NAKAMOTO KEIICHI 中本圭一

… Alternative Names

NAKAMOTO Keiichi 中本圭一

Less

Researcher Number	90379339
Other IDs
Affiliation (Current)	2025: 東京農工大学, 工学(系)研究科(研究院), 教授
Affiliation (based on the past Project Information) *help	2024: 東京農工大学, 工学(系)研究科(研究院), 教授 2012 – 2021: 東京農工大学, 工学(系)研究科(研究院), 准教授 2015: 東京農工大学, 大学院工学研究院, 准教授 2013: 東京農工大学, 工学研究科, 准教授 2012: 東京農工大学, 大学院・工学研究院, 准教授 … More 2011: 大阪大学, 大学院・工学研究科, 招聘准教授 2011: 大阪大学, 工学(系)研究科(研究院), 招へい准教授 2009: 大阪大学, 工学研究科, 助教 2008: Osaka University, 大学院工学研究科, 助教 2007 – 2008: Osaka University, Dept. of Mechanical Engineering, Assistant Professor 2007: 神戸大学, 工学研究科, 助教 2004 – 2006: 神戸大学, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related / Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields Except Principal Investigator Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related
Keywords	Principal Investigator 機械工作・生産工学 / 工程設計 / 精密部品加工 / 超精密切削加工 / 切削加工 / 金型加工 / セッティング誤差 / 超精密計測 / ダイヤモンド工具 / パラレルメカニズム形工作機械 … More / DX / 機械加工 / マイクロテクスチャ / 複雑形状部品加工 / トポロジー最適化 / フライス加工 / マイクロ・ナノデバイス / 機上計測 / 多孔質材料 / 柔軟材料 / 把持具 / CAM / 工作機械 / 複合加工機 / 多軸制御工作機械 / 高速プロトタイピング / 知能機械 … More Except Principal Investigator CAM / CAD / モニタリング / アディティブ・マニュファクチャリング / 仕上げ面粗さ / 機械工作・生産工学 / 冷却 / 異種金属造形 / マグネシウム合金 / 精度 / 金属組織 / アーク放電 / NC processor / Reactive scheduling / Intelligent machine tool / Milling simulation / Voxel model / Milling process model / CAE / NCプロセッサ / リアクティブスケジューリング / 知能機械 / 切削シミュレーション / ボクセルモデル / 加工プロセスモデル / Planing / End Milling / Molds and Dies / Precision Cutting / Machining Center Spindle / Vibration Cutting / 円振動 / 切削力 / マシニングセンター / 楕円振動切削 / プレーナ加工 / エンドミル加工 / 金型 / 精密加工 / マシニングセンター主軸 / 振動切削 / 研削温度 / 砥石 / 研削油剤 / 研削加工 / 超精密マイクロ加工 / フライス加工 / 旋削加工 / ＣＡＭ / 難把持形状 / 高付加価値製品 / 柔軟材 / 複雑形状 / 複合加工機 / 巧妙加工 / 機械加工・生産工学 / 位置姿勢制御電極 / 放電加工 / 断面変化穴 / エンドミル工具 / 仕上げ面精度 / 金型鋼 / 超高速スピンドル / エンドミル / 表面粗さ / 工具摩耗 / マイクロ金型 / フライカット / 単結晶ダイヤモンド / 超精密切削 / 超精密加工 Less

機械加工のDX推進に向けて加工環境を反映した加工工程を計画するデジタル工程設計Principal Investigator
- Principal Investigator
  
  中本圭一
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Tokyo University of Agriculture and Technology
Function creation in additive manufacturing using Mg alloys and dissimilar metals with wire arc discharge
- Principal Investigator
  
  Sasahara Hiroyuki
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Tokyo University of Agriculture and Technology
Systematization of Process Planning for Machining Operations Based on Topology Optimization of WorkpiecePrincipal Investigator
- Principal Investigator
  
  NAKAMOTO Keiichi
- Project Period (FY)
  2018 – 2019
- Research Category
  
  Grant-in-Aid for Challenging Research (Exploratory)
- Review Section
  
  Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
- Research Institution
  Tokyo University of Agriculture and Technology
Development an Ultraprecision Cutting System for Highly Efficient Machining of Die Having Free-form Surface with Micro TexturesPrincipal Investigator
- Principal Investigator
  
  NAKAMOTO Keiichi
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Tokyo University of Agriculture and Technology
Complex 3D Shape Creation Based on Cutting Simulator and On-Machine Tool Shaping (Fostering Joint International Research)Principal Investigator
- Principal Investigator
  
  NAKAMOTO Keiichi
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Fund for the Promotion of Joint International Research (Fostering Joint International Research)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Form accuracy and soundness in wire + arc additive manufacturing of metal
- Principal Investigator
  
  Sasahara Hiroyuki
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Development of an autonomous ultra-precision machine tool having functions of on-machine measurement and tool shapingPrincipal Investigator
- Principal Investigator
  
  NAKAMOTO Keiichi
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Dexterous machining of soft objects by employing an aqueous solution of sodium acetatePrincipal Investigator
- Principal Investigator
  
  NAKAMOTO Keiichi
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Study on the optimization of grinding point environment by a direct supply of grinding fluid from inner side of the grinding wheel
- Principal Investigator
  
  Sasahara Hiroyuki
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Study on dexterous machining to create high value-added products
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Chubu University
Development of CAPP System for Multi-tasking Machining by using the physical model of machine toolsPrincipal Investigator
- Principal Investigator
  
  NAKAMOTO Keiichi
- Project Period (FY)
  2011 – 2012
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
  Osaka University
Creation of Cross Section's Changing Holes by means of Electrical Discharge Machining Using a Tool Electrode with Posture and Position Controllable Function
- Principal Investigator
  
  ISHIDA Tohru
- Project Period (FY)
  2008 – 2009
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka University
Ultra Precision Cutting of Steel with Single Crystal Diamond Tool
- Principal Investigator
  
  SHIBASAKA Toshirou
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kobe University
Development of a Support System of Process Planning for Multi-Axis Controlled Machine ToolsPrincipal Investigator
- Principal Investigator
  
  NAKAMOTO Keiichi
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka University
PKM形工作機械による自由曲面形状の高速・高精度加工に関する研究Principal Investigator
- Principal Investigator
  
  中本圭一
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kobe University
Study on smint NC processor which includes milling process model for process prediction to buill the next generation of machine tools
- Principal Investigator
  
  SHIRASE Keiichi
- Project Period (FY)
  2005 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kobe University
Development of Machining Center Spindle for Realizing Elliptical Vibration Cutting
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kobe University

[Journal Article] An Efficient Ultraprecision Machining System Automating Setting Operations of Roughly Machined Workpiece2021
- Author(s)
  M. Xu, K. Nakamoto, Y. Takeuchi
- Journal Title
  
  Journal of Manufacturing and Materials Processing
  
  Volume: Vol. 5, Issue 1 Issue: 1 Pages: 1-12
- DOI
  10.3390/jmmp5010011
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01347
[Journal Article] Compensation Method for Tool Setting Errors Based on Non-Contact On-Machine Measurement2020
- Author(s)
  M. Xu, K. Nakamoto, Y. Takeuchi
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 14 Issue: 1 Pages: 66-72
- DOI
  10.20965/ijat.2020.p0066
- NAID
  130007782569
- ISSN
  1881-7629, 1883-8022
- Year and Date
  2020-01-05
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01347, KAKENHI-PROJECT-16KK0144
[Journal Article] 工作物のトポロジー最適化に基づく荒加工工程の加工順序決定手法の提案2019
- Author(s)
  櫛野仁司, 熊野谿真帆, 中本圭一
- Journal Title
  
  日本機械学会論文集
  
  Volume: 85巻, 880号 Pages: 1-13
- NAID
  130007772933
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18K18804
[Journal Article] 多軸制御超精密切削加工の高能率化に向けたセッティング誤差補正に基づく工具とワークの自動取付け2019
- Author(s)
  北川　廉, 徐　萌, 中本圭一, 竹内芳美
- Journal Title
  
  精密工学会誌
  
  Volume: 85巻, 8号 Pages: 722-726
- NAID
  130007687571
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01347
[Journal Article] 多軸制御超精密切削加工の高能率化に向けたセッティング誤差補正に基づく工具とワークの自動取付け2019
- Author(s)
  北川　廉, 徐　萌, 中本圭一, 竹内芳美
- Journal Title
  
  精密工学会誌
  
  Volume: 85巻, 8号 Pages: 722-726
- NAID
  130007687571
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-16KK0144
[Journal Article] Dexterous Creation of Soccer-Ball Pattern by Using Urethane Rubber2016
- Author(s)
  K. Funatani, K. Nakamoto, A. Beaucamp, Y. Takeuchi
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 10 Pages: 239-243
- NAID
  130007674008
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26630022
[Journal Article] 多軸制御超精密切削加工の高能率化に向けたセッティング誤差補正手法の開発2016
- Author(s)
  田中匠太郎, 馬場慎之佑, 中本圭一, 竹内芳美
- Journal Title
  
  精密工学会誌
  
  Volume: 8２ Pages: 758-763
- NAID
  130005253480
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15H03900
[Journal Article] Dexterous Machining of Soft Objects by Means of Flexible Clamper2015
- Author(s)
  K. Nakamoto, T. Iizuka, Y. Takeuchi
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 9 Pages: 83-88
- NAID
  130007673783
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26630022
[Journal Article] 把持の難しい柔軟工作物の巧妙加工2013
- Author(s)
  中本圭一,植地亮太,竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 79巻808号 Pages: 4535-454
- NAID
  130003386511
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 把持の難しい柔軟工作物の巧妙加工2013
- Author(s)
  中本圭一、植地亮太、竹内芳美
- Journal Title
  
  日本機械学会論文集（Ｃ編）
  
  Volume: 79-808 Pages: 4535-4542
- NAID
  130003386511
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 超精密マイクロ加工のためのCAMシステムに関する研究-高アスペクト比形状の5軸加工に対応した工程設計-2012
- Author(s)
  小山泰明,中本圭一,竹内芳美
- Journal Title
  
  精密工学会誌
  
  Volume: 78巻,10号 Pages: 912-917
- NAID
  130003369675
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760113
[Journal Article] 複合加工機用CAPPシステムの開発2012
- Author(s)
  濱田大地,中本圭一,石田徹,竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 78巻,791号 Pages: 2698-2709
- NAID
  130002051518
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760113
[Journal Article] 複合加工機用CAPPシステムの開発2012
- Author(s)
  濱田大地, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 78-791 Pages: 2698-2709
- NAID
  130002051518
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 複数の曲がり円柱からなる複雑形状の巧妙加工2012
- Author(s)
  夏目矩行, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 78-786 Pages: 697-706
- NAID
  130002051336
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] マイクロ複雑形状の超精密巧妙加工2012
- Author(s)
  西山諒, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 78-792 Pages: 3085-3092
- NAID
  130002051550
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 複数の曲がり円柱からなる複雑形状の巧妙加工2012
- Author(s)
  夏目矩行、中本圭一、石田徹、竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 78巻786号 Pages: 697-706
- NAID
  130002051336
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] スクエアエンドミルを用いた同時 5 軸制御加工による中仕上げ加工の高効率化2012
- Author(s)
  夏目矩行, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 78-793 Pages: 3305-3316
- NAID
  130005031466
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining -Formulation of Post Processor-2010
- Author(s)
  Tohru ISHIDA, Eiki ISHIGURO, Masahiko KITA, Keiichi NAKAMOTO, Yoshimi TAKEUCHI
- Journal Title
  
  J. of Advanced Mechanical Design, Systems, and Manufacturing Vol.4,No.4(in press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760085
[Journal Article] Rapid Removal Volume Acquisition for Tool Posture Decision in 3+2-Axis Control Milling2008
- Author(s)
  K. NAKAMOTO, M. TSUNODA, K. SHIRASE, T. MORIWAKI
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.2, No.4
  
  Pages: 464-473
- NAID
  130000080846
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760088
[Journal Article] Rapid Removal Volume Acquisition for Tool Posture Decision in 3+2-Axis Control Milling2008
- Author(s)
  中本圭一
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.2
  
  Pages: 464-473
- NAID
  130000080846
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760088
[Journal Article] 5軸制御工作機械のための工程設計支援システムの開発(第1報)-ボクセルモデルを利用した除去領域の算出と工具経路の生成による工具姿勢の決定-2007
- Author(s)
  中本圭一, 稲岡孝彬, 白瀬敬一, 森脇俊道
- Journal Title
  
  精密工学会誌 73巻9号
  
  Pages: 1019-1024
- NAID
  110006420366
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17360063
[Journal Article] 5軸制御工作機械のための工程設計支援システムの開発(第1報) -ボクセルモデルを利用した除去領域の算出と工具経路の生成による工具姿勢の決定-2007
- Author(s)
  中本圭一, 稲岡孝彬, 白瀬敬一, 森脇俊道
- Journal Title
  
  精密工学会誌 73巻9号
  
  Pages: 1019-1024
- NAID
  110006420366
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17360063
[Journal Article] Development of a Process planning System for 5-axis Controlled Machine tool(1st Report)(in Japanese)2007
- Author(s)
  K. Nakamoto, T. Inaoka, K. Shirase, T. Moriwaki
- Journal Title
  
  Journal of the Japan Society for Precision Engineering Vol. 73 No. 9
  
  Pages: 1091-1024
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Journal Article] Development of a Circular Vibration Milling Attachment2005
- Author(s)
  N.HETTIARACHCHI, T.MORIWAKI, K.NAKAMOTO, H SARAIE, A.MOCHIZUKI
- Journal Title
  
  Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
  
  Pages: 443-448
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360071
[Journal Article] Development of Circular Vibration Milling Attachment2005
- Author(s)
  N.Hettiarachchi, T.Moriwaki, K.Nakamoto, H.Saraie, A.Mochizuki
- Journal Title
  
  Proc.of the Int.Conf.on Leading Edge Manufacturing in 21^<st> Century
  
  Pages: 443-448
- Data Source
  KAKENHI-PROJECT-16360071
[Presentation] Efficient Ultraprecision Machining System by Means of Industrial Robot2020
- Author(s)
  M. Xu, K. Nakamoto, Y. Takeuchi
- Organizer
  20th International Conference of the European Society for Precision Engineering and Nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01347
[Presentation] トポロジー最適化を用いて生成した工具経路による3次元形状加工に関する研究2020
- Author(s)
  櫛野仁司, 熊野谿真帆, 中本圭一
- Organizer
  2020年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-18K18804
[Presentation] On-Machine Diamond Tool Shaping of to Realize Highly Efficient Ultraprecision Machining System2020
- Author(s)
  M. Xu, N. Yokoyama, K. Nakamoto, Y. Takeuchi
- Organizer
  ASME 2020 International Symposium on Flexible Automation
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01347
[Presentation] Automated Workpiece Setting Operation and Its Errors Compensation on an Ultraprecision Machine Tool2019
- Author(s)
  M. Xu, R. Kitakawa, K. Nakamoto, Y. Takeuchi
- Organizer
  19th International Conference of the European Society for Precision Engineering and Nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01347
[Presentation] A Study on On-Machine Shaping of Diamond Tool to Realize Highly Efficient Ultraprecision Cutting2019
- Author(s)
  N. Yokoyama, M. Xu, K. Nakamoto, Y. Takeuchi
- Organizer
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01347
[Presentation] A Study on On-Machine Shaping of Diamond Tool to Realize Highly Efficient Ultraprecision Cutting2019
- Author(s)
  N. Yokoyama, M. Xu, K. Nakamoto, Y. Takeuchi
- Organizer
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16KK0144
[Presentation] A Study on Tool Path Generation During a Rough Machining Operation Based on Topology Optimization of Workpiece2019
- Author(s)
  H. Kushino, M. Kumanotani, K. Nakamoto
- Organizer
  International Conference on Design and Concurrent Engineering 2019 & Manufacturing Systems Conference 2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K18804
[Presentation] A Study on Tool Path Generation for Ultraprecision Cutting of Free Form Surface with Micro Texture2019
- Author(s)
  T. Hirano, K. Nakamoto, Y. Takeuchi
- Organizer
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16KK0144
[Presentation] A Study on Tool Path Generation for Ultraprecision Cutting of Free Form Surface with Micro Texture2019
- Author(s)
  T. Hirano, K. Nakamoto, Y. Takeuchi
- Organizer
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01347
[Presentation] 超精密切削加工の自動セッティングに向けたワークの取付け誤差補正に関する研究2019
- Author(s)
  北川　廉, 徐　萌, 中本圭一, 竹内芳美
- Organizer
  2019年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-18H01347
[Presentation] Proposal of Complex Parts Machining Securing Dynamic Stiffness of Workpiece During a Rough Machining Operation2019
- Author(s)
  M. Kumanotani, H. Kushino, K. Nakamoto
- Organizer
  8th International Conference on Manufacturing, Machine Design and Tribology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K18804
[Presentation] トポロジー最適化による動剛性を考慮した加工途中の工作物形状決定手法の提案2019
- Author(s)
  熊野谿真帆, 櫛野仁司, 中本圭一
- Organizer
  日本機械学会生産システム部門研究発表講演会2019
- Data Source
  KAKENHI-PROJECT-18K18804
[Presentation] 工作物のトポロジー最適化による荒加工工程の工具経路生成に関する研究2019
- Author(s)
  櫛野仁司, 熊野谿真帆, 中本圭一
- Organizer
  2019年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-18K18804
[Presentation] Automated Workpiece Setting Operation and Its Errors Compensation on an Ultraprecision Machine Tool2019
- Author(s)
  M. Xu, R. Kitakawa, K. Nakamoto, Y. Takeuchi
- Organizer
  19th International Conference of the European Society for Precision Engineering and Nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16KK0144
[Presentation] 加工途中の工作物の剛性を確保するための工具経路生成に関する研究2019
- Author(s)
  櫛野仁司, 熊野谿真帆, 中本圭一
- Organizer
  日本機械学会第13回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-18K18804
[Presentation] A Study on Tool Setting Errors Compensation by Means of Non-contact Measurement on an Ultraprecision Machine Tool2018
- Author(s)
  M. Xu, R. Kitakawa, K. Nakamoto, Y. Takeuchi
- Organizer
  17th International Conference on Precision Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01347
[Presentation] Three-dimensional Micro Shape Creation on a Workpiece Located by Industrial Robot2018
- Author(s)
  R. Kitakawa, K. Nakamoto, Y. Takeuchi
- Organizer
  International Symposium on Precision Engineering and Sustainable Manufacturing 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01347
[Presentation] Proposal of a Determination Method of Cutting Sequence Based on Optimal Workpiece Shapes During a Machining Operation2018
- Author(s)
  H. Kushino, M Kumanotani, K. Nakamoto
- Organizer
  17th International Conference on Precision Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K18804
[Presentation] 工作物のトポロジー最適化に基づいた荒加工工程の加工順序決定手法に関する研究2018
- Author(s)
  櫛野仁司, 熊野谿真帆, 中本圭一
- Organizer
  日本機械学会第12回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-18K18804
[Presentation] マイクロ複雑形状の多軸機上計測のためのプローブ経路生成に関する研究2017
- Author(s)
  田村拓哉, 中本圭一, 竹内芳美
- Organizer
  2017年度精密工学会春季大会学術講演会
- Place of Presentation
  慶應義塾大学（横浜市港北区）
- Year and Date
  2017-03-13
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Automatic Compensation of Workpiece Setting Errors in Ultraprecision Machining2017
- Author(s)
  R. Kitakawa, K. Nakamoto, Y. Takeuchi
- Organizer
  7th International Conference of Asian Society for Precision Engineering and Nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] Setting Errors Compensation of a Workpiece Located by Industrial Robots2017
- Author(s)
  K. Nakamoto, R. Kitakawa, Y. Takeuchi
- Organizer
  17th International Conference of the European Society for Precision Engineering and Nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Machining Error Estimation of Micro Complicated Shapes by On-machine Scanning Measurement2017
- Author(s)
  T. Kon, K. Nakamoto, Y. Takeuchi
- Organizer
  9th International Conference on Leading Edge Manufacturing in 21st Century
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] Automatic Tool Setting Errors Compensation in Ultraprecision Machining2016
- Author(s)
  K. Nakamoto, S. Baba, Y. Takeuchi
- Organizer
  16th International Conference of the European Society for Precision Engineering and Nanotechnology
- Place of Presentation
  Nottingham, UK
- Year and Date
  2016-05-30
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] 超精密切削加工における機上計測のためのセッティング誤差の影響解析に関する研究2016
- Author(s)
  近　泰良, 田村拓哉, 中本圭一, 竹内芳美
- Organizer
  日本機械学会第11回生産加工・工作機械部門講演会
- Place of Presentation
  名古屋大学（名古屋市千種区）
- Year and Date
  2016-10-22
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] 超精密機上計測を用いたセッティング誤差補正手法の開発2016
- Author(s)
  馬場慎之佑, 中本圭一, 竹内芳美
- Organizer
  日本機械学会生産システム部門研究発表講演会2016
- Place of Presentation
  東京理科大学（千葉県野田市）
- Year and Date
  2016-03-14
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Probe Path Generation for 5-axis Control On-machine Measurement2016
- Author(s)
  T. Tamura, K. Nakamoto, Y. Takeuchi
- Organizer
  16th International Conference on Precision Engineering
- Place of Presentation
  アクトシティ浜松（浜松市中区）
- Year and Date
  2016-11-14
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] マイクロ複雑形状の超精密機上計測におけるプローブ姿勢の決定に関する研究2015
- Author(s)
  田村拓哉, 馬場慎之佑, 中本圭一, 竹内芳美
- Organizer
  2015年度精密工学会秋季大会学術講演会
- Place of Presentation
  東北大学（仙台市青葉区）
- Year and Date
  2015-09-04
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Tool Setting Errors Compensation by Using an On-machine Measurement Device2015
- Author(s)
  S. Baba, K. Nakamoto, Y. Takeuchi
- Organizer
  19th International Conference on Mechatronics Technology
- Place of Presentation
  東京工業大学（東京都目黒区）
- Year and Date
  2015-11-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Decision of Probe Attitude for On-machine Measurement2015
- Author(s)
  T. Tamura, K. Nakamoto, Y. Takeuchi
- Organizer
  6th International Conference of Asian Society for Precision Engineering and Nanotechnology
- Place of Presentation
  Harbin, China
- Year and Date
  2015-08-15
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] Development of CAPP System for Multi-tasking Machining of Complex Shapes2013
- Author(s)
  K. Nakamoto, D. Hamada, Y. Takeuchi
- Organizer
  Proc. of 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  Matsushima
- Year and Date
  2013-11-08
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Development of CAPP System for Multi-tasking Machining of Complex Shapes2013
- Author(s)
  K. Nakamoto, D. Hamada, Y. Takeuchi
- Organizer
  JSME
- Place of Presentation
  Hotel Matsushima Daikanso, Miyagi
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] 5-Axis Control Ultraprecision Dexterous Micromachining of Möbius Ring2013
- Author(s)
  K. Nakamoto, R. Nishiyama, T. Ishida, Y. Takeuchi
- Organizer
  Proc. of 13th EUSPEN Int. Conf
- Place of Presentation
  Berlin, Germany
- Year and Date
  2013-05-29
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] 5-Axis Control Ultraprecision Dexterous Micromachining of Möbius Ring2013
- Author(s)
  K. Nakamoto, R. Nishiyama, T. Ishida, Y. Takeuchi
- Organizer
  EUSPEN
- Place of Presentation
  Berlin, Germany
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Ultraprecision Cutting of SiC by Rotational Diamond Tool with Special Chamfer2013
- Author(s)
  Toan Vu Van, K. Nakamoto, Xinrui Tang
- Organizer
  ASPEN
- Place of Presentation
  Taipei, Taiwan
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Development of 5-axis Control CAM System for Multi-tasking Machine Tools2012
- Author(s)
  Keiichi Nakamoto
- Organizer
  Proc. of 45st CIRP Conf. on Manufacturing Systems (CIRP-CMS2012)
- Place of Presentation
  Athens, Greece
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] 柔軟工作物の巧妙加工に関する研究2012
- Author(s)
  中本圭一
- Organizer
  日本機械学会第9回生産加工・工作機械部門講演会
- Place of Presentation
  秋田県立大学
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Development of 5-axis Control CAM System for Multi-tasking Machine Tools2012
- Author(s)
  K. Nakamoto, K. Kubota, T. Ishida, Y. Takeuchi
- Organizer
  Proc. of 45st CIRP Conf. on Manufacturing Systems (CIRPCMS2012)
- Place of Presentation
  Athens, Greece
- Year and Date
  2012-05-17
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Efficient Tool Path Generation for Five-Axis Controlled Machining by Use of Square End Mill2011
- Author(s)
  N.Natsume, K.Nakamoto, Y.Takeuchi
- Organizer
  Proc.of 6th Int.Conf.on Leading Edge Manufacturing in 21st Century (LEM21), JSME
- Place of Presentation
  Saitama, Sonic city
- Year and Date
  2011-11-08
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Dexterous Machining of Chain-Shapes by Employing a Multi-Tasking Machine Tool2011
- Author(s)
  K. Nakamoto, T. Fujimoto, Y. Kawaguchi, T. Ishida, Y. Takeuchi
- Organizer
  Proc. of 15th Int. Conf. on Mechatronics Technology (ICMT2011)
- Place of Presentation
  Melbourne, Australia
- Year and Date
  2011-12-01
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Dexterous Machining of Chain-Shapes by Employing a Multi-Tasking Machine Tool2011
- Author(s)
  K.Nakamoto, T.Fujimoto, Y.Kawaguchi, T.Ishida, Y.Takeuchi
- Organizer
  Proc.of 15th Int.Conf.on Mechatronics Technology (ICMT2011)
- Place of Presentation
  Melbourne, Australia
- Year and Date
  2011-11-30
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining -Formulation of Post Processor-2009
- Author(s)
  Eiki ISHIGURO, Tohru ISHIDA, Masahiko KITA, Keiichi NAKAMOTO, Yoshimi TAKEUCHI
- Organizer
  Proc. of 5th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), Manufacturing and Machine Tool Division & Manufacturing System Division, Japan Society of Mechanical Engineers (JSME)
- Place of Presentation
  Osaka, Japan
- Year and Date
  2009-12-03
- Data Source
  KAKENHI-PROJECT-20760085
[Presentation] Basic Performance Analysis of Cooling Pipe with a Changing Cross Section2009
- Author(s)
  Seiji NAGASAWA, Tohru ISHIDA, Masahiko KITA, Keiichi NAKAMOTO, Yoshimi TAKEUCHI
- Organizer
  Proc. of 5th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), Manufacturing and Machine Tool Division & Manufacturing System Division, Japan Society of Mechanical Engineers (JSME)
- Place of Presentation
  Osaka, Japan
- Year and Date
  2009-12-02
- Data Source
  KAKENHI-PROJECT-20760085
[Presentation] パラレルメカニズム形工作機械のための工程設計支援技術に関する研究-様々な工具の位置姿勢における振動特性-2008
- Author(s)
  中本圭一, 大竹香太, 森脇俊道, 白瀬敬一
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  明治大学
- Year and Date
  2008-03-18
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] 5軸制御工作機械のための工程設計支援システムの開発に関する研究-3+2軸制御加工における工具姿勢の高速な決定方法-2008
- Author(s)
  角田充, 中本圭一, 白瀬敬一
- Organizer
  2008年度精密工学会秋季大会学術講演会
- Place of Presentation
  東北大学
- Year and Date
  2008-09-19
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] Development of a Support System of Operation Planning for Parallel Kinematic Machine Tool2008
- Author(s)
  K. NAKAMOTO, K. OTAKE, K. SHIRASE, T. MORIWAKI
- Organizer
  The 7th International Conference on Machine Automation (ICMA2008)
- Place of Presentation
  Awaji
- Year and Date
  2008-09-26
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] Development of a Support System of Operation Planning for Parallel Kinematic Machine Tool2008
- Author(s)
  中本圭一
- Organizer
  The 7th International Conference on Machine Automation
- Place of Presentation
  淡路夢舞台国際会議場
- Year and Date
  2008-09-26
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] A Study on Rapid Search Method of Effective Tool Postures in 3+2-Axis Control Milling2008
- Author(s)
  中本圭一
- Organizer
  2008 International Symposium on Flexible Automation
- Place of Presentation
  ジョージア工科大
- Year and Date
  2008-06-24
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] A Study on Rapid Search Method of Effective Tool Postures in 3+2-Axis Control Milling2008
- Author(s)
  K. NAKAMOTO, M. TSUNODA, K. SHIRASE, T. MORIWAKI
- Organizer
  2008 International Symposium on Flexible Automation (ISFA2008)
- Place of Presentation
  Atlanta
- Year and Date
  2008-06-24
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] Rapid Removal Volume Evaluation for Tool Posture Decision in 3+2 axis Control milling2007
- Author(s)
  K. Nakamoto, M. Tsunoda, T. Inaoka, K. Shirase, T. Moriwaki
- Organizer
  The 4th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Fukuoka, Japan
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Presentation] Milling Process Control by Digital Copy Milling System Integrated Voxel Model Simulator(in Japanese)2007
- Author(s)
  T. Funatsu, T. Sakaguchi, K. Nakamoto, K. Shirase
- Organizer
  2007 Annual Meeting of the Japan Society for Precision Engineering
- Place of Presentation
  Asahikawa/Japan
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Presentation] ボクセルモデルを取り入れたNC工作機械の自律制御に関する研究2007
- Author(s)
  船津竹史, 阪口龍彦, 中本圭一, 白瀬敬一
- Organizer
  2007年度精密工学会秋季大会学術講演会
- Place of Presentation
  旭川市ときわ市民ホール,旭川
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Presentation] Rapid Removal Volume Evaluation for Tool Posture Decision in 3+2-Axis Control Millins2007
- Author(s)
  中本圭一
- Organizer
  The 4th International Conference onLeading Edge Mannfactuiring in 21st Century
- Place of Presentation
  福岡国際会議場
- Year and Date
  2007-11-08
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] パラレルメカニズム形工作機械のための工程設計支援技術に関する研究-サーボモータ負荷と振動特性の評価-2007
- Author(s)
  大竹香太, 中本圭一, 森脇俊道
- Organizer
  2007年度精密工学会秋季大会学術講演会
- Place of Presentation
  旭川市ときわ市民ホール
- Year and Date
  2007-09-13
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] Rapid Removal Volume Evaluation for Tool Posture Decision in 3+2-Axis Control Milling2007
- Author(s)
  K. NAKAMOTO, M. TSUNODA, T. INAOKA, K. SHIRASE, T. MORIWAKI
- Organizer
  The 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  Fukuoka
- Year and Date
  2007-11-08
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] 加工プロセスシミュレーションのためのボクセルモデルの研究2006
- Author(s)
  河野智之, 小山智, 阪口龍彦, 中本圭一, 白瀬敬一
- Organizer
  日本機械学会第6回生産加工・工作機械部門講演会
- Place of Presentation
  生産性国際交流センター,葉山
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Presentation] Machining Shape Simulation Based on Voxel Model(in Japanese)2006
- Author(s)
  K. Shirase, T. Kouno, T, Sakaguchi, K. Nakamoto
- Organizer
  06 Kansai Branch Annual Meeting of the Japan Society for Precision Engineering
- Place of Presentation
  Wakayama/Japan
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Presentation] ボクセルモデルによる加工形状シミュレーション2006
- Author(s)
  白瀬敬一, 河野智之, 阪口龍彦, 中本圭一
- Organizer
  精密工学会2006年度関西地方定期学術講演会
- Place of Presentation
  和歌山大学,和歌山
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360063

1. Sasahara Hiroyuki (00205882)

# of Collaborated Projects: 8 results

# of Collaborated Products: 0 results
2. SUZUKI Hirofumi (20282098)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
3. TAKEUCHI Yoshimi (50107546)

# of Collaborated Projects: 3 results

# of Collaborated Products: 30 results
4. SHIBASAKA Toshirou (80094530)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. ISHIDA Tohru (20313421)

# of Collaborated Projects: 2 results

# of Collaborated Products: 13 results
6. IWAMOTO Kaoru (50408712)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. MORIWAKI Toshimichi (00031104)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
8. SHIRASE Keiichi (80171049)

# of Collaborated Projects: 1 results

# of Collaborated Products: 9 results
9. SAKAGUCHI Tatsuhiko (00403303)

# of Collaborated Projects: 1 results

# of Collaborated Products: 5 results
10. 阿部壮志 (60756469)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. YAO Yasuhiro

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. 幸田盛堂

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

NAKAMOTO KEIICHI 中本 圭一

NAKAMOTO Keiichi 中本 圭一

Research Projects

Research Products

Co-Researchers

機械加工のDX推進に向けて加工環境を反映した加工工程を計画するデジタル工程設計Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Systematization of Process Planning for Machining Operations Based on Topology Optimization of WorkpiecePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development an Ultraprecision Cutting System for Highly Efficient Machining of Die Having Free-form Surface with Micro TexturesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Complex 3D Shape Creation Based on Cutting Simulator and On-Machine Tool Shaping (Fostering Joint International Research)Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of an autonomous ultra-precision machine tool having functions of on-machine measurement and tool shapingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Dexterous machining of soft objects by employing an aqueous solution of sodium acetatePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of CAPP System for Multi-tasking Machining by using the physical model of machine toolsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of a Support System of Process Planning for Multi-Axis Controlled Machine ToolsPrincipal Investigator

Principal Investigator

Project Period (FY)

NAKAMOTO KEIICHI 中本圭一

NAKAMOTO Keiichi 中本圭一