Tsushima Natsuki 津島夏輝

Researcher Number	20815948
Other IDs
Affiliation (Current)	2025: 九州大学, 工学研究院, 准教授 2025: 東京大学, 大学院工学系研究科(工学部), 特任准教授
Affiliation (based on the past Project Information) *help	2019 – 2024: 国立研究開発法人宇宙航空研究開発機構, 航空技術部門, 研究開発員
Review Section/Research Field	Principal Investigator Basic Section 24010:Aerospace engineering-related Except Principal Investigator Sections That Are Subject to Joint Review: Basic Section18030:Design engineering-related , Basic Section18040:Machine elements and tribology-related / Basic Section 18040:Machine elements and tribology-related / Basic Section 18030:Design engineering-related
Keywords	Principal Investigator 空力弾性 / CFD / 風洞試験 / 積層造形 / マルチフィデリティ解析 / パンタグラフ / モーフィング / パンタグラフ構造 / モーフィング翼 / 熱可塑プラスチック … More / 航空構造 / 積層造形技術 / ラティス構造 / マルチスケール解析 / 数値均質化法 / メカニカルメタマテリアル … More Except Principal Investigator メタマテリアル / 粉体ダンパ / 最適設計 / 積層造形 Less

DES空力弾性解析とAM風洞試験法のハイブリッド評価法による遷音速空力弾性現象の解明Principal Investigator
- Principal Investigator
  
  津島夏輝
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 24010:Aerospace engineering-related
- Research Institution
  Japan Aerospace EXploration Agency
状態・形状の同時最適化による多機能防振ラティス構造とマルチスケール最適化での活用
- Principal Investigator
  
  竹澤晃弘
- Project Period (FY)
  2023 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18030:Design engineering-related
  Basic Section 18040:Machine elements and tribology-related
  Sections That Are Subject to Joint Review: Basic Section18030:Design engineering-related , Basic Section18040:Machine elements and tribology-related
- Research Institution
  Waseda University
A Study of the Effects of Microstructure on Mechanical Properties of Mechanical Metamaterials and Its ApplicationPrincipal Investigator
- Principal Investigator
  
  Tsushima Natsuki
- Project Period (FY)
  2019 – 2022
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 24010:Aerospace engineering-related
- Research Institution
  Japan Aerospace EXploration Agency

All 2023 2022 2021 2020 2019

All Journal Article Presentation

[Journal Article] Effects of Process Variables on Mechanical Properties of 3D Printed Materials Fabricated by FDM2022
- Author(s)
  Natsuki Tsushima; Masato Tamayama; Takashi Yamazaki
- Journal Title
  
  JAXA Research and Development Report (RR)
  
  Volume: JAXA-RR-21-005E Pages: 1-12
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19K15216
[Journal Article] Stiffness and strength evaluation of lattice-based mechanical metamaterials by decoupled two-scale analysis2022
- Author(s)
  Tsushima Natsuki、Higuchi Ryo
- Journal Title
  
  Materials Today Communications
  
  Volume: 31 Pages: 103598-103598
- DOI
  10.1016/j.mtcomm.2022.103598
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19K15216
[Journal Article] Geometrically nonlinear flutter analysis with corotational shell finite element analysis and unsteady vortex-lattice method2022
- Author(s)
  Tsushima Natsuki、Arizono Hitoshi、Tamayama Masato
- Journal Title
  
  Journal of Sound and Vibration
  
  Volume: 520 Pages: 116621-116621
- DOI
  10.1016/j.jsv.2021.116621
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19K15216
[Journal Article] Geometrically nonlinear aeroelastic characteristics of highly flexible wing fabricated by additive manufacturing2021
- Author(s)
  Tsushima Natsuki、Tamayama Masato、Arizono Hitoshi、Makihara Kanjuro
- Journal Title
  
  Aerospace Science and Technology
  
  Volume: 117 Pages: 106923-106923
- DOI
  10.1016/j.ast.2021.106923
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K21041, KAKENHI-PROJECT-19K15216
[Journal Article] Structural and Aeroelastic Studies of Wing Model with Metal Additive Manufacturing for Transonic Wind Tunnel Test by NACA 0008 Example2021
- Author(s)
  Tsushima Natsuki、Saitoh Kenichi、Arizono Hitoshi、Nakakita Kazuyuki
- Journal Title
  
  Aerospace
  
  Volume: 8 Issue: 8 Pages: 200-200
- DOI
  10.3390/aerospace8080200
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19K15216
[Journal Article] Structural and aerodynamic characteristics of additively manufactured flexible wings2020
- Author(s)
  TSUSHIMA Natsuki、TAMAYAMA Masato、MAKIHARA Kanjuro、ARIZONO Hitoshi
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 86 Issue: 890 Pages: 19-00452-19-00452
- DOI
  10.1299/transjsme.19-00452
- NAID
  130007930429
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K21041, KAKENHI-PROJECT-19K15216
[Presentation] マルチマテリアル積層造形によるメカニカルメタマテリアルの機械特性制御2023
- Author(s)
  津島夏輝，樋口諒
- Organizer
  第14回日本複合材料会議
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Dispersion Characteristics of Wave Propagation in Lattice-Based Mechanical Metamaterial for Vibration Suppression2023
- Author(s)
  Tsushima, N., Hayashi, Y., Yokozeki, T.
- Organizer
  AIAA SciTech Forum 2023
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Aerospace structures with advanced manufacturing: design and fabrication2023
- Author(s)
  Tsushima Natsuki
- Organizer
  JSPS-DST Japan-India Workshop 2023 Innovative Carbon Fiber Polymer Composite Structures: Material, Design and Application
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] 高速風洞試験のための金属積層造形による翼模型製作法とその空力弾性特性2022
- Author(s)
  津島夏輝．中北和之，齊藤健一
- Organizer
  第60回飛行機シンポジウム
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] メカニカルメタマテリアルによる構造振動抑制効果の予測と評価2022
- Author(s)
  津島夏輝
- Organizer
  第64回構造強度に関する講演会
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] 金属積層造形法による翼模型の遷音速フラッタ特性評価2022
- Author(s)
  津島夏輝，齊藤健一, 中北和之
- Organizer
  第54回流体力学講演会
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Structural and Aeroelastic Studies of Wing Model for Transonic Wind Tunnel Test Fabricated by Additive Manufacturing with AlSi10Mg Alloys2022
- Author(s)
  Tsushima, N., Saitoh, K., Nakakita, K.
- Organizer
  AIAA Aviation Forum 2022
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Finite Element Procedure for Strength Evaluation in Lattice-Based Mechanical Metamaterials2022
- Author(s)
  Tsushima Natsuki、Higuchi Ryo、Arizono Hitoshi
- Organizer
  AIAA SciTech 2022 Forum
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Structural Evaluation in Lattice-Based Mechanical Metamaterials Fabricated by AM for Lightweight Tunable Structures2022
- Author(s)
  Tsushima, N.，Higuchi, R.，Yamamoto, K.，Yokozeki, T.
- Organizer
  15th World Congress on Computational Mechanics (WCCM-XV)/8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] 空力弾性と飛行力学の連成によるモーフィング航空機の縦運動における突風応答解析2022
- Author(s)
  曽根田健輔，津島夏輝
- Organizer
  第64回構造強度に関する講演会
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Multi Scale Aeroelastic Analysis of Wings with Lattice-Based Mechanical Metamaterials2021
- Author(s)
  Natsuki Tsushima, Ryo Higuchi, Hitoshi Arizono, Masato Tamayama
- Organizer
  AIAA Scitech 2021 Forum
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] アルミ合金を用いた金属積層造形による翼模型の遷音速フラッタ風洞試験2021
- Author(s)
  津島夏輝、斎藤健一、中北和之
- Organizer
  第59回飛行機シンポジウム
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] コンフォーマルラティス構造による軽量複合材翼の設計2021
- Author(s)
  津島夏輝、樋口諒、横関智弘、玉山雅人
- Organizer
  第12回日本複合材料会議
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Transonic Flutter Characteristics of Wind Tunnel Model Fabricated by Additive Manufacturing with AlSi10Mg Alloys2021
- Author(s)
  Tsushima Natsuki、Saitoh Kenichi、Nakakita Kazuyuki
- Organizer
  2021 Asia-Pacific International Symposium on Aerospace Technology (APISAT2021)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] 金属積層造形法によるラティス構造の機械的強度特性評価2021
- Author(s)
  津島夏輝、樋口諒、有薗仁、玉山雅人
- Organizer
  第63回構造強度に関する講演会
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Structural and Aeroelastic Evaluations of Wings with Lattice-Based Mechanical Metamaterials2020
- Author(s)
  Natsuki Tsushima, Ryo Higuchi, Hitoshi Arizono, Masato Tamayama
- Organizer
  American Society for Composites 35th Annual Technical Conference
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] 共回転有限要素法と非定常渦格子法に基づくフラッタ解析2020
- Author(s)
  津島夏輝、有薗仁、玉山雅人
- Organizer
  第58回飛行機シンポジウム
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] 金属積層造形による遷音速フラッタ翼模型の構造・フラッタ特性2020
- Author(s)
  津島夏輝、齊藤健一、玉山雅人、中北和之
- Organizer
  第 29 回交通・物流部門大会（TRANSLOG2020）
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Aeroelastic Characteristics of Morphing Wings with Pantographic Substructures2020
- Author(s)
  Natsuki Tsushima, Masato Tamayama, Hitoshi Arizono
- Organizer
  AIAA Scitech 2020 Forum
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Structural and Aerodynamic Models for Aeroelastic Analysis of Corrugated Morphing Wings2020
- Author(s)
  Natsuki Tsushima, Kensuke Soneda, Tomohiro Yokozeki, Taro Imamura, Hitoshi Arizono, Weihua Su
- Organizer
  AIAA Scitech 2020 Forum
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Structural and Flutter Characteristics of Wing Model with Metal Additive Manufacturing for Wind Tunnel Test2020
- Author(s)
  Natsuki Tsushima, Kenichi Saitoh, Hitoshi Arizono, Kazuyuki Nakakita
- Organizer
  Second International Symposium on Flutter and its Application, 2020
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] Aeroelastic Characteristics of Additively Manufactured Wings2020
- Author(s)
  Natsuki Tsushima, Masato Tamayama, Kanjuro Makihara, Hitoshi Arizono
- Organizer
  Second International Symposium on Flutter and its Application, 2020
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] FDM による造形パラメータを考慮した樹脂・複合材積層造形材料の機械特性評価2020
- Author(s)
  津島夏輝、玉山雅人、山崎隆
- Organizer
  第11回日本複合材料会議
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] 均質化法によるラティス構造を有する翼のマルチスケール空力弾性解析2020
- Author(s)
  津島夏輝、樋口諒、有薗仁、玉山雅人
- Organizer
  第62回構造強度に関する講演会
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] 3Dプリンティング翼の空力弾性特性2019
- Author(s)
  津島夏輝、玉山雅人、槙原幹十朗、有薗仁
- Organizer
  第 28 回交通・物流部門大会（TRANSLOG2019）
- Data Source
  KAKENHI-PROJECT-19K15216
[Presentation] パンタグラフ型メカニカルメタマテリアルによるモーフィング翼の空力弾性評価2019
- Author(s)
  津島夏輝、玉山雅人、有薗仁
- Organizer
  第57回飛行機シンポジウム
- Data Source
  KAKENHI-PROJECT-19K15216

1. 竹澤晃弘 (10452608)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
2. 槙原幹十朗

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

Tsushima Natsuki 津島 夏輝

Research Projects

Research Products

Co-Researchers

DES空力弾性解析とAM風洞試験法のハイブリッド評価法による遷音速空力弾性現象の解明Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

状態・形状の同時最適化による多機能防振ラティス構造とマルチスケール最適化での活用

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

A Study of the Effects of Microstructure on Mechanical Properties of Mechanical Metamaterials and Its ApplicationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

[Journal Article] Effects of Process Variables on Mechanical Properties of 3D Printed Materials Fabricated by FDM2022

Author(s)

Journal Title

Data Source

[Journal Article] Stiffness and strength evaluation of lattice-based mechanical metamaterials by decoupled two-scale analysis2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Geometrically nonlinear flutter analysis with corotational shell finite element analysis and unsteady vortex-lattice method2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Geometrically nonlinear aeroelastic characteristics of highly flexible wing fabricated by additive manufacturing2021

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Structural and Aeroelastic Studies of Wing Model with Metal Additive Manufacturing for Transonic Wind Tunnel Test by NACA 0008 Example2021

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Structural and aerodynamic characteristics of additively manufactured flexible wings2020

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Presentation] マルチマテリアル積層造形によるメカニカルメタマテリアルの機械特性制御2023

Author(s)

Organizer

Data Source

[Presentation] Dispersion Characteristics of Wave Propagation in Lattice-Based Mechanical Metamaterial for Vibration Suppression2023

Author(s)

Organizer

Data Source

[Presentation] Aerospace structures with advanced manufacturing: design and fabrication2023

Author(s)

Organizer

Data Source

[Presentation] 高速風洞試験のための金属積層造形による 翼模型製作法とその空力弾性特性2022

Author(s)

Organizer

Data Source

[Presentation] メカニカルメタマテリアルによる 構造振動抑制効果の予測と評価2022

Author(s)

Organizer

Data Source

[Presentation] 金属積層造形法による翼模型の遷音速フラッタ特性評価2022

Author(s)

Organizer

Data Source

[Presentation] Structural and Aeroelastic Studies of Wing Model for Transonic Wind Tunnel Test Fabricated by Additive Manufacturing with AlSi10Mg Alloys2022

Author(s)

Tsushima Natsuki 津島夏輝

[Presentation] 高速風洞試験のための金属積層造形による翼模型製作法とその空力弾性特性2022

[Presentation] メカニカルメタマテリアルによる構造振動抑制効果の予測と評価2022

[Presentation] 空力弾性と飛行力学の連成によるモーフィング航空機の縦運動における突風応答解析2022

[Presentation] 共回転有限要素法と非定常渦格子法に基づくフラッタ解析2020

[Presentation] 金属積層造形による遷音速フラッタ翼模型の構造・フラッタ特性2020

[Presentation] 均質化法によるラティス構造を有する翼のマルチスケール空力弾性解析2020