Ueki Kousuke 植木洸輔

… Alternative Names

Ueki Kosuke 植木洸輔

Less

Researcher Number	10845928
Other IDs
Affiliation (Current)	2025: 近畿大学, 理工学部, 准教授
Affiliation (based on the past Project Information) *help	2025: 近畿大学, 理工学部, 准教授 2021 – 2023: 近畿大学, 理工学部, 講師 2019 – 2021: 近畿大学, 理工学部, 助教
Review Section/Research Field	Principal Investigator Basic Section 26040:Structural materials and functional materials-related / 0401:Materials engineering, chemical engineering, and related fields Except Principal Investigator Basic Section 18010:Mechanics of materials and materials-related
Keywords	Principal Investigator 微細組織制御 / 機械的特性 / X線透視下視認性 / 力学特性・化学的特性 / 第一原理計算 / 医療用金属材料 / 微細組織 / ミディアムエントロピー合金 / 腐食特性 / Fe基合金 … More / 放電プラズマ焼結 / メカニカルアロイング / 生分解性金属材料 / 歪み誘起マルテンサイト変態 / 元素機能 / 析出物形成 / 加工性 / 冷間圧延 / 熱間鍛造 / 電解抽出法 / Co-20Cr-15W-10Ni合金 / 晶・析出物 / 析出挙動 / 塑性変形挙動 / Co-Cr-W-Ni合金 / バルーン拡張型ステント … More Except Principal Investigator 積層造形 / 金属 / 力学的特性 / チタン合金 / 金属製インプラント / 剛性異方性 / 骨 / インプラント / 骨固定 / 異方性 / ヤング率 / 結晶方位配向 / 金属積層造形 / ステンレス鋼 / 生体材料 Less

力学特性・X線透視下視認性・生体適合性を共立したステント用NiフリーCo基合金の創製Principal Investigator
- Principal Investigator
  
  植木洸輔
- Project Period (FY)
  2025 – 2028
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Kindai University
革新的合金設計指針による生分解性Fe基ミディアムエントロピー合金の創製Principal Investigator
- Principal Investigator
  
  植木洸輔
- Project Period (FY)
  2021 – 2024
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Kindai University
Guiding principles for design of ultra-anisotropic stiffness function of metallic implants for bone fixation
- Principal Investigator
  
  Nakai Masaaki
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Kindai University
Development of TRIP/TWIP-assisted Co-Cr alloys for next generation small diameter stentsPrincipal Investigator
- Principal Investigator
  
  Ueki Kosuke
- Project Period (FY)
  2019 – 2020
- Research Category
  
  Grant-in-Aid for Research Activity Start-up
- Review Section
  
  0401:Materials engineering, chemical engineering, and related fields
- Research Institution
  Kindai University

All 2023 2022 2021 2020

All Journal Article Presentation

[Journal Article] Improvement of mechanical properties of CoCrWNi alloy tube suitable for balloon-expandable stent applications through heat treatment2023
- Author(s)
  Takeda Shunsei、Ueki Kosuke、Ueda Kyosuke、Nakai Masaaki、Nakano Takayoshi、Narushima Takayuki
- Journal Title
  
  Materials Science and Engineering: A
  
  Volume: 862 Pages: 144505-144505
- DOI
  10.1016/j.msea.2022.144505
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H05254, KAKENHI-PROJECT-20H02036
[Journal Article] Development of biodegradable Fe-Mn-Mg alloys by mechanical alloying and spark plasma sintering2023
- Author(s)
  Ueki Kosuke、Hirano Ryo、Nakai Masaaki
- Journal Title
  
  Materials Today Communications
  
  Volume: 34 Pages: 105465-105465
- DOI
  10.1016/j.mtcomm.2023.105465
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21K14429, KAKENHI-PROJECT-20H02036
[Journal Article] Effect of low modulus titanium plate fixation on rabbit femur bone healing2022
- Author(s)
  N.B. Abdullah, D. Miyazaki, E. Yamamoto, K. Ueki and M. Nakai
- Journal Title
  
  J. Mater. Res.
  
  Volume: 37 Issue: 16 Pages: 2536-2545
- DOI
  10.1557/s43578-022-00616-z
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02036
[Journal Article] Effect of titanium plate stiffness on bone healing in rabbit femur2022
- Author(s)
  N.B. Abdullah, D. Miyazaki, E. Yamamoto, K. Ueki and M. Nakai
- Journal Title
  
  Mechanical Engineering Journal
  
  Volume: 9 Issue: 6 Pages: 22-00282-22-00282
- DOI
  10.1299/mej.22-00282
- ISSN
  2187-9745
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02036
[Journal Article] Mechanical properties of biomedical 316L stainless steel plates with in-plane orthogonal anisotropy by aligning crystallographical orientation via additive manufacturing2021
- Author(s)
  仲井正昭, 佐脇凜, 植木洸輔, 黒須信吾, 南部智憲
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 87 Issue: 900 Pages: 21-00101-21-00101
- DOI
  10.1299/transjsme.21-00101
- NAID
  130008078059
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02036
[Journal Article] Improvement of Mechanical Properties by Microstructural Evolution of Biomedical Co–Cr–W–Ni Alloys with the Addition of Mn and Si2021
- Author(s)
  Kosuke Ueki, Soh Yanagihara, Kyosuke Ueda, Masaaki Nakai, Takayoshi Nakano, Takayuki Narushima
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 62 Issue: 2 Pages: 229-238
- DOI
  10.2320/matertrans.MT-M2020300
- NAID
  130007974690
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2021-02-01
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19K23580, KAKENHI-PROJECT-20H02036
[Journal Article] Development of low-yield stress Co-Cr-W-Ni alloy by adding 6 mass pct Mn for balloon-expandable stents2021
- Author(s)
  S. Yanagihara, K. Ueki, K. Ueda, M. Nakai, T. Nakano and T. Narushima
- Journal Title
  
  Metall. Mater. Trans. A
  
  Volume: 52 Issue: 9 Pages: 4135-4145
- DOI
  10.1007/s11661-021-06374-7
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20H02036
[Journal Article] Improvement of strength and ductility by combining static recrystallization and unique heat treatment in Co-20Cr-15W-10Ni alloy for stent application2021
- Author(s)
  K. Ueki, S. Yanagihara, K. Ueda, M. Nakai, T. Nakano and T. Narushima
- Journal Title
  
  Mater. Sci. Forum
  
  Volume: 1016 Pages: 1503-1509
- DOI
  10.4028/www.scientific.net/msf.1016.1503
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02036
[Journal Article] Differences in the effect of surface texturing on the wear loss of β-type Ti-Nb-Ta-Zr and (α+β)-type Ti-6Al-4V ELI alloys in contact with zirconia in physiological saline solution2021
- Author(s)
  M. Nakai, T. Iwasaki and K. Ueki
- Journal Title
  
  J. Mech. Behav. Biomed. Mater.
  
  Volume: 124 Pages: 104808-104808
- DOI
  10.1016/j.jmbbm.2021.104808
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] Effect of Mg addition on mechanical and corrosive properties of biodegradable Fe-Mn alloy fabricated by mechanical alloying and spark plasma sintering2023
- Author(s)
  Kosuke Ueki, Ryo Hirano, Masaaki Nakai
- Organizer
  Biomaterials International 2023
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21K14429
[Presentation] 生体用Co-Cr-W-Ni合金におけるメカニカルミリング法と放電プラズマ焼結を用いた調和組織形成による機械的特性向上2023
- Author(s)
  植木洸輔, 水谷祐太, 仲井正昭
- Organizer
  日本金属学会2023年春期（第172回）講演大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] Effect of Mg addition on mechanical and corrosive properties of biodegradable Fe-Mn alloy fabricated by mechanical alloying and spark plasma sintering2023
- Author(s)
  Kosuke Ueki Ryo HIrano, Masaaki Nakai
- Organizer
  Biomaterials International 2023
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21K14429
[Presentation] 弾性率の異なるTi合金プレートで固定した家兎大腿骨に形成された仮骨の定量評価2023
- Author(s)
  宮﨑大輔, ノルアインビンティアブドラー, 山本衛, 植木洸輔, 仲井正昭
- Organizer
  日本金属学会2023年春期（第172回）講演大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] 骨治癒の進行に及ぼすチタンインプラントプレートの剛性の影響2023
- Author(s)
  ノルアインビンティアブドラー, 宮崎大輔, 山本衛, 植木洸輔, 仲井正昭
- Organizer
  日本金属学会2023年春期（第172回）講演大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] SUS316Lステンレス鋼積層造形板における結晶方位配向と力学的特性に及ぼす造形条件の影響2022
- Author(s)
  佐脇凜, 黒須信吾, 南部智憲, 植木洸輔, 仲井正昭
- Organizer
  日本鋳造工学会関西支部令和4年度秋季支部講演大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] Bone formation pattern after titanium alloy implantation in rabbit femur during early stage of healing2022
- Author(s)
  N.B. Abdullah, D. Miyazaki, E. Yamamoto, K. Ueki and M. Nakai
- Organizer
  International Workshop on Advanced Experimental Mechanics for Students and Young Researchers 2022 (IWAEM'22)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] メカニカルアロイングおよび放電プラズマ焼結によって作製したFe-Mn-Mg合金の相変態挙動と機械的および腐食特性2022
- Author(s)
  植木洸輔, 平野涼, 仲井正昭
- Organizer
  公益社団法人日本金属学会 2022年春期(第170回)講演大会
- Data Source
  KAKENHI-PROJECT-21K14429
[Presentation] 骨治癒時の仮骨形成パターンに及ぼすインプラントプレートの剛性の影響2022
- Author(s)
  ノルアインビンティアブドラ―, 宮崎大輔, 山本衛, 植木洸輔, 仲井正昭
- Organizer
  日本金属学会2022年秋期（第171回）講演大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] メカニカルアロイングおよび放電プラズマ焼結によって作製したFe-Mn-Mg合金の相変態挙動と機械的および腐食特性2022
- Author(s)
  植木洸輔、平野涼、仲井正昭
- Organizer
  公益社団法人日本金属学会 2022年春期(第170回)講演大会
- Data Source
  KAKENHI-PROJECT-21K14429
[Presentation] Effects of elastic modulus differences between titanium alloys and bone on bone formation during early stage of healing2022
- Author(s)
  N.B. Abdullah, D. Miyazaki, E. Yamamoto, K. Ueki and M. Nakai
- Organizer
  第61回日本生体医工学会大会2022
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] 窒化真空複合処理による医療用チタン合金の硬化膜の形成2022
- Author(s)
  濱遼, 植木洸輔, 仲井正昭
- Organizer
  日本鋳造工学会関西支部令和4年度秋季支部講演大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] 高濃度Taを含有するTi合金インゴット内部のTa濃度分布と局所的ヤング率2022
- Author(s)
  大田尚輝, 植木洸輔, 仲井正昭
- Organizer
  日本金属学会2022年秋期（第171回）講演大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] 生体用Co-Cr-W-Ni合金におけるFe添加が機械的特性および耐食性に与える影響2022
- Author(s)
  肥田輝, 植木洸輔, 上田恭介, 成島尚之, 仲井正昭
- Organizer
  日本金属学会2022年秋期（第171回）講演大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] Effects of titanium plate fixation on callus formation during early stage of bone healing2021
- Author(s)
  N.B. Abdullah, D. Miyazaki, M. Nakai, K. Ueki, E. Yamamoto
- Organizer
  第4回日本金属学会第７分野講演会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] 高濃度Taを含有するTi合金の溶解・凝固特性2021
- Author(s)
  大田尚輝, 植木洸輔, 仲井正昭
- Organizer
  日本金属学会2022年春期（第170回）大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] メカニカルアロイングおよび放電プラズマ焼結によって作製したFe-Mn-Mg合金の相変態挙動と機械的および腐食特性2021
- Author(s)
  植木洸輔, 平野涼, 仲井正昭
- Organizer
  日本金属学会2022年春期（第170回）大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] メカニカルアロイングと放電プラズマ焼結による生体用Fe-Mn-Mg合金の開発2021
- Author(s)
  平野涼、植木洸輔、仲井正昭
- Organizer
  公益社団法人日本金属学会 2021年秋期第169回講演大会
- Data Source
  KAKENHI-PROJECT-21K14429
[Presentation] 初期治癒段階における骨形成に及ぼすインプラントプレートと骨との弾性率差の影響2021
- Author(s)
  ノルアインビンティアブドラー, 宮崎大輔, 山本衛, 植木洸輔, 仲井正昭
- Organizer
  日本金属学会2022年春期（第170回）大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] MnおよびSiを添加したステント用Co-Cr合金の微細組織と機械的特性2020
- Author(s)
  柳原創, 植木洸輔, 上田恭介, 仲井正昭, 中野貴由, 成島尚之
- Organizer
  日本金属学会2020年秋期（第167回）大会
- Data Source
  KAKENHI-PROJECT-20H02036
[Presentation] MnおよびSiを添加したステント用Co-Cr合金の微細組織と機械的特性2020
- Author(s)
  柳原創、植木洸輔、上田恭介、仲井正昭、中野貴由、成島尚之
- Organizer
  日本金属学会2020年秋期講演大会(第167回)
- Data Source
  KAKENHI-PROJECT-19K23580
[Presentation] 生体用Co-Cr-W-Ni合金における加工熱処理プロセスによるバイモーダル組織形成と機械的特性評価2020
- Author(s)
  平野涼、植木洸輔、成島尚之、仲井正昭
- Organizer
  公益社団法人日本金属学会 2020年春期(第 166回)講演大会
- Data Source
  KAKENHI-PROJECT-19K23580
[Presentation] 電子ビーム積層造形法により作製した生体用Co-Cr-Mo合金の逆変態熱処理による結晶粒微細化と晶析出物相の関係2020
- Author(s)
  植木洸輔、笠松初香、上田恭介、小泉雄一郎、魏代修、千葉晶彦、成島尚之
- Organizer
  公益社団法人日本金属学会 2020年春期(第 166回)講演大会
- Data Source
  KAKENHI-PROJECT-19K23580

1. Nakai Masaaki (20431603)

# of Collaborated Projects: 2 results

# of Collaborated Products: 19 results
2. 坂田誠一郎 (80325042)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. 山本衛 (00309270)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
4. 京極秀樹 (10258056)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 大津直史 (10400409)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 平野満大 (10911092)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 中野貴由

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

Ueki Kousuke 植木 洸輔

Ueki Kosuke 植木 洸輔

Research Projects

Research Products

Co-Researchers

力学特性・X線透視下視認性・生体適合性を共立したステント用NiフリーCo基合金の創製Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

革新的合金設計指針による生分解性Fe基ミディアムエントロピー合金の創製Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Guiding principles for design of ultra-anisotropic stiffness function of metallic implants for bone fixation

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of TRIP/TWIP-assisted Co-Cr alloys for next generation small diameter stentsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

[Journal Article] Improvement of mechanical properties of CoCrWNi alloy tube suitable for balloon-expandable stent applications through heat treatment2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Development of biodegradable Fe-Mn-Mg alloys by mechanical alloying and spark plasma sintering2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Effect of low modulus titanium plate fixation on rabbit femur bone healing2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Effect of titanium plate stiffness on bone healing in rabbit femur2022

Author(s)

Journal Title

DOI

ISSN

Language

Data Source

[Journal Article] Mechanical properties of biomedical 316L stainless steel plates with in-plane orthogonal anisotropy by aligning crystallographical orientation via additive manufacturing2021

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Journal Article] Improvement of Mechanical Properties by Microstructural Evolution of Biomedical Co–Cr–W–Ni Alloys with the Addition of Mn and Si2021

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

[Journal Article] Development of low-yield stress Co-Cr-W-Ni alloy by adding 6 mass pct Mn for balloon-expandable stents2021

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Improvement of strength and ductility by combining static recrystallization and unique heat treatment in Co-20Cr-15W-10Ni alloy for stent application2021

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Differences in the effect of surface texturing on the wear loss of β-type Ti-Nb-Ta-Zr and (α+β)-type Ti-6Al-4V ELI alloys in contact with zirconia in physiological saline solution2021

Author(s)

Ueki Kousuke 植木洸輔

Ueki Kosuke 植木洸輔