Suzuki Norikazu 鈴木教和

… Alternative Names

SUZUKI Norikazu 鈴木教和

Less

Researcher Number	00359754
Other IDs
Affiliation (Current)	2025: 神戸大学, 工学研究科, 教授
Affiliation (based on the past Project Information) *help	2021 – 2025: 中央大学, 理工学部, 教授 2015 – 2020: 名古屋大学, 工学研究科, 准教授 2012 – 2015: 名古屋大学, 工学(系)研究科(研究院), 准教授 2012: 名古屋大学, 大学院・工学研究科, 准教授 2012: 名古屋大学, 工学研究科, 准教授 … More 2010 – 2011: 名古屋大学, 工学研究科, 講師 2008 – 2011: Nagoya University, 大学院・工学研究科, 講師 2007 – 2008: 名古屋大学, 大学院・工学研究科, 助教 2006: 名古屋大学, 大学院工学研究科, 助手 2003 – 2005: 名古屋大学, 大学院・工学研究科, 助手 Less
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related Except Principal Investigator Production engineering/Processing studies / Design engineering/Machine functional elements/Tribology / Basic Section 18020:Manufacturing and production engineering-related
Keywords	Principal Investigator 切削加工 / びびり振動 / 切削 / 不安定振動 / 工作機械 / 工具摩耗 / 延性モード加工 / 超音波振動 / 楕円振動切削加工法 / シミュレーション … More / サイバーフィジカルシステム / デジタルツイン / CMP / 切削工具 / プロセスモニタリング / 不等リードエンドミル / 不等ピッチエンドミル / ロバスト設計 / 再生効果 / エンドミル / 旋削加工 / 中ぐり加工 / 振動測定 / 安定限界解析 / エンドミル加工 / 自励振動 / 安定限界 / タングステン合金 / 微細加工 / 圧電素子 / 振動モード / 焼結材料 / ダイヤモンド工具 / 超硬金型 / 臨界切込み量 / 振動切削 / 楕円振動切削 / 工具寿命 / 微細溝加工 / 超精密加工 / 超硬合金 … More Except Principal Investigator 切削力 / 最適化 / 工具姿勢 / 混合整数計画問題 / 数理計画法 / 衝突回避 / 姿勢制御 / 多軸工作機械 / 工程設計 / 流体軸受 / 切削加工 / 超音波振動 / 最終仕上げ工程 / データドリブン / 革新的ロボット研磨技術 / AI融合最適化 / モデルベースシミュレーション / Vacuum / Positioning device / XYθ table / Piezoelectric actuator / Semiconductor production equipment / Ultraprecision alignment table / 超機密アライメント装置 / 真空 / 位置決め装置 / XYθテーブル / 圧電素子 / 半導体製造装置 / 超精密アライメント装置 / 多軸制御 / 工具経路生成 / CAD/CAM / 衝突判定 / 線形計画法 / 数理モデル / 気体軸受 / 非接触浮上 / 進行波 / 機械要素 / トライボロジー / スライダー / 対向型軸受 / 解析モデル / 耐荷重 / 軸受剛性 / 表面張力 / せん断面モデル / 放物線軌跡 / 振動解析 / 放物線振動切削 / 超音波振動切削 / 位相差 / 超精密加工 / 主分力 / 背分力 / 切削プロセス制御 / 楕円振動切削加工法 Less

アクティブプロセス制御を実現する革新的揺動ミリング加工法の提案Principal Investigator
- Principal Investigator
  
  鈴木教和
- Project Period (FY)
  2025 – 2027
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Chuo University
Development of Innovative Robot Polishing Technology by Model Based Simulation and Optimization involving AI
- Principal Investigator
  
  畝田道雄
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa Institute of Technology
次世代CMPプロセスを拓くデジタルツイン基盤とサイバーフィジカルシステムの開発Principal Investigator
- Principal Investigator
  
  鈴木教和
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Chuo University
Design of cutting tool flank texture that overturns the conventional limit in chatter stabilityPrincipal Investigator
- Principal Investigator
  
  Suzuki Norikazu
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Chuo University
  Nagoya University
A novel model-based process monitoring for next-generation cutting technologyPrincipal Investigator
- Principal Investigator
  
  Suzuki Norikazu
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Cutter design of irregular pitch / variable helix end mills to increase chatter stability in cuttingPrincipal Investigator
- Principal Investigator
  
  Suzuki Norikazu
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Optimization of Tool Posture in Multi Axis Machining by Mathematical Programming
- Principal Investigator
  
  Hino Rei
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka Electro-Communication University
  Nagoya University
Development of "Traveling Wave" Air Bearing which Exceeds Limitation of Traditional Principles
- Principal Investigator
  
  SHAMOTO Eiji
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Nagoya University
Optimization of Tool Posture in Multi Axis Machining by Mathematical Programming
- Principal Investigator
  
  HINO Rei
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Proposal of novel chatter suppression method by utilizing anisotropic dynamicsPrincipal Investigator
- Principal Investigator
  
  SUZUKI Norikazu
- Project Period (FY)
  2010 – 2011
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Development of next generation machine tool to enable automatic chatter avoidancePrincipal Investigator
- Principal Investigator
  
  SUZUKI Norikazu
- Project Period (FY)
  2008 – 2009
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Development of parabolic vibration cutting device to realize significant reduction of cutting force
- Principal Investigator
  
  SHAMOTO Eiji
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
表面張力を利用した真空内非接触流体軸受の開発
- Principal Investigator
  
  社本英二
- Project Period (FY)
  2007
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Nagoya University
焼結材料の延性モード加工を可能とする超高周波振動切削加工に関する研究Principal Investigator
- Principal Investigator
  
  鈴木教和
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
放物線振動切削加工法の提案
- Principal Investigator
  
  社本英二
- Project Period (FY)
  2004
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
楕円振動切削を利用した切削プロセス制御の試み
- Principal Investigator
  
  SHAMOTO Eiji
- Project Period (FY)
  2003
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
楕円振動切削加工法による超硬合金の超精密微細加工Principal Investigator
- Principal Investigator
  
  鈴木教和
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Development of ultrapretision alignment table which can be used in vacuum by means of walking drive
- Principal Investigator
  
  SHAMOTO Eiji
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University

[Book] Advanced Applications of Elliptical Vibration Cutting in Micro/Nanomachining of Difficult-to-Cut Materials2018
- Author(s)
  Jianguo Zhang, Norikazu Suzuki, Eiji Shamoto
- Total Pages
  34
- Publisher
  Springer, Singapore
- ISBN
  9789811333354
- Data Source
  KAKENHI-PROJECT-16H04243
[Journal Article] Machine tool calibration: Measurement, modeling, and compensation of machine tool errors2023
- Author(s)
  Gao Wei、Ibaraki Soichi、Donmez M. Alkan、Kono Daisuke、Mayer J.R.R.、Chen Yuan-Liu、Szipka K?roly、Archenti Andreas、Linares Jean-Marc、Suzuki Norikazu
- Journal Title
  
  International Journal of Machine Tools and Manufacture
  
  Volume: 187 Pages: 104017-104017
- DOI
  10.1016/j.ijmachtools.2023.104017
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22652
[Journal Article] Estimation of Hardness and Residual Stress on End-Milled Surfaces Using Linear Regression Model2023
- Author(s)
  Fujii Hideyuki、Takahashi Yukio、Hodohara Jiei、Suzuki Norikazu、Yamada Yuki、Imabeppu Yasuhiro、Irino Naruhiro
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 17 Issue: 6 Pages: 564-574
- DOI
  10.20965/ijat.2023.p0564
- ISSN
  1881-7629, 1883-8022
- Year and Date
  2023-11-05
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23K22652
[Journal Article] Parameter Identification for Linear Model of the Milling Process Using Spindle Speed Variation2023
- Author(s)
  K. Takahei, S. Miwa, E. Shamoto, N. Suzuki
- Journal Title
  
  Precision Engineering
  
  Volume: 79 Pages: 16-33
- DOI
  10.1016/j.precisioneng.2022.08.011
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23K22652
[Journal Article] Process state estimation in chemical mechanical polishing (CMP) by inverse analysis of in-process data2022
- Author(s)
  Suzuki N.、Yamaguchi R.、Hashimoto Y.、Yasuda H.、Yamaki S.、Mochizuki Y.
- Journal Title
  
  CIRP Annals
  
  Volume: 71 Issue: 1 Pages: 273-276
- DOI
  10.1016/j.cirp.2022.04.060
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-22K03839, KAKENHI-PROJECT-23K22652
[Journal Article] Novel method to visualize Preston’s coefficient distribution for chemical mechanical polishing process2022
- Author(s)
  Hashimoto Yohei、Furumoto Tatsuaki、Sato Takumi、Suzuki Norikazu、Yasuda Hozumi、Yamaki Satoru、Mochizuki Yoshihiro
- Journal Title
  
  Japanese Journal of Applied Physics
  
  Volume: 61 Issue: 11 Pages: 116502-116502
- DOI
  10.35848/1347-4065/ac916b
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-22K03839, KAKENHI-PROJECT-23K22652
[Journal Article] Identification of the Model Parameter for Milling Process Simulation with Sensor-integrated Disturbance Observer2022
- Author(s)
  K. Takahei, N. Suzuki, E. Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: 78 Pages: 146-162
- DOI
  10.1016/j.precisioneng.2022.07.013
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23K22652
[Journal Article] Development of Automatic Chatter Suppression System in Parallel Milling by Real-Time Spindle Speed Control with Observer-Based Chatter Monitoring2021
- Author(s)
  Shuntaro Yamato, Kenichi Nakanishi, Norikazu Suzuki, Yasuhiro Kakinuma
- Journal Title
  
  International Journal of Precision Engineering and Manufacturing
  
  Volume: 22 Issue: 2 Pages: 227-240
- DOI
  10.1007/s12541-021-00469-2
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19H02041, KAKENHI-PROJECT-19J13204, KAKENHI-PROJECT-19H00735
[Journal Article] Vibration analysis and cutting simulation of structural nonlinearity for machine tool2021
- Author(s)
  Irino Naruhiro、Imabeppu Yasuhiro、Higuchi Yosuke、Shinba Yuta、Kawai Kengo、Suzuki Norikazu、Kaneko Junichi、Kakinuma Yasuhiro、Mori Masahiko
- Journal Title
  
  CIRP Annals
  
  Volume: 70 Issue: 1 Pages: 317-320
- DOI
  10.1016/j.cirp.2021.04.073
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02041
[Journal Article] Dynamic contour error compensation in micro/nano machining of hardened steel by applying elliptical vibration sculpturing method2021
- Author(s)
  Zhang Jianguo、Suzuki Norikazu、Shamoto Eiji、Xu Jianfeng
- Journal Title
  
  Precision Engineering
  
  Volume: 71 Pages: 250-262
- DOI
  10.1016/j.precisioneng.2021.03.017
- NAID
  120007175379
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Journal Article] Influence of flank texture patterns on suppression of chatter vibration and flank adhesion in turning operation2021
- Author(s)
  Wataru Takahashi, Tomoki Nakanomiya, Norikazu Suzuki, Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: 68 Pages: 262-272
- DOI
  10.1016/j.precisioneng.2020.12.007
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02041
[Journal Article] Experimental verification of design methodology for chatter suppression in tool swing?assisted parallel turning2020
- Author(s)
  Yamato Shuntaro、Nakanishi Kenichi、Suzuki Norikazu、Kakinuma Yasuhiro
- Journal Title
  
  The International Journal of Advanced Manufacturing Technology
  
  Volume: 110 Issue: 7-8 Pages: 1759-1771
- DOI
  10.1007/s00170-020-05951-1
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18H01353, KAKENHI-PROJECT-19H02041, KAKENHI-PROJECT-19J13204
[Journal Article] Development of a novel boring tool with anisotropic dynamic stiffness to avoid chatter vibration in cutting Part 2: Analytical and experimental verification of the proposed method2020
- Author(s)
  Wataru Takahashi, Norikazu Suzuki, Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: 68 Pages: 20-34
- DOI
  10.1016/j.precisioneng.2020.11.008
- NAID
  120007166653
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02041
[Journal Article] Flank face texture design to suppress chatter vibration in cutting2020
- Author(s)
  Norikazu Suzuki, Wataru Takahashi, H. Igeta, Tomoki Nakanomiya
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 69 Issue: 1 Pages: 93-96
- DOI
  10.1016/j.cirp.2020.04.037
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02041
[Journal Article] Development of a novel boring tool with anisotropic dynamic stiffness to avoid chatter vibration in cutting Part 1: Design of anisotropic structure to attain infinite dynamic stiffness2020
- Author(s)
  Wataru Takahashi, Norikazu Suzuki, Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: 68 Pages: 57-71
- DOI
  10.1016/j.precisioneng.2020.11.007
- NAID
  120007166652
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02041
[Journal Article] Enhancement of cutting force observer by identification of position and force-amplitude dependent model parameters2019
- Author(s)
  S.Yamato, A. Sugiyama, N. Suzuki, N. Irino, Y. Imabeppu, Y. Kakinuma,
- Journal Title
  
  International Journal of Advanced Manufacturing Technology
  
  Volume: 104 Issue: 9-12 Pages: 3589-3605
- DOI
  10.1007/s00170-019-04080-8
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01353, KAKENHI-PROJECT-19H02041
[Journal Article] Chatter Suppression in Parallel Turning Assisted with Tool Swing Motion Provided by Feed System2019
- Author(s)
  Shuntaro Yamato, Toshiki Okuma, Kenichi Nakanishi, Junji Tachibana, Norikazu Suzuki, Yasuhiro Kakinuma
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 13 Issue: 1 Pages: 80-91
- DOI
  10.20965/ijat.2019.p0080
- NAID
  130007542986
- ISSN
  1881-7629, 1883-8022
- Year and Date
  2019-01-05
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-16H04243, KAKENHI-PROJECT-19H02041
[Journal Article] Chatter Avoidance in Parallel Turning With Unequal Pitch Angle Using Observer-Based Cutting Force Estimation2018
- Author(s)
  Shinya Sakata, Takashi Kadota, Yuki Yamada, Kenichi Nakanishi, Hayato Yoshioka, Norikazu Suzuki, Yasuhiro Kakinuma
- Journal Title
  
  J. Manuf. Sci. Eng
  
  Volume: 140 Issue: 4 Pages: 044501-044501
- DOI
  10.1115/1.4039111
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04243
[Journal Article] 機械加工の見える化とセンサデータ応用技術2018
- Author(s)
  鈴木教和
- Journal Title
  
  機械技術
  
  Volume: 66 Pages: 21-24
- Data Source
  KAKENHI-PROJECT-16H04243
[Journal Article] 平坦化CMPにおける高精度研磨レート分布推定技術の開発2018
- Author(s)
  鈴木教和，橋本洋平
- Journal Title
  
  精密工学会誌
  
  Volume: 84 Pages: 221-224
- NAID
  130006434078
- Data Source
  KAKENHI-PROJECT-16H04243
[Journal Article] Prediction of polishing pressure distribution in CMP process with airbag type wafer carrier2017
- Author(s)
  N. Suzuki, Y. Hashimoto, H. Yasuda, S. Yamaki, Y. Mochizuki
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 66 Issue: 1 Pages: 329-332
- DOI
  10.1016/j.cirp.2017.04.088
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04243
[Journal Article] Design of irregular pitch end mills to attain robust suppression of regenerative chatter2017
- Author(s)
  N. Suzuki, R. Ishiguro, T. Kojima
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 65 Issue: 1 Pages: 129-132
- DOI
  10.1016/j.cirp.2016.04.041
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04243
[Journal Article] Influence of Clearance Angle on Micro/nano Structure Fabrication in Elliptical Vibration Cutting of Hardened Steel2017
- Author(s)
  Jianguo Zhang, Norikazu Suzuki, Yilong Wang, Eiji Shamoto
- Journal Title
  
  International Journal of Nanomanufacturing
  
  Volume: 13 Issue: 4 Pages: 351-361
- DOI
  10.1504/ijnm.2017.087536
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Journal Article] Mechanics of Chip-Guiding Cutting with Grooved Tools2016
- Author(s)
  青木友弥, Burak SENCER, 鈴木教和, 小出富夫, 社本英二
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 82 Issue: 1 Pages: 75-81
- DOI
  10.2493/jjspe.82.75
- NAID
  130005118320
- ISSN
  0912-0289, 1882-675X
- Language
  Japanese
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] 切削加工におけるびびり振動2016
- Author(s)
  鈴木教和
- Journal Title
  
  トライボロジスト
  
  Volume: 61
- NAID
  130005164601
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Design of irregular pitch end mills to attain robust suppression of regenerative chatter2016
- Author(s)
  N. Suzuki, R. Ishiguro, T. Kojima
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 65
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] 楕円振動切削加工法による超硬合金の超精密微細加工2015
- Author(s)
  鈴木教和
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 59 Pages: 445-448
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] 工作機械の知能化を支えるオブザーバ技術，機械技術と切削理論応用技術2015
- Author(s)
  吉岡勇人，柿沼康弘，鈴木教和
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 59 Pages: 502-507
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Development of a high-performance chip-guiding turning process—tool design and chip flow control2015
- Author(s)
  Tomoya Aoki, Burak Sencer, Eiji Shamoto, Norikazu Suzuki, Tomio Koide
- Journal Title
  
  The International Journal of Advanced Manufacturing Technology
  
  Volume: 1 Issue: 1-4 Pages: 1-15
- DOI
  10.1007/s00170-015-7990-5
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25289015, KAKENHI-PROJECT-16H04243
[Journal Article] Multi-Frequency Solution for Chatter Stability Analysis in Low Immersion End Milling with Irregular Pitch / Variable Helix Cutters2014
- Author(s)
  Takuya KOJIMA, Norikazu SUZUKI, Rei HINO and Eiji SHAMOTO
- Journal Title
  
  Proceedings of the 15th International Conference on Precision Engineering
  
  Volume: 1 Pages: 603-604
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Analytical investigation on polishing pressure distribution by utilizing three-dimensional process simulation2014
- Author(s)
  Yohei Hashimoto, Norikazu Suzuki, Akimitsu Kato, Masakazu Asaba, Eiji Shamoto, Hozumi Yasuda, Satoru Yamaki
- Journal Title
  
  Proceedings of International Conference on Planarization/CMP Technology
  
  Volume: 1 Pages: 20-22
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Ultra-Precision Nano-Structure Fabrication by Amplitude Control Sculpturing Method in Elliptical Vibration Cutting2014
- Author(s)
  Jianguo Zhang, Norikazu Suzuki, Yilong Wang, and Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: 39 Pages: 86-99
- DOI
  10.1016/j.precisioneng.2014.07.009
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Primary study on nonlinear viscoelasticity measurement of chemical mechanical polishing pads by applying on-machine compression test2014
- Author(s)
  Norikazu Suzuki, Akimitsu Kato, Masakazu Asaba, Eiji Shamoto
- Journal Title
  
  Japanese Journal of Applied Physics
  
  Volume: 53 Issue: 5S2 Pages: 05GB01-05GB01
- DOI
  10.7567/jjap.53.05gb01
- NAID
  210000143946
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond2014
- Author(s)
  Jianguo Zhang, Norikazu Suzuki, Yilong Wang, and Eiji Shamoto
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 214 Issue: 11 Pages: 2644-2659
- DOI
  10.1016/j.jmatprotec.2014.05.024
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Force prediction in cutting operations with self-propelled rotary tools considering bearing friction2014
- Author(s)
  Norikazu Suzuki, Toru Suzuki, Ran An, Kota Ukai, Eiji Shamoto, Yu Hasegawa, Nobukazu Horiike
- Journal Title
  
  Procedia CIRP
  
  Volume: 14 Pages: 125-129
- DOI
  10.1016/j.procir.2014.03.033
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Tool failure Mechanism in High-Speed Milling of Inconel 718 by Use of Ceramic Tools2014
- Author(s)
  N. Suzuki, R. Enmei, Y. Hashimoto, E. Shamoto and Y. Hatano
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 8 Pages: 837-846
- NAID
  130007673896
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Investigation on Machining Performance of Amplitude Control Sculpturing Method in Elliptical Vibration Cutting2013
- Author(s)
  J. Zhang, N. Suzuki, E. Shamoto
- Journal Title
  
  Procedia CIRP
  
  Volume: 8 Pages: 327-332
- DOI
  10.1016/j.procir.2013.06.111
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Suppression of Regenerative Chatter Vibration in Multiple Milling Utilizing Speed Difference Method - Analysis of Double-Sided Milling and Its Generalization to Multiple Milling Operations2013
- Author(s)
  Eiji Shamoto, Tatsuya Mori, Burak Sencer, Norikazu Suzuki and Rei Hino
- Journal Title
  
  Precision Engineering
  
  Volume: Vol.37, Issue 3 Issue: 3 Pages: 580-589
- DOI
  10.1016/j.precisioneng.2013.01.003
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-11F01054, KAKENHI-PROJECT-25289015
[Journal Article] 研磨パッドの微細凹凸接触を考慮した CMP プロセスの EHL 解析2013
- Author(s)
  橋本洋平, 鈴木教和,浅羽正和, 樋野励,社本英二
- Journal Title
  
  精密工学会誌
  
  Volume: 79-2 Pages: 73-80
- NAID
  130003369770
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] A Novel Design Method of Variable Helix Cutters to Attain Robust Regeneration Suppression2013
- Author(s)
  Takuya Kojima, Norikazu Suzuki, Rei Hino, Eiji Shamoto
- Journal Title
  
  Procedia CIRP
  
  Volume: 8 Pages: 362-366
- DOI
  10.1016/j.procir.2013.06.117
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Analysis of three-dimensional cutting process with thin shear plane model2013
- Author(s)
  Eiji Shamoto, Masahiro Kato, Norikazu Suzuki, Rei Hino
- Journal Title
  
  Journal of Manufacturing Science and Engineering
  
  Volume: 135 Issue: 4 Pages: 41001-41001
- DOI
  10.1115/1.4024531
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Confocal Microscopic Evaluation of Mixing Performance for Three-Dimensional Microfluidic Mixer2012
- Author(s)
  T. Yasui, Y. Omoto, K. Osato, N. Kaji, N. Suzuki, T. Naito, M. Watanabe, Y. Okamoto, M. Tokeshi, E. Shamoto and Y. Baba
- Journal Title
  
  Anal. Sci.
  
  Volume: 28 Issue: 1 Pages: 57
- DOI
  10.2116/analsci.28.57
- NAID
  130004827178
- ISSN
  0910-6340, 1348-2246
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760097
[Journal Article] A novel tool path/posture optimization concept to avoid chattervibration in machining - Proposed concept and its verification in turning2012
- Author(s)
  Eiji Shamoto, Shunsuke Fujimaki, Burak Sencer, Norikazu, Suzuki, Takashi Kato, Rei Hino
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 61/1 Issue: 1 Pages: 331-334
- DOI
  10.1016/j.cirp.2012.03.133
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-11F01054, KAKENHI-PROJECT-22560107
[Journal Article] Identification of Transfer Function by Inverse Analysis of Self-Excited Chatter Vibration in Milling Operations2012
- Author(s)
  N.Suzuki
- Journal Title
  
  Precision engineering
  
  Volume: (印刷中)(in press) Issue: 4 Pages: 568-575
- DOI
  10.1016/j.precisioneng.2012.04.004
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760097
[Journal Article] Identification of Transfer Function by Inverse Analysis of Self-Excited Chatter Vibration in Milling Operations2012
- Author(s)
  N. Suzuki, Y. Kurata, T. Kato, R. Hino, E. Shamoto
- Journal Title
  
  Precision engineering
  
  Volume: (in press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760097
[Journal Article] A Novel Tool Path/posture Optimization Concept to Avoid Chatter Vibration in Machining-Proposed concept and it verification in Turning2012
- Author(s)
  Eiji Shamoto, Shunsuke Fujimaki, Burak Sencer, Norikazu, Suzuki, Takashi Kato, Rei Hino
- Journal Title
  
  CIRP Annals Manufacturing Technology
  
  Volume: Vol.61 Pages: 331-334
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560107
[Journal Article] パイこね変換に基づく量産対応・高速ミキサの開発2012
- Author(s)
  尾本悠輔,加藤大香士,鈴木教和,安井隆雄,大里恵子,加地範匡,渡慶次学,馬場嘉信,酒井康彦,社本英二
- Journal Title
  
  日本機械学会論文集 B1 編
  
  Volume: 78-2 Pages: 762-768
- NAID
  130002050716
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Control of chip flow with guide grooves for continuous chip disposal and chip-pulling turning2011
- Author(s)
  E.Shamoto, T.Aoki, B.Sencer, N.Suzuki, R.Hino, T.Koide
- Journal Title
  
  CIRP Annals-Manufacturing Technology
  
  Volume: 印刷中(未定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Control of chip flow with guide grooves for continuous chip disposal and chip-pulling turning2011
- Author(s)
  Eiji Shamoto, T omoya Aoki, BurakSencer, Norikazu Suzuki, Rei Hino, Tomio Koide
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: Vol.60 Pages: 125-128
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Ultra-precision nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting2011
- Author(s)
  N.Suzuki
- Journal Title
  
  Precision engineering
  
  Volume: 35 Pages: 44-50
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760097
[Journal Article] CMP プロセスにおける接触応力の動的有限要素法解析2011
- Author(s)
  橋本洋平, 鈴木教和, 樋野励, 社本英二
- Journal Title
  
  精密工学会誌
  
  Volume: 77-2 Pages: 513-519
- NAID
  130001362307
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] 異方性を持つ低剛性工具によるエンドミル加工時のびびり振動安定限界2011
- Author(s)
  倉田祐輔, 鈴木教和, 樋野励, 社本英二
- Journal Title
  
  精密工学会誌
  
  Volume: 77 Pages: 97-104
- NAID
  130000812182
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560107
[Journal Article] Investigation of tool wear suppression in ultraprecision diamond machining of die steel2011
- Author(s)
  Y. Wang, N. Suzuki, E. Shamoto, Q. Zhao
- Journal Title
  
  Precision engineering
  
  Volume: Vol.35 Issue: 4 Pages: 677-685
- DOI
  10.1016/j.precisioneng.2011.05.003
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760097
[Journal Article] Dynamic Finite Element Analysis of Contact Stress in CMP Process2011
- Author(s)
  橋本洋平, 鈴木教和, 樋野励, 社本英二
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 77 Issue: 5 Pages: 513-519
- DOI
  10.2493/jjspe.77.513
- NAID
  130001362307
- ISSN
  0912-0289, 1882-675X
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070, KAKENHI-PROJECT-22760097
[Journal Article] 異方性を持つ低剛性工具によるエンドミル加工時のびびり振動安定限界2011
- Author(s)
  倉田祐輔,鈴木教和,樋野励,社本英二
- Journal Title
  
  精密工学会誌
  
  Volume: 77巻 Pages: 97-104
- NAID
  130000812182
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560107
[Journal Article] Studies on Continuous Chip Disposal and Chip-Pulling Cutting2011
- Author(s)
  社本英二, 安田浩一朗, 青木友弥, 鈴木教和, 小出富夫
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 77 Issue: 5 Pages: 520-524
- DOI
  10.2493/jjspe.77.520
- NAID
  130001362308
- ISSN
  0912-0289, 1882-675X
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070, KAKENHI-PROJECT-22760097
[Journal Article] Microfluidic baker's transformation device for three-dimensional rapid mixing2011
- Author(s)
  T. Yasui, Y. Omoto, K. Osato, N. Kaji, N. Suzuki, T. Naito, M. Watanabe, Y. Okamoto, M. Tokeshi, E. Shamoto and Y. Baba
- Journal Title
  
  Lab Chip
  
  Volume: 11(19) Pages: 3356-3360
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760097
[Journal Article] Micro/nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting2011
- Author(s)
  Norikazu Suzuki, Hideo Yokoi, Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: Vol.35, Issue 1 Pages: 44-50
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Micro/nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting2011
- Author(s)
  N. Suzuki, H. Yokoi, E. Shamoto
- Journal Title
  
  Precision engineering
  
  Volume: Vol.35 Pages: 44-50
- URL
  http://dx.doi.org/10.1016/j.precisioneng.2010.09.006
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760097
[Journal Article] Control of chip flow with guide grooves for continuous chip disposal and chip-pulling turning2011
- Author(s)
  Eiji Shamoto, Tomoya Aoki, Burak Sencer, Norikazu Suzuki, Rei Hino, Tomio Koide
- Journal Title
  
  CIRP Annals-Manufacturing Technology
  
  Volume: 60 Issue: 1 Pages: 126-128
- DOI
  10.1016/j.cirp.2011.03.081
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-11F01054, KAKENHI-PROJECT-22360070, KAKENHI-PROJECT-22760097
[Journal Article] Effect of Cross Transfer Function on Chatter Stability in Plunge Cutting2010
- Author(s)
  N. SUZUKI, K. NISHIMURA, E. SHAMOTO, K. YOSHINO
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing
  
  Volume: Vol.4 Pages: 883-891
- NAID
  130000335362
- URL
  http://dx.doi.org/10.1299/jamdsm.4.883
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760097
[Journal Article] Chatter Stability in Turning and Milling with in Process Identified Process Damping2010
- Author(s)
  Yusuke Kurata, S. Doruk Merdol, Yusuf Altintas, Norikazu Suzuki, Eiji Shamoto
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing
  
  Volume: Vol. 4, No. 6 Pages: 1107-1118
- NAID
  130000335384
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Chatter Stability in Turning and Milling with in Process Identified Process Damping2010
- Author(s)
  Y. Kurata, S. D. Merdol, Y. Altintas, N. Suzuki, E. Shamoto
- Journal Title
  
  JAMDSM
  
  Volume: 4 Issue: 6 Pages: 1107-1118
- DOI
  10.1299/jamdsm.4.1107
- NAID
  130000335384
- ISSN
  1881-3054
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760097
[Journal Article] FE Analysis of One-Directional and Elliptical Vibration Cutting Processes2010
- Author(s)
  S. Amini, E. Shamoto, N. Suzuki and M. J. Nategh
- Journal Title
  
  International journal of automation technology
  
  Volume: Vol.4/3 Pages: 252-258
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760097
[Journal Article] 切削加工におけるびびり振動(前編)「初めての精密工学」2010
- Author(s)
  鈴木教和
- Journal Title
  
  精密工学会誌 76
  
  Pages: 404-408
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Effect of Cross Transfer Function on Chatter Stability in Plunge Cutting2010
- Author(s)
  N.SUZUKI
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing
  
  Volume: 4 Pages: 883-891
- NAID
  130000335362
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760097
[Journal Article] 切削加工におけるびびり振動(前編)「初めての精密工学」2010
- Author(s)
  鈴木教和
- Journal Title
  
  精密工学会誌 76巻3号
  
  Pages: 280-284
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] 強制・自励型びびり振動を回避するエンドミル加工条件の統合的検討2009
- Author(s)
  鈴木教和, 井加田勲, 樋野励, 社本英二
- Journal Title
  
  精密工学会誌 (未定掲載決定)
- NAID
  130000421709
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] 強制・自励型びびり振動を回避するエンドミル加工条件の統合的検討2009
- Author(s)
  鈴木教和, 井加田勲, 樋野励, 社本英二
- Journal Title
  
  精密工学会誌 75巻7号
  
  Pages: 908-914
- NAID
  130000421709
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Effect of Cross Transfer Function on Chatter Stability in Plunge Cutting2009
- Author(s)
  N. SUZUKI, K. NISHIMURA, E. SHAMOTO, K. YOSHINO
- Journal Title
  
  Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century
  
  Pages: 501-505
- NAID
  130000335362
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Ultra-precision micro texturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting2009
- Author(s)
  Norikazu Suzuki, Hideo Yokoi, Eiji Shamoto
- Journal Title
  
  Proceedings of 9th International Conference of the European Society for Precision Engineering and Nanotechnology 2
  
  Pages: 406-409
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Effect of cross transfer function on chatter stability in plunge cutting2009
- Author(s)
  Norikazu SUZUKI, Kohei NISHIMURA, Eiji SHAMOTO, Kiyoshi YOSHINO
- Journal Title
  
  Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century 1
  
  Pages: 501-505
- NAID
  130000335362
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Chatter Suppression in Milling with Anisotropic Tools2009
- Author(s)
  Yusuke KURATA, Norikazu SUZUKI, Rei HINO, Eiji SHAMOTO
- Journal Title
  
  Proceedings of the 2009 International Symposium on Micromechatronics and Human Science
  
  Pages: 547-552
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Chatter Suppression in Milling with Anisotropic Tools2009
- Author(s)
  Yusuke KURATA, Norikazu SUZUKI, Rei HIND, Eiji SHAMOTO
- Journal Title
  
  Proceedings of the 2009 International Symposium on Micromechatronics and Human Science 1
  
  Pages: 547-552
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Analytical Study of Effects of Material Properties and Polishing Conditions on Tribological Phenomena during CMP2009
- Author(s)
  Yohei HASHIMOTO, Norikazu Suzuki, Rei HINO, Eiji SHAMOTO
- Journal Title
  
  Proceedings of International Conference on Planarization/CMP Technology (ICPT 2009 in Japan) 1
  
  Pages: 489-494
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] 強制・自励型びびり振動を回避するエンドミル加工条件の統合的検討2009
- Author(s)
  鈴木教和, 井加田勲, 樋野励, 社本英二
- Journal Title
  
  精密工学会誌 75
  
  Pages: 908-914
- NAID
  130000421709
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] リエントラントフロートショップスケジューリング問題に関する研究(第1報)数理計画法による最適化2008
- Author(s)
  樋野励, 上川大輔, 森川正憲, 鈴木教和, 社本英二
- Journal Title
  
  精密工学会誌 74
  
  Pages: 1119-1124
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Development of Elliptical Vibration Cutting Technology and Its Application to Ultraprecision/Micro Machining of Hard/Brittle Materials2008
- Author(s)
  Eiji Shamoto and Norikazu Suzuki
- Journal Title
  
  Proceedings of the 6 th CHINA-JAPAN international Conference on Ultra-Precision Machining (CJICUPM 2008) 1
  
  Pages: 95-98
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Analysis of 3D Elliptical Vibration Cutting with Thin Shear Plane Model2008
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Rei Hino
- Journal Title
  
  Annals of the CIRP Vol.57/1(掲載決定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Identification of transfer function of mechanical structure by inverse analysis of regenerative chatter vibration in end milling2008
- Author(s)
  Norikazu SUZUKI, Yusuke KURATA, Rei HINO, Eiji SHAMOTO
- Journal Title
  
  Proceedings of the 3rd international CIRP high performance cutting conference
  
  Pages: 455-463
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Analysis of 3D Elliptical Vibration Cutting with Thin Shear Plane Model2008
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Rei Hino
- Journal Title
  
  CIRP Annals - Manufacturing Technology 57/1
  
  Pages: 57-60
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] A New Method to Control Work-in-Process Inventory for High Manufacturing Productivity2008
- Author(s)
  Rei Hino, Norikazu Suzuki and Eiji Shamoto
- Journal Title
  
  Proc. of the 41st CIRP International Conference on Manufacturing Systems (掲載決定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19656044
[Journal Article] リエントラントフロートショップスケジューリング問題に関する研究(第2報)発見的なスケジューリング手法の提案2008
- Author(s)
  樋野励, 上川大輔, 森川正憲, 鈴木教和, 社本英二
- Journal Title
  
  精密工学会誌 74
  
  Pages: 1225-1230
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Analysis of 3 D Elliptical Vibration Cutting with Thin Shear Plane Model2008
- Author(s)
  E. Shamoto, N. Suzuki, R. Hino
- Journal Title
  
  Annals of the CIRP 57
  
  Pages: 57-60
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] リエントラントフローショップスケジューリング問題に関する研究(第1報)数理計画法による最適化2008
- Author(s)
  樋野励, 上川大輔, 森川正憲, 鈴木教和, 社本英二
- Journal Title
  
  精密工学会誌 74-10
  
  Pages: 1119-1124
- NAID
  110006951294
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Identification of transfer function of mechanical structure by inverse analysis of regenerative chatter vibration in end milling2008
- Author(s)
  Norikazu SUZUKI, Yusuke KURATA, Eiji SHAMOTO
- Journal Title
  
  Proceedings of the 3 rd international CIRP high performance cutting conference 1
  
  Pages: 455-463
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] Analysis of 3D Elliptical Vibration Cutting with Thin Shear Plane Model2008
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Rei Hino
- Journal Title
  
  CIRP Annals-Manufacturing Technology 57
  
  Pages: 57-60
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Elliptical Vibration Cutting of Hard Mold Materials2008
- Author(s)
  Eiji Shamoto and Norikazu Suzuki
- Journal Title
  
  Proceedings of Frontiers in Optics 2008, OSA's 92 nd Annual Meeting and Exhibit, Topical Meeting on Optical Fabrication and Testing (OFT) 1(CD-ROM)
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] リエントラントフローショップスケジューリング問題に関する研究(第2報)発見的なスケジュール手法の提案2008
- Author(s)
  樋野励, 上川大輔, 森川正憲, 鈴木教和, 社本英二
- Journal Title
  
  精密工学会誌 74-11
  
  Pages: 1225-1230
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] A New Method to Control Work-in-Process Inventory for High Manufacturing Productivity2008
- Author(s)
  Rei Hino, Norikazu Suzuki and Eiji Shamoto
- Journal Title
  
  Manufacturing Systems and Technologies for the New Frontier : The 41 st CIRP Conference on Manufacturing Systems 1
  
  Pages: 221-224
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] FE Analysis of One Directional and Elliptical Ultrasonic Vibration-Assisted Cutting of IN 7382008
- Author(s)
  Saiid Amini, Eiji Shamoto, Norikazu Suzuki
- Journal Title
  
  Proceedings of the International Conference on Advances in Materials and Processing Technologies 2008 (AMPT 2008) 1(CD-ROM)
- Data Source
  KAKENHI-PROJECT-20760083
[Journal Article] 楕円振動切削によるタングステン合金の超精密微細加工2007
- Author(s)
  鈴木教和他6名
- Journal Title
  
  精密工学会誌 73・3
  
  Pages: 360-366
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] Elliptical Vibration Cutting of Tungsten Alloy Molds for Optical Glass Parts2007
- Author(s)
  Norikazu Suzuki, Makoto Haritani, Ji-bin Yang, Rei Hino, Eiji Shamoto
- Journal Title
  
  Annals of the CIRP Vol.56/1
  
  Pages: 127-130
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Development of 3 DOF Ultrasonic Elliptical Vibration System for Elliptical Vibration Cutting2007
- Author(s)
  Norikazu Suzuki, Rei Hino and Eiji Shamoto
- Journal Title
  
  Annals of the CIRP
  
  Pages: 15-2
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] 楕円振動切削による金型鋼の自由曲面加工(第2報)-3自由度超音波楕円振動工具の開発2007
- Author(s)
  鈴木教和他3名
- Journal Title
  
  精密工学会誌 73・1
  
  Pages: 117-123
- NAID
  110006152490
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] Simulation of Elliptical Vibration Cutting Process with Thin Shear Plane Model2007
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Rei Hino
- Journal Title
  
  Proceedings of ASPE Spring Topical Meeting on Vibration Assisted Machining Technology
  
  Pages: 64-69
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] 超音波楕円振動切削によるタングステン合金の超精密微細加工-基礎的な切削性能の評価-2006
- Author(s)
  鈴木教和他5名
- Journal Title
  
  2006年度精密工学会春季大会学術講演会講演論文集 1・1
  
  Pages: 1031-1032
- NAID
  130005027094
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] Ultraprecision Micro-Machining of Single Crystal Germanium by Applying Elliptical Vibration Cutting2006
- Author(s)
  N.Suzuki, et al.
- Journal Title
  
  Proceedings of the 2006 International Symposium on Micromechatronics and Human Science 1・1
  
  Pages: 67-72
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] 楕円振動切削による金型鋼の自由曲面加工(第1報)-新しい加工方法の提案と高精度4軸加工機の開発2006
- Author(s)
  社本英二, 鈴木教和他4名
- Journal Title
  
  精密工学会誌 72・9
  
  Pages: 1139-1145
- NAID
  110004798304
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] Ultraprecision Micro-Machining of Single Crystal Germanium by Applying Elliptical Vibration Cutting2006
- Author(s)
  N.Suzuki, et al.
- Journal Title
  
  Proceedings of the CIRP 2nd International Conference on High Performance Cutting 1・1(CD-ROM)
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] 超硬合金の超精密楕円振動切削 -延性モード切削機構の検討-2006
- Author(s)
  鈴木教和他3名
- Journal Title
  
  精密工学会誌 72・4
  
  Pages: 539-545
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] A New Method to Machine Sculptured Surfaces by Applying Ultrasonic Elliptical Vibration Cutting2005
- Author(s)
  E.Shamoto, N.Suzuki, et al.
- Journal Title
  
  Proceedings of the 2005 International Symposium on Micromechatronics and Human Science, pp.91-96,(2005) 1・1
  
  Pages: 91-96
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] CMPにおける研磨レート解析に関する研究2005
- Author(s)
  鈴木教和他3名
- Journal Title
  
  日本機械学会東海学生会第36回学生員卒業研究発表講演会講演前刷集 1・1
  
  Pages: 249-250
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] Development of 3 DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces2005
- Author(s)
  E.Shamoto, N.Suzuki, et al.
- Journal Title
  
  Annals of the CIRP 54・1(to be published)
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] 楕円振動切削による硬脆材料の超精密微細溝加工2005
- Author(s)
  鈴木教和, 社本英二
- Journal Title
  
  機械技術 53・12
  
  Pages: 80-81
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] Development of 3DOF Ultrasonic Vibration Tool for Elliptical Vibration Cutting of Sculptured Surfaces2005
- Author(s)
  E.Shamoto, N.Suzuki, et al.
- Journal Title
  
  Annals of CIRP 54・1
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] Development of Fluid Bearing Utilizing Traveling Wave2005
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Akihide Hamaguchi
- Journal Title
  
  Proc.of 2005 JSPE Spring Conference
  
  Pages: 1063-1064
- NAID
  130004657784
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] タングステン合金の超精密超音波楕円振動切削2005
- Author(s)
  鈴木教和他5名
- Journal Title
  
  型技術 20・15
  
  Pages: 80-81
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] 惰円振動切削プロセスの制御とよる低剛性工作物の高精度加工2005
- Author(s)
  社本英二, 鈴木教和他2名
- Journal Title
  
  日本機械学会東海学生会第36回学生員卒業研究発表講演会講演前刷集 1・1
  
  Pages: 193-194
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] 楕円振動切削によるタングステン合金の超精密微細加工2005
- Author(s)
  鈴木教和他4名
- Journal Title
  
  2005年度砥粒加工学会学術講演会講演論文集 1・1
  
  Pages: 201-202
- Data Source
  KAKENHI-PROJECT-17760103
[Journal Article] 超音波楕円振動切削による超精密・微細金型加工技術2004
- Author(s)
  社本英二, 鈴木教和
- Journal Title
  
  機械技術 Vol.52 No.13
  
  Pages: 23-27
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] Ultraprecision Micromachining of Brittle Materials by Applying Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  N.Suzuki
- Journal Title
  
  Proceedings of the 2004 International Symposium on Micro mechatronics and Human Science
  
  Pages: 133-138
- Data Source
  KAKENHI-PROJECT-16656051
[Journal Article] Ultraprecision Machining of Sintered Tungsten Carbide by Applying Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  N.Suzuki
- Journal Title
  
  Proceedings of 4th International Conference of the European Society for Precision Engineering and Nanotechnology
  
  Pages: 187-188
- Data Source
  KAKENHI-PROJECT-16656051
[Journal Article] Ultraprecision/Micro Die and Mould Technology to Realize Impossible Manufacturing2004
- Author(s)
  E.Shamoto, N.Suzuki
- Journal Title
  
  Die and Mould Technology Vol.19 No.10
  
  Pages: 46-47
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Cutting process control in elliptical vibration cutting2004
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Akio Kato, Kazuhiko Yanagida
- Journal Title
  
  Proc.of 2004 JSPE Autumn Conference
  
  Pages: 687-688
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 超音波楕円振動切削による硬脆材料の延性モード加工 -材料特性の影響-2004
- Author(s)
  鈴木教和他3名
- Journal Title
  
  2004年度砥粒加工学会学術講演会講演論文集 1・1
  
  Pages: 97-98
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] Ultraprecision Micromachining of Brittle Materials by Applying Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  N.Suzuki, et al.
- Journal Title
  
  Proceedings of the 2004 International Symposium on Micromechatronics and Human Science 1・1
  
  Pages: 133-138
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] 惰円振動切削による超硬合金の延性モード加工 -加工メカニズムの検討-2004
- Author(s)
  鈴木教和他2名
- Journal Title
  
  2004年度精密工学会秋季大会学術講演会講演論文集 1・1
  
  Pages: 683-684
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] Development of Elliptical Vibration Cutting Technology to Realize Ultraprecision Micro Machining of Hard Dies and Moulds2004
- Author(s)
  E.Shamoto, N.Suzuki, S.Hamada
- Journal Title
  
  Die and Mould Technology Vol.19 No.12
  
  Pages: 55-58
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Machining of Sintered Tungsten Carbide by Applying Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  N.Suzuki
- Journal Title
  
  Proceedings of 4th International Conference of the European Society for Precision Engineering and Nanotechnology
  
  Pages: 187-188
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Machining of Sintered Tungsten Carbide by Applying Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  N.Suzuki, S.Masuda, E.Shamoto
- Journal Title
  
  Proc.of 4th International Conference and 6th annual general meeting of the European Society for Precision Engineering and Nanotechnology(EUSPEN)
  
  Pages: 187-188
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 不可能を可能にする超精密・超微細金型技術2004
- Author(s)
  社本英二, 鈴木教和
- Journal Title
  
  型技術 Vol.19 No.10
  
  Pages: 46-47
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] Ultraprecision/Micro Machining of Dies and Moulds by Applying Elliptical Vibration Cutting2004
- Author(s)
  E.Shamoto, N.Suzuki
- Journal Title
  
  Mechanical Engineering Vol.52 No.13
  
  Pages: 23-27
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 楕円振動切削加工法における切削プロセス制御の試み2004
- Author(s)
  社本英二, 鈴木教和他1名
- Journal Title
  
  2004年度精密工学会秋季大会学術講演会講演論文集 1・1
  
  Pages: 687-688
- NAID
  130004655699
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] 自由曲面の楕円振動切削を実現する3自由度超音波振動制御システムの開発2004
- Author(s)
  鈴木教和他2名
- Journal Title
  
  2004年度精密工学会秋季大会学術講演会講演論文集 1・1
  
  Pages: 685-686
- NAID
  130004655698
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] 自由曲面の楕円振動切削を実現する3自由度超音波振動制御システムの開発2004
- Author(s)
  鈴木教和
- Journal Title
  
  2004年度精密工学会秋季大会学術講演会講演論文集
  
  Pages: 685-686
- NAID
  130004655698
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Micromachining of Brittle Material by Applying Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  N.Suzuki
- Journal Title
  
  Proceedings of the 2004 International Symposium on Micromechatronics and Human Science
  
  Pages: 133-138
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Micromachining of Brittle Materials by Applying Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  Norikazu Suzuki, Shinsuke Masuda, Makoto Haritani, Eiji Shamoto
- Journal Title
  
  Proc.Of the 2004 International Symposium on Micro-Nano Mechatronics and Human Science-From Micro & Nano Scale Systems to Robotics & Mechatronics Systems
  
  Pages: 133-138
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Proposal of a New Fluid Bearing Utilizing Surface Tension2004
- Author(s)
  Eiji Shamoto, Kento Hashimoto, Norikazu Suzuki
- Journal Title
  
  Proc.of 2003 JSPE Spring Conference
  
  Pages: 621-622
- NAID
  130004656226
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Micromachining of Brittle Materials by Applying Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  N.Suzuki
- Journal Title
  
  Proceedings of the 2004 International Symposium on Micromechatronics and Human Science
  
  Pages: 133-138
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 楕円振動切削による超硬合金の延性モード加工-加工メカニズムの検討-2004
- Author(s)
  鈴木教和
- Journal Title
  
  2004年度精密工学会秋季大会学術講演会講演論文集
  
  Pages: 683-684
- NAID
  130004655697
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 高硬度金型の超精密微細加工を実現する楕円振動切削加工技術の開発2004
- Author(s)
  社本英二, 鈴木教和
- Journal Title
  
  型技術 Vol.19 No.12
  
  Pages: 55-58
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] Ultraprecision Machining of Sintered Tungsten Carbide by Applying Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  N.Suzuki, et al.
- Journal Title
  
  Proceedings of 4th International Conference of the European Society for Precision Engineering and Nanotechnology 1・1
  
  Pages: 187-188
- Data Source
  KAKENHI-PROJECT-15760078
[Journal Article] 超音波楕円振動切削による硬脆材料の延性モード加工-材料特性の影響-2004
- Author(s)
  鈴木教和
- Journal Title
  
  2004年度砥粒加工学会学術講演会講演論文集
  
  Pages: 97-98
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 楕円振動切削加工法による金型鋼の超精密・微細加工2003
- Author(s)
  鈴木教和
- Journal Title
  
  型技術 18巻13号
  
  Pages: 16-17
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Micromachining of Hardened Steel by Applying Ultrasonic Elliptical Vibration Cutting2003
- Author(s)
  Norikazu SUZUKI
- Journal Title
  
  2003 International Symposium on Micromechatronics and Human Science
  
  Pages: 221-226
- NAID
  120000973976
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Development of Elliptical Vibration Cutting Machine by Utilizing Mechanical Vibrator2003
- Author(s)
  Eiji SHAMOTO, YoungChan SONQ Hideki YOSHIDA, Norikazu SUZUKI, Toshimichi MORIWAKI, Seido KOHDA, Tetsuji YAMANISHI
- Journal Title
  
  JSPE Vol.69, No.4
  
  Pages: 542-548
- NAID
  110001373530
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Machining of Hard Materials by Applying Ultrasonic Elliptical Vibration Cutting2003
- Author(s)
  Eiji SHAMOTO, Norikazu SUZUKI
- Journal Title
  
  Int.Progress on Advanced Optics and Sensors
  
  Pages: 195-201
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision/Micro Machining of Die Materials by Applying Elliptical Vibration Cutting2003
- Author(s)
  Norikazu SUZUKI, Eiji SHAMOTO, et al.
- Journal Title
  
  Die and Mould Technology Vol.18, No.13
  
  Pages: 16-17
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Micromachining of Hardened Steel by Applying Ultrasonic Elliptical Vibration Cutting2003
- Author(s)
  Norikazu SUZUKI, Akihiro NAKAMURA, Eiji SHAMOTO, Kazuhiro HARADA, Makoto MATSUO, Michio OSADA
- Journal Title
  
  2003 International Symposium on Micromechatronics and Human Science(MHS2003)
  
  Pages: 221-226
- NAID
  120000973976
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Development of 3 DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Eiji Tsuchiya, Y.Hori, H.Inagaki, K.Yoshino
- Journal Title
  
  Annals of the CIRP Vol.54/1(to be published)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Presentation] 次世代CMPプロセス制御を実現するMRRオブザーバの開発とその実験検証2024
- Author(s)
  平野航大，鈴木教和，橋本洋平，渡邉夕貴
- Organizer
  2024年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-23K22652
[Presentation] Simulation of CMP abrasive behavior considering pad surface topography2023
- Author(s)
  Taku Ishihara, Akihito Hashimoto, Norikazu Suzuki, Yohei Hashimoto, Satoru Yamaki, Hozumi Yasuda, Yoshihiro Mochizuki
- Organizer
  The International Conference on Planarization Technology (ICPT 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22652
[Presentation] CMPプロセスの高精度シミュレーション手法の実験的検証2023
- Author(s)
  平野航大，鈴木教和，橋本洋平，山木暁，安田穂積，望月宜宏
- Organizer
  2023年度精密工学会秋季大会学生研究発表会
- Data Source
  KAKENHI-PROJECT-23K22652
[Presentation] Advanced simulation technology for next generation CMP2023
- Author(s)
  Norikazu Suzuki
- Organizer
  The 4th Science Salon - Next Generation Green Power Technology
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22652
[Presentation] CMP process modeling and its digital twin technology2023
- Author(s)
  Norikazu Suzuki
- Organizer
  CIRP General Assembly 2023
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22652
[Presentation] Experimental Verification of Model-based CMP Process Simulation Considering Distribution of Material Removal Efficiency2023
- Author(s)
  Kodai Hirano, Norikazu Suzuki, Yohei Hashimoto, Satoru Yamaki, Hozumi Yasuda, Yoshihiro Mochizuki
- Organizer
  The 25th International Symposium on Advances in Abrasive Technology (ISAAT2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22652
[Presentation] CMP砥粒の動的挙動シミュレーションに関する基礎検討2023
- Author(s)
  石原汰公，鈴木教和，橋本洋平，山木暁，安田穂積，望月宜宏
- Organizer
  2023年度精密工学会秋季大会学生研究発表会
- Data Source
  KAKENHI-PROJECT-23K22652
[Presentation] ウェハ回転運動を考慮した研磨効率分布モデルとパラメータ同定手法の提案2023
- Author(s)
  佐藤拓実，鈴木教和，橋本洋平，山木暁，安田穂積，望月宜宏
- Organizer
  2023年度精密工学会秋季大会学生研究発表会
- Data Source
  KAKENHI-PROJECT-23K22652
[Presentation] 逃げ面テクスチャ工具によるびびり抑制効果の時間領域シミュレーション2022
- Author(s)
  横川優弥，鈴木教和，藤中翼
- Organizer
  2022年度精密工学会春季大会，第29回学生会員卒業研究発表講演会講演論文集
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] チタン合金の低周波振動切削における工具摩耗生成メカニズムの分析2022
- Author(s)
  寺谷浩登，高橋幸男，矢野礼緒，鈴木教和
- Organizer
  2022年度精密工学会春季大会，第29回学生会員卒業研究発表講演会講演論文集
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] 有限振動振幅の影響を考慮した時間領域シミュレーションによる加工面の予測2022
- Author(s)
  程原述英，鈴木教和
- Organizer
  2022年度精密工学会春季大会，第29回学生会員卒業研究発表講演会講演論文集
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] CMP simulation technology2022
- Author(s)
  Norikazu Suzuki
- Organizer
  Asia Pacific Semiconductor Packaging Symposium
- Invited
- Data Source
  KAKENHI-PROJECT-23K22652
[Presentation] 新しいプロセスダンピングモデルに基づく旋削プロセスの時間領域・周波数領域シミュレーション2021
- Author(s)
  藤中翼，中之宮知樹，鈴木教和，社本英二
- Organizer
  2021年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] プロセスダンピングの影響を考慮した5軸ボールエンドミル切削の時間領域シミュレーション2021
- Author(s)
  塚本有美，鈴木教和，社本英二，入野成広，今別府泰宏
- Organizer
  2021年度精密工学会春季大会，第28回学生会員卒業研究発表講演会
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] 主軸回転速度変動を利用したミリングシミュレーションにおけるパラメータの高速高精度同定2021
- Author(s)
  三輪智，鈴木教和，社本英二，高幣一樹
- Organizer
  2021年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Time domain simulation of dynamic corner milling process considering chatter vibration with finite amplitude2021
- Author(s)
  Norikazu Suzuki, Hiroki Hayashi, Eiji Shamoto, Naruhiro Irino, Yasuhiro Imabeppu
- Organizer
  Proceedings of the ASME 2021 16th International manufacturing Science and Engineering Conference, MSEC2021
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Analytical study on identification of milling simulation parameters by utilizing spindle speed variation method2021
- Author(s)
  Satoshi MIWA, Norikazu SUZUKI, Kazuki TAKAHEI, Eiji SHAMOTO
- Organizer
  The 10th International Conference on Leading Edge Manufacturing Technologies in 21st Century (LEM21)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Time domain simulation of turning process considering amplitude-dependency in process damping2021
- Author(s)
  Tsubasa Fujinaka, Norikazu Suzuki, Tomoki Nakanomiya, Eiji Shamoto
- Organizer
  The 10th International Conference on Leading Edge Manufacturing Technologies in 21st Century (LEM21)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] 切削加工における動的振動現象の解析技術～周波数領域から時間領域まで～2020
- Author(s)
  鈴木教和
- Organizer
  日本機械学会スマートファクトリーにおける生産技術に関する研究分科会 RC279
- Invited
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Chatter Stability Prediction of Cutting Process With Process Damping Utilizing Finite Element Analysis2020
- Author(s)
  Norikazu Suzuki, Tomoki Nakanomiya, Eiji Shamoto
- Organizer
  Proceedings of the international Conference on Leading Edge Manufacturing/Materials & Processing (LEM&P 2020)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Fast parameters identification of process-machine interaction model in milling2020
- Author(s)
  Kazuki Takahei, Ryosuke Ikeda, Tomoya Fujita, Satoshi Miwa, Norikazu Suzuki
- Organizer
  Proceedings of The Japan Society for Precision Engineering, ICPE2020
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Enhancement of Sensor-less Cutting Force Estimation by Tuning of Observer Parameters from Cutting Test2019
- Author(s)
  ShuntaroYamato, Yasuhiro Imabeppu, Naruhiro Irino, Norikazu Suzuki, Yasuhiro Kakinuma
- Organizer
  8th Manufacturing Engineering Society International Conference, MESIC 2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Development of automatic chatter suppression system in parallel milling by real-time control strategy of spindle speed with observer-based chatter monitoring2019
- Author(s)
  S. Yamato, K. Nakanishi, N. Suzuki, Y. Kakinuma
- Organizer
  Proceedings of the 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Fast Identification of Cutting Process with Sensor-Integrated Disturbance Observer2019
- Author(s)
  K. Takahei, S. Ohno, N. Suzuki, E. Shamoto
- Organizer
  Proceedings of 15th International Conference on High Speed Machining (HSM2019) in Czech
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] VARIABLE HELIX CUTTER DESIGN TO SUPPRESS REGENERATIVE EFFECT2019
- Author(s)
  Norikazu Suzuki , Rikiya Ishiguro, Tomoki Morita, Eiji Shamoto
- Organizer
  Proceedings of the ASME 2019 14th International manufacturing Science and Engineering Conference, MSEC2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] 有限要素法解析によるプロセスダンピングパラメータ推定と安定性解析2019
- Author(s)
  中之宮知樹，鈴木教和，社本英二，髙橋亘
- Organizer
  2019年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Improvement in prediction accuracy of polishing pressure distribution in CMP process2018
- Author(s)
  Yohei Hashimoto, Norikazu Suzuki, Hozumi Yasuda, Yoshihiro Mochizuki
- Organizer
  International Conference on Planarization/CMP Technology (ICPT2018 in Seoul Korea)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Ni基耐熱合金の従動式ロータリミリング技術の開発2018
- Author(s)
  加藤裕也，鈴木教和，社本英二，内木幸夫，高木優次
- Organizer
  2018年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] A Novel Technique for In-Situ Observation of Local Polishing Efficiency by Utilizing Infrared Thermography2018
- Author(s)
  Norikazu Suzuki, Takahiro Misono, Shintaro Goto, Eiji Shamoto, Hozumi Yasuda, Yoshihiro Mochizuki
- Organizer
  International Conference on Planarization/CMP Technology (ICPT2018 in Seoul Korea)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 除去加工による3次元積層造形物の後処理技術に関する基礎的研究2018
- Author(s)
  大庭孝之，鈴木教和，社本英二
- Organizer
  2018年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Development of a post-processing system of resin organ models by utilizing 3-axis CNC abrasive machining2018
- Author(s)
  Norikazu Suzuki, Takayuki Ohba, Eiji Shamoto, Masahiro Oda, Kensaku Mori, Yoshimi Takeuchi
- Organizer
  17th International Conference on Precision Engineering (ICPE2018 in Kamakura)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] DEVELOPMENT OF A SPRT MILLING TECHNOLOGY FOR NI-BASED SUPER ALLOY2018
- Author(s)
  Norikazu Suzuki, Yuya Kato, Eiji Shamoto, Yukio Naiki, Yuji Takagi
- Organizer
  2018 International Symposium on Flexible Automation
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Process simulation technology for advanced CMP2018
- Author(s)
  Norikazu Suzuki
- Organizer
  1st Ebara Open Innovation Internatinal Symposium
- Invited
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Simulation-based Concurrent Identification of Milling Process and Mechanical Dynamics with Sensor-integrated Multi-inertial System Disturbance Observer2017
- Author(s)
  K. Takahei, T. Fujita, R. Ikeda, N. Suzuki, S. Ohno, E. Shamoto
- Organizer
  the 9th International Conference on Leading Edge Manufacturing in 21st Century
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 解析技術を活用した切削加工の高度化・知能化2017
- Author(s)
  鈴木教和
- Organizer
  切削加工技術セミナー2017
- Invited
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 切削・研磨加工技術2017
- Author(s)
  鈴木教和
- Organizer
  名古屋大学協力会「研究シーズ提案」セミナー
- Invited
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] DESIGN OF ANISOTROPIC BORING TOOLS WITH L/D = 10 FOR CHATTER FREE CUTTING2017
- Author(s)
  Wataru Takahashi, Norikazu Suzuki, Eiji Shamoto
- Organizer
  ASME 2017 International manufacturing Science and Engineering Conference, MSEC2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 切削加工におけるびびり振動の安定性を向上するロバストな再生振動相殺技術2017
- Author(s)
  鈴木教和
- Organizer
  2017年度精密工学会秋季大会学術講演会
- Invited
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Current issues and research trends on post processing technology in additive manufacturing in Japan2017
- Author(s)
  Norikazu Suzuki
- Organizer
  3rd KSPE 3D Printing Users’ Forum
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] SUPPRESSION OF CHATTER VIBRATION BY UNEQUAL PITCH TURNING APPLYING ESTIMATED CUTTING FORCE2017
- Author(s)
  Shinya Sakata, Takashi Kadota, Yuki Yamada, Kenichi Nakanishi, Hayato Yoshioka, Norikazu Suzuki, Yasuhiro Kakinuma
- Organizer
  ASME 2017 International manufacturing Science and Engineering Conference, MSEC2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 切削加工におけるびびり振動抑制を実現する逃げ面テクスチャの提案2017
- Author(s)
  井桁秀徳，鈴木教和，社本英二
- Organizer
  2017年度精密工学会春季大会学術講演会
- Place of Presentation
  慶応義塾大学
- Year and Date
  2017-03-13
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 切削加工におけるびびり振動の回避技術とプロセス監視技術2017
- Author(s)
  鈴木教和
- Organizer
  設計工学会東海支部　設計フォーラム「設計を支える最新加工技術」
- Invited
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] びびり振動を回避する多段インサートエンドミルのピッチ角設計2017
- Author(s)
  鈴木教和，森田知樹，社本英二
- Organizer
  2017年度砥粒加工学会学術講演会
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] モデルベース逆解析を利用したミリングプロセスのセンサレス推定2017
- Author(s)
  大野彰也，池田遼輔，鈴木教和，社本英二
- Organizer
  2017年砥粒加工学会卒業研究発表会
- Place of Presentation
  ホテルプラザ勝川
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] CMPプロセスにおける研磨シミュレーション技術と応用2017
- Author(s)
  鈴木教和
- Organizer
  次世代固定砥粒加工プロセス専門委員会　第76回研究会
- Invited
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Influence of flank face interference on micro/nano structure fabrication in elliptical vibration cutting2017
- Author(s)
  張建国，鈴木教和，社本英二
- Organizer
  2017年度砥粒加工学会学術講演会
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Improvement of material removal efficiency by optimization of anisotropic contact of pad asperities2017
- Author(s)
  Norikazu Suzuki, Shingo Oshika, Hirotaka Misono, Yohei Hashimoto, Hozumi Yasuda, Yoshihiro Mochizuki
- Organizer
  International Conference on Planarization/CMP Technology (ICPT2017)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] ボールねじ駆動系の多慣性モデルを考慮した外乱力推定と切削シミュレーションを利用したミリングプロセスの知的同定2017
- Author(s)
  大野彰也，鈴木教和，社本英二，池田遼輔，高幣一樹，藤田智哉
- Organizer
  2017年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 切削加工におけるびびり振動のメカニズムとその対策2017
- Author(s)
  鈴木教和
- Organizer
  とやま先端材料加工技術研究会　平成29年度第2回難削材加工WG研究会
- Invited
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] ミリングにおける外乱力推定と切削シミュレーションを利用した知的プロセス同定2017
- Author(s)
  池田遼輔，鈴木教和，社本英二
- Organizer
  2017年度精密工学会春季大会学術講演会
- Place of Presentation
  慶応義塾大学
- Year and Date
  2017-03-13
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] モデルベースシミュレーションを利用した知的切削プロセス同定技術の開発2016
- Author(s)
  鈴木教和，池田遼輔，社本英二
- Organizer
  第１７回国際工作機械技術者会議ポスターセッション
- Place of Presentation
  東京ビッグサイト
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] CNCの内部情報を利用した柔軟な機械構造を伴うエンドミルプロセスのモデルベースパラメータ同定2016
- Author(s)
  池田遼輔，鈴木教和，社本英二
- Organizer
  第17回公益社団法人計測自動制御学会システムインテグレーション部門　講演会　SI2016
- Place of Presentation
  札幌コンベンションセンター
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 不等リードエンドミルを用いた切削プロセスのSemidiscrete time domain solution2016
- Author(s)
  石黒力也，鈴木教和，社本英二
- Organizer
  2016年度精密工学会春季大会学術講演会
- Place of Presentation
  東京理科大
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 難削材加工に適応可能な従動式ロータリミーリンク工具の開発2016
- Author(s)
  加藤裕也，鈴木教和，社本英二，内木幸夫，高木優次
- Organizer
  日本機械学会第11回生産加工・工作機械部門講演会
- Place of Presentation
  名古屋大学
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 切削加工における自励振動現象とその安定性解析および制御2016
- Author(s)
  鈴木教和
- Organizer
  東海ダイナミクス・制御研究会
- Place of Presentation
  岐阜大学サテライトキャンパス
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] サーボ系の外乱力推定と切削シミュレーションを利用したモデルベースプロセス同定2016
- Author(s)
  池田遼輔，鈴木教和，社本英二
- Organizer
  2016年度精密工学会春季大会学術講演会
- Place of Presentation
  東京理科大
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 推定切削力を応用した不等ピッチターニングによるびびり振動抑制2016
- Author(s)
  門田崇志，山田雄基，中西賢一，橘純司，吉岡勇人，鈴木教和，柿沼康弘
- Organizer
  日本機械学会第11回生産加工・工作機械部門講演会
- Place of Presentation
  名古屋大学
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 有限の振動変位を持つびびり振動を考慮した切削力モデルに関する基礎研究2016
- Author(s)
  井桁秀徳，鈴木教和，社本英二
- Organizer
  2016年度精密工学会秋季大会学術講演会
- Place of Presentation
  茨城大学
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Primitive study on model-based process identification by utilizing force estimation techniques2016
- Author(s)
  Norikazu SUZUKI, Ryosuke IKEDA, Eiji SHAMOTO
- Organizer
  Proceedings of the ASME 2016 International manufacturing Science and Engineering Conference, MSEC2016
- Place of Presentation
  Virginia Tech
- Year and Date
  2016-06-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 切削モデルに基づく解析技術とプロセス同定2015
- Author(s)
  鈴木教和
- Organizer
  2015年度精密工学会春季大会シンポジウム
- Place of Presentation
  東洋大学
- Year and Date
  2015-03-19
- Invited
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] CNCの内部情報を利用した機械構造伝達関数の新しい推定法2015
- Author(s)
  池田遼輔，鈴木教和，佐野憲司，社本英二
- Organizer
  2015年度精密工学会秋季大会学術講演会
- Place of Presentation
  東北大学
- Year and Date
  2015-09-04
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] A NEW CONTACT MODEL OF PAD SURFACE ASPERITIES UTILIZING MEASURED GEOMETRICAL FEATURES2015
- Author(s)
  Yohei Hashimoto, Shingo Oshika, Norikazu Suzuki, Eiji Shamoto
- Organizer
  ICPT2015 in Arizona
- Place of Presentation
  Arizona, US
- Year and Date
  2015-09-30
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] ロバストなびびり振動抑制を実現する工具設計理論の実験的検証2015
- Author(s)
  石黒力也，鈴木教和，小島拓也，社本英二
- Organizer
  日本機械学会2015年度年次大会
- Place of Presentation
  北海道大学
- Year and Date
  2015-09-13
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] Estimation of transfer function of flexible mechanical structures by utilizing cutting force model and observer technique2015
- Author(s)
  Norikazu SUZUKI, Ryosuke IKEDA, Kenji SANO and Eiji SHAMOTO
- Organizer
  LEM21 in Kyoto
- Place of Presentation
  Kyoto
- Year and Date
  2015-10-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] オブザーバ技術と動的切削力推定を利用した柔軟構造伝達特性の推定2015
- Author(s)
  池田遼輔，鈴木教和，社本英二
- Organizer
  計測自動制御学会　システムインテグレーション部門　講演会
- Place of Presentation
  名古屋国際会議場
- Year and Date
  2015-12-14
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 旋削加工におけるプロセスダンピングのびびり振動の安定性に対する影響2014
- Author(s)
  内山大輔，鈴木教和，社本英二
- Organizer
  精密工学会
- Place of Presentation
  東京大学
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 研磨圧力シミュレーションにおいて各種モデル化が解析精度に与える影響2014
- Author(s)
  橋本洋平，鈴木教和，沈閲，社本英二
- Organizer
  2014年度精密工学会秋季大会学術講演会
- Place of Presentation
  鳥取大学
- Year and Date
  2014-09-17
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 耐熱合金の高速セラミックミーリングにおける工具損耗メカニズム2014
- Author(s)
  鈴木教和，延命里紗，橋本洋平，社本英二，波多野祐規
- Organizer
  2014年度精密工学会秋季大会学術講演会
- Place of Presentation
  鳥取大学
- Year and Date
  2014-09-16
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 難削材の切削加工－セラミックミリングとロータリーミリング－2014
- Author(s)
  鈴木教和
- Organizer
  日本機械学会生産加工・工作機械部門次世代産業を牽引する工作機械に関する研究分科会
- Place of Presentation
  名古屋大学
- Year and Date
  2014-10-10
- Invited
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 切削加工におけるびびり振動を抑制するための柔軟構造の動剛性設計2014
- Author(s)
  鈴木教和，渡邉涼，西村浩平，社本英二
- Organizer
  第15回計測自動制御学会システムインテグレーション部門講演会
- Place of Presentation
  東京ビッグサイト
- Year and Date
  2014-12-17
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 楕円振動切削における振幅変調法を利用した焼入れ鋼のナノ精度微細加工2014
- Author(s)
  鈴木教和，張建国，社本英二
- Organizer
  日本機械学会第10回生産加工・工作機械部門講演会
- Place of Presentation
  徳島大学
- Year and Date
  2014-11-15
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 超音波楕円振動切削による高硬度材料の超精密・微細加工2014
- Author(s)
  鈴木教和
- Organizer
  長野県精密加工技術研究会
- Place of Presentation
  長野県工業技術総合センター
- Year and Date
  2014-10-29
- Invited
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] High efficiency elliptical vibration cuttign of steel using large nose radius single crystal diamond tool2014
- Author(s)
  Yilong Wang, Norikazu Suzuki, Eiji Shamoto
- Organizer
  精密工学会
- Place of Presentation
  東京大学
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] Polishing pressure distribution analysis in CMP process with airbag type polishing head2013
- Author(s)
  Norikazu Suzuki, Masakazu Asaba, Akimitsu Kato, Eiji Shamoto, Hozumi Yasuda, Satoru Yamaki
- Organizer
  International Conference on Planarization/CMP Technology
- Place of Presentation
  Hsinchu, Taiwan
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] Identification of Nonlinear Viscoelasticity of CMP Pads2013
- Author(s)
  Norikazu Suzuki, Akimitsu Kato, Masakazu Asaba, Eiji Shamoto
- Organizer
  Advanced Metallization Conference
- Place of Presentation
  Tokyo, Japan
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 従動式ロータリ工具を用いた難削材のミリンダ加工に関する研究2012
- Author(s)
  安然, 鈴木教和, 社本英二, 鵜飼晃太, 吉田浩之, 長谷川侑, 石川陽一, 山田祥雄
- Organizer
  精密工学会春季大会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2012-03-15
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] Identification of Nonlinear Viscoelasticity of Polishing Pad Using an On-Machine Compression Tester2012
- Author(s)
  Norikazu Suzuki
- Organizer
  ICPT2012 (International Conference on Planarization/CMP Technology)
- Place of Presentation
  Grenoble, France
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] 進行波を利用した非接触流体軸受に関する研究-モジュール式の進行波圧電アクチュエータ及び精密スライダの開発2012
- Author(s)
  小松裕貴, 加藤大香士, Sencer Burak, 鈴木教和, 社本英二
- Organizer
  精密工学会春季大会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] 複数モードの再生効果を同時抑制する不等ピッチ工具の新しい設計法2012
- Author(s)
  小島拓也, 鈴木教和, 社本英二
- Organizer
  精密工学会春季大会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2012-03-16
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] 工具軌跡/姿勢の最適化による再生びびり振動回避に関する研究一回避手法の提案と旋削加工への応用2012
- Author(s)
  社本英二, 藤巻俊介, 鈴木教和
- Organizer
  精密工学会春季大会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] 進行波を利用した非接触流体軸受に関する研究- モジュール式の進行波圧電アクチュエータ及び精密スライダの開発2012
- Author(s)
  小松裕貴,加藤大香士, Sencer Burak,鈴木教和,社本英二
- Organizer
  精密工学会春季大会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] Ultraprecision sculpturing of hardened steel by applying elliptical vibration cutting2012
- Author(s)
  Norikazu Suzuki
- Organizer
  2012 JSPE spring meeting
- Place of Presentation
  Tokyo Metropolitan University (Japan)(招待講演)
- Year and Date
  2012-03-15
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] Consideration of Nonlinear Elasticity of Polishing Pad in CMP analysis2011
- Author(s)
  N.Suzuki
- Organizer
  International Conference on Planarization/CMP Technology (ICPT 2011)
- Place of Presentation
  Seoul (Korea)
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] Consideration of Nonlinear Elasticity of Polishing Pad in CMP analysis2011
- Author(s)
  N. Suzuki, Y. Hashimoto, M. Asaba, E. Shamoto
- Organizer
  Proceedings of International Conference on Planarization/CMP Technology(ICPT2011)
- Place of Presentation
  Seoul(Korea)
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] Development of High Performance Nano Sculpturing System for Steel Materials by using Elliptical Vibration Cutting2010
- Author(s)
  N. Suzuki, H. Yokoi, R. Hino, E. Shamoto
- Organizer
  Proceedings of the 2nd International Conference of Process Machine Interactions(PMI2010)
- Place of Presentation
  UBC(Canada)
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] Chatter Stability in Turning with In Process Identified Process Damping2010
- Author(s)
  Y. Kurata, S. D. Merdol, Y. Altintas, N. Suzuki, E. Shamoto
- Organizer
  Proceedings of the 4th CIRP International Conference on High Performance Cutting(HPC2010)
- Place of Presentation
  Gifu(Japan)
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] Development of Mirror Surface Finishing Technology for Sculptured Steel Molds2010
- Author(s)
  Norikazu Suzuki
- Organizer
  The 4th international CIRP high performance cutting conference
- Place of Presentation
  Nagaragawa Convention Center, Gifu, Japan
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] 旋削加工における再生型びびり振動の安定限界解析2010
- Author(s)
  大塚由佳, 鈴木教和, 社本英二
- Organizer
  2010年度精密工学会春季大会,第17回学生会員卒業研究発表講演会講演論文集
- Place of Presentation
  埼玉大学
- Year and Date
  2010-03-16
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] Proposal of Schedule-Based Path Planning for Automated Vehicles Guided by Uni-directed Rails2010
- Author(s)
  R. Hino, T. Hosoi, N. Suzuki and E. Shamoto
- Organizer
  International Symposium on Flexible Automation(CDROM)
- Place of Presentation
  Tokyo(Japan)
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] Ultrasonic elliptical vibration cutting of plasma nitriding steel2010
- Author(s)
  Y. WANG, N. SUZUKI, E. SHAMOTO, Q. ZHAO
- Organizer
  Proceedings of the 4th CIRP International Conference on High Performance Cutting(HPC2010)
- Place of Presentation
  Gifu(Japan)
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] 不等ピッチ工具を用いたボーリング加工の自励びびり振動安定限界2010
- Author(s)
  倉田祐輔, 鈴木教和, 社本英二
- Organizer
  20010年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  埼玉大学
- Year and Date
  2010-03-16
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] Development of Mirror Surface Finishing Technology for Sculptured Steel Molds2010
- Author(s)
  N. Suzuki, H. Yokoi, E. Shamoto, S. Hamada, T. Ueyama
- Organizer
  Proceedings of the 4th CIRP International Conference on High Performance Cutting(HPC2010)
- Place of Presentation
  Gifu(Japan)
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] 多段振動型気体軸受の提案2010
- Author(s)
  社本英二,小松裕貴,山路文恵,大脇圭裕,鈴木教和
- Organizer
  精密工学会秋季大会
- Place of Presentation
  名古屋大学(愛知県)
- Year and Date
  2010-09-28
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] Dynamic Structural Analysis of CMP Process Using ALE Method2010
- Author(s)
  Norikazu Suzuki
- Organizer
  ICPT 2010 in Arizona
- Place of Presentation
  Arizona, Phenix, USA
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] 不等ピッチ工具を用いたボーリング加工の自励びび振動安定限界2010
- Author(s)
  倉田祐輔, 鈴木教和, 社本英二
- Organizer
  2010年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  埼玉大学
- Year and Date
  2010-03-16
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] Development of Ultra-precision Nano Sculpturing System for Steel materials by using Elliptical Vibration Cutting2010
- Author(s)
  Norikazu Suzuki
- Organizer
  The 2nd International Conference of Process Machine Interactions (PMI2010)
- Place of Presentation
  UBC, Vancouver, Canada
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] Prediction of Chatter-Free Cutting Conditions for High Performance Boring Operation2010
- Author(s)
  Y. KURATA, N. SUZUKI, R. HINO, E. SHAMOTO
- Organizer
  Proceedings of the 2nd International Conference of Process Machine Interactions(PMI2010)
- Place of Presentation
  UBC(Canada)
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] Dynamic Structural Analysis of CMP Process Using ALE Method2010
- Author(s)
  N. Suzuki, Y. Hashimoto, R. Hino, E. Shamoto
- Organizer
  Proceedings of International Conference on Planarization/CMP Technology(ICPT2010)
- Place of Presentation
  Arizona(USA)
- Data Source
  KAKENHI-PROJECT-22760097
[Presentation] 旋削加工における再生型びびり振動の安定限界解析2010
- Author(s)
  大塚由佳, 鈴木教和, 社本英二
- Organizer
  2010年度精密工学会春季大会, 第17回学生会員卒業研究発表講演会講演論文集
- Place of Presentation
  埼玉大学
- Year and Date
  2010-03-16
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] 板材に対する高精度高能率加工を実現する両面同時フライス加工技術の開発-左右主軸回転数差による再生型びびり振動の抑制-2009
- Author(s)
  社本英二, 西村浩平, 倉田祐輔, 鈴木教和, 森達也
- Organizer
  2009年度精密工学会春季大会学術講演会
- Place of Presentation
  中央大学
- Year and Date
  2009-03-12
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] 200kHzの高周波楕円振動工具の開発2009
- Author(s)
  鈴木教和, 丸小慶介, 社本英二
- Organizer
  日本機械学会東海支部第58期総会講演会
- Place of Presentation
  岐阜大学
- Year and Date
  2009-03-18
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 板材に対する高精度高能率加工を実現する両面同時フライス加工技術の開発-左右主軸回転数差による再生型びびり振動の抑制-2009
- Author(s)
  社本英二, 西村浩平, 倉田祐輔, 鈴木教和, 森達也
- Organizer
  2009年度精密工学会春季大会学術講演会
- Place of Presentation
  中央大学
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 板材に対する高精度高能率加工を実現する両面同時フライス加工技術の開発-左右主軸回転数差による再生型びびり振動の抑制-2009
- Author(s)
  社本英二, 西村浩平, 倉田祐輔, 鈴木教和, 森達也
- Organizer
  2009年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  中央大学
- Year and Date
  2009-03-12
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] プロセスダンピングを考慮した再生型びびり振動の高精度解析-びびり振動の逆解析によるプロセスダンピング変数の同定2009
- Author(s)
  倉田祐輔, S.D. Merdol, Y. Altintas, 鈴木教和, 社本英二
- Organizer
  2009年度精密工学会秋季大会学術講演会講演論文集
- Place of Presentation
  神戸大学
- Year and Date
  2009-09-11
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] 200kHzの高周波楕円振動工具の開発2009
- Author(s)
  鈴木教和, 丸小慶介, 社本英二
- Organizer
  日本機械学会東海支部第58期総会講演会
- Place of Presentation
  岐阜大学
- Year and Date
  2009-03-18
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] A New Method to Control Work-in-Process Inventory for High Manufacturing Productivity2008
- Author(s)
  Rei Hino, Norikazu Suzuki, Eiji Shamoto
- Organizer
  The 41st CIRP Conference on Manufacturing Systems
- Place of Presentation
  東京大学
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 再生型びびり振動の逆解析を利用した伝達関数の同定2008
- Author(s)
  鈴木教和, 倉田祐輔, 社本英二
- Organizer
  第13回国際工作機械技術者会議
- Place of Presentation
  東京ビックサイト
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] びびり振動の解析と応用2008
- Author(s)
  鈴木教和
- Organizer
  日本機械学会生産加工・工作機械部門多軸複合工作機械の高度化技術に関する研究分科会RC240
- Place of Presentation
  名古屋大学
- Year and Date
  2008-09-12
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] 自励型びびり振動における再生効果とモードカップリング2008
- Author(s)
  倉田祐輔, 鈴木教和, 社本英二
- Organizer
  2008年度精密工学会秋季大会学術講演会
- Place of Presentation
  東北大学
- Year and Date
  2008-09-19
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] Development of Elliptical Vibration Cutting Technology and Its Application to Ultraprecision/ Micro Machining of Hard /Brittle Materials2008
- Author(s)
  Eiji Shamoto, Norikazu Suzuki
- Organizer
  6th CHINA-JAPAN international Conference on Ultra-Precision Machining
- Place of Presentation
  Hunan University, Changsha, China
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] Mohammad Javad Nategh : FE Analysis of One Directional and Elliptical Ultrasonic Vibration-Assisted Cutting of IN7382008
- Author(s)
  Saiid Amini, Eiji Shamoto, Norikazu Suzuki
- Organizer
  International Conference on Advances in Materials and Processing Technologies 2008 (AMPT2008)
- Place of Presentation
  Manama, Kingdom of Bahrain
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] Identification of transfer function of mechanical structure by inverse analysis of regenerative chatter vibration in end milling2008
- Author(s)
  Norikazu SUZUKI, Yusuke KURATA, Rei HINO, Eiji SHAMOTO
- Organizer
  the 3rd international CIRP high performance cutting conference
- Place of Presentation
  Dublin, Ireland
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] FE Analysis of One Directional and Elliptical Ultrasonic Vibration-Assisted Cutting of IN7382008
- Author(s)
  Saiid Amini, Eiji Shamoto, Norikazu Suzuki, Mohammad Javad Nategh
- Organizer
  International Conference on Advances in Materials and Processing Technologies 2008 (AMPT2008)
- Place of Presentation
  Manama, Kingdom of Bahrain
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] Elliptical Vibration Cutting of Hard Mold Materials2008
- Author(s)
  Eiji Shamoto and Norikazu Suzuki
- Organizer
  OSA's 92nd Annual Meeting and Exhibit
- Place of Presentation
  Rochester NY, USA
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 楕円振動切削によるタングステン合金の超精密微細加工(第3報)-工具寿命の延長に関する検討-2008
- Author(s)
  鈴木, 江端, 社本
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  明治大学
- Year and Date
  2008-03-17
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 自励型びびり振動における再生効果とモードカップリング2008
- Author(s)
  倉田祐輔, 鈴木教和, 社本英二
- Organizer
  2008年度精密工学会秋季大会学術講演会講演論文集
- Place of Presentation
  東北大学
- Year and Date
  2008-09-19
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] 再生型びびり振動の逆解析を利用した伝達関数の同定2008
- Author(s)
  鈴木教和, 倉田祐輔, 社本英二
- Organizer
  第13回国際工作機械技術者会議論文集
- Place of Presentation
  東京ビックサイト
- Year and Date
  2008-11-01
- Data Source
  KAKENHI-PROJECT-20760083
[Presentation] Development of Elliptical Vibration Cutting Technology and Its Application to Ultraprecision / Micro Machining of Hard / Brittle Materials2008
- Author(s)
  Eiji Shamoto and Norikazu Suzuki
- Organizer
  6th CHINA-JAPAN international Conference on Ultra-Precision Machining
- Place of Presentation
  Hunan University, Changsha, China
- Year and Date
  2008-11-24
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 楕円振動切削によるタングステン合金の超精密微細加工(第3報)-工具寿命の延長に関する検討2008
- Author(s)
  鈴木, 江端, 社本
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  明治大学
- Year and Date
  2008-03-17
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 放物線振動切削加工法の提案2007
- Author(s)
  社本, 鈴木, 菊地, 土屋, 浜田
- Organizer
  2007年度精密工学会秋季大会学術講演会
- Place of Presentation
  北海道旭川市
- Year and Date
  2007-09-12
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 難削材の高能率加工を実現する革新的ロータリミリング工具の開発
- Author(s)
  鈴木教和，鈴木徹，社本英二，山崎真，堀池伸和
- Organizer
  第16回国際工作機械技術者会議　ポスターセッション
- Place of Presentation
  東京ビッグサイト
- Year and Date
  2014-11-01 – 2014-11-02
- Data Source
  KAKENHI-PROJECT-25289015

1. SHAMOTO Eiji (20216146)

# of Collaborated Projects: 11 results

# of Collaborated Products: 113 results
2. HINO Rei (80273762)

# of Collaborated Projects: 6 results

# of Collaborated Products: 22 results
3. 畝田道雄 (00298324)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. 柿沼康弘

# of Collaborated Projects: 0 results

# of Collaborated Products: 2 results
5. 橋本洋平

# of Collaborated Projects: 0 results

# of Collaborated Products: 2 results
6. SENCER Burak

# of Collaborated Projects: 0 results

# of Collaborated Products: 9 results

Suzuki Norikazu 鈴木 教和

SUZUKI Norikazu 鈴木 教和

Research Projects

Research Products

Co-Researchers

アクティブプロセス制御を実現する革新的揺動ミリング加工法の提案Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

次世代CMPプロセスを拓くデジタルツイン基盤とサイバーフィジカルシステムの開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Design of cutting tool flank texture that overturns the conventional limit in chatter stabilityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

A novel model-based process monitoring for next-generation cutting technologyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Cutter design of irregular pitch / variable helix end mills to increase chatter stability in cuttingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Proposal of novel chatter suppression method by utilizing anisotropic dynamicsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of next generation machine tool to enable automatic chatter avoidancePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

焼結材料の延性モード加工を可能とする超高周波振動切削加工に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Suzuki Norikazu 鈴木教和

SUZUKI Norikazu 鈴木教和