Yamada Shuho 山田周歩

Researcher Number	10845580
Affiliation (Current)	2025: 富山県立大学, 工学部, 講師
Affiliation (based on the past Project Information) *help	2022 – 2024: 富山県立大学, 工学部, 講師
Review Section/Research Field	Principal Investigator Basic Section 25010:Social systems engineering-related Except Principal Investigator Basic Section 25010:Social systems engineering-related
Keywords	Principal Investigator ライフサイクルアセスメント / 設計支援 / システム記述 / 設計支援システム / 物流 / サプライチェーン / 製品アーキテクチャ Except Principal Investigator SDGs経営 / AI数理協働 / サプライチェーン … More / 再製造 / 再生可能エネルギー / 価値成長 / アップグレード / 設計支援システム / ライフサイクルコスティング / 製品アーキテクチャ / 経年劣化 Less

Development of Weather-Driven Supply Chain GX Support System by AI and Mathematical Collaboration for Renewable Energy and Remanufacturing
- Principal Investigator
  
  山田哲男
- Project Period (FY)
  2023 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 25010:Social systems engineering-related
- Research Institution
  The University of Electro-Communications
循環可能製品のアーキテクチャ&サプライチェーン設計とマネジメント支援システムPrincipal Investigator
- Principal Investigator
  
  山田周歩
- Project Period (FY)
  2023 – 2027
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 25010:Social systems engineering-related
- Research Institution
  Toyama Prefectural University
経年劣化をプラスに変え価値を高める製品アーキテクチャ設計支援システム
- Principal Investigator
  
  井上全人
- Project Period (FY)
  2022 – 2025
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 25010:Social systems engineering-related
- Research Institution
  Meiji University

All 2024 2023 2022

All Journal Article Presentation Book

[Book] EcoDesign for Sustainable Products, Services and Social Systems I2023
- Author(s)
  Jaeho Han, Hiromasa Ijuin, Tetsuo Yamada, Shuho Yamada, Masato Inoue (Shinichi Fukushige, Hideki Kobayashi, Eiji Yamasue, Keishiro Hara (Eds.))
- Total Pages
  525
- Publisher
  Springer Singapore
- ISBN
  9789819938186
- Data Source
  KAKENHI-PROJECT-23K26329
[Journal Article] 太陽光発電における蓄電池併用時の買電・充電切換に関する事例研究2024
- Author(s)
  加藤大貴，伊集院大将，山田哲男，高野倉雅人，松井正之
- Journal Title
  
  日本設備管理学会誌
  
  Volume: 35 Pages: 114-123
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23K26329
[Journal Article] Seasonal Analysis and Capacity Planning of Solar Energy Demand-to-Supply Management: Case Study of a Logistics Distribution Center2023
- Author(s)
  Akihiko Takada, Hiromasa Ijuin, Masayuki Matsui, Tetsuo Yamada
- Journal Title
  
  Energies
  
  Volume: 17 Issue: 1 Pages: 1-23
- DOI
  10.3390/en17010191
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23K26329
[Journal Article] Utilization of Free Trade Agreements to Minimize Costs and Carbon Emissions in the Global Supply Chain for Sustainable Logistics2023
- Author(s)
  Yuki Kinoshita, Takaki Nagao, Hiromasa Ijuin, Keisuke Nagasawa, Tetsuo Yamada, Surendra M. Gupta
- Journal Title
  
  Logistics
  
  Volume: 7 Issue: 2 Pages: 21-21
- DOI
  10.3390/logistics7020032
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22KJ1363, KAKENHI-PROJECT-23K26329
[Journal Article] Appropriately Limiting Quantities of Remanufacturing Products Considering Virtual Inventory for Stabilization of Production Resources2023
- Author(s)
  Jundai Koketsu, Aya Ishigaki, Hiromasa Ijuin, Tetsuo Yamada
- Journal Title
  
  Journal of Remanufacturing
  
  Volume: 13 Issue: 3 Pages: 243-261
- DOI
  10.1007/s13243-023-00128-x
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23K26329
[Journal Article] セットベース設計手法のアップグレード製品設計への適用2022
- Author(s)
  山田周歩，井上全人
- Journal Title
  
  設計工学
  
  Volume: 57, 9 Pages: 441-446
- Data Source
  KAKENHI-PROJECT-23K22987
[Presentation] Design of Reverse Logistics for Costs and Recycling Rate Using Machine Learning2024
- Author(s)
  Hiromasa Ijuin, Jundai Koketsu, Tetsuo Yamada, Aya Ishigaki
- Organizer
  The 7th International Workshop on Production and Logistics (IWPL 2024)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] 自動車リビルト部品の利用による環境負荷削減効果の評価（ACコンプレッサ，スタータ，オルタネータの事例）2023
- Author(s)
  山田周歩, 堀内郁矢, 井上全人, 藤田光伸, 早川明宏, 森孝男
- Organizer
  日本機械学会　第33回設計工学・システム部門講演会
- Data Source
  KAKENHI-PROJECT-23K13515
[Presentation] 3次元モーションの可視化による分解作業の分析に関する一考察2023
- Author(s)
  林拓，川根龍人，杉正夫，山田哲男，軽部幸起
- Organizer
  2023年度日本設備管理学会秋季研究発表大会
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] サプライチェーンを考慮した製品アーキテクチャ設計支援（輸送手段ごとの配送能力に基づく評価モデル）2023
- Author(s)
  小松侑暉，山田周歩，井上全人
- Organizer
  日本機械学会第33回設計工学・システム部門講演会
- Data Source
  KAKENHI-PROJECT-23K22987
[Presentation] Repair Options in Terms of Product Value, Environmental Impact, and Cost for Automobile User2023
- Author(s)
  Suki Ueda, Reo Sato, Mitsunobu Fujita, Takao Mori, Shuho Yamada, Akihiro Hayakawa and Masato Inoue
- Organizer
  EcoDesign (EcoDesign 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22987
[Presentation] Assembly Elemental Work Analysis Using Worker Classification by Motion Capture and Machine Learning2023
- Author(s)
  Ryuto Kawane, Koki Karube, Masao Sugi, Tomohiro Nakada, Tetsuo Yamada
- Organizer
  第19回Webインテリジェンスとインタラクション研究会
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] Modeling of Disassembly Parts Selection for Recycling, CO2 Saving Rates and Cost using Linear Physical Programming2023
- Author(s)
  Yuki Kinoshita, Tetsuo Yamada, Hiromasa Ijuin
- Organizer
  27th International Conference on Production Research (2023 ICPR27)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] Identification of Potential Improvement Assembly Movement Using Worker Classification by Motion Capture and Machine Learning2023
- Author(s)
  Ryuto Kawane, Hiromasa Ijuin, Koki Karube, Masao Sugi, Tomohiro Nakada, Tetsuo Yamada
- Organizer
  2023 IEEE 13th International Workshop on Computational Intelligence and Applications (IWCIA 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] Motion Capture Analysis of Learning Effect for Assembly Tasks2023
- Author(s)
  Koki Karube, Ryuto Kawane, Taku Hayashi, Masao Sugi, Tetsuo Yamada
- Organizer
  The 7th Asian Conference of Management Science and Applications (ACMSA 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] Modeling of Disassembly Parts Selection for Recycling, CO2 Saving Rates and Cost using Linear Physical Programming2023
- Author(s)
  Yuki Kinoshita, Tetsuo Yamada, Hiromasa Ijuin
- Organizer
  27th International Conference on Production Research (2023 ICPR27)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22987
[Presentation] Solar Energy Analysis Using the On-Demand Cumulative Control Method: Case Study of a Logistics Distribution Center2023
- Author(s)
  Akihiko Takada, Hiromasa Ijuin, Masayuki Matsui, Tetsuo Yamada
- Organizer
  International Symposium on Scheduling 2023 (ISS2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] 温室効果ガスの回収による炭素税還付を考慮したリバースサプライチェーンネットワークのモデル化2023
- Author(s)
  竹下温人，古手川美結，伊集院大将，木下雄貴，山田哲男
- Organizer
  2023年度日本設備管理学会秋季研究発表大会
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] Comparison of Different Procurement Options and Influence on Greenhouse Gas Emissions: Case of Bochum City2023
- Author(s)
  Seigo Takahashi, Yuki Kinoshita, Nora Schelte, Thomas Spelten, Semih Severengiz, Tetsuo Yamada
- Organizer
  The 7th Asian Conference of Management Science and Applications (ASCMSA 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] Mix and Single Carbon Policy Evaluations for Cost-Effectiveness of GHG Reduction in Global Supply Chain Network2023
- Author(s)
  Miyu Kotegawa, Yuki Kinoshita, Tetsuo Yamada
- Organizer
  The 7th Asian Conference of Management Science and Applications (ACMSA 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] Multi-Criteria Decision Making of Global and Closed-Loop Supply Chain Network for GHG Emissions, Recycling Rate and Costs Using Linear Physical Programming2023
- Author(s)
  Hiromasa Ijuin, Tetsuo Yamada, Surendra M. Gupta
- Organizer
  The 6th International Conference on Remanufacturing (ICoR2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] Design Support System for Product Architecture Considering Multi-Generational Use2023
- Author(s)
  Kenichiro Kamimura, Yuki Komatsu, Kentaro Fujiwara, Shuho Yamada and Masato Inoue
- Organizer
  EcoDesign (EcoDesign 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22987
[Presentation] An Adaptive Inventory Ordering Model Using Linear Physical Programming2023
- Author(s)
  Jundai Koketsu, Aya Ishigaki, Shuho Yamada
- Organizer
  International Symposium on Scheduling 2023(ISS2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22987
[Presentation] 環境負荷と経済性を考慮したライフサイクルオプション選択に関する一考察2023
- Author(s)
  渡辺航太朗，伊集院大将，木下雄貴，高橋清悟，高田晃彦，山田哲男
- Organizer
  2023年度日本設備管理学会秋季研究発表大会
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] Effect of Supplier Selection of Electric Moped Scooters Sharing Services for Material-Based Greenhouse Gas Emissions and Costs2023
- Author(s)
  Seigo Takahashi, Hiromasa Ijuin, Thomas Spelten, Semih Severengiz, Akihito Nagahama, Tetsuo Yamada
- Organizer
  International Symposium on Scheduling 2023 (ISS2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K26329
[Presentation] リビルトコンプレッサ使用による環境負荷削減効果2022
- Author(s)
  山田周歩，堀内郁矢，井上全人，藤田光伸，早川明宏，青木累，森孝男
- Organizer
  リビルトコンプレッサ使用による環境負荷削減効果
- Data Source
  KAKENHI-PROJECT-23K22987

1. 井上全人 (60365468)

# of Collaborated Projects: 2 results

# of Collaborated Products: 6 results
2. 石垣綾 (50328564)

# of Collaborated Projects: 2 results

# of Collaborated Products: 3 results
3. 山田哲男 (90334581)

# of Collaborated Projects: 2 results

# of Collaborated Products: 24 results
4. 岡本一志 (10615032)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 長沢敬祐 (50758159)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 北田皓嗣 (90633595)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Yamada Shuho 山田 周歩

Research Projects

Research Products

Co-Researchers

Development of Weather-Driven Supply Chain GX Support System by AI and Mathematical Collaboration for Renewable Energy and Remanufacturing

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

循環可能製品のアーキテクチャ&サプライチェーン設計とマネジメント支援システムPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

経年劣化をプラスに変え価値を高める製品アーキテクチャ設計支援システム

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

[Book] EcoDesign for Sustainable Products, Services and Social Systems I2023

Author(s)

Total Pages

Publisher

ISBN

Data Source

[Journal Article] 太陽光発電における蓄電池併用時の買電・充電切換に関する事例研究2024

Author(s)

Journal Title

Data Source

[Journal Article] Seasonal Analysis and Capacity Planning of Solar Energy Demand-to-Supply Management: Case Study of a Logistics Distribution Center2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Utilization of Free Trade Agreements to Minimize Costs and Carbon Emissions in the Global Supply Chain for Sustainable Logistics2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Appropriately Limiting Quantities of Remanufacturing Products Considering Virtual Inventory for Stabilization of Production Resources2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] セットベース設計手法のアップグレード製品設計への適用2022

Author(s)

Journal Title

Data Source

[Presentation] Design of Reverse Logistics for Costs and Recycling Rate Using Machine Learning2024

Author(s)

Organizer

Data Source

[Presentation] 自動車リビルト部品の利用による環境負荷削減効果の評価（ACコンプレッサ，スタータ，オルタネータの事例）2023

Author(s)

Organizer

Data Source

[Presentation] 3次元モーションの可視化による分解作業の分析に関する一考察2023

Author(s)

Organizer

Data Source

[Presentation] サプライチェーンを考慮した製品アーキテクチャ設計支援（輸送手段ごとの配送能力に基づく評価モデル）2023

Author(s)

Organizer

Data Source

[Presentation] Repair Options in Terms of Product Value, Environmental Impact, and Cost for Automobile User2023

Author(s)

Organizer

Data Source

[Presentation] Assembly Elemental Work Analysis Using Worker Classification by Motion Capture and Machine Learning2023

Author(s)

Organizer

Data Source

[Presentation] Modeling of Disassembly Parts Selection for Recycling, CO2 Saving Rates and Cost using Linear Physical Programming2023

Author(s)

Organizer

Data Source

[Presentation] Identification of Potential Improvement Assembly Movement Using Worker Classification by Motion Capture and Machine Learning2023

Yamada Shuho 山田周歩