Morita Tatsurou 森田辰郎

… Alternative Names

Morita Tatsuro 森田辰郎

MORITA Tatsuro 森田辰郎

森田辰郎モリタタツロウ

Less

Researcher Number	90239658
Other IDs
External Links
Affiliation (Current)	2025: 京都工芸繊維大学, 機械工学系, 教授
Affiliation (based on the past Project Information) *help	2024: 京都工芸繊維大学, 機械工学系, 教授 2019 – 2021: 京都工芸繊維大学, 機械工学系, 教授 2016 – 2017: 京都工芸繊維大学, 機械工学系, 教授 2015: 京都工芸繊維大学, 機械工学系, 准教授 2007 – 2014: Kyoto Institute of Technology, 工芸科学研究科, 准教授 … More 2006: 京都工芸繊維大学, 工芸科学研究科, 助教授 2002 – 2005: 京都工芸繊維大学, 工芸学部, 助教授 1998: 京都工繊大, 工芸学部, 助手 1997: 京都工芸繊維大学, 工芸学部, 助手 1993 – 1995: 京都工芸繊維大学, 工芸学部, 助手 Less
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Materials/Mechanics of materials / Basic Section 18010:Mechanics of materials and materials-related Except Principal Investigator Materials/Mechanics of materials
Keywords	Principal Investigator チタン合金 / 疲労強度 / 耐摩耗性 / 短時間熱処理 / 疲労 / 高周波誘導加熱 / 三次元プリンタ / SLM / 三次元プリンター / fatigue … More / 機械的性質 / 摩擦摩耗特性 / 微粒子衝突処理 / 複合処理 / DLC被覆 / 応力誘起変態 / 強度 / 硬さ / チタン / 表面改質 / 耐食性 / 炭素 / 急速高温処理 / スキャンストラテジ / 積層造形材 / 表面処理 / 高周波加熱 / 積層造形 / 高速酸窒化 / LPBF / 機械材料・材料力学 / EBM / プラズマ硬化処理 / 複合表面処理 / fine microstructure / stress induced transformation / martensite transformation / mechanical properties / short-time heat treatment / titanium alloy / 延性 / 微細組織 / マルテンサイト変態 / simulation / dynamics / dislocations / propagation / initiation / crack / 遮蔽効果 / 転位動力学 / 入り込み・突き出し / 応力拡大係数 / 弾性相互作用 / き裂進展 / き裂発生 / シミュレーション / 転位 / DLC / プラズマ処理 / FPB / DLC被覆処理 / プラズマ窒化 / 長時間窒化 / 極短時間熱処理 / 窒化 / 複合表面改質 / 冷間加工性 / 熱処理 / 微視組織 / 短時間時効 / 塑性加工 / β型チタン合金 / き裂進展挙動 / レーザー / 第1原理 / 表面改質層 … More Except Principal Investigator 超短時間窒化プロセス / チタン合金 / 高周波誘導加熱 / 大気圧プラズマ / 疲労特性 / 耐食性 / 微粒子ピーニング / 表面改質 Less

Comprehensive improvement of performance of additive-manufactured titanium alloy by advanced rapid high temperature heat treatmentPrincipal Investigator
- Principal Investigator
  
  森田辰郎
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Kyoto Institute of Technology
Improvement in performance of titanium alloy produced by 3D printer using advanced rapid high-temperature heat treatmentPrincipal Investigator
- Principal Investigator
  
  Morita Tatsuro
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Kyoto Institute of Technology
Development of super rapid nitriding process for titanium alloys
- Principal Investigator
  
  KOMOTORI JUN
- Project Period (FY)
  2016 – 2017
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Keio University
Establishment of advanced hybrid treatment for titanium alloy produced by three-dimensional printerPrincipal Investigator
- Principal Investigator
  
  Tatsuro Morita
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyoto Institute of Technology
Surface modification of structural steel by high temperature fine particle peening
- Principal Investigator
  
  KOMOTORI JUN
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Keio University
Establishment of Advanced Hybrid Treatment Process Composed of Surface Modification and Heat TreatmentPrincipal Investigator
- Principal Investigator
  
  MORITA TATSURO
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyoto Institute of Technology
Establishment of New Hybrid Surface Modification Including DLC Coatings as Final TreatmentPrincipal Investigator
- Principal Investigator
  
  MORITA Tatsuro
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyoto Institute of Technology
Improvement of Cold Working Ability and Strength of Titanium Alloy(Application of Stress-induced Transformation)Principal Investigator
- Principal Investigator
  
  MORITA Tatsuro
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyoto Institute of Technology
Improvement of Strength and Ductility of α+β Titanium Alloy by Stress Induced Transformation and Fining MicrostructurePrincipal Investigator
- Principal Investigator
  
  MORITA Tatsuro
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyoto Institute of Technology
SIMULATION OF FATIGNE CRACK INTIATION AND PROPAGATION BASED UPON DISLOCATION DYNAMICSPrincipal Investigator
- Principal Investigator
  
  MORITA Tatsuro
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyoto Institute of Technology
B型チタン合金の短時間加工時効法の確立Principal Investigator
- Principal Investigator
  
  森田辰郎
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyoto Institute of Technology
高周波誘導加熱により誘起される炭素拡散反応を用いたチタンの表面改質法Principal Investigator
- Principal Investigator
  
  森田辰郎
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyoto Institute of Technology
レーザー照射により誘起される炭素-チタン反応を用いた表面改質法の確立Principal Investigator
- Principal Investigator
  
  森田辰郎
- Project Period (FY)
  1994
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyoto Institute of Technology
炭素イオン注入法を用いたチタンの表面設計手法の確立Principal Investigator
- Principal Investigator
  
  森田辰郎
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyoto Institute of Technology

[Journal Article] Short-Time Heat Treatment for Ti–6Al–4V Alloy Produced by Selective Laser Melting2022
- Author(s)
  Tatsuro Morita, Yohei Oka, Seiichiro Tsutsumi, Shogo Takesue, Norio Higuchi, Hitoshi Sakai
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 63 Issue: 6 Pages: 854-863
- DOI
  10.2320/matertrans.MT-M2022018
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2022-06-01
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02027, KAKENHI-PROJECT-21H01545
[Journal Article] Rapid Oxynitriding of Ti–6Al–4V Alloy by Induction Heating in Air2021
- Author(s)
  K. Tamura, S. Takesue, T. Morita, E. Marin, J. Komotori, Y. Misaka, M. Kumagai
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 62 Issue: 1 Pages: 111-117
- DOI
  10.2320/matertrans.Z-M2020858
- NAID
  130007960224
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2021-01-01
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02027
[Journal Article] Rapid nitriding mechanism of titanium alloy by gas blow induction heating2020
- Author(s)
  Shogo Takesue, Shoichi Kikuchi, Yoshitaka Misaka, Tatsuro Morita, Jun Komotori
- Journal Title
  
  Surface and Coatings Technology
  
  Volume: 399 Pages: 126160-126160
- DOI
  10.1016/j.surfcoat.2020.126160
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K14609, KAKENHI-PROJECT-19H02027
[Journal Article] Fundamental Properties of Ti-6Al-4V Alloy Produced by Selective Laser Melting Method2017
- Author(s)
  T. Morita, C. Tsuda, H. Sakai, N. Higuchi
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 58 Issue: 10 Pages: 1397-1403
- DOI
  10.2320/matertrans.M2017103
- NAID
  130006096687
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H03892
[Journal Article] Influences of scanning speed and short-time heat treatment on fundamental properties of Ti-6Al-4V alloy produced by EBM method2017
- Author(s)
  T. Morita, C. Tsuda, T. Nakano
- Journal Title
  
  Materials Science and Engineering A
  
  Volume: 704 Pages: 246-251
- DOI
  10.1016/j.msea.2017.08.020
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25220912, KAKENHI-PROJECT-15H03892
[Journal Article] Effect of Combination Treatment on Functionalities and Strength of Ti-6Al-4V Alloy2015
- Author(s)
  津田千嘉，森田辰郎，刈屋翔太，加賀谷忠治
- Journal Title
  
  Journal of the Japan Institute of Metals and Materials
  
  Volume: 79 Issue: 4 Pages: 195-202
- DOI
  10.2320/jinstmet.J2014059
- NAID
  130005061069
- ISSN
  0021-4876, 1880-6880, 2433-7501
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] Effect of Combination Treatment on Wear Resistance and Strength of Ti-6Al-4V Alloy2014
- Author(s)
  T. Morita, K. Asakura, C. Kagaya
- Journal Title
  
  Materials Science and Engineering A (Elsevier)
  
  Volume: 618 Pages: 438-446
- DOI
  10.1016/j.msea.2014.09.042
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] DLC被覆とプラズマ硬化処理から構成される複合表面改質の効果（解説記事）2014
- Author(s)
  森田辰郎，加賀谷忠治，池永　勝
- Journal Title
  
  熱処理
  
  Volume: 54 Pages: 120-124
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] Influences of Fine-Particle Bombarding and Conventional Shot Peening on Surface Properties of Steel2014
- Author(s)
  T. Morita, S. Noda, C. Kagaya
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 55 Issue: 4 Pages: 646-652
- DOI
  10.2320/matertrans.M2013322
- NAID
  130004825179
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] Influence of Hardness of Substrates on Properties of Surface Layer Formed by Fine Particle Bombarding2013
- Author(s)
  T. Morita, S. Noda, C. Kagaya
- Journal Title
  
  Materials Science and Engineering A
  
  Volume: 574 Pages: 197-204
- DOI
  10.1016/j.msea.2013.03.026
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] Effect of Hybrid Surface Treatment Composed of Plasma Nitriding and Fine Particle Bombarding on Fatigue Strength of Ti–6Al–4V Alloy2013
- Author(s)
  T. Morita, N. Uehigashi, C. Kagaya
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 54 Issue: 1 Pages: 22-27
- DOI
  10.2320/matertrans.M2012262
- NAID
  130004824976
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] Effect of Hybrid Surface Treatment Composed of Plasma Nitriding and DLC Coating on Friction Coefficient and Fatigue Strength of Stainless Steel2013
- Author(s)
  T. Morita, K. Andatsu, S. Hirota, T. Kumakiri, M. Ikenaga, C. Kagaya
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 54 Issue: 5 Pages: 732-737
- DOI
  10.2320/matertrans.M2012426
- NAID
  10031168419
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] DLC被覆を最終処理とする金属材料の複合表面改質2013
- Author(s)
  森田辰郎
- Journal Title
  
  応用物理
  
  Volume: 印刷中
- NAID
  10031166466
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] Improvement of Fatigue Strength of Ti–6Al–4V Alloy by Hybrid Surface Treatment Composed of Plasma Nitriding and Fine-Particle Bombarding2013
- Author(s)
  T. Morita, N. Uehigashi, C. Kagaya
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 54 Issue: 9 Pages: 1719-1724
- DOI
  10.2320/matertrans.M2013228
- NAID
  10031194662
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] DLC被覆を最終処理とする金属材料の複合表面改質2013
- Author(s)
  森田辰郎，池永　勝，加賀谷忠治
- Journal Title
  
  応用物理
  
  Volume: 82 Pages: 416-420
- NAID
  10031166466
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] 表面改質および組織制御によるチタンの高性能化2012
- Author(s)
  森田辰郎
- Journal Title
  
  チタン
  
  Volume: 60 Pages: 40-43
- Data Source
  KAKENHI-PROJECT-21560090
[Journal Article] Effects of Plasma Carburizing and DLC Coating on Friction-Wear Characteristics, Mechanical Properties and Fatigue Strength of Stainless Steel2012
- Author(s)
  T. Morita, Y. Hirano, K. Asakura, T. Kumakiri, M. Ikenaga, C. Kagaya
- Journal Title
  
  Materials Science And Engineering A
  
  Volume: 558 Pages: 349-355
- DOI
  10.1016/j.msea.2012.08.011
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] 表面改質および組織制御によるチタンの高性能化2012
- Author(s)
  森田辰郎
- Journal Title
  
  チタン(日本チタン協会誌)
  
  Volume: Vol.60(印刷中)
- Data Source
  KAKENHI-PROJECT-21560090
[Journal Article] 微粒子衝突処理により形成される表面層の性状とその効果2012
- Author(s)
  森田辰郎，加賀谷忠治
- Journal Title
  
  熱処理
  
  Volume: 52 Pages: 136-142
- NAID
  10030817208
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] 表面改質および組織制御によるチタンの高性能化2012
- Author(s)
  森田辰郎
- Journal Title
  
  チタン
  
  Volume: 60 Pages: 140-143
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] Effects of Fine Particle Bombarding on Surface Characteristics and Fatigue Strength of Commercial Pure Titanium2012
- Author(s)
  T. Morita, H. Nakaguchi, S. Noda, C. Kagaya
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 53 Issue: 11 Pages: 1938-1945
- DOI
  10.2320/matertrans.M2012226
- NAID
  130004454883
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560098
[Journal Article] Effects of Plasma-Nitriding and Ti-DLC Coating on Friction-Wear Characteristics and Fatigue Properties of Stainless Steel SUS3162011
- Author(s)
  X. Ding, T. Morita, S. Hirota, M. Ikenaga, C. Kagaya
- Journal Title
  
  Proceedings of The Second China-Japan Joint Symposium on Fatigue of Engineering Materials and Structures
  
  Pages: 107-108
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560090
[Journal Article] Effects of Plasma-Nitriding and Ti-DLC Coating on Friction-Wear Characteristics and Fatigue Properties of Stainless Steel SUS3162011
- Author(s)
  X.Ding, T.Morita, S.Hirota, M.Ikenaga, C.Kagaya
- Journal Title
  
  Proceedings of The Second China-Japan Joint Symposium on Fatigue of Engineering Materials and Structures
  
  Pages: 107-108
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560090
[Journal Article] 積層構造を有するDLC層を被覆したステンレス鋼の疲労特性2009
- Author(s)
  森田辰郎, 平野靖典, 冨田幸太, 熊切正, 加賀谷忠治, 池永勝
- Journal Title
  
  日本機械学会論文集(A)
  
  Volume: 75-751 Pages: 327-332
- NAID
  110007161314
- URL
  http://repository.lib.kit.ac.jp/dspace/handle/10212/2020
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560090
[Journal Article] 表面改質材の疲労強度の考え方と最近の研究2009
- Author(s)
  森田辰郎, 加賀谷忠治
- Journal Title
  
  金属 79-7
  
  Pages: 21-26
- Data Source
  KAKENHI-PROJECT-21560090
[Journal Article] 表面改質材の疲労強度の考え方と最近の研究2009
- Author(s)
  森田辰郎, 加賀谷忠治
- Journal Title
  
  金属
  
  Volume: 79-72 Pages: 21-26
- Data Source
  KAKENHI-PROJECT-21560090
[Journal Article] 積層構造を有するDLC層を被覆したステンレス鋼の疲労特性2009
- Author(s)
  森田辰郎, 平野靖典, 冨田幸太, 熊切正, 加賀谷忠治, 池永勝
- Journal Title
  
  日本機械学会論文集 (A) 75-751
  
  Pages: 327-332
- NAID
  110007161314
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560090
[Journal Article] Ti-6Al-4V合金の疲労強度に及ぼす短時間2段階熱処理の影響2007
- Author(s)
  森田辰郎, 信田康介, 川崎一博, 三阪佳孝
- Journal Title
  
  材料 56-4
  
  Pages: 345-351
- NAID
  130002085873
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560080
[Journal Article] Ti-6Al-4V合金の疲労強度に及ぼす短時間2段階熱処理の影響2007
- Author(s)
  森田辰郎, 信田康介, 川嵜一博, 三阪佳孝
- Journal Title
  
  材料 56-4(印刷中)
- NAID
  130002085873
- Data Source
  KAKENHI-PROJECT-18560080
[Journal Article] Ti-6Al-4V合金の疲労強度に及ぼす短時間2段階熱処理の影響2007
- Author(s)
  森田辰郎, 信田康介, 川嵜一博, 三阪佳孝
- Journal Title
  
  材料 56-4
  
  Pages: 345-351
- NAID
  130002085873
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560080
[Journal Article] Ti-6Al-4V合金の静的強度および疲労強度に及ぼす短時間2段階熱処理の効果2006
- Author(s)
  森田辰郎, 信田康介, 川嵜一博, 三阪佳孝
- Journal Title
  
  日本材料学科疲労部門委員会第28回疲労シンポジウム講演論文集
  
  Pages: 101-104
- Data Source
  KAKENHI-PROJECT-18560080
[Journal Article] Improvement of Fatigue Strength of Ti-6Al-4V Alloy by Short-Time Duplex Heat Treatment2005
- Author(s)
  K.Shinoda, T.Morita
- Journal Title
  
  Mechanical Engineering Congress 2005 Japan (MECJ-05) (in Japanese) Vol.1, No.05-1
  
  Pages: 195-196
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560069
[Journal Article] Strengthening of Ti-6Al-4V Alloy by Short-Time Duplex Heat Treatment2005
- Author(s)
  T.Morita, K.Hatsuoka, T.Iizuka, K.Kawasaki
- Journal Title
  
  Materials Transaction Vol.46, No.7
  
  Pages: 1681-1686
- NAID
  10016619828
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560069
[Journal Article] Strengthening of Ti-6Al-4V Alloy by Short-Time Duplex Heat Treatment2005
- Author(s)
  T.Morita, K.Hatsuoka, T.Iizuka, K.Kawasaki
- Journal Title
  
  Materials Transaction 46・7
  
  Pages: 1681-1686
- NAID
  10016619828
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560069
[Journal Article] Strengthening of Ti-6Al-4V Alloy by Short-Time 2-Stage Induction Heat Treatment2005
- Author(s)
  T.Morita, Y.Misaka, K.Kawasaki, Takashi Iizuka
- Journal Title
  
  Journal of Japan Institution of Metals (in Japanese) Vol.68, No.10
  
  Pages: 862-867
- NAID
  10013717393
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560069
[Journal Article] 短時間2段階熱処理によるTi-6Al-4V合金の高疲労強度化2005
- Author(s)
  信田康介, 森田辰郎
- Journal Title
  
  日本機械学会2005年度年次大会講演論文集(1) 50-1
  
  Pages: 195-196
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560069
[Journal Article] 短時間2段階高周波熱処理によるTi-6Al-4V合金の高強度化2004
- Author(s)
  森田辰郎, 三阪佳孝, 川嵜一博, 飯塚高志
- Journal Title
  
  日本金属学会誌 68・10
  
  Pages: 862-867
- NAID
  10013717393
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560069
[Patent] チタン合金造形物2022
- Inventor(s)
  森田辰郎・他5名
- Industrial Property Rights Holder
  森田辰郎・他5名
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2021-181392
- Filing Date
  2022
- Data Source
  KAKENHI-PROJECT-19H02027
[Presentation] 高周波誘導加熱での高速酸窒化処理およびFPB処理によるTi-6Al-4V合金積層造形材の機能性向上2021
- Author(s)
  奥野由雅，森田辰郎，武末翔吾，酒井仁史，樋口官男，小茂鳥潤，三阪佳孝，熊谷正夫
- Organizer
  日本材料学会第7回材料week若手学生研究発表会
- Data Source
  KAKENHI-PROJECT-19H02027
[Presentation] Ti-6Al-4V合金積層造形材の大気中での高周波誘導加熱による高速酸窒化処理（優秀講演発表賞受賞）2019
- Author(s)
  奥野由雅，田村和暉，森田辰郎，武末翔吾，小茂鳥潤
- Organizer
  日本材料学会関東支部理事会主催学生研究交流会
- Data Source
  KAKENHI-PROJECT-19H02027
[Presentation] 大気中での高周波誘導加熱によるTi-6Al-4V合金積層造形材の高速酸窒化処理2019
- Author(s)
  田村和暉，森田辰郎，武末翔吾，酒井仁史，樋口官男，小茂鳥潤，三阪佳孝，熊谷正夫
- Organizer
  日本金属学会2019年秋期（第165回）講演大会
- Data Source
  KAKENHI-PROJECT-19H02027
[Presentation] 大気中での高周波誘導加熱によるTi-6Al-4V合金の高速酸窒化処理2019
- Author(s)
  田村和暉，森田辰郎，武末翔吾，小茂鳥潤，三阪佳孝，熊谷正夫
- Organizer
  日本材料学会第5回材料WEEK若手学生研究発表会
- Data Source
  KAKENHI-PROJECT-19H02027
[Presentation] EBM法により作製したTi-6Al-4V合金の疲労強度に及ぼす短時間熱処理の効果2018
- Author(s)
  河口紘明，安達祐斗，森田辰郎，中野貴由
- Organizer
  日本材料学会第67期通常総会・学術講演会
- Data Source
  KAKENHI-PROJECT-15H03892
[Presentation] ピーニング処理を施したTi-6Al-4V合金の表面層性状と疲労強度の関係2017
- Author(s)
  宮谷厚志，森田辰郎，小茂鳥潤，下平英二，熊谷正夫
- Organizer
  日本材料学会第66期講演会
- Data Source
  KAKENHI-PROJECT-15H03894
[Presentation] 短時間熱処理を施した3次元プリンタ製Ti-6Al-4V合金の機械的性質2016
- Author(s)
  岡要平，森田辰郎，酒井仁史，樋口官男
- Organizer
  日本材料学会第65期学術講演会
- Place of Presentation
  富山大学（富山市）
- Year and Date
  2016-05-28
- Data Source
  KAKENHI-PROJECT-15H03892
[Presentation] 短時間熱処理による3次元プリンター製Ti-6Al-4V合金の疲労強度の改善2016
- Author(s)
  岡　要平，森田辰郎，津田千佳，酒井仁史，樋口官男
- Organizer
  日本金属学会2016年（第158回）春期講演大会
- Place of Presentation
  東京理科大学（東京都）
- Year and Date
  2016-03-23
- Data Source
  KAKENHI-PROJECT-15H03892
[Presentation] 3次元プリンタ製Ti-6Al-4V合金の基本特性2016
- Author(s)
  安達祐斗，森田辰郎，津田千嘉，酒井仁史，樋口官男
- Organizer
  日本材料学会第65期学術講演会
- Place of Presentation
  富山大学（富山市）
- Year and Date
  2016-05-28
- Data Source
  KAKENHI-PROJECT-15H03892
[Presentation] 3次元プリンタ製Ti-6Al-4V合金の基本特性に及ぼすプラズマ窒化処理の影響2016
- Author(s)
  古川敬太，森田辰郎，岡要平，酒井仁史，樋口官男
- Organizer
  日本材料学会第65期学術講演会
- Place of Presentation
  富山大学（富山市）
- Year and Date
  2016-05-28
- Data Source
  KAKENHI-PROJECT-15H03892
[Presentation] Effect of short-time heat treatment on properties of Ti-6Al-4V alloy produced by selective laser melting2016
- Author(s)
  Y. Oka, T. Morita , C. Tsuda, H. Sakai and N. Higuchi
- Organizer
  The 17th International Conference on Experimental Mechanics
- Place of Presentation
  Greece
- Year and Date
  2016-07-05
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03892
[Presentation] 複合処理による3次元プリンター製Ti-6Al-4V合金の疲労特性および耐摩耗性の改善2016
- Author(s)
  岡　要平，森田辰郎，酒井仁史，樋口官夫
- Organizer
  日本金属学会2016年（第159回）秋期講演大会
- Place of Presentation
  大阪大学（豊中市）
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-15H03892
[Presentation] EBM法により作製したTi-6Al-4V合金の諸特性に及ぼす短時間熱処理の効果2015
- Author(s)
  森田辰郎，津田千佳，中野貴由
- Organizer
  日本金属学会2015年（第157回）秋期講演大会
- Place of Presentation
  九州大学（福岡市）
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-15H03892
[Presentation] Effects of Short-Time Duplex Heat Treatment on Microstructure and Fatigue Strength of Ti-6Al-4V Alloy2013
- Author(s)
  Satoshi Tanaka, Tatsuro Morita, Kosuke Shinoda
- Organizer
  13th International Conference on Fracture
- Place of Presentation
  CNCC（中国北京）
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] DLC被覆を最終処理とする複合表面改質を施したSCM440鋼の摩擦・摩耗特性および疲労強度2013
- Author(s)
  井上健太，森田辰郎，丁　驍騰，平田健介，臼井可隆，池永　勝
- Organizer
  日本材料学会第62期学術講演会
- Place of Presentation
  東京工業大学（東京都）
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] 短時間熱処理によるTi-6Al-4V合金切欠き材の疲労強度の改善2013
- Author(s)
  田中　聡，津田千嘉，嶋村　護，森田辰郎，二宮　進
- Organizer
  日本材料学会第62期学術講演会
- Place of Presentation
  東京工業大学（東京都）
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] プラズマ拡散窒化およびDLC被覆したSCM440鋼の摩擦・摩耗特性2012
- Author(s)
  丁　驍騰，森田辰郎，臼井可隆，平田健介，池永　勝
- Organizer
  日本機械学会材料力学カンファレンスM&M2012
- Place of Presentation
  愛媛大学（松山市）
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] 表面改質および組織制御によるチタン合金の高性能化2011
- Author(s)
  森田辰郎
- Organizer
  日本チタン協会平成23年度表彰式・記念講演会
- Place of Presentation
  東京都(招待講演)
- Year and Date
  2011-11-14
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] DLC被覆処理と金属材料の疲労強度の関係2011
- Author(s)
  森田辰郎
- Organizer
  京都府中小企業技術センター第3回DLC製膜技術研究会
- Place of Presentation
  京都市(招待講演)
- Year and Date
  2011-11-02
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] Ti-6Al-4V合金の摩擦摩耗特性,機械的性質および疲労強度に及ぼすDLC被覆および複合処理の効果2011
- Author(s)
  森田辰郎
- Organizer
  日本金属学会機能性チタン合金研究会第4回講演会
- Place of Presentation
  東京都(招待講演)
- Year and Date
  2011-12-16
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] プラズマ窒化およびTi-DLC被覆処理を施したステンレス鋼SUS316の摩擦特性および疲労特性2011
- Author(s)
  丁驍騰, 森田辰郎, 廣田悟史, 池永勝, 加賀谷忠治
- Organizer
  日本機械学会2011年度年次大会講演会
- Place of Presentation
  東京都
- Year and Date
  2011-09-12
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] Ti-6Al-4V合金の摩擦摩耗特性,機械的性質および疲労強度に及ぼすDLC被覆および複合処理の効果2011
- Author(s)
  森田辰郎
- Organizer
  日本金属学会機能性チタン合金研究会第4回講演会
- Place of Presentation
  東京(ちよだプラットフォームスクエア)(招待講演)
- Year and Date
  2011-12-16
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] プラズマ窒化およびTi-DLC被覆処理を施したステンレス鋼SUS316の摩擦特性および疲労特性2011
- Author(s)
  丁驍騰, 森田辰郎, 廣田悟史, 池永勝, 加賀谷忠治
- Organizer
  日本機械学会2011年度年次大会講演会
- Place of Presentation
  東京(東京工業大学)
- Year and Date
  2011-09-12
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] 表面改質および組織制御によるチタン合金の高性能化2011
- Author(s)
  森田辰郎
- Organizer
  日本チタン協会平成23年度表彰式・記念講演会
- Place of Presentation
  東京(学士会館)(招待講演)
- Year and Date
  2011-11-14
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] プラズマ窒化およびSi-DLC被覆処理を施したステンレス鋼の摩擦特性および疲労特性2010
- Author(s)
  安達晃一, 森田辰郎, 廣田悟史, 池永勝, 加賀谷忠治
- Organizer
  日本材料学会疲労部門委員会第30回疲労シンポジウム
- Place of Presentation
  高知常ホール(高知市)
- Year and Date
  2010-10-29
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] プラズマ窒化およびDLC/CrN被覆したステンレス鋼の摩擦特性と疲労特性2010
- Author(s)
  彭峰, 安達晃一, 森田辰郎, 廣田悟史, 大和敬司, 加賀谷忠治, 池永勝
- Organizer
  日本機械学会2010年度年次大会
- Place of Presentation
  名古屋市
- Year and Date
  2010-09-07
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] プラズマ窒化およびDLC/CrN被覆したステンレス鋼の摩擦特性と疲労特性2010
- Author(s)
  彰峰, 安達晃一, 森田辰郎, 廣田悟史, 大和敬司, 加賀谷忠治, 池永勝
- Organizer
  日本機械学会2010年度年次大会
- Place of Presentation
  名古屋工業大学(名古屋市)
- Year and Date
  2010-09-07
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] プラズマ窒化およびSi-DLC被覆処理を施したステンレス鋼の摩擦特性および疲労特性2010
- Author(s)
  安達晃一, 森田辰郎, 廣田悟史, 池永勝, 加賀谷忠治
- Organizer
  日本材料学会疲労部門委員会第30回疲労シンポジウム
- Place of Presentation
  高知市(日本材料学会疲労部門委員会第30回疲労シンポジウム優秀研究発表賞)
- Year and Date
  2010-10-29
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] DLC被覆を最終処理とする複合表面改質を施したステンレス鋼SUS316の疲労特性2009
- Author(s)
  浅倉圭太, 森田辰郎, 平野靖典, 加賀谷忠治, 池永勝, 大和敬司, 熊切正, 田中信一
- Organizer
  日本材料学会第58期学術講演会
- Place of Presentation
  松山市
- Year and Date
  2009-05-24
- Data Source
  KAKENHI-PROJECT-21560090
[Presentation] 短時間溶体化処理によるTi-6Al-4V合金の延性および冷間加工性の向上2007
- Author(s)
  村上賢治, 森田辰郎
- Organizer
  日本機械学会材料力学部門材料力学コンファレンスM&M2007講演論文集
- Data Source
  KAKENHI-PROJECT-18560080
[Presentation] ガス窒化後にDLC被覆を施したSCM440鋼の摩擦・摩耗特性および疲労強度
- Author(s)
  井上健太，森田辰郎，丁　驍騰，臼井可隆，池永　勝
- Organizer
  日本金属学会2014年春季講演大会
- Place of Presentation
  東京工業大学（東京都）
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] ピーニング・微粒子衝突処理の基礎と機械特性向上に活かす効果的な活用法
- Author(s)
  森田辰郎
- Organizer
  日本テクノセンター講習会
- Place of Presentation
  日本テクノセンター（東京都）
- Invited
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] Effects of Short-time Duplex Heat Treatment on Microstructure and Fatigue Strength of Ti-6Al-4V Alloy
- Author(s)
  S. Tanaka, T. Morita, K. Shinoda
- Organizer
  13th International Conference on Fracture
- Place of Presentation
  China National Convention Center (Beijing, China)
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] 微粒子衝突処理を施した金属材料の残留応力と疲労強度
- Author(s)
  森田辰郎
- Organizer
  日本材料学会第170回X線材料強度部門委員会
- Place of Presentation
  日本材料学会（京都市）
- Invited
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] Effect of Hybrid Treatment Composed of Gas Nitriding and DLC Coating on Friction-Wear Characteristics of Steel
- Author(s)
  K. Inoue, T. Morita, Y. Usui, K. Hirata, M. Ikenaga
- Organizer
  The 16th International Conference on Experimental Mechanics
- Place of Presentation
  ケンブリッジ大学（イギリス，ケンブリッジ）
- Year and Date
  2014-07-07 – 2014-07-11
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] 大気中でレーザ照射したTi-6Al-4V合金の微視組織および耐摩耗性
- Author(s)
  刈屋翔太, 森田辰郎, 田中　聡，後藤光宏
- Organizer
  日本金属学会2014年秋季講演大会
- Place of Presentation
  名古屋大学（名古屋市）
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] DLC被覆および微粒子衝突処理に基づく複合表面改質
- Author(s)
  森田辰郎
- Organizer
  日本溶接協会平成25年度第3回表面改質技術研究委員会
- Place of Presentation
  新大阪丸ビル（大阪市）
- Invited
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] 微粒子衝突処理を施した金属材料の残留応力と疲労強度
- Author(s)
  森田辰郎，加賀谷忠治
- Organizer
  日本材料学会第170回X線部門講演会
- Place of Presentation
  日本材料学会（京都市）
- Invited
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] プラズマ窒化および微粒子衝突処理から構成される複合表面改質によるオーステナイト系ステンレス鋼SUS316のフレッティング疲労強度の改善
- Author(s)
  岡田光平，森田辰郎，大森俊博，前田英昭
- Organizer
  日本材料学会第63期通常総会・講演会
- Place of Presentation
  福岡大学（福岡市）
- Year and Date
  2014-05-16 – 2014-05-18
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] 微粒子衝突処理を施した金属材料の表面性状と各種熱処理との複合化の効果
- Author(s)
  森田辰郎
- Organizer
  日本熱処理技術協会第76回講演大会
- Place of Presentation
  名城大学（名古屋市）
- Invited
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] DLC被覆を最終処理とする複合表面改質を施したSCM440鋼の摩擦・摩耗特性および疲労強度
- Author(s)
  井上健太，森田辰郎，丁　驍騰，平田健介，臼井可隆，池永　勝
- Organizer
  日本材料学会第62期学術講演会
- Place of Presentation
  京工業大学（東京都）
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] 微粒子衝突処理およびショットピーニング施した炭素鋼の表面性状
- Author(s)
  森田辰郎，野田　翔，加賀谷忠治
- Organizer
  日本金属学会2014年春季講演大会
- Place of Presentation
  東京工業大学（東京都）
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] Effect of Hybrid Treatment Composed of Gas Nitriding and DLC Coating on Fatigue Strength of Steel
- Author(s)
  K. Inoue, T. Morita, Y. Usui, K. Hirata, M. Ikenaga
- Organizer
  The 3rd Japan-China Joint Symposium on Fatigue of Engineering Materials and Structures
- Place of Presentation
  高山市民文化会館（高山市）
- Year and Date
  2014-11-06 – 2014-11-08
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] プラズマ窒化，短時間熱処理および微粒子衝突処理から構成される複合処理によるTi-6Al-4V合金の疲労強度の改善
- Author(s)
  津田千嘉，刈屋翔太，森田辰郎
- Organizer
  日本金属学会2014年秋季講演大会
- Place of Presentation
  名古屋大学（名古屋市）
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] Improvement in Fatigue Strength of Notched Ti-6Al-4V Alloy by Short-Time Heat Treatment Using Lithium Baths
- Author(s)
  C. Tsuda, T. Morita, S. Tanaka, M. Shimamura, S. Ninomiya
- Organizer
  The 16th International Conference on Experimental Mechanics
- Place of Presentation
  ケンブリッジ大学（イギリス，ケンブリッジ）
- Year and Date
  2014-07-07 – 2014-07-11
- Data Source
  KAKENHI-PROJECT-24560098
[Presentation] DLC被覆を最終処理とする複合表面改質によるステンレス鋼のフレッティング疲労強度の改善
- Author(s)
  岡田光平，大森俊博，森田辰郎，前田英昭
- Organizer
  日本金属学会2014年秋季講演大会
- Place of Presentation
  名古屋大学（名古屋市）
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PROJECT-24560098

1. KOMOTORI JUN (30225586)

# of Collaborated Projects: 3 results

# of Collaborated Products: 5 results
2. 曙紘之 (50447215)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. 菊池将一 (80581579)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. 亀山雄高 (20398639)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 大宮正毅 (30302938)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 清水一道 (60206191)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 武末翔吾 (00846058)

# of Collaborated Projects: 1 results

# of Collaborated Products: 5 results
8. 片岡孝夫 (20242307)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. 高木知弘 (50294260)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. KUMAKIRI Masashi

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
11. IROTA Satoshi

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
12. IKENAGA Masaru

# of Collaborated Projects: 1 results

# of Collaborated Products: 11 results
13. 中野貴由

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

Morita Tatsurou 森田 辰郎

Morita Tatsuro 森田 辰郎

MORITA Tatsuro 森田 辰郎

森田 辰郎 モリタ タツロウ

Research Projects

Research Products

Co-Researchers

Comprehensive improvement of performance of additive-manufactured titanium alloy by advanced rapid high temperature heat treatmentPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Improvement in performance of titanium alloy produced by 3D printer using advanced rapid high-temperature heat treatmentPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of super rapid nitriding process for titanium alloys

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Establishment of advanced hybrid treatment for titanium alloy produced by three-dimensional printerPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Surface modification of structural steel by high temperature fine particle peening

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Establishment of Advanced Hybrid Treatment Process Composed of Surface Modification and Heat TreatmentPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Establishment of New Hybrid Surface Modification Including DLC Coatings as Final TreatmentPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Improvement of Cold Working Ability and Strength of Titanium Alloy(Application of Stress-induced Transformation)Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Improvement of Strength and Ductility of α+β Titanium Alloy by Stress Induced Transformation and Fining MicrostructurePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

SIMULATION OF FATIGNE CRACK INTIATION AND PROPAGATION BASED UPON DISLOCATION DYNAMICSPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

B型チタン合金の短時間加工時効法の確立Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

高周波誘導加熱により誘起される炭素拡散反応を用いたチタンの表面改質法Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

レーザー照射により誘起される炭素-チタン反応を用いた表面改質法の確立Principal Investigator

Morita Tatsurou 森田辰郎

Morita Tatsuro 森田辰郎

MORITA Tatsuro 森田辰郎

森田辰郎モリタタツロウ