• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

INOUE Tatsuo  井上 達雄

ORCIDConnect your ORCID iD *help
… Alternative Names

井上 達雄  イノウエ タツオ

Less
Researcher Number 10025950
Other IDs
External Links
Affiliation (Current) 2025: 京都大学, エネルギー科学研究科, 名誉教授
Affiliation (based on the past Project Information) *help 2013 – 2014: 埼玉工業大学, 付置研究所, 教授
2012: 福山大学, 公私立大学の部局等, その他
2012: 福山大学, 構造・材料開発研究センター, 客員研究員
2010 – 2011: 福山大学, 構造・材料開発研究センター, 客員教授
2009: Fukuyama University, 工学部, 教授 … More
2005 – 2007: 福山大学, 工学部, 教授
1996 – 2000: KYOTO UNIVERSITY,DEPARTMENT OF ENERGY CONVERSION SCIENCE,PROFESSOR, エネルギー科学研究科, 教授
1999: 京都大学, 大学院・エネルギー科学研究科, 教授
1995: Kyoto Univ., Graduate School, Prof., 工学研究科, 教授
1994: 京都大学, 工学部, 教授
1987 – 1992: Faculty of Engineering, Kyoto University, Professor, 工学部, 教授
1986: Faculty of Engineering, Kyoto University, Professor, 工学部, 教授 Less
Review Section/Research Field
Principal Investigator
Materials/Mechanics of materials / 材料力学 / 機械材料工学 / Materials/Mechanics of materials
Except Principal Investigator
Materials/Mechanics of materials / Building structures/materials / 材料力学 / Materials/Mechanics of materials
Keywords
Principal Investigator
有限要素法 / 相変態 / Molecular dynamics / 分子動力学法 / 多軸応力 / 残留応力 / フェーズフィールド法 / 金属基複合材料 / Finite element method / 寿命評価 … More / 非弾性構成式 / 変態・熱・力学 / 損傷力学 / 塑性疲労 / 非弾性 / シミュレーション / 構成式 / 材料設計 / Database / Phase Transformation / 溶融・凝固 / 溶接 / 焼入れ / データベース / Ultra-micro-hardness / 超微小硬度 / 内部応力 / Finite Element Analysis / 高温非弾性変形 / 温度依存性 / 浸炭 / Simulation of solidification / Thin-slab caontinuous castin / 双ロール型薄板連続鋳造装置 / 凝固シミュレーション / 薄板連続鋳造 / Crack Initiation / Fracture Mechanics / Damage Mechanics / Multiaxial Stress / Low Cycle Fatigue / Notched Component / き裂伝ぱ / き裂発生 / 破壊力学 / 切欠き材 / Plasticity-creep interaction / Inelastic meterial behaviour / Constitutive equations / 塑性ークリープ相互作用 / 塑性-クリープ相互作用 / 非弾性挙動 / Multiaxial stresses / Low cycle fatigue / Life estimation / Fire resistant steel / Temperature and load variation / Transformation plastic coefficient / Unified plasticity theory / Metallo-Thermo-mechanics / Transformation plasticity / 統合型熱塑性構成式 / 変態塑性 / Temperature dependence / Mechanical Property / Thermophysical Property / Stress-strain curve / Steel / Heat Treatment / 解析 / 高温 / 金属材料 / 力学的性質 / 熱物性定数 / 応力-ひずみ関係 / 鉄鋼材料 / 熱処理 / Phase-field method / Crystal plasticity / Heat affected zone / Metallo-thermo-mechanics / Phase transformation / 接合 / 微視的・巨視的力学 / 境界・界面移動 / 結晶塑性 / 熱影響部 / 分子動力学 / Residual stress / Finite elemnet method / Surface-modified MMC / Particle-dispersed MMC / Fiber-reinforced MMC / Debonding on interface / Metal matrix composite / SiCウィスカ / アルミニウム合金 / ユニットセルモデル / 連続体損傷力学 / クリープ / 表面改質型MMC / 粒子分散強化型MMC / 繊維強化型MMC / 界面剥離 / RESIDUAL STRESS / REINFORCEMENT / METALLO-THERMO-MECHANICS / MATERIAL DESIGN / METAL MATRIX COMPOSITE / CENTRIFUGAL CASTING METHOD / 界面強度 / 遠心鋳造法 / 傾斜機能材料 / 変態-執-力学 / 金属複合材料 / 強化材 / 変態-熱-力学 / 遠心鋳造 / Bending strength / Intrinsic Stress / Materials design / Coated materials / Metal Matrix composites / 曲げ強度 / セラミックス被覆材 / casting / Welding / Tempering / Quenching / Program / Thermo-mechanics / 連続鋳造 / 熱・力学解析 / ソフトウエア / 鋳造 / 焼もどし / プログラム / 熱・力学 / Spatter coating / Detonation coating / Internal stress / Ceramic thin film / Ceramic coating / 非定常温度場 / スパッタ溶射 / 爆発溶射 / セラミック薄膜 / セラミック被覆 / Unified Constitutive Relation / Life Prediction / Inelastic Constitutive Relation / Fatigue-creep Interaction / Plasticity-creep Interaction / 塑性-クリ-プ相互作用 / 統一型構成式 / 有限要素解析 / 疲労ークリ-プ相互作用 / 塑性ークリ-プ相互作用 / 統一型非弾性構成式 / 核融合炉第一壁 / PCA材 / 繰返し変形 / オーステナイト系ステンレス鋼 / 第一候補材 / 高温強度 / 簡便法 / 化合物 / 弾塑性解析 / 化学量論 / 応力解析 / 初期ひずみ / 体積変化 / 拡散 / 窒素分布 / 固有ひずみ / 体積膨張 / 窒化物 / 窒化 / フェズフィールド法 / フェーズフィールド / 材料パラメーター / 統合型変態・熱塑性構成式 / 材料力学 … More
Except Principal Investigator
Finite Element Method / 有限要素法 / 微視組織 / 数値解析 / High Ductility / Low Yield / Seismic Retrofit / Energy Absorption Capacity / Steel Structure / Reinforced Concrete Structure / Seismic Structure / Earthquake Resistant Steel / 抵降伏 / 鉄筋コンクリート造 / 高延性 / 低降伏 / 耐震補強 / エネルギー吸収 / 鋼構造 / 鉄筋コンクリート構造 / 耐震構造 / 耐震性新鋼材 / Material Anisotropy / Microscopic Deformation / Crystal Plasticity / Heat Affected Zone / Inhomogeneity / 成形限界 / 有限変形理論 / 材料異方性 / 微視変形 / 結晶塑性学 / 熱影響部 / 不均質性 / Stefan Problem / Integral Penalty Method / Numerical Analysis / Solidification / Welding / ステファン問題 / 積分ペナルティ法 / 凝固 / 溶接 / Random system / Grain fracture model / Fracture mechanics / Frature toughness / Microstruture / Bending strength / Inherent flaw / Engineering ceramics / 数値シミュレ-ション / ランダム系 / 結晶破壊モデル / 破壊力学 / 破壊じん性 / 曲げ強度 / 潜在欠陥 / 構造用セラミックス / 地域福祉 / 個別生産 / 室内環境 / 成形合板技術 / 木材 / 姿勢保持 / 高齢者 / 車いす / 計算機シミュレーション / マルチスケール解析 / 力学特性 / 分子動力学 / 相変態 / フェーズフィールドモデル / 固体力学 / 計算力学 Less
  • Research Projects

    (22 results)
  • Research Products

    (78 results)
  • Co-Researchers

    (32 People)
  •  Analysis of chemical compoung and maechanical field during nitridingPrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      2012 – 2014
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Saitama Institute of Technology
      Fukuyama University
  •  Development of coupling scheme for micro- and macroscopic mechanics using phase field model

    • Principal Investigator
      UEHARA Takuya
    • Project Period (FY)
      2011 – 2013
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Yamagata University
  •  Generalization of unified transformation-plasticity constitutive equation with identified material parameters and the application to metallo-thermo-mechanical simulation.Principal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      2009 – 2011
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Fukuyama University
  •  DEVELOPMENT OF SEISMIC PERFORMANCE FOR REINFORCED CONCRETE MEMBERS WITH EARTHQUAKE-RESISTANT STEEL BAR

    • Principal Investigator
      MINAMI Koichi
    • Project Period (FY)
      2005 – 2007
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Building structures/materials
    • Research Institution
      Fukuyama University
  •  Unified Plasticity Theory of Transformation plastic Behavior and the Microscopic InvestigationPrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Fukuyama University
  •  Construction of Materials Database on High Temperature Inelastic Behavior of Metallic Materials and the Application to Numerical AnalysesPrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      1999 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (B).
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      KYOTO UNIVERSITY
  •  MECHANICAL MODELING OF INHOMOGENEOUS MEDIA AND APPLICATION TO EVALUATION OF HEAT AFFECTED ZONE IN WELD JOINT STRUCTURE

    • Principal Investigator
      IMATANI Shoji
    • Project Period (FY)
      1999 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      KYOTO UNIVERSITY
  •  A Research on Microscopic and Macroscopic Mechanics in Melting/Solidification Processes Incorporating Moving Boundary/Interface, and Its Application to Welding and BondingPrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      1998 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (A).
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      KYOTO UNIVERSITY
  •  PPREDICTION OF FREE BOUNDARY IN SOLIDIFICATION ANALYSIS BASED ON INTEGRAL PENALTY METHOD AND ALE CONTROL

    • Principal Investigator
      IMATANI Shoji
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      KYOTO UNIVERSITY
  •  Sesearch on the mechanism of debonding process on the matrix-reinforcement interface of metai-matrix composites and the development of the method of analysisPrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      1996 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      KYOTO UNIVERSITY
  •  DESIGN,PROCESSING AND EVALUATION OF FUNCTIONALLY GRADIENT MATERIALS BY MEANS OF CENTRIFUGAL CASTING METHODPrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      KYOTO UNIVERSITY
  •  Formation of Metal-and Ceramic-Matrix Composites and Its Computer-Aided Materials Design Based on Interface PropertiesPrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      1994 – 1995
    • Research Category
      Grant-in-Aid for General Scientific Research (A)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      KYOTO UNIVERSITY
  •  Thermo-Mechanical Analysis on Formation and Strength of Coated Ceramic FilmPrincipal Investigator

    • Principal Investigator
      INOUE Tatuo
    • Project Period (FY)
      1991 – 1992
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械材料工学
    • Research Institution
      KYOTO UNIVERSITY
  •  Development of Generalized Computer Program for Thermo-mechanical Simulation incorporating Phase Transformation and Establishment of DatabasePrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      1991 – 1992
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B)
    • Research Field
      材料力学
    • Research Institution
      KYOTO UNIVERSITY
  •  Fracture Mechanics Approach for Random Systems and Its Application to Analysis of Strength Depending on Inherent Flaw in Ceramics

    • Principal Investigator
      梨原 宏, HOSHIDE Toshihiko
    • Project Period (FY)
      1990 – 1992
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      材料力学
    • Research Institution
      Tohoku Institute of Technology
      Kyoto University
  •  A Study on the Application of Inelastic Constitutive Relations under Plasticity-Creep Interaction and the Evaluation of Life Prediction MethodsPrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      1989 – 1990
    • Research Category
      Grant-in-Aid for Co-operative Research (A)
    • Research Field
      材料力学
    • Research Institution
      Kyoto University
  •  第一壁構造用材料の高温多軸応力下における非弾性構成関係の構築Principal Investigator

    • Principal Investigator
      井上 達雄
    • Project Period (FY)
      1988
    • Research Category
      Grant-in-Aid for Fusion Research
    • Research Institution
      Kyoto University
  •  プラズマディスラプション時における第一壁構造用材料の非弾性挙動に関する研究ーとくに非弾性構成式の構築と多軸応力下における検証ーPrincipal Investigator

    • Principal Investigator
      井上 達雄
    • Project Period (FY)
      1987
    • Research Category
      Grant-in-Aid for Fusion Research
    • Research Institution
      Kyoto University
  •  Analyses on Damage and Deformation in Notched Component under Multiaxial Low Cycle FatiguePrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      1987 – 1988
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械材料工学
    • Research Institution
      Kyoto University
  •  Thermo-mechanical Simulation of Solidification Process of Molton Steel for the Development of Thin-strip-casting Method and Its Verification.Principal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      1987 – 1988
    • Research Category
      Grant-in-Aid for Developmental Scientific Research
    • Research Field
      材料力学
    • Research Institution
      Kyoto University
  •  Evaluation of Inelastic Constitutive Equations under Plasticity-creep Interaction Condition subjected to Multiaxial StressesPrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      1986 – 1987
    • Research Category
      Grant-in-Aid for Co-operative Research (A)
    • Research Field
      材料力学
    • Research Institution
      Kyoto University
  •  Estimation of Low Cycle FAtigue Life under Multiaxial Stresses based on the Analysis of Nucleation and Propagation of CracksPrincipal Investigator

    • Principal Investigator
      INOUE Tatsuo
    • Project Period (FY)
      1985 – 1986
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械材料工学
    • Research Institution
      Kyoto University

All 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Other

All Journal Article Presentation Book

  • [Book] 技術の文化史22015

    • Author(s)
      井上達雄
    • Total Pages
      276
    • Publisher
      関西大学出版部
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Book] Comprehensive Material Processing2013

    • Author(s)
      Tatsuo Inoue
    • Total Pages
      50
    • Publisher
      Elsevier
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Book] Encycropedia of Theremal Stresses2013

    • Author(s)
      Tatsuo Inoue
    • Total Pages
      100
    • Publisher
      Springer
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Book] Encyclopedia of Iron, Steel, and Their Alloys2013

    • Author(s)
      Tatsuo Inoue
    • Total Pages
      30
    • Publisher
      Taylor & Francis
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Book] Progress and Mechanism of Welding Residual Stress and Distortion2006

    • Author(s)
      井上達雄
    • Total Pages
      27
    • Publisher
      Woodhead Publishing Ltd.
    • Data Source
      KAKENHI-PROJECT-17360279
  • [Book] Progress and Mechanism of Welding Residual Stress and Distortion2005

    • Author(s)
      井上 達雄
    • Total Pages
      27
    • Publisher
      Woodhead Publishing Ltd.
    • Data Source
      KAKENHI-PROJECT-17360279
  • [Book] 3.Thermal-metallurgical-mechanical Interactions during Welding (Progress and Mechanism of Weldinig Residual Stress and Distortion)2005

    • Author(s)
      Tatsuo Inoue
    • Total Pages
      26
    • Publisher
      Woodhead Publishing Co.
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] 変態塑性2015

    • Author(s)
      井上達雄
    • Journal Title

      材料

      Volume: 64 Pages: 247-257

    • NAID

      130005064893

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Journal Article] 窒化におけるひずみと残留応力==窒化とそれによる応力のシミュレーション(第2報)2014

    • Author(s)
      井上達雄
    • Journal Title

      材料

      Volume: 63 Pages: 7-13

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Journal Article] 窒化における窒素濃度,化合物生成と体積変化==窒化とそれによる応力のシミュレーション(第1報)2014

    • Author(s)
      井上達雄
    • Journal Title

      材料

      Volume: 63 Pages: 1-6

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Journal Article] 窒化におけるひずみと残留応力2014

    • Author(s)
      井上達雄
    • Journal Title

      材料

      Volume: 63 Pages: 741-745

    • NAID

      130004699365

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Journal Article] 窒化における窒素濃度、化合物性生成と体積変化2014

    • Author(s)
      井上達雄
    • Journal Title

      材料

      Volume: 63 Pages: 735-740

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Journal Article] Mechanics of Transformation Plasticity and Metallo-thermo-mechanical Process Simulation2012

    • Author(s)
      Tatsuo Inoue
    • Journal Title

      Proceedings of 2012 Creep Conference

      Volume: 1 Pages: 101-108

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Journal Article] Conventional Method for Simulation of Nitriding Process and Induced Stress2012

    • Author(s)
      Tatsuo Inoue
    • Journal Title

      Proceeding of 20th International Federation of Heat Treatment and Surface Engineering

      Volume: 1 Pages: 833-836

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Journal Article] Simulation of Quenched Japanese Short Swords made of Several Kinds of Materials2012

    • Author(s)
      Tatsuo Inoue
    • Journal Title

      Proceedings of the 6th International Quenching and Control of Distortion Conference

      Volume: 1 Pages: 575-588

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Journal Article] 曲げ加工した平板の焼入れ過程のシミュレーションとそれに及ぼす変態塑性効果、熱処理2011

    • Author(s)
      井上達雄、岸本飛鳥
    • Volume
      51
    • Pages
      224-232
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Journal Article] Mechanics and Characteristics of Transformation Plasticity and Metallo-thermo-mechanical Process Simulation2011

    • Author(s)
      Tatsuo Inoue
    • Journal Title

      Procedia Engineering

      Volume: 10 Pages: 223-228

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Journal Article] Unified theory of transformation plasticity and the effect on quenching simulation2011

    • Author(s)
      Tatsuo Inoue
    • Journal Title

      Strojarstvo

      Volume: 53 Pages: 11-18

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Journal Article] 曲げ加工した平板の焼入れ過程のシミュレーションとそれに及ぼす変態塑性効果2011

    • Author(s)
      井上達雄, 岸本飛鳥
    • Journal Title

      熱処理

      Volume: 51 Pages: 224-232

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Journal Article] Science of Tatara and the Japanese Sword2010

    • Author(s)
      Tatsuo Inoue
    • Journal Title

      Acta Mechanica

      Volume: 214 Pages: 17-30

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Journal Article] Mechanism of Transformation Plasticity and the Unified Constitutive Equation for Transformation-Thenno-Mechanical Plasticity with Some Applications2010

    • Author(s)
      Tatsuo Inoue
    • Journal Title

      International Journal of Microstructure and Materials Properties

      Volume: 5 Pages: 319-326

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Journal Article] Naoki Wakabayashi, Yoshitaka Hirabayashi and Nobutada Ohno, An atomistic study of grain boundary stability and crystal rearrangement using molecular dynamics techniques2009

    • Author(s)
      田中友浩、井上達雄
    • Journal Title

      International Journal of Mechanical Sciences 50

      Pages: 956-965

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Journal Article] Mechanism of Transformation Plasticity and the Unified Constitutive Equation for Transformation-Thermo-Mechanical Plasticity with Some Applications2009

    • Author(s)
      井上達雄
    • Journal Title

      Proceedings of Asian Pacific Conference for Materials and Mechanics 2009, Yokohama, 2009

      Pages: 201-210

    • Data Source
      KAKENHI-PROJECT-21560104
  • [Journal Article] パーライト変態における変態塑性係数の同定とその化学成分依存性2009

    • Author(s)
      田中友浩、井上達雄
    • Journal Title

      材料 57

      Pages: 697-700

    • NAID

      130002085790

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Journal Article] Constitutive Formula for Unified Transformation and Thermo-mechanical Plasticity with Some Applications2009

    • Author(s)
      井上達雄
    • Journal Title

      Proceedings of the 17^<th> International Federation for Heat Treatment and Surface Engineering(IFHTSE)Congress, Kobe

      Pages: 697-700

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Journal Article] Unified Theory of Transformation Plasticity and the Effect on Quenching Simulation2009

    • Author(s)
      Tatsuo Inoue, Hideto Wakamatsu
    • Journal Title

      Proceedings of the International Conference on New Challenges in Heat Treatment and Surface Engineering, Croatia

      Pages: 1-8

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Journal Article] 変態塑性現象のメカニズムと温度・応力変動下での弾塑性挙動-統合型変態・熱塑性理論の応用2008

    • Author(s)
      井上 達雄
    • Journal Title

      材料 57・3

      Pages: 225-230

    • NAID

      130002085751

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17360279
  • [Journal Article] 変態塑性現象のメカニズムと温度・応力変動下での弾塑性挙動-統合型変態・熱塑性理論の応用2008

    • Author(s)
      井上 達雄
    • Journal Title

      材料 57.3

      Pages: 225-230

    • NAID

      130002085751

    • Data Source
      KAKENHI-PROJECT-17360279
  • [Journal Article] On Phenomenological Mechanism of Transformation Plasticity and Inelastic Behavior of a Steel Subjected to Varying Temperature and Stress-Application of Unified Transformation-Thermo plasticity Theory2008

    • Author(s)
      Tatsuo INOUE, et. al.
    • Journal Title

      Journal of The Society of Materials Science Vol.57-3

      Pages: 225-230

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360279
  • [Journal Article] 統合型変態・熱塑性構成式理論とその応用2007

    • Author(s)
      井上達雄
    • Journal Title

      材料 56巻4号

      Pages: 421-525

    • NAID

      130002085874

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] On the Material Process Simulation Code COSMAP - Simulation examples and its experimental verification for heat treatment process2007

    • Author(s)
      Dong-Ying Ju, Tatsuo Inoue
    • Journal Title

      Sciences (ICCES'07)

      Pages: 1411-1416

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] 統合型変態・熱塑性構成式理論とその応用2007

    • Author(s)
      井上達雄
    • Journal Title

      材料 56・4

      Pages: 421-525

    • NAID

      130002085874

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] On the Material Process Simulation Code COSMAP - Simulation examples and its experimental verification for heat treatment process2007

    • Author(s)
      Dong-Ying Ju, Tatsuo Inoue
    • Journal Title

      Advances in Computational & Experimental Engineering and Sciences (Proceedings of International Conference on Computational and Experimental Engineering and Sciences (ICCES'07))

      Pages: 1411-1416

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] On the Material Process Simulation Code COSMAP-Simulation examples and its experimental verification for heat treatment process2007

    • Author(s)
      Dong-Ying Ju, Tatsuo Inoue
    • Journal Title

      Sciences (ICCES'07))

      Pages: 1411-1416

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Development and Simulation Tool for Optimizing Conditions of Carburized Quenching Process2006

    • Author(s)
      Youichi Watanabe, Tatsuo Inoue, Dong-Ying Ju, Hayato Shichino, Kazuo Okamura, Michiharu Narazaki, Hideo Kanamori, Katsumi Ichitani
    • Journal Title

      Proceedings of 36^<th> FISITA World Automotive Congress, Yokohama (CD-publised)

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Development and Simulation Tool for Optimizing Conditions of Carburized Quenching Process,2006

    • Author(s)
      Youichi Watanabe, Tatsuo Inoue, Dong-Ying Ju, Hayato Shichino, Kazuo Okamura, Michiharu Narazaki, Hideo Kanamori, Katsumi Ichitani
    • Journal Title

      Proceedings of 36^<th> FISITA World Automotive Congress, Yokohama

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] 変態・熱・力学と相変態を伴う過程のCAEへの応用2006

    • Author(s)
      井上達雄
    • Journal Title

      第8期非線形CAE研究会勉強会資料,CAE研究会

      Pages: 1-24

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Cooperative Research to Optimize Heat Treating Process Condition by Computer Based Technology2006

    • Author(s)
      Youichi Watanabe, Dong-Ying Ju, Hayato Shichino, Kazuo Okamura, Michiharu Narazaki, Hideo Kanamori, Katsumi Ichitani, Tatsuo Inoue
    • Journal Title

      Solid State Phenomena Vol.16

      Pages: 349-354

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Development and Verification of Virtual Heat Treatment Tool by Cooperative Research Project VHT2006

    • Author(s)
      Dong-Ying Ju, Youichi Watanabe, Hayato Shichino, Kazuo Okamura, Michiharu Narazaki, Hideo Kanamori, Katsumi Ichitani, Tatsuo Inoue
    • Journal Title

      Proceedings of IMS Vision Forum 2006 & Project Meeting, Korea-Seoul

      Pages: 319-324

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Simulation and Experimental Verification of Carburized and Nitrided Quenching Process2006

    • Author(s)
      Dong-Ying Ju, Yosuke Ito, Tatsuo Inoue
    • Journal Title

      Proceedings of 3rd International Conference on Thermal Process Modellig and Simulation (CD-publised)

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Simulation and Experimental Verification of Carburized and Nitrided Quenching Process2006

    • Author(s)
      Dong-Ying Ju, Yosuke Ito, Tatsuo Inoue
    • Journal Title

      Proceedings of 3rd International Conference on Thermal Process Modeling and Simulation

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] 材料力学の教科書は正しいか2006

    • Author(s)
      井上達雄
    • Journal Title

      機械の研究 58巻,1号

      Pages: 1-6

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Cooperative Research to Optimize Heat Treating Process Condition by Computer Based Technology2006

    • Author(s)
      Youichi Watanabe, Dong-Ying Ju, Hayato Shichino, Kazuo Okamura, Michiharu Narazaki, Hideo Kanamori, Katsumi Ichitani, Tatsuo Inoue
    • Journal Title

      Solid State Phenomena Vol.118

      Pages: 349-354

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Development and Simulation Tool for Optimizing Conditions of Carburized Quenching Process2006

    • Author(s)
      Youichi Watanabe, Tatsuo Inoue, Dong-Ying JuあHayato Shichino, Kazuo Okamura, Michiharu Narazaki, Hideo Kanamori, Katsumi Ichitani
    • Journal Title

      Proceedings of 36^<th> FISITA World Automotive Congress, Yokohama (CD-publised)

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Simulation and Experimental Verification of Carburized and Nitrided Quenching Process2006

    • Author(s)
      Dong-Ying Ju, Yosuke Ito, Tatsuo Inoue
    • Journal Title

      Proceedings of 3rd International Conference on Thermal Process Modelling and Simulation (CD-published)

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Hyperbolic Thermoelastic Analysis due to Pulsed Heat Input by Numerical Simulation2006

    • Author(s)
      Ning Yu, Shoji Imatani, Tatsuo Inoue
    • Journal Title

      JSME International Ser.A Vol.49 No.2

      Pages: 180-187

    • NAID

      110004683591

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Development and Verification of Virtual Heat Traetment Tool by Coperative Reserch Project VHT2006

    • Author(s)
      Dong-Ying Ju, Youichi Watanabe, Hayato Shichino, Kazuo Okamura, Michiharu Narazaki, Hideo Kanamori, Katsumi Ichitani, Tatsuo Inoue
    • Journal Title

      Proceedings of IMS Vison Forum 2006 & Project Meeting, Korea-Seoul

      Pages: 319-324

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Hyperbolic Thermoelastic Analysis due to Pulsed Heat Input by Numerical Simulation2006

    • Author(s)
      Ning Yu, Shoji Imatani, Tatsuo Inoue
    • Journal Title

      JSME International, Ser.A Vol.49,No.2

      Pages: 180-197

    • NAID

      110004683591

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Recent Development of Heat Treating Simulation in Japan2005

    • Author(s)
      Tatsuo Inoue, Youichi Watanabe, Kazuo Okamura, Michiharu Narazaki, Hayato Shichino, Dong-Ying Ju, Hideo Kanamori, Katsumi Ichitani
    • Journal Title

      Proceedings of 1st International Conference on Distortion Engineering, Bremen 2005-9

      Pages: 133-140

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Identification of Transformation Plastic Behavior relevant for Heal Treatment Simulation2005

    • Author(s)
      Tatsuo Inoue, Tomohiro Tanaka
    • Journal Title

      Proceedings of 3^<rd> Asian Conference on Heat Treatment of Materials, Gyeongju 2005-11

      Pages: 121-123

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] 熱処理シミュレーションコードの開発とその検証2005

    • Author(s)
      巨 東英, 井上達雄
    • Journal Title

      IMSプロジェクト平成16年度研究成果報告集,IMSセンター (CD)

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] A Simple Identification of Transformation Plastic Behavior and Some Data for Heat Treating Materials2005

    • Author(s)
      Takayuki Otsuka, Yutaka Wakasu, Tatsuo Inoue
    • Journal Title

      International Journal of Materials and Product Technology Vol.24, Nos,1-4

      Pages: 298-311

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Makro-Mezo-I Mikroskopowe Sposoby Oceny Przemian Fazowych w Metalach Uwzglednajace Proces Symulacji Komputerowej2005

    • Author(s)
      井上達雄
    • Journal Title

      Inzynieria powierzchni 1

      Pages: 23-35

    • Data Source
      KAKENHI-PROJECT-17360279
  • [Journal Article] Recent Development of Heat Treating Simulation in Japan2005

    • Author(s)
      井上達雄
    • Journal Title

      Proceedings of 1st International Conference on Distortion Engineering

      Pages: 133-140

    • Data Source
      KAKENHI-PROJECT-17360279
  • [Journal Article] 熱処理CAEの現状と将来2005

    • Author(s)
      井上達雄
    • Journal Title

      熱処理技術協会平成17年度春季講演会論文集 58巻,1号

      Pages: 1-10

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Cooperative Research to Optimize Heat Treating Process Condition by Compute Technology2005

    • Author(s)
      井上達雄
    • Journal Title

      Proceedings of 3^<rd> Asian Conference on Heat Treatment of Materials

      Pages: 370-372

    • Data Source
      KAKENHI-PROJECT-17360279
  • [Journal Article] A Simple Identification of Transformation Plastic Behavior and Some Data for Heat Treating Materials2005

    • Author(s)
      井上達雄
    • Journal Title

      International Journal of Materials and Product Technology 24・1-4

      Pages: 298-311

    • Data Source
      KAKENHI-PROJECT-17360279
  • [Journal Article] Identification of Transformation Plastic Behavior relevant for Heat Treatment Simulation2005

    • Author(s)
      井上達雄
    • Journal Title

      Proceedings of 3^<rd> Asian Conference on Heat Treatment of Materials

      Pages: 121-123

    • Data Source
      KAKENHI-PROJECT-17360279
  • [Journal Article] Cooperative Research to Optimize Heat Treating Process Condition by Compute Technology2005

    • Author(s)
      Youichi Watanabe, Dong-Ying Ju, Hayato Shichino, Kazuo Okamura, Michiharu Narazaki, Hideo Kanamori, Katsumi Ichitani, Tatsuo Inoue
    • Journal Title

      Proceedings of 3^<rd> Asian Conference on Heat Treatment o Materials, Gyeongju 2005-11

      Pages: 370-372

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] Makro-Mezo-I Mikroskopowe Sposoby Oceny Przemian Fazowych w Metalach Uwzglednajace Proces Symulacji Komputerowej2005

    • Author(s)
      Tatsuo Inoue
    • Journal Title

      Inzynieria powierzchni No.1

      Pages: 23-35

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Journal Article] たたらと日本刀の科学(第2部)2005

    • Author(s)
      井上達雄
    • Journal Title

      工業加熱 42巻,3号

      Pages: 3-9

    • Data Source
      KAKENHI-PROJECT-17560085
  • [Presentation] 格子パラメータを用いた浸炭、窒化と相変態中のひずみ推定の試み2014

    • Author(s)
      井上達雄
    • Organizer
      材料学会63期総会講演会
    • Place of Presentation
      福岡大学
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Presentation] ガス窒化における窒素濃度と窒化物の逐次解析と弾塑性応力2014

    • Author(s)
      井上達雄
    • Organizer
      熱処理技術協会 第77回講演大会 講演概要集
    • Place of Presentation
      東京工業大学
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Presentation] 窒化における化合物と応力の簡易解析2013

    • Author(s)
      井上達雄
    • Organizer
      日本材料学会第62期総会
    • Place of Presentation
      東京工業大学
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Presentation] ガス窒化における窒化物生成によるひずみと残留応力2013

    • Author(s)
      井上達雄、住田雅樹
    • Organizer
      熱処理技術協会 第76回講演大会 講演概要集
    • Place of Presentation
      名城大学
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Presentation] ガス窒化における各相への逐次拡散に基づく窒素濃度分布2013

    • Author(s)
      住田雅樹、井上達雄
    • Organizer
      熱処理技術協会 第76回講演大会 講演概要集
    • Place of Presentation
      名城大学
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Presentation] Stoichiometric Simulation of Nitriding and Induced Stresses2013

    • Author(s)
      Tatsuo Inoue
    • Organizer
      Barcelona
    • Place of Presentation
      Barcelona
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Presentation] 窒化における窒素と窒化物および応力分布の解析2013

    • Author(s)
      井上達雄
    • Organizer
      熱処理技術協会
    • Place of Presentation
      東京工業大学
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Presentation] Nitrogen Concentration due to Nitride Formation and Elastic-plastic Stress in the Course of Nitriding Process2013

    • Author(s)
      Tatsuo Inoue
    • Organizer
      Asia-Pacific Conference on Computational Mechanics
    • Place of Presentation
      Singapole
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Presentation] 変態塑性特性の非実験的同定と基本材料データ2012

    • Author(s)
      井上達雄
    • Organizer
      日本材料学会第61期総会
    • Place of Presentation
      岡山大学
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Presentation] Transformation Plasticity--Identification of TP coefficient by Nonexperimaental Mehod2012

    • Author(s)
      Tatsuo Inoue
    • Organizer
      6th International Quenching and Control of Distortion Conference
    • Place of Presentation
      Chicago
    • Invited
    • Data Source
      KAKENHI-PROJECT-24560118
  • [Presentation] 変態塑性特性の解析的同定と検証2011

    • Author(s)
      井上達雄
    • Organizer
      日本機械学会第24回計算力学講演会
    • Place of Presentation
      岡山
    • Year and Date
      2011-10-09
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Presentation] 変態塑性特性の解析的同定と検証2011

    • Author(s)
      井上達雄
    • Organizer
      日本機械学会第24回計算力学講演会
    • Place of Presentation
      岡山大学(岡山県)
    • Year and Date
      2011-10-09
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Presentation] Mechanics and Characteristics of Transformation Plasticity and Metallo-thermo-mechanical Process Simulation2011

    • Author(s)
      Tatsuo Inoue
    • Organizer
      The 11th International Conference on the Mechanical Behavior of Materials
    • Place of Presentation
      Villa Erba (Como, Italy)
    • Year and Date
      2011-05-08
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Presentation] Mechanics and Characteristics of Transformation Plasticity and Metallo-thermo-mechanical Process Simulation2011

    • Author(s)
      Tatsuo Inoue
    • Organizer
      The 11th International Conference on the Mechanical Behavior of Materials
    • Place of Presentation
      Como, Italy
    • Year and Date
      2011-05-08
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Presentation] 変態塑性係数の解析的算出の試み2011

    • Author(s)
      井上達雄
    • Organizer
      日本材料学会第60期学術講演会
    • Place of Presentation
      大阪大学(大阪府)
    • Year and Date
      2011-05-26
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Presentation] 変態塑性係数の解析的算出の試み2011

    • Author(s)
      井上達雄
    • Organizer
      日本材料学会第60期学術講演会
    • Place of Presentation
      大阪
    • Year and Date
      2011-05-26
    • Data Source
      KAKENHI-PROJECT-21560104
  • [Presentation] 窒化における窒素と応力の変化

    • Author(s)
      井上達雄
    • Organizer
      材料学会64期総会講演会
    • Place of Presentation
      山形大学工学部
    • Year and Date
      2015-05-23 – 2015-05-24
    • Data Source
      KAKENHI-PROJECT-24560118
  • 1.  IMATANI Shoji (70191898)
    # of Collaborated Projects: 13 results
    # of Collaborated Products: 0 results
  • 2.  HOSHIDE Toshihiko (80135623)
    # of Collaborated Projects: 10 results
    # of Collaborated Products: 0 results
  • 3.  UEHARA Takuya (50311741)
    # of Collaborated Projects: 7 results
    # of Collaborated Products: 0 results
  • 4.  JU Dong-ying (10255143)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 16 results
  • 5.  MIZUNO Mamoru (70239250)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 6.  OHNO Nobutada (30115539)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 7.  TSUTSUMI Mitsuyoshi (70293925)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 8.  IGARI Toshihide
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 9.  WATANABE Youichi (60515154)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 10.  MUKAI Ryuji (40398540)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 11.  KAWAI Masamichi (90169673)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 12.  YOSHIDA Fusahito (50016797)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 13.  TANAKA Kikuaki (80081256)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 14.  MINAMI Koichi (10079519)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 15.  NAKAHIGASHI Jun (40341200)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 16.  MIYAUCHI Katsuyuki (80368779)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 17.  UENOYA Minoru (40034376)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 18.  TERAI Masakazu (90320035)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 19.  SAKANE Masao (20111130)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 20.  OKAZAKI Masakazu (00134974)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 21.  TSUTA Toshio (80221414)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 22.  SUZUKI Kenjiro (00026064)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 23.  新津 靖 (70143659)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 24.  梨原 宏 (40128971)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 25.  雫石 勝蔵 (00085482)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 26.  望月 正人 (10304015)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 27.  村上 澄男 (10023053)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 28.  ARIMOTO Kyozo
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 29.  IKUTA Fumiaki
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 30.  OKAMURA Kazuo
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 31.  鈴木 章彦
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 32.  SUZUKI Akihiko
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi