IKE Hiroshi 池浩

Researcher Number	30087431
External Links
Affiliation (based on the past Project Information) *help	2004 – 2006: 独立行政法人理化学研究所, 大森素形材工学研究室, 先任研究員 1996 – 2001: 理化学研究所, 素形材工学研究室, 先任研究員 1992: The Institute of Physical and Chemical Research(RIKEN), Materials Fabrication Lab., Senior Research Scientist, 素形材工学研究室, 先任研究員 1990 – 1991: 理化学研究所, 素形材工学研究室, 研究員
Review Section/Research Field	Principal Investigator Material processing/treatments / Material processing/treatments / 金属加工(含鋳造)
Keywords	Principal Investigator 塑性加工 / 微細表面形状 / Data Matrix / AFM / 塑性変形 / plasto-hydrodynamic lubrication / QR Code / miniaturization / surface roughness / 2D bar code … More / dot impact / optical measurements / microforming / 有限要素解析 / 圧印加工 / 転写加工 / マイクロ塑性加工 / 微細加工 / 光学的読み取り / ダイレクトマーキング / 2次元バーコード / Atomic Force Microscope / metal forming / replication / progressive forming / forging / coining / Surface microgeometry / 原子間力顕微鏡 / 転写 / 順加工 / 圧造 / 圧印 / indentation hardness / mirror surface / tribology / boundary lubrication / plastic deformation / surface microgeometry / 楔の押込み / 表面粗さ / 鏡面 / 押込み硬さ / トライボロジー / 塑性-流体潤滑 / 境界潤滑 / relaxation / high-pressure viscosity / glass transition / liquid lubricant / oil pit / direct observation / rolling / 混合潤滑 / 界面 / 鉱油 / 潤滑 / 板材 / アルミニウム / 緩和 / 高圧粘度 / 固化 / 液体潤滑剤 / オイルピット / 塑性流体潤滑 / 直接観察 / 圧延 / Plastic working / Coining / Ion-Beam Etching / Surface Microgeometry / Mask / Metal Foil / WC-Co / Metalworking Tool / 薄板 / フォトエッチング / イオンビ-ム・エッチング / トライボロジ- / 微視的表面形状 / ドライエッチング / コイニング / イオンビームエッチング / マスク / 金属箔 / 超硬合金 / 金型 Less

Creation of function of information transmission by micro-metalforming of surface microgeometry utilizing technology of plasticityPrincipal Investigator
- Principal Investigator
  
  IKE Hiroshi
- Project Period (FY)
  2004 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  RIKEN
Nanoscopic replication mechanism of surface microgeometry in technology of plasticity.Principal Investigator
- Principal Investigator
  
  IKE Hiroshi
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  RIKEN-The Institute of Physical and Chemical Reseach
Nanoscopic study and application of tribo-plastic deformation mechanismPrincipal Investigator
- Principal Investigator
  
  IKE Hiroshi
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  RIKEN
Direct observation of rolling interface of metal sheet by CCD Camera embedded into a roll and a study of lubrication mechanismPrincipal Investigator
- Principal Investigator
  
  IKE Hiroshi
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  The Institute of Physical and Chemical Research (RIKEN)
STUDY ON DESIGNING 3-D CONTROLLED SURFACE MICROGEOMETRY OF WORKPIECE IN METALWORKING.Principal Investigator
- Principal Investigator
  
  IKE Hiroshi
- Project Period (FY)
  1990 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  The Institute of Physical and Chemical Research(RIKEN)

All 2007 2006 2005 2004

All Journal Article

[Journal Article] 微細表面形状の塑性加工による情報伝達機能生成(第3報被加工材の表面あらさの影響)2007
- Author(s)
  池浩
- Journal Title
  
  平成19年度塑性加工春季講演会講演論文集
  
  Pages: 107-108
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] The effect of surface roughness of metal workpiece on capability of decoding 2D barcode symbols formed by a micro-dot impact pin2007
- Author(s)
  H.Ike
- Journal Title
  
  The Proc. 2007 Japanese Spring Conference for the Technology of Placticity
  
  Pages: 107-108
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] Microforming of cavities for direct marking of two-dimensional barcode symbols2006
- Author(s)
  Hiroshi IKE
- Journal Title
  
  ESAFORM 2006 - The 9th International Conference on Material Forming
  
  Pages: 551-554
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] 微細表面形状の塑性加工による情報伝達機能の創成-円錐ピンによる2次元バーコードの逐次マイクロ塑性加工-2006
- Author(s)
  池浩
- Journal Title
  
  塑性と加工(日本塑性加工学会誌) 47
  
  Pages: 943-947
- NAID
  10018106243
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] Microforming of cavities for direct marking of two-dimensional barcode symbols2006
- Author(s)
  H.Ike
- Journal Title
  
  Procc. Of the 9^<th> Int. Conf. on Material Forming, ESAFORM 2006
  
  Pages: 551-554
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] Microforming of surface cavities as direct marking of two-dimensional bar code symbols by a dot impact pin -Utilization of metal surface as information transmitter-2006
- Author(s)
  H.Ike
- Journal Title
  
  J. Japan Soc. For Technol. Plasticity
- NAID
  10018106243
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] Microforming of cavities for direct marking of two-dimensional barcode symbols2006
- Author(s)
  Hiroshi IKE
- Journal Title
  
  ESAFORM 2006 - The 9 : h International Conference on Material Forming
  
  Pages: 551-554
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] Miniaturization of surface microcavities up to 800DPI for information transmission by metal forming2006
- Author(s)
  H.Ike
- Journal Title
  
  The Proc. 2006 Japanese Spring Conference for the Technology of Placticity
  
  Pages: 281-282
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] 微細表面形状の塑性加工による情報伝達機能生成(第2報 2次元バーコードの800DPIへの微細化)2006
- Author(s)
  池浩
- Journal Title
  
  平成18年度塑性加工春季講演会講演論文集
  
  Pages: 281-282
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] Miniaturization of Dot Pattern by Metal Forming for Direct Marking of 2D Barcode Symbols2006
- Author(s)
  Hiroshi IKE
- Journal Title
  
  Towards Synthesis of Micro-/Nano-systems - The 11th International Conference on Precision Engineering
  
  Pages: 215-219
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] Microforming of Cavities for Direct Marking of Two-Dimensional Bar Code Symbols2006
- Author(s)
  Ike, H.
- Journal Title
  
  Proceedings of the 9th ESAFORM Conf. (in print.)
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] Miniaturization of dot pattern by metal forming for direct marking of 2D barcode2006
- Author(s)
  H.Ike
- Journal Title
  
  Toward synthesis of Micro-/Nano-systems, Proc. 11th Int. Conf. on Precision Engng
  
  Pages: 215-219
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] 微細表面形状の塑性加工による情報伝達機能生成2005
- Author(s)
  池浩
- Journal Title
  
  第56回塑性加工連合講演会講演論文集
  
  Pages: 587-588
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] 凹凸が隣接する微細表面形状の転写挙動2005
- Author(s)
  池浩
- Journal Title
  
  平成17年度塑性加工春季講演会講演論文集
  
  Pages: 205-206
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] 塑性加工の表面損傷と微細表面形状の加工に関する研究2005
- Author(s)
  池浩
- Journal Title
  
  塑性と加工 46-539
  
  Pages: 1116-1120
- NAID
  10016727946
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] Nanoscopic surface texture formed by indentation and sliding of a smooth wedge tool2005
- Author(s)
  Ike H.
- Journal Title
  
  Wear 258-9
  
  Pages: 1404-1410
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] 被膜試験片への圧印による平滑面と微細表面形状の転写2004
- Author(s)
  池浩, 中野祐介
- Journal Title
  
  第55回塑性加工連合講演会講演論文集
  
  Pages: 343-344
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] 多点圧印加工として近似した調質圧延の弾塑性有限要素解析2004
- Author(s)
  池浩
- Journal Title
  
  材料とプロセス 17-5
  
  Pages: 1009-1010
- NAID
  10013506741
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] 圧印による多数微細突起の盛り上がり過程の有限要素解析2004
- Author(s)
  池浩, 水本直志
- Journal Title
  
  平成16年度塑性加工春季講演会講演論文集
  
  Pages: 339-340
- Data Source
  KAKENHI-PROJECT-16560643
[Journal Article] Surface nano-/microgeometry formed by plastic deformation with interfacial sliding and bulk plasticity2004
- Author(s)
  Ike H.
- Journal Title
  
  Proc.of the 2nd Int.Conf.on Tribology in Manufacturing Processes 2
  
  Pages: 411-418
- Data Source
  KAKENHI-PROJECT-16560643

1. KOHNO Akio (20087456)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
2. KURIYAMA Shinkou (90087461)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

IKE Hiroshi 池 浩

Research Projects

Research Products

Co-Researchers

Creation of function of information transmission by micro-metalforming of surface microgeometry utilizing technology of plasticityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Nanoscopic replication mechanism of surface microgeometry in technology of plasticity.Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Nanoscopic study and application of tribo-plastic deformation mechanismPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Direct observation of rolling interface of metal sheet by CCD Camera embedded into a roll and a study of lubrication mechanismPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

STUDY ON DESIGNING 3-D CONTROLLED SURFACE MICROGEOMETRY OF WORKPIECE IN METALWORKING.Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 微細表面形状の塑性加工による情報伝達機能生成(第3報 被加工材の表面あらさの影響)2007

Author(s)

Journal Title

Description

Data Source

[Journal Article] The effect of surface roughness of metal workpiece on capability of decoding 2D barcode symbols formed by a micro-dot impact pin2007

Author(s)

Journal Title

Description

Data Source

[Journal Article] Microforming of cavities for direct marking of two-dimensional barcode symbols2006

Author(s)

Journal Title

Data Source

[Journal Article] 微細表面形状の塑性加工による情報伝達機能の創成-円錐ピンによる2次元バーコードの逐次マイクロ塑性加工-2006

Author(s)

Journal Title

NAID

Description

Data Source

[Journal Article] Microforming of cavities for direct marking of two-dimensional barcode symbols2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] Microforming of surface cavities as direct marking of two-dimensional bar code symbols by a dot impact pin -Utilization of metal surface as information transmitter-2006

Author(s)

Journal Title

NAID

Description

Data Source

[Journal Article] Microforming of cavities for direct marking of two-dimensional barcode symbols2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] Miniaturization of surface microcavities up to 800DPI for information transmission by metal forming2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] 微細表面形状の塑性加工による情報伝達機能生成(第2報 2次元バーコードの800DPIへの微細化)2006

Author(s)

Journal Title

Description

Data Source

IKE Hiroshi 池浩

[Journal Article] 微細表面形状の塑性加工による情報伝達機能生成(第3報被加工材の表面あらさの影響)2007