• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Hirata Tomotake  平田 智丈

ORCIDConnect your ORCID iD *help
… Alternative Names

平田 智丈  ヒラタ トモタケ

HIRATA Tomotake  平田 智丈

Less
Researcher Number 20359433
Affiliation (Current) 2025: 地方独立行政法人大阪産業技術研究所, 和泉センター, 主幹研究員
2025: 地方独立行政法人大阪府立産業技術総合研究所, その他部局等, 主任研究員
Affiliation (based on the past Project Information) *help 2021 – 2022: 地方独立行政法人大阪産業技術研究所, 和泉センター, 主幹研究員
2020: 地方独立行政法人大阪産業技術研究所, 和泉センター, 主任研究員
2017 – 2018: 地方独立行政法人大阪産業技術研究所, 和泉センター, 主任研究員
2016: 地方独立行政法人大阪府立産業技術総合研究所, その他部局等, 主任研究員
2010: Industrial Research Institute of Osaka Prefecture, 機械金属部, 主任研究員
2008 – 2010: Industrial Research Institute of Osaka Prefecture, 機械金属部, 研究員
Review Section/Research Field
Principal Investigator
Basic Section 26050:Material processing and microstructure control-related / Material processing/Microstructural control engineering / Material processing/treatments
Keywords
Principal Investigator
レーザ / アルミニウム合金 / 表面硬化処理 / 高速 / 鋼 / 熱処理 / 浸炭 / 金属粉末 / 破断面解析 / 金属積層造形 … More / アルミニウム / 熱間等方加圧処理(HIP) / 積層造形(AM) / 熱間等方加圧(HIP) / 空隙 / 微小欠陥 / 金属疲労 / 積層造形 / マグネシウム合金 / 動的再結晶 / 微細ナノ粒子 / 異常粒成長 / 結晶粒径 / 摩擦攪拌接合 / 粒界性格分布 / 結晶・組織制御 Less
  • Research Projects

    (3 results)
  • Research Products

    (27 results)
  • Co-Researchers

    (11 People)
  •  Establishment of ultra-high-speed carburizing technology using plastic containers to reduce environmental impactPrincipal Investigator

    • Principal Investigator
      Hirata Tomotake
    • Project Period (FY)
      2020 – 2022
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 26050:Material processing and microstructure control-related
    • Research Institution
      Osaka Research Institute of Industrial Science and Technology
  •  Construction of fatigue design policy based on quantitative analysis of small defects for selective laser meltingPrincipal Investigator

    • Principal Investigator
      HIRATA Tomotake
    • Project Period (FY)
      2016 – 2018
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Material processing/Microstructural control engineering
    • Research Institution
      Osaka Research Institute of Industrial Science and Technology
  •  Analysis of effects of fine nanoparticles and grain boundary character distribution on abnormal grain growth in friction stir welded materialPrincipal Investigator

    • Principal Investigator
      HIRATA Tomotake
    • Project Period (FY)
      2008 – 2010
    • Research Category
      Grant-in-Aid for Young Scientists (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Industrial Research Institute of Osaka Prefecture

All 2022 2021 2020 2019 2018 2017 2016 2011 2010 2009 2008

All Journal Article Presentation

  • [Journal Article] Surface modification by high-speed laser gas carburization in low-alloy steel2020

    • Author(s)
      T. Hirata, T. Yamaguchi, Y. Yokoyama and H. Hoshino
    • Journal Title

      Materials Letters

      Volume: 280 Pages: 128586-128586

    • DOI

      10.1016/j.matlet.2020.128586

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20K05177
  • [Journal Article] Effect of Hot Isostatic Pressing on Al-10%Si-0.4%Mg Alloy Fabricated by Selective Laser Melting2019

    • Author(s)
      平田智丈、木村貴広、中本貴之
    • Journal Title

      Journal of the Japan Society of Powder and Powder Metallurgy

      Volume: 66 Issue: 1 Pages: 29-36

    • DOI

      10.2497/jjspm.66.29

    • NAID

      130007585251

    • ISSN
      0532-8799, 1880-9014
    • Year and Date
      2019-01-15
    • Language
      Japanese
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-16K06808
  • [Journal Article] 破断面解析を活用したレーザー積層造形技術の高度化2018

    • Author(s)
      平田智丈
    • Journal Title

      大阪技術研テクノレポート

      Volume: 平成30年度 Pages: 15-15

    • Open Access
    • Data Source
      KAKENHI-PROJECT-16K06808
  • [Journal Article] Influences of alloying elements on grain sizes in friction stir processed aluminum and aluminum alloys2011

    • Author(s)
      平田智丈、森重大樹、辻川正人、東健司
    • Journal Title

      Proceedings of TMS 2011 annual meeting

      Volume: (CD-ROM)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Journal Article] Effect of Mg content on the minimum grain size of Al? Mg alloys obtained by friction stir processing.2011

    • Author(s)
      森重大樹、平田智丈、上杉徳照、瀧川順庸、辻川正人、東健司
    • Journal Title

      Scripta Materialia 64

      Pages: 355-358

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Journal Article] Effect of Mg content on the minimum grain size of Al-Mg alloys obtained by friction stir processing2011

    • Author(s)
      森重大樹、平田智丈、上杉徳照、瀧川順庸、辻川正人、東健司
    • Journal Title

      Scripta Materialia

      Volume: 64 Pages: 355-358

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Journal Article] Influences of alloying elements on grain sizes in friction stir processed aluminum and aluminum alloys.2011

    • Author(s)
      平田智丈、森重大樹、辻川正人、東健司
    • Journal Title

      Proceedings of TMS 2011 annual meeting CD-ROM

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Journal Article] Comprehensive analysis of minimum grain size in pure aluminum using friction stir processing.2010

    • Author(s)
      森重大樹、平田智丈、辻川正人、東健司
    • Journal Title

      Materials Letters 64

      Pages: 1905-1908

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Journal Article] Comprehensive analysis of minimum grain size in pure aluminum using friction stir processing2010

    • Author(s)
      森重大樹、平田智丈、辻川正人、東健司
    • Journal Title

      Materials.Letters

      Volume: 64 Pages: 1905-1908

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Presentation] レーザを利用したプラスチック容器内で実現可能な超高速浸炭技術2022

    • Author(s)
      平田智丈、山口拓人、横山雄二郎、星野英光
    • Organizer
      日本熱処理技術協会 第45回 西部支部年次大会
    • Data Source
      KAKENHI-PROJECT-20K05177
  • [Presentation] レーザを利用したプラスチック容器内で実現可能な超高速浸炭技術2021

    • Author(s)
      平田智丈、山口拓人、横山雄二郎、星野英光
    • Organizer
      西部金属熱処理工業協同組合 令和3年度 第1回技術講習会
    • Data Source
      KAKENHI-PROJECT-20K05177
  • [Presentation] プラスチック容器で超高速浸炭を実現2021

    • Author(s)
      平田智丈、山口拓人、横山雄二郎、星野英光
    • Organizer
      MOBIO産学連携オフィス テーマ別合同シーズ発表会
    • Data Source
      KAKENHI-PROJECT-20K05177
  • [Presentation] プラスチック容器で超高速浸炭を実現2020

    • Author(s)
      平田智丈、山口拓人、横山雄二郎、星野英光
    • Organizer
      ORIST 技術シーズ・成果発表会
    • Data Source
      KAKENHI-PROJECT-20K05177
  • [Presentation] Changes in microstructures and mechanical properties of selective laser melted Al-10%Si-0.4%Mg alloy after hot isostatic pressing2019

    • Author(s)
      T. Hirata, T. Kimura, T. Nakamoto
    • Organizer
      5th International Conference on Powder Metallurgy in Asia(APMA2019)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K06808
  • [Presentation] レーザ積層造形法により作製した空隙率の異なるAl-10%Si-0.4Mg合金の疲労特性評価2019

    • Author(s)
      平田智丈、木村貴広、中本貴之
    • Organizer
      軽金属学会 第136回春期大会
    • Data Source
      KAKENHI-PROJECT-16K06808
  • [Presentation] フラクトグラフィを活用した金属積層造形技術の高度化2018

    • Author(s)
      平田智丈、木村貴広、中本貴之
    • Organizer
      OROST技術シーズ・成果発表会
    • Data Source
      KAKENHI-PROJECT-16K06808
  • [Presentation] 空隙率の異なるAl-10%Si-0.4%Mgレーザ積層造形体における熱間等方加圧処理の効果2018

    • Author(s)
      平田智丈、木村貴広、中本貴之
    • Organizer
      粉体粉末冶金協会 平成30年度秋季大会
    • Data Source
      KAKENHI-PROJECT-16K06808
  • [Presentation] 熱間等方加圧処理を施したAl-10%Si-0.4%Mgレーザ積層造形体のミクロ組織と機械的性質2018

    • Author(s)
      平田智丈、木村貴広、根津将之、中本貴之
    • Organizer
      粉体粉末冶金協会 平成30年度秋季大会
    • Data Source
      KAKENHI-PROJECT-16K06808
  • [Presentation] レーザ積層造形法により作製したAl-10%Si-0.4%Mg合金の疲労挙動に影響を及ぼす諸因子の検討2017

    • Author(s)
      平田智丈、木村貴広、田中努、中本貴之
    • Organizer
      第68回塑性加工連合講演会
    • Data Source
      KAKENHI-PROJECT-16K06808
  • [Presentation] レーザ積層造形法により作製したAl-10%Si-0.4%Mg合金の疲労特性に及ぼす内部欠陥の影響2016

    • Author(s)
      平田智丈、木村貴広、中本貴之
    • Organizer
      軽金属学会春期大会
    • Place of Presentation
      大阪大学吹田キャンパス
    • Year and Date
      2016-05-28
    • Data Source
      KAKENHI-PROJECT-16K06808
  • [Presentation] Influences of alloying elements on grain sizes in friction stir processed pure aluminum and aluminum alloys2011

    • Author(s)
      平田智丈、森重大樹、辻川正人、東健司
    • Organizer
      TMS 2011 140^<th> annual meeting
    • Place of Presentation
      サンディエゴ コンベンション センター(アメリカ)
    • Year and Date
      2011-03-01
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Presentation] Influences of alloying elements on grain sizes in friction stir processed pure aluminum and aluminum alloys2011

    • Author(s)
      平田智丈、森重大樹、辻川正人、東健司
    • Organizer
      TMS 2011 140^<th> annual meeting
    • Place of Presentation
      サンディエゴ コンベンションセンター(アメリカ)
    • Year and Date
      2011-03-01
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Presentation] 強ひずみ加工を施した純アルミニウムの結晶粒径に及ぼす純度の影響2011

    • Author(s)
      平田智丈、森重大樹、上杉徳照、瀧川順庸、辻川正人、東健司
    • Organizer
      軽金属学会春期大会
    • Place of Presentation
      名古屋大学
    • Year and Date
      2011-05-22
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Presentation] 超高純度アルミニウムの摩擦攪拌接合部における組織的特徴2009

    • Author(s)
      平田智丈
    • Organizer
      平成21年度溶接学会秋季大会
    • Place of Presentation
      徳島大学工学部
    • Year and Date
      2009-09-11
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Presentation] 超高純度アルミニウムの摩擦攪拌接合部における組織的特徴2009

    • Author(s)
      平田智丈、森重大樹、田中努
    • Organizer
      溶接学会秋季大会
    • Place of Presentation
      徳島大学工学部
    • Year and Date
      2009-09-11
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Presentation] 摩擦攪拌技術を利用したものづくり2008

    • Author(s)
      平田智丈
    • Organizer
      産学官連携推進大会2008
    • Place of Presentation
      大阪国際会議場
    • Year and Date
      2008-07-09
    • Data Source
      KAKENHI-PROJECT-20760502
  • [Presentation] 5052アルミニウム合金とAZ31マグネシウム合金の摩擦点接合2008

    • Author(s)
      平田智丈
    • Organizer
      軽金属学会秋季大会
    • Place of Presentation
      工学院大学新宿キャンパス
    • Year and Date
      2008-11-15
    • Data Source
      KAKENHI-PROJECT-20760502
  • 1.  TANAKA Tsutomu (90416248)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 1 results
  • 2.  MORISHIGE Taiki (30530076)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 10 results
  • 3.  HIGASHI Kenji (50173133)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 9 results
  • 4.  TSUJIKAWA Masato (90172006)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 9 results
  • 5.  TAKIGAWA Yorinobu (70382231)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 3 results
  • 6.  UESUGI Tokuteru (10405342)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 3 results
  • 7.  中本 貴之 (40393300)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 7 results
  • 8.  木村 貴広 (50712907)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 6 results
  • 9.  山口 拓人 (20530041)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 5 results
  • 10.  横山 雄二郎 (30359418)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 4 results
  • 11.  星野 英光 (60359396)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 4 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi