Takahashi Katsuhiko 高橋勝彦

… Alternative Names

TAKAHASHI Katsuhiko 高橋勝彦

高橋勝彦タカハシカツヒコ

Less

Researcher Number	00187999
Other IDs
Affiliation (based on the past Project Information) *help	2020 – 2023: 広島大学, 先進理工系科学研究科(工), 教授 2018 – 2019: 広島大学, 工学研究科, 教授 2016: 広島大学, 工学研究院, 教授 2012 – 2015: 広島大学, 工学(系)研究科(研究院), 教授 2013: 広島大学, 工学研究院, 教授 … More 2012: 広島大学, 大学院・工学研究科, 教授 2010 – 2012: 広島大学, 大学院・工学研究院, 教授 2008: 広島大学, 大学院・工学研究科・生産計画システム, 教授 2003 – 2008: Hiroshima University, Faculty of Engineering, Professor, 大学院・工学研究科, 教授 2007: 広島大学, 工学研究科, 教授 2006: 広島大学, 大学院工学研究科, 教授 2001 – 2002: 広島大学, 大学院・工学研究科, 助教授 1996 – 2000: 広島大学, 工学部, 助教授 1994: 広島大学, 工学部, 助教授 Less
Review Section/Research Field	Principal Investigator Social systems engineering/Safety system / 社会システム工学 / Basic Section 25010:Social systems engineering-related / Social systems engineering/Safety system Except Principal Investigator Social systems engineering/Safety system / 社会システム工学 / Medium-sized Section 25:Social systems engineering, safety engineering, disaster prevention engineering, and related fields / Social systems engineering/Safety system / Naval and maritime engineering
Keywords	Principal Investigator 機動的生産 / 適応型システム / 再構成可能生産システム / 生産管理 / ジャストインタイム生産 / かんばん方式 / 生産管理方式 / Reactive Ordering / Just-in-Time System / Concurrent Ordering System … More / Kanban System / Production Ordering / Multi-stage Production System / Production Control / 適応型生産指示方式 / コンカレント型指示方式 / 生産指示方式 / 多段階生産在庫システム / 流動的生産環境 / 持続可能性 / セル生産システム / ハイブリッド生産システム / transient behavior / queuing network / control chart / production management / agile manufacturing / unstable changes / adaptive system / reconfigurable manufacturing / 持ち行列ネットワーク / 生産過渡特性 / 待ち行列ネットワーク / 管理図 / 非定常変動需要 / Evolutionary Ordering / 進化型システム / Switching of Ordering Systems / 指示方式の切替え / 混成生産システム / 多様的生産環境 / 習熟 / 受容の非定常変化 / セルフォーメーション問題 / ラインバランシング問題 / 需要の非定常変化 / 変種変量生産 / マスカスタマイゼーション / 機動的管理方式 / 臨機応変生産指示方式 / シミュレーション / 待ち行列ネットワークモデル / 引張り型生産指示方式 / シーケンシャル型生産指示方式 / コンカレント型生産指示方式 … More Except Principal Investigator ベイジアン / 経営工学 / 生産システム / SCM / PLM / エージェントベースシミュレーション / 非協力ゲーム / エージェントベース・シミュレーション / サプライチェーン / 協力ゲーム / 非協力ゲーム / 協調的生産モデル / 作業者スキル / 作業スキル / 混成 / ロバスト / Cell production system / Neuro DP algorithm / Autonomous decentralized system / Optimizing algorithm / Optimal production and distribution systems / Just-In-Time production system / 最適物流・生産システム / 3次元積み降ろし問題 / 配送計画問題 / 最適搬送計画 / U字生産ライン / かんばん方式 / JIT生産システム / セル生産システム / ニューロDPアルゴリズム / 自律分散型システム / 最適化アルゴリズム / 最適生産・物流システム / ジャストインタイム生産システム / Human Factor / Robustness / Scheduling / Perturbation Analysis / Project Scheduling / Multi-Agent / Virtual Manufacturing System / Agile Manufacturing / 分散処理 / ネゴシエーション / 分枝限定法 / リサイクリック生産システム / リエントラント生産システム / システムダイナミクス / ヒューマンファクター / ロバストネス / スケジューリング / 摂動分析 / プロジェクトスケジューリング / マルチエージェント / バーチャル生産システム / 機動的生産 / システム / 生産 / スキル / ERPシステム / 事業ライフサイクル / 製品ア－キテクチャ / 製品開発 / 製品プラットフォーム / 生産マネジメント / 工場システム / 製品アーキテクチャ / 製品戦略 / 製品プラットホーム / 製品モデル / 最適化 / プロセス / 船舶生産システム / 船舶設計システム / サステナブルプロジェクトマネジメント / 統合BOM / サステナブルブロジェクトマネジメント / 事業創造戦略 / シミュレーション / BOM / 協働的生産管理 / 需給マネジメント / サステテイナブルプロジェクトマネジメント / 事業創造プロセス / 物流計画 / 物流拠点配置 / マテリアルリサイクル / リユース / リサイクル物流 Less

Development and evaluation of production management system for hybrid production systems to enhance sustainabilityPrincipal Investigator
- Principal Investigator
  
  Takahashi Katsuhiko
- Project Period (FY)
  2020 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 25010:Social systems engineering-related
- Research Institution
  Hiroshima University
Evaluation for effectiveness of cooperative production model with resource pooling
- Principal Investigator
  
  Nishizaki Ichiro
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Challenging Research (Exploratory)
- Review Section
  
  Medium-sized Section 25:Social systems engineering, safety engineering, disaster prevention engineering, and related fields
- Research Institution
  Hiroshima University
Dynamic Robust Mixed Production Planning using Baysian Network for Worker Skill Management
- Principal Investigator
  
  KATAOKA Takayuki
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Kindai University
Development of Agile Control Method for Adaptive Mixed Production Systems under Varied and Unstable Production EnvironmentsPrincipal Investigator
- Principal Investigator
  
  TAKAHASHI Katsuhiko
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Hiroshima University
Dynamic Production Planning using Bayesian Network for Management Operation Skills
- Principal Investigator
  
  KATAOKA Takayuki
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Kinki University
Development of Agile Control Method for Adaptive Production Systemsunder Unstable Production EnvironmentsPrincipal Investigator
- Principal Investigator
  
  TAKAHASHI Katsuhiko
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Hiroshima University
Integrated Business Processes between Product Strategy and Product DevelopmentProcess and Factory System Management, and Development of the Reference Model
- Principal Investigator
  
  TAMAKI Kin'ya
- Project Period (FY)
  2009 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Aoyama Gakuin University
造船の設計・生産プロセスの計画と評価のための最適化シミュレーションシステムの開発
- Principal Investigator
  
  濱田邦裕
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Hiroshima University
Development of Agile Control for Reconfigurable Manufacturing System with Mass-customizationPrincipal Investigator
- Principal Investigator
  
  TAKAHASHI Katsuhiko
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Hiroshima University
Process Modeling and Management Methods for Business Creation Based on Integrated Product Life Cycle Management
- Principal Investigator
  
  TAMAKI Kinya
- Project Period (FY)
  2005 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Aoyama Gakuin University
Agile Control System for Reconfigurable Manufacturing SystemsPrincipal Investigator
- Principal Investigator
  
  TAKAHASHI Katsuhiko
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Hiroshima University
Study of construction of optimal production and distributio systems based on JIT philosophy
- Principal Investigator
  
  OHNO Katsuhisa
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  社会システム工学
- Research Institution
  Nagoya Institute of Technology
リサイクル物流の効率的実現方策に関する研究
- Principal Investigator
  
  奥村誠
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  社会システム工学
- Research Institution
  Hiroshima University
Studies on virtual manufacturing system toward agile manufacturing
- Principal Investigator
  
  NAKAMURA Nobuto
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  社会システム工学
- Research Institution
  Hiroshima University
A Study on Evolutionary Reactive Ordering SystemsPrincipal Investigator
- Principal Investigator
  
  TAKAHASHI Katsuhiko
- Project Period (FY)
  1998 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  社会システム工学
- Research Institution
  Hiroshima University
1996-1997Principal Investigator
- Principal Investigator
  
  TAKAHASHI Katsuhiko
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  社会システム工学
- Research Institution
  HIROSHIMA UNIVERSITY
コンカレント型生産指示方式に関する研究Principal Investigator
- Principal Investigator
  
  高橋勝彦
- Project Period (FY)
  1994
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  社会システム工学
- Research Institution
  Hiroshima University

[Book] ICIM 2021: Proceedings of the Fifteenth International Conference on Industrial Management2022
- Author(s)
  Ying Fan, Katsuhiko Takahashi (Editors)
- Total Pages
  216
- Publisher
  Beihang University Press
- ISBN
  9787512438019
- Data Source
  KAKENHI-PROJECT-20H02390
[Book] 生産管理－多様性と効率性に応える生産方式とその計画管理（JSQC選書32 ）2020
- Author(s)
  高橋　勝彦
- Total Pages
  160
- Publisher
  日本規格協会
- ISBN
  9784542504905
- Data Source
  KAKENHI-PROJECT-20H02390
[Book] ものづくりに役立つ経営工学の事典-180の知識-2014
- Author(s)
  高橋勝彦，森川克己，広谷大助
- Total Pages
  408
- Publisher
  朝倉書店
- Data Source
  KAKENHI-PROJECT-25350446
[Book] シミュレーション工学(電気・電子工学テキストシリーズ4)2007
- Author(s)
  高橋勝彦, 伊呂原隆, 関庸一, 平川保博, 森川克己
- Total Pages
  136
- Publisher
  朝倉書店
- Data Source
  KAKENHI-PROJECT-18510126
[Book] シミュレーション工学(電気・電子工学テキストシリーズ4)2007
- Author(s)
  高橋勝彦, 森川克己
- Total Pages
  136
- Publisher
  朝倉書店
- Data Source
  KAKENHI-PROJECT-18510126
[Journal Article] Balanced order batching in bucket brigade order picking systems with non-identical pickers2024
- Author(s)
  Xin Zhou, Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi, Daisuke Hirotani
- Journal Title
  
  Industrial Engineering & Management Systems
  
  Volume: 23 Pages: 34-55
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02390
[Journal Article] An enhanced bucket brigade order picking system with a conveyor2024
- Author(s)
  Xin Zhou, Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi, Daisuke Hirotani
- Journal Title
  
  Proceedings of Industrial Engineering and Management, Lecture Notes in Mechanical Engineering
  
  Volume: - Pages: 341-353
- DOI
  10.1007/978-981-97-0194-0_35
- ISBN
  9789819701933, 9789819701940
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02390
[Journal Article] Design of a robust closed-loop supply chain with backup suppliers under disruption scenarios2023
- Author(s)
  Keisuke Nagasawa, Yuki Kinoshita, Katsumi Morikawa and Katsuhiko Takahashi
- Journal Title
  
  JAMDSM
  
  Volume: 17 Issue: 5 Pages: JAMDSM0059-JAMDSM0059
- DOI
  10.1299/jamdsm.2023jamdsm0059
- ISSN
  1881-3054
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K14984, KAKENHI-PROJECT-20H02390, KAKENHI-PROJECT-23K26329
[Journal Article] Switching decisions in a hybrid MTS/MTO production system comprising multiple machines considering setup2023
- Author(s)
  Yutaro Sato, Hiroyuki Maeda, Ryusei Toshima, Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi
- Journal Title
  
  International Journal of Production Economics
  
  Volume: 263 Pages: 108877-108877
- DOI
  10.1016/j.ijpe.2023.108877
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02390
[Journal Article] Workload Balancing and Scheduling a Mixed-model Assembly Line with Fractional Task Allocation2023
- Author(s)
  森川克己, 鳥越悠希, 長沢敬祐, 高橋勝彦
- Journal Title
  
  Journal of Japan Industrial Management Association
  
  Volume: 74 Issue: 1 Pages: 13-21
- DOI
  10.11221/jima.74.13
- ISSN
  1342-2618, 2187-9079
- Year and Date
  2023-04-15
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02390
[Journal Article] Multi-objective optimization on total cost and carbon dioxide emission of coal supply for coal-fired power plants in Indonesia2022
- Author(s)
  Baskoro Firly Rachmaditya, Takahashi Katsuhiko, Morikawa Katsumi, Nagasawa Keisuke
- Journal Title
  
  Socio-Economic Planning Sciences
  
  Volume: 81 Pages: 101185-101185
- DOI
  10.1016/j.seps.2021.101185
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Journal Article] System dynamics approach in determining coal utilization scenario in Indonesia2021
- Author(s)
  Baskoro Firly Rachmaditya, Takahashi Katsuhiko, Morikawa Katsumi, Nagasawa Keisuke
- Journal Title
  
  Resources Policy
  
  Volume: 73 Pages: 102209-102209
- DOI
  10.1016/j.resourpol.2021.102209
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Journal Article] The Two-Echelon Dual-Channel Models for the Intermodal Container Terminals of the China Railway Express Considering Container Accumulation Modes2021
- Author(s)
  Guo Shujuan, Diao Cuijie, Li Gang, Takahashi Katsuhiko
- Journal Title
  
  Sustainability
  
  Volume: 13 Issue: 5 Pages: 2806-2806
- DOI
  10.3390/su13052806
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Journal Article] A Multi-Objective Optimization Model to Minimize Temporary Workers Considering the Difficulty of Tasks and the Variety of Cycle Time2017
- Author(s)
  Takayuki Kataoka, Katsumi Morikawa, Katsuhiko Takahashi
- Journal Title
  
  Asia-Pacific Journal of Industrial Management
  
  Volume: 10
- Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26350442
[Journal Article] 常時混流方式と品種別段取時間を考慮したラインセル転換モデル2017
- Author(s)
  片岡隆之，森川克己，高橋勝彦
- Journal Title
  
  日本ロジスティクスシステム学会誌
  
  Volume: 16
- NAID
  40022271719
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26350442
[Journal Article] An operator assignment model in reconfigurable labour-intensive manufacturing cells2016
- Author(s)
  Takayuki Kataoka, Katsumi Morikawa and Katsuhiko Takahashi
- Journal Title
  
  Proc. of the 17th Asia Pacific Industrial Engineering & Management Systems Conference
  
  Volume: 1 Pages: 62-69
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26350442
[Journal Article] 動的MTS/MTOハイブリッドシステムに対する在庫管理方針2016
- Author(s)
  神田翔平，高橋勝彦，森川克己
- Journal Title
  
  日本経営工学会論文誌
  
  Volume: 67 Pages: 20-28
- NAID
  130005155921
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25350446
[Journal Article] A multi-objective optimization model to minimize temporary workers considering the difficult of tasks2016
- Author(s)
  Takayuki Kataoka, Katsumi Morikawa and Katsuhiko Takahashi
- Journal Title
  
  Proc. of the 13th International Conference on Industrial Management
  
  Volume: 1 Pages: 366-373
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26350442
[Journal Article] A Comprehensive Analysis to Achieve Sustainable Production Planning in Uncertain Environments2015
- Author(s)
  Takayuki Kataoka, Katsumi Morikawa, Katsuhiko Takahashi
- Journal Title
  
  International Journal of Japan Association for Management Systems
  
  Volume: 7 Issue: 1 Pages: 25-30
- DOI
  10.14790/ijams.7.25
- NAID
  130005118177
- ISSN
  1884-2089, 2188-2460
- Language
  English
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26350442
[Journal Article] A line balancing to achieve stable performance in uncertain production environments2014
- Author(s)
  Takayuki Kataoka, Katsumi Morikawa, Katsuhiko Takahashi
- Journal Title
  
  Proc. of 18th International Working Seminar on Production Economics
  
  Volume: Proceedings Pages: 249-261
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] Heuristics method for multi-product dynamic demand lot-sizing with limited product life and warehouse capacity2014
- Author(s)
  片岡隆之，森川克己，高橋勝彦
- Journal Title
  
  日本ロジスティクスシステム学会誌
  
  Volume: 14
- NAID
  120005831118
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26350442
[Journal Article] Policy for rearranging workers for a self-balancing production line with worker learning2014
- Author(s)
  Daisuke Hirotani, Katsumi Morikawa and Katsuhiko Takahashi
- Journal Title
  
  Industrial Engineering & Management
  
  Volume: 3 Issue: 05 Pages: 1-8
- DOI
  10.4172/2169-0316.1000146
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-25350446
[Journal Article] Sustainable Production Planning Using the Ranked Positional Weight Technique and Bayesian Estimation2013
- Author(s)
  Takayuki Kataoka, Atsushi Hanafuji, Masakazu Kanezashi, Katsumi Morikawa, Katsuhiko Takahashi
- Journal Title
  
  International Journal of Japan Association for Management Systems (IJAMS)
  
  Volume: 5 Pages: 25-30
- NAID
  130004597647
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] 要員配置計画におけるリスケジューリングスキルの一抽出法2013
- Author(s)
  片岡隆之，金指正和，森川克己，高橋勝彦
- Journal Title
  
  日本ロジスティクスシステム学会誌
  
  Volume: 13 Pages: 113-120
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] Integrating Bayesian Estimation and Ranked Positional Weight Technique in Production Planning2013
- Author(s)
  Takayuki Kataoka, Masakazu Kanezashia, Katsumi Morikawa, Katsuhiko Takahashi
- Journal Title
  
  Proc. of the Asia Pacific Industrial Engineering & Management Systems Conference 2013
  
  Volume: Proceedings Pages: 48-48
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] Sustainable Production Planning using The Ranked Positional Weight Technique and Bayesian Estimation2013
- Author(s)
  Takayuki Kataoka, Atsushi Hanafuji, Masakazu Kanezashi, Katsumi Morikawa, and Katsuhiko Takahashi
- Journal Title
  
  International Journal of Japan Association for Management Systems (IJAMS)
  
  Volume: Vol.5,No.1 Pages: 2013-2013
- NAID
  130004597647
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] An Analysis Method of Rescheduling Skill on Human Resource Planning2013
- Author(s)
  Takayuki Kataoka, Masakazu Kanezashi, Katsumi Morikawa, and Katsuhiko Takahashi
- Journal Title
  
  Official Journal of The Japan Society of Logistics Systems
  
  Volume: Vol.13,No1 Pages: 113-120
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] ベイジアンネットワークを用いた管理作業スキル推定モデルの一提案(再録)2012
- Author(s)
  片岡隆之，金指正和，森川克己，高橋勝彦
- Journal Title
  
  近畿大学次世代基盤技術研究所次世代基盤技術研究所報告
  
  Volume: Vol.3 Pages: 117-122
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] An adaptive pull strategy for remanufacturing systems2012
- Author(s)
  K. Takahashi, Y. Doi, D. Hirotani, K. Morikawa
- Journal Title
  
  Journal of Intelligent Manufacturing
  
  Volume: 未定 Issue: 4 Pages: 1-17
- DOI
  10.1007/s10845-012-0710-1
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510151, KAKENHI-PROJECT-25350446
[Journal Article] An Adaptive Kanban and Production Capacity Control Mechanism2012
- Author(s)
  Leo Le Pallec Marand, Y. Sakata, D. Hirotani, K. Morikawa, K. Takahashi
- Journal Title
  
  Proceedings of the International IFIP TC5, WG 5.7 Conference on Advances in Production Management Systems
  
  Volume: 1 Pages: 1-8
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510151
[Journal Article] An adaptive pull strategy for remanufacturing systems, Journal of Intelligent Manufacturing2012
- Author(s)
  K. Takahashi, Y. DOI:, D. Hirotani and K. Morikawa
- Journal Title
  
  Online first
  
  Pages: 1-17
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510151
[Journal Article] A Study of Improvement and Analysis Points for HRP using Bayesian Networks2012
- Author(s)
  Takayuki Kataoka, Masakazu Kanezashi, Katsumi Morikawa, and Katsuhiko Takahashi
- Journal Title
  
  Proceedings of The 7th International Congress on Logistics and SCM Systems
  
  Volume: Proceedings
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] A modified multi-agent system for simple assembly line balancing2012
- Author(s)
  K. Yokoyama, K. Morikawa and K. Takahashi
- Journal Title
  
  Journal of Mathematics and System Science
  
  Volume: 2 Pages: 299-314
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510151
[Journal Article] A Study of Improvement and Analysis Points for HRP using Bayesian Networks2012
- Author(s)
  Takayuki Kataoka, Masakazu Kanezashi, Katsumi Morikawa, and Katsuhiko Takahashi
- Journal Title
  
  Proc. of The 7th International Congress on Logistics and SCM Systems, Seoul, Korea
  
  Volume: June 7-9
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] Result-based production ordering systems -a review and research issues2011
- Author(s)
  K. Takahashi, and K. Morikawa
- Journal Title
  
  日本経営工学会論文誌
  
  Volume: 62 Pages: 109-116
- NAID
  110008762528
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510151
[Journal Article] An Inference Method of Management Operations using Bayesian Networks2011
- Author(s)
  Takayuki Kataoka,Masakazu Kanezashi,Katsumi Morikawa,and Katsuhiko Takahashi
- Journal Title
  
  Proceedings of 21st International Conference on Production Research
  
  Volume: Proceedings Pages: 230-235
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] Inventory control in a two-echelon dual-channel supply chain with setup of production and delivery2011
- Author(s)
  K. Takahashi, T. Aoi, D. Hirotani, and K. Morikawa
- Journal Title
  
  International Journal of Production Economics
  
  Volume: 133 Pages: 403-415
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510151
[Journal Article] A Probabilistic Inference Model for Management Operation's Skill using Bayesian Networks2011
- Author(s)
  Takayuki Kataoka, Masakazu Kanezashi, Katsumi Morikawa, and Katsuhiko Takahashi
- Journal Title
  
  Official Journal of The Japan Society of Logistics Systems
  
  Volume: Vol.11,No1 Pages: 37-44
- NAID
  40019383048
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] An Inference Method of Management Operations using Bayesian Networks2011
- Author(s)
  Takayuki Kataoka, Masakazu Kanezashi, Katsumi Morikawa, and Katsuhiko Takahashi
- Journal Title
  
  Proc. of 21st International Conference on Production Research, Stuttgart, Germany
  
  Volume: July31-August4
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] ベイジアンネットワークを用いた管理作業スキル推定モデルの一提案2011
- Author(s)
  片岡隆之，金指正和，森川克己，高橋勝彦
- Journal Title
  
  日本ロジスティクスシステム学会誌
  
  Volume: 11 Pages: 37-44
- NAID
  40019383048
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23710186
[Journal Article] Inventory control in a two-echelon dual-channel supply chain with setup of production and delivery,", Vol.133, pp.403-415, 2011.52011
- Author(s)
  K.Takahashi, T.Aoi, D.Hirotani, K.Morikawa
- Journal Title
  
  International Journal of Production Economics
  
  Volume: 133 Pages: 403-415
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510151
[Journal Article] An inventory control policy with tracking information for dual-channel supply chains2011
- Author(s)
  H. Nagao, K. Takahashi, K. Morikawa, and D. Hirotani
- Journal Title
  
  Brazilian Journal of Operations and Production Management
  
  Volume: 8 Pages: 121-146
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510151
[Journal Article] Result-based production ordering systems-a review and research issues2011
- Author(s)
  K.Takahashi, K.Morikawa
- Journal Title
  
  日本経営工学会論文誌
  
  Volume: 62 Pages: 109-116
- NAID
  110008762528
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510151
[Journal Article] Adaptive Kanban control systems for two-stage production lines2010
- Author(s)
  K.Takahashi, K.Morikawa, D.Hirotani, T.Yoshikawa
- Journal Title
  
  Int'l Journal of Manufacturing Technology and Management
  
  Volume: 20 Pages: 75-93
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510151
[Journal Article] Adaptive Kanban control systems for two-stage production lines2010
- Author(s)
  K. Takahashi, K. Morikawa, D. Hirotani, and T. Yoshikawa
- Journal Title
  
  International Journal of Manufacturing Technology and Management
  
  Volume: 20 Pages: 75-93
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510151
[Journal Article] A multi-agent system for assmbly line balancing2008
- Author(s)
  Kana Yokoyama, Katsumi Morikawa andKatsuhiko Takahashi
- Journal Title
  
  Asia-Pacific Journal of Industrial Management Vol. 1, No. 1
  
  Pages: 54-61
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] A multi-agent system for assembly line balancing2008
- Author(s)
  K. Yokoyama, K. Morikawa, K. Takahashi
- Journal Title
  
  Asia-Pacific Journal of Industrial Management Vol.1,No.1
  
  Pages: 54-61
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510126
[Journal Article] A multi-agent system for assembly line balancing2008
- Author(s)
  Kana Yokoyama, Katsumi Morikawa Katsuhiko Takahashi
- Journal Title
  
  Asia-Pacific Journal of Industrial Management 1
  
  Pages: 54-61
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510126
[Journal Article] A multi-agent system for assembly line balancing2008
- Author(s)
  Kana Yokoyama, Katsumi Morikawa, Katsuhiko Takahashi
- Journal Title
  
  Asia-Pacific Journal of Industrial Management Vol. 1, No. 1
  
  Pages: 54-61
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] Order acceptance and rejection decision for MTS and MTO production systems2008
- Author(s)
  Sujan Piya, Katsumi Morikawa, Katsuhiko Takahashi
- Journal Title
  
  Asia-Pacific Journal of Industrial Management Vol. 1, No. 1
  
  Pages: 24-36
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] Inventory control for a MARKOVIAN remanufacturing system with stochastic decomposition process2007
- Author(s)
  Katsuhiko Takahashi, Katsumi Morikawa, Myreshka, Daisuke Takeda, and Akihiko Mizuno
- Journal Title
  
  International Journal of Production Economics Vol. 108, Nos. 1-2
  
  Pages: 416-425
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] Comparing kanban control with the theory of constraints using Markov chains2007
- Author(s)
  K. Takahashi, K. Morikawa, Y.-C. Chen
- Journal Title
  
  International Journal of Production Research Vol.45,No.2
  
  Pages: 3599-3617
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510126
[Journal Article] Inventory control for a MARKOVIAN remanufacturing system with stochastic decomposition process2007
- Author(s)
  K. Takahashi, K. Morikawa, Myreshka, D. Takeda, A. Mizuno
- Journal Title
  
  International Journal of Production Economics Vol.108,No.2
  
  Pages: 416-425
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510126
[Journal Article] Comparing kanban control with the theory of constraints using Markov chains2007
- Author(s)
  K. Takahashi, K. Morikawa, Y. -C. Chen
- Journal Title
  
  International Journal of Production Research 45
  
  Pages: 3599-3617
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510126
[Journal Article] Inventory control for a MARKOVIAN remanufacturing system with stochastic decomposition process2007
- Author(s)
  K. Takahashi, K. Morikawa, Myreshka, D. Takeda, A. Mizuno
- Journal Title
  
  International Journal of Production Economics 108
  
  Pages: 416-425
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510126
[Journal Article] サステイナブル企業支援のための需給マネジメントと協働的生産管理2007
- Author(s)
  松井正之, 石井信明, 高橋勝彦, 森川克己
- Journal Title
  
  青山学院大学総合研究所 eラーニング人材育成研究センター(eLPCO) 研究叢書 2・1
  
  Pages: 25-35
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] 需給開発マネジメントと協働的生産管理2006
- Author(s)
  松井正行, 高橋克彦, 森川克己
- Journal Title
  
  青山学院大学総合研究所eラーニング人材育成研究センター研究叢書 ISSN 1880-9766 1・1
  
  Pages: 21-31
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] Analysis and design of self-balancing production line2006
- Author(s)
  Daisuke Hirotani, Myreshka, Katsumi Morikawa and Katsuhiko Takahashi
- Journal Title
  
  Computers & Industrial Engineering Vol. 50, No.4
  
  Pages: 488-502
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] 統合化PLM指向の事業創造プロセス研究2006
- Author(s)
  玉木欽也,渡辺一衛,高橋勝,越島一郎,研究部会メンバ8 名
- Journal Title
  
  青山学院大学総合研究所研究叢書ISSN1880-9766 第1巻第1号
  
  Pages: 1-80
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] かんばん方式の研究と課題2006
- Author(s)
  高橋勝彦
- Journal Title
  
  日本経営工学会論文誌 Vol.57,No.2
  
  Pages: 89-100
- NAID
  110007521664
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510126
[Journal Article] 動的なラインバランシングとバッファサイズの設定による需要の非定常変動への適応2006
- Author(s)
  高橋勝彦,森川克己
- Journal Title
  
  日本経営工学会論文誌 Vol.57,No.4
  
  Pages: 278-288
- NAID
  110007521658
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] 動的なラインバランシン具とバッファサイズの設定による需要の非定常変動への適応2006
- Author(s)
  高橋勝彦, 森川克己
- Journal Title
  
  日本経営工学会論文誌 57・4
  
  Pages: 278-288
- Data Source
  KAKENHI-PROJECT-18510126
[Journal Article] eラーニングによる協調型実習の設計法と「生産システム設計」授業への適用2006
- Author(s)
  筧宗徳,山田哲男,高橋道哉,渡辺一衛
- Journal Title
  
  日本教育工学会論文誌 Vol.29,No.3
  
  Pages: 349-358
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] かんばん方式の研究と課題2006
- Author(s)
  高橋勝彦
- Journal Title
  
  日本経営工学会論文誌 57・2
  
  Pages: 89-100
- NAID
  110007521664
- Data Source
  KAKENHI-PROJECT-18510126
[Journal Article] 動的なラインバランシングとバッファサイズの設定による需要の非定常変動への適応2006
- Author(s)
  高橋勝彦, 森川克己
- Journal Title
  
  日本経営工学会論文誌 Vol.57,No.4
  
  Pages: 278-288
- NAID
  110007521658
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510126
[Journal Article] A new heuristic method for capacitated lot-sizing in multi-stage, multi-machine production systems2005
- Author(s)
  Chao Rong, Katsuhiko Takahashi, and Katsumi Morikawa
- Journal Title
  
  日本経営工学会論誌 Vol.56,No.5
  
  Pages: 313-320
- NAID
  110007539926
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] 自己バランス機能を備えた生産ラインの解析2005
- Author(s)
  広谷大助, 森川克己, 高橋勝彦
- Journal Title
  
  日本経営工学会論文誌 Vol. 56, No. 3
  
  Pages: 155-163
- NAID
  110007539909
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] eラーニングによる「生産システム設計」に関する授業内容の開発2005
- Author(s)
  筧宗徳,山田哲男,高橋道哉,渡辺一衛
- Journal Title
  
  電気学会論文誌C(電子) Vol.125, No.4
  
  Pages: 653-659
- NAID
  10015576489
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] Comparing CONWIP, synchronized CONWIP, and Kariban in complex supplychain2005
- Author(s)
  Katsuhiko Takahashi
- Journal Title
  
  International Journal of Production Economics 93-94
  
  Pages: 25-40
- Data Source
  KAKENHI-PROJECT-15510132
[Journal Article] eラーニングによる協調型実習の設計法と「生産システム設計」授業への適用2005
- Author(s)
  筧宗徳, 山田哲男, 高橋道哉, 渡邊一衛
- Journal Title
  
  日本教育工学会論文誌 29(3)
  
  Pages: 349-358
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] Comparing CONWIP, synchronized CONWIP, and Kanban in complex supply chain2005
- Author(s)
  Katsuhiko Takahashi, Myreshka, and Daisuke Hirotani
- Journal Title
  
  International Journal of Production Economics Vols. 93-94
  
  Pages: 25-40
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17310100
[Journal Article] Comparing CONWIP, synchronized CONWIP, and Kanban in complex supply chain2005
- Author(s)
  Katsuhiko Takahashi
- Journal Title
  
  International Journal of Production Economics Vols.93-94
  
  Pages: 25-40
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15510132
[Journal Article] Comparing CONWIP, synchronized CONWIP, and Kanban in complex supply chain2005
- Author(s)
  Katsuhiko Takahashi
- Journal Title
  
  International Journal of Production Economics 93-94
  
  Pages: 25-40
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15510132
[Journal Article] Reactive JIT ordering system for changes in the mean and variance of demand2004
- Author(s)
  Katsuhiko Takahashi
- Journal Title
  
  International Journal of Production Economics Vol.92, No. 2
  
  Pages: 181-196
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15510132
[Journal Article] Push, pull, or hybrid control in supply chain management2004
- Author(s)
  Katsuhiko Takahashi
- Journal Title
  
  International Journal of Computer Integrated Manufacturing Vol.17, No. 2
  
  Pages: 126-140
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15510132
[Journal Article] Reactive JIT ordering system for changes in the mean and variance of demand2004
- Author(s)
  Katsuhiko Takahashi
- Journal Title
  
  International Journal of Production Economics 92・2
  
  Pages: 181-196
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15510132
[Journal Article] Push, pull, or hybrid control in supply chain management2004
- Author(s)
  Katsuhiko Takahashi
- Journal Title
  
  International Journal of Computer Integrated Manufacturing 17・2
  
  Pages: 126-140
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15510132
[Journal Article] 在庫実績に基づく適応型かんばん方式2003
- Author(s)
  高橋勝彦
- Journal Title
  
  日本経営工学会論文誌 54・3
  
  Pages: 160-167
- NAID
  110004050332
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15510132
[Journal Article] Comparing reactive Kanban systems2003
- Author(s)
  Katsuhiko Takahashi
- Journal Title
  
  International Journal of Production Research 41・18
  
  Pages: 4317-4337
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15510132
[Journal Article] Comparing reactive Kanban systems2003
- Author(s)
  Katsuhiko Takahashi
- Journal Title
  
  International Journal of Production Research Vol.41, No. 18
  
  Pages: 4317-4337
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15510132
[Journal Article] A Reactive Kanban System based on Inventory Levels2003
- Author(s)
  Katsuhiko Takahashi
- Journal Title
  
  Journal of Japan Industrial Management Association Vol.54, No. 3
  
  Pages: 160-167
- NAID
  110004050332
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15510132
[Presentation] Configuration of machines and a multistep switching policy in dynamic hybrid MTS/MTO production systems2023
- Author(s)
  Shohei Kanda, Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  The 27th International Conference on Production Research
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] Sustainable and resilient closed-loop supply chain network design with disruptions2023
- Author(s)
  Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  The 27th International Conference on Production Research
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] Optimizing the configuration of labor-intensive production lines with the minimum number of workers2023
- Author(s)
  Katsumi Morikawa, Keisuke Nagasawa, Katsuhiko Takahashi
- Organizer
  The 27th International Conference on Production Research
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] Minimizing the number of operators with multi-skill levels in labor-intensive cells2023
- Author(s)
  Takayuki Kataoka, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  The 27th International Conference on Production Research
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] Robust and sustainable closed-loop supply chain network design for preventing unemployment at disruption2023
- Author(s)
  Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  The 23rd Asia Pacific Industrial Engineering and Management Systems
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] 動的MTS/MTOハイブリッドシステムにおけるマシン構成と多段階切替方式2023
- Author(s)
  神田翔平，長沢敬祐，森川克己，高橋勝彦
- Organizer
  日本経営工学会 2023年秋季大会
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] An optimal configuration and operation model for hybrid MTS/MTO production systems with multiple products and multiple machines2023
- Author(s)
  Ryusei Toshima, Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  The 27th International Conference on Production Research
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] An enhanced bucket brigade order picking system with a conveyor2023
- Author(s)
  Xin Zhou, Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi, Daisuke Hirotani
- Organizer
  The 2023 Asian Conference of Management Science & Applications
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] A multi-objective optimization model to minimize the total number of operators and total operation time in labour-intensive cells2023
- Author(s)
  Takayuki Kataoka, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  The 23rd Asia Pacific Industrial Engineering and Management Systems
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] Sugarcane supply chain network design with greenhouse gases and disposal2023
- Author(s)
  Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  The 2023 Asian Conference of Management Science & Applications
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] Scheduling mixed-model assembly lines with task sharing2022
- Author(s)
  Yuki Torigoe, Katsumi Morikawa, Keisuke Nagasawa, Katsuhiko Takahashi
- Organizer
  2022 Asia Pacific Industrial Engineering & Management Systems Conference
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] Balanced order batching in bucket brigade order picking systems with non-identical pickers2022
- Author(s)
  Xin Zhou, Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  2022 Asia Pacific Industrial Engineering & Management Systems Conference
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] An integrated mixed integer programming model to minimize the number of operators in labour-intensive cells2022
- Author(s)
  Takayuki Kataoka, Katsumi Morikawa and Katsuhiko Takahashi
- Organizer
  2022 Asia Pacific Industrial Engineering & Management Systems Conference
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] A new measure for considering both inventory level and waiting orders in MTS/MTO hybrid production systems2021
- Author(s)
  Daisuke Hirotani, Katsumi Morikawa, Keisuke Nagasawa, Katsuhiko Takahashi
- Organizer
  The 26th International Conference on Production Research
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] Scheduling and rescheduling in a job-shop-type remanufacturing system restoring customer-owned products2021
- Author(s)
  Takumi Otsuka, Katsumi Morikawa, Keisuke Nagasawa, Katsuhiko Takahashi
- Organizer
  The 26th International Conference on Production Research
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] Robust and sustainable workforce optimization in closed-loop supply chain network design2021
- Author(s)
  Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  The 26th International Conference on Production Research
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] ハイブリッドMTS/MTO生産システムに対する動的ロットサイジングによる生産方策2021
- Author(s)
  戸島隆晟，長沢敬祐，森川克己，高橋勝彦
- Organizer
  日本経営工学会2021年春季大会
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] Switching decision in hybrid MTS/MTO production system of multiple machines with setup2021
- Author(s)
  Yutaro Sato, Hiroyuki Maeda, Ryusei Toshima, Keisuke Nagasawa, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  The 26th International Conference on Production Research
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] Sustainable human resource simulation considering work elements, skills, learning and forgetting2021
- Author(s)
  Takayuki Kataoka, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  The 26th International Conference on Production Research
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02390
[Presentation] A dynamic switching policy with combined make-to-stock/make-to-order thresholds for hybrid production systems2016
- Author(s)
  Shohei Kanda, Katsuhiko Takahashi, Katsumi Morikawa, and Keisuke Nagasawa
- Organizer
  5th Computational Mathematics, Computational Geometry & Statistics(CMCGS 2016) & 4th Operations Research and Statistics (ORS 2016)
- Place of Presentation
  Singapore
- Year and Date
  2016-01-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25350446
[Presentation] 固定作業と作業スキルを考慮した臨時要員数最小化問題2016
- Author(s)
  片岡隆之，森川克己，高橋勝彦
- Organizer
  日本ロジスティクスシステム学会
- Place of Presentation
  広島県広島市（県立広島大学）
- Year and Date
  2016-06-04
- Data Source
  KAKENHI-PROJECT-26350442
[Presentation] Analysis of Y-shaped self-balancing production line with walk-back and travel time2015
- Author(s)
  Daisuke Hirotani, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  Asia Pacific Industrial Engineering & Management Systems Conference 2015
- Place of Presentation
  Ho Chi Minh, Vietnam
- Year and Date
  2015-12-08
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25350446
[Presentation] A dynamic switching rule of production line and production cell for hybrid production systems2015
- Author(s)
  Tasuku Tanaka, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  23rd International Conference on Production Research
- Place of Presentation
  Manila, Phiippines
- Year and Date
  2015-08-02
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25350446
[Presentation] 品種別寿命を考慮した倉庫容量制約付き多品目発注計画2014
- Author(s)
  片岡隆之，森川克己，高橋勝彦
- Organizer
  日本ロジスティクスシステム学会
- Place of Presentation
  早稲田大学（東京都）
- Year and Date
  2014-05-10
- Data Source
  KAKENHI-PROJECT-26350442
[Presentation] An adaptive cellular manufacturing system for producing two kinds of products in unreliable cells2013
- Author(s)
  ;Katsuhiko Takahashi, Kazunori Manago, Daisuke Hirotani and Katsumi Morikawa
- Organizer
  The 22th International Conference on Production Research
- Place of Presentation
  Iguassu falls, Brazil
- Data Source
  KAKENHI-PROJECT-25350446
[Presentation] Work policy for self-balancing production line with worker's learning2013
- Author(s)
  Daisuke Hirotani, Katsumi Morikawa and Katsuhiko Takahashi
- Organizer
  The 14th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2013)
- Place of Presentation
  Cebu, Philippines
- Data Source
  KAKENHI-PROJECT-25350446
[Presentation] 工程生産システムに対する生産計画の分担と調整2012
- Author(s)
  森川克己、高橋勝彦、広谷大助
- Organizer
  日本経営工学会平成 24 年度秋季研究発表大会
- Place of Presentation
  大阪工業大学
- Data Source
  KAKENHI-PROJECT-21310094
[Presentation] An Adaptive Kanban and Production Capacity Control Mechanism, International IFIP TC52012
- Author(s)
  L. L. Marand, Y. Sakata, D. Hirotani, K. Morikawa, and K. Takahashi
- Organizer
  WG 5.7 Conference on Advances in Production Management Systems (APMS 2012)
- Place of Presentation
  Rhodes, Greece
- Year and Date
  2012-09-26
- Data Source
  KAKENHI-PROJECT-22510151
[Presentation] 工程生産システムに対する生産計画の分担と調整2012
- Author(s)
  森川克己、高橋勝彦、広谷大助
- Organizer
  日本経営工学会平成24年度春季研究発表大会
- Place of Presentation
  法政大学
- Data Source
  KAKENHI-PROJECT-21310094
[Presentation] An Adaptive Kanban and Production Capacity Control Mechanism2012
- Author(s)
  Katsuhiko Takahashi
- Organizer
  International IFIP TC5, WG 5.7 Conference on Advances in Production Management Systems
- Place of Presentation
  Rhodes, Greece
- Data Source
  KAKENHI-PROJECT-22510151
[Presentation] ベイジアンネットワークを用いた要員配置計画の改善方策に関する研究2011
- Author(s)
  片岡隆之,花藤篤史,森川克己,高橋勝彦
- Organizer
  日本ロジスティクスシステム学会平成23年度第14回全国大会予稿集,pp.11-14
- Place of Presentation
  東京都(LEC大学)
- Year and Date
  2011-06-11
- Data Source
  KAKENHI-PROJECT-23710186
[Presentation] An inventory control policy with tracking information for dual-channel supply chains2011
- Author(s)
  H. Nagao, K. Takahashi, K. Morikawa, and D. Hirotani
- Organizer
  The 21st International Conference on Production Research
- Place of Presentation
  Stuttgart, Germany.
- Year and Date
  2011-08-04
- Data Source
  KAKENHI-PROJECT-22510151
[Presentation] ベイジアンネットワークを用いた要員配置計画の改善方策に関する研究2011
- Author(s)
  片岡隆之，花藤篤史，森川克己，高橋勝彦
- Organizer
  日本ロジスティクスシステム学会
- Place of Presentation
  LEC東京リーガルマインド大学（東京都）
- Data Source
  KAKENHI-PROJECT-23710186
[Presentation] An inventory control policy with tracking information for dual-channel supply chains2011
- Author(s)
  H.Nagao, K.Takahashi, K.Morikawa, D.Hirotani
- Organizer
  Proceeding of 21st International Conference on Production Research
- Place of Presentation
  シュツットガルト(ドイツ)
- Year and Date
  2011-08-03
- Data Source
  KAKENHI-PROJECT-22510151
[Presentation] A modified multi-agent system for simple assembly line balancing2010
- Author(s)
  K. Yokoyama, K. Morikawa, and K. Takahashi
- Organizer
  The 8th International Conference of Modeling and Simulation (MOSIM'10)
- Place of Presentation
  Hammamet, Tunisia.
- Year and Date
  2010-05-12
- Data Source
  KAKENHI-PROJECT-22510151
[Presentation] Quantifying the technology level of production system for technology transfer2010
- Author(s)
  K.Takahashi, K.Morikawa, 他
- Organizer
  The 11th Asia-Pacific Industrial Engineering & Management Systems Conference (APIEMS 2010)
- Place of Presentation
  Melaca, Malaysia
- Year and Date
  2010-12-09
- Data Source
  KAKENHI-PROJECT-22510151
[Presentation] Introducing a Common Component and Extending the Order Matching Rule in Make-to-Forecast Production2009
- Author(s)
  Katsumi Morikawa, Yusuke Deguchi, Katsuhiko Takahashi, Daisuke Hirotani
- Organizer
  The 10th Asia-Pacific Industrial Engineering & Management System Conference(APIEMS 2009)
- Place of Presentation
  Kitakyushu, Japan
- Year and Date
  2009-12-14
- Data Source
  KAKENHI-PROJECT-21310094
[Presentation] Introducing a Common Component and Extending the Order Matching Rule in Make-to-Forecast Production2009
- Author(s)
  Katsumi Morikawa, Yusuke,Deguchi, Katsuhiko Takahashi ,and Daisuke Hirotani
- Organizer
  The 10th Asia-Pacific Industrial Engineering & Management System Conference (APIEMS 2009)
- Place of Presentation
  Kitakyushu, Japan
- Year and Date
  2009-12-14
- Data Source
  KAKENHI-PROJECT-21310094
[Presentation] Mixed Component Commonality Strategy in Product Proliferation to Achieve Mass Customization2009
- Author(s)
  Yosi A.Hidayat, Katsuhiko Takahashi, Katsumi Morikawa, Kunihiro Hamada, Lucia Diawati, Andi Cakravastia
- Organizer
  The 20th National Conference of Australian Society for Operations Research & the 5thlnternational Intelligent Logistics System Conference
- Place of Presentation
  Gold Coast, Australia
- Year and Date
  2009-09-29
- Data Source
  KAKENHI-PROJECT-21310094
[Presentation] Mixed Component Commonality Strategy in Product Proliferation to Achieve Mass Customization2009
- Author(s)
  Yosi A. Hidayat, Katsuhiko Takahashi, Katsumi Morikawa, Kunihiro Hamada, Lucia Diawati and Andi Cakravastia
- Organizer
  he 20th National Conference of Australian Society for Operations Research & the 5thInternational Intelligent Logistics System Conference
- Place of Presentation
  Gold Coast, Australia
- Year and Date
  2009-09-29
- Data Source
  KAKENHI-PROJECT-21310094
[Presentation] An adaptive multi-agent system for stochastic assembly balancing2008
- Author(s)
  Kana Yokoyama, Katsumi Morikawa Katsuhiko Takahashi
- Organizer
  The Ninth Intemational Conference on Industrial Management
- Place of Presentation
  大阪
- Data Source
  KAKENHI-PROJECT-18510126
[Presentation] Partner selection with dynamic pricing under uncertainty condition in the global marketplace2008
- Author(s)
  Yosi, A. Hidayat, Katsuhiko Takahashi, Katsumi Morikawa, Kunihiro Hamada, Lucia Diawati, Andi Cakravastia
- Organizer
  Proceedings of the 9th Asia Pacific Industrial Engineering & Management System Conference
- Place of Presentation
  Bali, Indonesia
- Year and Date
  2008-12-03
- Data Source
  KAKENHI-PROJECT-17310100
[Presentation] プル型生産管理システムの教育用シミュレータ2008
- Author(s)
  森川克己, 高橋勝彦
- Organizer
  国際プロジェクト&プログラムマネジメント学会2008年4月春季研究発表大会予稿集
- Place of Presentation
  青山学院大学
- Year and Date
  2008-04-26
- Data Source
  KAKENHI-PROJECT-17310100
[Presentation] An adaptive multi-agent system for stochastic assembly balancing2008
- Author(s)
  K. Yokoyama, K. Morikawa, K. Takahashi
- Organizer
  The Ninth International Conference on Industrial Management
- Place of Presentation
  Osaka
- Data Source
  KAKENHI-PROJECT-18510126
[Presentation] PLM システムの展開,PLM システムを指向した実践研究,学会発表オーガナイズドセッション2 件2007
- Author(s)
  玉木欽也,渡辺一衛,高橋勝彦,研究部会メンバ
- Organizer
  日本経営工学会春季大会
- Data Source
  KAKENHI-PROJECT-17310100
[Presentation] Integrating lean and agile strategies into the production control system for mixed-model production line2007
- Author(s)
  K. Takahashi, K. Yokoyama, K. Morikawa
- Organizer
  International IFIP TC5, WG 5.7 Conference on Advances in Production Management Systems
- Place of Presentation
  Linkoping, Sweden
- Year and Date
  2007-09-18
- Data Source
  KAKENHI-PROJECT-18510126
[Presentation] Integrating lean and agile strategies into the production control system for mixed-model production line, International IFIP TC52007
- Author(s)
  K. Takahashi, K. Yokoyama, K. Morikawa
- Organizer
  WG 5.7 Conference on Advances in Production Management Systems
- Place of Presentation
  Linkoping, Sweden
- Year and Date
  2007-09-18
- Data Source
  KAKENHI-PROJECT-18510126
[Presentation] PLM システムの実践研究と教育開発,PLM の理論と実践研究,学会発表オーガナイズドセッション2 件2006
- Author(s)
  玉木欽也,渡辺一衛,高橋勝彦,越島一郎,研究部会メンバ
- Organizer
  日本経営工学会秋季大会
- Data Source
  KAKENHI-PROJECT-17310100
[Presentation] PLM の実践教育,PLM の動向と理論展開, 学会発表オーガナイズドセッション2006
- Author(s)
  玉木欽也,渡辺一衛,高橋勝彦,越島一郎,研究部会メンバ
- Organizer
  日本経営工学会春季大会
- Data Source
  KAKENHI-PROJECT-17310100
[Presentation] A flexible service rule for the dynamic MTS/MTO hybrid production system
- Author(s)
  Shohei Kanda, Katsuhiko Takahashi, and Katsumi Morikawa
- Organizer
  The 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC 2015)
- Place of Presentation
  Bali, Indonesia
- Year and Date
  2015-02-03 – 2015-02-06
- Data Source
  KAKENHI-PROJECT-25350446
[Presentation] Worker rearrangement policy using worker's position to decrease production loss for self-balancing production line with worker's learning
- Author(s)
  Daisuke Hirotani, Katsumi Morikawa, Katsuhiko Takahashi
- Organizer
  Asia Pacific Industrial Engineering & Management Systems Conference 2014
- Place of Presentation
  Jeju, Korea
- Year and Date
  2014-10-12 – 2014-10-15
- Data Source
  KAKENHI-PROJECT-25350446
[Presentation] Multi-step switching policy for dynamic pooling of make-to-stock and make-to-order operations
- Author(s)
  Shohei Kanda, Katsuhiko Takahashi, Katsumi Morikawa and Daisuke Hirotani
- Organizer
  The 18th International Symposium on Inventories (ISIR 2014)
- Place of Presentation
  Budapest, Hungary
- Year and Date
  2014-08-18 – 2014-08-22
- Data Source
  KAKENHI-PROJECT-25350446

1. MORIKAWA Katsumi (10200396)

# of Collaborated Projects: 10 results

# of Collaborated Products: 105 results
2. KATAOKA Takayuki (40411649)

# of Collaborated Projects: 5 results

# of Collaborated Products: 26 results
3. ISHI Nobuaki (40406426)

# of Collaborated Projects: 3 results

# of Collaborated Products: 1 results
4. YAGI Eiichiro (20257223)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
5. KOSHIJIMA Ichiro (30306394)

# of Collaborated Projects: 3 results

# of Collaborated Products: 3 results
6. HIROTANI Daisuke (30432686)

# of Collaborated Projects: 3 results

# of Collaborated Products: 22 results
7. TAMAKI Kinya (40188420)

# of Collaborated Projects: 2 results

# of Collaborated Products: 4 results
8. KOZAKAI Masakazsu (50337870)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
9. WATANABE Ichie (80175083)

# of Collaborated Projects: 2 results

# of Collaborated Products: 6 results
10. MATSUI Masayuki (00034413)

# of Collaborated Projects: 2 results

# of Collaborated Products: 2 results
11. YAMADA Tetsuo (90334581)

# of Collaborated Projects: 2 results

# of Collaborated Products: 3 results
12. ARAKAWA Masahiro (70288794)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
13. KAKEHI Munenori (00453655)

# of Collaborated Projects: 2 results

# of Collaborated Products: 3 results
14. KAMIGAKI Tamotsu (80261064)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
15. Nishizaki Ichiro (80231504)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
16. SUN Jing (20581010)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. PARK Y.w (90526485)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. TAKANOKURA Masato (00333534)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. NAKAMURA Nobuto (70016575)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. OHNO Katsuhisa (50026118)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. TAMAKI Mitsushi (40121876)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. TAMURA Takayoshi (70093101)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. JIN Zhihong (00324476)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. KOJIMA Mitsutoshi (20273310)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. NAKADE Koichi (50207825)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. 奥村誠 (00194514)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. 藤原章正 (50181409)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. 山田忠史 (80268317)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. 塚井誠人 (70304409)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. 岡村敏之 (90314781)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. 進藤昭夫 (60308830)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
32. 吉江修 (20200933)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
33. 濱田邦裕 (40294540)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. 北村充 (40195293)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
35. 安川宏紀 (40363022)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
36. 平田法隆 (80181163)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
37. 竹澤晃弘 (10452608)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
38. 藤久保昌彦 (30156848)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
39. MYRESHKA (40346523)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
40. 林田智弘 (20432685)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
41. 関崎真也 (70724897)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
42. 長沢敬祐 (50758159)

# of Collaborated Projects: 1 results

# of Collaborated Products: 20 results

Takahashi Katsuhiko 高橋 勝彦

TAKAHASHI Katsuhiko 高橋 勝彦

高橋 勝彦 タカハシ カツヒコ

Research Projects

Research Products

Co-Researchers

Development and evaluation of production management system for hybrid production systems to enhance sustainabilityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Agile Control Method for Adaptive Mixed Production Systems under Varied and Unstable Production EnvironmentsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Agile Control Method for Adaptive Production Systemsunder Unstable Production EnvironmentsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Agile Control for Reconfigurable Manufacturing System with Mass-customizationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Agile Control System for Reconfigurable Manufacturing SystemsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Takahashi Katsuhiko 高橋勝彦

TAKAHASHI Katsuhiko 高橋勝彦

高橋勝彦タカハシカツヒコ