TANIGUCHI Yukinori 谷口幸典

… Alternative Names

Taniguchi Yukinori 谷口幸典

Less

Researcher Number	10413816
Other IDs	https://orcid.org/0009-0004-6254-8378
Affiliation (Current)	2026: 奈良工業高等専門学校, 機械工学科, 教授
Affiliation (based on the past Project Information) *help	2023 – 2024: 奈良工業高等専門学校, 機械工学科, 教授 2020 – 2022: 奈良工業高等専門学校, 機械工学科, 准教授 2016 – 2018: 奈良工業高等専門学校, 機械工学科, 准教授 2012 – 2015: 奈良工業高等専門学校, その他部局等, 准教授
Review Section/Research Field	Principal Investigator Basic Section 18020:Manufacturing and production engineering-related / Production engineering/Processing studies
Keywords	Principal Investigator 粉末成形 / 有限要素法解析 / 個別要素法 / 一面せん断試験 / 粉末冶金 / Druker-Prager CAPモデル / 摩擦係数 / Drucker-Prager　CAPモデル / フェライト粉末 / 鉄粉末 … More / Drucker-Prager CAPモデル / 有限要素法 / Powder Metallurgy / Finite Element Method / Drucker-Prager CAP model / Powder Compaction / マイクロフォーミング / 絞り加工 / 数値解析 / QOL / 磁気温熱治療法 / ダイレイタンシー / せん断強度 / 破壊 / 圧密挙動 / 破壊包絡線 Less

圧粉成形における非線形壁面摩擦挙動のモデル化とその数値解析への実装Principal Investigator
- Principal Investigator
  
  谷口幸典
- Project Period (FY)
  2023 – 2025
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Nara National College of Technology
Testing Method to Identify Yield Parameters on Metal Powder Compaction for FEM Analysis of Compaction Failure OccurrencePrincipal Investigator
- Principal Investigator
  
  Taniguchi Yukinori
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Nara National College of Technology
Development of processing technique for micro capsule as magnetic hypothermia implantPrincipal Investigator
- Principal Investigator
  
  Taniguchi Yukinori
- Project Period (FY)
  2015 – 2018
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nara National College of Technology
Development of Single Shear Test for Metal Powder CompactPrincipal Investigator
- Principal Investigator
  
  TANIGUCHI Yukinori
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nara National College of Technology

All 2025 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 Other

All Journal Article Presentation Book

[Book] セラミックス・金属の焼成、焼結技術とプロセス開発2024
- Author(s)
  芦塚康佑、岩岡拓、谷口幸典他
- Total Pages
  525
- Publisher
  技術情報協会
- ISBN
  9784867980095
- Data Source
  KAKENHI-PROJECT-23K03614
[Journal Article] Identification of Yield Surface for FEM Analysis of Powder Die Compaction2025
- Author(s)
  Taniguchi Yukinori
- Journal Title
  
  Journal of the Japan Society of Powder and Powder Metallurgy
  
  Volume: 72 Issue: Supplement Pages: S1-S8
- DOI
  10.2497/jjspm.14A-T2-02
- ISSN
  0532-8799, 1880-9014
- Year and Date
  2025-03-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23K03614
[Journal Article] 多段形状圧粉成形時における工具スプリングバックに関するFEM解析2024
- Author(s)
  谷口幸典
- Journal Title
  
  スマートプロセス学会誌
  
  Volume: 13 Pages: 115-119
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23K03614
[Journal Article] Influence of punch spring back in powder die compaction by FEM analysis2024
- Author(s)
  Hayashi Mayu、Kodama Kenji、Taniguchi Yukinori
- Journal Title
  
  AIP Conference Proceedings
  
  Volume: 3086 Pages: 040004-040004
- DOI
  10.1063/5.0205315
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23K03614
[Journal Article] Finite Element Analysis of Powder Die Compaction Process2022
- Author(s)
  谷口幸典
- Journal Title
  
  PLASTOS
  
  Volume: 5 Issue: 53 Pages: 263-269
- DOI
  10.32277/plastos.5.53_263
- ISSN
  2433-8826
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K04204
[Journal Article] Yield Parameters for Iron Powder Compaction on Different Particle Size2020
- Author(s)
  Ogawa R、Fujii J、Taniguchi Y
- Journal Title
  
  IOP Conference Series: Materials Science and Engineering
  
  Volume: 886 Issue: 1 Pages: 012060-012060
- DOI
  10.1088/1757-899x/886/1/012060
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K04204
[Journal Article] Estimation of Yield Surface on Iron Powder Compaction for Finite Element Analysis using Drucker-Prager Cap Model2019
- Author(s)
  R Ogawa, T Yoshimura, N Yagi, K Mizuta and Y Taniguchi
- Journal Title
  
  IOP Conf. Series: Materials Science and Engineering
  
  Volume: 501 Pages: 1-8
- DOI
  10.1088/1757-899x/501/1/012021
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15K13851
[Journal Article] 粉末冶金法によるものづくり体験講座の実施2013
- Author(s)
  谷口幸典
- Journal Title
  
  奈良工業高等専門学校研究紀要第48号（2013）
  
  Volume: 48 Pages: 1-6
- Data Source
  KAKENHI-PROJECT-24760111
[Presentation] 金型圧粉成形における壁面摩擦試験法2024
- Author(s)
  谷口幸典
- Organizer
  塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-23K03614
[Presentation] DPCモデルを用いたPTFE粉末の圧粉成形解析2024
- Author(s)
  谷口幸典
- Organizer
  塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-23K03614
[Presentation] 粉末－型壁面間における摩擦挙動の評価手法について2023
- Author(s)
  谷口　幸典
- Organizer
  JSPM 粉体粉末冶金協会2023年度春季大会（第131回講演大会）
- Data Source
  KAKENHI-PROJECT-23K03614
[Presentation] Single shear test for FEM analysis of powder die compaction2023
- Author(s)
  Yukinori Taniguchi
- Organizer
  JSPM International Conference on Powder and Powder Metallurgy, 2023, Kyoto (JSPMIC2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K03614
[Presentation] 圧粉体のせん断破壊挙動に関する研究2023
- Author(s)
  谷口　幸典
- Organizer
  JSPM 粉体粉末冶金協会2023年度秋季大会（第132回講演大会）
- Invited
- Data Source
  KAKENHI-PROJECT-23K03614
[Presentation] PTFE 粉末の圧粉成形解析2023
- Author(s)
  谷口　幸典
- Organizer
  JSPM 粉体粉末冶金協会2023年度秋季大会（第132回講演大会）
- Data Source
  KAKENHI-PROJECT-23K03614
[Presentation] 金型圧粉成形-抜出し行程のFEM解析第2報除荷行程における工具スプリングバックの影響2022
- Author(s)
  谷口幸典，林真由
- Organizer
  塑性加工春季講演会講演論文集
- Data Source
  KAKENHI-PROJECT-20K04204
[Presentation] 種々の粉末降伏特性における圧粉成形のFEM解析2022
- Author(s)
  谷口幸典，林真由
- Organizer
  粉体粉末冶金協会講演大会
- Data Source
  KAKENHI-PROJECT-20K04204
[Presentation] Influence of punch spring back in powder die compaction by FEM analysis2022
- Author(s)
  M Hayashi, K Kodama, and Y Taniguchi
- Organizer
  The 12th TSME International Conference on Mechanical Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K04204
[Presentation] 金型圧粉成形－抜出し行程の FEM 解析2021
- Author(s)
  谷口幸典, 林真由
- Organizer
  第72回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-20K04204
[Presentation] Prediction of shear crack occurrence on iron powder die compaction by FEM analysis2021
- Author(s)
  Mayu Hayashi and Yukinori Taniguchi
- Organizer
  International Conference on Design and Concurrent Engineering 2021 & Manufacturing Systems Conference 2021
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K04204
[Presentation] フェライト粉末の力学的圧粉特性について2021
- Author(s)
  谷口幸典, 林真由
- Organizer
  粉体粉末冶金協会2021年度秋季大会（第128回講演大会）
- Data Source
  KAKENHI-PROJECT-20K04204
[Presentation] 金属粉末圧粉体の弾性変形挙動に関する研究2020
- Author(s)
  藤井惇平、谷口幸典
- Organizer
  第７１回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-20K04204
[Presentation] 鉄圧粉体の破壊挙動とそのDEM解析2018
- Author(s)
  水田航平, 谷口幸典
- Organizer
  粉体粉末冶金協会講演大会
- Data Source
  KAKENHI-PROJECT-15K13851
[Presentation] 鉄粉末圧粉体のせん断破壊特性2018
- Author(s)
  吉村太智, 水田航平, 谷口幸典
- Organizer
  粉体粉末冶金協会講演大会
- Data Source
  KAKENHI-PROJECT-15K13851
[Presentation] Drucker‐Prager Capモデルを用いた圧粉成形シミュレーション2018
- Author(s)
  水田航平, 吉村太智, 小川椋太郎, 谷口幸典
- Organizer
  塑性加工連合講演会講演論文集
- Data Source
  KAKENHI-PROJECT-15K13851
[Presentation] Simulation of Cutting Behavior in Green Powder Compact by using Distinct Element Method2018
- Author(s)
  谷口　幸典，八木　直輝，大前　雄也，水田　航平
- Organizer
  2018 World Congress on Powder Metallurgy, Beijing
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K13851
[Presentation] Mechanism of Powder Assisted Deep Drawing of Ti thin sheet to fabricate small capsule implant2017
- Author(s)
  K.Nishitani, K.Kodama, Y.Miki, M.Asano, M.Ozaki, H.Shimada, R.Fukuda and Y.Taniguchi
- Organizer
  The 4th International Conference on Powder Metallurgy in Asia
- Place of Presentation
  Sheraton Hsinchu Hotel, Hsinchu, TAIWAN
- Year and Date
  2017-04-09
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K13851
[Presentation] Mechanism of Powder assisted Deep Drawing of Ti thin sheet to fabricate small capsule implant2017
- Author(s)
  Keigo Nishitani, Kohei Mizuta, Hirotsugu Shimada, Ryuichi Fukuda, Mitsunori Ozaki, Kenji Kodama and Yukinori Taniguchi
- Organizer
  The 4th International Conference on Powder Metallurgy in Asia
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K13851
[Presentation] 定圧一面せん断試験による鉄粉末のせん断破壊挙動の実測―第2報粉末粒子径の影響―2016
- Author(s)
  谷口幸典, 潮田昂士, 西谷啓吾
- Organizer
  平成28年塑性加工春季講演会講演論文集pp.175-176．
- Place of Presentation
  京都工芸繊維大学松ヶ崎キャンパス
- Year and Date
  2016-05-20
- Data Source
  KAKENHI-PROJECT-15K13851
[Presentation] 鉄粉末を媒介したTi箔の絞り加工による微細粉末カプセルの作成―第２報　絞り深さに及ぼす加工条件の評価―2016
- Author(s)
  西谷啓吾，児玉謙司, 尾崎充紀, 島田大嗣, 三木靖浩, 浅野誠, 谷口幸典
- Organizer
  平成28年度塑性加工春季講演会
- Place of Presentation
  京都工芸繊維大学松ヶ崎キャンパス
- Year and Date
  2016-05-20
- Data Source
  KAKENHI-PROJECT-15K13851
[Presentation] Mechanism on Micro Deep Drawing Process of Ti through the Medium of Iron Powder2016
- Author(s)
  Keigo Nishitani, Kohei Mizuta, Hirotsugu Shimada, Ryuichi Fukuda, Mitsunori Ozaki, Kenji Kodama and Yukinori Taniguchi
- Organizer
  18th International Conference on Mechanical Engineering Design and Analysis
- Place of Presentation
  Hyatt Regency， Osaka
- Year and Date
  2016-10-10
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K13851
[Presentation] 鉄粉末を内包したチタンカプセルインプラントの作製2015
- Author(s)
  谷口幸典, 潮田昂士, 児玉謙司, 尾崎充紀, 西谷啓吾, 島田大嗣
- Organizer
  第66回塑性加工連合講演会
- Place of Presentation
  いわき市文化センター
- Year and Date
  2015-10-29
- Data Source
  KAKENHI-PROJECT-15K13851
[Presentation] Micro Deep Drawing Process of Ti through the Medium of Iron Powder for Magnetic Hyperthermia Cancer Care2015
- Author(s)
  Yukinori Taniguchi, Keigo Nishitani and Kenji Kodama
- Organizer
  The 6th TSME International Conference on Mechanical Engineering
- Place of Presentation
  Regent Cha-Am, Phetchaburi, Thailand
- Year and Date
  2015-12-16
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K13851
[Presentation] Capsulation Process of Fe Powder Particlesby Indent-Extrusion of a Multi Layered Blank forHyperthermia Cancer Care2014
- Author(s)
  Yukinori Taniguchi, Kenji Kodama, Tatsumi Ichise,Yasuhiro Miki, Manabu Fukugauchi, Makoto Asano, Nobuyoshi Hosoito, Hiroki Kuniyasu
- Organizer
  The 9th International Conference on MicroManufacturing (ICOMM 2014)
- Place of Presentation
  シンガポール，ナンヤン大学
- Data Source
  KAKENHI-PROJECT-24760111
[Presentation] 定圧一面せん断試験による鉄粉末のせん断破壊挙動の実測2013
- Author(s)
  谷口幸典
- Organizer
  塑性加工連合講演会講演論文集 64th
- Place of Presentation
  大阪大学
- Data Source
  KAKENHI-PROJECT-24760111
[Presentation] 多孔質な純銅素材を素材とした円形パンチ押込みによる微小ビレット成形2013
- Author(s)
  谷口幸典, 城内建人, 堤浩晃, 尾崎充紀, 島田大嗣
- Organizer
  塑性加工春季講演会講演論文集
- Place of Presentation
  大同工業大学
- Data Source
  KAKENHI-PROJECT-24760111
[Presentation] Small Billet Forming of Porous Sintered Copper Sheet2013
- Author(s)
  Yukinori Taniguchi, Hirotsugu Shimada, Mitsunori Ozaki and Kenji Kodama
- Organizer
  Proceedings of The 4th TSME International Conference on Mechanical Engineering
- Place of Presentation
  タイ王国，パタヤ，デュシタニホテル
- Data Source
  KAKENHI-PROJECT-24760111
[Presentation] 鉄粉末を媒介したTi箔の絞り加工による微細粉末カプセルの作成
- Author(s)
  谷口幸典
- Organizer
  一般社団法人日本塑性加工学会　平成26年度塑性加工春季講演会
- Place of Presentation
  つくば国際会議場
- Year and Date
  2014-06-06 – 2014-06-08
- Data Source
  KAKENHI-PROJECT-24760111
[Presentation] 粉末焼結体の圧縮試験とその数値解析の基礎的検討
- Author(s)
  谷口幸典
- Organizer
  日本塑性加工学会西日本若手技術交流会
- Place of Presentation
  今治国際ホテル
- Data Source
  KAKENHI-PROJECT-24760111
[Presentation] 簡易粉末成形－焼結法による粉末冶金法の体験教材化とワークショップの実施
- Author(s)
  谷口幸典
- Organizer
  粉体粉末冶金協会平成24年度秋季大会(第110回講演大会)
- Place of Presentation
  立命館大学びわこキャンパス
- Data Source
  KAKENHI-PROJECT-24760111
[Presentation] 金属粉末用一面せん断試験法の開発（第一報：試験機の試作）
- Author(s)
  扇田大生，谷口幸典
- Organizer
  日本機械学会　関西学生会平成25年度学生員卒業研究発表講演会
- Place of Presentation
  大阪府立大学中百舌鳥キャンパス
- Data Source
  KAKENHI-PROJECT-24760111
[Presentation] 金属粉末用一面せん断試験法の開発 (第二報：せん断挙動の考察)
- Author(s)
  三谷涼太郎，谷口幸典
- Organizer
  日本機械学会　関西学生会平成25年度学生員卒業研究発表講演会
- Place of Presentation
  大阪府立大学中百舌鳥キャンパス
- Data Source
  KAKENHI-PROJECT-24760111
[Presentation] Die Wall Lubrication Behaviour of Internal Lubricant Powders in Uniaxial Iron Powder Compaction with DLC Coated Die
- Author(s)
  Y. Taniguchi
- Organizer
  Proceedings of Powder Metallurgy World Congress(PM2012)
- Place of Presentation
  パシフィコ横浜
- Data Source
  KAKENHI-PROJECT-24760111
[Presentation] Suggestion of Simplified Powder Metallurgy Method for Engineering Education
- Author(s)
  Y. Taniguchi
- Organizer
  Proceedings of International Symposium on Advances in Technology Education(ISATE2012)
- Place of Presentation
  北九州国際会議場
- Data Source
  KAKENHI-PROJECT-24760111

1. KODAMA Kenji

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
2. KUNIYASU Hiroki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

TANIGUCHI Yukinori 谷口 幸典

Taniguchi Yukinori 谷口 幸典

Research Projects

Research Products

Co-Researchers

圧粉成形における非線形壁面摩擦挙動のモデル化とその数値解析への実装Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Testing Method to Identify Yield Parameters on Metal Powder Compaction for FEM Analysis of Compaction Failure OccurrencePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of processing technique for micro capsule as magnetic hypothermia implantPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Single Shear Test for Metal Powder CompactPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] セラミックス・金属の 焼成、焼結技術とプロセス開発2024

Author(s)

Total Pages

Publisher

ISBN

Data Source

[Journal Article] Identification of Yield Surface for FEM Analysis of Powder Die Compaction2025

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] 多段形状圧粉成形時における工具スプリングバックに関するFEM解析2024

Author(s)

Journal Title

Data Source

[Journal Article] Influence of punch spring back in powder die compaction by FEM analysis2024

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Finite Element Analysis of Powder Die Compaction Process2022

Author(s)

Journal Title

DOI

ISSN

Language

Data Source

[Journal Article] Yield Parameters for Iron Powder Compaction on Different Particle Size2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Estimation of Yield Surface on Iron Powder Compaction for Finite Element Analysis using Drucker-Prager Cap Model2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] 粉末冶金法によるものづくり体験講座の実施2013

Author(s)

Journal Title

Data Source

[Presentation] 金型圧粉成形における壁面摩擦試験法2024

Author(s)

Organizer

Data Source

[Presentation] DPCモデルを用いたPTFE粉末の圧粉成形解析2024

Author(s)

Organizer

TANIGUCHI Yukinori 谷口幸典

Taniguchi Yukinori 谷口幸典

[Book] セラミックス・金属の焼成、焼結技術とプロセス開発2024

[Presentation] 金型圧粉成形-抜出し行程のFEM解析第2報除荷行程における工具スプリングバックの影響2022