USUKI Hiroshi 臼杵年

Researcher Number	10176670
Other IDs
External Links
Affiliation *help	2016 – 2017 : 島根大学, 総合理工学研究科, 教授 2017 : 東京大学, 生産技術研究所, 教授 2012 – 2015 : 島根大学, 総合理工学研究科(研究院), 教授 2011 : 島根大学, 総合理工学部, 教授 2008 : 島根大, 総合理工学部, 教授 … More
Review Section/Research Field	Principal Investigator Production engineering/Processing studies Except Principal Investigator 機械工作 / 機械工作・生産工学
Keywords	Principal Investigator コーティング / 酸化物 / 切削加工 / チタン合金 / コーティング工具 / 摩耗抑制 / 切削工具 / 切削 / 皮膜損傷 / Belag生成 … More Except Principal Investigator セラミック工具 / 切削加工 / 工具摩耗 / アルミナ / 超耐熱合金 / すくい面摩耗 / コーティング / Automatical Measurement / ニック / エキスパ-トシステム / ステップフィード / 超硬工具 / Ni-based super alloy / 超硬ドリル / ウィスカ / Tool wear / 最適切削工具 / 仮焼材 / Cutting / 工具損傷 / 最適仮焼温度 / 切屑排出性 / 被削性 / Tool Wear / エキスパートシステム / 遠心成形 / ceramic tool / サ-メット工具 / alumina / 曲げ強度 / デ-タベ-ス / β型チタン合金 / 高能率切削加工 / 溶着 / Expert System / TiC whisker Alumina / 穴加工 / ニッケル基超耐熱合金 / インコネル718 / 自動計測 / ファインセラミックス / TiCウィスカ Less

グラフェンおよび単結晶SiCの活用を含むチタン合金の高性能加工法の基礎研究Principal InvestigatorOngoing
- Principal Investigator
  
  臼杵年
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Shimane University
Basic Study on Coated Tools for Machining Metallic Aerospace Materials and Adhesion Reduction MachiningPrincipal Investigator
- Principal Investigator
  
  USUKI HIROSHI
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Shimane University
Clarification of adhesion mechanism of oxide protective film (Belag) and development of active utilization methodPrincipal Investigator
- Principal Investigator
  
  USUKI Hiroshi
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Shimane University
Study on Environmental Friendly Machining by Reducing the Adhesion with a Lubrication of OxidePrincipal Investigator
- Principal Investigator
  
  USUKI Hiroshi
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Shimane University
高強度チタン合金の小径穴加工の研究
- Principal Investigator
  
  NARUTAKI norihiko
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Hiroshima University
超高強度アルミナセラミック工具の開発
- Principal Investigator
  
  YAMANE Yasuo
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Hiroshima University
Development of whisker reinforced alumina ceramic tool for high speed machining of Ni-based super alloy
- Principal Investigator
  
  YAMANE Yasuo
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  HIROSHIMA UNIVERSITY
Study on Expert System for Analysis of Cutting Experiment Data
- Principal Investigator
  
  NARUTAKI norihiko, 鳴滝則彦
- Project Period (FY)
  1990 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  HIROSHIMA UNIVERSITY
超耐熱合金の高能率加工
- Principal Investigator
  
  鳴瀧則彦, 鳴滝則彦
- Project Period (FY)
  1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Hiroshima University
ファインセラミックスの高能率切削加工に関する研究
- Principal Investigator
  
  鳴瀧則彦, 鳴滝則彦
- Project Period (FY)
  1987
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Hiroshima University

All 2017 2016 2015 2014 2012 2009 2008 2007 Other

All Journal Article Presentation

[Journal Article] Wear Mechanism of PVD-Coated Cutting Tools During Continuous Turning of Ti-6Al-4V Alloy2017
- Author(s)
  Shuho Koseki, Kenichi Inoue, Katsuhiko Sekiya, Sgigekazu Morito, Takuya Ohba and Hiroshi Usuki
- Journal Title
  
  Precision Engineering
  
  Volume : 47 Pages : 434-444
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26420049
[Journal Article] Alloy 718旋削加工時のPVDコーテッド工具の逃げ面摩耗2016
- Author(s)
  小関秀峰，井上謙一，臼杵　年
- Journal Title
  
  精密工学会誌
  
  Volume : 82, 5 Pages : 460-466
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26420049
[Journal Article] Damage of physical vapor deposition coatings of cutting tools during alloy 718 turning2016
- Author(s)
  S. Koseki, K. Inoue, H. Usuki
- Journal Title
  
  Precision Engineering
  
  Volume : 44 Pages : 41-54
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26420049
[Journal Article] Comparison of TiN-coated tools using CVD and PVD processes during continuous cutting of Ni-based superalloys2015
- Author(s)
  S. Koseki, K. Inoue, S. Morito, T. Ohba, H. Usuki
- Journal Title
  
  Surface & Coatings Technology
  
  Volume : 283, 15 Pages : 353-363
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26420049
[Journal Article] Machining of Difficult-to-cut Material with a Lubricant Coated Tool2009
- Author(s)
  Masakazu Isaka, Hiroshi Usuki, Satoshi Sakamoto, Kazuyuki Kubota
- Journal Title
  
  Progress of Machining Technology Key Engineering Materials Vol. 407-408
  
  Pages : 53-56
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560117
[Journal Article] Machining of Difficult-to-cut Material with a Lubricant Coated Tool, Progress of Machining Technology2009
- Author(s)
  Masakazu Isaka, Hiroshi Usuki, Satoshi Sakamoto and Kazuyuki Kubota
- Journal Title
  
  Key Engineering Materials Vol.407-408
  
  Pages : 53-56
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560117
[Presentation] Behaviour of MnS on Belag Formation and Observation on Carbide Tool2014
- Author(s)
  Teruyuki Matsui, Hiroshi Usuki, Masahiro Yoshinobu, Shogo Nakashima, Kana Morishita, Kenichi Inoue, Takashi Kano, Makoto Haritani, Masahiro Hagino, Yasuo Yamane
- Organizer
  International Conference on Machining, Materials and Mechanical Technology (JSPE)
- Place of Presentation
  NTUH International Convention Center(発表予定およびKey Engineering Materials誌へ投稿予定)
- Data Source
  KAKENHI-PROJECT-23560124
[Presentation] Behaviour of MnS on Belag Formation and Observation on Carbide Tool2014
- Author(s)
  Teruyuki Matsui, Hiroshi Usuki, Masahiro Yoshinobu, Shogo Nakashima, Kana Morishita, Kenichi Inoue, Takashi Kano, Makoto Haritani, Masahiro Hagino, Yasuo Yamane
- Organizer
  1st International Conference on Machining, Materials and Mechanical Technology
- Place of Presentation
  NTUH International Convention Center(中華民国（台湾））
- Data Source
  KAKENHI-PROJECT-23560124
[Presentation] Observation of Belag Formation on Coated Tools by TEM2012
- Author(s)
  Ryoga SHIOTSU, Hiroshi USUKI, Syogo NAKASHIMA, Kazuyuki KUBOTA, Masakazu ISAKA, Takashi KANO, Makoto HARITANI, Yasuo YAMANE
- Organizer
  10^<th> Int. Conf. on Progress of Machining Technology(JSPE)
- Place of Presentation
  Tsubame-Sanjo Regional Industries Promotional Center
- Year and Date
  2012-09-25
- Data Source
  KAKENHI-PROJECT-23560124
[Presentation] Formation of Belag on Coated Tool and Observation of Belag formation area by TEM2012
- Author(s)
  Ryoga SHIOTSU, Hiroshi USUKI, Syogo NAKASHIMA,Kazuyuki KUBOTA, Masakazu ISAKA, Takashi KANO, Makoto HARITANI, Yasuo YAMANE
- Organizer
  10th Int. Conf. on Progress of Machining Technology
- Place of Presentation
  燕三条地場産業センター(新潟県）
- Data Source
  KAKENHI-PROJECT-23560124
[Presentation] コーテッド工具におけるBelag の生成と工具摩耗2009
- Author(s)
  長井則孝,臼杵年,多尾田有字,坂本智,中島省吾,久保田和幸,伊坂正和,狩野隆,山根八洲男
- Organizer
  精密工学会2009年度春季大会
- Place of Presentation
  中央大学
- Year and Date
  2009-03-11
- Data Source
  KAKENHI-PROJECT-19560117
[Presentation] 潤滑性コーティングエ具による難削材料の加工2008
- Author(s)
  臼杵年
- Organizer
  ABTEC2008 (砥粒加工学会)
- Place of Presentation
  滋賀県立大学
- Year and Date
  2008-09-03
- Data Source
  KAKENHI-PROJECT-19560117
[Presentation] 酸化物系保護膜(Belag)の生成と工具摩耗に関する研究(第1報)-生成界面のTEM観察-2008
- Author(s)
  臼杵年
- Organizer
  精密工学会中国四国支部愛媛地方学術講演会
- Place of Presentation
  愛媛大学
- Year and Date
  2008-11-15
- Data Source
  KAKENHI-PROJECT-19560117
[Presentation] 潤滑性コーティング工具による難削材料の加工2008
- Author(s)
  臼杵年,島本陽介,坂本智,長見佳成 ,久保田和幸
- Organizer
  ABTEC2008(砥粒加工学会)
- Place of Presentation
  滋賀県立大学
- Year and Date
  2008-09-03
- Data Source
  KAKENHI-PROJECT-19560117
[Presentation] 酸化物系保護膜(Belag)の生成と工具摩耗に関する研究(第1報)-生成界面のTEM観察-2008
- Author(s)
  長井則孝,臼杵年,多尾田有字,坂本智,久保田和幸,伊坂正和,狩野隆,山根八洲男
- Organizer
  精密工学会中国四国支部愛媛地方学術講演会
- Place of Presentation
  愛媛大学
- Year and Date
  2008-11-15
- Data Source
  KAKENHI-PROJECT-19560117
[Presentation] 潤滑性コーティング工具の切削性能(第1報)-B濃度が工具摩耗に及ぼす影響-2007
- Author(s)
  長見佳成,臼杵年,坂本智,久保田和幸
- Organizer
  精密工学会中国四国支部呉地方学術講演会
- Place of Presentation
  ポートピア呉
- Year and Date
  2007-11-16
- Data Source
  KAKENHI-PROJECT-19560117
[Presentation] 凝着現象に及ぼすコーティング結晶方位とミネラル水ミストの影響
- Author(s)
  湯浅昌章，臼杵　年，山根貴瑛，前田明良，小関秀峰，井上謙一
- Organizer
  精密工学会
- Place of Presentation
  鳥取大学
- Year and Date
  2014-09-16 – 2014-09-18
- Data Source
  KAKENHI-PROJECT-26420049
[Presentation] Ti合金の断続切削時におけるPVD皮膜の損傷要因
- Author(s)
  小関秀峰，井上謙一，緒方　真，上原一剛，臼杵　年，鹽津陵雅
- Organizer
  精密工学会
- Place of Presentation
  東洋大学
- Year and Date
  2015-03-17 – 2015-03-19
- Data Source
  KAKENHI-PROJECT-26420049
[Presentation] Damaging phenomena of PVD coated cutting tools for interrupted cuttring of Ni-based superalloys
- Author(s)
  Shuho Koseki, Kenichi Inoue, Kazutake Uehara, Hiroshi Usuki, et all
- Organizer
  International Conference of Machining, Materials and Mechanical Technology
- Place of Presentation
  台北、NTUH International Convention Center
- Year and Date
  2014-08-31 – 2014-09-04
- Data Source
  KAKENHI-PROJECT-26420049

1. NARUTAKI norihiko (10026081)

# of Collaborated Projects : 6results

# of Collaborated Products : 0results
2. YAMANE Yasuo (70140564)

# of Collaborated Projects : 4results

# of Collaborated Products : 0results
3. 鳴滝則彦

# of Collaborated Projects : 3results

# of Collaborated Products : 0results
4. 田島俊造 (40136130)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
5. 黒木英憲 (80037853)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results

USUKI Hiroshi 臼杵 年

Research Projects

Research Products

Co-Researchers

グラフェンおよび単結晶SiCの活用を含むチタン合金の高性能加工法の基礎研究Principal InvestigatorOngoing

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Basic Study on Coated Tools for Machining Metallic Aerospace Materials and Adhesion Reduction MachiningPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Clarification of adhesion mechanism of oxide protective film (Belag) and development of active utilization methodPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Environmental Friendly Machining by Reducing the Adhesion with a Lubrication of OxidePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

高強度チタン合金の小径穴加工の研究

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

超高強度アルミナセラミック工具の開発

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of whisker reinforced alumina ceramic tool for high speed machining of Ni-based super alloy

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Expert System for Analysis of Cutting Experiment Data

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

超耐熱合金の高能率加工

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

ファインセラミックスの高能率切削加工に関する研究

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Wear Mechanism of PVD-Coated Cutting Tools During Continuous Turning of Ti-6Al-4V Alloy2017

Author(s)

Journal Title

Data Source

[Journal Article] Alloy 718旋削加工時のPVDコーテッド工具の逃げ面摩耗2016

Author(s)

Journal Title

Data Source

[Journal Article] Damage of physical vapor deposition coatings of cutting tools during alloy 718 turning2016

Author(s)

Journal Title

Data Source

[Journal Article] Comparison of TiN-coated tools using CVD and PVD processes during continuous cutting of Ni-based superalloys2015

Author(s)

Journal Title

Data Source

USUKI Hiroshi 臼杵年