MATERIALS TRANSACTIONS
Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Effect of Thermal Cycling on Multistage Martensitic Transformation in Aged Ti–50.8 at% Ni Alloy
Banafsheh Karbakhsh RavariMasatoshi MitsuharaSahar FarjamiMinoru Nishida
Author information
JOURNAL FREE ACCESS

2013 Volume 54 Issue 12 Pages 2185-2188

Details
Abstract

The effect of thermal cycling on multistage martensitic transformation (MMT) in aged Ti–50.8 at% Ni alloy was investigated. The specimens were solution-treated at 1273 K for 3.6 ks and then aged at 773 K for 3.6 ks in vacuum without atmosphere regulation. Upon cooling, the aged specimens clearly showed quadruple-stage transformation denoted as B2 → R → M1 → M2 → M3. The peak temperatures of exothermic reactions R*, M1*, and M2* (corresponding to the R-phase, M1 and M2 transformations, respectively) in the differential scanning calorimetry (DSC) cooling curve were rather stable up to 100 thermal cycles, since there were fine Ti3Ni4 precipitates with high distribution density in the intermediate and grain boundary regions. These precipitates prevented the formation of dislocations during thermal cycling. On the other hand, the peak temperature of exothermic reaction M3* (corresponding to the M3 transformation) drastically decreased with increasing the number of thermal cycles since there were large Ti3Ni4 precipitates with low distribution density. Many dislocations were observed in the central regions of grains after 100 thermal cycles.

Content from these authors
© 2013 The Japan Institute of Metals and Materials
Previous article Next article
feedback
Top