HAGA Toshio 羽賀俊雄

Researcher Number	00212134
Other IDs
Affiliation *help	2005 – 2018 : Osaka Institute of Technology, Faculty of Engineering, Professor, 工学部, 教授 2005 : Osaka Institute of Technology, Department of Mechanical Engineering, Professor, 機械工学科, 教授 2004 : 大阪工業大学, 工学部, 助教授 2004 : 大阪工業大学, 工学部・機械工学科, 教授 2003 : Osaka Institute of Technology, Mechanical Engineering Dept, Associate Professor, 工学部・機械工学科, 助教授 2001 – 2002 : 大阪工業大学, 機械工学科, 助教授 1993 : School of Sci. and Eng.Assistant, 理工学部, 助手
Review Section/Research Field	Principal Investigator Metal making engineering / Material processing/treatments / Recycling engineering / Environmental conscious materials and recycle / Environmental technology/Environmental materials Except Principal Investigator Production engineering/Processing studies / 金属加工(含鋳造) / 機械工作・生産工学 / Metal making/Resorce production engineering
Keywords	Principal Investigator 双ロールキャスター / リサイクル / アルミニウム合金 / ロールキャスティング / 薄板 / 急冷凝固 / 積層材 / AM60 / AZ91 / 無害化 … More Except Principal Investigator twin roll caster / semi-solid / strip casting / magnesium alloys / 急冷凝固 / solidification modeling / high aluminum contents / capacitance method / magnesium alloy / different speed rolling / cooling slope / 複合材 / メルトスピニング法 / ダイカスト / 高強度マグネシウム合金 / 冷却速度 / 箔 / 急冷紛末 / 単ロ-ル法 / Cooling Rate / semisolid / クラッド箔 / 急冷凝固法 / 高濃度アルミミニウム含有マグネシウム合金 / 材料加工 / ヒートシンク / 半凝固 / ラミネ-ト材 / PFC法 / electronic vibration / Rotating Drum / 高濃度アルミニウム含有マグネシウム合金 / Rapid Solidification / 鋳造 / Clad / 急冷箔帯 / アトマイズ法 / 双ロールキャスティング / Laminate / スプレーフォーミング / 熱間鍛造 / defferent speed rolling / オスプレー法 / Single Roll / クラッド材 / 積層材 / electric vibration / 急冷凝固箔 / meld drag twin roll caster / electricvibration / roll-forming / 連続鋳造 / 溶融加工 / 単ロール法 / 回転ドラム法 / Rotating Disk / Foil / solidification / 回転ディスク法 / 鍛造 / 薄肉ダイカスト / 双ロール法 / structural refinement Less

低品位リサイクルアルミの革新的アップグレード技術の創製Principal InvestigatorOngoing
- Principal Investigator
  
  羽賀俊雄
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Environmental conscious materials and recycle
- Research Institution
  Osaka Institute of Technology
急冷凝固法による高強度マグネシウム合金材料の創製と熱間鍛造性Ongoing
- Principal Investigator
  
  渡利久規
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Metal making/Resorce production engineering
- Research Institution
  Tokyo Denki University
Creation of the super escalope Al heat sink using the innovative half solidification die-casting method to support an electric car
- Principal Investigator
  
  FUSE HIROSHI
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka Institute of Technology
Development of upgrade recycle method by process savingPrincipal Investigator
- Principal Investigator
  
  HAGA Toshio
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Environmental technology/Environmental materials
- Research Institution
  Osaka Institute of Technology
Same level recycle of aluminum alloy body sheet for automobile by a high speed twin roll casterPrincipal Investigator
- Principal Investigator
  
  HAGA Toshio
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Recycling engineering
- Research Institution
  Osaka Institute of Technology
Innovative recycle of body sheet for a automobile by a twin roll casterPrincipal Investigator
- Principal Investigator
  
  HAGA Toshio
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Metal making engineering
- Research Institution
  Osaka Institute of Technology
Casting of thin magnesium strip using a high-speed-semisolid-roll-casting and its mechanical propertiesPrincipal Investigator
- Principal Investigator
  
  HAGA Toshio
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Osaka Institute of Technology
High Speed Production Process of Magnesium Alloy Sheets using electric vibration and different speed rolling
- Principal Investigator
  
  WATARI Hisaki
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Oyama National College of Technology
High speed production method of wrought magnesium alloy sheets using semi-solid twin roll strip casting and its plastic characteristics in warm deep drawing
- Principal Investigator
  
  IZAWA Satoru
- Project Period (FY)
  2001 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Oyama National College of Technology
Manufacturing and property of Rapidly Solidified
- Principal Investigator
  
  MOTOMURA Mitsugu
- Project Period (FY)
  1991 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  Waseda Univ.

All 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2006 Other

All Journal Article Presentation

[Journal Article] Casting of Clad Strip of Al-SiCp, Magnesium Alloy Hard-Brittle Light Material by a Twin Roll Caster2017
- Author(s)
  Toshio Haga, Kentaro Okamura, Hisaki Watari and Shinichi Nishida
- Journal Title
  
  Materials Science Forum
  
  Volume : 893 Pages : 262-266
- Peer Reviewed / Open Access / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K06522
[Journal Article] Casting of an Mg Alloy Clad Strip Using a Twin Roll Caster Equipped with a Scraper2017
- Author(s)
  Toshio Haga
- Journal Title
  
  Materials Science Forum
  
  Volume : 879 Pages : 671-676
- DOI
  10.4028/www.scientific.net/MSF.879.671
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K00607
[Journal Article] Direct Cladding from Molten Metals of Aluminum and Magnesium Alloys using a Tandem Horizontal Twin Roll Caster2015
- Author(s)
  Hideto Harada, Shin-ichi Nishida, Mayumi Suzuki, Hisaki Watari, Toshio Haga
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume : 772 Pages : 250-256
- Peer Reviewed / Open Access / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K06522
[Journal Article] Casting of clad strip by a vertical type twin roll caster2015
- Author(s)
  Toshio Haga, Hisaki Watari
- Journal Title
  
  Manufacturing Science and Technology
  
  Volume : ３ Pages : 197-203
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K00607
[Journal Article] Roll casting of a clad strip consisting of 5182 aluminum alloy2015
- Author(s)
  Toshio Haga
- Journal Title
  
  Journal of Achievements in Materials and Manufacturing Engineerin
  
  Volume : ７３ Pages : 33-43
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K00607
[Journal Article] Casting of Clad Strip by a Twin Roll Caster2014
- Author(s)
  Toshio Haga
- Journal Title
  
  Materials Science Forum
  
  Volume : 794-796 Pages : 772-777
- DOI
  10.4028/www.scientific.net/MSF.794-796.772
- Peer Reviewed / Open Access / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24510107
[Journal Article] A vertical type tandem twin roll caster for clad strip equipped with a scraper2014
- Author(s)
  Toshio Haga
- Journal Title
  
  Key Engineering Materials
  
  Volume : 611-612 Pages : 623-628
- DOI
  10.4028/www.scientific.net/KEM.611-612.623
- Peer Reviewed / Open Access / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24510107
[Journal Article] A vertical type tandem twin roll caster for clad strip equipped with a scraper2014
- Author(s)
  Toshio Haga
- Journal Title
  
  Key Engineering Materials
  
  Volume : 611-612 Pages : 623-628
- DOI
  10.4028/www.Scientific.net/KEM.611-612.623
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24510107
[Journal Article] A vertical type twin roll caster for an aluminum alloy clad strip2013
- Author(s)
  Toshio Haga
- Journal Title
  
  Joumal of Achievements in Materials and Manufacturing Engineering,
  
  Volume : 62 Pages : 36-44
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24510107
[Journal Article] A vertical type twin roll caster for an aluminum alloy clad strip2013
- Author(s)
  T.Haga, R.Nakamura, S.Kumai, H.Watari
- Journal Title
  
  Achives of Materials Science and Engineering
  
  Volume : 62 Pages : 36-34
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24510107
[Journal Article] Roll casting of recycled AA51822012
- Author(s)
  T. Haga
- Journal Title
  
  Advanced Materials Research
  
  Volume : Vol.121-126 Pages : 4667-4670
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560853
[Journal Article] Strip casting of 6061 and recycled 6061 alloy by an unequal diameter twin roll caster2011
- Author(s)
  T. Haga, H. Inui, R. Nakamura
- Journal Title
  
  Advanced Materials Research
  
  Volume : Vol.264-265 Pages : 1911-1916
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560853
[Journal Article] High speed twin roll casting of Al-Mg alloys2011
- Author(s)
  K. Komeda, T. Haga, S. Kumai
- Journal Title
  
  Advanced Materials Research
  
  Volume : Vol.154-155 Pages : 1544-1548
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560853
[Journal Article] Casting of Al-25% strip using a vertical type twin roll caster2011
- Author(s)
  T. Haga, H. Harada
- Journal Title
  
  Advanced Materials Research
  
  Volume : Vol.239-242 Pages : 1944-1947
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] Roll casting of aluminum alloy clad strip2017
- Author(s)
  Toshio Haga
- Organizer
  International Conference on Developments in Engineering and Technology
- Place of Presentation
  Hotel Mercure Bangkok Siam, Bankok, Thailand
- Year and Date
  2017-02-07
- Int'l Joint Research / Invited
- Data Source
  KAKENHI-PROJECT-15K00607
[Presentation] Development of hot forging process high aluminum content magnesium alloys manufactured by horizontal twin-roll casting2016
- Author(s)
  Tomohiro Kishi, Takafumi Ishikawa, Hisaki Watari,Toshio Haga and Masahiro Tsukamoto
- Organizer
  The 5th Conference of the Combined Australian Materials Societies (CAMS 2016)
- Place of Presentation
  Melbourne(Australia)
- Year and Date
  2016-12-06
- Int'l Joint Research / Invited
- Data Source
  KAKENHI-PROJECT-15K06522
[Presentation] Roll casting of clad strips using a twin roll caster2016
- Author(s)
  Toshio Haga
- Organizer
  The 9th Pacific Rim International Conference on Advanced Materials and Processing（PRICM9）
- Place of Presentation
  Kyoto International Conference Center, Kyoto, Japan
- Year and Date
  2016-08-04
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K00607
[Presentation] Innovation of a roll caster for aluminum alloy2016
- Author(s)
  Toshio Haga
- Organizer
  72nd World Foundry Congress
- Place of Presentation
  Nagoya Congress Center, Nagoya, Japan
- Year and Date
  2016-05-24
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K00607
[Presentation] Evaluation of Friction Properties of Magnesium Alloy during Hot Forging by Ring Compression Test2016
- Author(s)
  Sueji Hirawatari1, Hisaki Watari, Shinichi Nishida1,Yuki Sato, Mayumi Suzuki, Toshio Haga
- Organizer
  2016 5th International Conference on Engineering and Innovative Materials( ICEIM 2016)
- Place of Presentation
  Kuala Lumpur（Malaysia）
- Year and Date
  2016-09-10
- Int'l Joint Research / Invited
- Data Source
  KAKENHI-PROJECT-15K06522
[Presentation] Hot forging behavior of high aluminum content magnesium alloys manufactured by horizontal twin-roll caster2016
- Author(s)
  Tomohiro Kishi, Takafumi Ishikawa, Hisaki Watari,Toshio Haga and Masahiro
- Organizer
  Advances in Materials & Processing Technologies Conference(AMPT2016)
- Place of Presentation
  Kuala Lumpur（Malaysia）
- Year and Date
  2016-11-08
- Int'l Joint Research / Invited
- Data Source
  KAKENHI-PROJECT-15K06522
[Presentation] 双ロールキャスターによるクラッド材の作製2015
- Author(s)
  羽賀俊雄
- Organizer
  軽金属学会第124回春期講演大会
- Place of Presentation
  東北大学
- Year and Date
  2015-05-17
- Data Source
  KAKENHI-PROJECT-24510107
[Presentation] 双ロールキャスターによるクラッド材の作製2013
- Author(s)
  羽賀俊雄
- Organizer
  一般社団法人軽金属学会
- Place of Presentation
  富山大学（富山県）
- Data Source
  KAKENHI-PROJECT-24510107
[Presentation] 双ロールキャスターによるクラッド材の作製2013
- Author(s)
  羽賀俊雄
- Organizer
  軽金属学会第124回春期講演大会
- Place of Presentation
  富山大学
- Year and Date
  2013-05-19
- Data Source
  KAKENHI-PROJECT-24510107
[Presentation] 直径1000mmの縦型双ロールキャスターによるアルミニウム合金板の作製2011
- Author(s)
  羽賀俊雄
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  ホテル日航豊橋
- Year and Date
  2011-10-28
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] Strip Casting of the Recycled Aluminum Alloys2011
- Author(s)
  T. Haga
- Organizer
  International Symposium on Materials Science and Innovation for Sustainable Society(ECO-MATES2011)
- Place of Presentation
  Osaka University
- Year and Date
  2011-11-30
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] Casting of aluminum alloy clad strip using a roll caster2011
- Author(s)
  T. Haga
- Organizer
  JSME/ASME2011 International conference on materials & processing
- Place of Presentation
  Oregon State University, USA
- Year and Date
  2011-06-14
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] Roll casting of aluminum alloy strip by a single roll caster equipped with a scraper2011
- Author(s)
  T. Haga
- Organizer
  International conference on advances in materials & processing technologies AMPT2011
- Place of Presentation
  Istanbul convention center Turkey
- Year and Date
  2011-07-15
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] Strip casting using a single roll caster equipped with a scraper2011
- Author(s)
  T. Haga
- Organizer
  Aluminium sience and Technology ECAA2011
- Place of Presentation
  Bremen convention center Germany
- Year and Date
  2011-10-06
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] リサイクルアルミニウム合金のロールキャスティング2011
- Author(s)
  羽賀俊雄
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  ホテル日航豊橋
- Year and Date
  2011-10-28
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] Strip Casting of the Recycled Aluminum Alloys2011
- Author(s)
  羽賀俊雄
- Organizer
  International Symposium on Materials Science and Innovation for Sustainable Society (ECO-MTES2011)
- Place of Presentation
  大阪大学
- Year and Date
  2011-11-30
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] 直径1000mmの縦型双ロールキャスターによるアルミニウム合金板の作製2011
- Author(s)
  羽賀俊雄
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  ホテル日航豊橋
- Year and Date
  2011-11-18
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] リサイクルアルミニウム合金のロールキャスティング2011
- Author(s)
  羽賀俊雄
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  ホテル日航豊橋
- Year and Date
  2011-11-18
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] Casting of aluminum alloy clad strip using a roll caster2011
- Author(s)
  羽賀俊雄
- Organizer
  JSME/ASME2011 International conference on materials & processing
- Place of Presentation
  アメリカオレゴン州立大学
- Year and Date
  2011-06-14
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] Roll casting of aluminum alloy strip by a single roll caster equipped with a scraper2011
- Author(s)
  羽賀俊雄
- Organizer
  International conference on advances in materials & processing technologies AMPT2011
- Place of Presentation
  トルコイスタンブールコンベンションセンター
- Year and Date
  2011-07-15
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] Strip casting using a single roll caster equipped with a scraper2011
- Author(s)
  羽賀俊雄
- Organizer
  Aluminium sience and Technology ECAA2011
- Place of Presentation
  ドイツブレーメンコンベンションセンター
- Year and Date
  2011-10-06
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] 5182合金の双ロールキャスティングにおける欠陥の改善2010
- Author(s)
  羽賀俊雄
- Organizer
  軽金118回春期大会
- Place of Presentation
  関西大学
- Year and Date
  2010-05-23
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] 縦型高速双ロールキャスターによる5182のリサイクル材を使用した薄板作製2010
- Author(s)
  米田康祐, 羽賀俊雄
- Organizer
  塑性加工学会春季講演会
- Place of Presentation
  電気通信大学
- Year and Date
  2010-05-30
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] 縦Φ1000型高速双ロールキャスターによる6000系合金薄板の作製2010
- Author(s)
  羽賀俊雄
- Organizer
  軽金119回秋期大会
- Place of Presentation
  長岡技術科学大学
- Year and Date
  2010-11-14
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] 縦型高速双ロールキャスターによる5182合金薄板作製における巣の改善2010
- Author(s)
  羽賀俊雄
- Organizer
  日本機械学会第18回機械材料・材料加工技術講演会(M & P2010)
- Place of Presentation
  東京大学
- Year and Date
  2010-11-27
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] 直径1000mmロールを用いた縦型高速双ロールキャスターの試作2010
- Author(s)
  羽賀俊雄
- Organizer
  日本機械学会第18回機械材料・材料加工技術講演会(M & P2010)
- Place of Presentation
  東京大学
- Year and Date
  2010-11-27
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] 縦型高速双ロールキャスターによるリサイクルAl合金薄板の作製2009
- Author(s)
  羽賀俊雄
- Organizer
  軽金117回秋期大会
- Place of Presentation
  電気通信大学
- Year and Date
  2009-11-14
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] 高速双ロールキャスターによるリサイクル5182合金薄板の作製2009
- Author(s)
  羽賀俊雄
- Organizer
  日本機械学会第18回機械材料・材料加工技術講演会(M & P2009)
- Place of Presentation
  富山国際会議場
- Year and Date
  2009-11-06
- Data Source
  KAKENHI-PROJECT-21560853
[Presentation] 高速双ロールキャスティングにおける鋳造条件の影響2008
- Author(s)
  羽賀俊雄,熊井真次,渡利久規
- Organizer
  軽金属学会第114回講演会
- Place of Presentation
  愛媛
- Year and Date
  2008-05-11
- Data Source
  KAKENHI-PROJECT-18560717
[Presentation] Grooved roll for a high speed twin roll caster2008
- Author(s)
  T.Haga,S.Kumai
- Organizer
  Achievements on Mechanical and Material Engineering
- Place of Presentation
  Ryn Poland
- Year and Date
  2008-07-23
- Data Source
  KAKENHI-PROJECT-18560717
[Presentation] High speed twin roll casting of 6061 alloy strips2008
- Author(s)
  T.Haga,S.Kumai
- Organizer
  Achievements on Mechanical and Material Engineering
- Place of Presentation
  Ryn Poland
- Year and Date
  2008-07-23
- Data Source
  KAKENHI-PROJECT-18560717
[Presentation] Strip casting by a vertical type high speed twin roll caster2008
- Author(s)
  T.Haga,S.Kumai
- Organizer
  The 11th International Conference on Aluminum Alloys
- Place of Presentation
  Achen, Germany
- Year and Date
  2008-09-23
- Data Source
  KAKENHI-PROJECT-18560717
[Presentation] 1500mm双ロールキャスターによるA6016合金板の作製2006
- Author(s)
  羽賀俊雄,阪口洋,乾秀喜,熊井真次,鈴木健太,渡利久規
- Organizer
  軽金属学会110回講演会
- Place of Presentation
  北九州
- Year and Date
  2006-05-14
- Data Source
  KAKENHI-PROJECT-18560717
[Presentation] 1500mm双ロールキャスターによる6000系アルミニウム合金板の作製2006
- Author(s)
  羽賀俊雄,阪口洋,乾秀喜,熊井真次,鈴木健太,渡利久規
- Organizer
  軽金属学会第111回講演会
- Place of Presentation
  東京
- Year and Date
  2006-11-19
- Data Source
  KAKENHI-PROJECT-18560717
[Presentation] 異径双ロールキャスタによる不純物を添加したアルミニウム合金のストリップキャスティング2006
- Author(s)
  羽賀俊雄,阪口洋,乾秀喜,熊井真次,鈴木健太,渡利久規
- Organizer
  鋳造工学会第148回講演会
- Place of Presentation
  大阪
- Year and Date
  2006-05-21
- Data Source
  KAKENHI-PROJECT-18560717
[Presentation] Development of Vertical-Type High-Speed Twin Roll Caster and its Application to Aluminum Alloy Products2006
- Author(s)
  T.Haga,S.Kumai
- Organizer
  軽金属学回第111回講演会
- Place of Presentation
  東京
- Year and Date
  2006-11-19
- Data Source
  KAKENHI-PROJECT-18560717
[Presentation] 双ロールキャスターによるクラッド材の作製
- Author(s)
  羽賀俊雄
- Organizer
  軽金属学会
- Place of Presentation
  東北大学青葉キャンパス
- Year and Date
  2015-05-16 – 2015-05-17
- Data Source
  KAKENHI-PROJECT-24510107

1. WATARI Hisaki (90210971)

# of Collaborated Projects : 3results

# of Collaborated Products : 5results
2. IZAWA Satoru (00232223)

# of Collaborated Projects : 2results

# of Collaborated Products : 0results
3. YAMAZAKI Takanori (80342476)

# of Collaborated Projects : 2results

# of Collaborated Products : 0results
4. HAMANO Hidemitsu

# of Collaborated Projects : 2results

# of Collaborated Products : 0results
5. FUSE HIROSHI (70726778)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
6. MOTOMURA Mitsugu (10063736)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
7. OHASHI Takahiro (80277821)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
8. 鈴木真由美 (20292245)

# of Collaborated Projects : 1results

# of Collaborated Products : 2results

HAGA Toshio 羽賀 俊雄

Research Projects

Research Products

Co-Researchers

低品位リサイクルアルミの革新的アップグレード技術の創製Principal InvestigatorOngoing

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

急冷凝固法による高強度マグネシウム合金材料の創製と熱間鍛造性Ongoing

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Creation of the super escalope Al heat sink using the innovative half solidification die-casting method to support an electric car

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of upgrade recycle method by process savingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Same level recycle of aluminum alloy body sheet for automobile by a high speed twin roll casterPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Innovative recycle of body sheet for a automobile by a twin roll casterPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Casting of thin magnesium strip using a high-speed-semisolid-roll-casting and its mechanical propertiesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

High Speed Production Process of Magnesium Alloy Sheets using electric vibration and different speed rolling

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

High speed production method of wrought magnesium alloy sheets using semi-solid twin roll strip casting and its plastic characteristics in warm deep drawing

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Manufacturing and property of Rapidly Solidified

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Casting of Clad Strip of Al-SiCp, Magnesium Alloy Hard-Brittle Light Material by a Twin Roll Caster2017

Author(s)

Journal Title

Data Source

[Journal Article] Casting of an Mg Alloy Clad Strip Using a Twin Roll Caster Equipped with a Scraper2017

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Direct Cladding from Molten Metals of Aluminum and Magnesium Alloys using a Tandem Horizontal Twin Roll Caster2015

Author(s)

Journal Title

Data Source

[Journal Article] Casting of clad strip by a vertical type twin roll caster2015

Author(s)

Journal Title

HAGA Toshio 羽賀俊雄