Takuda Hirohiko 宅田裕彦

… Alternative Names

TAKUDA Hirohiko 宅田裕彦

Less

Researcher Number	20135528
Other IDs
External Links
Affiliation (Current)	2025: 京都大学, エネルギー科学研究科, 教授
Affiliation (based on the past Project Information) *help	2004 – 2019: 京都大学, エネルギー科学研究科, 教授 2012: 京都大学, 大学院・エネルギー科学研究科, 教授 2009: Kyoto University, 大学院・エネルギー科学研究科, 教授 2000: Kyoto University, Energy Science, Associate Professor, エネルギー化学研究科, 助教授 1996 – 2000: Kyoto University, Department of Energy Science and Technology, Associate Profess, エネルギー科学研究科, 助教授 … More 1999: 京都大学, 大学院・エネルギー科学研究科, 助教授 1995: 京都大学, 工学部, 助教授 1992 – 1993: 京都大学, 工学部, 講師 1989 – 1990: 京都大学, 工学部, 講師 1986: Kyoto University, Instructor, Faculty of Eng, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Material processing/Microstructural control engineering / Material processing/treatments / Material processing/treatments Except Principal Investigator Material processing/treatments / 金属加工(含鋳造) / Thermal engineering / Material processing/Microstructural control engineering / Material processing/treatments
Keywords	Principal Investigator 環境材料 / 電縫鋼管 / 高張力鋼板 / ロール成形 / 有限要素法 / 成形限界 / 板材成形 / 環境調和型材料 / マルチスケール変形 / 結晶塑性解析 … More / 環境調和型金属 / 不均一変形 / デジタル画像相関法 / 粗大結晶粒材 / 結晶塑性有限要素法 / FE simulation / Forming limit / Steel sheet / Sheet forming / 有限要素シミュレーション / 鋼板 / 加工硬化特性 / 高延性 / 摩擦低減効果 / 圧力媒体流出 / 液圧分布 / 対向液圧成形 / 延性破壊条件式 … More Except Principal Investigator 自由表面 / 数値解析 / スプレー冷却 / free surface / ライデンフロスト温度 / 沸騰 / spray cooling / Weber number / ウェーバー数 / ウェーバ数 / Leidenfrost temperature / 熱伝達 / 可視化実験 / 液滴 / プレス成形 / numerical simulation / レイノルズ数 / numerical analysis / 表面張力 / 液滴の変形挙動 / Film boiling heat transfer / Estimation of cooling capacity / 濡れ現象 / 冷却能評価 / 冷却能制御 / 膜沸騰 / 二相流 / 環境調和型加工 / 結晶塑性有限要素法 / 対流 / 結晶塑性解析 / 加工硬化挙動 / 環境調和型金属 / 板材成形 / 時間依存変形 / 高分子ポリマー / 水溶性高分子ポリマー / 焼き入れ噴霧冷却 / 沸騰熱伝達 / 熱分解 / 水溶性ポリマー / droplet dynamics / flow visualization / boiling heat transfer / aqueous polymer / bar thickness / crater-end / meniscus / slab temperature / cast slab / hot rolling / continuous casting / 冷却 / 板厚 / 凝固点 / 湯面 / 連鋳スラブ / 熱間圧延 / 連続鋳造 / warm and hot shearing / die quenching / springback / press forming / warm and hot forming / heating of sheet set into die / resistance heating / ultra high tensile strength steel sheet / 温・熱間せん断加工 / ダイクエンチ / スプリングバック / 温・熱間成形 / 型内加熱 / 通電加熱 / 超高張力鋼板 / photography / interaction phenomena / droplet / 数値シミュレーション / 伝熱 / 3次元数値解析 / 干渉 / 観察実験 / 相互干渉 / boiling / Reynolds number / Collision of droplets / ヌセルト数 / 気泡 / 液滴衝突 / Black Zone / Boiling / Vapor filw / liguid Interface / Solid / Wething Pheaomenon / Leidenfrost point / Hot wetallic surface / 固液接触 / ブラックゾーン / 蒸気膜 / 固液界面 / ライデンフロスト点 / 超高温金属表面 / immersion nozzle / water model / multi-fluid model / multi-phase flow / powder entrapping / mold / 流動様式 / 浸漬ノズル / 水モデル / 多流体モデル / 混相流 / パウダー巻き込み / モ-ルド / surface material / surface tension / deformation process of droplet / 表面粗さ / 液滴粒子 / 変形挙動 / 表面の材質 / Predictable modelling / Collision and deformation of droplet on a plate / Gas-particle two-phase flow / Water spray / Mist flow / 濡れ点 / 水量密度 / ローディング比 / 気一液の相流 / 予知モデル / 膜沸騰熱伝達 / 平板に衝突する液滴の変形 / スプレー流 / ミスト流 / Nusselt number / Water film flow / Last finisher / Laminar cooling / Hotrun table / 流れ場 / 高温鋼板 / 冷却プロセス / ラミナー流 / ホットランテーブル / ヌッセルト数 / 水膜流 / 最終圧延 / ラミナー冷却 / ホットランテーブル / 07Interaction between Liquid Particles and Solid Wall / Film Boiling Mechanism / Spray Film Cooling / Heat Transfer Process / Simulation of Two-Phase Flow Fields / Impinging Two-Phase Jet / Design of Nozzle Geometry / Spray or Mist Cooling / 沸騰・非沸騰 / 2相流の固体壁面との相互作用 / ガス-粒子の相自由噴流 / 粒子群離散化モデル / ノズルの形状設計 / ガス-粒子2相非平衡ノズル / スプレ-およびミスト / 壁面と粒子群の衝突 / 膜沸騰機構 / 二相流の自由噴流 / 空気と水滴群の流れ場 / スプレ-ノズルの設計 / 流れ場の数値解析 / 鋼材の緩冷却 / 熱伝導 / ライデンフロスト運動 / 衝突機構 / 自由噴流 / ノズル内流動 / ミスト冷却 / プレス加工 / 加工硬化特性 / 熱工学 / 可視化 Less

Investigation of multiscale deformation behavior of metals using crystal-plasticity modeling and digital-image correlation measurementsPrincipal Investigator
- Principal Investigator
  
  Takuda Hirohiko
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Kyoto University
Crystal-plasticity modeling of time-dependent deformation behavior of metallic sheets and its application to press forming simulations
- Principal Investigator
  
  Hama Takayuki
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Kyoto University
Transient contact behavior of aqueous polymer solution droplets with hot solid and formation process of polymer enriched-layer
- Principal Investigator
  
  FUJIMOTO HITOSHI
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  Kyoto University
Accurate prediction of work-hardening behavior of metallic sheets using crystal-plasticity analysis and its application to sheet metal forming simulations
- Principal Investigator
  
  Hama Takayuki
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Kyoto University
Prediction of formability of electric resistance welded high-strength steel tubes on basis of accurate evaluation of work-hardening behaviorPrincipal Investigator
- Principal Investigator
  
  Takuda Hirohiko
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Kyoto University
Roll forming of electric resistance welded pipes with high ductilityPrincipal Investigator
- Principal Investigator
  
  TAKUDA Hirohiko
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyoto University
Hydrodynamics and boiling phenomena of droplets impinging on hot solid
- Principal Investigator
  
  FUJIMOTO Hitoshi
- Project Period (FY)
  2009 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  Kyoto University
Outflow characteristics of a pressure medium during sheet hydroforming and its finite element modelingPrincipal Investigator
- Principal Investigator
  
  TAKUDA Hirohiko
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyoto University
Development of Warm and Hot Press Forming of Ultra High Strength Steel Sheets Using Resistance Heating
- Principal Investigator
  
  MORI Ken-ichiro
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
Deformation behavior and heat transfer of droplets successively impinging onto a solid substrate
- Principal Investigator
  
  FUJIMOTO Hitoshi
- Project Period (FY)
  2004 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  Kyoto University
Interfacial phenomena of coolant contacting with superhot surface
- Principal Investigator
  
  HATTA Natsao
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  Material processing/treatments
- Research Institution
  Nippon Bunri University
  Kyoto University
Collision Dynamics of Droplets Impinging into a Hot Solid
- Principal Investigator
  
  FUJIMOTO Hitoshi
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  KYOTO UNIVERSITY
Formability of special steel sheets of high quality and its predictionPrincipal Investigator
- Principal Investigator
  
  TAKEDA Hirohiko
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  KYOTO UNIVERSITY
板材成形における成形限界予測への延性破壊条件式の適用Principal Investigator
- Principal Investigator
  
  宅田裕彦
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyoto University
Deformation behavior of a liquid droplet impinging on hot metallic surfaces above the Leidenfrost temperature
- Principal Investigator
  
  HATTA Natsuo
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  KYOTO UNIVERSITY
Prediction and control of powder entrapping at meniscus of molten steel in a continuous casting mold
- Principal Investigator
  
  HATTA Natsuo
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  KYOTO UNIVERSITY
Prediction and control of flow properties and cooling process for a hot strip on a runout table by water film
- Principal Investigator
  
  HATTA Natsuo
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  KYOTO UNIVERSITY
Development of optimum cooling systemn of water spraying for a high temperature metal
- Principal Investigator
  
  HATTA Natsuo
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  KYOTO UNIVERSITY
Capacity and Estimation on Liquid Spray Cooling on a Hot Surface of Just Solidified Steel Shell.
- Principal Investigator
  
  HATTA Natsuo
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  Kyoto University
Study on possibility of unification between the continuous casting and hot rolling processes
- Principal Investigator
  
  KOKADO Jun-ichi
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  Kyoto University

[Journal Article] Time-dependent springback of various sheet metals: an experimental study2020
- Author(s)
  Hama, T., Suzuki, T., Nakatsuji, Y., Sakai, T., and Takuda, H.
- Journal Title
  
  Materials Transactions
  
  Volume: -
- NAID
  120006841686
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06858
[Journal Article] Time-dependent springback of various sheet metals: an experimental study2020
- Author(s)
  Hama, T., Suzuki, T., Nakatsuji, Y., Sakai, T., and Takuda, H.
- Journal Title
  
  Materials Transactions
  
  Volume: -
- NAID
  120006841686
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17H03428
[Journal Article] Influence of critical resolved shear stress ratios on the response of a commercially pure titanium oligocrystal: crystal plasticity simulations and experiment2019
- Author(s)
  Baudoin, P., Hama, T., and Takuda, H.
- Journal Title
  
  International Journal of Plasticity
  
  Volume: 115 Pages: 111-131
- DOI
  10.1016/j.ijplas.2018.11.013
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06858, KAKENHI-PROJECT-17H03428
[Journal Article] Crystal plasticity finite-element simulation of deep drawing of commercially-pure titanium sheet2019
- Author(s)
  Hama, T., Hirano, K., Matsuura, R., Korkolis, Y.P., and Takuda, H.
- Journal Title
  
  Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes
  
  Volume: -
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03428
[Journal Article] Crystal plasticity finite-element simulation of deep drawing of commercially-pure titanium sheet2019
- Author(s)
  Hama, T., Hirano, K., Matsuura, R., Korkolis, Y.P., and Takuda, H.
- Journal Title
  
  Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM2019)
  
  Volume: -
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06858
[Journal Article] Role of twinning on the stress and strain behaviors during reverse loading in rolled magnesium alloy sheets2018
- Author(s)
  Hama, T., Suzuki, T., Hatakeyama, S., Fujimoto, H., and Takuda, H.
- Journal Title
  
  Materials Science & Engineering A
  
  Volume: 725 Pages: 8-18
- DOI
  10.1016/j.msea.2018.03.124
- NAID
  120006545211
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06858, KAKENHI-PROJECT-17H03428
[Journal Article] Crystal plasticity finite-element analysis of surface roughening behavior in biaxial stretching of steel sheets2018
- Author(s)
  Kubo, M., Hama, T., Tsunemi, Y., Nakazawa, Y., and Takuda, H.
- Journal Title
  
  Journal of Physics: Conf. Series
  
  Volume: 1063
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17H03428
[Journal Article] Crystal-plasticity finite-element simulation of time-dependent springback in a commercially-pure titanium sheet2018
- Author(s)
  Hama, T., Sakai, T., Korkolis, Y.P., and Takuda, H.
- Journal Title
  
  Journal of Physics: Conf. Series
  
  Volume: 1063
- NAID
  120006543401
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03428
[Journal Article] Influence of Strain Ratio on Surface Roughening in Biaxial Stretching of IF Steel Sheets2018
- Author(s)
  Kubo, M., Hama, T., Tsunemi, Y., Nakazawa, Y., and Takuda, H.
- Journal Title
  
  ISIJ International
  
  Volume: 58 Issue: 4 Pages: 704-713
- DOI
  10.2355/isijinternational.ISIJINT-2017-612
- NAID
  130006708233
- ISSN
  0915-1559, 1347-5460
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06858, KAKENHI-PROJECT-17H03428
[Journal Article] Crystal-plasticity finite-element simulation of time-dependent springback in a commerciallypure titanium sheet2018
- Author(s)
  Hama, T., Sakai, T., Korkolis, Y.P., and Takuda, H.
- Journal Title
  
  Journal of Physics: Conf. Series
  
  Volume: 1063
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06858
[Journal Article] Crystal plasticity analysis of the deformation of a grade 2 CP-Ti oligocrystal2018
- Author(s)
  Baudoin, P., Hama, T., Uchida, S., and Takuda, H.
- Journal Title
  
  Journal of Physics: Conf. Series
  
  Volume: 1063
- NAID
  120006695571
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06858
[Journal Article] Crystal plasticity finite-element analysis of surface roughening behavior in biaxial stretching of steel sheets2018
- Author(s)
  Kubo, M., Hama, T., Tsunemi, Y., Nakazawa, Y., and Takuda, H.
- Journal Title
  
  Journal of Physics: Conf. Series
  
  Volume: 1063
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06858
[Journal Article] Crystal plasticity analysis of the deformation of a grade 2 CP-Ti oligocrystal2018
- Author(s)
  Baudoin, P., Hama, T., Uchida, S., and Takuda, H.,
- Journal Title
  
  Journal of Physics: Conf. Series
  
  Volume: 1063
- NAID
  120006695571
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17H03428
[Journal Article] Prediction of differential work-hardening behavior under biaxial tension of steel sheet using crystal plasticity models2018
- Author(s)
  Hama, T., Fujimoto, H., and Takuda, H.
- Journal Title
  
  Procedia Manufacturing
  
  Volume: 15 Pages: 1808-1815
- DOI
  10.1016/j.promfg.2018.07.210
- NAID
  120006695790
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06858, KAKENHI-PROJECT-17H03428
[Journal Article] Transient contact behavior of aqueous polymer solution droplets with transparent hot solid2018
- Author(s)
  Hitoshi Fujimoto, Shogo Sakane, Takayuki Hama, Hirohiko Takuda
- Journal Title
  
  Experimental Thermal and Fluid Science
  
  Volume: 96 Pages: 1-10
- DOI
  10.1016/j.expthermflusci.2018.02.026
- NAID
  120006596511
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05825
[Journal Article] Crystal plasticity finite-element simulation on development of dislocation structures in BCC ferritic single crystals2017
- Author(s)
  Hama, T., Kojima, K., Kubo, M., Fujimoto, H., and Takuda, H.
- Journal Title
  
  ISIJ International
  
  Volume: 印刷中
- NAID
  130005661941
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26289271
[Journal Article] Crystal-plasticity finite-element analysis of anisotropic deformation behavior in commercially pure titanium Grade 1 sheet2017
- Author(s)
  Hama, T., Kobuki, A., and Takuda, H.
- Journal Title
  
  International Journal of Plasticity
  
  Volume: 印刷中 Pages: 77-108
- DOI
  10.1016/j.ijplas.2016.12.005
- NAID
  120006369431
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26289271, KAKENHI-PROJECT-17K06858, KAKENHI-PROJECT-17H03428
[Journal Article] Deformation behavior of two droplets successively impinging obliquely on hot solid surface2017
- Author(s)
  Hitoshi Fujimoto, Soushi Yoshimoto, Ken Takahashi, Takayuki Hama, Hirohiko Takuda
- Journal Title
  
  Experimental Thermal and Fluid Science
  
  Volume: 81 Pages: 136-146
- DOI
  10.1016/j.expthermflusci.2016.10.009
- NAID
  120006305977
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K05825
[Journal Article] Time-dependent springback of a commercially pure titanium sheet2017
- Author(s)
  Hama Takayuki、Sakai Takeyuki、Fujisaki Yusuke、Fujimoto Hitoshi、Takuda Hirohiko
- Journal Title
  
  Procedia Engineering
  
  Volume: 207 Pages: 263-268
- DOI
  10.1016/j.proeng.2017.10.772
- NAID
  120006369430
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17H03428
[Journal Article] Crystal Plasticity Finite-element Simulation on Development of Dislocation Structures in BCC Ferritic Single Crystals2017
- Author(s)
  Hama, T., Kojima, K., Kubo, M., Fujimoto, H., and Takuda, H.
- Journal Title
  
  ISIJ International
  
  Volume: 57 Issue: 5 Pages: 866-874
- DOI
  10.2355/isijinternational.ISIJINT-2017-011
- NAID
  130005661941
- ISSN
  0915-1559, 1347-5460
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06858, KAKENHI-PROJECT-17H03428
[Journal Article] Hydrodynamics and heat transfer characteristics of oil-in-water emulsion droplets impinging on hot stainless steel foil2017
- Author(s)
  Hitoshi Fujimoto, Wataru Obana, Masayoshi Ashida, Takayuki Hama, Hirohiko Takuda
- Journal Title
  
  Experimental Thermal and Fluid Science
  
  Volume: 85 Pages: 201-212
- DOI
  10.1016/j.expthermflusci.2017.02.024
- NAID
  120006305976
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K05825
[Journal Article] Work-hardening behavior of commercially pure titanium JIS grade 1 sheet upon reverse loading2016
- Author(s)
  Hama, T., Yi Ning, Kobuki, A., Uchida, S., Fujimoto, H., and Takuda, H.
- Journal Title
  
  AIP Conference Proceedings
  
  Volume: 1769 Pages: 200001-200001
- DOI
  10.1063/1.4963619
- NAID
  120006705773
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26289271
[Journal Article] Deformation behavior upon two-step loading in a magnesium alloy sheet2016
- Author(s)
  Hama, T., Tanaka, Y., Uratani, M., and Takuda, H.
- Journal Title
  
  International Journal of Plasticity
  
  Volume: in press Pages: 283-304
- DOI
  10.1016/j.ijplas.2016.03.009
- NAID
  120005973329
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289265, KAKENHI-PROJECT-26289271
[Journal Article] Anisotropic deformation behavior under various strain paths in commercially pure titanium Grade 1 and Grade 2 sheets2016
- Author(s)
  Yi, Ning, Hama, T., Kobuki, A., Fujimoto, H., and Takuda, H.
- Journal Title
  
  Materials Science & Engineering A
  
  Volume: 655 Pages: 70-85
- DOI
  10.1016/j.msea.2015.12.081
- NAID
  120005973305
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26289271
[Journal Article] Crystal-plasticity finite-element analysis of deformation behavior in a commercially pure titanium sheet2016
- Author(s)
  Hama, T., Kobuki, A., Fujimoto, H., and Takuda, H.
- Journal Title
  
  Journal of Physics: Conference Series
  
  Volume: 734
- NAID
  120006654034
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26289271
[Journal Article] Non-linear deformation behavior during unloading in various metal sheets2015
- Author(s)
  Takayuki Hama, Ryogo Matsudai, Yota Kuchinomachi, Hitoshi Fujimoto, and Hirohiko Takuda
- Journal Title
  
  ISIJ International
  
  Volume: 55 Pages: 1-9
- NAID
  130005071654
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26289271
[Journal Article] Deformation behavior of a magnesium alloy sheet with random crystallographic orientations under various loading paths2015
- Author(s)
  Hama, T., Mayama, T., and Takuda, H.
- Journal Title
  
  The Romanian Journal of Technical Sciences-Applied Mechanics
  
  Volume: 60 Pages: 1-16
- NAID
  120006305912
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26289271
[Journal Article] Effect of pre-compressive strain on work-hardening behavior upon two-step loading in a Magnesium alloy sheet2015
- Author(s)
  Takayuki Hama, Yuhki Tanaka, Masato Uratani, Tsutomu Tanaka, Hitoshi Fujimoto, and Hirohiko Takuda
- Journal Title
  
  Key Engineering Materials
  
  Volume: 639 Pages: 347-352
- DOI
  10.4028/www.scientific.net/kem.639.347
- NAID
  120006654070
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289265, KAKENHI-PROJECT-26289271
[Journal Article] Work-hardening and twinning behaviors in a commercially pure titanium sheet under various loading paths2014
- Author(s)
  Takayuki Hama, Hirotaka Nagao, Akihiro Kobuki, Hitoshi Fujimoto, Hirohiko Takuda
- Journal Title
  
  Materials Science and Engineering A
  
  Volume: 620 Pages: 390-398
- DOI
  10.1016/j.msea.2014.10.024
- NAID
  120005522511
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289265, KAKENHI-PROJECT-26289271
[Journal Article] Deformation behavior of a magnesium alloy sheet with random crystallographic orientations2014
- Author(s)
  T.Hama, T.Mayama, H.Takuda
- Journal Title
  
  Key Engineering Materials
  
  Volume: 611-612 Pages: 27-32
- DOI
  10.4028/www.scientific.net/kem.611-612.27
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23246122, KAKENHI-PROJECT-24760081, KAKENHI-PROJECT-25289265, KAKENHI-PUBLICLY-26109717, KAKENHI-PROJECT-26289271
[Journal Article] Work-hardening behavior upon reverse loading in a rolled AZ31 magnesium alloy sheet2014
- Author(s)
  Takayuki Hama, and Hirohiko Takuda
- Journal Title
  
  Key Engineering Materials
  
  Volume: 622-623 Pages: 603-608
- DOI
  10.4028/www.scientific.net/kem.622-623.603
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289265, KAKENHI-PROJECT-26289271
[Journal Article] 高強度鋼板の曲げ成形におけるロール形式の影響–電縫鋼管のロール成形シミュレーション第2報–2013
- Author(s)
  井口敬之助, 栗山幸久, 師井直紀, 浜孝之, 宅田裕彦
- Journal Title
  
  塑性と加工
  
  Volume: 54-628 Pages: 436-440
- NAID
  10031159283
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560864
[Journal Article] 高強度鋼板の曲げ成形におけるロール形式の影響 -電縫鋼管のロール成形シミュレーション　第2報-2013
- Author(s)
  井口敬之助，栗山幸久，師井直紀，浜孝之，宅田裕彦
- Journal Title
  
  塑性と加工
  
  Volume: 54 Pages: 436-440
- NAID
  10031159283
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560864
[Journal Article] An Experimental Study on the Oblique Collisions of Water Droplets with a Smooth Hot Solid2012
- Author(s)
  Hitoshi Fujimoto, Ryota Doi, and Hirohiko Takuda.
- Journal Title
  
  Transactions of the ASME Journal of Fluids Engineering
  
  Volume: 134-7 Issue: 7
- DOI
  10.1115/1.4006926
- NAID
  120006596491
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] 高張力鋼板のロール成形におけるスプリングバックの検討–電縫鋼管のロール成形シミュレーション第1報–2012
- Author(s)
  井口敬之助, 栗山幸久, 師井直紀, 浜孝之, 宅田裕彦
- Journal Title
  
  塑性と加工
  
  Volume: 53-622 Pages: 1003-1007
- NAID
  10031126216
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560864
[Journal Article] Deformation behavior of high strength steel sheet during roll forming of electric resistance welded pipe2012
- Author(s)
  Iguchi, K., Kuriyama, Y., Moroi, N., Hama, T., and Takuda, H.
- Journal Title
  
  Steel Research International
  
  Volume: Special Edition Pages: 927-930
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560864
[Journal Article] 高張力鋼板のロール成形におけるスプリングバックの検討　-電縫鋼管のロール成形シミュレーション　第1報-2012
- Author(s)
  井口敬之助，栗山幸久，師井直紀，浜孝之，宅田裕彦
- Journal Title
  
  塑性と加工
  
  Volume: 53-622 Pages: 1003-1007
- NAID
  10031126216
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560864
[Journal Article] AN EXPERIMENTAL STUDY OF THE DEFORMATION BEHAVIOR OF WATER DROPLETS IMINGING OBLIQUELY ON A HOT SUBSTRATE2010
- Author(s)
  H.Fujimoto, H.Takuda, et al.
- Journal Title
  
  Journal of Flow Visualization and Image Processing 17(in press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] An Experimental Study of the Deformation behavior of Water Droplets Impinging Obliquely on a Hot Substrate2010
- Author(s)
  Hitoshi Fujimoto, Yosuke Oku, Tomohiro Ogihara, Takayuki Hama, and Hirohiko Takuda
- Journal Title
  
  Journal of Flow Visualizaion and Image Processing
  
  Volume: 17-2 Issue: 2 Pages: 1-16
- DOI
  10.1615/jflowvisimageproc.v17.i2.20
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] Hydrodynamics and boiling phenomena of water droplets impinging on hot solid2010
- Author(s)
  Hitoshi Fujimoto, Yosuke Oku, Tomohiro Ogihara, Hirohiko Takuda
- Journal Title
  
  International Journal of Multiphase Flow
  
  Volume: 36-8 Issue: 8 Pages: 620-642
- DOI
  10.1016/j.ijmultiphaseflow.2010.04.004
- NAID
  120002484955
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] Correlation between sheet deformation and hydraulic pressure variation during sheet hydroforming2009
- Author(s)
  Hama, T., Matsushima, K., Kitajima, T., Fujimoto, H., Takuda, H.
- Journal Title
  
  ISIJ International 49
  
  Pages: 1736-1743
- NAID
  10027037763
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560727
[Journal Article] Correlation between sheet deformation and hydraulic pressure variation during sheet hydroforming2009
- Author(s)
  Takayuki Hama, Keita Matsushima, Toru Kitajima, Hitoshi Fujimoto, Hirohiko Takuda
- Journal Title
  
  ISIJ International 18203
  
  Pages: 1736-1743
- NAID
  10027037763
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560727
[Journal Article] Outflow characteristics of a pressure medium during sheet hydroforming2009
- Author(s)
  Takayuki HAMA, Ken KURISU, Keita Matsushima, Hitoshi FUJIMOTO, Hirohiko TAKUDA
- Journal Title
  
  ISIJ International 49
  
  Pages: 239-246
- NAID
  10027033244
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560727
[Journal Article] Outflow characteristics of a pressure medium during sheet hydroforming2009
- Author(s)
  Takayuki Hama, Ken Kurisu, Keita Hydraulic pressure /MPa Matsushima, Hitoshi Fujimoto, Hirohiko Takuda
- Journal Title
  
  ISIJ International 17930
  
  Pages: 239-246
- NAID
  10027033244
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560727
[Journal Article] Three-dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate2007
- Author(s)
  H.Fujimoto, Y.Shiotani, A.Tong, T.Hama, H.Takuda
- Journal Title
  
  International Journal of Multiphase Flow 33
  
  Pages: 317-332
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Numerical study of the collision dynamics and heat transfer of water droplets impinging on a hot solid2007
- Author(s)
  T.Minamikawa, H.Fujmoto, T.Hama, H.Takuda
- Journal Title
  
  ISIJ International 47
  
  Pages: 131-137
- NAID
  10027021141
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Numerical and experimental study on oblique collision of water droplet with a solid substrate2005
- Author(s)
  H.Fujimoto, H.Takuda et al.
- Journal Title
  
  Proceedings of ASME IMECE2005, November, Orlando, FL IMECE2005-80338
  
  Pages: 1-7
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Entrapment of air at 45 degrees oblique collision of a water drop with a smooth solid surface at room temperature2004
- Author(s)
  H.Fujimoto, H.Takuda
- Journal Title
  
  International Journal of Heat Mass Transfer 47
  
  Pages: 3301-3305
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Deformation behavior of high strength steel sheet during roll forming of electric resistance welded pipe
- Author(s)
  Iguchi K., Kuriyama Y., Moroi N., Hama T., and Takuda H.
- Journal Title
  
  Steel Research International
  
  Volume: Special Edition Pages: 927-930
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] 種々の比例および非比例負荷経路における6022-T4アルミニウム合金板の塑性流動　－第一報－　二軸引張試験2019
- Author(s)
  浜孝之，八木翔吾，前田康裕，前田恭志，藤本仁，宅田裕彦
- Organizer
  2019年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 種々の比例および非比例負荷経路における6022-T4アルミニウム合金板の塑性流動―第2報　結晶塑性解析―2019
- Author(s)
  浜孝之，八木翔吾，前田康裕，前田恭志，宅田裕彦
- Organizer
  第70回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 結晶塑性解析による冷延鋼板の加工硬化特性の予測2019
- Author(s)
  浜孝之，宅田裕彦
- Organizer
  日本鉄鋼協会第177回春季講演大会　シンポジウム「鋼板材料モデリングのシンポと課題」
- Invited
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 結晶塑性有限要素法による純チタン板の円筒深絞り成形シミュレーション2019
- Author(s)
  浜孝之，松浦遼，平野夏帆，内田壮平，宅田裕彦
- Organizer
  日本機械学会M&M2019カンファレンス
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 種々の比例および非比例負荷経路における6022-T4アルミニウム合金板の塑性流動―第2報　結晶塑性解析―2019
- Author(s)
  浜孝之，八木翔吾，前田康裕，前田恭志，宅田裕彦
- Organizer
  第70回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 種々の比例および非比例負荷経路における6022-T4アルミニウム合金板の塑性流動　－第一報－　二軸引張試験2019
- Author(s)
  浜孝之，八木翔吾，前田康裕，前田恭志，藤本仁，宅田裕彦
- Organizer
  2019年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] Crystal plasticity finite-element simulation of deep drawing of commercially-pure titanium sheet2019
- Author(s)
  Hama, T., Hirano, K., Matsuura, R., Korkolis, Y.P., and Takuda, H.
- Organizer
  the 13th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 種々の時効処理を施したTi153βチタン合金板における準静的変形挙動2019
- Author(s)
  浜孝之，畠山健太郎，中辻雄也，宅田裕彦
- Organizer
  第70回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 結晶塑性有限要素法による純チタン板の円筒深絞り成形シミュレーション2019
- Author(s)
  浜孝之，松浦遼，平野夏帆，内田壮平，宅田裕彦
- Organizer
  日本機械学会M&M2019カンファレンス
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] Crystal plasticity finite-element simulation of deep drawing of commercially-pure titanium sheet2019
- Author(s)
  Hama, T., Hirano, K., Matsuura, R., Korkolis, Y.P., and Takuda, H.
- Organizer
  the 13th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 結晶塑性解析による冷延鋼板の加工硬化特性の予測2019
- Author(s)
  浜孝之，宅田裕彦
- Organizer
  日本鉄鋼協会第177回春季講演大会　シンポジウム「鋼板材料モデリングの進歩と課題」
- Invited
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 純チタン2種板の円筒深絞り成形に関する結晶塑性有限要素解析とその実験検証2019
- Author(s)
  浜孝之，松浦遼，平野夏帆，内田壮平，藤本仁，宅田裕彦
- Organizer
  2019度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 種々の時効処理を施したTi153βチタン合金板における準静的変形挙動2019
- Author(s)
  浜孝之，畠山健太郎，中辻雄也，宅田裕彦
- Organizer
  第70回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 結晶塑性解析による冷延鋼板の加工硬化特性の予測2019
- Author(s)
  浜孝之，宅田裕彦
- Organizer
  日本鉄鋼協会第177回春季講演大会　シンポジウム「鋼板材料モデリングの進歩と課題」
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 結晶塑性解析による冷延鋼板の加工硬化特性の予測2019
- Author(s)
  浜孝之，宅田裕彦
- Organizer
  日本鉄鋼協会第177回春季講演大会　シンポジウム「鋼板材料モデリングのシンポと課題」
- Invited
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 純チタン2種板の円筒深絞り成形に関する結晶塑性有限要素解析とその実験検証2019
- Author(s)
  浜孝之，松浦遼，平野夏帆，内田壮平，藤本仁，宅田裕彦
- Organizer
  2019度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 少数結晶材の活用による結晶塑性解析の高精度化の可能性2018
- Author(s)
  浜孝之，Pierre Baudoin，宅田裕彦
- Organizer
  日本鉄鋼協会第175回春季講演大会
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 少数結晶材の活用による結晶塑性解析の高精度化の可能性2018
- Author(s)
  浜孝之，Pierre Baudoin，宅田裕彦
- Organizer
  日本鉄鋼協会第175回春季講演大会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] Prediction of differential work-hardening behavior under biaxial tension of steel sheet using crystal plasticity models2018
- Author(s)
  Hama, T., Fujimoto, H., and Takuda, H.
- Organizer
  METALFORMING2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 粗大結晶粒純チタン板の不均一変形挙動とその結晶塑性解析2018
- Author(s)
  Pierre Baudoin，浜孝之，内田壮平，宅田裕彦
- Organizer
  平成30年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 異なる双晶活動を示す2種類の純チタン板における2段階変形挙動2018
- Author(s)
  浜孝之，月原啓志，畠山真一，内田壮平，藤本仁，宅田裕彦
- Organizer
  第69回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 少数結晶材の活用による結晶塑性解析の高精度化の可能性2018
- Author(s)
  浜孝之，Pierre Baudoin，宅田裕彦
- Organizer
  日本鉄鋼協会　第175回春季講演大会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 粗大結晶粒純チタン材の不均一変形挙動に及ぼすCRSS比の影響2018
- Author(s)
  Pierre Baudoin，浜孝之，内田壮平，宅田裕彦
- Organizer
  日本機械学会M&M2018カンファレンス
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] Crystal-plasticity finite-element simulation of time-dependent springback in a commercially-pure titanium sheet2018
- Author(s)
  Hama, T., Sakai, T., Korkolis, Y.P., and Takuda, H.
- Organizer
  NUMISHEET 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] Crystal plasticity analysis of the deformation of a grade 2 CP-Ti oligocrystal2018
- Author(s)
  Baudoin, P., Hama, T., Uchida, S., and Takuda, H.,
- Organizer
  NUMISHEET 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] Crystal plasticity finite-element analysis of surface roughening behavior in biaxial stretching of steel sheets2018
- Author(s)
  Kubo, M., Hama, T., Tsunemi, Y., Nakazawa, Y., and Takuda, H.
- Organizer
  NUMISHEET 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] Crystal plasticity analysis of the deformation of a grade 2 CP-Ti oligocrystal2018
- Author(s)
  Baudoin, P., Hama, T., Uchida, S., and Takuda, H.
- Organizer
  NUMISHEET 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] Crystal-plasticity finite-element simulation of time-dependent springback in a commerciallypure titanium sheet2018
- Author(s)
  Hama, T., Sakai, T., Korkolis, Y.P., and Takuda, H.
- Organizer
  NUMISHEET 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 異なる双晶活動を示す2種類の純チタン板における2段階変形挙動2018
- Author(s)
  浜孝之，月原啓志，畠山真一，内田壮平，藤本仁，宅田裕彦
- Organizer
  第69回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 粗大結晶粒純チタン材の不均一変形挙動に及ぼすCRSS比の影響2018
- Author(s)
  Pierre Baudoin，浜孝之，内田壮平，宅田裕彦
- Organizer
  日本機械学会M&M2018カンファレンス
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] Prediction of differential work-hardening behavior under biaxial tension of steel sheet using crystal plasticity models2018
- Author(s)
  Hama, T., Fujimoto, H., and Takuda, H.
- Organizer
  METALFORMING 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] Crystal plasticity finite-element analysis of surface roughening behavior in biaxial stretching of steel sheets2018
- Author(s)
  Kubo, M., Hama, T., Tsunemi, Y., Nakazawa, Y., and Takuda, H.
- Organizer
  NUMISHEET 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 結晶塑性解析と単純せん断試験を用いた5000系アルミニウム合金板における大ひずみ域までの加工硬化特性評価2018
- Author(s)
  129)浜孝之，達川昴至，生川遼太，前田康裕，前田恭志，藤本仁，宅田裕彦
- Organizer
  第69回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 粗大結晶粒純チタン板の不均一変形挙動とその結晶塑性解析2018
- Author(s)
  Pierre Baudoin，浜孝之，内田壮平，宅田裕彦
- Organizer
  平成30年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 結晶塑性解析と単純せん断試験を用いた5000系アルミニウム合金板における大ひずみ域までの加工硬化特性評価2018
- Author(s)
  浜孝之，達川昴至，生川遼太，前田康裕，前田恭志，藤本仁，宅田裕彦
- Organizer
  第69回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] Time-dependent springback of a commercially pure titanium sheet2017
- Author(s)
  Hama, T., Sakai, T., Fujisaki, Y., Fujimoto, H., and Takuda, H.
- Organizer
  12th International Conference on Technology of Plasticity
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 二段階負荷を受ける純チタン板の変形挙動に及ぼす双晶活動の影響2017
- Author(s)
  浜孝之，平野夏帆，藤崎悠介，内田壮平，藤本仁，宅田裕彦
- Organizer
  日本機械学会M&M2017カンファレンス
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 種々のひずみ経路における5000系アルミニウム合金板の加工硬化特性2017
- Author(s)
  浜孝之，八木翔吾，生川遼太，前田康裕，前田恭志，藤本仁，宅田裕彦
- Organizer
  第68回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] AN EXPERIMENTAL STUDY OF COLLISION OF DROPS WITH A HOT SOLID BY MEANS OF THREE-DIRECTIONAL FLASH PHOTOGRAPHY2017
- Author(s)
  Hitoshi Fujimoto, Masayoshi Ashida, Shogo Sakane, Takayuki Hama, Hirohiko Takuda
- Organizer
  1st Asian Conference of Thermal Science
- Place of Presentation
  Jedu, South Korea
- Year and Date
  2017-03-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05825
[Presentation] 種々の結晶塑性モデルによる冷延鋼板の等塑性仕事面の予測2017
- Author(s)
  浜孝之，畠山真一，藤本仁，宅田裕彦
- Organizer
  日本鉄鋼協会第173回春季講演大会
- Place of Presentation
  首都大学東京（八王子市）
- Year and Date
  2017-03-15
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 結晶塑性有限要素法による純チタン板の深絞り成形解析2017
- Author(s)
  浜孝之，宅田裕彦
- Organizer
  第68回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 高温固体面とポリマー水溶液液滴の接触挙動に及ぼす衝突速度の影響2017
- Author(s)
  坂根将伍, 藤本仁, 浜孝之, 宅田裕彦
- Organizer
  日本鉄鋼協会秋季講演大会
- Data Source
  KAKENHI-PROJECT-15K05825
[Presentation] 種々の金属板におけるスプリングバック時間依存性2017
- Author(s)
  浜孝之，中辻雄也，鈴木智貴，堺勇行，藤本仁，宅田裕彦
- Organizer
  第68回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 鉄鋼板の応力緩和挙動に関する結晶塑性有限要素法解析2017
- Author(s)
  浜孝之，浦谷政翔，藤本仁，宅田裕彦
- Organizer
  平成29年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 種々のひずみ経路における5000系アルミニウム合金板の加工硬化特性2017
- Author(s)
  浜孝之，八木翔吾，生川遼太，前田康裕，前田恭志，藤本仁，宅田裕彦
- Organizer
  第68回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 種々の結晶塑性モデルによる冷延鋼板の等塑性仕事面の予測2017
- Author(s)
  浜孝之，畠山真一，藤本仁，宅田裕彦
- Organizer
  日本鉄鋼協会第173回春季講演大会
- Place of Presentation
  首都大学東京（八王子市）
- Year and Date
  2017-03-15
- Data Source
  KAKENHI-PROJECT-26420737
[Presentation] 二段階負荷を受ける純チタン板の応力挙動2017
- Author(s)
  浜孝之，平野夏帆，藤崎悠介，内田壮平，藤本仁，宅田裕彦
- Organizer
  第68回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17K06858
[Presentation] 鉄鋼板の応力緩和挙動に関する結晶塑性有限要素法解析2017
- Author(s)
  浜孝之，浦谷政翔，藤本仁，宅田裕彦
- Organizer
  平成29年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 二段階負荷を受ける純チタン板の変形挙動に及ぼす双晶活動の影響2017
- Author(s)
  浜孝之，平野夏帆，藤崎悠介，内田壮平，藤本仁，宅田裕彦
- Organizer
  日本機械学会M&M2017カンファレンス
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 二段階負荷を受ける純チタン板の応力挙動2017
- Author(s)
  浜孝之，平野夏帆，藤崎悠介，内田壮平，藤本仁，宅田裕彦
- Organizer
  第68回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-17H03428
[Presentation] 予圧縮を受けたマグネシウム合金板の引張変形特性に及ぼす双晶の影響2016
- Author(s)
  浜孝之，畠山真一，鈴木智貴，内田壮平，藤本仁，宅田裕彦
- Organizer
  日本塑性加工学会平成28年度塑性加工春季講演会
- Place of Presentation
  京都工芸繊維大学（京都市）
- Year and Date
  2016-05-20
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 純チタン板の変形異方性に関する結晶塑性有限要素解析2016
- Author(s)
  浜孝之，小吹晃弘，Ning Yi，藤本仁，宅田裕彦
- Organizer
  日本塑性加工学会平成28年度塑性加工春季講演会
- Place of Presentation
  京都工芸繊維大学（京都市）
- Year and Date
  2016-05-20
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 種々の負荷経路における純チタン板の変形挙動に関する結晶塑性解析2016
- Author(s)
  浜孝之，小吹晃弘，内田壮平，藤本仁，宅田裕彦
- Organizer
  日本機械学会M&M2016カンファレンス
- Place of Presentation
  神戸大学（神戸市）
- Year and Date
  2016-10-08
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 種々の方向へ引張・圧縮予変形を受けたIF・DP鋼板の引張特性2016
- Author(s)
  割鞘美和，生川遼太，浜孝之，宅田裕彦，和田学，樋渡俊二
- Organizer
  日本塑性加工学会平成28年度塑性加工春季講演会
- Place of Presentation
  京都工芸繊維大学（京都市）
- Year and Date
  2016-05-20
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 予圧縮を受けたマグネシウム合金板における引張変形時の応力挙動2016
- Author(s)
  浜孝之，畠山真一，鈴木智貴，内田壮平，藤本仁，宅田裕彦
- Organizer
  日本機械学会第24回機械材料・材料加工技術講演会
- Place of Presentation
  早稲田大学（新宿区）
- Year and Date
  2016-11-24
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 反転負荷を受ける純チタン板における加工硬化挙動2016
- Author(s)
  浜孝之，小吹晃弘，藤本仁，宅田裕彦
- Organizer
  日本塑性加工学会第67回塑性加工連合講演会
- Place of Presentation
  日本工業大学（宮代町）
- Year and Date
  2016-10-21
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 水溶性ポリマー液と加熱固体面の接触による皮膜形成素過程2016
- Author(s)
  坂根将伍，藤本仁，浜孝之，宅田裕彦
- Organizer
  日本鉄鋼協会秋季講演大会
- Place of Presentation
  大阪大学豊中キャンパス
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-15K05825
[Presentation] 結晶塑性解析による体心立方金属の変形挙動予測2016
- Author(s)
  浜孝之，小嶋慶典，久保雅寛，常見祐介，藤本仁，宅田裕彦
- Organizer
  日本鉄鋼協会第171回春季講演大会
- Place of Presentation
  東京理科大学　葛飾キャンパス（東京都葛飾区）
- Year and Date
  2016-03-23
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 純チタン板におけるスプリングバックの時間依存性2016
- Author(s)
  浜孝之，堺勇行，藤崎悠介，藤本仁，宅田裕彦
- Organizer
  日本塑性加工学会平成28年度塑性加工春季講演会
- Place of Presentation
  京都工芸繊維大学（京都市）
- Year and Date
  2016-05-20
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] In-situ observation of microstructure variations under biaxial tensile state of steel sheets2016
- Author(s)
  Kubo, M., Yohida, H., Uenishi, A., Nakazawa, Y., Hama, T., and Takuda, H.
- Organizer
  International symposium of Plasticity 2016
- Place of Presentation
  Big Iland市，アメリカ合衆国
- Year and Date
  2016-01-03
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 種々の方向へ引張・圧縮予変形を受けたIF・DP鋼板の引張特性2016
- Author(s)
  割鞘美和，生川遼太，浜孝之，宅田裕彦，和田学，樋渡俊二
- Organizer
  平成28年度塑性加工春季講演会
- Place of Presentation
  京都工芸繊維大学（京都市）
- Year and Date
  2016-05-20
- Data Source
  KAKENHI-PROJECT-26420737
[Presentation] 種々の金属板における除荷時の変形特性2015
- Author(s)
  浜孝之，口ノ町陽太，藤本仁，宅田裕彦
- Organizer
  日本塑性加工学会平成27年度塑性加工春季講演会
- Place of Presentation
  慶應義塾大学　矢上キャンパス（神奈川県横浜市）
- Year and Date
  2015-06-06
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] マグネシウム合金圧延板における双晶活動の板厚ひずみに及ぼす影響2015
- Author(s)
  浜孝之、鈴木智貴、内田壮平、田中努、藤本仁、宅田裕彦
- Organizer
  日本機械学会M&M2015材料力学カンファレンス
- Place of Presentation
  慶應義塾大学　矢上キャンパス（神奈川県横浜市）
- Year and Date
  2015-11-21
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 予圧縮を受けたマグネシウム合金板におけるひずみ挙動に関する結晶塑性解析2015
- Author(s)
  浜孝之、宅田裕彦
- Organizer
  日本塑性加工学会第66回塑性加工連合講演会
- Place of Presentation
  いわき市文化センター（福島県いわき市）
- Year and Date
  2015-10-29
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 純チタン板のスプリングバックに及ぼすひずみ速度の影響2015
- Author(s)
  浜孝之、藤崎悠介、口ノ町陽太、藤本仁、宅田裕彦
- Organizer
  日本塑性加工学会第66回塑性加工連合講演会
- Place of Presentation
  いわき市文化センター（福島県いわき市）
- Year and Date
  2015-10-29
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 反転負荷を受けるマグネシウム合金圧延板におけるひずみ挙動2015
- Author(s)
  浜孝之、鈴木智貴、浦谷政翔、内田壮平、田中努、藤本仁、宅田裕彦
- Organizer
  日本塑性加工学会第66回塑性加工連合講演会
- Place of Presentation
  いわき市文化センター（福島県いわき市）
- Year and Date
  2015-10-29
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 高温固体面に衝突する水溶性ポリマー液滴の沸騰現象と皮膜形成2015
- Author(s)
  濱野顕太郎,藤本仁,浜孝之,宅田裕彦,岡本隆彦
- Organizer
  日本鉄鋼協会秋季講演大会
- Place of Presentation
  九州大学伊都キャンパス
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-15K05825
[Presentation] Impact phenomena of drops of aqueous polymer solution on hot solid2015
- Author(s)
  Hitoshi Fujimoto, Kentaro Hamano, Takayuki Hama, Hirohiko Takuda
- Organizer
  10th Pacific Symposium on Flow Visualization and Image Processing
- Place of Presentation
  Naples, Italy
- Year and Date
  2015-06-15
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05825
[Presentation] ロール成形プロセスにおける次スタンド拘束の影響―電縫鋼管のロール成形シミュレーション(第10報)2013
- Author(s)
  井口敬之助, 松井洋介, 浜孝之, 宅田裕彦, 栗山幸久
- Organizer
  平成25年度塑性加工春季講演会講演論文集
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] ロール成形プロセスにおける次スタンド拘束の影響―電縫鋼管のロール成形シミュレーション（第10報）2013
- Author(s)
  井口敬之助，松井洋介，浜孝之，宅田裕彦，栗山幸久
- Organizer
  平成25年度塑性加工春季講演会
- Place of Presentation
  大同大学
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] ロール間隙が板変形挙動に与える影響　-電縫鋼管のロール成形シミュレーション（第9報）-2012
- Author(s)
  井口敬之助，松井洋介，浜孝之，宅田裕彦，栗山幸久
- Organizer
  第63回塑性加工連合講演会
- Place of Presentation
  北九州国際会議場
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] ロール間隙が板変形挙動に与える影響-電縫鋼管のロール成形シミュレーション(第9報)2012
- Author(s)
  井口敬之助, 松井洋介, 浜孝之, 宅田裕彦, 栗山幸久
- Organizer
  第63回塑性加工連合講演会講演論文集
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] ロール成形における板強度の影響-電縫鋼管のロール成形シミュレーション(第8報)2012
- Author(s)
  井口敬之助, 栗山幸久, 師井直紀, 浜孝之, 宅田裕彦
- Organizer
  平成24年度塑性加工春季講演会講演論文集
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] ロール成形における板強度の影響　-電縫鋼管のロール成形シミュレーション（第8報）-2012
- Author(s)
  井口敬之助，栗山幸久，師井直紀，浜孝之，宅田裕彦
- Organizer
  平成24年度塑性加工春季講演会
- Place of Presentation
  コマツウェイ総合研修センター
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] ロール形式が形状凍結性に与える影響（第6報）2011
- Author(s)
  井口敬之助，栗山幸久，師井直紀，浜孝之，宅田裕彦
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  豊橋市
- Year and Date
  2011-10-28
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] ロール成形における形状凍結メカニズムー電縫鋼管のロール成形シミュレーション(第4報)2011
- Author(s)
  井口敬之助, 中村英幸, 栗山幸久, 師井直紀, 浜孝之, 宅田裕彦
- Organizer
  平成23年度塑性加工春季講演会講演論文集
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] ロール成形における形状凍結メカニズム（第4報）2011
- Author(s)
  井口敬之助，中村英幸，栗山幸久，師井直紀，浜孝之，宅田裕彦
- Organizer
  平成23年度塑性加工春季講演会
- Place of Presentation
  東京都
- Year and Date
  2011-05-28
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] ロール成形におけるパスラインの影響―電縫鋼管のロール成形シミュレーション(第5報)2011
- Author(s)
  師井直紀, 浜孝之, 宅田裕彦, 井口敬之助, 中村英幸, 栗山幸久
- Organizer
  平成23年度塑性加工春季講演会講演論文集
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] ロール形式が形状凍結性に与える影響–電縫鋼管のロール成形シミュレーション(第6報)2011
- Author(s)
  井口敬之助, 栗山幸久, 師井直紀, 浜孝之, 宅田裕彦
- Organizer
  第62回塑性加工連合講演会講演論文集
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] 多段のロール成形におけるパスラインの影響–電縫鋼管のロール成形シミュレーション(第7報)2011
- Author(s)
  師井直紀, 浜孝之, 宅田裕彦, 井口敬之助, 栗山幸久
- Organizer
  第62回塑性加工連合講演会講演論文集
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] 段のロール成形におけるパスラインの影響（第7報）2011
- Author(s)
  師井直紀，浜孝之，宅田裕彦，井口敬之助，栗山幸久
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  豊橋市
- Year and Date
  2011-10-28
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] ロール成形におけるパスラインの影響（第5報）2011
- Author(s)
  師井直紀，浜孝之，宅田裕彦，井口敬之助，中村英幸，栗山幸久
- Organizer
  平成23年度塑性加工春季講演会
- Place of Presentation
  東京都
- Year and Date
  2011-05-28
- Data Source
  KAKENHI-PROJECT-23560864
[Presentation] 対向液圧角筒絞り成形における液圧特性2009
- Author(s)
  浜孝之, 北島達, 松嶋啓太, 藤本仁, 宅田裕彦
- Organizer
  日本塑性加工学会平成21年度塑性加工春季講演会
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-05-30
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧角筒絞り成形における液圧特性2009
- Author(s)
  浜孝之, 北島達, 松嶋啓太, 藤本仁, 宅田裕彦
- Organizer
  日本塑性加工学会平成21年度塑性加工春季講演会
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-05-30
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] Outflow characteristics of a pressure medium during square-cup sheet hydroforming2008
- Author(s)
  Takayuki Hama, Ken Kurisu, Keita Matsushima, Hitoshi Fujimoto, Hirohiko Takuda
- Organizer
  The 9th International Conference on Technology of Plasticity (ICTP 2008)
- Place of Presentation
  大韓民国・慶州
- Year and Date
  2008-09-09
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] Outflow characteristics of a pressure medium during square-cup sheet hydroforming2008
- Author(s)
  Takayuki HAMA, Ken KURISU, Keita Matsushima, Hitoshi FUJIMOTO, Hirohiko TAKUDA
- Organizer
  The 9th International Conference on Technology of Plasticity (ICTP 2008)
- Place of Presentation
  韓国・慶州
- Year and Date
  2008-09-09
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧成形における液圧分布の測定2007
- Author(s)
  浜孝之, 栗栖憲, 松嶋啓太, 藤本仁, 宅田裕彦
- Organizer
  日本鉄鋼協会第154回秋季講演大会
- Place of Presentation
  岐阜大学
- Year and Date
  2007-09-20
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧成形における液圧分布の測定2007
- Author(s)
  浜孝之, 栗栖憲, 松嶋啓太, 藤本仁, 宅田裕彦
- Organizer
  第154回秋季講演大会(日本鉄鋼協会)
- Place of Presentation
  岐阜大学
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧成形における圧力分布測定法の提案と検証2007
- Author(s)
  浜孝之, 松嶋啓太, 栗栖憲, 藤本仁, 宅田裕彦
- Organizer
  第58回塑性加工連合講演会(日本塑性加工学会)
- Place of Presentation
  札幌市教育文化会館
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧角筒絞り成形における圧力媒体流出特性2007
- Author(s)
  浜孝之, 松嶋啓太, 栗栖憲, 藤本仁, 宅田裕彦
- Organizer
  第58回塑性加工連合講演会(日本塑性加工学会)
- Place of Presentation
  札幌市教育文化会館
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧角筒絞り成形における圧力媒体流出特性2007
- Author(s)
  浜孝之, 松嶋啓太, 栗栖憲, 藤本仁, 宅田裕彦
- Organizer
  日本塑性加工学会第58回塑性加工連合講演会
- Place of Presentation
  札幌市教育文化会館
- Year and Date
  2007-10-26
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧成形における圧力分布測定法の提案と検証2007
- Author(s)
  浜孝之, 松嶋啓太, 栗栖憲, 藤本仁, 宅田裕彦
- Organizer
  日本塑性加工学会第58回塑性加工連合講演会
- Place of Presentation
  札幌市教育文化会館
- Year and Date
  2007-10-26
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 単スタンドのロール成形におけるひずみ経路
- Author(s)
  和田学，割鞘美和，浜孝之，宅田裕彦，栗山幸久，樋渡俊二
- Organizer
  第65回塑性加工連合講演会
- Place of Presentation
  岡山市
- Year and Date
  2014-10-11 – 2014-10-13
- Data Source
  KAKENHI-PROJECT-26420737
[Presentation] Deformation behavior during two-stage loading in a Magnesium alloy sheet
- Author(s)
  Takayuki Hama, and Hirohiko Takuda
- Organizer
  International symposium on Plasticity 2015
- Place of Presentation
  ジャマイカ，モンテゴベイ
- Year and Date
  2015-01-04 – 2015-01-09
- Invited
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] マグネシウム合金圧延板の交差効果に関する結晶塑性有限要素解析
- Author(s)
  浜孝之，浦谷政翔，田中悠貴，田中努，西村崇，藤本仁，宅田裕彦
- Organizer
  第65回塑性加工連合講演会
- Place of Presentation
  岡山市
- Year and Date
  2014-10-11 – 2014-10-13
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 反転負荷を受ける純チタン板における双晶活動
- Author(s)
  浜孝之，長尾洋孝，小吹晃弘，田中努，西村崇，藤本仁，宅田裕彦
- Organizer
  日本機械学会M&M2014材料力学カンファレンス
- Place of Presentation
  福島市
- Year and Date
  2014-07-19 – 2014-07-21
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 種々の負荷経路における純チタン板の変形挙動
- Author(s)
  浜孝之，小吹晃弘，長尾洋孝，田中努，西村崇，藤本仁，宅田裕彦
- Organizer
  第65回塑性加工連合講演会
- Place of Presentation
  岡山市
- Year and Date
  2014-10-11 – 2014-10-13
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 圧縮予ひずみを受けたマグネシウム合金圧延板の変形挙動
- Author(s)
  浜孝之，田中悠貴，浦谷政翔，田中努，西村崇，藤本仁，宅田裕彦
- Organizer
  日本機械学会M&M2014材料力学カンファレンス
- Place of Presentation
  福島市
- Year and Date
  2014-07-19 – 2014-07-21
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 圧縮予ひずみを受けるマグネシウム合金圧延板における交差効果
- Author(s)
  浜孝之，浦谷政翔，田中悠貴，田中努，西村崇，藤本仁，宅田裕彦
- Organizer
  平成26年度塑性加工春季講演会
- Place of Presentation
  つくば市
- Year and Date
  2014-06-06 – 2014-06-08
- Data Source
  KAKENHI-PROJECT-26289271
[Presentation] 結晶塑性有限要素法によるマグネシウム合金板の変形解析に及ぼす潜在硬化の影響
- Author(s)
  浜孝之，宅田裕彦
- Organizer
  第65回塑性加工連合講演会
- Place of Presentation
  岡山市
- Year and Date
  2014-10-11 – 2014-10-13
- Data Source
  KAKENHI-PROJECT-26289271

1. FUJIMOTO Hitoshi (40229050)

# of Collaborated Projects: 12 results

# of Collaborated Products: 29 results
2. HATTA Natsuo (30026041)

# of Collaborated Projects: 10 results

# of Collaborated Products: 0 results
3. HAMA Takayuki (10386633)

# of Collaborated Projects: 6 results

# of Collaborated Products: 130 results
4. ISHII Ryuji (20026339)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
5. 高村正人 (00525595)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
6. UMEDA Yoshikuni (30026132)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. KOYANAKA Hideki (40248620)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. MORI Ken-ichiro (80127167)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. MAKI Seijiro (20124315)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. OTSU Masaaki (20304032)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. ABE Yohei (60402658)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. KOKADO Jun-ichi (30025788)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. 袴田昌高 (30462849)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. SORIMACHI Ken-ichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. TAKATANI Kouji

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. MAYAMA Tsuyoshi

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

Takuda Hirohiko 宅田 裕彦

TAKUDA Hirohiko 宅田 裕彦

Research Projects

Research Products

Co-Researchers

Investigation of multiscale deformation behavior of metals using crystal-plasticity modeling and digital-image correlation measurementsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Prediction of formability of electric resistance welded high-strength steel tubes on basis of accurate evaluation of work-hardening behaviorPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Roll forming of electric resistance welded pipes with high ductilityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Outflow characteristics of a pressure medium during sheet hydroforming and its finite element modelingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Formability of special steel sheets of high quality and its predictionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

板材成形における成形限界予測への延性破壊条件式の適用Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Takuda Hirohiko 宅田裕彦

TAKUDA Hirohiko 宅田裕彦