• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

TSUKADA Tadao  塚田 忠夫

ORCIDConnect your ORCID iD *help
Researcher Number 00016437
Other IDs
Affiliation (based on the past Project Information) *help 2002 – 2004: 明治大学, 理工学部, 教授
1995 – 1998: 東京工業大学, 大学院・情報理工学研究科, 教授
1987 – 1990: Professor, Tokyo Institute of Technology, 工学部, 教授
1986: 東京工大, 工学部, 教授
Review Section/Research Field
Principal Investigator
設計工学・機械要素・トライボロジー / 機械要素 / 機械工作 / 機械工作・生産工学
Except Principal Investigator
設計工学・機械要素・トライボロジー / 機械工作・生産工学
Keywords
Principal Investigator
計測 / Form / 超精密 / 三次元 / stylus tip / uncertainty / stratified function / plateau surface / 形状測定 / Three-dimensional measurement … More / Measurement / Spline function / 形状 / スプライン関数 / Pattern / LSI / Wide range / Precision measurement / ディジタルフィルタ / ダイナミックレンジ / 軸対称 / LSIパタ-ン / 形状評価 / ワイドレンジ / 三次元測定 / 精密計測 / Contour profile / Three-dimension / 輪郭形状 / bearing curve / surface texture / contact method / lubrication / spline filter / Gaussian filter / surface roughness / wavelength limitation / Fractal / contact measurement / lubricating properly / 蝕針式 / 負荷曲線 / 表面性状 / 触針式 / スタイラスチップ / 不確かさ / 潤滑特性 / 二層構造表面 / プラトー表面 / Microscope / Flatness / Surface roughness / Stitching / Interference measurement / Image measurement / Multi-scale / Form measurement / 顕微鏡 / 平面度 / 表面粗さ / スティッチング / 干渉計測 / 画像計測 / マルチスケール / Vector Representation / Axial Motion / Conical Motion / Radial Motion / Total Evaluation / Static Bearing / Systematic Error / Rotating Accuracy / ベクトル表示 / アキシャルモーション / コニカルモーション / ラジアルモーション / 総合評価 / 静圧軸受 / 固有誤差 / 回転精度 / From / Free-surface / 三次元測定機 / 自由曲面 … More
Except Principal Investigator
平面度 / 三次元測定 / 表面粗さ / 離散データ / 探索手法 / 厳密解 / 真球度 / 真円度 / 形状偏差 / 形状精度 / Microscope / Summit / Surface roughness / Stitching / Interference measurement / Image measurement / Multi-scale / Form measurement / 顕微鏡 / 頂点 / スティッチング / 干渉計測 / 画像計測 / マルチスケール / 形状測定 / Roller Bearing / Development of Equipment / Static Bearing / Three-Dimensional Measurement / Roughness / Waviness / Form Error / Cylinder / ころ軸受 / 装置開発 / 静圧軸受 / 粗さ / うねり / 形状誤差 / 円筒 / 評価パラメータ / 表面テクスチャ / 国際標準化機構 / 精密 / 球極座標系 / 計測 / 測定 / 形状 / 非球面 / 球面 Less
  • Research Projects

    (12 results)
  • Research Products

    (3 results)
  • Co-Researchers

    (6 People)
  •  Assessment of stratified functional properties for plateau surfacesPrincipal Investigator

    • Principal Investigator
      TSUKADA Tadao
    • Project Period (FY)
      2002 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      MEIJI UNIVERSITY
  •  表面テクスチャの三次元測定規範と形状評価パラメータの国際標準化支援研究

    • Principal Investigator
      柳 和久
    • Project Period (FY)
      1998
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      Nagaoka University of Technology
  •  A Basic Research about a Multi-Scale Evaluation of Surface Form Measurement

    • Principal Investigator
      SASAJIMA Kazuyuki
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      Tokyo Institute of Technology
  •  A Multi-Scale Measurement Method and Its Data Compression of from Surface Profiles to Form ErrorsPrincipal Investigator

    • Principal Investigator
      TSUKADA Tadao
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      TOKYO INSTITUTE OF TECHNOLOGY
  •  幾何学的特徴に基づく幾何形状誤差の厳密解法

    • Principal Investigator
      笹島 和幸
    • Project Period (FY)
      1996
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      Tokyo Institute of Technology
  •  球面データム創成法による非球面形状の計測・評価システムの開発

    • Principal Investigator
      TAKAHASHI Masaaki
    • Project Period (FY)
      1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo Institute of Technology
  •  幾何学的特徴に基づく離散データの幾何形状誤差の厳密解法

    • Principal Investigator
      笹島 和幸
    • Project Period (FY)
      1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo Institute of Technology
  •  An Absolute Evaluation of Systematic Error of High-Precision SpindlePrincipal Investigator

    • Principal Investigator
      TSUKADA Tadao
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      Tokyo Institute of Technology
  •  Development of an Evaluation System for Three-Dimensional Surface Asperity on Precision Cylindrical Parts

    • Principal Investigator
      SASAJIMA Kazuyuki
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      Tokyo Institute of Technology
  •  Form Assessment by a Compressing Information Technique of Free-Surface DataPrincipal Investigator

    • Principal Investigator
      TSUKADA Tadao
    • Project Period (FY)
      1989 – 1990
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械要素
    • Research Institution
      Tokyo Institute of Technology
  •  Development of Three-Dimensional Measuring System for Wide-Range and High-ResolutionPrincipal Investigator

    • Principal Investigator
      TSUKADA Tadao
    • Project Period (FY)
      1988 – 1990
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B).
    • Research Field
      機械要素
    • Research Institution
      Tokyo Institute of Technology
  •  The Basic Research of Three-dimensional Measurements and Assessment of High-precision Contour ProfilePrincipal Investigator

    • Principal Investigator
      TSUKADA Tadao
    • Project Period (FY)
      1986 – 1987
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械工作
    • Research Institution
      Tokyo Institute of Technology

All 2004

All Journal Article

  • [Journal Article] 表面粗さ測定における不確かさに及ぼす触針先端半径の影響(第1報)2004

    • Author(s)
      吉田一朗, 塚田忠夫
    • Journal Title

      日本設計工学会誌 39

      Pages: 450-455

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-14350084
  • [Journal Article] 表面粗さ測定における不確かさに及ぼす蝕針先端半径の影響(第2報)2004

    • Author(s)
      吉田一朗, 塚田忠夫
    • Journal Title

      日本設計工学会誌 40

      Pages: 91-96

    • Data Source
      KAKENHI-PROJECT-14350084
  • [Journal Article] 表面粗さ測定における不確かさに及ぼす蝕針先端半径の影響(第1報)2004

    • Author(s)
      吉田一朗, 塚田忠夫
    • Journal Title

      日本設計工学会誌 39

      Pages: 450-455

    • Data Source
      KAKENHI-PROJECT-14350084
  • 1.  SASAJIMA Kazuyuki (80170702)
    # of Collaborated Projects: 10 results
    # of Collaborated Products: 0 results
  • 2.  TAKAHASHI Masaaki (00179524)
    # of Collaborated Projects: 7 results
    # of Collaborated Products: 0 results
  • 3.  柳 和久 (80108216)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 4.  原 精一郎 (40293253)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 5.  明田川 正人 (10231854)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 6.  高田 孝次 (80126474)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi