Murakami Hiroshi 村上洋

… Alternative Names

MURAKAMI Hiroshi 村上洋

Less

Researcher Number	00416512
Other IDs
Affiliation (Current)	2026: 北九州市立大学, 国際環境工学部, 教授
Affiliation (based on the past Project Information) *help	2023 – 2024: 北九州市立大学, 国際環境工学部, 教授 2014 – 2022: 北九州市立大学, 国際環境工学部, 准教授 2012: 北九州市立大学, 国際環境工学部, 准教授 2010 – 2011: 九州産業大学, 工学部, 講師 2009: Kagoshima University, 大学院・理工学研究科(工学系), 助教 … More 2009: Kagoshima University, 理工学研究科(工学系), 助教 2008: Kagoshima University, 工学部, 助教 2007: Fukuoka Industrial Technology Center, 福岡県工業技術センター, 主任技師 Less
Review Section/Research Field	Principal Investigator Basic Section 18020:Manufacturing and production engineering-related / Production engineering/Processing studies / Measurement engineering
Keywords	Principal Investigator 微細形状測定 / 光ファイバ / 小径穴測定 / 測定 / ファブリ・ペロー干渉 / スタイラス / レーザ / 光ファイバプローブ / バーニア効果 / プローブ … More / 小径穴 / 光ファイバスタイラス / CO2レーザ加工 / 微細形状 / CO２レーザ / スピンドル / 誤差解析 / 主軸回転誤差 / ロッド・ボールレンズ / 回転誤差 / 高速マイクロスピンドル / フぁイバプローブ / ファイバプローブ / 穴 / 繰り返し性 / 精度 / 深穴 / 微小径穴 Less

Research Projects
(6 results)
Research Products
(68 results)

微細形状測定用ファブリ・ペロー方式光ファイバプローブの小径化および高分解能化Principal Investigator
- Principal Investigator
  
  村上洋
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  The University of Kitakyushu
Development of a stylus with a Fabry-Perot interferometer built into an optical fiber tip for microstructure measurementPrincipal Investigator
- Principal Investigator
  
  Murakami Hiroshi
- Project Period (FY)
  2021 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  The University of Kitakyushu
Fabrication method of an L-shaped stylus with a sharp tip and a standard type stylus for measuring micro hole and wall roughnessPrincipal Investigator
- Principal Investigator
  
  Murakami Hiroshi
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  The University of Kitakyushu
Development of a System for 3-D Micro Metrology Using a Nano Order Diameter Optical Fiber ProbePrincipal Investigator
- Principal Investigator
  
  Murakami Hiroshi
- Project Period (FY)
  2014 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Measurement engineering
- Research Institution
  The University of Kitakyushu
Simple and simultaneous measurement of five-degrees-of-freedom error motions of high-speed microspindlePrincipal Investigator
- Principal Investigator
  
  MURAKAMI Hiroshi
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  The University of Kitakyushu
  Kyushu Sangyo University
Development of a Micro Hole Measuring System Using an Optical Fiber ProbePrincipal Investigator
- Principal Investigator
  
  MURAKAMI Hiroshi
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kagoshima University
  Fukuoka Industrial Technology Center

[Journal Article] Resolution enhancement of Fabry-Perot optical fiber probe for microstructure measurement2024
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima, and Tatsumi Yoshimatsu
- Journal Title
  
  Proceedings of the euspen international conferece
  
  Volume: -
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24K07272
[Journal Article] Development of a two-step stylus with elastic hinge for microstructure measurement to improve sensitivity and vibration characteristics2023
- Author(s)
  Murakami Hiroshi、Murakami Hiroki、Katsuki Akio、Sajima Takao、Uchiyama Kosuke
- Journal Title
  
  Precision Engineering
  
  Volume: 80 Pages: 72-81
- DOI
  10.1016/j.precisioneng.2022.11.015
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21K03808
[Journal Article] Development of a High-Function Fiber Stylus for Microstructure Measurement with Water-Repellent and Antistatic Coatings2023
- Author(s)
  Murakami Hiroshi、Uchiyama Kosuke、Katsuki Akio、Sajima Takao、Fujiyoshi Kunitaka
- Journal Title
  
  Applied Sciences
  
  Volume: 13 Issue: 3 Pages: 1260-1260
- DOI
  10.3390/app13031260
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-21K03808
[Journal Article] Development of a Sharp-Tipped L-Shaped Stylus for Measurement of Nanoscale Sidewall Features2022
- Author(s)
  Uchiyama Kosuke、Murakami Hiroshi、Katsuki Akio、Sajima Takao、The University of Kitakyushu 1-1 Hibikino, Wakamatsu-ku, Kitakyushu-shi, Fukuoka 808-0135, Japan、Kyushu University, Fukuoka, Japan
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 16 Issue: 4 Pages: 489-496
- DOI
  10.20965/ijat.2022.p0489
- ISSN
  1881-7629, 1883-8022
- Year and Date
  2022-07-05
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21K03808
[Journal Article] 微細形状測定機用マイクロファイバスタイラスの製作技術2022
- Author(s)
  村上洋
- Journal Title
  
  精密工学会誌
  
  Volume: 88 Pages: 678-683
- Data Source
  KAKENHI-PROJECT-21K03808
[Journal Article] Investigation of Factors Affecting Sensitivity Enhancement of an Optical Fiber Probe for Microstructure Measurement Using Oblique Incident Light2020
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima, Kosuke Uchiyama, Ichiro Yoshida, Yasuo Hamano, Hiroshi Honda
- Journal Title
  
  applied sciences
  
  Volume: 10 Issue: 9 Pages: 3191-3191
- DOI
  10.3390/app10093191
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18K03879
[Journal Article] Development of measurement system for microstructures using an optical fiber probe: improvement of measurable region and depth2020
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima, Kosuke Uchiyama, Ichiro Yoshida, Yasuo Hamano, Hiroshi Honda
- Journal Title
  
  Measurement Science and Technology
  
  Volume: 31 Issue: 7 Pages: 075902-075902
- DOI
  10.1088/1361-6501/ab7efc
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K03879
[Journal Article] Fabrication of an ultra-small-diameter optical fiber probe using an acid-etch technique and a CO2 laser for 3D micro metrology2017
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima and Kosuke Uchiyama
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: Vol.11, No.5 Pages: 700-706
- NAID
  130007505915
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26420392
[Journal Article] Reduction of Liquid Bridge Force for 3D2016
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima, Mitsuyoshi Fukuda
- Journal Title
  
  Applied Science
  
  Volume: 6, 153 Issue: 5 Pages: 1-11
- DOI
  10.3390/app6050153
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26420392
[Journal Article] Development of Touch Probing System Using a Fiber Stylus2016
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima
- Journal Title
  
  Fibers
  
  Volume: 4, 24 Issue: 3 Pages: 1-13
- DOI
  10.3390/fib4030024
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26420392
[Journal Article] 極小径光ファイバプローブを用いた微小径穴形状精度測定装置の開発2015
- Author(s)
  村上洋
- Journal Title
  
  機械技術
  
  Volume: Vol.63, No.6 Pages: 23-25
- Data Source
  KAKENHI-PROJECT-26420392
[Journal Article] Study of a Vibrating Fiber Probing System for 3-D Microstructure: Performance Improvement2014
- Author(s)
  Hiroshi MURAKAMI, Akio KATSUKI, Takao SAJIMA, Takuya SUEMATSU
- Journal Title
  
  Measurement Science and Technology
  
  Volume: 25 Pages: 094010-094010
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26420392
[Journal Article] Development of a System for 3-D Micro Metrology Using an Ultra-Small-Diameter Optical Fiber Probe2014
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima, Narumi Tokuoh, Mitsuyoshi Fukuda
- Journal Title
  
  Proceedings of the 29th Annual Meeting of the American Society for Precision Engineering
  
  Volume: 59 Pages: 63-66
- NAID
  40021394486
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26420392
[Journal Article] Optical Technique to Measure Five-Degree-of-Freedom Error Motions for a High-Speed Microspindle2010
- Author(s)
  Hiroshi Murakami, Norio Kawagoishi, Eiji Kondo, Akira Kodama
- Journal Title
  
  International Journal of Precision Engineering and Manufacturing
  
  Volume: Vol.11, No.6 Pages: 845-850
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760100
[Journal Article] Optical Technique to Measure Five-Degree-of-Freedom Error Motions for a High-Speed Microspindle2010
- Author(s)
  Hiroshi MURAKAMI,Norio KAWAGOISHI, Eiji KONDO, Akira KODAMA
- Journal Title
  
  International Journal of Precision Engineering and Manufacturing
  
  Volume: Vol.11,No.6 Pages: 845-850
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760100
[Journal Article] 光ファイバプローブを用いた微小径穴の形状精度測定技術2010
- Author(s)
  村上洋, 甲木昭雄, 鬼鞍宏猷, 佐島隆生, 皮籠石紀雄, 近藤英二
- Journal Title
  
  光アライアンス 21(2)
  
  Pages: 55-58
- NAID
  40016979080
- Data Source
  KAKENHI-PROJECT-19760096
[Journal Article] 光ファイバプローブを用いた微小怪穴の形状精度測定技術2010
- Author(s)
  村上洋
- Journal Title
  
  光アライアンス 21-2
  
  Pages: 55-58
- Data Source
  KAKENHI-PROJECT-19760096
[Journal Article] 光ファイバプローブを用いた微小径穴形状精度測定システムの開発(第1報)-光学的解析および精度評価-2009
- Author(s)
  村上洋, 甲木昭雄, 鬼鞍宏猷, 佐島隆生, 近藤英二
- Journal Title
  
  精密工学会誌 75(12)
  
  Pages: 1476-1481
- NAID
  130000421559
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760096
[Journal Article] Development of a Measuring System for Micro Hole Accuracy Using an Optical Fiber Probe-Evaluation of Measurement Repeatability-2009
- Author(s)
  Hiroshi MURAKAMI
- Journal Title
  
  Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century
  
  Pages: 763-768
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760096
[Journal Article] Development of a Measuring System for Micro Hole Accuracy Using an optical fiber probe : Accuracy evaluation2009
- Author(s)
  Hiroshi MURAKAMI
- Journal Title
  
  Proceedings of the euspen International Conference Vol.2
  
  Pages: 215-218
- Data Source
  KAKENHI-PROJECT-19760096
[Journal Article] 光ファイバプローブを用いた微小径穴形状精度測定システムの開発(第1報)-光学的解析および精度評価-2009
- Author(s)
  村上洋
- Journal Title
  
  精密工学会誌 75-12
  
  Pages: 1476-1481
- NAID
  130000421559
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760096
[Journal Article] オートコリメーション方式深穴形状精度測定システムの開発 (第2報)-装置の試作および評価実験-2008
- Author(s)
  村上洋, 甲木昭雄, 鬼鞍宏猷, 佐島隆生
- Journal Title
  
  精密工学会誌 74巻・5号
  
  Pages: 504-508
- NAID
  110006668364
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760096
[Journal Article] Development of a Measuring System for a Micro Hole : Using an Optical Fiber Probe2008
- Author(s)
  Hiroshi MURAKAMI, Akio KATSUKI, Hiromichi ONIKURA, Takan SATTMA
- Journal Title
  
  Proceedings of the Twenty-third Annual ASPE Meeting & 12^<th> ICPE Vol.43
  
  Pages: 340-343
- Data Source
  KAKENHI-PROJECT-19760096
[Journal Article] オートコリメーション方式深穴形状精度測定システムの開発 (第3報)-真円度, 円筒度および真直度の測定-2008
- Author(s)
  村上洋, 甲木昭雄, 鬼鞍宏猷, 佐島隆生
- Journal Title
  
  精密工学会誌 74巻・11号
  
  Pages: 1220-1224
- NAID
  110006990564
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760096
[Patent] 形状測定装置2017
- Inventor(s)
  吉田一朗、村上洋、浜野康雄、本田裕
- Industrial Property Rights Holder
  吉田一朗、村上洋、浜野康雄、本田裕
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2017-040562
- Filing Date
  2017-03-03
- Data Source
  KAKENHI-PROJECT-26420392
[Patent] 回転精度測定方法及び測定装置2009
- Inventor(s)
  村上洋,皮籠石紀雄,近藤英二
- Industrial Property Rights Holder
  鹿児島大学
- Industrial Property Number
  2009-158912
- Filing Date
  2009
- Data Source
  KAKENHI-PROJECT-22760100
[Patent] 形状測定装置および測定方法2007
- Inventor(s)
  村上洋, 林宏光
- Industrial Property Rights Holder
  村上洋, 林宏光
- Industrial Property Number
  2007-269005
- Filing Date
  2007-10-16
- Data Source
  KAKENHI-PROJECT-19760096
[Patent] 特許2007
- Inventor(s)
  村上洋林宏光
- Industrial Property Rights Holder
  福岡県
- Industrial Property Number
  2007-269005
- Filing Date
  2007-10-16
- Data Source
  KAKENHI-PROJECT-19760096
[Presentation] Resolution enhancement of Fabry-Perot optical fiber probe for microstructure measurement2024
- Author(s)
  Hiroshi Murakami Akio Katsuki Takao Sajima and Tatsumi Yoshimatsu
- Organizer
  euspen's International Conference & Exhibition 2024
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21K03808
[Presentation] ファブリ・ペロー方式微細形状測定用光ファイバプローブの開発ー試作および性能評価ー2022
- Author(s)
  村上洋，甲木昭雄，佐島隆生，服部佑美
- Organizer
  2022年度精密工学会精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-21K03808
[Presentation] Development of a Micro Contact Sensor with a Fabry-Perot Interferometer Built into an Optical Fiber Tip2022
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima, Yumi Hattori
- Organizer
  27th International Conference on Optical Fiber Sensors
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21K03808
[Presentation] ファブリ・ペロー方式微細形状測定用光ファイバプローブの開発 ―試作および性能評価―2022
- Author(s)
  村上　洋，甲木　昭雄，佐島　隆生，服部　佑美
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-21K03808
[Presentation] ディープラーニングを用いた微細形状測定用光ファイバプローブの自由曲面接触検知手法の開発2021
- Author(s)
  村上洋，甲木昭雄，佐島隆生，内山晃介，佐田雄大
- Organizer
  2021年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-18K03879
[Presentation] 微細形状測定用ファブリ・ペロー干渉計内蔵小径光ファイバスタイラスの開発2021
- Author(s)
  村上洋，甲木昭雄，佐島隆生，内山晃介
- Organizer
  光計測シンポジウム2021
- Data Source
  KAKENHI-PROJECT-21K03808
[Presentation] ファブリ・ペロー方式微細形状測定用光ファイバプローブの試作および性能評価2021
- Author(s)
  服部佑美，村上洋，甲木昭雄，佐島隆生，内山晃介
- Organizer
  2021年度精密工学会中国四国支部・九州支部共催岡山地方講演会
- Data Source
  KAKENHI-PROJECT-21K03808
[Presentation] Improvement of an optical fiber stylus for microstructure and surface roughness measurement2020
- Author(s)
  Uchiyama Kosuke, Hiroshi Murakami, Akio Katsuki, Takao Sajima, Yamamoto Takahiko, Fujiyoshi Kunitaka
- Organizer
  euspen’s 20th International Conference
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03879
[Presentation] 微細形状測定用２段型弾性ヒンジ付きスタイラスの開発2020
- Author(s)
  内山晃介，村上洋，甲木昭雄，佐島隆生，山本隆彦，本田裕、浜野康雄
- Organizer
  2020年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-18K03879
[Presentation] 微細形状測定用光ファイバプローブの自由曲面測定用アルゴリズムの開発2020
- Author(s)
  佐田雄大，村上洋，甲木昭雄，佐島隆生，内山晃介
- Organizer
  2020年度精密工学会精密工学会九州支部学生WEB講演会
- Data Source
  KAKENHI-PROJECT-18K03879
[Presentation] High functionality of an optical fiber stylus for micro metrology2019
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima, Kosuke Ucihyama, Takahiko Yamamoto, Ryosuke Nagata, Kunitaka Fujiyoshi
- Organizer
  Laser Metrology and Machine Performance XIII (Lamdamap2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03879
[Presentation] 極小径光ファイバプローブを用いた微細三次元形状精度測定システムの開発―イオナイザの性能試験―2018
- Author(s)
  横山力也，村上洋，甲木昭雄，佐島隆生，吉田一朗，浜野康雄，本田裕，内山晃介
- Organizer
  2018年度精密工学会精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-18K03879
[Presentation] 測定対象面への付着防止を目的としたスタイラス接触子への帯電防止および撥水コーティングの効果2018
- Author(s)
  内山晃介，村上洋，甲木昭雄，佐島隆生，山本隆彦，永田良介，藤吉国孝
- Organizer
  2018年度精密工学会精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-18K03879
[Presentation] Fabrication of a fiber probe using a CO2 laser for microstructure measurement: High functionality and durability test2018
- Author(s)
  Uchiyama Kosuke, Hiroshi Murakami, Akio Katsuki, Takao Sajima, Yamamoto Takahiko, Nagata Ryosuke, Fujiyoshi Kunitaka
- Organizer
  8th CIRP Conference on High Performance Cutting (HPC 2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03879
[Presentation] Fabrication of Probe Tips for Nanoscale 3D Metrology2017
- Author(s)
  Uchiyama K, Murakami H, Katsuki A, Sajima T, Yamamoto T, Nagata R and Fujiyoshi K
- Organizer
  Proceedings of the 32nd Annual Meeting of the American Society for Precision Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420392
[Presentation] 極小径光ファイバプローブを用いた微細三次元形状精度測定システムの開発2017
- Author(s)
  村上洋，甲木昭雄，佐島隆生，吉田一朗，浜野康雄，本田裕，内山晃介
- Organizer
  光計測シンポジウム２０１７
- Data Source
  KAKENHI-PROJECT-26420392
[Presentation] 極小径光ファイバプローブを用いた微細三次元形状精度測定システムの開発―光学系の改良―2017
- Author(s)
  村上洋，甲木昭雄，佐島隆生，吉田一朗，浜野康雄，本田裕，内山晃介
- Organizer
  2017年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  慶應義塾大学（神奈川県・横浜市）
- Year and Date
  2017-03-17
- Data Source
  KAKENHI-PROJECT-26420392
[Presentation] 微細三次元形状測定用極小径光ファイバプローブの製作2017
- Author(s)
  内山　晃介，村上　洋，甲木昭雄，佐島隆生，山本　隆彦，永田　良介，藤吉　国孝，宮國　健司，青木　響也
- Organizer
  2017年度砥粒加工学会学術講演会
- Data Source
  KAKENHI-PROJECT-26420392
[Presentation] CO2レーザを用いた微細三次元形状測定用極小径光ファイバプローブの製作2016
- Author(s)
  村上洋，甲木昭雄，佐島隆生
- Organizer
  2016年度精密工学会秋季大会学術講演会講演論文集
- Place of Presentation
  茨木大学（茨木県・水戸市）
- Year and Date
  2016-09-07
- Data Source
  KAKENHI-PROJECT-26420392
[Presentation] Development of a System for 3-D Micro Metrology Using an Optical Fiber Probe: Reduction of Surface Force Effect2016
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima, Mitsuyoshi Fukuda
- Organizer
  Proceedings of the European Optical Society Annual Meeting (EOSAM) 2016
- Place of Presentation
  ベルリン（ドイツ）
- Year and Date
  2016-09-28
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420392
[Presentation] FABRICATION OF AN ULTRA-SMALL-DIAMETER OPTICAL FIBER PROBE FOR 3D MICRO METROLOGY2015
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima, Mitsuyoshi Fukuda, Masaki Okada, Megumu Nagaura
- Organizer
  XXI IMEKO World Congress
- Place of Presentation
  Prague, Czech Republic
- Year and Date
  2015-09-02
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420392
[Presentation] Development of a System for 3-D Micro Metrology Using an Ultra-Small-Diameter Optical Fiber Probe2014
- Author(s)
  Hiroshi Murakami, Akio Katsuki, Takao Sajima, Narumi Tokuoh, Mitsuyoshi Fukuda
- Organizer
  29th Annual Meeting of the American Society for Precision Engineering
- Place of Presentation
  The Westin Boston Waterfront
- Year and Date
  2014-11-12
- Data Source
  KAKENHI-PROJECT-26420392
[Presentation] 高速小径主軸 5 自由度運動誤差の簡易同時測定-誤差解析および評価実験-2012
- Author(s)
  村上洋,甲木昭雄,鬼鞍宏猷,佐島隆生,近藤英二
- Organizer
  2011 年度精密工学会秋季大会学術講演会講演論文集
- Place of Presentation
  金沢大学
- Year and Date
  2012-09-20
- Data Source
  KAKENHI-PROJECT-22760100
[Presentation] Simple and Simultaneous Measurement of Five-Degrees-of-Freedom Error Motions for a Micro High-Speed Spindle2012
- Author(s)
  Hiroshi MURAKAMI
- Organizer
  Proceedings of the 12th euspen International Conference, Vol.2
- Place of Presentation
  Stockholm, Sweden
- Data Source
  KAKENHI-PROJECT-22760100
[Presentation] Simple and Simultaneous Measurement of Five-Degrees-of-Freedom Error Motions for a Micro High-Speed Spindle2012
- Author(s)
  Hiroshi MURAKAMI, Akio KATSUKI, Takao SAJIMA, Noriya NAKAYAMA
- Organizer
  Proceedings of the 12th euspen International Conference
- Place of Presentation
  Sweden
- Data Source
  KAKENHI-PROJECT-22760100
[Presentation] Development of an Optical Measurement System for Five-Degrees-of-Freedom Error Motions of a Micro High-Speed Spindle2011
- Author(s)
  Hiroshi MURAKAMI, Akio KATSUKI, Hiromichi ONIKURA, Takao SAJIMA
- Organizer
  Proceedings of the ASPE Annual Meeting
- Place of Presentation
  Denver Marriott City Center Hotel, U.S.A.
- Year and Date
  2011-11-15
- Data Source
  KAKENHI-PROJECT-22760100
[Presentation] Development of an Optical Measurement System for Five-Degrees-of-Freedom Error Motions of a Micro High-Speed Spindle2011
- Author(s)
  Hiroshi MURAKAMI, Akio KATSUKI, Hiromichi ONIKURA, Takao SAJIMA
- Organizer
  Proceedings of the 26th Annual Meeting of the American Society for Precision Engineering
- Place of Presentation
  United States of America
- Data Source
  KAKENHI-PROJECT-22760100
[Presentation] Measurement of Five-Degrees-of-Freedom Error Motions for a Micro High-Speed Spindle Using an Optical Technique2011
- Author(s)
  Hiroshi MURAKAMI
- Organizer
  Proceedings of SPIE, Vol.8082
- Place of Presentation
  International Congress Centre Munich, Germany
- Year and Date
  2011-05-23
- Data Source
  KAKENHI-PROJECT-22760100
[Presentation] 高速小径主軸5自由度運動誤差の簡易同時計測-誤差解析および評価実験-2011
- Author(s)
  村上洋、甲木昭雄、鬼鞍宏猷、佐島隆生、中山義野
- Organizer
  2011年度精密工学会秋季大会学術講演会
- Place of Presentation
  金沢大学
- Year and Date
  2011-09-22
- Data Source
  KAKENHI-PROJECT-22760100
[Presentation] Optical Measurement of Five-Degree-of-Freedom Error Motions for a Micro High-Speed Spindle2010
- Author(s)
  Hiroshi MURAKAMI,Norio KAWAGOISHI, Eiji KONDO, Akira KODAMA
- Organizer
  Proceedings of the 4th CIRP International Conference on High Performance Cutting
- Place of Presentation
  JAPAN
- Data Source
  KAKENHI-PROJECT-22760100
[Presentation] Optical Measurement of Five-Degree-of-Freedom Error Motions for a Micro High-Speed Spindle2010
- Author(s)
  Hiroshi MURAKAMI, Norio KAWAGOISHI, Eiji KONDO, Akira KODAMA
- Organizer
  Proceedings of the 4th CIRP International Conference on High Performance Cutting
- Place of Presentation
  長良川国際会議場(岐阜県)
- Year and Date
  2010-10-26
- Data Source
  KAKENHI-PROJECT-22760100
[Presentation] 光ファイバプローブを用いた微小径穴形状精度測定システムの開発-測定の繰り返し性評価-2009
- Author(s)
  村上洋, 甲木昭雄, 鬼鞍宏猷, 佐島隆生, 近藤英二
- Organizer
  2009年度精密工学会秋季大会学術講演会
- Place of Presentation
  神戸大学
- Year and Date
  2009-09-11
- Data Source
  KAKENHI-PROJECT-19760096
[Presentation] Development of a Measuring System for Micro Hole Accuracy Using an Optical Fiber Probe -Evaluation of Measurement Repeatability-2009
- Author(s)
  Hiroshi MURAKAMI, Akio KATSUKI, Hiromichi ONIKURA, Takao SAJIMA, Norio KAWAGOISHI, Eiji KONDO, Tomohiro HONDA
- Organizer
  5th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)
- Place of Presentation
  大阪大学
- Year and Date
  2009-12-03
- Data Source
  KAKENHI-PROJECT-19760096
[Presentation] Development of a Measuring System for Micro Hole Accuracy Using an Optical Fiber Probe-Evaluation of Measurement Repeatability-2009
- Author(s)
  Hiroshi MURAKAMI
- Organizer
  5th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  大阪大学
- Year and Date
  2009-12-03
- Data Source
  KAKENHI-PROJECT-19760096
[Presentation] Development of a Measuring System for Micro Hole Accuracy Using an optical fiber probe : Accuracy evaluation2009
- Author(s)
  Hiroshi MURAKAMI
- Organizer
  euspen 9th International Conference & 11 Annual General Meeting
- Place of Presentation
  Kursaal, San Sebastian, Spain
- Year and Date
  2009-06-05
- Data Source
  KAKENHI-PROJECT-19760096
[Presentation] 光ファイバプローブを用いた微小径穴形状精度測定システムの開発-精度評価-2009
- Author(s)
  村上洋, 甲木昭雄, 鬼鞍宏猷, 佐島隆生, 近藤英二
- Organizer
  2009年度精密工学会春季大会学術講演会
- Place of Presentation
  東京(中央大学)
- Year and Date
  2009-03-12
- Data Source
  KAKENHI-PROJECT-19760096
[Presentation] 光ファイバプローブを用いた微小径穴形状精度測定システムの開発-光学的解析-2008
- Author(s)
  村上洋
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  明治大学
- Year and Date
  2008-03-18
- Data Source
  KAKENHI-PROJECT-19760096
[Presentation] 光ファイバプローブを用いた微小径穴形状精度測定システムの開発-表面間力の解析-2008
- Author(s)
  村上洋, 甲木昭雄, 鬼鞍宏猷, 佐島隆生, 近藤英二
- Organizer
  2008年度精密工学会九州支部福岡地方講演会
- Place of Presentation
  福岡(九州大学)
- Year and Date
  2008-12-06
- Data Source
  KAKENHI-PROJECT-19760096
[Presentation] 光ファイバプローブを用いた微小径穴形状精度測定システムの開発-装置の試作および評価実験-2008
- Author(s)
  村上洋, 甲木昭雄, 鬼鞍宏猷, 佐島隆生
- Organizer
  2008年度精密工学会秋季大会学術講演会
- Place of Presentation
  宮城(東北大学)
- Year and Date
  2008-09-18
- Data Source
  KAKENHI-PROJECT-19760096
[Presentation] Development of a Measuring System for a Micro Hole : Using an 0 ptical Fiber Probe2008
- Author(s)
  Hiroshi MURAKAMI, Akio KATSU KI, Hiromichi ONIKURA, Takao SATTMA
- Organizer
  Twenty-third Annual ASPE Meeting & 12^<th> ICPE
- Place of Presentation
  Portland, Oregon, USA
- Year and Date
  2008-10-21
- Data Source
  KAKENHI-PROJECT-19760096

Murakami Hiroshi 村上 洋

MURAKAMI Hiroshi 村上 洋

Research Projects

Research Products

微細形状測定用ファブリ・ペロー方式光ファイバプローブの小径化および高分解能化Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of a stylus with a Fabry-Perot interferometer built into an optical fiber tip for microstructure measurementPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Fabrication method of an L-shaped stylus with a sharp tip and a standard type stylus for measuring micro hole and wall roughnessPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of a System for 3-D Micro Metrology Using a Nano Order Diameter Optical Fiber ProbePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Simple and simultaneous measurement of five-degrees-of-freedom error motions of high-speed microspindlePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of a Micro Hole Measuring System Using an Optical Fiber ProbePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Resolution enhancement of Fabry-Perot optical fiber probe for microstructure measurement2024

Author(s)

Journal Title

Data Source

[Journal Article] Development of a two-step stylus with elastic hinge for microstructure measurement to improve sensitivity and vibration characteristics2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Development of a High-Function Fiber Stylus for Microstructure Measurement with Water-Repellent and Antistatic Coatings2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Development of a Sharp-Tipped L-Shaped Stylus for Measurement of Nanoscale Sidewall Features2022

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] 微細形状測定機用マイクロファイバスタイラスの製作技術2022

Author(s)

Journal Title

Data Source

[Journal Article] Investigation of Factors Affecting Sensitivity Enhancement of an Optical Fiber Probe for Microstructure Measurement Using Oblique Incident Light2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Development of measurement system for microstructures using an optical fiber probe: improvement of measurable region and depth2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Fabrication of an ultra-small-diameter optical fiber probe using an acid-etch technique and a CO2 laser for 3D micro metrology2017

Author(s)

Journal Title

NAID

Murakami Hiroshi 村上洋

MURAKAMI Hiroshi 村上洋