Yamada Takazou 山田高三

… Alternative Names

YAMADA Takazo 山田高三

Less

Researcher Number	10349962
Other IDs
Affiliation (Current)	2026: 日本大学, 理工学部, 教授
Affiliation (based on the past Project Information) *help	2013 – 2018: 日本大学, 理工学部, 准教授
Review Section/Research Field	Principal Investigator Production engineering/Processing studies
Keywords	Principal Investigator 研削加工 / 砥石 / 研削 / 計測工学 / 共焦点顕微鏡 / 機械工作・生産工学 / 知能機械 / 点合焦式 / 砥粒 / レーザ … More / 表面粗さ / 研削時間 / スパークアウト / 比研削抵抗 / 研削抵抗 Less

Research Projects
(2 results)
Research Products
(28 results)

Development of prediction function of ground surface roughness for intelligent grinding machinesPrincipal Investigator
- Principal Investigator
  
  YAMADA Takazo
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nihon University
Development of machining accuracy estimation system in order to improve grinding efficiencyPrincipal Investigator
- Principal Investigator
  
  YAMADA Takazo
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nihon University

All 2018 2017 2016 2015 2014 2013 Other

All Journal Article Presentation

[Journal Article] Measuring method of distribution of abrasive grain cutting edge by means of AE sensors2015
- Author(s)
  Takazo YAMADA, Hwa-Soo LEE, Kohichi MIURA
- Journal Title
  
  Advanced Materials Research
  
  Volume: 806 Pages: 601-605
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25420068
[Journal Article] Estimation of grinding cycle time taking into account specific grinding force2014
- Author(s)
  Takazo YAMADA, Hwa-Soo LEE and Kohichi MIURA
- Journal Title
  
  Advanced Materials Research
  
  Volume: 1017 Pages: 72-77
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-25420068
[Journal Article] Effect of Contact Stiffness of Grinding Wheel on Ground surface Roughness and Residual Stock Removal of Workpiece2013
- Author(s)
  Takazo YAMADA, Hwa-Soo LEE and Kohichi MIURA
- Journal Title
  
  Advanced Material Research
  
  Volume: 797 Pages: 522-527
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25420068
[Presentation] レーザを用いた測定方式の違いによる砥石表面形状の測定2018
- Author(s)
  今泉雄斗，中田友満，内田元，山田高三，李和樹, 三浦浩一
- Organizer
  2018年度砥粒加工学会卒業研究発表会
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] ドレッシング前後における砥石表面状態の違い2018
- Author(s)
  田中智寛，水井優希，内田元，山田高三，李和樹, 三浦浩一
- Organizer
  砥粒加工学会卒業研究発表会
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] レーザ変位計を用いた砥石熱膨張量の測定2018
- Author(s)
  下田竣也，岸野良亮，内田元，山田高三，李和樹，三浦浩一
- Organizer
  2018年度精密工学会春季大会学生会員卒業研究発表講演会
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] レーザ変位計を用いた研削時の砥石熱膨張量の測定2018
- Author(s)
  田中允，山田高三，高橋宏美，向井良平，内田元，李和樹，三浦浩一
- Organizer
  砥粒加工学会学術講演会（ABTEC2018）
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] 円筒研削時における砥石熱膨張量の測定2018
- Author(s)
  田中允，成澤龍，内田元，山田高三，李和樹，三浦浩一
- Organizer
  砥粒加工学会卒業研究発表会
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] Measuring of thermal expansion of grinding wheel by means of laser displacement sensor2018
- Author(s)
  Takazo Yamada, Gen Uchida, Hwa-Soo Lee, Kohichi Miura
- Organizer
  The 21st International Symposium on Advances in Abrasive Technology (ISAAT2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] Measuring of Grinding Wheel Surface Shape by Means of Laser Probe and Evaluation of Cutting Edge Density2018
- Author(s)
  Gen Uchida, Takazo Yamada, Kohichi Miura, Hwa-Soo Lee
- Organizer
  The 21st International Symposium on Advances in Abrasive Technology (ISAAT2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] 平面研削加工時における工作物切増し要因の検討2018
- Author(s)
  中島美穂，髙橋知樹，内田元，山田高三，李和樹，三浦浩一
- Organizer
  砥粒加工学会卒業研究発表会
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] 画像処理による砥石表面状態の観察と評価2018
- Author(s)
  平野育海，内田　元，李　和樹，山田高三，三浦浩一
- Organizer
  精密工学会学術講演会秋季大会
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] 点合焦式輪郭曲線方を応用した砥石表面形状測定装置の試作2017
- Author(s)
  鳥屋誠覇，上紙透，山田高三，李和樹，三浦浩一
- Organizer
  砥粒加工学会卒業研究発表会
- Place of Presentation
  ホテルプラザ勝川（愛知県春日井市）
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] 点合焦輪郭曲線法を応用した砥石表面形状の測定2017
- Author(s)
  内田元，山田高三，三浦浩一，李和樹
- Organizer
  2017年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] Development of measuring device of grinding wheel surface shape by means of laser probe method2017
- Author(s)
  Gen Uchida, Takazo Yamada, Koichi Miura and Hwa-Soo Lee
- Organizer
  6th Pacific Asia Conference of Mechanical Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] Measuring of Grinding Wheel Surface Shape by Means of Laser Probe Method2017
- Author(s)
  Gen UCHIDA, Takazo YAMADA, Kohichi MIURA and Hwa-Soo LEE
- Organizer
  The 20th International Symposium on Advances in Abrasive Technology (ISAAT2017)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] 研削量が砥粒支持剛性と接触剛性に及ぼす影響2017
- Author(s)
  田中佑弥，佐久間大貴，山田高三，李和樹，三浦浩一
- Organizer
  砥粒加工学会卒業研究発表会
- Place of Presentation
  ホテルプラザ勝川（愛知県春日井市）
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] Calculation of Static Contact Stiffness of Grinding Wheel by Means of Support Stiffness of Single Abrasive Grain2016
- Author(s)
  Takazo YAMADA, Hwa-Soo LEE and Kohichi MIURA
- Organizer
  The 19th International Symposium on Advances in Abrasive Technology
- Place of Presentation
  Stockholm（Sweden）
- Year and Date
  2016-10-02
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] 点合焦式輪郭曲線方式を用いた砥石表面形状の測定2016
- Author(s)
  中野寛士，下川航，山田高三，李和樹，三浦浩一
- Organizer
  砥粒加工学会卒業論文発表会
- Place of Presentation
  大田区産業プラザ（東京都大田区）
- Year and Date
  2016-03-04
- Data Source
  KAKENHI-PROJECT-25420068
[Presentation] 微細軸加工における加工精度と軸剛性の関係2016
- Author(s)
  小林聖和，石原雅也，李和樹，三浦浩一，山田高三
- Organizer
  砥粒加工学会卒業論文発表会
- Place of Presentation
  大田区産業プラザ（東京都大田区）
- Year and Date
  2016-03-04
- Data Source
  KAKENHI-PROJECT-25420068
[Presentation] 砥粒支持剛性を用いた砥石の接触剛性の算出2016
- Author(s)
  山田高三，李和樹
- Organizer
  砥粒加工学会学術講演会
- Place of Presentation
  兵庫県立大学（兵庫県・姫路市）
- Year and Date
  2016-08-31
- Data Source
  KAKENHI-PROJECT-16K06024
[Presentation] 微細電極製造装置のNC化による旋削ならびに放電加工性能の向上2016
- Author(s)
  桝田優城，中村健志，李和樹，三浦浩一，山田高三
- Organizer
  砥粒加工学会卒業論文発表会
- Place of Presentation
  大田区産業プラザ（東京都大田区）
- Year and Date
  2016-03-04
- Data Source
  KAKENHI-PROJECT-25420068
[Presentation] 砥粒支持剛性を用いた砥石静止時の接触剛性の算出2016
- Author(s)
  野村和希，山田高三，李和樹，三浦浩一，飯田祐也
- Organizer
  砥粒加工学会卒業論文発表会
- Place of Presentation
  大田区産業プラザ（東京都大田区）
- Year and Date
  2016-03-04
- Data Source
  KAKENHI-PROJECT-25420068
[Presentation] Effect of Contact Stiffness of Grinding Wheel on Ground surface Roughness and Residual Stock Removal of Workpiece2013
- Author(s)
  Takazo YAMADA, Hwa-Soo LEE and Kohichi MIURA
- Organizer
  The 16th International Symposium on Advances in Abrasive Technology
- Place of Presentation
  Hangzhou, China
- Data Source
  KAKENHI-PROJECT-25420068
[Presentation] Estimation of grinding cycle time taking into account specific grinding force
- Author(s)
  Takazo YAMADA, Hwa-Soo LEE and Kohichi MIURA
- Organizer
  The 17th International Symposium on Advances in Abrasive Technology
- Place of Presentation
  Hawaii, America
- Year and Date
  2014-09-22 – 2014-09-25
- Data Source
  KAKENHI-PROJECT-25420068
[Presentation] 砥石の接触剛性によるびびり振動の抑制法
- Author(s)
  田中慶弘，山田高三，李和樹，三浦浩一
- Organizer
  砥粒加工学会学術講演会
- Place of Presentation
  日本大学理工学部（東京都千代田区）
- Data Source
  KAKENHI-PROJECT-25420068
[Presentation] 比研削抵抗を利用した研削痕深さの算出と研削時間の予測
- Author(s)
  堀川翔太，保土塚崇史，鈴木隆善，山田高三，三浦浩一，李和樹
- Organizer
  砥粒加工学会卒業研究発表会
- Place of Presentation
  大田区産業プラザ（東京都大田区）
- Data Source
  KAKENHI-PROJECT-25420068
[Presentation] 比研削抵抗を考慮したスパークアウト研削時間の予測
- Author(s)
  鈴木隆善，山田高三，李和樹，三浦浩一
- Organizer
  砥粒加工学会学術講演会
- Place of Presentation
  日本大学理工学部（東京都千代田区）
- Data Source
  KAKENHI-PROJECT-25420068

Yamada Takazou 山田 高三

YAMADA Takazo 山田 高三

Research Projects

Research Products

Development of prediction function of ground surface roughness for intelligent grinding machinesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of machining accuracy estimation system in order to improve grinding efficiencyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Measuring method of distribution of abrasive grain cutting edge by means of AE sensors2015

Author(s)

Journal Title

Data Source

[Journal Article] Estimation of grinding cycle time taking into account specific grinding force2014

Author(s)

Journal Title

Data Source

[Journal Article] Effect of Contact Stiffness of Grinding Wheel on Ground surface Roughness and Residual Stock Removal of Workpiece2013

Author(s)

Journal Title

Data Source

[Presentation] レーザを用いた測定方式の違いによる砥石表面形状の測定2018

Author(s)

Organizer

Data Source

[Presentation] ドレッシング前後における砥石表面状態の違い2018

Author(s)

Organizer

Data Source

[Presentation] レーザ変位計を用いた砥石熱膨張量の測定2018

Author(s)

Organizer

Data Source

[Presentation] レーザ変位計を用いた研削時の砥石熱膨張量の測定2018

Author(s)

Organizer

Data Source

[Presentation] 円筒研削時における砥石熱膨張量の測定2018

Author(s)

Organizer

Data Source

[Presentation] Measuring of thermal expansion of grinding wheel by means of laser displacement sensor2018

Author(s)

Organizer

Data Source

[Presentation] Measuring of Grinding Wheel Surface Shape by Means of Laser Probe and Evaluation of Cutting Edge Density2018

Author(s)

Organizer

Data Source

[Presentation] 平面研削加工時における工作物切増し要因の検討2018

Author(s)

Organizer

Data Source

[Presentation] 画像処理による砥石表面状態の観察と評価2018

Author(s)

Organizer

Data Source

[Presentation] 点合焦式輪郭曲線方を応用した砥石表面形状測定装置の試作2017

Author(s)

Organizer

Place of Presentation

Data Source

[Presentation] 点合焦輪郭曲線法を応用した砥石表面形状の測定2017

Author(s)

Organizer

Data Source

[Presentation] Development of measuring device of grinding wheel surface shape by means of laser probe method2017

Author(s)

Organizer

Data Source

[Presentation] Measuring of Grinding Wheel Surface Shape by Means of Laser Probe Method2017

Author(s)

Organizer

Yamada Takazou 山田高三

YAMADA Takazo 山田高三