Ishikawa Ken-ichi 石川憲一

… Alternative Names

ISHIKAWA Ken-ichi 石川憲一

Less

Researcher Number	00064452
Other IDs
Affiliation (Current)	2025: 金沢工業大学, 明倫館, 名誉学長・教授
Affiliation (based on the past Project Information) *help	2019 – 2021: 金沢工業大学, 明倫館, 名誉学長・教授 2018: 金沢工業大学, 名誉学長, 教授 2017: 金沢工業大学, 工学部, 教授 2006 – 2010: 金沢工業大学, 工学部, 教授 2003 – 2004: 金沢工業大学, 工学部, 教授 … More 1999 – 2001: 金沢工業大学, 工学部, 教授 1994 – 1997: 金沢工業大学, 工学部, 教授 1988 – 1991: 金沢工業大学, 工学部, 教授 Less
Review Section/Research Field	Principal Investigator 機械工作・生産工学 / Production engineering/Processing studies / 機械工作 / Design engineering/Machine functional elements/Tribology
Keywords	Principal Investigator Slicing / 硬脆材料 / スライシング / ダイヤモンド砥粒 / Grinding / 切断 / 研削 / マルチワイヤソー / Cutting / 振動 … More / Hard and brittle material / Semiconductor material / 半導体材料 / Wire tool / ワイヤ工具 / High Accuracy / 高精度 / Vibration / Lapping / Abrasive Grains / ラッピング / 遊離砥粒 / 高能率 / 砥粒加工 / 切断加工 / 評価・設計法 / 3次元形状分析と設計 / AI / 作刀 / 設計法 / 作刀評価 / 3次元設計 / AI分析 / 可視化 / 設計・評価法 / 美 / 日本刀 / High Efficiency / Hard and Brittle Material / Multiwire Sawing / Diamond Grains / 加工クラック層 / ラッピング加工 / マルチワイヤソ- / Diamond pellets / High precision lapping / Material machining / Mechanical machining / ダイヤモンドペレット / 精密研磨 / 材料加工・処理 / 機械工作・生産工学 / Slurry Actions / Multi-Wire Saw / スラリー / スラリー挙動 / Chipping / ID-blade saw / 振動加工 / チッピング / 内周刃 / Spiral / Chip-pocket / Twisted wire / Electrodeposited / Diamond grain / 螺旋状 / チップポケット / 縒り線 / 電着 / 研削切断 / Long Life of Tool / OD-blade / Low Frequency Vibration / Applied Vibrations / 長寿命 / 外周刃ブレ-ド / 低周波振動 / 振動応用 / Correcting Carrier / Surface Roughness / Profile / Correct Processing / Grooved Laping Plate / 表面粗さ / 修正加工 / 目切り定盤 / プロファイル / 工具寿命 / 外周刃 / 複合材料 / 切削・研削加工 Less

Proposal and its verification of novel evaluation/ design method of Japanese sword based on scientific elucidation for beautyPrincipal Investigator
- Principal Investigator
  
  ISHIKAWA Ken-ichi
- Project Period (FY)
  2017 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Kanazawa Institute of Technology
Development of vibratory OD-blade slicing method with high efficiency and long tool life for composite materialsPrincipal Investigator
- Principal Investigator
  
  ISHIKAWA Ken-ichi
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kanazawa Institute of Technology
Development of High Accuracy Process Technique in 4-way System Diamond Pellets GrindingPrincipal Investigator
- Principal Investigator
  
  ISHIKAWA Ken-ichi
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kanazawa Institute of Technology
Relationship Between Slurry Actions in Slicing Grooves and Slicing Characteristics at Multi-Wire Saw to slice semiconductor materialsPrincipal Investigator
- Principal Investigator
  
  ISHIKAWA Ken-ichi
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kanazawa Institute of Technology
Development of ID-blade saw using elliptical vibrationPrincipal Investigator
- Principal Investigator
  
  ISHIKAWA Ken-ichi
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kanazawa Institute of Technology
Development of high speed processing silicon slicer using diamond wire toolPrincipal Investigator
- Principal Investigator
  
  ISHIKAWA Ken-ichi
- Project Period (FY)
  1999 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kanazawa Institute of Technology
Study on development of electrodeposited diamond wire tool which ensures high machining efficiency and longer life of toolPrincipal Investigator
- Principal Investigator
  
  ISHIKAWA Ken-ichi
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kanazawa Institute of Technology
A Study on High Accuracy of OD-bade Saw (Micro-Cutting by Vibration)Principal Investigator
- Principal Investigator
  
  ISHIKAWA Ken-ichi
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kanazawa Institute of Technology
Study on Recovering Techniques of Deteriorated Lapping Plate Used Correcting CarrierPrincipal Investigator
- Principal Investigator
  
  ISHIKAWA Ken-ichi
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Kanazawa Institute of Technology
Study on High Efficiency Sliceing for Hard and Brittle MaterialsPrincipal Investigator
- Principal Investigator
  
  ISHIKAWA Ken-ichi
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  KANAZAWA INSTITUTE OF TECHNOLOGY

All 2021 2020 2019 2018 2017 2009 2008 2007 2006 2005 2004 2003

All Journal Article Presentation

[Journal Article] <b>– Mechanical Properties of Natural and Artificial Polishing Stones and <i>Kansei</i> Evaluation by Sword Polishers –</b>2018
- Author(s)
  Kyo OI, Michio UNEDA and Ken-ichi ISHIKAWA
- Journal Title
  
  Advanced Experimental Mechanics
  
  Volume: 3 Issue: 0 Pages: 180-185
- DOI
  10.11395/aem.3.0_180
- NAID
  130007538728
- ISSN
  2189-4752, 2424-175X
- Year and Date
  2018-08-10
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06129
[Journal Article] 感性評価による日本刀の美しさに関する研究2017
- Author(s)
  畝田道雄，村上昇啓，高島伸治，神宮英夫，石川憲一
- Journal Title
  
  精密工学会誌
  
  Volume: 83 Pages: 361-366
- NAID
  130005548960
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06129
[Journal Article] Visualization of hand-polishing process for Japanese swords - Mechanical properties of natural and artificial polishing stones and Kansei evaluation by craftsmen -2017
- Author(s)
  Kyo Oi, Michio Uneda and Ken-ichi Ishikawa
- Journal Title
  
  Proceedings of 12th International Symposium on Advanced Science and Technology in Experimental Mechanics 2017
  
  Volume: 1 Pages: 1-4
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06129
[Journal Article] 複合材料(CFRP)を切断対象とした振動外周刃切断方式の加工特性に関する研究-繊維方向が切断特性に及ぼす影響-2009
- Author(s)
  畝田道雄, 成瀬尚, 山下義徳, 石川憲一
- Journal Title
  
  砥粒加工学会誌 53
  
  Pages: 627-632
- NAID
  10025533820
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560116
[Journal Article] 複合材料(CFRP)を切断対象とした振動外周刃切断方式の加工特性に関する研究-繊維方向が切断特性に及ぼす影響-2009
- Author(s)
  畝田道雄,成瀬尚,山下義徳,石川憲一
- Journal Title
  
  砥粒加工学会誌 53,10
  
  Pages: 627-632
- NAID
  10025533820
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560116
[Journal Article] 複合材料を切断対象とした振動外周刃切断方式の加工特性に関する基礎研究2008
- Author(s)
  畝田道雄,成瀬尚,石川憲一,諏訪部仁
- Journal Title
  
  砥粒加工学会誌 52,7
  
  Pages: 412-416
- NAID
  10021136831
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560116
[Journal Article] 複合材料を切断対象とした振動外周刃切断方式の加工特性に関する基礎研究2008
- Author(s)
  畝田道雄, 成瀬尚, 石川憲一, 諏訪部仁
- Journal Title
  
  砥粒加工学会誌 52
  
  Pages: 412-416
- NAID
  10021136831
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560116
[Journal Article] Basic study on fixed abrasive lapping characteristics of diamond pellets2007
- Author(s)
  Michio Uneda, Ou Sakai, Ken-ichi Ishikawa, Hitoshi Suwabe
- Journal Title
  
  Journal of the Japan Society for Abrasive Technology 51, 10
  
  Pages: 605-610
- NAID
  10019952681
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Journal Article] ダイヤモンドペレットによる定圧研削加工特性に関する研究-研削量と研削距離の相関-2007
- Author(s)
  畝田道雄, 酒井王, 石川憲一, 諏訪部仁
- Journal Title
  
  2007年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 1121-1122
- NAID
  130005028300
- Data Source
  KAKENHI-PROJECT-18560116
[Journal Article] ダイヤモンドペレットを用いた固定砥粒研磨加工特性に関する研究2007
- Author(s)
  畝田道雄, 酒井王, 石川憲一, 諏訪部仁
- Journal Title
  
  砥粒加工学会誌 51
  
  Pages: 605-610
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560116
[Journal Article] ダイヤモンドペレットを用いた固定砥粒研磨加工特性に関する研究2007
- Author(s)
  畝田道雄, 酒井王, 石川憲一, 諏訪部仁
- Journal Title
  
  砥粒加工学会誌 51
  
  Pages: 605-610
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560116
[Journal Article] ダイヤモンドペレットによる定圧研削特性に関する基本的研究2006
- Author(s)
  畝田道雄, 酒井王, 石川憲一, 諏訪部仁
- Journal Title
  
  砥粒加工学会北信越ハイテク加工研究分科会, 2006年度研究・開発成果発表会講演論文集
  
  Pages: 41-42
- Data Source
  KAKENHI-PROJECT-18560116
[Journal Article] ダイヤモンドペレットによる定圧研削特性に関する研究2006
- Author(s)
  畝田道雄, 酒井王, 石川憲一, 諏訪部仁
- Journal Title
  
  2006年度精密工学会秋季大会学術講演会講演論文集
  
  Pages: 325-326
- Data Source
  KAKENHI-PROJECT-18560116
[Journal Article] A Study on Slurry Actions in Slicing of Multi-Wire Saw2005
- Author(s)
  Ken-ichi ISHIKAWA
- Journal Title
  
  Proc.of JSPE
  
  Pages: 1-2
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560104
[Journal Article] マルチワイヤソーにおける加工中のスラリー挙動に関する研究2005
- Author(s)
  石川憲一
- Journal Title
  
  2005年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 1-2
- NAID
  130004657374
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560104
[Journal Article] Relationship between Slurry and Slicing Characteristics at Multi-Wire Saw2004
- Author(s)
  Ken-ichi ISHIKAWA
- Journal Title
  
  Proc.of JSPE
  
  Pages: 345-346
- NAID
  130004655509
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560104
[Journal Article] マルチワイヤソーにおけるスラリーが加工特性に与える影響2004
- Author(s)
  石川憲一
- Journal Title
  
  2004年度精密工学会秋季大会学術講演会講演論文集
  
  Pages: 345-346
- NAID
  130004655509
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560104
[Journal Article] マルチワイヤソーで用いるスラリーの劣化と加工特性の関係2004
- Author(s)
  石川憲一
- Journal Title
  
  2004年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 21-22
- NAID
  130004656005
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560104
[Journal Article] Relationship between Degradation of Slurry and Slicing Characteristics at Multi-Wire Saw2004
- Author(s)
  Ken-ichi ISHIKAWA
- Journal Title
  
  Proc.of JSPE
  
  Pages: 21-22
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560104
[Journal Article] 工作物降下型マルチワイヤソーにおける加工溝内でのスラリーの影響2003
- Author(s)
  石川憲一
- Journal Title
  
  日本設計工学会北陸支部平成15年度研究発表論文集
  
  Pages: 1-4
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560104
[Journal Article] Influence of Slurry in Slicing Grooves at Multi-Wire Saw2003
- Author(s)
  Ken-ichi ISHIKAWA
- Journal Title
  
  Proc.of JSDE
  
  Pages: 1-4
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560104
[Presentation] 新作日本刀の姿に着目した特徴分析並びに3次元設計法の提案と実証2021
- Author(s)
  村上浩規，畝田道雄，石川憲一
- Organizer
  日本実験力学会2021年度年次講演会講演論文集
- Data Source
  KAKENHI-PROJECT-17K06129
[Presentation] 日本刀の形状美と機能美に着目した「踏ん張り」と「樋」の科学的研究2020
- Author(s)
  横山詳悟，中村晏奈，畝田道雄，石川憲一
- Organizer
  2020年度精密工学会春季大会学術講演会講演論文集
- Data Source
  KAKENHI-PROJECT-17K06129
[Presentation] ニューラルネットワークを用いたAIによる新作日本刀の科学的特徴解析と設計法の提案2020
- Author(s)
  横山詳悟，村上浩規，畝田道雄，石川憲一
- Organizer
  2020年度精密工学会北陸信越支部学術講演会講演論文集
- Data Source
  KAKENHI-PROJECT-17K06129
[Presentation] 新作日本刀の評価・設計法の研究－現代刀の審査結果と刀職技術の科学に基づく新作日本刀の設計アプローチ－2019
- Author(s)
  大井恭，畝田道雄，石川憲一
- Organizer
  2019年度精密工学会春季大会学術講演会講演論文集
- Data Source
  KAKENHI-PROJECT-17K06129
[Presentation] 日本刀～ミレニアムを貫く鐵の芸術～2018
- Author(s)
  石川憲一
- Organizer
  2018年度砥粒加工学会学術講演会
- Invited
- Data Source
  KAKENHI-PROJECT-17K06129
[Presentation] 新作日本刀の評価・設計法の研究-刀剣研師の感性評価と現代刀の審査結果に基づく新作日本刀の設計アプローチ-2017
- Author(s)
  大井恭，畝田道雄，石川憲一
- Organizer
  2018年度精密工学会春季大会学術講演会講演論文集
- Data Source
  KAKENHI-PROJECT-17K06129
[Presentation] 日本刀の研ぎに及ぼす研磨工程の基礎科学－天然・人造砥石の機械的特性の調査と匠の意識調査－2017
- Author(s)
  大井恭，畝田道雄，石川憲一
- Organizer
  2017年度砥粒加工学会学術講演会講演論文集
- Data Source
  KAKENHI-PROJECT-17K06129
[Presentation] ダイヤモンドペレットによる固定砥粒研磨加工特性とそれに基づくペレットの最適配置シミュレーションに関する研究2008
- Author(s)
  畝田道雄, 酒井王, 石川憲一, 諏訪部仁
- Organizer
  2008年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  明治大学
- Year and Date
  2008-03-17
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Presentation] Study on fixed abrasive lapping characteristics of diamond pellets and optimized simulation of layout method of pellet2008
- Author(s)
  Michio Uneda, Ou Sakai, Ken-ichi Ishikawa, Hitoshi Suwabe
- Organizer
  Proceedings of Spring Meeting of the Japan Society for Precision Engineering
- Place of Presentation
  Meiji University
- Year and Date
  2008-03-25
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Presentation] Basic study on fixed abrasive lapping characteristics of diamond pellets2007
- Author(s)
  Michio Uneda, Ou Sakai, Ken-ichi Ishikawa, Hitoshi Suwabe
- Organizer
  Proceedings of Meeting of the Hokushinetu Research Committee on High Processing Technology
- Place of Presentation
  Kanazawa Institute of Technology
- Year and Date
  2007-07-06
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Presentation] ダイヤモンドペレットによる定圧研削加工特性に関する研究-研削量と研削距離の相関-2007
- Author(s)
  畝田道雄, 酒井王, 石川憲一, 諏訪部仁
- Organizer
  2007年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  芝浦工業大学
- Year and Date
  2007-03-20
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Presentation] ダイヤモンドペレットを用いた固定砥粒研磨加工特性に関する基礎的研究2007
- Author(s)
  畝田道雄, 酒井王, 石川憲一, 諏訪部仁
- Organizer
  2007年度砥粒加工学会学術講演会講演論文集
- Place of Presentation
  東京工業大学
- Year and Date
  2007-09-05
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Presentation] Study on Grinding Characteristics of Diamond Pellets-Relation between Grinding Profile and Grinding Distance-2007
- Author(s)
  Michio Uneda, Ou Sakai, Ken-ichi Ishikawa, Hitoshi Suwabe
- Organizer
  Proceedings of Spring Meeting of the Japan Society for Precision Engineering
- Place of Presentation
  Shibaura Institute of Technology
- Year and Date
  2007-03-20
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Presentation] ダイヤモンドペレットによる固定砥粒研磨加工特性に関する基礎研究2007
- Author(s)
  畝田道雄, 酒井王, 石川憲一, 諏訪部仁
- Organizer
  砥粒加工学会北信越ハイテク加工研究分科会2007年度研究・開発成果発表会講演論文集
- Place of Presentation
  金沢工業大学
- Year and Date
  2007-07-06
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Presentation] Basic study on fixed abrasive lapping characteristics of diamond pellets2007
- Author(s)
  Michio Uneda, Ou Sakai, Ken-ichi Ishikawa, Hitoshi Suwabe
- Organizer
  Proceedings of Meeting of the Japan Society for Abrasive Technology
- Place of Presentation
  Tokyo Institute of Technology
- Year and Date
  2007-09-05
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Presentation] Study on Grinding Characteristics of Diamond Pellets2006
- Author(s)
  Michio Uneda, Ou Sakai, Ken-ichi Ishikawa, Hitoshi Suwabe
- Organizer
  Proceedings of Fall Meeting of the Japan Society for Precision Engineering
- Place of Presentation
  Utsunomiya University
- Year and Date
  2006-09-20
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Presentation] ダイヤモンドペレットによる研削加工特性に関する基礎的研究2006
- Author(s)
  畝田道雄, 酒井王, 石川憲一, 諏訪部仁
- Organizer
  砥粒加工学会北信越ハイテク加工研究分科会2006年度研究・開発成果発表会講演論文集
- Place of Presentation
  金沢工業大学
- Year and Date
  2006-07-07
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Presentation] ダイヤモンドペレットによる定圧研削加工特性に関する研究2006
- Author(s)
  畝田道雄, 酒井王, 石川憲一, 諏訪部仁
- Organizer
  2006年度精密工学会秋季大会学術講演会講演論文集
- Place of Presentation
  宇都宮大学
- Year and Date
  2006-09-20
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560116
[Presentation] Basic Study on Grinding Characteristics of Diamond Pellets2006
- Author(s)
  Michio Uneda, Ou Sakai, Ken-ichi Ishikawa, Hitoshi Suwabe
- Organizer
  Proceedings of Meeting of the Hokushinetu Research Committee on High Processing Technology
- Place of Presentation
  Kanazawa Institute of Technology
- Year and Date
  2006-07-07
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560116

1. UNEDA Michio (00298324)

# of Collaborated Projects: 4 results

# of Collaborated Products: 30 results
2. SUWABE Hitoshi (40202139)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
3. KAJIKURA Atsushi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. NISHIMOTO Yoshinobu

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 鍛治倉惇

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Ishikawa Ken-ichi 石川 憲一

ISHIKAWA Ken-ichi 石川 憲一

Research Projects

Research Products

Co-Researchers

Proposal and its verification of novel evaluation/ design method of Japanese sword based on scientific elucidation for beautyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of vibratory OD-blade slicing method with high efficiency and long tool life for composite materialsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of High Accuracy Process Technique in 4-way System Diamond Pellets GrindingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Relationship Between Slurry Actions in Slicing Grooves and Slicing Characteristics at Multi-Wire Saw to slice semiconductor materialsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of ID-blade saw using elliptical vibrationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of high speed processing silicon slicer using diamond wire toolPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on development of electrodeposited diamond wire tool which ensures high machining efficiency and longer life of toolPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on High Accuracy of OD-bade Saw (Micro-Cutting by Vibration)Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Recovering Techniques of Deteriorated Lapping Plate Used Correcting CarrierPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on High Efficiency Sliceing for Hard and Brittle MaterialsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] <b>– Mechanical Properties of Natural and Artificial Polishing Stones and <i>Kansei</i> Evaluation by Sword Polishers –</b>2018

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

[Journal Article] 感性評価による日本刀の美しさに関する研究2017

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Visualization of hand-polishing process for Japanese swords - Mechanical properties of natural and artificial polishing stones and Kansei evaluation by craftsmen -2017

Ishikawa Ken-ichi 石川憲一

ISHIKAWA Ken-ichi 石川憲一