FURUKI Tatsuya 古木辰也

… Alternative Names

Furuki Tatsuya 古木辰也

Less

Researcher Number	00783482
Other IDs
Affiliation (Current)	2026: 中部大学, 工学部, 准教授
Affiliation (based on the past Project Information) *help	2026: 中部大学, 工学部, 准教授 2024: 中部大学, 工学部, 准教授 2022 – 2023: 中部大学, 工学部, 講師 2017 – 2021: 岐阜大学, 工学部, 助教
Review Section/Research Field	Principal Investigator Basic Section 18020:Manufacturing and production engineering-related / Production engineering/Processing studies
Keywords	Principal Investigator 画像解析 / 機械学習 / 表面粗さ / 硬脆材料 / 寿命予測 / 工具摩耗 / ドリル加工 / ベイジアンネットワーク / 折損予測 / セラミックス … More / マイクロドリル / ドリル折損 / 目詰まり / ダイヤモンドコーティングドリル / 研磨ロボット / 金属積層造形材料 / 金型 / 自動判定 / 磁気研磨加工 / 多関節ロボット / サポートベクターマシン / 表面粗さ推定 / ロボット研磨 / 金属積層造形 / 磁気研磨 / 加工モニタリング / 切削加工 / 温度測定 / 難削材料 / モニタリング / エンドミル加工 / バリ / オシレーション / トリミング / エンドミル / オシレーション研削 / cBN工具 / 加工条件設計 / 研削温度 / 電着エンドミル / 研削加工 / CFRP Less

Research Projects
(4 results)
Research Products
(15 results)

高周波弾性波を用いた加工モード予測によるCVD-SiCの高能率クラックレス切削Principal Investigator
- Principal Investigator
  
  古木辰也
- Project Period (FY)
  2026 – 2028
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Chubu University
統計的因果推論に基づくマイクロドリルの突発的折損予測法の開発Principal Investigator
- Principal Investigator
  
  古木辰也
- Project Period (FY)
  2023 – 2025
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Chubu University
Intelligent polishing technology by using low rigidity robot and magnetism for metal additive manufactured moldPrincipal Investigator
- Principal Investigator
  
  Furuki Tatsuya
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Chubu University
  Gifu University
Development of high precision machining method for CFRP with hybrid electroplated end-millPrincipal Investigator
- Principal Investigator
  
  Furuki Tatsuya
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Gifu University

All 2024 2023 2021 2019 2018 2017

All Journal Article Presentation

[Journal Article] In Situ Evaluation of Drill Wear Using Tool Image Captured on Machining Center2024
- Author(s)
  Furuki Tatsuya、Nagai Tomoki、Nishigaki Koichi、Suda Takashi、Kousaka Hiroyuki
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 18 Issue: 2 Pages: 181-188
- DOI
  10.20965/ijat.2024.p0181
- ISSN
  1881-7629, 1883-8022
- Year and Date
  2024-03-05
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23K03611
[Journal Article] 教師あり学習を用いた研磨加工面画像に基づく表面粗さ推定法の開発2023
- Author(s)
  古木辰也,入口大輝,上坂裕之
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 67 Pages: 30-35
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K14624
[Journal Article] Development of cBN electroplated end-mill combined cutting and grinding for precision machining of CFRP2018
- Author(s)
  Tatsuya Furuki, Yugo Kabaya, Toshiki Hirogaki, Eiichi Aoyama, Kiyofumi Inaba and Kazuna Fujiwara
- Journal Title
  
  International Journal of Abrasive Technology
  
  Volume: 印刷中
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14570
[Presentation] Research on breakage prevention of small diamond coated drill using drill image and machine learning2024
- Author(s)
  Tatsuya Furuki, Yoshimi Takeuchi, Hirofumi Suzuki, Koichi Nishigaki, Takashi Suda
- Organizer
  73rd CIRP General Assembly (PartⅡ STC C)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K03611
[Presentation] ダイヤモンドコートドリル表面上切りくず汚染の画像によるオンマシン検出2024
- Author(s)
  加藤宏亮、古木辰也、西垣功一、須田貴志
- Organizer
  砥粒加工学会　先進テクノフェア(ATF2024)
- Data Source
  KAKENHI-PROJECT-23K03611
[Presentation] Detection of Chips Loading on Diamond Coated Drill with On-machine Captured Drill Image2024
- Author(s)
  Kousuke Kato, Tatsuya Furuki, Koichi Nishigaki, Takashi Suda
- Organizer
  The 26th International Symposium on Advances in Abrasive Technology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K03611
[Presentation] Development of on-machine drill wear measuring instrument using image analysis method2023
- Author(s)
  Tomoki Nagai、Tatsuya Furuki、Koichi Nishigaki、Tamashi Suda、Hiroyuki Kousaka
- Organizer
  The 25th International Symposium on Advances in Abrasive Technology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K03611
[Presentation] 多関節ロボットアームを用いた金属AM製金型の磁気研磨法の開発2021
- Author(s)
  入口大輝，古木辰也，上坂裕之
- Organizer
  2021年度砥粒加工学会学術講演会
- Data Source
  KAKENHI-PROJECT-20K14624
[Presentation] CFRP加工用cBN電着エンドミルの加工条件の最適化2019
- Author(s)
  山下真之介，古木辰也，上坂裕之，稲葉清文，藤原和納
- Organizer
  2019年度砥粒加工学会先進テクノフェア
- Data Source
  KAKENHI-PROJECT-17K14570
[Presentation] CFRPの高精密加工を実現するcBN電着エンドミルの開発と最適加工条件の導出2019
- Author(s)
  山下真之介，古木辰也，上坂裕之，稲葉清文，藤原和納
- Organizer
  日本機械学会2019年度年次大会
- Data Source
  KAKENHI-PROJECT-17K14570
[Presentation] CFRP加工用cBN電着エンドミルの加工条件の最適化2019
- Author(s)
  山下真之介，古木辰也，上坂裕之，稲葉清文，藤原和納
- Organizer
  砥粒加工学会先進テクノフェア
- Data Source
  KAKENHI-PROJECT-17K14570
[Presentation] Investigation on optimum abrasive size of cBN electroplated end-mill for CFRP machining2019
- Author(s)
  Tatsuya Furuki, Shinnosuke Yamashita, Toshiki Hirogaki, Eiichi Aoyama, Ruriko Kometani, Kiyofumi Inaba and Kazuna Fujiwara
- Organizer
  euspen 19th International Conference and Exhibition
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14570
[Presentation] Investigation of Optimum Grinding condition using cBN Electroplated End-mill for CFRP Machining2019
- Author(s)
  Shinnosuke Yamashita, Tatsuya Furuki, Hiroyuki Kousaka, Kiyofumi Inaba and Kazuna Fujiwara
- Organizer
  The 22th International Symposium On Advances in Abrasive Technology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14570
[Presentation] CBN電着エンドミル工具を用いたCFRP側面切削時の現象の考察2017
- Author(s)
  米谷瑠里子，廣垣俊樹，青山栄一，古木辰也，稲葉清文，藤原和納
- Organizer
  2017年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-17K14570
[Presentation] Development of cBN electroplated end-mill combined cutting and grinding for precision machining of CFRP2017
- Author(s)
  Tatsuya Furuki, Yugo Kabaya, Toshiki Hirogaki, Eiichi Aoyama, Kiyofumi Inaba and Kazuna Fujiwara
- Organizer
  The 20th International Symposium on Advances in Abrasive Technology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14570

FURUKI Tatsuya 古木 辰也

Furuki Tatsuya 古木 辰也

Research Projects

Research Products

高周波弾性波を用いた加工モード予測によるCVD-SiCの高能率クラックレス切削Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

統計的因果推論に基づくマイクロドリルの突発的折損予測法の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Intelligent polishing technology by using low rigidity robot and magnetism for metal additive manufactured moldPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of high precision machining method for CFRP with hybrid electroplated end-millPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] In Situ Evaluation of Drill Wear Using Tool Image Captured on Machining Center2024

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] 教師あり学習を用いた研磨加工面画像に基づく表面粗さ推定法の開発2023

Author(s)

Journal Title

Data Source

[Journal Article] Development of cBN electroplated end-mill combined cutting and grinding for precision machining of CFRP2018

Author(s)

Journal Title

Data Source

[Presentation] Research on breakage prevention of small diamond coated drill using drill image and machine learning2024

Author(s)

Organizer

Data Source

[Presentation] ダイヤモンドコートドリル表面上切りくず汚染の画像によるオンマシン検出2024

Author(s)

Organizer

Data Source

[Presentation] Detection of Chips Loading on Diamond Coated Drill with On-machine Captured Drill Image2024

Author(s)

Organizer

Data Source

[Presentation] Development of on-machine drill wear measuring instrument using image analysis method2023

Author(s)

Organizer

Data Source

[Presentation] 多関節ロボットアームを用いた金属AM製金型の磁気研磨法の開発2021

Author(s)

Organizer

Data Source

[Presentation] CFRP加工用cBN電着エンドミルの加工条件の最適化2019

Author(s)

Organizer

Data Source

[Presentation] CFRPの高精密加工を実現するcBN電着エンドミルの開発と最適加工条件の導出2019

Author(s)

Organizer

Data Source

[Presentation] CFRP加工用cBN電着エンドミルの加工条件の最適化2019

Author(s)

Organizer

Data Source

[Presentation] Investigation on optimum abrasive size of cBN electroplated end-mill for CFRP machining2019

Author(s)

Organizer

Data Source

FURUKI Tatsuya 古木辰也

Furuki Tatsuya 古木辰也