Data Source
  KAKENHI-ORGANIZER-22102001
[Presentation] Purification and Densification of Aluminium Alloy Scraps by using the Backward Extrusion Method in Semisolid Processing
- Author(s)
  Thet Thet Cho、杉山澄雄、柳本潤
- Organizer
  平成26年度塑性加工春季講演会
- Place of Presentation
  研究交流センター　つくば国際会議場
- Year and Date
  2014-06-06 – 2014-06-08
- Data Source
  KAKENHI-PLANNED-22102005
[Presentation] Effects of Post Heat Treatment on Microstructure and Mechanical Properties of RAP-Processed Cr-V-Mo Steel
- Author(s)
  Y. Meng, S.Sugiyama and J.Yanagimoto
- Organizer
  13th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2014)
- Place of Presentation
  The German University of Technology in Oman
- Year and Date
  2014-09-15 – 2014-09-17
- Data Source
  KAKENHI-PLANNED-22102005

1. SUGIYAMA Sumio (90242122)

# of Collaborated Projects: 2 results

# of Collaborated Products: 7 results
2. TSUJI Nobuhiro (30263213)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
3. HORITA Zenji (20173643)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. OGATA Narinobu (20273584)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. SHIMOKAWA Tomotsugu (40361977)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. KATO Masaharu (50161120)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. INOUE Tadanobu (90354274)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
8. TSUCHIDA Noriyuki (90382259)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. YANAGIDA Akira (20432065)

# of Collaborated Projects: 1 results

# of Collaborated Products: 5 results
10. 大家哲朗 (10410846)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. TAYLOR THOMAS

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results

Yanagimoto Jun 柳本 潤

YANAGIMOTO Jun 柳本 潤

Research Projects

Research Products

Co-Researchers

Design and fabrication of multilayered sheet by metallic face and composite core with three-dimensional periodic structurePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Physical and Numerical Simulation of Hot Stamping for Hybrid Steel-Composite Lightweigh t BodiesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Manufacturing ULCs (Ultra-Lightweight constructions) of thermosetting continuous CFRP by continuous production of strip, forming at 100 degree Celsius, and joining by plastic deformationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Management of Collaborative Research Works within the Bulk Nanostructure Metals Project

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Physical and Numerical Simulations on the Formation of Bulk-nanostructured MetalsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Precise Springback-free Forming of High Specific Strength Sheet for Realizing Ultra-Lightweight ConstructionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Single-pass severe plastic forming to manufacture products with superfine functionsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Additive manufacturing assisted fabrication of octet truss structures using continuous carbon fibre composites and the resulting mechanical responses2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Integral forming of continuous CFRP sandwich sheet by additive manufacturing2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Improving the formability of sandwich sheets by the hydrostatic effect of encapsulated media2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Enhancement of mechanical property and formability of CFRP core sandwich sheets by additive manufacturing process-induced material and structural anisotropies2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Evaluation of the mechanical properties and deformability of metal-based composite sheets made of thin stainless-steel sheets and carbon fiber reinforced plastics2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Bending properties of sandwich sheets with metallic face sheets and additively manufactured 3D CFRP lattice cores2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Density-based topology optimization integrated with genetic algorithm for optimizing formability and bending stiffness of 3D printed CFRP core sandwich sheets2021

Author(s)

Journal Title

Yanagimoto Jun 柳本潤

YANAGIMOTO Jun 柳本潤