Morimoto Yoshitaka 森本喜隆

… Alternative Names

MORIMOTO Yoshitaka 森本喜隆

森本義隆モリモトヨシタカ

Less

Researcher Number	00290734
Other IDs	https://orcid.org/0000-0002-8400-8741
Affiliation (Current)	2024: 金沢工業大学, 工学部, 教授
Affiliation (based on the past Project Information) *help	2024: 金沢工業大学, 工学部, 教授 2011 – 2022: 金沢工業大学, 工学部, 教授 2001 – 2003: 宇都宮大学, 工学部, 助教授
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related Except Principal Investigator Basic Section 18020:Manufacturing and production engineering-related / Production engineering/Processing studies / 機械工作・生産工学
Keywords	Principal Investigator 非円形加工 / 工作機械 / CNC旋盤 / 軸心位置制御 / 電磁力 / 軌跡制御 / 外乱オブザーバ / 章動運動 / 歳差運動 / 主軸 … More / 駆動型ロータリー工具 / 慣性力抑制 / CFRP製テーブル / 5軸同期制御 / ロータリー工具 / 繰返し制御 / ３次元曲面 / 機械工作・生産工学 / 振動制御 / 駆動形ロータリ工具 / リニアモータ駆動 / 三次元曲面 / ラインレーザーセンサ / 繰り返し誤差補償 / 同期制御 / 焼入れ鋼 / 旋削加工 / 磁気研磨 / 機上測定 / 駆動形ロータリー工具 / 国際情報交換 / Linear motor / High acceleration / CNC lathe / Non-axisyimmetric turnig / CAM … More Except Principal Investigator ニオブチタン合金 / 微細加工 / 高能率加工 / 合金組織 / 難加工性 / 低弾性率 / ダイヤモンド工具 / ハイブリッド加工 / ヘール仕上げ / 駆動型ロータリ加工 / スラント型回転軸 / 非直交回転軸 / ５軸工作機械 / 加工スペース / 運動学 / 5軸工作機械 / 多軸工作機械 / 形状創成理論 / インプラント / 高能率化 / ロータリーヘール加工 / チタニウム合金 / 切削機構 / ヘール加工 / 駆動型ロータリー工具 / 生体適合性 / バインダレスナノダイヤモンド焼結体 / レーザー刃先処理 / Grinding Performance / Surface Roughness / Grinding Force / Grinding ratio / Fracture Strength / CBN Grinding Wheel / Direct Transformation / New Polycrystalline CBN Abrasive / 研削加工 / ナノ結晶体 / cBN砥粒 / 研削性能 / 仕上面粗さ / 研削抵抗 / 研削比 / 破壊強度 / CBNホイール / 直接転換法 / ナノ結晶体CBN / 超弾塑性β型チタニウム合金材料 / 表面変質層 / 人工歯根 / 超弾塑性β型チタニウム合金 / クラックレス / ポリ乳酸 / 切削工具 / ナノ構造 / 高純度cBN Less

骨に近いニオブチタン合金を対象としたハイブリッド型ロータリヘール加工技術の構築
- Principal Investigator
  
  加藤秀治
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa Institute of Technology
Development of highly efficient machining technology for niobium-titanium alloys with low elastic modulus similar to bone
- Principal Investigator
  
  Kato Hideharu
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa Institute of Technology
Development of structure analysis simulator for multi-axis machine tool and efficient structure optimization
- Principal Investigator
  
  Takasugi Keigo
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa University
Creation of non-circular and non-axisymmetric inner cylinder machining method by controlling the axis' center position of the machine tool spindlePrincipal Investigator
- Principal Investigator
  
  Morimoto Yoshitaka
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa Institute of Technology
Construction of microfabrication technology for niobium titanium alloy with low elastic modulus similar to bone
- Principal Investigator
  
  Kato Hideharu
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kanazawa Institute of Technology
Development of Turning and Polishing System for Non-axisymmetric 3D surfacesPrincipal Investigator
- Principal Investigator
  
  Morimoto Yoshitaka
- Project Period (FY)
  2015 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kanazawa Institute of Technology
Construction of the micro milling of super elasto-plastic beta type titanium alloy which has a young's modulus near bone
- Principal Investigator
  
  Kato Hideharu
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kanazawa Institute of Technology
Realization of 3D surface machining by turningPrincipal Investigator
- Principal Investigator
  
  MORIMOTO Yoshitaka
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kanazawa Institute of Technology
Construction of the crack-less maicro-cutting technology of the biodegradable polylactic acid material used for a medical-application fixture
- Principal Investigator
  
  KATO HIDEHARU
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kanazawa Institute of Technology
ナノ構造立方晶窒化ほう素の高圧合成と超精密切削用工具の試作
- Principal Investigator
  
  ICHIDA Yoshio
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  機械工作・生産工学
- Research Institution
  Utsunomiya University
The development of Nanocrystalline cBN Abrasives and Their Application to Grinding
- Principal Investigator
  
  ICHIDA Yoshio
- Project Period (FY)
  2001 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Utsunomiya University

All 2022 2021 2019 2018 2017 2016 2015 2014 2013 2012 2011 Other

All Journal Article Presentation Patent

[Journal Article] Development of Desktop CNC Lathe with Pipe Frame Structure2019
- Author(s)
  鈴木直彦，森本喜隆，金子義幸，廣崎憲一，岡﨑祐一
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 85 Issue: 2 Pages: 189-196
- DOI
  10.2493/jjspe.85.189
- NAID
  130007590764
- ISSN
  0912-0289, 1882-675X
- Year and Date
  2019-02-05
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H03905
[Journal Article] A Study on Positioning Control of a Moving Table by Real-Time Identification of Dynamic Characteristics2019
- Author(s)
  森本喜隆，熊谷恵介，向井達也，林晃生
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 85 Issue: 1 Pages: 113-118
- DOI
  10.2493/jjspe.85.113
- NAID
  130007542959
- ISSN
  0912-0289, 1882-675X
- Year and Date
  2019-01-05
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H03905
[Journal Article] Improvement of machining accuracy for 3D surface machining with CNC lathe2018
- Author(s)
  Keigo Takasugi, Yoshitaka Morimoto, Yoshiyuki Kaneko, Naohiko Suzuki，Naoki Asakawa
- Journal Title
  
  JAMDSM
  
  Volume: 12 Issue: 4 Pages: JAMDSM0089-JAMDSM0089
- DOI
  10.1299/jamdsm.2018jamdsm0089
- NAID
  130007458214
- ISSN
  1881-3054
- Language
  English
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03905
[Journal Article] Development of Four-Axis 3D Printer with Fused Deposition Modeling Technology2017
- Author(s)
  Kyosuke Kawagishi, Shoma Umetani, Ken Tanaka, Eiji Ametani, Yoshitaka Morimoto, and Keigo Takasugi
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 11 Issue: 2 Pages: 278-286
- DOI
  10.20965/ijat.2017.p0278
- NAID
  130007505970
- ISSN
  1881-7629, 1883-8022
- Year and Date
  2017-03-05
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H03905
[Journal Article] Thermal Deformation Control of a Pipe Structure Frame CNC lathe2017
- Author(s)
  鈴木直彦、森本喜隆、金子義幸、廣崎憲一、岡崎祐一
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 83 Issue: 5 Pages: 453-459
- DOI
  10.2493/jjspe.83.453
- NAID
  130005645830
- ISSN
  0912-0289, 1882-675X
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H03905
[Journal Article] Development of a CNC lathe with tandem moving table for high speed turning (Evaluation of high-speed motion and effect of vibration transmission suppression)2015
- Author(s)
  森本喜隆，高杉敬吾，吉村史也，長谷川陽，鈴木　直彦，金子義幸
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 81 Issue: 832 Pages: 15-00290-15-00290
- DOI
  10.1299/transjsme.15-00290
- NAID
  130005118090
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-15H03905
[Journal Article] Study on High-Efficiency Finish Turning of Carbunized Hardened Steel with Driven Rotary Cuttig2014
- Author(s)
  Hideharu Kato, Yoshirtaka Morimoto
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 7-3 Pages: 321-328
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] 光学部品用金型加工向け超精密5軸加工機の開発2014
- Author(s)
  廣瀬智博，森本喜隆
- Journal Title
  
  精密工学会誌
  
  Volume: 80，2 Pages: 177-182
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] 旋削加工による三次元曲面の創製2013
- Author(s)
  森本喜隆
- Journal Title
  
  日本機械学会論文集
  
  Volume: 79-804 Pages: 276-288
- NAID
  130005031958
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] Study on High-Efficiency Finish Turning of Carburized Hardened Steel with Driven Rotary Cutting2013
- Author(s)
  Hideharu KATO, Yoshitaka MORIMOTO
- Journal Title
  
  Int. J. of Automation Technology
  
  Volume: Vol.7, No.3
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] Machining of Non- axisymmetric Curved Surface by Lathe Turning2013
- Author(s)
  Yoshitaka MORIMOTO, Katsuhiro Nakagaki, Hideharu KATO
- Journal Title
  
  Proceedings of 2013 ASME IMECE, IMECE2013-63317
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] 旋削加工による三次元曲面の創製(ロータリ工具を用いた旋削加工法の提案)2013
- Author(s)
  森本喜隆,加藤秀治,榎本宗一郎,森山貴幸他
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: Vol.79, No.804 Pages: 276-288
- NAID
  130003375161
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] Machining of Non-axisymmetric Curved Surface by Lathe Turning2013
- Author(s)
  Yoshitaka Morimoto
- Journal Title
  
  Proceedings of 2013 ASME IMECE
  
  Volume: IMECE2013-63317 Pages: 1-7
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] Accuracy Evaluation of 5-axis Machining Center Based on Measurement Results of Machined Workpiece2012
- Author(s)
  Y. MORIMOTO, K. Nakato, M.Gontani
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 6 Pages: 675-681
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] Creation of Curved Surface by Lathe Turning2012
- Author(s)
  Y. Morimoto, S. Emoto, T. Moriyama, H. Katoa, K. Nakagakib, N. Suzukib, Y. Kanekob, M. Isobeb
- Journal Title
  
  Procedia CIRP
  
  Volume: 1 Pages: 114-119
- DOI
  10.1016/j.procir.2012.04.018
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] Vibration Control of CNC Lathe with Pipe Structure Frame2012
- Author(s)
  森本喜隆，鈴木直彦，金子義幸，磯部稔，廣崎憲一，岡崎祐一
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 78 Issue: 5 Pages: 420-425
- DOI
  10.2493/jjspe.78.420
- NAID
  130002122254
- ISSN
  0912-0289, 1882-675X
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] Creation of Curved Surface by Lathe Turning2012
- Author(s)
  Yoshitaka MORIMOTO, Katsuhiro Nakagaki, Hideharu KATO
- Journal Title
  
  Procedia CIRP
  
  Volume: Vol.1 Pages: 114-119
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] Development of linear- motor-driven NC table for high-speed Machining of 3d Surface by Lathe Turning2012
- Author(s)
  Yoshitaka MORIMOTO, Katsuhiro Nakagaki, Hideharu KATO
- Journal Title
  
  Procedia CIRP
  
  Volume: Vol.1 Pages: 271-276
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] Development of Linear-Motor-Driven Nc Table for High-Speed Machining of 3d Surface by Lathe Turning2012
- Author(s)
  Y. Morimoto, T. Moriyama, S. Emoto, H. Saito, K. Nakagaki, Y. Kaneko., M. Isobe
- Journal Title
  
  Procedia CIRP
  
  Volume: 1 Pages: 271-276
- DOI
  10.1016/j.procir.2012.04.049
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] Study on Accuracy Evaluation of Machining Center Based on Measurement Results of Machined Workpiece2011
- Author(s)
  Yoshitaka Morimoto, Keisuke Nakato, Motoshi Gontani
- Journal Title
  
  Proceedings of the LEM21 International Conference on Leading Edge Manufacturing in 21st Century
  
  Volume: 1 Pages: 3311-3311
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Journal Article] Positioning performance of moving table with reducer unitPositioning performance of moving table with reducer unit2011
- Author(s)
  Yoshitaka Morimoto
- Journal Title
  
  SICE Annual Conference 2011
  
  Volume: PR0001/11 Pages: 417-422
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560139
[Patent] ＮＣ旋盤及びこれを用いた切削加工方法2017
- Inventor(s)
  森本喜隆
- Industrial Property Rights Holder
  森本喜隆
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2017-024453
- Filing Date
  2017-02-13
- Data Source
  KAKENHI-PROJECT-15H03905
[Patent] 旋削による非円形加工方法2013
- Inventor(s)
  森本喜隆
- Industrial Property Rights Holder
  森本喜隆
- Industrial Property Rights Type
  特許
- Acquisition Date
  2013-11-22
- Overseas
- Data Source
  KAKENHI-PROJECT-23560139
[Patent] 工作機械の加工制御方法2013
- Inventor(s)
  森本喜隆
- Industrial Property Rights Holder
  森本喜隆
- Industrial Property Rights Type
  特許
- Filing Date
  2013-04-04
- Data Source
  KAKENHI-PROJECT-23560139
[Patent] 旋削による非円形加工方法2012
- Inventor(s)
  森本喜隆
- Industrial Property Rights Holder
  森本喜隆
- Industrial Property Rights Type
  特許
- Filing Date
  2012-04-12
- Data Source
  KAKENHI-PROJECT-23560139
[Patent] 工作機械の加工制御方法2011
- Inventor(s)
  森本喜隆
- Industrial Property Rights Holder
  森本喜隆
- Industrial Property Number
  2011-201017
- Filing Date
  2011
- Data Source
  KAKENHI-PROJECT-23560139
[Presentation] 軸心位置アクティブ制御型主軸の開発2022
- Author(s)
  岡部元紀，森本喜隆
- Organizer
  2022年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20K04215
[Presentation] Development of machine tool spindle with active spindle center position control2022
- Author(s)
  Motoki Okabe, Yuya Akiho, Masayuki Obata, Akio Hayashi, Yoshitaka Morimoto
- Organizer
  euspen’s 22 nd International Conference & Exhibition
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K04215
[Presentation] Active center position control of machine tool spindle2021
- Author(s)
  Yuya Akiho，Yoshitaka Morimoto
- Organizer
  The 10th International Conference on leading Edge Manufacturing in 21st Century
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K04215
[Presentation] 軸心位置アクティブ制御型主軸の開発2021
- Author(s)
  秋保裕矢，森本喜隆
- Organizer
  日本機械学会北陸信越支部第58期総会・講演会
- Data Source
  KAKENHI-PROJECT-20K04215
[Presentation] A Study on Improvement of Reversing motion by Frictional Force Compensation of an NC Moving Table2018
- Author(s)
  Tatsuya Mukai, Yoshitaka Morimoto, Akio Hayashi
- Organizer
  International Conference on Precision Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] Study On Turning Of Non-Axisymmetric Three-Dimensional Curved Surfaces2018
- Author(s)
  Taichi Mori ，Yoshitaka Morimoto ，Akio Hayashi ， Yoshiyuki Kaneko，Naohiko Suzuki，Ryo Hirono
- Organizer
  American Society of Mechanical Engineers
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] Development of 5-Axis 3D Printer with Fused Deposition Modeling Technology2018
- Author(s)
  Hikaru Nishikawa, Yoshitaka Morimoto, Akio Hayashi
- Organizer
  International Symposium on Flexible Automation
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] Vibration Control of Computer Numerically Controlled Lathe With CFRP Pipe Frame2017
- Author(s)
  MORIMOTO YOSHITAKA, YAMADA HONOKA, SAWATANI KAZUKI, SUZUKI NAOHIKO
- Organizer
  ASME 2017 12th International Manufacturing Science and Engineering Conference
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] Improvement of Transfer Technology for Flexible Bands2017
- Author(s)
  YAMASHITA MASAHIRO, MORIMOTO YOSHITAKA, HAYASHI AKIO, NAKAGAKI KATSUYOSI
- Organizer
  the 9th International Conference on Leading Edge Manufacturing in 21st Century
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] タンデムテーブル型 4 軸同期制御CNC 旋盤の開発－応答性の評価－2017
- Author(s)
  長谷川陽，森本喜隆
- Organizer
  精密工学会
- Place of Presentation
  慶應義塾大学
- Year and Date
  2017-03-14
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] Development of Optimized ToolPath Generation Method for to Reduce Energy Consumption of 5-Axis Machine Tool2017
- Author(s)
  OKAMI YOSHIKI,MORIMOTO YOSHITAKA, HAYASHI AKIO, TAKASUGI KEIGO
- Organizer
  the 9th International Conference on Leading Edge Manufacturing in 21st Century
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] Magnetic abrasive finishing of non-axisymmetric curved surfaces using rotating magnetic tool2016
- Author(s)
  Max Stein, Greenslet Hitomi Yamaguchi, Yoshitaka Morimoto
- Organizer
  International Symposium on Flexible Automation
- Place of Presentation
  USA Cleveland
- Year and Date
  2016-08-01
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] Development of a tandem-table-type CNC lathe with four-axis synchronized control2016
- Author(s)
  Akira Hasegawa, Yoshitaka Morimoto
- Organizer
  International Symposium on Flexible Automation
- Place of Presentation
  USA Cleveland
- Year and Date
  2016-08-01
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] Development of CAM system for 3D surface machining with CNC lathe - Improvement of machining accuracy with onmachine mesurement -2015
- Author(s)
  Keigo Takasugi, Yoshitaka Morimoto, Naohiko Suzuki, Yoshiyuki Kaneko
- Organizer
  The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  Kyoto Research Park
- Year and Date
  2015-10-19
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] 非円形旋削加工用機上計測システムの開発2015
- Author(s)
  高杉敬吾，森本喜隆，中垣勝敬
- Organizer
  2015 年度日本機械学会年次大会
- Place of Presentation
  北海道大学
- Year and Date
  2015-09-14
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] Development of a CNC lathe with tandem moving table for high speed turning (Evaluation of high-speed motion and effect of vibration transmission suppression)2015
- Author(s)
  Yoshitaka Morimoto, Keigo Takasugi, Fumiya Yoshimura, Akira Hasegawa, Naohiko Suzuki, Yoshiyuki Kaneko
- Organizer
  The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  Kyoto Research Park
- Year and Date
  2015-10-19
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03905
[Presentation] Creation of Curved Surface by Lathe Turning2012
- Author(s)
  Yoshitaka MORIMOTO, Takayuki Moriyama, Hideharu KATO
- Organizer
  5th CIRP Conference on High Performance Cutting 2012
- Place of Presentation
  Swiss ETH Zürich
- Year and Date
  2012-06-04
- Data Source
  KAKENHI-PROJECT-23560139
[Presentation] Development of linear- motor-driven NC table for high-speed Machining of 3d Surface by Lathe Turning2012
- Author(s)
  Yoshitaka MORIMOTO, Soichiro Emoto, Hideharu KATO
- Organizer
  5th CIRP Conference on High Performance Cutting 2012
- Place of Presentation
  Swiss ETH Zürich
- Year and Date
  2012-06-04
- Data Source
  KAKENHI-PROJECT-23560139
[Presentation] 旋削加工による3次元曲面の実現2011
- Author(s)
  森本喜隆，榎本宗一郎，森山貴幸，金子義幸，中垣勝敬
- Organizer
  2011年度精密工学会周期学術講演会
- Place of Presentation
  金沢大学
- Data Source
  KAKENHI-PROJECT-23560139
[Presentation] 工作機械用パイプフレーム構造の開発－振動制御の適用－2011
- Author(s)
  森本喜隆，鈴木直彦，金子義幸，磯部稔，廣崎憲一，岡崎祐一
- Organizer
  2011年度精密工学会周期学術講演会
- Place of Presentation
  金沢大学
- Data Source
  KAKENHI-PROJECT-23560139
[Presentation] Machining of Non-axisymmetric Curved Surface by Lathe Turning
- Author(s)
  Yoshitaka Morimoto
- Organizer
  ASME
- Place of Presentation
  USA San diego
- Data Source
  KAKENHI-PROJECT-23560139

1. KATO Hideharu (90278101)

# of Collaborated Projects: 8 results

# of Collaborated Products: 11 results
2. SHINTANI Kazuhiro (80139758)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
3. ICHIDA Yoshio (50091939)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. SATO Ryunosuke (20312861)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. Takasugi Keigo (80710235)

# of Collaborated Projects: 2 results

# of Collaborated Products: 4 results
6. 林晃生 (50734430)

# of Collaborated Projects: 2 results

# of Collaborated Products: 6 results
7. OHSAWA Satoshi (50259636)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. 池永訓昭 (30512371)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. 浅川直紀 (50231874)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. 大島政英 (70233103)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. 坂本重彦 (00315285)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. GREENSLET Hitomi Yamaguchi

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results

Morimoto Yoshitaka 森本 喜隆

MORIMOTO Yoshitaka 森本 喜隆

森本 義隆 モリモト ヨシタカ

Research Projects

Research Products

Co-Researchers

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Creation of non-circular and non-axisymmetric inner cylinder machining method by controlling the axis' center position of the machine tool spindlePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Turning and Polishing System for Non-axisymmetric 3D surfacesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Realization of 3D surface machining by turningPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Development of Desktop CNC Lathe with Pipe Frame Structure2019

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

[Journal Article] A Study on Positioning Control of a Moving Table by Real-Time Identification of Dynamic Characteristics2019

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Morimoto Yoshitaka 森本喜隆

MORIMOTO Yoshitaka 森本喜隆

森本義隆モリモトヨシタカ