• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Yang Ming  楊 明

ORCIDConnect your ORCID iD *help
… Alternative Names

YANG Ming  楊 明

揚 明  ヤン ミン

Less
Researcher Number 90240142
Other IDs
External Links
Affiliation (Current) 2025: 東京都立大学, システムデザイン研究科, 教授
Affiliation (based on the past Project Information) *help 2024: 東京都立大学, システムデザイン研究科, 教授
2020 – 2021: 東京都立大学, システムデザイン研究科, 教授
2012 – 2019: 首都大学東京, システムデザイン研究科, 教授
2010 – 2011: Tokyo Metropolitan University, 大学院・システムデザイン研究科, 教授
2008 – 2010: Tokyo Metropolitan University, システムデザイン研究科, 教授 … More
2007 – 2008: Tokyo Metropolitan University, 大学院・システムデザイン研究科, 教授
2007: Tokyo Metropolitan University, Graduate School of System Design, Professor
2006: 首都大学東京, 大学院システムデザイン研究科, 教授
2006: Tokyo Metropolitan University, Department of Systems Design Engineering, Professor, 大学院工学研究科, 教授
2005: Tokyo Metropolitan University, Assistant Professor, システムデザイン学部, 准教授
2005: Tokyo Metropolitan University, Faculty of System Design, Associate Professor, システムデザイン学部, 助教授
2005: 首都大学東京, システムデザイン学部, 準教授
2005: 首都大学東京, 大学院・工学研究科, 助教授
2002 – 2004: 東京都立大学, 工学研究科, 助教授
1998 – 2004: 東京都立大学, 大学院・工学研究科, 助教授
1999: 東京都立大学, 工学研究科, 助教授
1999: 東京都立大学大学院, 工学研究科, 助教授
1997: 東京都立大学, 工学研究科, 助手
1991 – 1997: 東京都立大学, 工学部, 助手 Less
Review Section/Research Field
Principal Investigator
Material processing/Microstructural control engineering / Material processing/treatments / Material processing/treatments / 機械工作・生産工学 / Basic Section 26050:Material processing and microstructure control-related
Except Principal Investigator
Material processing/treatments / Material processing/treatments / Production engineering/Processing studies / 機械工作・生産工学 / 金属加工(含鋳造) / Basic Section 28030:Nanomaterials-related / Fluid engineering / 機械工作
Keywords
Principal Investigator
FEMシミュレーション / 精密部品加工 / 材料加工・処理 / 超音波振動 / トライボロジー / 精密造形プロセス / 曲げ加工 / データベース / 塑性変形 / 金属成形加工 … More / モデル化 / SEM-EBSD分析 / 素材変形促進 / マイクロ金属加工 / 成膜プロセス / ナノ材料 / 薄膜プロセス・メッキ・配線 / テクスチャードフィラメント / 配線 / メッキ / チタンの鍛造 / 金型コーティング / hBN/SiCナノ積層膜 / HFCVD / 薄膜プロセス / 体積膨張 / 金属粉未酸化 / 粉末プロセス・粉末冶金 / マイクロ・ナノデバイス / 金属粉末酸化 / マイクロ投薬システム / Sensor fusion / Intelligent sensing system / Bending process / stress distribution / micro semiconductor strain gauge / die-embedded sensing system / 角度測定 / 金型内臓 / マイクロセンサ / 知能機械 / 先端機能デバイス / 計測工学 / Precision Bending / Database / Simulation / Micro instrumentation / Nano-Indentation / Precision measurement system / Decrease of Elastic Modulus / Prediction on Springback / 適応フィルター / 応力測定 / マイクロ材料物性 / 画像処理 / スプリングバック評価 / 加工精度 / 微視的測定評価 / ヤング率測定 / 高精度曲げ / シミュレーション / マイクロ測定 / ナノインデンテーション / 精密計測システム / 弾性係数の低下 / スプリングバック予測 / 表面転写 / 金属箔材 / 高真空プレス装置 / ナノ触媒 / 真空プレス装置 / 選択的CVD / 転写プリンティング / プレス成形 / スケール横断加工 / 高精度マイクロ成形 / マイクロ加熱システム / 表面矯正 / 振動援用 / 低荷重精密鍛造 / インプロセス矯正 / 通電加熱 / 高密度エネルギー援用 / マイクロ成形 / 精密計測 / 表面処理 / マイクロ金型 / 表面形状計測 / 離散化ウィーブレット / FFT / 真実接触面積 / 超音波計測 / 摺動摩擦 / 表面形状3次元測定 / 離散地ウェーブレット解析 / 界面接触シミュレーション / AE計測 / 任意曲率半径 / 高精度 / L曲げ / リアルタイム制御 / 知能化工具 / 材料特性の同定 / オンライン検索 / 高精度化 / ファジィ制御 … More
Except Principal Investigator
超塑性 / ダイレス引抜き / マイクロチューブ / MEMS / Plastic Working / Lumber / Woody Material / 木材の強度 / 圧縮加工 / 圧密木材 / 木材 / 知的制御 / 曲げ加工 / 深絞り / 塑性加工 / FRM / プレス加工 / ひずみ速度依存性 / 軽量化 / AI制御 / アルミニウム合金 / FEM / 結晶粒微細化 / トランスファープリント / ナノインプリント / イオン注入法 / YAG laser / indentation / epitaxy / nano structure / surface integrity / thin layer / Silicon Carbonate (SiC) / Sic / サーフェスインテグリティー / YAGレーザ / インデンテーション / エピタキシ / ナノ構造 / サーフェスインテグリティ / 薄膜層 / SiC / Ontimization / Forming Process Path / Finite Element Simulation / T-joint Forming / Fuzzy Inference / Intelligent Control / Micro Contact Sensor / Tube Hvdroformin / 最適化 / 成形プロセス経路 / T成形 / ファジィアルゴリズム / マイクロ接触センサ / チューブハイドロフォーミング / Shear-Force Pump / Disk with Fine Grooves / Hydrophobic Surface / Flow past a sphere / Flow in a Duct / Drag reduction / Newtonina fluid / Fluid mechanics / 疎水性壁面 / 滑りの境界条件 / 回転円板周りの流れ / 球周りの流れ / 矩形管内流れ / 撥水性壁面 / 流体工学 / 螺旋溝 / 円板摩擦ポンプ / 回転円板 / VOF / 球 / 超はっ水性壁 / 抵抗減少効果 / Glass / Brittle materials / Ultrasonic vibration / Micromachining / Textured surface / Multi-axes vibration / Vibration machining / ぜい性材料 / ガラス / 脆性材料 / 超音波 / 微細加工 / テクスチャ / 多軸振動 / 振動加工 / nano-texture / molecular beam epitaxy / mono crystal silicon / 単結晶シリコン / ナノテクスチャ / 分子線エピタキシ / Product Quality / Drawing Force / Low vibration frequency / Friction Force / Blank holder Force / No Lubricant / Vibrating Blank Holder / Deep Drawing / 低粘度油 / 潤滑特性 / 適応制御 / 製品品質 / 加工力 / 低周波 / 無潤滑 / しわ抑え力 / 摩擦力 / 振動負荷 / Lightning / Aluminum Shape / Strength / Hybrid Composites / Compressed Wood / 自動車部材 / 建材 / 複合材 / 衝撃吸収 / 衝撃吸収能 / ハイブリッド複合材 / 断熱性 / 圧縮木材 / Compressive Working / Wood Working / Strength of Wood / Compressud Wood / 木材加工 / 木質材料 / Intelligent tool system / Material for automotive body / Formability / Database / Press forming / AI control system / Aluminum alloy / 知的金型 / 潤滑 / 自動車車体用材料 / 成形温度依存性 / 自動車ボディー用材料 / 成形性 / データベース / プレス成形 / 知的工具 / 知的制御システム / Flexible Forming / Neural Network / Metal Forming Control / Bending / フレキシビリティ / 加工の制御 / ニュ-ラルネット / インテリジェント化 / フレキシブル加工 / ニューラルネット / 塑性加工制御 / High Performance Materials / Powder Metallurgy / Composites / Deformation Processing / Superplasticity / 粉未冶金 / 機械性材料 / 粉末冶金 / MMC / 機能性材料 / 粉末治金 / 複合材料 / ボディーシート / 深絞り加工 / 酸化膜 / 加工熱処理 / 機械的性質 / 多パス / 組織制御 / ねじり / 外径変動 / 酸化 / 熱援用引抜き / 加工条件 / 外径精度 / 表面あれ / マルチパス / 引抜き限界 / 熱援用加工 / 伝熱 / 幾何学的相似変形原理 / 集合管 / 異形管 / AFB法 / ECAP法 / ARB法 / 有限要素法 / m値 / 局部加熱 Less
  • Research Projects

    (26 results)
  • Research Products

    (125 results)
  • Co-Researchers

    (38 People)
  •  Development of imprinting technology based on ion implantation.

    • Principal Investigator
      小宮 一毅
    • Project Period (FY)
      2024 – 2026
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 28030:Nanomaterials-related
    • Research Institution
      Tokyo Metropolitan Industrial Technology Research Institute
  •  Mechanism investigation and modeling of material deformation enhancement in micro forming with vibration energy assistancePrincipal Investigator

    • Principal Investigator
      Yang Ming
    • Project Period (FY)
      2019 – 2021
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 26050:Material processing and microstructure control-related
    • Research Institution
      Tokyo Metropolitan University
  •  Development of die coating system for difficult-to-process materials by forming cBN/hBN mixed phase nanocrystalline boron nitride filmPrincipal Investigator

    • Principal Investigator
      YANG Ming
    • Project Period (FY)
      2016 – 2018
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/Microstructural control engineering
    • Research Institution
      Tokyo Metropolitan University
  •  Development of an energy free drug delivery system using oxidative expansion of Fe powderPrincipal Investigator

    • Principal Investigator
      Yang Ming
    • Project Period (FY)
      2015 – 2016
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Material processing/Microstructural control engineering
    • Research Institution
      Tokyo Metropolitan University
  •  Development of Multi-Scale Forming Technology for Fabrication of a metallic micro device with nano catalyst functional surfacePrincipal Investigator

    • Principal Investigator
      YANG Ming
    • Project Period (FY)
      2013 – 2014
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Material processing/Microstructural control engineering
    • Research Institution
      Tokyo Metropolitan University
  •  Fabrication of high grade medical microtubes with microstructure control in superplastic dieless drawing process

    • Principal Investigator
      MANABE Ken-ichi
    • Project Period (FY)
      2012 – 2014
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Development of high-energy assisted processes for precise micro formingPrincipal Investigator

    • Principal Investigator
      YANG Ming
    • Project Period (FY)
      2011 – 2013
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Fabrication of functional surface of micro dies and development of equipment for evaluation of its tribological characteristicsPrincipal Investigator

    • Principal Investigator
      YANG Ming
    • Project Period (FY)
      2008 – 2010
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Development of creation method of extra fine strange appearance set microtube using minute crystal superplasticity

    • Principal Investigator
      真鍋 健一
    • Project Period (FY)
      2006 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Development of die-embedded micro sensing system for sensing and control system in precise metal forming processesPrincipal Investigator

    • Principal Investigator
      YANG Ming
    • Project Period (FY)
      2005 – 2007
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Effect of Single Crystal Nano-Structured Thin Layer on Nano-Surface Integrity

    • Principal Investigator
      FURUKAWA Yuji
    • Project Period (FY)
      2004 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Production of three-dimensional and free-form texture with synchronous multi-axes vibration tool

    • Principal Investigator
      MORONUKI Nobuyuki
    • Project Period (FY)
      2003 – 2005
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo Metropolitan University
  •  Study on Frictional Resistance of Drag Reducing Solid Wall

    • Principal Investigator
      MIZUNUMA Hiroshi, WATANABE Keizo
    • Project Period (FY)
      2003 – 2005
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Fluid engineering
    • Research Institution
      Tokyo Metropolitan University
  •  Intelligent Tube Hydroforming Process with Micro Contact Sensors

    • Principal Investigator
      MANABE Ken-ichi
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  軽量合金組織の微細化による超塑性発現を利用した極細マイクロチューブの製造法開発

    • Principal Investigator
      MANABE Kenーichi
    • Project Period (FY)
      2002 – 2003
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  GENERATING AND ITS EVALUATION OF NANO-TEXTURE ON THE BASIS OF SELF-ORGANIZATION OF ATOMS AND PRE-PATTERNED NUCLEI

    • Principal Investigator
      KAKUTA Akira, FURUKAWA Yuji
    • Project Period (FY)
      2001 – 2003
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      TOKYO METLOPOLITAN UNIVERSITY
  •  Development of Precision Springback Measurement and Bending System of Sheet MetalPrincipal Investigator

    • Principal Investigator
      YANG Ming
    • Project Period (FY)
      2000 – 2002
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  金属材料加工中における素材と工具間の摩擦形態のインプロセス計測Principal Investigator

    • Principal Investigator
      楊 明
    • Project Period (FY)
      1999 – 2000
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Adaptive Blank Holder Control Deep-Drawing Process Using Vibration Tooling Without Lubricant

    • Principal Investigator
      MANABE Ken-ichi
    • Project Period (FY)
      1999 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      TOKYO METROPOLITAN UNIVERSITY
  •  Development of High Performance Wood & Metal Hybrid Composites

    • Principal Investigator
      NISHIMURA Hisashi
    • Project Period (FY)
      1998 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (B).
    • Research Field
      Material processing/treatments
    • Research Institution
      TOKYO METROPOLITAN UNIVERSITY
  •  知能化金型・工具を用いた高精度L曲げ加工システムの開発Principal Investigator

    • Principal Investigator
      楊 明
    • Project Period (FY)
      1995
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo Metropolitan University
  •  Compressive Plastic Working of Woody Materials

    • Principal Investigator
      NISHIMURA Hisashi
    • Project Period (FY)
      1995 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      TOKYO METROPOLITAN UNIVERSITY
  •  インテリジェント塑性加工制御システムに関する研究Principal Investigator

    • Principal Investigator
      楊 明
    • Project Period (FY)
      1993
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo Metropolitan University
  •  Development of High Performance FRM using Superplasticity

    • Principal Investigator
      NISHIMURA Hisashi
    • Project Period (FY)
      1992 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      金属加工(含鋳造)
    • Research Institution
      Tokyo Metropolitan University
  •  AI control system for press forming of of Aluminum alloy sheet for automotive body

    • Principal Investigator
      NISHINUMA Hisashi
    • Project Period (FY)
      1992 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      金属加工(含鋳造)
    • Research Institution
      Tokyo Metropolitan University
  •  Development of an Intelligent System for Sheet Metal Bending

    • Principal Investigator
      SHIMA Susumu
    • Project Period (FY)
      1991 – 1992
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B)
    • Research Field
      機械工作
    • Research Institution
      KYOTO UNIVERSITY

All 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 Other

All Journal Article Presentation

  • [Journal Article] Investigation on Deformation Behavior in the Surface of Metal Foil with Ultrasonic Vibration-Assisted Micro-Forging2022

    • Author(s)
      Zidong Yin, Ming Yang
    • Journal Title

      Materials

      Volume: 15, 1907 Issue: 5 Pages: 1907-1907

    • DOI

      10.3390/ma15051907

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H02481
  • [Journal Article] Evolution of acoustic softening effect on ultrasonic-assisted micro/meso-compression behavior and microstructure2020

    • Author(s)
      Hu Jun、Shimizu Tetsuhide、Yoshino Tomoaki、Shiratori Tomomi、Yang Ming
    • Journal Title

      Ultrasonics

      Volume: 107 Pages: 106107-106117

    • DOI

      10.1016/j.ultras.2020.106107

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H02481
  • [Journal Article] Investigation on Material Deformation Characteristics of Ultrasound-assisted Microcompression with Dynamic Force Sensing Technology2019

    • Author(s)
      Hu Jun、Shimizu Tetsuhide、Yang Ming
    • Journal Title

      Sensors and Materials

      Volume: 31 Issue: 10 Pages: 3111

    • DOI

      10.18494/SAM.2019.2359

    • ISSN
      0914-4935, 2435-0869
    • Year and Date
      2019-10-25
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H02481
  • [Journal Article] Sensing Technologies for Metal Forming2019

    • Author(s)
      Yang Ming
    • Journal Title

      Sensors and Materials

      Volume: 31 Issue: 10 Pages: 3121

    • DOI

      10.18494/SAM.2019.2399

    • ISSN
      0914-4935, 2435-0869
    • Year and Date
      2019-10-25
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H02481
  • [Journal Article] Development of microforming process combined with thin film transfer printing2015

    • Author(s)
      Kazushi Koshimizu, Qiu Zheng, Tetsuhide Shimizu, Mig Yang
    • Journal Title

      Manufacturing Review

      Volume: 2015,2,6 Pages: 1-6

    • DOI

      10.1051/mfreview/2015009

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-25630331, KAKENHI-PROJECT-26820327
  • [Journal Article] Opitimization of metal foils surface finishing using vibration-assisted micro-forging2014

    • Author(s)
      Yang Bai, Ming Yang
    • Journal Title

      Journal of Materials Processing Technology

      Volume: Vol.214, Issue 1 Issue: 1 Pages: 21-28

    • DOI

      10.1016/j.jmatprotec.2013.07.011

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Journal Article] Influence of vibration time and frequency on surface finishing using vibration-assisted micro-forging2014

    • Author(s)
      Yang Bai, Ming Yang
    • Journal Title

      Materials Science Forum

      Volume: Vols.773-774 Pages: 687-693

    • DOI

      10.4028/www.scientific.net/msf.773-774.687

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Journal Article] Investigation on mechanism of metal foil surface finishing with vibration-assisted micro-forging2013

    • Author(s)
      Yang Bai, Ming Yang
    • Journal Title

      Journal of Material Processing Technology

      Volume: Vol.213, Issue 3 Pages: 330-336

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Journal Article] Investigation on mechanism of metal foil surface finishing with vibration-assisted micro-forging2013

    • Author(s)
      Yang Bai, Ming Yang
    • Journal Title

      Journal of Materials Processing Technology

      Volume: Vol.213, Isssue3 Issue: 3 Pages: 330-336

    • DOI

      10.1016/j.jmatprotec.2012.10.013

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Journal Article] Metal Surface Modification with Vibration-Aided Micro-Forging2012

    • Author(s)
      Yang Bai, Kenji Nishikawa, Ming Yang
    • Journal Title

      Materials Transactions

      Volume: Vol.53, No.3 Pages: 489-494

    • URL

      http://www.jim.or.jp/journal/e/53/03/489.html

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Journal Article] Scale Dependence of Dry Friction in Micro Sheet Metal Forming2011

    • Author(s)
      T.Shimizu, S.Iwaoka, M.Yang, K.Manabe
    • Journal Title

      Steel research international

      Volume: (2011 Special Edition) Pages: 979-984

    • URL

      http://www.wiley-vch.de/vch/journals/2520/SRI_files/ICTP_Band_1/Special_Topics/979-984_Sca.pdf

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Journal Article] Design and Evaluation of Heat Assisted Microforming System2011

    • Author(s)
      H.Tabnabe, M.Yang
    • Journal Title

      Steel research international

      Volume: (2011 Special Edition) Pages: 1020-1024

    • URL

      http://www.wiley-vch.de/vch/journals/2520/SRI_files/ICTP_Band_1/Special_Topics/1020-1024_D.pdf

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Journal Article] Investigation on Deformation Characteristics of Surface Asperities of Metallic Foils Using Vibration-assisted Micro-forming2011

    • Author(s)
      Y.Bai, K.Nishikawa, M.K.Roy, M.Yang
    • Journal Title

      Steel research international

      Volume: (2011 Special Edition) Pages: 956-961

    • URL

      http://www.wiley-vch.de/vch/journals/2520/SRI_files/ICTP_Band_1/Special_Topics/956-961_Inv.pdf

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Journal Article] Deformation Behavior of Ultra-Thin Metal Foils in Strip Drawing Friction Test2010

    • Author(s)
      T. Shimizu, K. Manabe, M. Yang
    • Journal Title

      Key Engineering Materials Vol.443

      Pages: 110-115

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Deformation Behavior of Ultra-Thin Metal Foils in Strip Drawing Friction Test2010

    • Author(s)
      T.Shimizu, K.Manabe, M.Yang
    • Journal Title

      Key Engineering Materials

      Volume: Vol.443 Pages: 110-115

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Deformation Behavior of Ultra-thin Metal Foils in Strip Drawing Friction Test2010

    • Author(s)
      T.Shimizu, K.Manabe, M.Yang
    • Journal Title

      Key Engineering Materials Vol.443

      Pages: 110-115

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Surface Treatment of Micro Dies for Improving Tribological Properties2008

    • Author(s)
      Ming Yang
    • Journal Title

      Journal of Steel research International Vol.2

      Pages: 421-426

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Application of Ion Irradiation for Surface Finish of Micro Forming Die2008

    • Author(s)
      Ming Yang, Atsushi Osako
    • Journal Title

      Journal of Materials Processing Technology Vol. 201

      Pages: 315-318

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Application of Ion Irradiation for Surface Finish of Micro Forming Die2008

    • Author(s)
      Ming Yang, Atsushi Osako
    • Journal Title

      Journal of Materials Processing Technology Vol.201

      Pages: 315-318

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Validation of FE Simulation Based on Surface Roughness Model in Micro Deep Drawing2008

    • Author(s)
      K. Manabe, T. Shimizu, H. Koyama, M. Yang K. Ito
    • Journal Title

      Journal of Materials Processing Technology Vol.204

      Pages: 89-93

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Validation of FE Simulation Based on Surface Roughness Model in Micro Deep Drawing2008

    • Author(s)
      K. Manabe, T. Shimizu, H. Koyama, M. Yang, K. Ito
    • Journal Title

      Journal of Materials Processing Technology Vol. 204

      Pages: 89-93

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Measurement of Metal Forming based on Information of Die2007

    • Author(s)
      Ming, YANG
    • Journal Title

      J. of the Japan Society for Precision Engineering 73-2

      Pages: 197-182

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Journal Article] 金型計測情報に基づく塑性加工プロセス情報の計測2007

    • Author(s)
      楊 明
    • Journal Title

      精密工学会誌 73-2

      Pages: 179-182

    • NAID

      110006163394

    • Data Source
      KAKENHI-PROJECT-17360357
  • [Journal Article] 金型内蔵センサーシステムを用いた曲げ加工計測 第5報 センサー情報の安定化2006

    • Author(s)
      小山 純一, 楊 明, 今井 一成
    • Journal Title

      第57回塑性加工連合講演会講演論文集

      Pages: 89-90

    • Data Source
      KAKENHI-PROJECT-17360357
  • [Journal Article] 金型内蔵センサーシステムを用いた曲げ加工計測 第4報2005

    • Author(s)
      小山 純一, 楊 明, 今井 一成
    • Journal Title

      第56回塑性加工連合講演会講演論文集

      Pages: 447-448

    • Data Source
      KAKENHI-PROJECT-17360357
  • [Journal Article] Development of die-embedded micro sensing system for bending process2005

    • Author(s)
      Ming Yang, Jun-ichi Koyama
    • Journal Title

      Proc.of the 8^<th> ESAFORM Conference on Material Forming Vol.1

      Pages: 289-292

    • Data Source
      KAKENHI-PROJECT-17360357
  • [Journal Article] Finite Element Analysis of Micro Cup Drawing Process Using Tool and Blank Models with Surface Roughness2005

    • Author(s)
      K.Manabe, H.Koyama, H.Nouka, M.Yang, K.Ito
    • Journal Title

      Proc.of the 8^<th> Inter.Conf.on Technol.of Plasticity (CD-ROM)

    • Data Source
      KAKENHI-PROJECT-17360357
  • [Journal Article] データマイニングを用いた金属成形の知的センシング2005

    • Author(s)
      王 嵬, 楊 明
    • Journal Title

      平成17年度塑性加工春季講演会講演論文集

      Pages: 341-342

    • Data Source
      KAKENHI-PROJECT-17360357
  • [Journal Article] Development of the CAE-assisted Nano-indentation Method for the Evaluation of the Anisotropic Mechanical-properties of Thin Films2004

    • Author(s)
      T.SASAKI, M.YANG, S.FUKUSHIMA.R.TSUKANO
    • Journal Title

      Journal of Materials Processing Technology 151,No.1-3

      Pages: 263-267

    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] Hydroforming Process Optimization of Aluminum Alloy Tube Using Intelligent Control Technique2004

    • Author(s)
      K.Manabe, M.Suetake, H.Koyama, M.Yang
    • Journal Title

      Proceedings of the 1^<st> International Conference on New Forming Technology

      Pages: 73-78

    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Measuring the Fatigue Properties of Thin Films2004

    • Author(s)
      J.M.CAIRNEY, R.TSUKANO, M.YANG, M.J.HOFFMAN
    • Journal Title

      Proc.of Thin Films 2004 & Nanotech 2004 2004-1

    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] Measuring the Fatigue Properties of Thin Films2004

    • Author(s)
      J.M.CAIRNEY, R.TSUKANO, M.YANG, M.J.HOFFMAN
    • Journal Title

      Proc. of Thin Films 2004 & Nanotech 2004 2004-1

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] Hydroforming Process Optimization of Aluminum Alloy Tube Using Intelligent Control Technique2004

    • Author(s)
      K.Manabe, M.Suetake, H.Koyama, M.Yang
    • Journal Title

      Proceedings of the 1^<st> International Conference on New Forming Technology, (ICNFT)

      Pages: 73-78

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Optimal Control of Tube Hydroforming Process2004

    • Author(s)
      K.Akimoto, M.Suetake, K.Manabe, M.Yang
    • Journal Title

      Proceedings of 43^<rd> Annual Graduation Project Conference for Student Members of JSME, (in Japanese)

      Pages: 245-246

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Development of the CAE-assisted Nano-indentation Method for the Evaluation of the Anisotropic Mechanical-properties of Thin Films2004

    • Author(s)
      T.SASAKI, M.YANG, S.FUKUSHIMA, R.TSUKANO
    • Journal Title

      Journal of Materials Processing Technology 151, No. 1-3

      Pages: 263-267

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] Hydroforming Process optimization of Aluminum Alloy Tube Using Intelligent Control Technique2004

    • Author(s)
      K.Manabe, M.Suetake, H.Koyama, M.Yang
    • Journal Title

      Proceedings of the 1^<st> International Conference on New Forming Technology (ICNFT)

      Pages: 73-78

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Measuring the Fatigue Properties of Thin Films2004

    • Author(s)
      J.M.CAIRNEY, R.TSUKANO, M.YANG, M.J.HOFFMAN
    • Journal Title

      Proc.of Thin Films 2004 & Nanotech 2004 2004-1

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] Development of the CAE-assisted Nano-indentation Method for the Evaluation of the Anisotropic Mechanical-properties of Thin Films2004

    • Author(s)
      T.SASAKI, M.YANG, S.FUKUSHIMA, R.TSUKANO
    • Journal Title

      Journal of Materials Processing Technology 151, No.1-3

      Pages: 263-267

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] チューブハイドロフォーミングの最適制御2003

    • Author(s)
      秋元健太郎, 末武正充, 真鍋健一, 楊明
    • Journal Title

      日本機械学会関東支部代43回学生員卒業研究発表講演会

      Pages: 235-246

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Development of Intelligent Tube Hydroforming System2003

    • Author(s)
      M.Suetake, K.Manabe, S.Miyamoto, H.Koyama, T.Yagami, M.Yang
    • Journal Title

      Proceedings of 54th Jpn. Joint Conf. Tech. Plasticity, (in Japanese)

      Pages: 333-334

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Development of Tube Hydroforming with Intelligent Process Control System2003

    • Author(s)
      M.Suetake, K.Manabe, S.Miyamoto, H.Koyama, T.Yagami, M.Yang
    • Journal Title

      Proceedings of International Workshop on Tube Hydroforming (TUBEHYDRO2003)

      Pages: 7-12

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] 知的制御チューブハイドロフォーミングシステムの試作2003

    • Author(s)
      末武正充, 真鍋健一, 宮本俊介, 小山寛, 谷上哲也, 楊 明
    • Journal Title

      第54回塑性加工連合講演会論文集

      Pages: 333-334

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Development of Tube Hydroforming with Intelligent Process Control System2003

    • Author(s)
      M.Suetake, K.Manabe, S.Miyamoto, H.Koyama, T.Yagami, M.Yang
    • Journal Title

      Proceedings of International Workshop on Tube Hydroforming (TUBCHYDRO2003)

      Pages: 7-12

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Presentation] Inverstigation on Deformation Behavior in the Surface of Metal Foil with Ultrasonic Vibration-assisted Micro-forging2021

    • Author(s)
      Zindong Yin, Ming Yang
    • Organizer
      The 13th Asian Worshop on Micro/Nano Formiong Technology/The 3rd Asian Pacific Symposium on Technology of Plasticity (AWMFT & APSTP 2021)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H02481
  • [Presentation] SiC/hBNナノ多層膜金型コーティングがチタン鍛造に及ぼす影響2018

    • Author(s)
      木原 武志, 中村 浩, 金 勇, 安原 重雄, 森河 和雄, 白鳥 智美, 尾ノ井 正裕, 立花 昇一, 清水 徹英, 楊 明
    • Organizer
      平成30年度塑性加工春季講演会
    • Data Source
      KAKENHI-PROJECT-16H04540
  • [Presentation] Synthesis of SiC/hBN Nano-laminated Coating Films by Atomic Layer Deposition and its Anti-adhesive Properties for Titanium2018

    • Author(s)
      Ken Ishimaru,Jin Yong, Shigeo Yasuhara, Tetsuhide Shimizu, Ming Yang
    • Organizer
      The 11th Asian Workshop on Micro/Nano Forming Technology (AWMFT2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16H04540
  • [Presentation] 原子層堆積法によるSiC/hBNナノ多層膜の形成と耐チタン凝着特性評価2018

    • Author(s)
      石丸兼, 金勇, 安原重雄, 森河和雄, 木原武志, 清水徹英, 楊明
    • Organizer
      平成30年度塑性加工春季講演会
    • Data Source
      KAKENHI-PROJECT-16H04540
  • [Presentation] 高密度イオン化PVD法によるAlTiNの残留応力制御とそのナノ積層化の効果2017

    • Author(s)
      清水徹英、高橋秀治、小宮英敏、寺西義一、楊明
    • Organizer
      第68回塑性加工連合講演会
    • Data Source
      KAKENHI-PROJECT-16H04540
  • [Presentation] The effect of Geometrical Paramieters of Micro-Textured DLC Coatings on Tribological Properties under Dry Sliding Friction2017

    • Author(s)
      Hironori Kan, Tetsuhide Shimizu, Yang Ming
    • Organizer
      The 1st Asia Pacific Symposium on Technology of Plasticity
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16H04540
  • [Presentation] Development of micro pump actuated by oxidative expansion of Fe powder2016

    • Author(s)
      Hironori KAN, Tetsuhide SHIMIZU, Ming YANG
    • Organizer
      4M/IWMF 2016
    • Place of Presentation
      リュンビュー(デンマーク)
    • Year and Date
      2016-09-15
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14184
  • [Presentation] Effect of Heating on Springback in Heat Assisted Microbending2013

    • Author(s)
      Tatsuya Aoyama, Tetsuhide SHIMIZU, Qiu Zheng, Ming YANG
    • Organizer
      16th International Conference on Advances in Materials & Processing Technologies (AMPT 2013)
    • Place of Presentation
      台湾・台北市・台北圓山大飯店
    • Year and Date
      2013-09-26
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Tensile Property of Electrochemically Polished Titanium Alloy2013

    • Author(s)
      Takashi IKUSHIMA, Tetsuhide SHIMIZU, Ming YANG
    • Organizer
      16th International Conference on Advances in Materials & Processing Technologies (AMPT 2013)
    • Place of Presentation
      台湾・台北市・台北圓山大飯店
    • Year and Date
      2013-09-23
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Aluminum Foils Surface Deformation Using Vibration-assisted Micro-forging2012

    • Author(s)
      Yang Bai, Ming Yang
    • Organizer
      The 9オーストリア・ウィーン・EURO PLAZA Conference Centerth International Conference on Multi-material Micro Manufacture (4M 2012)
    • Place of Presentation
      オーストリア・ウィーン・EURO PLAZA Conference Center
    • Year and Date
      2012-10-10
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Micro forming with assistance of high-density energies2012

    • Author(s)
      Ming Yang
    • Organizer
      The 5th Asian Workshop on Micro/Nano Forming Technology (AWMFT 2012)
    • Place of Presentation
      中国・ハルピン市・Sinoway Hotel
    • Year and Date
      2012-08-24
    • Invited
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Improvement in processing accuracy of micro parts by ultrasonic vibration assisted forging2012

    • Author(s)
      Shingo Kosuge, Ming Yang
    • Organizer
      The 15th International Conference on Advances in Materials & Processing Technologies (AMPT 2012)
    • Place of Presentation
      オーストラリア・ウーロンゴン・Novotel Wollongong Northbeach Hotel
    • Year and Date
      2012-09-26
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Investigation of surface deformation using vibration-assisted micro-forging2012

    • Author(s)
      Yang Bai, Ming Yang
    • Organizer
      The 15th International Conference on Advances in Materials & Processing Technologies (AMPT 2012)
    • Place of Presentation
      オーストラリア・ウーロンゴン・Novotel Wollongong Northbeach Hotel
    • Year and Date
      2012-09-25
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] High-density energy assisted micro forming for fabrication of metallic devices2012

    • Author(s)
      Ming Yang, Hiroyuki Tanabe, Tetsuhide Shimizu
    • Organizer
      The 15th International Conference on Advances in Materials & Processing Technologies (AMPT 2012)
    • Place of Presentation
      オーストラリア・ウーロンゴン・Novotel Wollongong Northbeach Hotel
    • Year and Date
      2012-09-24
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Development of Precise Micro Press Forming System for Fabrication of Micro Parts2011

    • Author(s)
      M.Yang. T.Aizawa, S.Nakano, K.Ito
    • Organizer
      10th International Conference on Technology of Plasticity, ICTP2011
    • Place of Presentation
      Eurogress Convention Center
    • Year and Date
      2011-09-26
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Evaluation of deformation characteristic in ultrasonic vibration assisted foil bending2011

    • Author(s)
      Shingo KOSUGE, Ming YANG
    • Organizer
      4th Asian Workshop on Nano/Micro Forming Technology
    • Place of Presentation
      ホテル日航豊橋
    • Year and Date
      2011-10-27
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Application of heat assistance to microforming2011

    • Author(s)
      Hiroyuki Tanabe, Ming Yang
    • Organizer
      4th Asian Workshop on Nano/Micro Forming Technology
    • Place of Presentation
      豊橋市・ホテル日航豊橋
    • Year and Date
      2011-10-27
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Evaluation of deformation characteristic in ultrasonic vibration assisted foil bending2011

    • Author(s)
      Shingo KOSUGE, Ming Yang
    • Organizer
      4th Asian Workshop on Nano/Micro Forming Technology
    • Place of Presentation
      豊橋市・ホテル日航豊橋
    • Year and Date
      2011-10-27
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Effect of low frequency vibration on metallic surface deformation2011

    • Author(s)
      Yang Bai, Ming Yang
    • Organizer
      4th Asian Workshop on Nano/Micro Forming Technology
    • Place of Presentation
      豊橋市・ホテル日航豊橋
    • Year and Date
      2011-10-27
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Transitional Adhesion Behavior of Stainless Steel Foils in Dry Progressive Micro Deep Drawing Process2011

    • Author(s)
      Tetsuhide Shimizu, Yushiro Murashige, Ming Yang, Ken-ichi Manabe
    • Organizer
      the 6th International Conference of MicroManufacturing (ICOMM2011)
    • Place of Presentation
      東京電機大学(東京都)
    • Year and Date
      2011-03-09
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] 箔材の超音波援用曲げ加工における変形特性評価2011

    • Author(s)
      小菅慎吾, 楊明
    • Organizer
      日本機械学会2011年度年次大会
    • Place of Presentation
      東京工業大学大岡山キャンパス
    • Year and Date
      2011-09-13
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Development of Precise Micro Press Forming System for Fabrication of Micro Parts2011

    • Author(s)
      M.Yang, T.Aizawa, S.Nakano, K.Ito
    • Organizer
      10th International Conference on Technology of Plasticity (ICTP2011)
    • Place of Presentation
      ドイツ・アーヘン・Eurogress Convention Center
    • Year and Date
      2011-09-26
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] 熱援用マイクロ塑性加工システムの設計と評価2011

    • Author(s)
      田辺啓之, 楊明
    • Organizer
      日本機械学会2011年度年次大会
    • Place of Presentation
      東京工業大学大岡山キャンパス
    • Year and Date
      2011-09-12
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Effect of low frequency vibration on metallic surface doformation2011

    • Author(s)
      Yang Bai, Ming Yang
    • Organizer
      4th Asian Workshop on Nano/Micro Forming Technology
    • Place of Presentation
      ホテル日航豊橋
    • Year and Date
      2011-10-27
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Application of heat assistance to microforming2011

    • Author(s)
      Hiroyuki Tanabe, Ming Yang
    • Organizer
      4th Asian Workshop on Nano/Micro Forming Technology
    • Place of Presentation
      ホテル日航豊橋
    • Year and Date
      2011-10-27
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] EVALUATION OF TRIBOLOGICAL CHARACTERISTICS FOR MICRO DIES2010

    • Author(s)
      Ming YANG
    • Organizer
      International Forum on Micro Manufacturing 2010 (IFMM'10)
    • Place of Presentation
      長良川国際会議場(岐阜県)
    • Year and Date
      2010-10-22
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] 電子ビームによる金属箔材溶接に関する研究2010

    • Author(s)
      藤岡正治, 楊明
    • Organizer
      日本機械学会2010年度年次大会
    • Place of Presentation
      名古屋工業大学(愛知県)
    • Year and Date
      2010-09-07
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] EVALUATION OF TRIBOLOGICAL CHARACTERISTICS FOR MICRODIES2010

    • Author(s)
      Ming YANG, Yu Kimura, Kazuo Morikawa
    • Organizer
      International Forum on Micro Manufacturing 2010 (IFMM'10)
    • Place of Presentation
      長良川国際会議場(岐阜県)
    • Year and Date
      2010-10-22
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Welding of metallic foil and thin wire with electron beam2010

    • Author(s)
      S.Fujioka, M.YANG
    • Organizer
      International Conference on Advances in Materials and Processing Technologies (ANPT2010)
    • Place of Presentation
      Arts et Metiers ParisTech(パリ・フランス)
    • Year and Date
      2010-10-25
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Adhesive Wear on Dry Sliding Surface in Miniaturization of Deep-drawing Process2010

    • Author(s)
      T.Shimizu, Y.Murashige, K.Ito, M.Yang, K.Manabe
    • Organizer
      International Conference on Materials Processing Technology 2010, MAPT2010
    • Place of Presentation
      タイ・バンコク市
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Suface Modification of Sheets Metal by Vibration-Assisted Micro Forging2010

    • Author(s)
      K.Nishikawa, M.K.Roy, M.Yang
    • Organizer
      The 3rd Asian Workshop on Nano/Micro Formingtechnology (AWMDT-2010)
    • Place of Presentation
      ラマダ・プラザ・ホテル(済州・韓国)
    • Year and Date
      2010-10-08
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Deformation Behavior of Ultra-thin Metal Foils in Strip Drawing Friction Test2010

    • Author(s)
      T.Shimizu, K.Manabe, M.Yang
    • Organizer
      The 9th Asia-Pacific Conference on Materials Processing (APCMP2010)
    • Place of Presentation
      University of New South Wales(オーストラリア・シドニー)
    • Year and Date
      2010-06-09
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Surface Modification of Sheets Metal by Vibration-Assisted Micro Forging2010

    • Author(s)
      M. Yang
    • Organizer
      The 3rd Asian Workshop on Nano/Micro Forming Technology (AWMDT-2010)
    • Place of Presentation
      ラマダ・プラザ・ホテル(済州・韓国)
    • Year and Date
      2010-10-08
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Plastic Deformation in Surface Layer of Metal Foil in Strip Drawing Test2010

    • Author(s)
      T.Shimizu, K.Manabe, M.Yang, K.Ito
    • Organizer
      The 4th International Conference on Tribology in Manufacturing Processes (ICTMP2010)
    • Place of Presentation
      Acropolis, exhibition centre(フランス・ニース)
    • Year and Date
      2010-06-14
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Surface Modification of Titallium Sheets Metal by Micro-forging2010

    • Author(s)
      K.Nishikawa, M.Yang, M.K.Roy, K.Morikawa
    • Organizer
      The 5th International Conference on MicroManufacturing (ICOMM/4M 2010)
    • Place of Presentation
      University of Wisconsin-(アメリカ・マディソン)
    • Year and Date
      2010-04-07
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] A Precise Forming System for Fabrication of Micro Metallic Devices2009

    • Author(s)
      M. Yang
    • Organizer
      AWNFT-2009
    • Place of Presentation
      長沙市・中国
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] マイクロ金型のトライボロジー特性評価2009

    • Author(s)
      木村悠, 楊明
    • Organizer
      日本機械学会2009年度年次大会
    • Place of Presentation
      岩手大学(盛岡市)
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] マイクロ一体成形による金属バルブの創製2009

    • Author(s)
      楊明, 伊藤國吉, 椛澤康成
    • Organizer
      第60回塑性加工連合講演会
    • Place of Presentation
      信州大学(長野市)
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Fabrication of Micro Metallic Valve and Pump2009

    • Author(s)
      Ming Yang, Yasunori Kabasawa, Kuniyoshi Ito
    • Organizer
      The 4th Inernational Conference on Experimental Mechanics (ICEM2009)
    • Place of Presentation
      シンガポール
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] A Precise Forming System for Fabrication of Micro Metallic Devices2009

    • Author(s)
      M.Yang, K.Ito, S.Nakano
    • Organizer
      AWNFT-2009
    • Place of Presentation
      中国・長沙市
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Surface Treatment of Micro Dies for Improving Tribologica Properties2008

    • Author(s)
      Ming Yang
    • Organizer
      The 12th International Conference METAL FORMING 2008
    • Place of Presentation
      ポーランド
    • Year and Date
      2008-09-23
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] アルミニウム合金箔材の表面特性が及ぼすマイクロ深絞り性への影響2008

    • Author(s)
      清水徹英, 小川真弘, 楊明
    • Organizer
      第59回塑性加工連合講演会
    • Place of Presentation
      広島
    • Year and Date
      2008-11-09
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Design and Fabrication of Metallic MEMS2008

    • Author(s)
      Ming Yang
    • Organizer
      The 9th International Conference on Technology of Plasticity (ICTP 2008)
    • Place of Presentation
      慶州, 韓国
    • Year and Date
      2008-09-10
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Design and Fabrication of Metallic MEMS2008

    • Author(s)
      Ming Yang
    • Organizer
      The 9th International Conference on Technology of Plasticity (ICTP 2008)
    • Place of Presentation
      Hotel Hyundai(慶州・韓国)
    • Year and Date
      2008-09-10
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] マイクロ深絞り成形性に及ぼす金型表面性状の影響に関する実験的検討2008

    • Author(s)
      清水徹英, 真鍋健一, 伊藤國吉, 楊明
    • Organizer
      平成20年度塑性加工春季講演会
    • Place of Presentation
      津田沼
    • Year and Date
      2008-05-24
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Instrumentation System for V-bending Process Using Die-embedded Micro-sensors2007

    • Author(s)
      M. Yang, J. Koyama, K. Imai
    • Organizer
      Proc. of 2007 Japanese spring conf. For the Tech. Of Plasticity
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] 金型内蔵センサーシステムを用いた曲げ加工計測 第6報 -センサー固定部の改良-2007

    • Author(s)
      小山 純一, 楊 明, 今井 一成
    • Organizer
      平成19年度塑性加工春季講演会
    • Place of Presentation
      名古屋
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Instrumentation System for V-bending Process Using Die-embedded Micro-sensors2007

    • Author(s)
      M. Yang, J. Koyama
    • Organizer
      Proc. of JSME annual conf
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] 金型内蔵センサーシステムを用いた曲げ加工計測2007

    • Author(s)
      小山 純一, 楊 明
    • Organizer
      日本機械学会2007年度年次大会
    • Place of Presentation
      大阪
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] 金型内蔵センサーシステムを用いた曲げ加工計測第6報の改良-2007

    • Author(s)
      小山 純一, 楊 明, 今井 一成
    • Organizer
      平成19年度塑性加工奉季講演会
    • Place of Presentation
      愛知県名古屋市
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Development of die-embedded micro sensing system for sheet metal forming2007

    • Author(s)
      Ming Yang, Jun-ichi Koyama
    • Organizer
      The 3rd International Symposium on Advanced Technology for Plasticity
    • Place of Presentation
      中国・南昌
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] 金型内蔵センサーシステムを用いた曲げ加工計測2007

    • Author(s)
      小山 純一, 楊 明
    • Organizer
      日本機械学会2007年度年次大会
    • Place of Presentation
      大阪府吹田市
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] 金型内蔵センサーシステムを用いた曲げ加工計測 第5報センサー情報の安定化2006

    • Author(s)
      小山 純一, 楊 明, 今井 一成
    • Organizer
      第57回塑性加工連合講演会
    • Place of Presentation
      新潟県高岡市
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Instrumentation System for V-bending Process Using Die-embedded Micro-sensors2006

    • Author(s)
      J, Koyama, M, Yang, K, Imai
    • Organizer
      Proc. of 56th Japanese Joint conf. For the Tech. Of Plasticity
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Development of die-embedded micro sensing system for bending process2005

    • Author(s)
      Ming Yang, Jun-ichi Koyama
    • Organizer
      The 8th ESAFORM Conference on Material Forming
    • Place of Presentation
      ルーマニア・クルジューナポカ
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Development of die-embedded micro sensing system for bending process2005

    • Author(s)
      Ming, Yang, Jun-ichi, Koyama
    • Organizer
      Proc. of the 8th ESAFORM Conference on Material Forming
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] データマイニングを用いた金属成形の知的センシング2005

    • Author(s)
      王 嵬, 楊 明
    • Organizer
      平成17年度塑性加工春季講演会
    • Place of Presentation
      新潟県三条市
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Instrumentation System for V-bending Process Using Die-embedded Micro-sensors Vol.32005

    • Author(s)
      Juin-ichi, Koyama, Ming, Yang
    • Organizer
      Proc. of 2005 Japanese spring conf. For the Tech. Of Plasticity
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Finite Element Analysis of Micro Cup Drawing Process Using Tool and Blank Models with Surface Roughness2005

    • Author(s)
      K.Manabe, H.Koyama, H.Nouka, M.Yang, K.Ito
    • Organizer
      The 8th Inter.Conf.on Technol.of Plasticity
    • Place of Presentation
      イタリア・ベローナ
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] 金型内蔵センサーシステムを用いた曲げ加工計測第4報2005

    • Author(s)
      小山 純一, 楊 明, 今井 一成
    • Organizer
      第56回塑性加工連合講演会
    • Place of Presentation
      沖縄県那覇市
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Instrumentation System for V-bending Process Using Die-embedded Micro-sensors Vol.42005

    • Author(s)
      J, Koyama, M, Yang, K, Imai
    • Organizer
      Proc. of 56th Japanese Joint conf. For the Tech. Of Plasticity
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Instrumentation System for V-bending Process Using Die-embedded Micro-sensors Vol.22004

    • Author(s)
      M, Yang, J, Koyama, K, Imai, Y, Kageyama
    • Organizer
      Proc. of 55th Japanese Joint conf. For the Tech. Of Plasticity
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Instrumentation System for V-bending Process Using Die-embedded Micro-sensors Vol.12003

    • Author(s)
      J, Ren, M, Yang, J, Koyama, T, Sasakura
    • Organizer
      Proc. of 54th Japanese Joint conf. For the Tech. Of Plasticity
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Development of microforming process combined with selective chemical vapor deposition

    • Author(s)
      Kazushi Koshimizu, Tetsuhide Shimizu, Ming Yang
    • Organizer
      The 4th International Conference on New Forming Technology (ICNFT2015)
    • Place of Presentation
      グラスゴー(イギリス)
    • Year and Date
      2015-08-06 – 2015-08-09
    • Data Source
      KAKENHI-PROJECT-25630331
  • [Presentation] Development of Scaled Strip Drawing Friction Tester for Micro-Sheet Metal Forming

    • Author(s)
      Tetsuhide Shimizu, Ming Yang, Ken-ichi Manabe
    • Organizer
      The 5th Asian Workshop on Micro/Nano Forming Technology (AWMFT 2012)
    • Place of Presentation
      Harbin, China
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Development of die-embedded micro sensing system for sheet metal forming

    • Author(s)
      Ming, Yang, Juin-ichi, Koyama
    • Organizer
      Proc. of the 3rd International Symposium on Advanced Technology for Plasticity
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] プレス成形/薄膜転写プロセスの開発

    • Author(s)
      輿水和志,清水徹英,楊明
    • Organizer
      日本機械学会2014年度年次大会
    • Place of Presentation
      東京電機大学 東京千住キャンパス
    • Year and Date
      2014-09-07 – 2014-09-10
    • Data Source
      KAKENHI-PROJECT-25630331
  • [Presentation] Development of microforming process combined with thin film transfer printing

    • Author(s)
      Kazushi Koshimizu, Qiu Zheng, Tetsuhide Shimizu, Ming Yang
    • Organizer
      The 7th Asian Workshop on Micro/Nano Formiong Technology (AWMFT2014)
    • Place of Presentation
      台北(台湾)
    • Year and Date
      2014-11-09 – 2014-11-12
    • Data Source
      KAKENHI-PROJECT-25630331
  • [Presentation] 金属の超音波援用微細構造転写加工における変形特性評価

    • Author(s)
      小菅 慎吾,楊 明
    • Organizer
      第63回塑性加工連合講演会
    • Place of Presentation
      北九州市
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Micro forming with assistance of high-density enegies

    • Author(s)
      Ming Yang
    • Organizer
      The 5th Asian Workshop on Micro/Nano Forming Technology (AWMFT 2012)
    • Place of Presentation
      Harbin, China
    • Invited
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Aluminium Foils Surface Deformation Using Vibration-assisted Micro-forging

    • Author(s)
      Yang Bai, Ming Yang
    • Organizer
      The 9th International Conference on Multi-Material Micro Manufacture (4M 2012)
    • Place of Presentation
      Vienna, Austria
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] 熱援用マイクロ曲げ試験における極薄純チタン箔材のスプリングバック量低減効果の検討

    • Author(s)
      青山達哉,清水徹英,楊明
    • Organizer
      第64回塑性加工連合講演会
    • Place of Presentation
      吹田市・大阪大学吹田キャンパス
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] 超音波縦振動を用いた極薄金属箔材接合に関する基礎的検討

    • Author(s)
      山口諒,清水徹英,楊明
    • Organizer
      平成25年度塑性加工春季講演会
    • Place of Presentation
      名古屋市・大同大学
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Improvement in processing accuracy of micro parts by ultrasonic vibration assist-ed forging

    • Author(s)
      Shingo Kosuge, Ming Yang
    • Organizer
      The 15th International Conference on Advances in Materials&Processing Technologies (AMPT 2012)
    • Place of Presentation
      Wollongong, Australia
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Investigation of surface deformation using vibration-assisted micro-forging

    • Author(s)
      Yang Bai, Ming Yang
    • Organizer
      The 15th International Conference on Advances in Materials&Processing Technologies (AMPT 2012)
    • Place of Presentation
      Wollongong, Australia
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Study on effect of vibration time on metal foil surface finishing

    • Author(s)
      Yang Bai, Ming Yang
    • Organizer
      第63回塑性加工連合講演会
    • Place of Presentation
      北九州市
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] 超音波鍛造による微小部品の加工精度向上

    • Author(s)
      小菅 慎吾,楊 明
    • Organizer
      日本機械学会2012年度年次大会
    • Place of Presentation
      金沢市
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] 熱援用マイクロ塑性加工システムの開発と金属箔材成形への適用

    • Author(s)
      清水 徹英,田辺 啓之,楊 明
    • Organizer
      熱援用マイクロ塑性加工システムの開発と金属箔材成形への適用
    • Place of Presentation
      北九州市
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] High-density energy assisted micro forming for fabrication of metallic devices

    • Author(s)
      Ming Yang, Hiroyuki Tanabe, Tetsuhide Shimizu
    • Organizer
      The 15th International Conference on Advances in Materials&Processing Technologies (AMPT 2012)
    • Place of Presentation
      Wollongong, Australia
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Effect of Heating on Springback in Heat Assisted Microbending

    • Author(s)
      Tatsuya Aoyama, Tetsuhide Shimizu, Qiu Zheng, Ming Yang
    • Organizer
      16th International Conference on Advances in Materials & Processing Technologies (AMPT 2013)
    • Place of Presentation
      台湾・台北市・台北圓山大飯店
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Thinning of Ti-6Al-4V Titanium Alloy Sheets by Electrochemical Etching and Its Tensile Property

    • Author(s)
      Takashi IKUSHIMA, Tetsuhide SHIMIZU, Ming YANG
    • Organizer
      6th Asian Workshop on Nano/Micro Forming Technology (AWMFT 2013)
    • Place of Presentation
      韓国・済州・Ramada Plaza Hotel
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] 電解エッチングによるTi-6Al-4Vチタン合金板材の極薄化とその超塑性特性評価

    • Author(s)
      幾島崇,清水徹英,楊明
    • Organizer
      日本機械学会第21回機械材料・材料加工技術講演会
    • Place of Presentation
      八王子市・首都大学東京南大沢キャンパス
    • Data Source
      KAKENHI-PROJECT-23360327
  • 1.  MANABE Kenーichi (10145667)
    # of Collaborated Projects: 12 results
    # of Collaborated Products: 23 results
  • 2.  SHIMIZU Tetsuhide (70614543)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 11 results
  • 3.  NISHIMURA Hisashi (70087170)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 4.  KAKUTA Akira (60224359)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 5.  FURUKAWA Yuji (10087190)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 6.  YOSHIHARA Shoichiro (00311001)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 7.  MORONUKI Nobuyuki (90166463)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 8.  HASEGAWA Osamu (80244416)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 9.  YOSIMURA Takuya (50220736)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 10.  TAKAHASHI Satoshi (80260785)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 11.  FURUSHIMA Tsuyoshi (30444938)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 12.  MIZUNUMA Hiroshi (20117724)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 13.  WATANABE Keizo (20072134)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 14.  酒井 孝 (50336517)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 15.  WAKAYAMA Shuichi (00191726)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 16.  SHIMA Susumu (70026160)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 17.  ENDOH Jyunichi (70016418)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 18.  WATANABE Tohru (70026136)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 19.  YAMAGUCHI Katsuhiko (90027805)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 20.  ASAKO Yutaka (20094253)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 21.  SAKUMA Hideo (20128573)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 22.  MASUDA Hideki (90190363)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 23.  OKUMURA Tugunori (00117699)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 24.  KANEKO Arata (30347273)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 25.  OGATA Satoshi (50315751)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 26.  KOYAMA Hiroshi (70345479)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 7 results
  • 27.  SASAHARA Hiroyuki (00205882)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 28.  韓 玉傑 (80372457)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 29.  森河 和雄 (60463048)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 30.  小宮 一毅 (40578001)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 31.  寺西 義一 (50463055)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 32.  NAKAMURA Yoshimitsu
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 33.  KAKUTANI Jyunichi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 34.  OKI Yosinori
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 35.  ANZAI Tetsuya
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 36.  YASUHARA Shigeo
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 3 results
  • 37.  KIHARA Takeshi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 38.  ISHIMARU Ken
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi