Kobayashi Junya 小林純也

… Alternative Names

小林純也コバヤシジュンヤ

Less

Researcher Number	20735104
Other IDs
Affiliation (Current)	2025: 茨城大学, 応用理工学野, 准教授
Affiliation (based on the past Project Information) *help	2021 – 2023: 茨城大学, 理工学研究科(工学野), 講師 2018 – 2021: 茨城大学, 理工学研究科(工学野), 助教 2014 – 2017: 茨城大学, 工学部, 助教
Review Section/Research Field	Except Principal Investigator Basic Section 26020:Inorganic materials and properties-related / Basic Section 26040:Structural materials and functional materials-related / Structural/Functional materials / Material processing/Microstructural control engineering / Science education
Keywords	Except Principal Investigator アルミニウム合金 / 粒界 / クリープ / 透明体 / セラミックス / 酸化物セラミックス / フラッシュ現象 / 金属/セラミックス接合 / 蛍光体 / 透明セラミックス … More / 接合 / 変形 / 焼結 / 通電効果 / 弾性反跳粒子検出 / 金属材料 / 水素化チタン / 水素化アルミニウム / 弾性反跳粒子検出法 / 2相ステンレス鋼 / 水素マイクロプリント / すべり帯 / 変形帯 / 水素誘起欠陥 / 塑性変形 / 純鉄 / トリチウムオートラジオグラフィ / 可視化 / 水素 / 構造・機能材料 / 強度・破壊靭性 / 組織制御 / 析出 / 無析出帯 / 水素脆化 / 焼入れ / 粒界析出 / ひずみ誘起粒界移動 / ステップクェンチ処理 / 粒界形状制御 / 析出組織制御 / 結晶粒界 / 析出強化 / 応力腐食割れ / 強度 / 水素脆性 / 粒内 / 時効析出 / 7000系アルミニウム合金 / 工学教育 / ものづくり / 大学生 / 児童 / 創造教育 Less

Analysis on the sites of existence and paths of migration for hydrogen in metallic materials for structural use by means of some visualization techniques
- Principal Investigator
  
  Itoh Goroh
- Project Period (FY)
  2020 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Ibaraki University
セラミックスの高温変形及び接合に対する通電効果の原理解明
- Principal Investigator
  
  森田孝治
- Project Period (FY)
  2020 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26020:Inorganic materials and properties-related
- Research Institution
  National Institute for Materials Science
Improvement of reliability of aluminum alloys by controlling the microstructure of grain-boundary precipitates
- Principal Investigator
  
  ITOH Goroh
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Ibaraki University
Suppression of environmental embrittlement in cold worked aluminum alloys with deformation-induced nano clusters
- Principal Investigator
  
  Kuramoto Shigeru
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Ibaraki University
Construction and Implementation of Monozukuri System Combining Physical and Mental Activities for Children
- Principal Investigator
  
  Itoh Nobuhide
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Science education
- Research Institution
  Ibaraki University

All 2024 2023 2022 2021 2020 2019 2018 2017 2015 Other

All Journal Article Presentation

[Journal Article] Visualization of Hydrogen and Hydrogen-induced Defects in Tensile-deformed Pure Iron Using Hydrogen Microprint and Tritium Autoradiography2024
- Author(s)
  Manaka Toshiaki、Itoh Goroh、Kobayashi Junya、Kuramoto Shigeru、Hatano Yuji
- Journal Title
  
  ISIJ International
  
  Volume: 64 Issue: 4 Pages: 655-659
- DOI
  10.2355/isijinternational.ISIJINT-2023-279
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2024-02-28
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K05128
[Journal Article] Effect of Initial Grain Size on Crack Healing Behavior under DC Electric Field of Zirconia (8Y‐CSZ) Ceramic2023
- Author(s)
  Takahashi Shoma、Morita Koji、Nambu Kohta、Terada Daisuke、Kobayashi Kiyoshi、Tokunaga Tomoharu、Yamamoto Takahisa
- Journal Title
  
  Advanced Engineering Materials
  
  Volume: - Issue: 18 Pages: 2201807-2201807
- DOI
  10.1002/adem.202201807
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22KJ2441, KAKENHI-PROJECT-20H02444
[Journal Article] Influence of cold rolling on strength and resistance to hydrogen embrittlement in Al–8%Zn–2%Mg–2%Cu–0.15%Zr alloy2019
- Author(s)
  Tadenuma Hiroki、Kuramoto Shigeru、Kobayashi Junya、Itoh Goroh、Aoi Ichiro、Shimizu Yoshihiro
- Journal Title
  
  Journal of Japan Institute of Light Metals
  
  Volume: 69 Issue: 6 Pages: 312-314
- DOI
  10.2464/jilm.69.312
- NAID
  130007684577
- ISSN
  0451-5994, 1880-8018
- Year and Date
  2019-06-25
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17H03406
[Journal Article] Effect of test environment on tensile properties of cold-rolled 7075 aluminum alloy2018
- Author(s)
  Nakajima Yuki、Kuramoto Shigeru、Kobayashi Junya、Itoh Goroh、Oh-ishi Keiichiro、Aoi Ichiro、Shimizu Yoshihiro
- Journal Title
  
  Journal of Japan Institute of Light Metals
  
  Volume: 68 Issue: 11 Pages: 621-626
- DOI
  10.2464/jilm.68.621
- NAID
  130007543302
- ISSN
  0451-5994, 1880-8018
- Year and Date
  2018-11-30
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] HUMID-GAS STRESS CORROSION CRACKING BEHAVIOR IN SOME MEDIUM-STRENGTH ALUMINUM ALLOYS2022
- Author(s)
  Goroh ITOH, Alireza GHORANI, Akira KURUMADA, Shigeru KURAMOTO, Junya KOBAYASHI and Takeshi OGAWA
- Organizer
  The 18th International Conference on Aluminium Alloys (ICAA18)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] 水素プラズマ照射したAl-Ti合金およびアルミニウムにおける金属水素化物生成2022
- Author(s)
  大内智晴, 伊藤吾朗, 佐藤直幸, 倉本繁, 小林純也
- Organizer
  一般社団法人軽金属学会第142回春期大会
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] 水素プラズマによるアルミニウム水素化物生成に及ぼすプラズマ照射条件の影響2022
- Author(s)
  大内智晴, 伊藤吾朗, 佐藤直幸, 倉本繁, 小林純也
- Organizer
  一般社団法人軽金属学会第143回秋期大会
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] Synthesis of aluminum hydride by hydrogen plasma irradiation2022
- Author(s)
  Tomoharu OUCHI, Goroh ITOH, Naoyuki SATO, Shigeru KURAMOTO and Junya KOBAYASHI
- Organizer
  The 18th International Conference on Aluminium Alloys (ICAA18)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] 水素プラズマ照射したAl-Ti合金およびアルミニウムにおける金属水素化物生成2022
- Author(s)
  大内智晴, 伊藤吾朗, 佐藤直幸, 倉本繁, 小林純也
- Organizer
  軽金属学会第142回春期大会
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] 水素プラズマ照射によるAl-5%Ti合金の水素化物合成2021
- Author(s)
  大内智晴, 伊藤吾朗, 佐藤直幸, 倉本繁, 小林純也
- Organizer
  日本機械学会関東支部・精密工学会・茨城大学工学部共催第29回茨城講演会
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] SQ処理条件制御によるAl-Zn-Mg-Cu合金の耐水素脆化特性改善の試み2020
- Author(s)
  檜山佳祐，伊藤吾朗，小林純也，倉本繁
- Organizer
  一般社団法人軽金属学会第138回春期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Al-Mg-Si系合金の機械的特性に及ぼす冷間圧延の影響2019
- Author(s)
  三浦琢真，倉本繁，伊藤吾朗，小林純也
- Organizer
  軽金属学会第136回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Suppression of environmental hydrogen embrittlement by severe cold rolling in Al-Zn- Mg-Cu-Cr alloy with high amount of zinc2019
- Author(s)
  Mahdieh Safyari， Junya Kobayashi， Shigeru Kuramoto， Goroh Itoh
- Organizer
  軽金属学会第136回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Effect of solution treatment on mechanical properties and hydrogen embrittlement behavior of severely cold-rolled Al-alloys2019
- Author(s)
  Mahdieh Safyari， Junya Kobayashi， Shigeru Kuramoto， Goroh Itoh
- Organizer
  軽金属学会第137回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Mg-Si系合金冷間圧延材の機械的特性に及ぼす合金組成の影響2019
- Author(s)
  三浦琢真，倉本繁，伊藤吾朗，小林純也
- Organizer
  軽金属学会第137回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Cu系合金冷間圧延材の引張特性に及ぼす試験環境の影響2018
- Author(s)
  豊田章嵩，藤澤竜星，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-8%Zn-2%Mg-2%Cu-0.15%Zr合金の耐水素脆化特性に及ぼす冷間圧延の影響2018
- Author(s)
  蓼沼宏樹，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Cu-Mg系合金の耐水素脆化特性に及ぼす冷間圧延の影響2018
- Author(s)
  藤澤竜星，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] 粒界の形状制御による7075アルミニウム合金の粒界割れ抑制2018
- Author(s)
  中島迪久，伊藤吾朗，倉本繁，小林純也
- Organizer
  一般社団法人軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Al-Cu-Mg系合金冷間圧延材の耐水素脆化特性2018
- Author(s)
  藤澤竜星，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] 粒界の形状制御による7075アルミニウム合金の粒界割れ抑制2018
- Author(s)
  中島迪久、伊藤吾朗、倉本繁、小林純也
- Organizer
  軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] 冷間圧延したAl-8%Zn-2%Mg-2%Cu-0.15%Zr合金の耐水素脆性2018
- Author(s)
  蓼沼宏樹，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] 7075アルミニウム合金のSSRT引張特性に及ぼすひずみ誘起粒界移動の影響2018
- Author(s)
  中島迪久，伊藤吾朗，倉本繁，小林純也
- Organizer
  一般社団法人軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Al-8%Zn-2%Mg-2%Cu-0.2%Cr合金の機械的性質と水素脆化感受性に及ぼす強冷間圧延の影響2018
- Author(s)
  サフィヤリマディエ，蓼沼宏樹，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Cu系合金冷間圧延材の耐水素脆化性2018
- Author(s)
  豊田章嵩，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] 冷間圧延したAl-8%Zn-2%Mg-2%Cu-0.15%Zr合金の引張特性2017
- Author(s)
  蓼沼宏樹，中島祐樹，小林純也，倉本繁，伊藤吾朗，青井一郎，清水吉広
- Organizer
  軽金属学会第133回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Cu-Mg系合金冷間圧延材の引張特性に及ぼす圧下率の影響2017
- Author(s)
  藤澤竜星，中島祐樹，小林純也，倉本　繁，伊藤吾朗
- Organizer
  軽金属学会第133回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Zn-Mg合金冷間圧延材の耐水素脆化性に及ぼす加工率の影響2017
- Author(s)
  中島祐樹，小林純也，倉本　繁，伊藤吾朗，青井一郎，清水吉広
- Organizer
  軽金属学会第133回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] 学生が運営するファブラボ鋳造クラブ構想2017
- Author(s)
  益子雄行,伊藤伸英、伊藤吾朗，小林純也
- Organizer
  2017年度　精密工学会春季大会
- Place of Presentation
  慶応義塾大学
- Year and Date
  2017-03-13
- Data Source
  KAKENHI-PROJECT-26350183
[Presentation] 大学生によるものづくり教室の企画と実践　第６報2015
- Author(s)
  伊藤伸英，伊藤吾朗,　小林純也
- Organizer
  2015年度精密工学会秋季大会
- Place of Presentation
  東北大学
- Year and Date
  2015-09-04
- Data Source
  KAKENHI-PROJECT-26350183
[Presentation] 3Dプリンタを用いたものづくり教室の実践
- Author(s)
  小澤右京，伊藤伸英，伊藤吾朗，小林純也
- Organizer
  2015年精密工学会春季大会
- Place of Presentation
  東洋大学
- Year and Date
  2015-03-17 – 2015-03-19
- Data Source
  KAKENHI-PROJECT-26350183
[Presentation] 大学生主催による環境を考えたものづくりシステムの構築
- Author(s)
  大塚明弘，伊藤伸英，伊藤吾朗，小林純也
- Organizer
  2014年精密工学会秋季大会
- Place of Presentation
  鳥取大学
- Year and Date
  2014-09-16 – 2014-09-18
- Data Source
  KAKENHI-PROJECT-26350183

1. ITOH Goroh (80158758)

# of Collaborated Projects: 4 results

# of Collaborated Products: 28 results
2. Kuramoto Shigeru (10292773)

# of Collaborated Projects: 3 results

# of Collaborated Products: 24 results
3. Itoh Nobuhide (70203156)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
4. 岩本知広 (60311635)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 森田孝治 (20354186)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 北薗幸一 (20321573)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 金炳男 (50254149)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Kobayashi Junya 小林 純也

小林 純也 コバヤシ ジュンヤ

Research Projects

Research Products

Co-Researchers

Analysis on the sites of existence and paths of migration for hydrogen in metallic materials for structural use by means of some visualization techniques

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

セラミックスの高温変形及び接合に対する通電効果の原理解明

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Improvement of reliability of aluminum alloys by controlling the microstructure of grain-boundary precipitates

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Suppression of environmental embrittlement in cold worked aluminum alloys with deformation-induced nano clusters

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Construction and Implementation of Monozukuri System Combining Physical and Mental Activities for Children

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Visualization of Hydrogen and Hydrogen-induced Defects in Tensile-deformed Pure Iron Using Hydrogen Microprint and Tritium Autoradiography2024

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] Effect of Initial Grain Size on Crack Healing Behavior under DC Electric Field of Zirconia (8Y‐CSZ) Ceramic2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Influence of cold rolling on strength and resistance to hydrogen embrittlement in Al–8%Zn–2%Mg–2%Cu–0.15%Zr alloy2019

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

[Journal Article] Effect of test environment on tensile properties of cold-rolled 7075 aluminum alloy2018

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

[Presentation] HUMID-GAS STRESS CORROSION CRACKING BEHAVIOR IN SOME MEDIUM-STRENGTH ALUMINUM ALLOYS2022

Author(s)

Organizer

Data Source

[Presentation] 水素プラズマ照射したAl-Ti合金およびアルミニウムにおける金属水素化物生成2022

Author(s)

Organizer

Data Source

[Presentation] 水素プラズマによるアルミニウム水素化物生成に及ぼすプラズマ照射条件の影響2022

Author(s)

Organizer

Data Source

[Presentation] Synthesis of aluminum hydride by hydrogen plasma irradiation2022

Author(s)

Kobayashi Junya 小林純也

小林純也コバヤシジュンヤ