TAKAMATSU Tohru 高松徹

Researcher Number	00106890
Affiliation *help	2009 – 2011 : The University of Shiga Prefecture, 工学部, 教授 1992 – 1995 : The University of Electro-Communications Lecturer, 電気通信学部, 講師 1986 – 1991 : The University of Electro-Communications, 電気通信学部, 助手
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / 材料力学 / Materials/Mechanics of materials Except Principal Investigator 材料力学 / 機械材料工学
Keywords	Principal Investigator 薄膜 / 破壊 / き裂進展 / 接触応力 / Sheet Specimen / 接触荷重 / 材料設計 / Thin Film / 押し込み / 延性ーぜい性遷移 … More Except Principal Investigator 信頼性工学 / Reliability Engineering / 微小き裂 / 信頼性設計 / 押し込み強度 / 余寿命評価 / セラミックス / 構造信頼性 / 窒化硅素 / 直流電位差法 / 信頼性試験 / 押し込み破壊 / 破損確率 / 薄膜 / ΔΚ一定試験 / Proof Test / 画像処理 / 再帰期間 / 構造用セラミックス / 球圧子 / Film-substrate System / 圧子押し込み / Structural Ceramics / 強度確認試験 / セラミックス軸受 / クリ-プ疲労 / Fracture Strength / 疲労寿命 / プル-フテスト / 統計的変動 / 破損確率,ノンパラメトリック法 / Short cracks / Ceramics Bearing / 窒化珪素 / ノンパラメトリック法 / Spherical Indenter / Ceramics / Reliability-Based Design / Creep-fatigue / 実際的手法 / ファインセミラックス / Statistics of extremes / 極値統計 / Ring Crack / 疲労き裂進展速度 / Statistical Variability / 積層構造 / Reliability engineering / Fatigue Crack Growth Rate / Remaining life evaluation / Strength Confirmation Test / 信頼性評価 / Reliability Testing / Thin Film / Indentation Fracture / 強度設計 / 密着強度 / 保証試験 / Silicon Nitride / 高温疲労 / 強度保証試験 / Electric Potential Method / Fine Ceramics / セラミック軸受 / Constant <DELTA> K Test / Reliability / ファインセラミックス / 薄膜・基板系 / 信頼性 / リングクラック / 構造信頼性工学 / Image processing / 破壊強度 / Structural Reliability Less

Development of cyclic sphere indentation test to evaluate the strength of ceramic thin film deposited on the substratePrincipal Investigator
- Principal Investigator
  
  TAKAMATSU Tohru
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  The University of Shiga Prefecture
A Study on Method for Evaluating Fracture Strength of Brittle Thin Films Using a Small Spherical IndentationPrincipal Investigator
- Principal Investigator
  
  TAKAMATSU Tohru, 市川昌弘
- Project Period (FY)
  1993 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  The University of Electro-Communications
Development of Strength Confirmation Testing Method of Ceramics by Reliability Engineering
- Principal Investigator
  
  ICHIKAWA Masahiro
- Project Period (FY)
  1992 – 1994
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  材料力学
- Research Institution
  The University of Electro-Communications
A Study on Absolute Evaluation of Fracture Strength of Thin Films by Indentation
- Principal Investigator
  
  ICHIKAWA Masahiro
- Project Period (FY)
  1990 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  材料力学
- Research Institution
  The University of Electro-Communications
Influence of Loading Condition and Ligament Width on the Ductile-Brittle Transition Behavior under Mixed-Mode Loading Condition (in the case of Mode I-II Mixed-Mode Condition)Principal Investigator
- Principal Investigator
  
  TAKAMATSU Tohru
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  材料力学
- Research Institution
  The University of Electro-Communications
Development of Optimum Proof Testing Method of Structural Ceramics
- Principal Investigator
  
  ICHIKAWA Masahiro
- Project Period (FY)
  1989 – 1991
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research.
- Research Field
  
  機械材料工学
- Research Institution
  The University of Electro-Communications
Development of A Reliability-based Method for Remaining Life Evaluation Using Extremes Statistics Analysis of Short Fatigue Cracks
- Principal Investigator
  
  ICHIKAWA Masahiro
- Project Period (FY)
  1987 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  材料力学
- Research Institution
  The University of Electro-Communications
Reliability Engineering Approach to Fatigue Crack Growth Rate by Constant <DELTA> K Tests
- Principal Investigator
  
  ICHIKAWA Masahiro
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械材料工学
- Research Institution
  The University of Electro-Communications
Development of practical Methods for Design and Reliablility Testing Based on Structura Reliability Engineering
- Principal Investigator
  
  ICHIKAWA Masahiro
- Project Period (FY)
  1985 – 1987
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  材料力学
- Research Institution
  The University of Electro-Communications

All 2012 2011 2010 2009 Other

All Journal Article Presentation

[Journal Article] 繰返し球圧子押込み試験によるセラミック被覆超硬合金における薄膜の耐久特性評価
- Author(s)
  高松徹, 田邉裕貴, 和泉遊以, 堀井重希
- Journal Title
  
  日本機械学会論文集
  
  Volume : (投稿中)
- Data Source
  KAKENHI-PROJECT-21560098
[Presentation] 球圧子押込み荷重下の各種セラミック被覆材における薄膜の破壊挙動2012
- Author(s)
  高松徹, 田邉裕貴, 和泉遊以, 堀井重希
- Organizer
  日本機械学会関西支部第87期定時講演会
- Year and Date
  2012-03-16
- Data Source
  KAKENHI-PROJECT-21560098
[Presentation] 球圧子押込み荷重下の各種セラミック被覆材における薄膜の破壊挙動2012
- Author(s)
  高松徹, 田邉裕貴, 和泉遊以, 堀井重希
- Organizer
  日本機械学会関西支部第87期定時講演会
- Place of Presentation
  関西大学
- Year and Date
  2012-03-16
- Data Source
  KAKENHI-PROJECT-21560098
[Presentation] 球圧子押込み荷重または四点曲げ荷重条件の疲労試験によるガラスの強度評価2012
- Author(s)
  高松徹, 田邉裕貴, 和泉遊以, 李征
- Organizer
  日本機械学会関西支部第87期学生員卒業研究発表講演会
- Place of Presentation
  関西大学
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-21560098
[Presentation] 球圧子押込み疲労試験による各種セラミック被覆材における薄膜のき裂・はく離発生強度評価2011
- Author(s)
  高松徹, 田邉裕貴, 和泉遊以, 堀井重希
- Organizer
  日本材料学会高温強度・破壊力学合同シンポジウム
- Year and Date
  2011-11-25
- Data Source
  KAKENHI-PROJECT-21560098
[Presentation] 球圧子押込み疲労試験による各種セラミック被覆材における薄膜のき裂・はく離発生強度評価2011
- Author(s)
  高松徹, 田邉裕貴, 和泉遊以, 堀井重希
- Organizer
  日本材料学会高温強度・破壊力学合同シンポジウム
- Place of Presentation
  石垣市商工会館
- Year and Date
  2011-11-25
- Data Source
  KAKENHI-PROJECT-21560098
[Presentation] 球圧子押込み静荷重下,または繰返し荷重下のガラス基板,TiN被覆ガラス基板における薄膜および基板の破壊挙動2011
- Author(s)
  高松徹, 田邉裕貴, 西村一平, 小田達来
- Organizer
  日本機械学会関西支部関西学生会平成22年度学生員卒業研究発表講演会
- Place of Presentation
  京都工芸繊維大学
- Year and Date
  2011-03-18
- Data Source
  KAKENHI-PROJECT-21560098
[Presentation] 球圧子押込み繰返し荷重下の超硬合金WC-Co基板,TiN被覆WC-Co基板における薄膜および基板の破壊挙動2011
- Author(s)
  高松徹, 田邉裕貴, 堀井重希, 宗川知加
- Organizer
  日本機械学会関西支部関西学生会平成22年度学生員卒業研究発表講演会
- Place of Presentation
  京都工芸繊維大学
- Year and Date
  2011-03-18
- Data Source
  KAKENHI-PROJECT-21560098
[Presentation] 球圧子押込み繰返し荷重下の超硬合金WC-Co基板, TiN被覆WC-Co基板における薄膜および基板の破壊挙動2011
- Author(s)
  高松徹, 田邉裕貴, 堀井重希, 宗川知加
- Organizer
  日本機械学会関西支部関西学生会学生生員卒業研究発表講演会
- Year and Date
  2011-03-18
- Data Source
  KAKENHI-PROJECT-21560098
[Presentation] 球圧子押込み疲労試験によるTiN被覆材料における薄膜の強度評価2010
- Author(s)
  高松徹, 田邉裕貴, 小島一晃
- Organizer
  日本機械学会関西支部第5期定時総会講演論文集
- Data Source
  KAKENHI-PROJECT-21560098
[Presentation] 球圧子押込み疲労試験によるセラミック被覆材における薄膜の強度特性評価2009
- Author(s)
  高松徹, 田邉裕貴小島一晃(院), 田島俊宏(シマノ)
- Organizer
  日本材料学会第14回破壊力学シンポジウム
- Place of Presentation
  沖縄県石垣市
- Year and Date
  2009-10-24
- Data Source
  KAKENHI-PROJECT-21560098

1. ICHIKAWA Masahiro (80017334)

# of Collaborated Projects : 7results

# of Collaborated Products : 0results
2. OKABE Nagatoshi

# of Collaborated Projects : 3results

# of Collaborated Products : 0results
3. MATSUMURA Takashi (00251710)

# of Collaborated Projects : 2results

# of Collaborated Products : 0results
4. AKITA Satoshi (60017390)

# of Collaborated Projects : 2results

# of Collaborated Products : 0results
5. 田邊裕貴 (00275174)

# of Collaborated Projects : 1results

# of Collaborated Products : 11results

TAKAMATSU Tohru 高松 徹

Research Projects

Research Products

Co-Researchers

Development of cyclic sphere indentation test to evaluate the strength of ceramic thin film deposited on the substratePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on Method for Evaluating Fracture Strength of Brittle Thin Films Using a Small Spherical IndentationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Strength Confirmation Testing Method of Ceramics by Reliability Engineering

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on Absolute Evaluation of Fracture Strength of Thin Films by Indentation

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Influence of Loading Condition and Ligament Width on the Ductile-Brittle Transition Behavior under Mixed-Mode Loading Condition (in the case of Mode I-II Mixed-Mode Condition)Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Optimum Proof Testing Method of Structural Ceramics

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of A Reliability-based Method for Remaining Life Evaluation Using Extremes Statistics Analysis of Short Fatigue Cracks

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Reliability Engineering Approach to Fatigue Crack Growth Rate by Constant <DELTA> K Tests

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of practical Methods for Design and Reliablility Testing Based on Structura Reliability Engineering

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 繰返し球圧子押込み試験によるセラミック被覆超硬合金における薄膜の耐久特性評価

Author(s)

Journal Title

Data Source

[Presentation] 球圧子押込み荷重下の各種セラミック被覆材における薄膜の破壊挙動2012

Author(s)

Organizer

Year and Date

Data Source

[Presentation] 球圧子押込み荷重下の各種セラミック被覆材における薄膜の破壊挙動2012

Author(s)

Organizer

Place of Presentation

Year and Date

Data Source

[Presentation] 球圧子押込み荷重または四点曲げ荷重条件の疲労試験によるガラスの強度評価2012

Author(s)

Organizer

Place of Presentation

Year and Date

Data Source

[Presentation] 球圧子押込み疲労試験による各種セラミック被覆材における薄膜のき裂・はく離発生強度評価2011

TAKAMATSU Tohru 高松徹