MURATA Makoto 村田眞

… Alternative Names

村田真ムラタマコト

Less

Researcher Number	10106883
Other IDs
Affiliation (based on the past Project Information) *help	2013: 電気通信大学, 情報理工学研究科, 教授 2011 – 2012: 電気通信大学, 情報理工学(系)研究科, 教授 2010 – 2012: 電気通信大学, 大学院・情報理工学研究科, 教授 2009: The University of Electro-Communications, 電気通信学部, 教授 2008: The University of Electro-Communications, 電気通信学部・知能機械工学科, 教授 2004 – 2007: 電気通信大学, 電気通信学部, 教授 1991 – 1992: 電気通信大学, 電気通信学部, 助教授
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / Material processing/treatments Except Principal Investigator Production engineering/Processing studies / 金属加工(含鋳造) / Material processing/treatments
Keywords	Principal Investigator 塑性加工 / 有限要素解析 / フレキシブルな形状 / 有限要素法 / クリアランス / 工具傾斜角 / せん断 / 板材 / 材料加工・処理 / 押出し形材 / 押出加工 … More Except Principal Investigator … More 塑性加工 / Cold metal forming / upsetting / Fraction of ferrite / Transfer of carbon / Strain hardening / Diffusion of carbon / Aging / 硬化率 / 時効効果 / 圧造加工 / すえ込み加工 / フェライト分率 / 炭素の伝達係数 / 時効硬化 / 炭素の拡散 / 時効 / FEM / forming limit / salt bath liquid / high temperature liquid / bulging / sheet forming / 加工性拡大 / 高温変形 / 液体バルジ / 塩浴剤 / 加工性の拡大 / 高温液圧 / バルジ加工 / 板材成形 / 異方性 / CFD / 引抜き / 塑性変形解析 / 数値流体力学 / 有限要素法 / Navier-Stokes方程式 / 潤滑 / 高圧水 / 深絞り加工 / Reynolds方程式 / 塑性変形-流体連成解析 Less

New Shearing by Moving Tool in In-plane DirectionPrincipal Investigator
- Principal Investigator
  
  MURATA Makoto
- Project Period (FY)
  2011 – 2012
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  The University of Electro-Communications
A Numerical Analysis of Metal Forming Considering Fluid Behavior of Lubricant
- Principal Investigator
  
  KUBOKI Takashi
- Project Period (FY)
  2010 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  The University of Electro-Communications
Circular Tube with Holed Rib by ExtrusionPrincipal Investigator
- Principal Investigator
  
  MURATA Makoto
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  The University of Electro-Communications
Prediction of deformation in fast cold metal forming based on microstructure
- Principal Investigator
  
  KUBOKI Takashi
- Project Period (FY)
  2004 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  The University of Electro-Communications
Study of Extension for Forming Limit of Sheet Metal at High Temperature
- Principal Investigator
  
  SUZUKI Hideo
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  University of Electro-Communications

All 2013 2012 2011 2010 2009 2008 2007 2005 2004 Other

All Journal Article Presentation Book Patent

[Book] 最新機器要素技術編集共著 : 最新機器要素技術第3章 3.7円管の加工(チューブフォーミング)2008
- Author(s)
  村田眞
- Publisher
  (有)エヌジーティー
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] Prediction of stress-strain diagram from forming load in stretch forming2012
- Author(s)
  T. Kuboki, Y. Jin, M. Murata
- Journal Title
  
  Int. J. Mech. Sci.
  
  Volume: No.60 Pages: 46-53
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360303
[Journal Article] Effect of clearance on new shearing method with horizontal tool movement of 1100 aluminum sheet2011
- Author(s)
  Datao Lu, Makoto Murata,Takashi Kuboki
- Journal Title
  
  Int.Adv Manuf Technol
  
  Volume: Vol.57 Pages: 647-653
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656100
[Journal Article] Effect of clearance on new shearing method with horizontal tool movement of 1100 aluminum sheet2011
- Author(s)
  Datao Lu, Murata Makoto, Kuboki Takashi
- Journal Title
  
  Int J Adv Manuf Technol
  
  Volume: Vol.57 Pages: 647-653
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656100
[Journal Article] A5083厚板の曲げ加工におけるスプリングバックに及ぼす曲げ型形状の影響2011
- Author(s)
  ハムタナランバータル, 村田眞, 久保木孝, 柴田隆浩, 金英俊
- Journal Title
  
  塑性と加工
  
  Volume: 53 Pages: 362-3666
- NAID
  10030144923
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360303
[Journal Article] 荷重制御による高精度曲げ加工2011
- Author(s)
  柴田隆浩, 金英俊, 小山純一, 久保木孝, 村田眞
- Journal Title
  
  塑性と加工
  
  Volume: 53 Pages: 64-68
- NAID
  10030028199
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360303
[Journal Article] 工具を水平に移動させる新しいせん断加工と従来のせん断加工との加工力および切口面の比較2011
- Author(s)
  路大　涛，村田　眞，久保木　孝
- Journal Title
  
  軽金属
  
  Volume: 第61巻 Pages: 100-106
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656100
[Journal Article] 工具を水平方向に移動させる新しいせん断加工と従来のせん断との加工力および切口面の比較2011
- Author(s)
  路大涛,村田眞,久保木孝,金英俊(アマダ)
- Journal Title
  
  軽金属学会誌
  
  Volume: 第61巻,第3号 Pages: 100-106
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656100
[Journal Article] Effect of Initial Thickness Deviation on Deformed Tube Shahe in Tube Spinning2010
- Author(s)
  Takashi Ruboki, Naoto Takahashi, Iiazuhito Takahashi, Kazuhiko Sanda, Susumu Moriya, Keisuke Ishida, Makoto Murata
- Journal Title
  
  Steel Research Liternational
  
  Volume: 81 Pages: 978-981
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360303
[Journal Article] Effect of tube wall thickness in Joining of Aluminum Tube and Holed Rib by Extrusion2010
- Author(s)
  Tsutomu Moroi, Takashi Kuboki, Makoto Murata
- Journal Title
  
  Key Engineering Materials Vol.4 24
  
  Pages: 121-128
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] Composite structure composed of overlapped fibre bundles, thermoplastic resin and metal plate for secondary forming process2010
- Author(s)
  Takashi Kuboki, Shun-ichi Uematsu, Makoto Murata
- Journal Title
  
  Composites Science and Technology
  
  Volume: 70 Pages: 1338-1345
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360303
[Journal Article] Effect of Tube wall thickness in Joining of Aluminum and Holed Rib by Extrusion2010
- Author(s)
  Tsutomu Moroi, Takashi Kuboki, Makoto Murata
- Journal Title
  
  Vol.424
  
  Pages: 121-128
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] Computational Method of SpringUack in-Vbending of Sheet Having Bausching Effect2010
- Author(s)
  Kazunari Imai, Jin Yingjun, Hiroki Tsuruta, Junichi Koyama, Takashi Kuboki, Makoto Murata
- Journal Title
  
  Steel Research International
  
  Volume: 81 Pages: 757-760
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360303
[Journal Article] Composite structure composed of overlapped fibre bundles, thermoplastic resin and metal plate for secondary forming process2010
- Author(s)
  T. Kuboki, S. Uematsu, M. Murata
- Journal Title
  
  Compos. Sci. and Technol.
  
  Volume: Vol.70, No.9 Pages: 1338-1345
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360303
[Journal Article] An analytical method of metal forming considering ageing in the microstructure for carbon steel2010
- Author(s)
  Takashi Kuboki, Makoto Murata DRJ Owen
- Journal Title
  
  Computers and Structures
  
  Volume: 88 Pages: 1162-1178
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360303
[Journal Article] 凹型ロールを用いた伸線加工におけるクラッシュと張力が減率に及ぼす影響2009
- Author(s)
  久保木孝, 仙崎泰慎, 村田眞, 中村友彦
- Journal Title
  
  日本塑性加工学会,学会誌「塑性と加工」第50巻第582号
  
  Pages: 447-450
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] 板材のL曲げ加工におけるパンチの軌跡半径の影響2009
- Author(s)
  小山純一, 金英俊, 今井一成, 久保木孝, 村田眞
- Journal Title
  
  日本塑性加工学会,学会誌「塑性と加工」第50巻第586号
  
  Pages: 57-61
- NAID
  10025446539
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] Effect of Temperature on Tube Extrusion and Joining Holed Rib2008
- Author(s)
  Tsutomu Moroi, Takashi Kuboki, Makoto Murata
- Journal Title
  
  METAL FORMING Vol. 1
  
  Pages: 677-682
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] Effect of Temperature on Tube Extrusion and Joining Holed Rib2008
- Author(s)
  Tsutomu Moroi, Takashi Kuboki, Makoto Murata
- Journal Title
  
  METAL FORMING Vol.1
  
  Pages: 667-684
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] 押出による1050アルミニウム円管と穴あきリブの接合2008
- Author(s)
  諸井努, 久保木孝, 仙崎泰慎, 村田眞
- Journal Title
  
  軽金属学会誌第58巻,第6号
  
  Pages: 246-250
- NAID
  10021989301
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] 押出による1050アルミニウム円管と穴あきリブの接合2008
- Author(s)
  諸井努, 久保木孝, 村田眞
- Journal Title
  
  軽金属学会誌「軽金属」 58
  
  Pages: 246-250
- NAID
  10021989301
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] A New extrusion method joining tube and Sheet with Holed rib2007
- Author(s)
  MAKOTO MURATA etc
- Journal Title
  
  Journal of Mechanical Science and Technology 21
  
  Pages: 1548-1552
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] Effect of Plug on Leveling of Residual Stress in Tube Drawing2007
- Author(s)
  T.Kuboki, K.Nishida, T.Sakaki, M.Murata
- Journal Title
  
  Proceedings of Advances in Materials and Processing and Technologies
  
  Pages: 1052-1052
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] ミクロ組織を考慮した中炭素鋼の冷間加工におけるひずみ時効進行を予測する方法の提案2007
- Author(s)
  三宅章生, 高田恵美, 久保木孝, 村田眞
- Journal Title
  
  日本塑性加工学会第61回伸線技術分科会研究会資料
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] Effect of Plug on Leveling of Residual Stress in Tube Drawing2007
- Author(s)
  Takashi Kuboki, Keigo Nishida, Tomohiro Sakaki, Makoto Murata
- Journal Title
  
  Proceedings of Advances in Materials and Processing and Technologies
  
  Pages: 1052-1052
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] Improvement of forming limt by rotary nosing with a relieved die2007
- Author(s)
  MAKOTO MURATA etc
- Journal Title
  
  IMech: J. Engineering Manufacture 222
  
  Pages: 245-253
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] Thickness Optimization of Axisymmetric Tube Extruded by A New Method Using Tapered Mandrel2007
- Author(s)
  MAKOTO MURATA etc
- Journal Title
  
  Industrial Perspective of Numerical Forming Proc esses 9
  
  Pages: 370-373
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] Effect of die corner radius on the formability and dimensional accuracy of tube shear bending2007
- Author(s)
  MAKOTO MURATA etc
- Journal Title
  
  International J Adv Manufacturing Technology 35
  
  Pages: 66-74
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560721
[Journal Article] The Effect of Pushing Force on the Shear Bending Process of Circular Tubes2005
- Author(s)
  Mohammad Goodarzi, Takashi Kuboki, Makoto Murata
- Journal Title
  
  7th International Conference on Technology for Plasticity
  
  Pages: 79-80
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] Evaluation Method of Microstructure for Prediction of Ageing Progress in Hypo-eutectoid Carbon Steel2005
- Author(s)
  Takashi Kuboki, Akio Miyake, Makoto Murata, Roger Owen
- Journal Title
  
  Computational Plasticity, COMPLAS 8th, Barcelona
  
  Pages: 978-983
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] Prediction of Static Strain Hardening Progress from Cementite Morphology in Hypo-eutectoid Carbon Steel2005
- Author(s)
  Takashi Kuboki, Megumi Takada, Makoto Murata
- Journal Title
  
  Journal of Materials Science and Technology (IOM3) 21-7
  
  Pages: 803-812
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] Prediction of Static Strain Hardening Progress from Cementite Morphology in Hypo-eutectoid Carbon Steel2005
- Author(s)
  Takashi Kuboki, Megumi Takada, Makoto Murata
- Journal Title
  
  Journal of Materials Science and Technology (IOM3) 21・7
  
  Pages: 803-812
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] Simulation for Flat Hemming of Aluminum Sheet Metal2005
- Author(s)
  Murata Makoto, Takashi Kuboki
- Journal Title
  
  7th International Conference on Technology for Plasticity
  
  Pages: 77-78
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] Prediction of Static Strain Hardening Progress from Cementite Morphology in Hypo-eutectoid Carbon Steel2005
- Author(s)
  Takashi Kuboki, Megumi Takada, Makoto Murata
- Journal Title
  
  Journal of Materials Science and Technology (IOM3) Vol.21 No.7
  
  Pages: 803-812
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] ミクロ組織を考慮した中炭素鋼のひずみ時効進行の予測法2004
- Author(s)
  三宅章生, 高田恵美, 久保木孝, 村田眞
- Journal Title
  
  第55回塑性加工連合講演会
  
  Pages: 463-464
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] ミクロ組織を考慮した中炭素銅のひずみ時効進行の予測法2004
- Author(s)
  三宅章生, 高田恵美, 久保木孝, 村田眞
- Journal Title
  
  第55回塑性加工連合講演会
  
  Pages: 463-464
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] Deep drawing with high-pressured water jet using ditch-engraved die
- Author(s)
  Y. Horikoshi, T. Kuboki, M. Murata, K. Matsui, M. Tsubokura
- Journal Title
  
  Procedia Engineering
  
  Volume: (accepted)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360303
[Journal Article] Evaluation Method of Microstructure for Prediction of Ageing Progress in Hypo-eutectoid Carbon Steel
- Author(s)
  Takashi Kuboki, Akio Miyake, Makoto Murata, Roger Owen
- Journal Title
  
  Computational Plasticity(COMPLAS)(Barcelona) 8th
  
  Pages: 978-983
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560091
[Journal Article] Prediction of static strain hardening progress from cementite morp hology in hypo-eutectoid carbon steel
- Author(s)
  T.Kuboki, M.Takada, M.Murata
- Journal Title
  
  J.of Materials Science and Technology to appear
- Data Source
  KAKENHI-PROJECT-16560091
[Patent] 押出加工物の製造方法及び押出加工物2009
- Inventor(s)
  村田眞, 久保木孝, 牧山高大
- Industrial Property Rights Holder
  電気通信大学
- Filing Date
  2009
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] Evaluation of water film by Reynolds' equation in deep drawing using high-pressured water jet2013
- Author(s)
  Takashi Kuboki, Yuki Horikoshi, Makoto Murata, Kazumi Matsui, Makoto Tsubokura
- Organizer
  COMPLAS XII
- Place of Presentation
  Barcelona, Spain
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] 高圧水深絞り加工法における水膜挙動のReynolds方程式による評価2013
- Author(s)
  堀越祐樹, 久保木孝, 村田眞, 坪倉誠, 松井和己
- Organizer
  平成25年度塑性加工春季講演会講演論文集
- Place of Presentation
  名古屋
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] 高圧水深絞り加工法における水膜挙動のReynolds方程式による評価2013
- Author(s)
  堀越　祐樹, 久保木　孝, 村田　眞, 坪倉　誠, 松井　和己
- Organizer
  平成25年度塑性加工春季講演会
- Place of Presentation
  名古屋
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] Evaluation of water film by Reynolds' equation in deep drawing using high-pressured water jet2013
- Author(s)
  T. Kuboki, Y. Horikoshi, M. Murata, K. Matsui, M. Tsubokura
- Organizer
  COMPLAS XII
- Place of Presentation
  Barcelona
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] Lubrication characteristics of deep drawing with high-pressured water jet2012
- Author(s)
  T. Kuboki, H. Saito, Y. Tanaka, M. Murata, K. Matsui, M. Tsubokura
- Organizer
  Metal forming
- Place of Presentation
  Krakow
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] 高圧水を用いた深絞り加工における潤滑特性の検討2012
- Author(s)
  斉藤弘, 久保木孝, 村田眞, 坪倉誠, 松井和己
- Organizer
  平成24年度塑性加工春季講演会講演論文集
- Place of Presentation
  小松
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] Application of Homogenization Method considering Crystal Plasticity for Prediction of Mechanical Properties for Copper and Low Carbon Steel2011
- Author(s)
  Takuya Sueoka, Takashi Kuboki, Makoto Murata, Kouichi Kuroda, Kenjiro Terada
- Organizer
  COMPLAS XI
- Place of Presentation
  Barcelona, Spain
- Year and Date
  2011-09-08
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] 板材の新しいせん断加工における切断特性の解析および実験的検討2011
- Author(s)
  路大涛,村田眞,久保木孝,金英俊
- Organizer
  日本塑性加工学会,第62回塑性加工連合講演会
- Place of Presentation
  ホテル日航豊橋
- Data Source
  KAKENHI-PROJECT-23656100
[Presentation] 板材の新しいせん断加工における変形挙動の解析および実験的検討2011
- Author(s)
  路大涛,村田眞,久保木孝,金英俊
- Organizer
  軽金属学会,第120回春期大会講演会
- Place of Presentation
  名古屋大学
- Data Source
  KAKENHI-PROJECT-23656100
[Presentation] Spring-back Prediction by Combination of the Finite Element Analysis and Bent-beam Theory Considering Bauschinger effect2011
- Author(s)
  Toru Matsumoto, Shirmtarou Gotoh, Takashi Kuboki, Makoto Murata, Yingjun Jin
- Organizer
  COMPLAS XI
- Place of Presentation
  Barcelona, Spain
- Year and Date
  2011-09-07
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] 板材の新しいせん断加工における切断特性の解析および実験的検討2011
- Author(s)
  路　大涛，村田　眞，久保木　孝
- Organizer
  日本塑性加工学会
- Place of Presentation
  ホテル日航豊橋
- Data Source
  KAKENHI-PROJECT-23656100
[Presentation] Effect of Feeding Velocity on Formability in a New Micro-Drawing Process Using a Pair of Concave Rolls2011
- Author(s)
  Takashi Kuboki, Yasunori Senzaki, Makoto Murata
- Organizer
  ICOMM 2011
- Place of Presentation
  日本大学(東京都)
- Year and Date
  2011-03-09
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] Effect of Temperature in Formability of Composite Composed of Overlapped Fibre Bundle, Thermoplastic Resin and Metal2011
- Author(s)
  Takashi Kuboki, Shun-ichi Uematsu, Makoto Murata
- Organizer
  COMPLAS XI
- Place of Presentation
  Barcelona, Spain
- Year and Date
  2011-09-07
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] 板材の新しいせん断加工における変形挙動の解析および実験的検討2011
- Author(s)
  路　大涛，村田　眞，久保木　孝
- Organizer
  軽金属学会
- Place of Presentation
  名古屋大学
- Data Source
  KAKENHI-PROJECT-23656100
[Presentation] Mechanical Properties of Wire Drawn by a New Drawing Process Usinga Pair of Concave Rolls2010
- Author(s)
  Takashi Kuhoki, Kazumichi Aoki, Yaswiori Senzaki, Makoto Murata
- Organizer
  In-Tech 2010
- Place of Presentation
  チェコ・プラハ
- Year and Date
  2010-09-15
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] 加工履歴を有する金属材料の機械特性予測に関する研究2010
- Author(s)
  小栗潤一, 村田眞, 久保木孝, 黒田浩一, 寺田賢二郎
- Organizer
  日本塑性加工学会
- Place of Presentation
  電気通僑-大学(東京都)
- Year and Date
  2010-05-29
- Data Source
  KAKENHI-PROJECT-22360303
[Presentation] 薄肉管とリブの押出し接合における押出し比の影響2009
- Author(s)
  諸井努, 久保木孝, 村田眞
- Organizer
  日本塑性加工学会,平成21年度第60回塑性加工連合講演会,講演論文集
- Place of Presentation
  信州大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 083厚板のV曲げ加工における変形特性2009
- Author(s)
  ハムタ・ナランバータル, 村田眞, 久保木孝, 柴田隆浩, 金英俊
- Organizer
  軽金属学会,平成21年度軽金属学会第117回秋期大会講演概要
- Place of Presentation
  電気通信大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] アルミニウム円管と穴あけリブの押出し接合におけるリブ材質の影響2009
- Author(s)
  諸井努, 久保木孝, 村田眞
- Organizer
  軽金属学会,平成21年度軽金属学会第117回秋期大会講演概要
- Place of Presentation
  電気通信大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 局部的な熱影響を受けた炭素鋼の残留応力解析2009
- Author(s)
  伊藤敬, 村田眞, 久保木孝, 金英俊, 李若涛
- Organizer
  日本塑性加工学会,平成21年度塑性加工春季講演会(第40回)
- Place of Presentation
  京都大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 板材の新しいせん断加工における切り口面について2009
- Author(s)
  路大涛, 田中彰典, 村田眞, 久保木孝, 金英俊
- Organizer
  日本塑性加工学会,平成21年度第60回塑性加工連合講演会,講演論文集
- Place of Presentation
  信州大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 1100板の新しいせん断加工におけるクリアランスの影響2009
- Author(s)
  路大涛, 田中彰典, 村田眞, 久保木孝, 金英俊
- Organizer
  軽金属学会,平成21年度軽金属学会第117回秋期大会講演概要
- Place of Presentation
  電気通信大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 1100板の新しいせん断加工における厚さの影響2009
- Author(s)
  路大涛, 田中彰典, 金英俊, 久保木孝, 村田眞
- Organizer
  軽金属学会,平成21年度軽金属学会第116回春期大会講演概要
- Place of Presentation
  関西大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] Feasibility Study By Finite Element Analysis on Free Size Drawing Using" a Pair of Concave Rolls2009
- Author(s)
  Takashi Kuboki, Yasunori Senzaki, Makoto Murata
- Organizer
  COMPLAS X
- Place of Presentation
  Spain-Barcelona
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 薄肉管とリブの押出し接合における接合強度2009
- Author(s)
  諸井努, 久保木孝, 村田眞
- Organizer
  日本塑性加工学会, 春季講演会(第40回)
- Place of Presentation
  京都大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] Finite Element Analysisi and Experimaental Investigation on Circular Tube-Pure Bending2009
- Author(s)
  Kazuhito Takahashi, Takashi Kuboki, Makoto Murata
- Organizer
  4th International Conference on Tube Hydro forming
- Place of Presentation
  China-Taiwan National Sun Yat-Unvi.
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] アルミニウム円管と穴あきリブの押出し接合において管肉厚が成形品に及ぼす影響2009
- Author(s)
  諸井努, 久保木孝, 村田眞
- Organizer
  軽金属学会, 第116回春期大会講演会
- Place of Presentation
  登別グランドホテル
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 5083厚板のV曲げにおける変形挙動2009
- Author(s)
  ハムタ・ナランバータル, 村田眞, 久保木孝, 柴田隆浩, 金英俊
- Organizer
  軽金属学会,平成21年度軽金属学会第116回春期大会講演概要
- Place of Presentation
  関西大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] アルミニウム円管と穴あきリブの押出し接合において管肉厚が成形品形状2009
- Author(s)
  諸井努, 久保木孝, 村田眞
- Organizer
  軽金属学会,平成21年度軽金属学会第116回春期大会講演概要
- Place of Presentation
  関西大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] バウシンガー効果を考慮した板曲げスプリングバック予測に関する研究2009
- Author(s)
  後藤慎太郎, 久保木孝, 村田眞, 金英俊, 小俣均, 石上圭介
- Organizer
  日本塑性加工学会,平成21年度塑性加工春季講演会(第40回)
- Place of Presentation
  京都大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 厚板のV曲げにおける変形形状に及ぼす影響2009
- Author(s)
  KHAMT NARANBAATAR, 村田眞, 久保木孝, 柴田隆浩, 金英俊
- Organizer
  日本塑性加工学会,平成21年度第60回塑性加工連合講演会,講演論文集
- Place of Presentation
  信州大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 線材の径が凹ロール伸線加工法に及ぼす影響～第2報～2009
- Author(s)
  仙崎泰慎, 久保木孝, 村田眞
- Organizer
  日本塑性加工学会,平成21年度塑性加工春季講演会(第40回)
- Place of Presentation
  京都大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 口絞り加工を施したアルミニウム円管の局所材料特性予測2009
- Author(s)
  小栗潤一, 村田眞, 久保木孝, 鶴田浩基, 寺田賢二郎
- Organizer
  日本塑性加工学会,平成21年度塑性加工春季講演会(第40回)
- Place of Presentation
  京都大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 板材V曲げにおけるスプリングバックレス加工2009
- Author(s)
  柴田隆浩, 金英俊, 小山純一, 久保木孝, 村田眞
- Organizer
  日本塑性加工学会,平成21年度第60回塑性加工連合講演会,講演論文集
- Place of Presentation
  信州大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 鋼板の新しいせん断加工における工具クリアランスの影響2009
- Author(s)
  田中彰典, 路大涛, 村田眞, 久保木孝, 金英俊
- Organizer
  日本塑性加工学会,平成21年度塑性加工春季講演会(第40回)
- Place of Presentation
  京都大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 均等曲げにおける6063アルミニウム合金円管の変形挙動2009
- Author(s)
  高橋和仁, 久保木孝, 村田眞
- Organizer
  軽金属学会,平成21年度軽金属学会第117回秋期大会講演概要
- Place of Presentation
  電気通信大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 薄肉管とリブの押出し接合における接合強度2009
- Author(s)
  諸井努, 久保木孝, 村田眞
- Organizer
  日本塑性加工学会,平成21年度塑性加工春季講演会(第40回)
- Place of Presentation
  京都大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] アルミニウム円管と穴あけリブの押出し接合におけるリブ材質の影響2009
- Author(s)
  井努, 久保木孝, 村田眞
- Organizer
  軽金属学会, 第117回秋期大会講演会
- Place of Presentation
  電気通信大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 薄肉管とリブの押出し接合における押出し比の影響, 日本塑性加工学会2009
- Author(s)
  諸井努, 久保木孝, 村田眞
- Organizer
  第60回連合講演会
- Place of Presentation
  信州大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] Effect of Pre-strain History on Mechanical Characteristics in Aluminium 10702009
- Author(s)
  Takashi Ito, Makoto Murata, Takashi Kuboki, Jin Yingjun
- Organizer
  COMPLAS X
- Place of Presentation
  Spain-Barcelona
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 円管の均等曲げ加工2009
- Author(s)
  村田眞
- Organizer
  日本鉄鋼協会,第158回秋季講演大会「材料とプロセス」
- Place of Presentation
  京都大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] アルミニウム円管と穴つきリブの押出し接合における管肉厚の影響2008
- Author(s)
  諸井努, 久保木孝, 村田眞
- Organizer
  日本塑性加工学会第59回塑性加工連合講演会
- Place of Presentation
  広島大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 1050アルミニウム円管と穴あきリブの押出し接合2008
- Author(s)
  諸井努, 久保木孝, 仙崎泰慎, 村田眞
- Organizer
  軽金属学会, 第114回春期講演会
- Place of Presentation
  愛媛大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] アルミニウム円管と穴つきリブの押出し接合における管肉厚の影響2008
- Author(s)
  諸井努, 久保木孝, 村田眞
- Organizer
  日本塑性加工学会平成20年度第59回塑性加工連合講演会
- Place of Presentation
  広島大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 1050アルミニウムのリブ接合押出しにおける温度の影響2008
- Author(s)
  諸井努, 久保木孝, 仙崎泰慎, 村田眞
- Organizer
  日本塑性加工学会, 塑性加工学会春季講演会(第39回)
- Place of Presentation
  日本大学
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] Precise Control of Thickness in New Tube-Extrusion Method with Tapered Mandrel2007
- Author(s)
  MAKOTO MURATA
- Organizer
  2nd International Conference on New Forming Technology
- Place of Presentation
  Bremen
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] リブ接合押出しの変形特性の数値解析2007
- Author(s)
  村田眞
- Organizer
  (社)日本塑性加工学会第58回塑性加工連合講演会
- Place of Presentation
  札幌市教育文化会館
- Data Source
  KAKENHI-PROJECT-19560721
[Presentation] 1050アルミニウム円管と穴あきリブの押出し接合2007
- Author(s)
  諸井努, 久保木孝, 村田眞
- Organizer
  軽金属学会, 平成20年度軽金属学会第114回春期大会講演概要
- Place of Presentation
  愛媛大学
- Data Source
  KAKENHI-PROJECT-19560721

1. KUBOKI Takashi (90361823)

# of Collaborated Projects: 4 results

# of Collaborated Products: 77 results
2. MATSUI Kazumi (00377110)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
3. TSUBOKURA Makoto (40313366)

# of Collaborated Projects: 1 results

# of Collaborated Products: 7 results
4. SUZUKI Hideo (40017299)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

MURATA Makoto 村田 眞

村田 真 ムラタ マコト

Research Projects

Research Products

Co-Researchers

New Shearing by Moving Tool in In-plane DirectionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Numerical Analysis of Metal Forming Considering Fluid Behavior of Lubricant

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Circular Tube with Holed Rib by ExtrusionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Prediction of deformation in fast cold metal forming based on microstructure

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study of Extension for Forming Limit of Sheet Metal at High Temperature

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] 最新機器要素技術編集共著 : 最新機器要素技術 第3章 3.7円管の加工(チューブフォーミング)2008

Author(s)

Publisher

Data Source

[Journal Article] Prediction of stress-strain diagram from forming load in stretch forming2012

Author(s)

Journal Title

Data Source

[Journal Article] Effect of clearance on new shearing method with horizontal tool movement of 1100 aluminum sheet2011

Author(s)

Journal Title

Data Source

[Journal Article] Effect of clearance on new shearing method with horizontal tool movement of 1100 aluminum sheet2011

Author(s)

Journal Title

Data Source

[Journal Article] A5083厚板の曲げ加工におけるスプリングバックに及ぼす曲げ型形状の影響2011

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 荷重制御による高精度曲げ加工2011

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 工具を水平に移動させる新しいせん断加工と従来のせん断加工との加工力および切口面の比較2011

Author(s)

Journal Title

Data Source

[Journal Article] 工具を水平方向に移動させる新しいせん断加工と従来のせん断との加工力および切口面の比較2011

Author(s)

Journal Title

Data Source

[Journal Article] Effect of Initial Thickness Deviation on Deformed Tube Shahe in Tube Spinning2010

Author(s)

Journal Title

Data Source

[Journal Article] Effect of tube wall thickness in Joining of Aluminum Tube and Holed Rib by Extrusion2010

Author(s)

Journal Title

Data Source

[Journal Article] Composite structure composed of overlapped fibre bundles, thermoplastic resin and metal plate for secondary forming process2010

Author(s)

Journal Title

MURATA Makoto 村田眞

村田真ムラタマコト

[Book] 最新機器要素技術編集共著 : 最新機器要素技術第3章 3.7円管の加工(チューブフォーミング)2008