Iguchi Manabu 井口学

… Alternative Names

Researcher Number	00043993
Affiliation (Current)	2018 : 大阪市立大学, 大学院工学研究科, 客員教授
Affiliation (based on the past Project Information) *help	2013 : 大阪電気通信大学, 工学部, 教授 2012 : 北海道大学, 工学(系)研究科(研究院), 特任教授 2011 : 北海道大学, 大学院・工学研究院, 特任教授 2007 : Hokkaido University, 大学院・工学研究科, 教授 2006 : 北海道大学, 大学院工学研究科, 教授 … More
Review Section/Research Field	Principal Investigator Metal making engineering / Fluid engineering / 金属精錬・金属化学 / Metal making engineering / Science and Engineering Except Principal Investigator Metal making engineering / 金属精錬・金属化学
Keywords	Principal Investigator 溶融金属 / 再層流化 / 鉄鋼製錬 / 濡れ性 / 流速計 / Relaminarization / Unsteady Flow / 乱流スラグ / 気泡 / バースト周波数 … More Except Principal Investigator bubble curtain / 速度計測 / 気泡付着法 / 2値化相関法 / 微細気泡 / Velocity Measurement / Deformation stress / 水モデル / Slab mold / 速度分布 / Water model / 浸漬ノズル / Centrifugal force / 3次元速度計測 / 三次元速度分布 / ガス吹き込み / 撹拌流れ / 撹拌 / Binary Image Correlation Method / Immersion nozzle / 介在物 / Mold Flux / Meniscus flow / 気泡撹拌 / PTV / 微細気泡の生成 / Injection Metallurgy / 流れの可視化 / 画像計測 / Inclusion / Raman spectroscopy / メニスカス流 / Mixing flow / ガラス相 / Swirling flow / 気泡噴流 / 底吹き気泡攪拌 / 攪拌流れ / 漬浸ノズル / 2値画像相関法 / モールドフラックス / Fine bubble / 粘弾性体 / 旋回による微細気泡の生成 / 気泡攪拌 / 変形応力 / 画像解析 / 三次元PTV / 3次元PTV / スラブモールド / 介在物除去 / Three-dimensional PTV / Three-dimensional PIV / Glass phase / 遠心力 / Rheological body / Raman分光 / 反応界面積 / インジェクション冶金 / 気泡幕 / Image processing / 3次元PIV / 旋回流 Less

Enhancement of refining efficiency due to fluid flow control of slag, metal and gasPrincipal Investigator
- Principal Investigator
  
  IGUCHI Manabu
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Metal making engineering
- Research Institution
  Osaka Electro-Communication University
  Hokkaido University
光触媒効果を利用した気液分離装置の開発Principal Investigator
- Principal Investigator
  
  井口学
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Metal making engineering
- Research Institution
  Hokkaido University
Measurements of the deformation stress of molten mold fluxes
- Principal Investigator
  
  SASAKI Yasushi
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Metal making engineering
- Research Institution
  HOKKAIDO UNIVERSITY
動的画像解析法による流動粒子数測定法の開発Principal Investigator
- Principal Investigator
  
  井口学
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Metal making engineering
- Research Institution
  Hokkaido University
DEVELOPMENT OF VELOCIMETRYPrincipal Investigator
- Principal Investigator
  
  IGUCHI Manabu
- Project Period (FY)
  1998 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas (B)
- Review Section
  
  Science and Engineering
- Research Institution
  HOKKAIDO UNIVERSITY
Removal of inclusion through fine bubble and bubble-curtain by imparting swirling flow in immersion nozzle
- Principal Investigator
  
  YOKOYA Shinichiro
- Project Period (FY)
  1998 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Metal making engineering
- Research Institution
  Nippon Institute of Technology
Development of a New Velocimetry for Fluid Flow of High Temperature Molten MetalPrincipal Investigator
- Principal Investigator
  
  IGUCHI Manabu
- Project Period (FY)
  1990 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属精錬・金属化学
- Research Institution
  Osaka University
THREE-DIMENSIONAL PTV MEASUREMENT OF MIXING FLOW BY BUBBLING JET IN A CYLINDRICAL VESSEL
- Principal Investigator
  
  UEMURA Tomomasa
- Project Period (FY)
  1990 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属精錬・金属化学
- Research Institution
  OSAKA UNIVERSITY
Experimental Study of Turbulence Structure in Pulsatile Pipe FlowPrincipal Investigator
- Principal Investigator
  
  IGUCHI Manabu
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  Osaka University
Experimental Study of Turbulent Slugs in Pulsatile Pipe FlowPrincipal Investigator
- Principal Investigator
  
  IGUCHI Manabu
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  Osaka University

All 2014 2013 2012 2011 2007 2006

All Journal Article Presentation

[Journal Article] In-situ formation of Ti-Al Alloy Thin Tubes in Iron Bodies2013
- Author(s)
  Yutaro SHITARA, Tatsuya OHMI and Manabu IGUCHI
- Journal Title
  
  J. JSEM
  
  Volume : 13-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] 急縮小部を有する微小流路内気液二相流の気泡速度に及ぼす流路高さの影響2013
- Author(s)
  深澤慧, 熊谷剛彦, 大参達也, 岩井和彦, 井口学
- Journal Title
  
  混相流
  
  Volume : 27-2 Pages : 168-174
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Formation Behaviors of Microchannels in Ni-Al Alloys by Sacrificial Core Method2013
- Author(s)
  Yuya Teshirogi, Tatsuya Ohmi, Takehiko Kumagai, and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 13-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] 急縮小部を有する微小流路内気液二相流の気泡速度に及ぼす流路高さの影響2013
- Author(s)
  深澤慧、熊谷剛彦、大参達也、岩井和彦、井口学
- Journal Title
  
  混相流
  
  Volume : 27-2 Pages : 168-1
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Dynamic Behavior of Low-Density Spheres Vertically Penetrating into a Water Bath2013
- Author(s)
  Yusuke Sakai and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 13-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Steady approach of unsteady low-Reynolds number flow past two rotating circular cylinders2013
- Author(s)
  Yoshiaki Ueda, Teruhiko Kida, and Manabu Iguchi
- Journal Title
  
  Journal of Fluid Mechanics
  
  Volume : 736 Pages : 414-443
- DOI
  10.1017/jfm.2013.503
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Cold model study of spout eye area with the slag layer simulated by low density particles2012
- Author(s)
  Asuka Maruyama and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 12-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Fabrication of free-form pipes containing microchannels from metal-powder raw materials2012
- Author(s)
  Yutarou Shitara, Tatsuya Ohmi, and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 12-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Characteristics of poorly-wetted two spheres penetrating into a water bath2012
- Author(s)
  Yusuke Sakai and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 12-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Water model experiment on the entrapment of slag using polymerization2012
- Author(s)
  Manabu Iguchi, Yutaka Sumida, Koji Mori, Tatsuya Ohmi, Yoshiaki Ueda and Keiji Nakajima
- Journal Title
  
  J. JSEM
  
  Volume : 12-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] 撥水性傾斜平板に沿って降下する液滴の移動挙動に及ぼす液滴物性値の影響2012
- Author(s)
  酒井祐介, 井口学
- Journal Title
  
  鉄と鋼
  
  Volume : 98-8 Pages : 389-396
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Micro droplets generated on a rising bubble through an oppositely charged oil/water interface2012
- Author(s)
  Tomomasa Uemura, Yoshiaki Ueda, and Manabu Iguchi
- Journal Title
  
  Journal of Visualization
  
  Volume : 15-2 Pages : 119-124
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] 一対の固体球が水浴内に同時に浸入するときの動的挙動2012
- Author(s)
  酒井祐介, 井口学
- Journal Title
  
  鉄と鋼
  
  Volume : 98-1 Pages : 1-7
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Mixing time of a cylindrical bath agitated by gas injection through an off-centered L-shaped top lance2012
- Author(s)
  Norifumi Kochi and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 12-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Comparison of mixing time values between gas injections from centered and off-centered L-shaped top lances in the presence of swirl motion2012
- Author(s)
  Norifumi Kochi, Koji Mori, and Manabu Iguchi
- Journal Title
  
  ISIJ International
  
  Volume : 52-10 Pages : 1921-1923
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] 一対の固体球が水浴内に同時に侵入するときの動的挙動2012
- Author(s)
  酒井祐介, 井口学
- Journal Title
  
  鉄と鋼
  
  Volume : 98 Pages : 40-917
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Water entry of stripe coated hydrophobic circular cylinders Journal of Visualization2012
- Author(s)
  Yoshiaki Ueda and Manabu Iguchi
- Journal Title
  
  Short Paper
  
  Volume : 15-1 Pages : 33-35
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Numerical Simulation of Gas-Liquid Two-Phase Flow in a Horizontally Placed Hydrophobic Rectangular Channel (Part 2, Influence of Abrupt Contraction)2012
- Author(s)
  Yoshiaki Ueda, Tomoya Nakajima, Toshio Ishii, Ryoji Tsujino, and Manabu Iguchi
- Journal Title
  
  International Journal of High Temperature Materials and Processes
  
  Volume : 31(4-5) Pages : 411-413
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Water model experiment on the entrapment of slag using polymerization2012
- Author(s)
  Manabu Iguchi
- Journal Title
  
  J. JESEM
  
  Volume : 12-Special Issue Pages : 40-45
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Integral representation of low-Reynolds-number Hydrodynamics (Study of Stokes' paradox)2012
- Author(s)
  Yoshiaki Ueda and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 12-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Rupture of cavity film due to water entry of horizontal superhydrophobic circular cylinders2012
- Author(s)
  Yoshiaki Ueda and Manabu Iguchi
- Journal Title
  
  International Journal of High Temperature Materials and Processes
  
  Volume : 31
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Flow past a square prism with cut corners (Effect of angle of attack)2012
- Author(s)
  Yoshiaki Ueda, Mitsuo Kurata, Teruhiko Kida and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 12-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Numerical Simulation of Gas-Liquid Two-Phase Flow in a Horizontally Placed Hydrophobic Rectangular Channel (Part 1, Influence of Abrupt Expansion)2012
- Author(s)
  Yoshiaki Ueda, Tomoya Nakajima, Toshio Ishii, Ryoji Tsujino, and Manabu Iguchi
- Journal Title
  
  International Journal of High Temperature Materials and Processes
  
  Volume : 31(4-5) Pages : 405-410
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] 底吹き円筒容器内におけるスラグを模した低密度粒子層に形成されるスポウトアイ2011
- Author(s)
  丸山明日香, 井口学
- Journal Title
  
  鉄と鋼
  
  Volume : 97-10 Pages : 519-524
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Behavior of a droplet impacting on a flat plate2011
- Author(s)
  Yusuke Sakai, Yoshiaki Ueda, Toshio Ishii, and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 11-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Estimation of slip velocity on a hydrophobic wall2011
- Author(s)
  Manabu Iguchi and Yoshiaki Ueda
- Journal Title
  
  International Journal of High Temperature Materials and Processes
  
  Volume : 30-4/5 Pages : 311-315
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Fabrication of Ni-Al alloy transpiration cooling device by powder-metallurgical microchanneling process2011
- Author(s)
  Masutaka Omura, Tatsuya Ohmi, Takehiko Kumagai, and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 11-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Numerical Observation of Flow Field around the Water Column behind a Rising Bubble Through an Oil/Water Interface2011
- Author(s)
  Y.Ueda, N.Kochi, T.Uemura, T.Ishii, M.Iguchi
- Journal Title
  
  ISIJ International
  
  Volume : 51 Pages : 1940-1942
- DOI
  10.2355/isijinternational.51.1940
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Numerical simulation on penetration stage of a rising bubble through an oil/water interfac2011
- Author(s)
  Norifumi Kochi, Yoshiaki Ueda, Tomomasa Uemura, Toshi Ishii, and Manabu Iguchi
- Journal Title
  
  ISIJ Int
  
  Volume : 51-6 Pages : 1011-1013
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] 気泡流内のレイノルズ応力と乱流熱流束-単孔ノズルの実験的評価-2011
- Author(s)
  藤林晃夫, 井口学, 石井俊夫
- Journal Title
  
  実験力学
  
  Volume : 11-3 Pages : 96-102
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Numerical observation of flow field around the water column behind a rising bubble through an oil/water interface2011
- Author(s)
  Yoshiaki Ueda, Norifumi Kochi, Tomomasa Uemura, Toshio Ishii, and Manabu Iguchi
- Journal Title
  
  ISIJ Int
  
  Volume : 51-11 Pages : 1940-1942
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Fabrication of microchannels in metallic wire bundles by a sacrificial-core method2011
- Author(s)
  Tatsuya Ohmi, Masayuki Sakairi, and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 11-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] 底吹き門筒容器内におけるスラグを模した低密度粒子層に形成されるスボウトアイ2011
- Author(s)
  丸山明日香・井口学
- Journal Title
  
  鉄と鋼
  
  Volume : 97 Pages : 519-524
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] 4つのタイプの空気吹き込みノズルを用いた場合の気泡噴流の熱輸送・混合の実験的評価2011
- Author(s)
  藤林晃夫, 井口学, 石井俊夫
- Journal Title
  
  実験力学
  
  Volume : 11-4 Pages : 371-376
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Mixing time in a cylindrical bath agitated by gas injection through a multi-hole nozzle2011
- Author(s)
  Hirofumi Ooyabu, Ryoji Tsujino, Olsegun J Ilegbusi, and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 11-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Gas-liquid two-phase flow through an orifice in millimeter-scale rectangular channel2011
- Author(s)
  Takashi Oke, Takehiko Kumagai, Olsegun J. Ilegbusi, and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 11-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Fabrication of oxide coating on Ni-Al microchannel wall for catalyst supporting2011
- Author(s)
  Yutaro Nagase, Tatsuya Ohmi, Akira Yamauchi, and Manabu Iguchi
- Journal Title
  
  J. JSEM
  
  Volume : 11-Special Issue
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Swirl motion in a cylindrical bath caused by top lance gas injection2011
- Author(s)
  Jinlong Wang, Hirofumi Ooyabu, Fuming Jinlong, and Manabu Iguchi
- Journal Title
  
  ISIJ International
  
  Volume : 51-7 Pages : 1080-1085
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Relationship between mixing time and the number of holes of a top blowing immersion nozzle in a cylindrical bath2011
- Author(s)
  Hirofumi Ooyabu, Koji Mori, and Manabu Iguchi
- Journal Title
  
  ISIJ International
  
  Volume : 51-9 Pages : 1561-1563
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360330
[Journal Article] Bubble formation frequency at a single-hole nozzle immersed in a mercury bath2007
- Author(s)
  Manabu Iguchi, Tomoyuki Chihara, Ryoji Tsujino, Yasushi Sasaki, Kazuyoshi Nisjihara, and Goichi Matui
- Journal Title
  
  Proc. Int. Symp. Advanced Fluid/Solid Sci. Tech. in Experimental Mechanics, ISEM-2Osaka, Suita, Osaka, Sep. 23-25(2007) (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18656220
[Journal Article] Effect of channel attitude on flow pattern of air-water two-phase flow in rectangular mili-scale channels2007
- Author(s)
  Takkehiko Kumagai and Manabu Iguchi
- Journal Title
  
  Proc. Int. Symp. Advanced Fluid/Solid Sci. Tech. in Experimental Mechanics, ISEM-2Osaka, Suita, Osaka, Sep. 23-25(2007) (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18656220
[Journal Article] 扁平矩形流路における気液二相流の流動様式におよぼす壁面撥水性の影響2007
- Author(s)
  熊谷剛彦, 井口学
- Journal Title
  
  実験力学 7巻1号
  
  Pages : 50-55
- Data Source
  KAKENHI-PROJECT-18656220
[Journal Article] Solid-liquid separation in wastewater by air bubble-Bubble formation frequency at poorly wetted nozzle2007
- Author(s)
  Akira Hiratsuka, Ryoji Tsujino, Yasushi Sasaki, Masato Sato, Kazuo Ohmi, and Manabu Iguchi
- Journal Title
  
  J. JSEM 7
  
  Pages : 76-82
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18656220
[Journal Article] Effect of Channel Gap on Flow Pattern of Air-water Two-phase Flow in Horizontally Placed Rectangular Milli-scale Channels2007
- Author(s)
  Takkehiko Kumagai and Manabu Iguchi
- Journal Title
  
  Proc. Int. Symp. Advanced Fluid/Solid Sci. Tech. in Experimental Mechanics, ISEM-2Osaka, Suita, Osaka, Sep. 23-25(2007) (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18656220
[Journal Article] Prediction of argon gas attachment to sliding gate in immersion nozzle2006
- Author(s)
  Manabu Iguchi, Yasushi Sasaki
- Journal Title
  
  ISIJ International 46巻8号
  
  Pages : 1264-1266
- Data Source
  KAKENHI-PROJECT-18656220
[Journal Article] 傾斜円管内静止水中を上昇する大気泡に及ぼす濡れ性の影響2006
- Author(s)
  福士恵介, 井口学
- Journal Title
  
  実験力学 6巻4号
  
  Pages : 66-71
- Data Source
  KAKENHI-PROJECT-18656220
[Journal Article] 気液二相系におけるオリフィスへの環状気泡の付着と液流速2006
- Author(s)
  前田大介, 井口学
- Journal Title
  
  鉄と鋼 92巻9号
  
  Pages : 572-574
- Data Source
  KAKENHI-PROJECT-18656220
[Journal Article] スライディングゲートへの気泡付着と液流速2006
- Author(s)
  前田大介, 井口学
- Journal Title
  
  実験力学 6巻3号
  
  Pages : 98-104
- Data Source
  KAKENHI-PROJECT-18656220
[Journal Article] 気液二相系におけるオリフィスへの環状気泡の付着と損失係数2006
- Author(s)
  前田大介, 井口学
- Journal Title
  
  鉄と鋼 92巻9号
  
  Pages : 575-577
- Data Source
  KAKENHI-PROJECT-18656220
[Presentation] 水中に侵入する物体が形成するキャビティに関する研究2014
- Author(s)
  加藤健司,南亮輔,脇本辰郎,井口学
- Organizer
  日本鉄鋼協会第165回春季講演大会講演論文集
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] 流れ学(製鋼プロセスの攪拌を対象として) 「鉄鋼精錬プロセスにおける精錬反応の基礎と応用を学ぶ」2014
- Author(s)
  井口学
- Organizer
  セミナー
- Year and Date
  2014-01-15
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] キャピラリージェット法による液体金属の動的表面張力測定2014
- Author(s)
  脇本辰郎,前田光輝, 加藤健司,井口学
- Organizer
  日本鉄鋼協会第165回春季講演大会講演論文集
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] 水中に侵入する物体が形成するキャビティに関する研究2014
- Author(s)
  加藤健司，南亮輔，脇本辰郎，井口学
- Organizer
  日本鉄鋼協会第165回春季講演大会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] キャピラリージェット法による液体金属の動的表面張力測定2014
- Author(s)
  脇本辰郎，前田光輝, 加藤健司，井口学
- Organizer
  日本鉄鋼協会第165回春季講演大会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] 液中に侵入する粒子後方に形成されるキャビティの挙動に関する研究2013
- Author(s)
  加藤健司,南亮輔,脇本辰郎,井口学
- Organizer
  日本実験力学会講演論文集, 分科会合同ワ-クショップ 2013
- Place of Presentation
  淡路島
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Effect of heating rate on microchanneling behavior in Ni-Al reactivr-sintered specimens2012
- Author(s)
  Yuya Teshirogi, Tatsuya Ohmi, Takehiko Kumagai, and Manabu Iguchi
- Organizer
  Proc. 7th Int. Symposium on Advanced Science and Technology in Experimental Mechanics, ISEM-7
- Place of Presentation
  The Grand Hotel, Taipei, Taiwan
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Dynamic Behavior of Low-Density Spheres Vertically Penetrating into a Water Bath2012
- Author(s)
  Yusuke Sakai and Manabu Iguchi
- Organizer
  Proc. 7th Int. Symposium on Advanced Science and Technology in Experimental Mechanics, ISEM-7
- Place of Presentation
  The Grand Hotel, Taipei, Taiwan
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Numerical simulation of swirl motion caused by an upward periodic jet in a cylindrical container2012
- Author(s)
  Yoshiaki Ueda, Tomoya Nakajima, Tomomasa Uemura, Yasushi Sasaki, and Manabu Iguchi
- Organizer
  Proc. 7th Int. Symposium on Advanced Science and Technology in Experimental Mechanics, ISEM-7
- Place of Presentation
  Mechanics, ISEM-7
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Experimental investigation for flow around the turbine with cylindrical core (Effect of the mounting angle of blade)2012
- Author(s)
  Tomoya Nakajima, Yoshiaki Ueda, and Manabu Iguchi
- Organizer
  Proc. 7th Int. Symposium on Advanced Science and Technology in Experimental Mechanics, ISEM-7
- Place of Presentation
  The Grand Hotel, Taipei, Taiwan
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] 非定常ガス吹込みによる円筒容器内旋回現象の振幅の測定2012
- Author(s)
  酒井祐介,設楽守良,中嶋智也,植田芳昭,井口学
- Organizer
  日本実験力学会 2012 会年会講演会講演論文集
- Place of Presentation
  豊橋技術科学大学, 愛知県豊橋
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Alkali Leaching of Cu-Al Alloy Microchannel Lining Layer2012
- Author(s)
  Asuka Maruyama, Tatsuya Ohmi, Masatoshi Sakairi, and Manabu Iguchi
- Organizer
  Proc. 7th Int. Symposium on Advanced Science and Technology in Experimental Mechanics, ISEM-7
- Place of Presentation
  The Grand Hotel, Taipei, Taiwan
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] 水銀浴中に設置した単孔ノズルで生成した気泡の上昇挙動2011
- Author(s)
  井口学,千原知幸,森幸治,西原一嘉
- Organizer
  日本設計工学会 2011年度秋季講演講演論文集
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Characteristics of Poorly-Wetted Two Spheres Penetrating into a Water Bath2011
- Author(s)
  Yusuke SAKAI, Manabu IGUCHI
- Organizer
  Proc.6th International Symposium on Advanced Science and Technology in Experimental Mechanics
- Place of Presentation
  関西空港会議ホール(大阪)
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Cold model study of spout eye area with the slag layer simulated by low density particles2011
- Author(s)
  Asuka Maruyama and Manabu Iguchi
- Organizer
  Proc. 6 th Int. Symposium on Advanced Science and Technology in Experimental Mechanics, ISEM-6
- Place of Presentation
  International Conferece Center,Kansai Airport, Osaka
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Fabrication of free-form pipes metal-powder raw materials2011
- Author(s)
  Yutarou Shitara, Tatsuya Ohmi and Manabu Iguchi
- Organizer
  Proc. 6 th Int. Symposium on Advanced Science and Technology in Experimental Mechanics, ISEM-6
- Place of Presentation
  International Conferece Center, Kansai Airport, Osaka
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Characteristics of poorly wetted two spheres penetrating into a water bath2011
- Author(s)
  Yusuke Sakai and Manabu Iguchi
- Organizer
  Proc. 6 th Int. Symposium on Advanced Science and Technology in Experimental Mechanics, ISEM-6
- Place of Presentation
  International Conferece Center, Kansai Airport, Osaka
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Mixing time of a cylindrical bath agitated by gas injection through an off-centered L-shaped top lance2011
- Author(s)
  Norifumi Kochi and Manabu Iguchi
- Organizer
  Proc. 6 th Int. Symposium on Advanced Science and Technology in Experimental Mechanics, ISEM-6
- Place of Presentation
  International Conferece Center, Kansai Airport, Osaka
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Water model experiment on the entrapment of slag using polymerization2011
- Author(s)
  Manabu Iguchi, Yutaka Sumida, Koji Mori, Tatsuya Ohmi, Yoshiaki Ueda and Keiji Nakajima
- Organizer
  Proc. 6th Int. Symposium on Advanced Science and Technology in Experimental Mechanics, ISEM-6
- Place of Presentation
  International Conferece Center, Kansai Airport, Osaka
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] 斜めに水没する撥水性円柱によって形成されるキャビティ2011
- Author(s)
  植田芳昭,井口学
- Organizer
  混相流学会年会講演会2011(第12回)
- Place of Presentation
  京都
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Cold Model Study of Spout Eye Area in the Presence of the Slag Layer Simulated by Low-Density Particles2011
- Author(s)
  Asuka MARUYAMA, Manabu IGUCHI
- Organizer
  Proc.6th International Symposium on Advanced Science and Technology in Experimental Mechanics
- Place of Presentation
  関西空港会議ホール(大阪)
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] Mixing Time of a Cylindrical Bath Agitated by Gas Injection through an Off-centered L-shaped Top Lance2011
- Author(s)
  N.Kochi, M.Iguchi
- Organizer
  Proc.6th International Symposium on Advanced Science and Technology in Experimental Mechanics
- Place of Presentation
  関西空港会議ホール(大阪)
- Data Source
  KAKENHI-PROJECT-23360330
[Presentation] 各種攪拌法の特徴と効率改善2011
- Author(s)
  井口学, 植田芳昭,西原一嘉
- Organizer
  日本実験力学会 2011 会年会講演会講演論文集
- Place of Presentation
  奈良県文化会館,奈良
- Data Source
  KAKENHI-PROJECT-23360330

1. UEMURA Tomomasa (70029536)

# of Collaborated Projects : 2results

# of Collaborated Products : 0results
2. MORITA Zen-ichiro (80028969)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
3. YOKOYA Shinichiro (80049692)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
4. TAKAGI Shigeo (30265368)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
5. SASAKI Yasushi (90281782)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
6. KUDOH Masayuki (00001248)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
7. ISHII Kuniyoshi (00001214)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
8. KASHIWAYA Yoshiaki (10169435)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
9. 植田芳昭 (00599342)

# of Collaborated Projects : 1results

# of Collaborated Products : 3results

Iguchi Manabu 井口 学

IGUCHI Manabu 井口 学

井口 学 イグチ マナブ

Research Projects

Research Products

Co-Researchers

Enhancement of refining efficiency due to fluid flow control of slag, metal and gasPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

光触媒効果を利用した気液分離装置の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Measurements of the deformation stress of molten mold fluxes

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

動的画像解析法による流動粒子数測定法の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

DEVELOPMENT OF VELOCIMETRYPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Removal of inclusion through fine bubble and bubble-curtain by imparting swirling flow in immersion nozzle

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of a New Velocimetry for Fluid Flow of High Temperature Molten MetalPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

THREE-DIMENSIONAL PTV MEASUREMENT OF MIXING FLOW BY BUBBLING JET IN A CYLINDRICAL VESSEL

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Experimental Study of Turbulence Structure in Pulsatile Pipe FlowPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Experimental Study of Turbulent Slugs in Pulsatile Pipe FlowPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] In-situ formation of Ti-Al Alloy Thin Tubes in Iron Bodies2013

Author(s)

Journal Title

Data Source

[Journal Article] 急縮小部を有する微小流路内気液二相流の気泡速度に及ぼす流路高さの影響2013

Author(s)

Journal Title

Data Source

[Journal Article] Formation Behaviors of Microchannels in Ni-Al Alloys by Sacrificial Core Method2013

Author(s)

Journal Title

Data Source

[Journal Article] 急縮小部を有する微小流路内気液二相流の気泡速度に及ぼす流路高さの影響2013

Author(s)

Iguchi Manabu 井口学

IGUCHI Manabu 井口学

井口学イグチマナブ