SAWAKI Yozo 沢木洋三

Researcher Number	30005417
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2001 – 2006: 静岡大学, 工学部, 教授 1990 – 1991: 静岡大学, 工学部, 教授 1987: Faculty of Engineering. Associate Professor, 工学部, 助教授 1986: 東北大, 工学部, 助教授
Review Section/Research Field	Principal Investigator 機械材料工学 / Production engineering/Processing studies / 機械工作・生産工学 Except Principal Investigator 機械材料工学
Keywords	Principal Investigator Gear / Extrusion / Plastic working / 充てん / 断面減少率 / 歯車 / 押出し成形 / 塑性加工 / Silica Glass / Low Temperature … More / Grain Diameter / Cyclic Plastic Zone / Stress Ratio / Fatigue Fracture Toughness / Fatigue / 破壊靭性 / 下限界応力拡大係数 / シリカガラス / 低温 / 結晶粒径 / 繰り返し塑性域 / 応力比 / 疲労破壊靭性 / 疲労 / Reduction in Area / Layered Material / Finite Element Analysis / 二層試料 / 有限要素法解析 / 押出し / Finite element method / Redunction in area / 有限要素法 … More Except Principal Investigator Copper / Silver / Gold / Microcrack / Fatigue Slip Band / Scanning Tunneling Microscope / マイクロクラックの発生 / 走差トンネル顕微鏡 / 銅 / 銀 / 金 / マイクロクラック / 疲労すべり帯 / 走査トンネル顕微鏡 Less

Study on the Shaping of Gear having Different Carbon Content on the Cross Sectional Area by Extrusion Using Layerd MaterialPrincipal Investigator
- Principal Investigator
  
  SAWAKI Yozo
- Project Period (FY)
  2004 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Shizuoka University
Study on the shaping of geard parts by two-step extrusion methodPrincipal Investigator
- Principal Investigator
  
  SAWAKI Yozo
- Project Period (FY)
  2001 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Shizuoka University
Study on Fatigue Slip Bands and Nucleation of Microcracks by Using Scanning Tunneling Microscope
- Principal Investigator
  
  ISHII Hitoshi
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械材料工学
- Research Institution
  Shizuoka University
Fundamental Studies on teh Environmental Fatigue Fracture Toughness and the Design Curve of Structural MaterialsPrincipal Investigator
- Principal Investigator
  
  SAWAKI Yozo
- Project Period (FY)
  1986 – 1987
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械材料工学
- Research Institution
  TOHOKU UNIVERSITY

All 2007 2006 2005 2004 Other

All Journal Article Patent

[Journal Article] 浸炭試料を用いた二段充てん法による平歯車の押出し成形2006
- Author(s)
  沢木洋三
- Journal Title
  
  第57回塑性加工連合講演会講演論文集
  
  Pages: 35-36
- Data Source
  KAKENHI-PROJECT-16560093
[Journal Article] マンドレルを用いない二段充てん法による平歯車の成形2005
- Author(s)
  沢木洋三
- Journal Title
  
  平成17年度塑性加工春季講演会講演論文集
  
  Pages: 169-170
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560093
[Journal Article] FEM Analysis for Shaping Spur Gear by Two-step Cold Extrusion2005
- Author(s)
  Y.SAWAKI
- Journal Title
  
  Yamanashi District 2004
  
  Pages: 13-14
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560093
[Journal Article] 二段充てん法による平歯車の成形に対する有限要素解析2005
- Author(s)
  沢木洋三
- Journal Title
  
  日本機械学会関東支部山梨講演会講演論文集
  
  Pages: 13-14
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560093
[Journal Article] Shaping Spur Gear by Two-step Extrusion2005
- Author(s)
  Y.SAWAKI
- Journal Title
  
  Proc. 2005 Japanese Spring Conf Technology of Plasticity
  
  Pages: 169-170
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560093
[Journal Article] Shaping of Spur Gear by Two-Step Extrusion Method without Reducing Outer Diameter of Workpiece2004
- Author(s)
  Y.SAWAKI
- Journal Title
  
  J. Japan Soc. Tech. Plasticity 45. 525
  
  Pages: 827-841
- NAID
  10013395059
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560093
[Journal Article] 外径を絞らない二段充てん法による平歯車の成形2004
- Author(s)
  沢木洋三
- Journal Title
  
  日本塑性加工学会誌 45・525
  
  Pages: 837-841
- NAID
  10013395059
- Data Source
  KAKENHI-PROJECT-16560093
[Journal Article] 外径を絞らない二段充てん法による平歯車の成形2004
- Author(s)
  沢木洋三
- Journal Title
  
  日本塑性加工学会誌 45/525
  
  Pages: 837-841
- NAID
  10013395059
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560093
[Journal Article] Extrusion of Hollow Cylinder Workpiece through Reducing Outer Diameter2004
- Author(s)
  Y.SAWAKI
- Journal Title
  
  Proc. Conf Japan Soc. Mech. Eng. Yamanashi District 2004
  
  Pages: 295-296
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560093
[Journal Article] 中空円筒の外径絞り押出し成形2004
- Author(s)
  沢木洋三
- Journal Title
  
  日本機械学会山梨講演会講演論文集
  
  Pages: 295-296
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560093
[Journal Article] 外径絞り押出し成形に対する有限要素法解析2004
- Author(s)
  沢木洋三
- Journal Title
  
  平成16年度塑性加工春季講演会講演論文集
  
  Pages: 39-40
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560093
[Journal Article] Finite Element Analysis for Extrusion through Reducing Outer Diameter of Workpiece2004
- Author(s)
  Y.SAWAKI
- Journal Title
  
  Proc. 2004 Japanese Spring Conf. Technology of Plasticity
  
  Pages: 39-40
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560093
[Patent] 歯車成形用金型及び同歯車成形用金型を備えた押出し成形装置2007
- Inventor(s)
  沢木洋三, 吉田始
- Filing Date
  2007-03-12
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560093
[Patent] 歯車成形用金型及び同歯車成形用金型を備えた押出し成形装置
- Inventor(s)
  沢木洋三, 吉田始
- Industrial Property Rights Holder
  静岡大学
- Data Source
  KAKENHI-PROJECT-16560093

1. YOSHIDA Hajime (90283340)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
2. ISHII Hitoshi (90022235)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
3. TOHGO Keiichiro (10155492)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. SASAKI Akira (80022309)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. SAKAIDA Yoshihisa (10334955)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

SAWAKI Yozo 沢木 洋三

Research Projects

Research Products

Co-Researchers

Study on the Shaping of Gear having Different Carbon Content on the Cross Sectional Area by Extrusion Using Layerd MaterialPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on the shaping of geard parts by two-step extrusion methodPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Fatigue Slip Bands and Nucleation of Microcracks by Using Scanning Tunneling Microscope

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fundamental Studies on teh Environmental Fatigue Fracture Toughness and the Design Curve of Structural MaterialsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 浸炭試料を用いた二段充てん法による平歯車の押出し成形2006

Author(s)

Journal Title

Data Source

[Journal Article] マンドレルを用いない二段充てん法による平歯車の成形2005

Author(s)

Journal Title

Description

Data Source

[Journal Article] FEM Analysis for Shaping Spur Gear by Two-step Cold Extrusion2005

Author(s)

Journal Title

Description

Data Source

[Journal Article] 二段充てん法による平歯車の成形に対する有限要素解析2005

Author(s)

Journal Title

Description

Data Source

[Journal Article] Shaping Spur Gear by Two-step Extrusion2005

Author(s)

Journal Title

Description

Data Source

[Journal Article] Shaping of Spur Gear by Two-Step Extrusion Method without Reducing Outer Diameter of Workpiece2004

Author(s)

Journal Title

NAID

Description

Data Source

[Journal Article] 外径を絞らない二段充てん法による平歯車の成形2004

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 外径を絞らない二段充てん法による平歯車の成形2004

Author(s)

Journal Title

NAID

Description

Data Source

[Journal Article] Extrusion of Hollow Cylinder Workpiece through Reducing Outer Diameter2004

Author(s)

Journal Title

Description

Data Source

[Journal Article] 中空円筒の外径絞り押出し成形2004

Author(s)

Journal Title

Description

Data Source

[Journal Article] 外径絞り押出し成形に対する有限要素法解析2004

SAWAKI Yozo 沢木洋三