MATSUKI Kenji 松木賢司

Researcher Number	10019193
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2007: 富山大学, 大学院・理工学研究部, 教授 2006: 富山大学, 理工学研究部(工学), 教授 2005: University of Toyama, Graduate School of Science and Engineering, Professor, 大学院理工学研究部工学, 教授 2004 – 2005: 富山大学, 工学部, 教授 1996 – 1998: TOYAMA University, Faculty of Engineering, PROFESSOR, 工学部, 教授 1995 – 1996: 富山大学, 工学部, 助教授 1992 – 1993: 富山大学, 工学部, 助教授
Review Section/Research Field	Principal Investigator Structural/Functional materials / Structural/Functional materials / 金属材料(含表面処理・腐食防食) Except Principal Investigator Production engineering/Processing studies
Keywords	Principal Investigator 高速超塑性 / アルミニウム合金 / しきい応力 / m値 / メカニカルアロイング / ECAP / Mechanical Alloying / SiC粒子 / 複合材料 / 粒界すべり … More / 伸び / ナノ結晶粒 / アルミニウム合金粉末 / fine grained structure / superplasticity / wear resistance / mechanical properties / extrusion of cutting chips / SiC particle reinforced composite / magnesium alloy / 形材表面性状 / 繰り返し押出し / リサイクル / 熱間押出し / 複合材 / 微細結晶粒組織 / 超塑性 / 耐摩耗性 / 室温機械的性質 / 切削チップ押出し / SiC粒子強化複合材 / マグネシウム合金 / fine sub-structure / fine intermetallic particles / Precipitation / High Temperature Strength / Atomized aluminum powder / 加工熱処理 / 微細析出粒子 / 急冷凝固粉末 / 金属間化合物 / 耐熱強度 / ミクロ組織微細化 / 微細下部組織 / 微細化合物粒子 / 析出 / 高温強度 / アトマイズアルミ粉末 / Threshold stress / m value / Fine Grain Size / SiC Particurate / Aluminium Alloy / High Strain Rate Superplasticity / Composit / 変形応力 / 動的再結晶 / 微細結晶料 / 破断伸び / 炭火珪素粒子 / アルミニウム基複合材料 / 微細結晶粒 / 液相 / 微細結晶粒径 / 低温度化 / 粉末アルミニウム合金 / アトマイズ粉末 … More Except Principal Investigator FEMシミュレーション / アルミニウム合金 / スパイラル押出し / 螺旋溝成形 / ポートホールダイス / 熱間押出し / 塑性加工 Less

Forming for inside spiral multi-grooved tube by hot extrusion
- Principal Investigator
  
  TAKATSUJI Norio
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  University of Toyama
Development of advanced Mg-SiC particulate composite by mixing extrusion processPrincipal Investigator
- Principal Investigator
  
  MATSUKI Kenji
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  University of Toyama
粉末アルミニウム合金のナノ結晶化と高速超塑性の低温度化Principal Investigator
- Principal Investigator
  
  松木賢司
- Project Period (FY)
  1998
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas (A)
- Research Institution
  University of Toyama
ナノ結晶化アルミニウム粉末合金の高速超塑性特性とその粒径依存性に関する研究Principal Investigator
- Principal Investigator
  
  松木賢司
- Project Period (FY)
  1997
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  University of Toyama
ナノ結晶化アルミニウム合金の低温・高速超塑性特性とその粒径依存性に関する研究Principal Investigator
- Principal Investigator
  
  松木賢司
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  University of Toyama
Development of High Temperature Aluminum Alloy by Optimum Control in Mechanical Solution Treatment-Nano Phase precipitation ProcessPrincipal Investigator
- Principal Investigator
  
  MATSUKI Kenji
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  TOYAMA UNIVERSITY
Development of High Strain Rate Superplastic Aluminum-SiC Particulate CompositsPrincipal Investigator
- Principal Investigator
  
  MATSUKI Kenji
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  金属材料(含表面処理・腐食防食)
- Research Institution
  TOYAMA UNIVERSITY

All 2008 2006 2005

All Journal Article

[Journal Article] 内面螺旋溝付き押出し管の成形2008
- Author(s)
  高辻則夫, 村上哲, 長谷川豊, 松木賢司, 會田哲夫, 室谷和雄
- Journal Title
  
  塑性と加工 49
  
  Pages: 1086-1090
- NAID
  10022079773
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560099
[Journal Article] 内面螺旋溝付き押出し管の成形2008
- Author(s)
  高辻則夫, 村上哲, 長谷川豊, 松木賢司, 會田哲夫, 室谷和雄
- Journal Title
  
  塑性と加工第49巻第574号
  
  Pages: 1086-1090
- NAID
  10022079773
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560099
[Journal Article] AZ31Bマグネシウム合金切削チップ押出し材の特性に及ぼす押出速度の影響2006
- Author(s)
  會田哲夫, 高辻則夫, 松木賢司, 小原卓, 鎌土重晴
- Journal Title
  
  軽金属 56巻・3号
  
  Pages: 166-171
- Data Source
  KAKENHI-PROJECT-16560610
[Journal Article] Mg-Al-Zn系合金切削チップ熱間押出材の表面性状の改善2005
- Author(s)
  會田哲夫, 高辻則夫, 松木賢司, 小原卓, 鎌土重晴
- Journal Title
  
  軽金属 55巻・9号
  
  Pages: 400-404
- NAID
  40006973117
- Data Source
  KAKENHI-PROJECT-16560610

1. TAKATSUJI Norio (20143844)

# of Collaborated Projects: 5 results

# of Collaborated Products: 4 results
2. TOKIZAWA Mitsugu (50019171)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
3. AIDA Tetsuo (20283062)

# of Collaborated Projects: 3 results

# of Collaborated Products: 2 results

MATSUKI Kenji 松木 賢司

Research Projects

Research Products

Co-Researchers

Forming for inside spiral multi-grooved tube by hot extrusion

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of advanced Mg-SiC particulate composite by mixing extrusion processPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

粉末アルミニウム合金のナノ結晶化と高速超塑性の低温度化Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Institution

ナノ結晶化アルミニウム粉末合金の高速超塑性特性とその粒径依存性に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Institution

ナノ結晶化アルミニウム合金の低温・高速超塑性特性とその粒径依存性に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Institution

Development of High Temperature Aluminum Alloy by Optimum Control in Mechanical Solution Treatment-Nano Phase precipitation ProcessPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of High Strain Rate Superplastic Aluminum-SiC Particulate CompositsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 内面螺旋溝付き押出し管の成形2008

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 内面螺旋溝付き押出し管の成形2008

Author(s)

Journal Title

NAID

Data Source

[Journal Article] AZ31Bマグネシウム合金切削チップ押出し材の特性に及ぼす押出速度の影響2006

Author(s)

Journal Title

Data Source

[Journal Article] Mg-Al-Zn系合金切削チップ熱間押出材の表面性状の改善2005

Author(s)

Journal Title

NAID

Data Source

MATSUKI Kenji 松木賢司