• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

MORITA Noboru  森田 昇

ORCIDConnect your ORCID iD *help
Researcher Number 30239660
Other IDs
External Links
Affiliation (based on the past Project Information) *help 2017 – 2022: 千葉大学, 大学院工学研究院, 教授
2016: 千葉大学, 大学院工学研究科, 教授
2011 – 2016: 千葉大学, 工学(系)研究科(研究院), 教授
2013 – 2014: 千葉大学, 大学院工学研究科, 教授
2011 – 2012: 千葉大学, 大学院・工学研究科, 教授 … More
2008 – 2010: 富山大学, 大学院・理工学研究部(工学), 教授
2009: 富山大学, 大学院・理工学研究部・工学, 教授
2007 – 2008: University of Toyama, 理工学研究部, 教授
2006: 富山大学, 大学院理工学研究部(工学), 教授
2006: University of Toyama, Engineering, Professor, 理工学研究部(工学), 教授
2002 – 2006: Toyama university, Faculty of Engineering, Professor, 工学部, 教授
2001: 千葉大学, 工学部, 助教授
1995 – 1998: 千葉大学, 工学部, 助教授
1993 – 1994: 千葉大学, 工学部, 助手 Less
Review Section/Research Field
Principal Investigator
Production engineering/Processing studies / 機械工作・生産工学 / Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields / Mechanics of materials, Production engineering, Design engineering, and related fields
Except Principal Investigator
Production engineering/Processing studies / 機械工作・生産工学 / Basic Section 18020:Manufacturing and production engineering-related / Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
Keywords
Principal Investigator
ダイヤモンド / 単結晶シリコン / 摩擦力顕微鏡 / CVD / ナノ加工 / マイクロ加工 / 加工用カンチレバー / 集束イオンビーム / 割断 / ガラス … More / 3次元微細加工 / Single Crystal Silicon / Friction Force Microscope / 精密部品加工 / カンチレバー / AFM / 微細加工 / 原子間力顕微鏡 / 化学エッチング / 亀裂進展 / 特殊加工 / 光弾性 / 透明材料 / レーザ / 走査型電子顕微鏡観察 / 破壊力学 / 走査型電子顕微鏡 / 割断面品質 / 内部応力場 / 位相差情報 / 高速偏光計測 / ホイール割断 / Photolithography / Cantilever for machining / Three-dimensional nanofabrication / Friction force microscope / フォトリソグラフィー / Pitch of processing line / Normal load / Affected layer / 3D Micro-Fabrication / Cantilever for Machining / Alkaline Etching / エッチングマスク / 加工変質層 / 走査線送り量 / 垂直荷重 / 極微細構造 / アルカリエッチング / Micro-Cantilever / Micro-Machining / 垂直分力 / 水平分力 / 加工機構 / Hard steel / Cutting force sensor / Endmilling / Tool wear / High speed machining / 切削力動力計 / 高速切削加工 / 加工現象 / 切削動力計 / 工具摩耗 / 高速切削 / Aluminium substrate / Surface integrity / Ceramics / Monocrystalline silicon / Abresive grains / Grinding / Lapping / Anodic spark deposition / 鏡面研磨加工 / 脆性材料 / 超砥粒 / 陽極火花放電法 / 研磨加工 / 触媒 / VLSモデル / ナノチューブ / ナノテクノロジー / 故障解析 / LSI / マイクロ・ナノ加工 / 故障診断 / LSI回路 / ナノ / 工具 / FIB / 選択成長 / 極微細加工 / 多機能型ダイヤモンド工具 / 多機能ダイヤモンド工具 / イオンエネルギ / ドーズ量 / フッ酸 / KOH / 3次元微細構造形成 … More
Except Principal Investigator
ガラス / 固体イオン交換 / レーザ / 極微細加工 / 金属析出 / 電圧印加 / 内部配線 / 銀 / 精密部品加工 / マニピュレーション / イオン交換 / ダイヤモンドアレイ工具 / シリコンモールド / ダイヤモンド工具 / 高精度化 / マイクロダイヤモンド工具 / 金属ナノ析出物 / 成長方向制御 / 形状制御 / 析出 / ナノワイヤ / ナノ粒子 / デドープ / ドープ / 亀裂 / 析出物 / 金 / 割断 / 化学強化ガラス / レーザ誘起プラズマ / Ultra Micro Machining / Reactive Ion Etching / Polycrystalline Diamond / Anisotropic Etching / Silicon Mold / Diamond Array Tool / 反応性イオンエッチング / 多結晶ダイヤモンド / 異方性エッチング / optical element with nano-structures / injection molding / hot pressing / micro-structures on the mold surface / micro processing / nano / ナノ光学素子 / 射出成形 / ホットプレス / 微細金型 / ナノ・マイクロ加工 / Wear Monitoring / Cutting Temperature / Cutting force / Tool Wear / High Speed Cutting / 切削動力計 / 超高速切削加工 / モニタリング / 切削温度 / 切削抵抗 / 工具損耗 / 高速切削加工 / vacuum environment / tribology / real area of contact / contact surface / contact pressure distribution / vacuum ultra-violet laser / oxygen absorption process / exoelectron / 接触剛性 / 光励起 / 機械的接触現象 / 極限環境 / 真空環境 / トライボロジー / 真実接触面積 / 結合面 / 接触圧力分布 / 真空紫外レーザ光 / 酸素吸着過程 / エキソ電子 / Thermal deformation / Armosphere / Surface measurement / Atomic force microscope / 観察評価 / 熱変形 / 原子間力顕微鏡 / 微細加工 / 超高真空 / 光てこ / 硬ぜい材料 / 機械加工 / マイクロナノ加工 / 臨界切込み深さ / 柔軟カンチレバー構造 / 加工力制御 / 延性モード切削 / 硬脆材料 / 切削加工 / マニピュレ-ション / 微粒子 / レーザ加工 / 光学特性 / マイクロ加工 / ナノ微粒子 / SPM / 高アスペクト比 / 加工用カンチレバー / 微細溝加工 / 集束イオンビーム Less
  • Research Projects

    (29 results)
  • Research Products

    (120 results)
  • Co-Researchers

    (19 People)
  •  Control of shape and position of metal nanoprecipitates in glass and engineering applications

    • Principal Investigator
      Matsusaka Souta
    • Project Period (FY)
      2020 – 2022
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Chiba University
  •  Laser-induced metal sphere manipulation in glass

    • Principal Investigator
      HIDAI HIROFUMI
    • Project Period (FY)
      2019 – 2021
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Chiba University
  •  Development of novel cleavage technique of chemically strengthened glass using nano-precipitates formed by solid-state ion-exchange method

    • Principal Investigator
      Matsusaka Souta
    • Project Period (FY)
      2018 – 2019
    • Research Category
      Grant-in-Aid for Challenging Research (Exploratory)
    • Review Section
      Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
    • Research Institution
      Chiba University
  •  透明材料の破壊過程の学理解明とそのためのオプティカルアナリシスベースの構築Principal Investigator

    • Principal Investigator
      森田 昇
    • Project Period (FY)
      2018 – 2022
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Review Section
      Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
    • Research Institution
      Chiba University
  •  Laser-induced modification of diamondPrincipal Investigator

    • Principal Investigator
      Morita Noboru
    • Project Period (FY)
      2017 – 2018
    • Research Category
      Grant-in-Aid for Challenging Research (Exploratory)
    • Research Field
      Mechanics of materials, Production engineering, Design engineering, and related fields
    • Research Institution
      Chiba University
  •  Dynamics of laser-induced plasma ejection which is generated in bulk glass and its application

    • Principal Investigator
      Hidai Hirofumi
    • Project Period (FY)
      2016 – 2018
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Chiba University
  •  Formation process of metal precipitation layer in glass substrate by solid-state ion-exchange method, and application to fine electrical wiring

    • Principal Investigator
      Matsusaka Souta
    • Project Period (FY)
      2015 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Chiba University
  •  Elucidation of mechanical scribing mechanisms of glass sheet by ultrahigh speed photoelastic stress imaging technique, and development of dynamic scribing theoryPrincipal Investigator

    • Principal Investigator
      Morita Noboru
    • Project Period (FY)
      2015 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Chiba University
  •  Study on micro-nanometer scale cutting system by using elastic cantilever-type tool holder with force feedback

    • Principal Investigator
      ASHIDA Kiwamu
    • Project Period (FY)
      2014 – 2016
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      National Institute of Advanced Industrial Science and Technology
  •  Fabrication of plasma generator enhanced hot filament and research of phase-change from diamond to graphitePrincipal Investigator

    • Principal Investigator
      MORITA Noboru
    • Project Period (FY)
      2013 – 2014
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Chiba University
  •  Dispersion process of metal nanoparticles in glass substrate prepared by electric field-assisted solid-state ion exchange

    • Principal Investigator
      MATSUSAKA Souta
    • Project Period (FY)
      2012 – 2014
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Chiba University
  •  Particle manipulation in glass by laser illumination

    • Principal Investigator
      HIDAI Hirofumi
    • Project Period (FY)
      2012 – 2013
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Chiba University
  •  Development of precision hybrid diamond tool and its application to micro-device fabricationPrincipal Investigator

    • Principal Investigator
      MORITA Noboru
    • Project Period (FY)
      2011 – 2013
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Chiba University
  •  Development of fault detection/diagnosis method of multi-layered interconnection in LSI circuit by AFM mechanismPrincipal Investigator

    • Principal Investigator
      MORITA Noboru
    • Project Period (FY)
      2011 – 2012
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Chiba University
  •  Study on SPM Aided V-shaped Micro-grooving on Curved Surface by Cantilever for processing

    • Principal Investigator
      TAKANO Noboru
    • Project Period (FY)
      2009 – 2011
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      University of Toyama
  •  The study on development of multifunctional diamond tools and its applications for micro/nano scale machiningPrincipal Investigator

    • Principal Investigator
      MORITA Noboru
    • Project Period (FY)
      2008 – 2010
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      University of Toyama
  •  Study on Micro Diamond Tool with High Accuracy

    • Principal Investigator
      TAKANO Noboru
    • Project Period (FY)
      2007 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      University of Toyama
  •  集束イオンビームと化学エッチングを併用した3次元微細構造創製法に関する研究Principal Investigator

    • Principal Investigator
      森田 昇
    • Project Period (FY)
      2006 – 2007
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      University of Toyama
  •  Development of molding process to reproduce micro-structures of 100 nm pitch at a wide area of 100 mm - side square

    • Principal Investigator
      NAKAO Masayuki
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      The University of Tokyo
  •  ダイヤモンドマイクロアレイ工具の創成と極微細加工に関する研究

    • Principal Investigator
      TAKANO Noboru
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      University of Toyama
  •  Development of three-dimensional nanomachining and measuring system and its application to nano-scale moldingPrincipal Investigator

    • Principal Investigator
      MORITA Noboru
    • Project Period (FY)
      2004 – 2005
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      University of Toyama
  •  物理的除去加工と化学的除去加工を併用した3次元マイクロ構造形成法に関する研究Principal Investigator

    • Principal Investigator
      森田 昇
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      University of Toyama
  •  Micro-Fabrication by Using Combination Technique of Nano-scale Machining and Alkaline EtchingPrincipal Investigator

    • Principal Investigator
      MORITA Noboru
    • Project Period (FY)
      2001 – 2002
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Toyama university
      Chiba University
  •  Development of Tool Wear Monitor for High Speed Endmilling

    • Principal Investigator
      YOSHIDA Yoshitaro
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      CHIBA UNIVERSITY
  •  Study on Mechanism of Micro-machining using Friction Force MicroscopePrincipal Investigator

    • Principal Investigator
      MORITA Noboru
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Chiba University
  •  Research on Tribology Evaluation of Mechanical Contact Phenomena in Extreme Environment

    • Principal Investigator
      YOSHIDA Yoshitaro
    • Project Period (FY)
      1996 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Chiba University
  •  STUDY ON TOOL WEAR MONITORING METHOD FOR HIGH SPEED MACHININGPrincipal Investigator

    • Principal Investigator
      MORITA Noboru
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      CHIBA UNIVERSITY
  •  STUDY ON MEASURING SYSTEM IN SPECIAL ENVIROMENT FOR MICROSCOPIC STRUCTURE OF NANOMACHINED SURFACE

    • Principal Investigator
      YOSHIDA Yoshitaro
    • Project Period (FY)
      1993 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      CHIBA UNIVERSITY
  •  STUDY ON FLEXIBLE LAPPING AND GRAINDING TOOLS FOR MIRROR SURFACE FINISHINGPrincipal Investigator

    • Principal Investigator
      MORITA Noboru
    • Project Period (FY)
      1993 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      CHIBA UNIVERSITY

All 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2008 2007 2004 Other

All Journal Article Presentation Patent

  • [Journal Article] Metal sphere migration in glass by surface heating using CO2 laser2022

    • Author(s)
      Sawafuji Arata、Hidai Hirofumi、Matsusaka Souta、Chiba Akira、Morita Noboru
    • Journal Title

      Precision Engineering

      Volume: 73 Pages: 326-331

    • DOI

      10.1016/j.precisioneng.2021.10.003

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Journal Article] Fine hole drilling of alkali-containing silicate glass substrate using preferential penetration of etchants around silver precipitates2022

    • Author(s)
      Kawamura Hirofumi、Okuda Riku、Matsusaka Souta、Nomoto Kentaro、Kodaka Hiroki、Hidai Hirofumi、Chiba Akira、Morita Noboru
    • Journal Title

      Precision Engineering

      Volume: 76 Pages: 141-148

    • DOI

      10.1016/j.precisioneng.2022.03.017

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20J13023, KAKENHI-PROJECT-20K04190
  • [Journal Article] Dedoping of phosphorus and tin via laser-induced nickel sphere migration in glass ceramics2022

    • Author(s)
      Yoshimura Shukoh、Hidai Hirofumi、Matsusaka Souta、Chiba Akira、Kishi Tetsuo、Morita Noboru
    • Journal Title

      Journal of Non-Crystalline Solids

      Volume: 584 Pages: 121506-121506

    • DOI

      10.1016/j.jnoncrysol.2022.121506

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Journal Article] Core-shell sphere formation by laser-induced migration of stainless steel sphere in silver-doped glass2022

    • Author(s)
      Yoshimura Shukoh、Hirofumi Kawamura、Hidai Hirofumi、Matsusaka Souta、Chiba Akira、Kishi Tetsuo、Morita Noboru
    • Journal Title

      Applied Physics A

      Volume: accepted Issue: 5

    • DOI

      10.1007/s00339-022-05578-x

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Journal Article] Laser heating conditions for copper sphere implantation into borosilicate glass2022

    • Author(s)
      Fukushima Shunta、Hidai Hirofumi、Matsusaka Souta、Chiba Akira、Morita Noboru
    • Journal Title

      Optics & Laser Technology

      Volume: 146 Pages: 107494-107494

    • DOI

      10.1016/j.optlastec.2021.107494

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Journal Article] Morphology of Cleaved Surface and Observation of <i><b>In Situ</b></i> Crack Propagation During Cleaving2021

    • Author(s)
      Iwatsuki Soshi、Hidai Hirofumi、Matsusaka Souta、Chiba Akira、Morita Noboru
    • Journal Title

      International Journal of Automation Technology

      Volume: 15 Issue: 4 Pages: 483-491

    • DOI

      10.20965/ijat.2021.p0483

    • NAID

      130008062466

    • ISSN
      1881-7629, 1883-8022
    • Year and Date
      2021-07-05
    • Language
      English
    • Open Access
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Journal Article] Metal Sphere Separation in Glass by the Two Laser Beam Illumination2021

    • Author(s)
      IMAZEKI Taichi、NISHIOKA Nobuyasu、HIDAI Hirofumi、MATSUSAKA Souta、CHIBA Akira、MORITA Noboru
    • Journal Title

      Journal of the Japan Society for Precision Engineering

      Volume: 87 Issue: 6 Pages: 581-587

    • DOI

      10.2493/jjspe.87.581

    • NAID

      130008049244

    • ISSN
      0912-0289, 1882-675X
    • Year and Date
      2021-06-05
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Journal Article] 銀イオンとナトリウムイオンの交互添加によるガラス内銀析出物の二層化2021

    • Author(s)
      大西皓介,川村拓史,松坂壮太,比田井洋史,千葉明,森田昇
    • Journal Title

      精密工学会誌(Accepted)

      Volume: -

    • NAID

      130008062368

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-20K04190
  • [Journal Article] 2方向レーザ照射によるガラス内部での金属球の分裂2021

    • Author(s)
      今関太一,西岡宣泰,比田井洋史,松坂壮太,千葉明,森田昇
    • Journal Title

      精密工学会誌

      Volume: 87

    • NAID

      130008049244

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Journal Article] A study of crack generation at loading/unloading process in wheel cleaving (Circular/half-penny crack generation mechanisms)2021

    • Author(s)
      IMAI Kentaro、ASARI Tomoki、MATSUMOTO Yuichiro、MATSUSAKA Souta、HIDAI Hirofumi、CHIBA Akira、MORITA Noboru
    • Journal Title

      Transactions of the JSME (in Japanese)

      Volume: 87 Issue: 902 Pages: 21-00190-21-00190

    • DOI

      10.1299/transjsme.21-00190

    • NAID

      130008108011

    • ISSN
      2187-9761
    • Language
      Japanese
    • Open Access
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Journal Article] Examination of internal stress by photoelasticity in laser cleaving of glass2020

    • Author(s)
      Soshi Iwatsuki, Hirofumi Hidai, Akira Chiba, Souta Matsusaka, Noboru Morita
    • Journal Title

      Precision Engineering

      Volume: 64 Pages: 122-128

    • DOI

      10.1016/j.precisioneng.2020.03.019

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Journal Article] Clarification of fast metal sphere movement in glass2019

    • Author(s)
      Nobuyasu Nishioka, Hirofumi Hidai, Souta Matsusaka, Akira Chiba, Noboru Morita
    • Journal Title

      Optics express

      Volume: 27 Issue: 13 Pages: 18988-19001

    • DOI

      10.1364/oe.27.018988

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H02035, KAKENHI-PROJECT-18J22593
  • [Journal Article] Dynamic observation of crack generation during wheel scribing from lateral and back sides using a high-speed camera2019

    • Author(s)
      Imai Kentaro、Saito Masahiro、Matsusaka Souta、Matsumoto Yuichiro、Hidai Hirofumi、Chiba Akira、Morita Noboru
    • Journal Title

      Precision Engineering

      Volume: 60 Pages: 421-427

    • DOI

      10.1016/j.precisioneng.2019.06.013

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Journal Article] Control of a fast-moving metal sphere trajectory in glass2019

    • Author(s)
      Nobuyasu Nishioka, Hirofumi Hidai, Souta Matsusaka, Akira Chiba, Noboru Morita
    • Journal Title

      Optical Materials Express

      Volume: 10 Issue: 4 Pages: 1105-1119

    • DOI

      10.1364/ome.386813

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-18J22593, KAKENHI-PROJECT-19H02035
  • [Journal Article] 走査型電子顕微鏡(SEM)を用いたガラスのホイールスクライブ挙動の観察2018

    • Author(s)
      齊藤 雅裕,今井 健太郎,松本 祐一郎,松坂 壮太,比田井 洋史,千葉 明,森田 昇
    • Journal Title

      精密工学会誌

      Volume: 印刷中

    • NAID

      130007393960

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15H03898
  • [Journal Article] 電圧印加を併用した固体イオン交換法によるガラス内部への多層電気伝導路の形成2018

    • Author(s)
      鈴木隆太,川村拓史,松坂壮太,比田井洋史,千葉明,森田昇
    • Journal Title

      精密工学会誌

      Volume: 印刷中

    • NAID

      130007384341

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05712
  • [Journal Article] In-process estimation of fracture surface morphology during wheel scribing of a glass sheet by high-speed photoelastic observation2017

    • Author(s)
      Ryohei Hasegawa, Souta Matsusaka, Hirofumi Hidai, Akira Chiba, Noboru Morita, Takashi Onuma
    • Journal Title

      Precision Engineering

      Volume: 48 Pages: 164-171

    • DOI

      10.1016/j.precisioneng.2016.11.017

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-15H03898
  • [Journal Article] ガラスへの圧子押込みにおける応力状態とクラック進展過程の動的観察 ~くさび形圧子押込みによる2次元的な観察~2017

    • Author(s)
      比田井洋史,長谷川良平,堀江勇太,千葉明,松坂壮太,大沼隼志,森田昇
    • Journal Title

      精密工学会誌

      Volume: 83 Pages: 381-386

    • NAID

      130005548957

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-15H03898
  • [Journal Article] Synthesis of silica glass fibers and nanoparticles by continuous-wave laser backside irradiation2017

    • Author(s)
      Namiko Saito, Hirofumi Hidai, Souta Matsusaka, Akira Chiba, and Noboru Morita
    • Journal Title

      Appl. Phys. A

      Volume: 123 Issue: 10 Pages: 632-632

    • DOI

      10.1007/s00339-017-1242-5

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-16K06004
  • [Journal Article] Development of a non-rigid cutting mechanism applying a normal cutting force control system2016

    • Author(s)
      G. Herrera-Granados, N. Morita, H. Hidai, S. Matsusaka, A. Chiba., K. Ashida, I. Ogura, Y. Okazaki
    • Journal Title

      Precision Engineering

      Volume: Vol.43 Pages: 544-553

    • DOI

      10.1016/j.precisioneng.2015.09.021

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26289022
  • [Journal Article] Two-Dimensional Dynamic Stress Behavior of Sheet Glass Caused by a Continuous Step Input from a Cylindrical Loader2016

    • Author(s)
      Akira Chiba, Hirofumi Hidai, Souta Matsusaka, Noboru Morita
    • Journal Title

      International Journal of Automation Technology

      Volume: 10 Issue: 3 Pages: 401-410

    • DOI

      10.20965/ijat.2016.p0401

    • NAID

      130007673859

    • ISSN
      1881-7629, 1883-8022
    • Year and Date
      2016-05-05
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15H03898
  • [Journal Article] Experimental stress analysis of glass cutting using a non-rigid cutting mechanism2015

    • Author(s)
      G. Herrera-Granados, N. Morita, H. Hidai, S. Matsusaka, A. Chiba., K. Ashida, I. Ogura, Y. Okazaki
    • Journal Title

      Manufacturing Letters

      Volume: Vol.6 Pages: 14-18

    • DOI

      10.1016/j.mfglet.2015.11.003

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26289022
  • [Journal Article] Formation of a buried silver nanowire network in borosilicate glass by solid-state ion exchange assisted by forward and reverse electric fields2014

    • Author(s)
      Souta MATSUSAKA, Naotomo MAEHARA, Hirofumi HIDAI, Akira CHIBA, Noboru MORITA and Takaomi ITOI
    • Journal Title

      Applied Physics Letters

      Volume: 105 Issue: 10 Pages: 103102-103102

    • DOI

      10.1063/1.4895521

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-24560125
  • [Journal Article] ダイヤモンドアレイ工具を用いたマイクロ加工に関する研究 第3報 : FIB により先鋭化した加工用 AFM カンチレバーを用いた微細 V 溝加工2014

    • Author(s)
      高野登, 清水大志, 山田茂, 森田昇
    • Journal Title

      砥粒加工学会誌

      Volume: (掲載決定)

    • NAID

      130004835718

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360067
  • [Journal Article] ダイヤモンドアレイ工具を用いたマイクロ加工に関する研究 第4報 : 加工用 AFMカンチレバーを用いた高能率微細加工2014

    • Author(s)
      高野登, 園部修也, 山田茂, 森田昇
    • Journal Title

      砥粒加工学会誌

      Volume: (掲載決定)

    • NAID

      130004835722

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360067
  • [Journal Article] Transmittance Properties and TEM Observation of Metal Doped Glass by Field-Assisted Ion Exchange2014

    • Author(s)
      Souta MATSUSAKA, Taketsugu NOMURA, Hirofumi HIDAI, Akira CHIBA and Noboru MORITA
    • Journal Title

      IOP Conference Series: Materials Science and Engineering

      Volume: 61 Pages: 012011-012011

    • DOI

      10.1088/1757-899x/61/1/012011

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-24560125
  • [Journal Article] Development of a Non-RigidMicro-Scale Cutting Mechanism Measuring the Cutting Force Using an Optical Lever2014

    • Author(s)
      German Herrera-Granados, Kiwamu Ashida, Ichiro Ogura, Yuichi Okazaki, Noboru Morita, Hirofumi Hidai, Souta Matsusaka, and Akira Chiba
    • Journal Title

      International Journal of Automation Technology

      Volume: Vol.8, No.6 Pages: 903-911

    • NAID

      130007673785

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-26289022
  • [Journal Article] Moving Force of Metal Particle Migration by Laser Irradiation in Borosilicate Glass2013

    • Author(s)
      "Hirofumi Hidai, Makoto Matsushita, Souta Matsusaka, Akira Chiba and Noboru Morita "
    • Journal Title

      Opt. Exp.

      Volume: 21 Issue: 16 Pages: 18955-18962

    • DOI

      10.1364/oe.21.018955

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24656096
  • [Journal Article] Development of Laser-Machinable Glass by Electric Field-Assisted Solid-State Ion Exchange2013

    • Author(s)
      松坂壮太,小早川友子,比田井洋史,森田昇
    • Journal Title

      Journal of the Japan Society for Precision Engineering

      Volume: 79 Issue: 5 Pages: 455-459

    • DOI

      10.2493/jjspe.79.455

    • NAID

      130003384983

    • ISSN
      0912-0289, 1882-675X
    • Language
      Japanese
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24560125
  • [Journal Article] Improving machining performance of single-crystal diamond toolsirradiated by a focused ion beam2013

    • Author(s)
      Noritaka Kawasegi, Tomoyuki Niwata, Noboru Morita, Kazuhito Nishimura, Hideki Sasaoka
    • Journal Title

      Precis. Engin

      Volume: 38巻,1号 Pages: 174-182

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360067
  • [Journal Article] Moving Force of Metal Particle Migration by Laser Irradiation in Borosilicate Glass2013

    • Author(s)
      Hirofumi Hidai, Makoto Matsushita, Souta Matsusaka, Akira Chiba and Noboru Morita
    • Journal Title

      Opt. Exp

      Volume: 21, 16 Pages: 18955-18962

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24656096
  • [Journal Article] Improving machining performance of single-crystal diamond toolsirradiated by a focused ion beam2013

    • Author(s)
      Noritaka Kawasegi, Tomoyuki Niwata, Noboru Morita, Kazuhito Nishimura,Hideki Sasaoka
    • Journal Title

      Precis. Engin.

      Volume: 38 Issue: 1 Pages: 174-182

    • DOI

      10.1016/j.precisioneng.2013.09.001

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360067
  • [Journal Article] マシニングセンタ型ナノ加工・計測システムの開発に関する研究2008

    • Author(s)
      稲垣清紀、森田昇、芦田極、斉藤潤二
    • Journal Title

      精密工学会誌(精密工学会論文賞受賞) 74巻、11号

      Pages: 1176-1181

    • NAID

      110006990556

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360067
  • [Journal Article] Development of a Small Machining Center Equipped With Nanomachining and Measurement Functions、3rd JSME/ASME2008

    • Author(s)
      稲垣清紀, 森田昇, 芦田極, 斉藤潤二
    • Journal Title

      International Conference on Materials and Processing

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360067
  • [Journal Article] イオンビーム照射と化学エッチングを併用した微細構造形成(第4報)-微細構造形成の高能率化-2007

    • Author(s)
      深瀬, 川堰, 森田, 山田, 高野, 大山, 芦田, 谷口, 宮本, 百田
    • Journal Title

      2007年度精密工学会春季大会学術講演会講演論文集

      Pages: 751-752

    • NAID

      130005028691

    • Data Source
      KAKENHI-PROJECT-18656045
  • [Journal Article] ナノスケール機械加工と化学エッチングを併用した3次元極微細構造形成(第1報,摩擦力顕微鏡機構を利用した3次元微細構造形成の可能性)2004

    • Author(s)
      川堰宣隆, 森田昇, 山田茂, 高野登, 大山達雄, 芦田極
    • Journal Title

      日本機械学会論文集(C編) 70,696

      Pages: 2533-2540

    • NAID

      110006264046

    • Data Source
      KAKENHI-PROJECT-15656039
  • [Journal Article] Tribonanolithography of Silicon in Aqueous Solution based on Atomic Force Microscope2004

    • Author(s)
      J.W.PARK, N.KAWASEGI, N.MORITA, D.W.LEE
    • Journal Title

      Applied Physics Letters 85,10

      Pages: 1766-1768

    • Data Source
      KAKENHI-PROJECT-15656039
  • [Journal Article] Mechanical Approach to Nanomachining of Silicon using Oxide Characteristics based on Tribo Nanolithography (TNL) in KOH Solution2004

    • Author(s)
      J.W.PARK, N.KAWASEGI, N.MORITA, D.W.LEE
    • Journal Title

      Journal of Manufacturing Science and Engineering 126

      Pages: 192-201

    • Data Source
      KAKENHI-PROJECT-15656039
  • [Journal Article] トライボナノリソグラフィーと化学エッチングを併用した単結晶シリコンのマイクロファブリケーション(微細構造の高精細化に関する検討)2004

    • Author(s)
      川堰宣隆, 森田昇, 山田茂, 高野登, 大山達雄, 芦田極
    • Journal Title

      砥粒加工学会誌 48,8

      Pages: 456-461

    • NAID

      10013325939

    • Data Source
      KAKENHI-PROJECT-15656039
  • [Journal Article] ナノスケール機械加工とアルカリエッチングを併用した単結晶シリコン表面のマイクロファブリケーション(マスキング作用の加工条件依存性と3次元微細構造への応用)2004

    • Author(s)
      川堰宣隆, 寥国新, 森田昇, 山田茂, 高野登, 大山達雄, 芦田極
    • Journal Title

      精密工学会誌 70,12

      Pages: 1766-1768

    • Data Source
      KAKENHI-PROJECT-15656039
  • [Journal Article] ナノスケール機械加工と化学エッチングを併用した3次元極微細構造形成(第2報,集束イオンビームを利用した3時元微細構造形成の可能性)2004

    • Author(s)
      川堰宣隆, 柴田浩一, 森田昇, 芦田極, 谷口淳, 宮本岩男
    • Journal Title

      日本機械学会論文集(C編) 70,696

      Pages: 2541-2547

    • Data Source
      KAKENHI-PROJECT-15656039
  • [Journal Article] シリコンモールドを用いたダイヤモンドアレイ工具の開発と応用(第2報)(任意切れ刃を持った加工用カンチレバーの作製)

    • Author(s)
      森田 昇
    • Journal Title

      精密工学会誌 採録決定

    • NAID

      110004761934

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16360064
  • [Journal Article] Development and Its Applications of Diamond Array Tool Using Silicon Mold (2nd Report)

    • Author(s)
      Noboru Morita
    • Journal Title

      Journal of the Japan Society for Precision Engineering (In press)

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16360064
  • [Journal Article] Nanomachining of Silicon Surface Using Atomic Force Microscope with Diamond Tip

    • Author(s)
      Noboru Morita
    • Journal Title

      ASME Journal of Manufacturing Science and Engineering (In press)

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16360064
  • [Journal Article] Nanomachining of Silicon Surface Using Atomic Force Microscope with Diamond Tip

    • Author(s)
      Noboru Morita
    • Journal Title

      ASME Journal of Manufacturing Science and Engineering (採録決定)

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16360064
  • [Patent] ガラス基板内に金属層を埋設する方法,金属層が埋設されたガラス基板を製造する方法,及び,金属層が埋設されたガラス基板2014

    • Inventor(s)
      松坂壮太,前原直友,森田 昇,比田井洋史,千葉 明
    • Industrial Property Rights Holder
      千葉大学
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      2014-042210
    • Filing Date
      2014-03-04
    • Data Source
      KAKENHI-PROJECT-24560125
  • [Presentation] 固体イオン交換法によってガラスに添加された銀イオンの横方向への広がり抑制2022

    • Author(s)
      奥田陸,川村拓史,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2022年度精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-20K04190
  • [Presentation] Temperature estimation of the laser-induced copper sphere implantation into glass2021

    • Author(s)
      Shunta Fukushima, Hirofumi Hidai, Souta Matsusaka, Noboru Morita
    • Organizer
      Proceedings of the LEM21 (International Conference on Leading Edge Manufacturing in 21st Century)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Presentation] SEM内スクライブ装置の開発2021

    • Author(s)
      小川佑太,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      千葉県加工技術研究会第23回大学等委員による研究事例発表会
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] SEM 内スクライブ装置によるホイール割断時の工具接触部近傍の詳細観察2021

    • Author(s)
      小川佑太,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2021年度砥粒加工学会学術講演会講演論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] Improvement in HF etching rate of borosilicate glass by dissolving internal silver precipitates2021

    • Author(s)
      Souta Matsusaka, Hirofumi Kawamura, Kentaro Nomoto, Hiroki Kodaka, Hirofumi Hidai, Akira Chiba, Noboru Morita,
    • Organizer
      International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS (Themec 2021)
    • Invited
    • Data Source
      KAKENHI-PROJECT-20K04190
  • [Presentation] サファイアのホイール割断における亀裂進展挙動に関する研究2021

    • Author(s)
      朝緑紗希,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2021年度砥粒加工学会学術講演会講演論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] ガラス内銀析出挙動における電極形状と試験雰囲気の影響2021

    • Author(s)
      立元雄也,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2021年度精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-20K04190
  • [Presentation] レーザ照射を用いた金属ドープによるガラス吸収特性の制御2021

    • Author(s)
      福嶋駿太,比田井洋史,松坂壮太,千葉明,森田昇
    • Organizer
      2021年度精密工学会春季大会学術講演論文集
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Presentation] ホイール割断におけるホイール押し付け時の亀裂形成挙動に関する研究2021

    • Author(s)
      今井健太郎,浅利朋生,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      日本機械学会2021年度年次大会講演論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] 銀イオンとナトリウムイオンの交互添加によるガラス内電気伝導路の二層化2021

    • Author(s)
      大西皓介,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2021年度精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-20K04190
  • [Presentation] 電圧印加を併用した固体イオン交換法によるガラス内銀析出現象および新たなガラス加工手法の提案2021

    • Author(s)
      川村拓史,大西皓介,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      日本機械学会2021年度年次大会
    • Data Source
      KAKENHI-PROJECT-20K04190
  • [Presentation] ステージ位置制御によるガラス内部への金属球の導入安定化の提案およびレーザ照射条件が与える影響2020

    • Author(s)
      西岡宣泰,比田井洋史,松坂壮太,千葉 明,森田 昇
    • Organizer
      2020年度精密工学会秋季大会学術講演論文集
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Presentation] ダイヤモンド圧子を用いたガラススクラッチ試験方法の検討2020

    • Author(s)
      大宮裕太,松坂壮太,比田井洋史,松本祐一郎,千葉明,森田昇,小林裕介,稲葉誠二
    • Organizer
      2020年砥粒加工学会卒業研究発表会
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] レーザ割断面に生じる段差の発生メカニズムの解明2020

    • Author(s)
      岩月綜志,比田井洋史,松坂壮太,千葉明,森田昇
    • Organizer
      2020年度精密工学会春季大会
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] 2方向レーザ照射によるガラス内部での金属球の分裂2020

    • Author(s)
      今関太一,比田井洋史,松坂壮太,千葉明,森田昇
    • Organizer
      2020年度砥粒加工学会学術講演会講演論文集
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Presentation] Metal sphere separation in glass by the two laser beam illumination2020

    • Author(s)
      Taichi Imazeki, Hirofumi Hidai, Souta Matsusaka, Akira Chiba, Noboru Morita
    • Organizer
      The 7th Optical Manipulation and Structured Materials Conference (OMC2020)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Presentation] SEM内スクライブ装置の開発2020

    • Author(s)
      小川佑太,松坂壮太,比田井洋史,松本祐一郎,千葉明,森田昇
    • Organizer
      2020年砥粒加工学会卒業研究発表会
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] スクライビングホイールの稜角がシリコンの亀裂展挙動に及ぼす影響2020

    • Author(s)
      朝緑紗希,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2020年度精密工学会卒業研究発表会
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] レーザ照射によりガラス内部に導入される金属球の直径制御および導入可能な金属拡充2020

    • Author(s)
      福嶋駿太,西岡宣泰,比田井洋史,松坂壮太,千葉明,森田昇
    • Organizer
      2020年度精密工学会卒業研究発表会
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Presentation] 有限要素法を用いたホイール割断におけるガラス内部の応力解析2020

    • Author(s)
      今井健太郎,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2020年度砥粒加工学会学術講演会講演論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] ガラスのホイール割断において湿度が亀裂進展挙動におよぼす影響2019

    • Author(s)
      染野凌汰,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2019年度砥粒加工学会学術講演会講演論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] ガラスへのホイール割断用工具押付による亀裂生成・進展挙動の観察2019

    • Author(s)
      浅利朋生,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2019年度砥粒加工学会学術講演会講演論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] ガラスのホイール割断時に工具接触部近傍に生じる微小欠陥に関する研究2019

    • Author(s)
      齊藤雅裕,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2019年度精密工学会春季大会学術講演論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] 金/ガラス陽極接合界面への逆電圧印加による亀裂生成と金移動に関する現象の解明とガラス加工への応用2019

    • Author(s)
      川村拓史,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      日本表面真空学会 2019年度関東支部学術講演大会
    • Data Source
      KAKENHI-PROJECT-18K18800
  • [Presentation] Investigation of moving metal particles in a glass laser irradiated - The influence of moving velocity on the characteristics of the trajectory2019

    • Author(s)
      Kentaro Imai, Masahiro Saito, Yuichiro Matsumoto, Souta Matsusaka, Hirofumi Hidai, Akira Chiba and Noboru Morita,
    • Organizer
      2019 International Conference on Smart Science (ICSS 2019)
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] ピコ秒パルスレーザによるダイヤモンドの内部変質の研究2019

    • Author(s)
      佐藤正隆,比田井洋史, 松坂壮太,千葉明,森田昇
    • Organizer
      2019年度精密工学会卒業研究発表会発表論文集
    • Data Source
      KAKENHI-PROJECT-17K18820
  • [Presentation] ホイール割断における荷重負荷時のガラス内部応力推定2019

    • Author(s)
      今井健太郎,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2019年度砥粒加工学会学術講演会講演論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] ガラス中の金属球マニピュレーションにおける金属球移動軌跡の光学分析2019

    • Author(s)
      今関太一,比田井洋史,松坂壮太,千葉明,森田昇
    • Organizer
      2019年度砥粒加工学会学術講演会
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Presentation] 薄板ガラスのホイール割断における亀裂形成・進展挙動の観察2019

    • Author(s)
      浅利朋生,今井健太郎,松本祐一郎,松坂壮太,比田井洋史,千葉 明,森田 昇
    • Organizer
      日本機械学会関東支部第22期総会・講演会
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] A novel method of triggering fiber fuse inside glass by breakdown2019

    • Author(s)
      Daijiro Tokunaga, Shun Sato, Hirofumi Hidai, Souta Matsusaka, Akira Chiba, Noboru Morita
    • Organizer
      2019 International Conference on Smart Science (ICSS 2019)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K06004
  • [Presentation] ガラスのレーザ割断における光弾性法による内部応力の検討2019

    • Author(s)
      岩月綜志,比田井洋史,松坂壮太,千葉 明,森田 昇
    • Organizer
      2019年度砥粒加工学会学術講演会講演論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] ガラス内部の金属球へのレーザ照射による微粒子の吸引2019

    • Author(s)
      今井拓哉,比田井洋史,松坂壮太,千葉明,森田昇
    • Organizer
      日本機械学会第13回生産加工・工作機械部門講演会
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Presentation] Mass transfer and composition change during metal sphere migration in glass by continuous laser illumination2019

    • Author(s)
      Takuya Imai, Shuko Yoshimura, Hirofumi Hidai, Tetsuo Kishi, Souta Matsusaka, Akira Chiba, Noboru Morita
    • Organizer
      The 6th Optical Manipulation and Structured Materials Conference
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H02035
  • [Presentation] ガラスのホイール割断において加工雰囲気が亀裂進展挙動に及ぼす影響2019

    • Author(s)
      染野凌汰,齊藤雅裕,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      日本表面真空学会 2019年度関東支部講演大会
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] A study of fracture surface generation in wheel cleaving2019

    • Author(s)
      Kentaro Imai, Masahiro Saito, Yuichiro Matsumoto, Souta Matsusaka, Hirofumi Hidai, Akira Chiba and Noboru Morita,
    • Organizer
      2019 International Conference on Smart Science (ICSS 2019)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] 金/ガラス陽極接合界面への逆電圧印加による亀裂生成および金の移動現象の解明2018

    • Author(s)
      川村拓史,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2018年度精密工学会秋季大会
    • Data Source
      KAKENHI-PROJECT-18K18800
  • [Presentation] A Study of Generation Mechanism of Fracture Surface in the Wheel Cleaving2018

    • Author(s)
      Kentaro Imai, Masahiro Saito, Yuichiro Matsumoto, Souta Matsusaka, Hirofumi Hidai, Akira Chiba and Noboru Morita,
    • Organizer
      ICPE 2018 (17th International Conference on Precision Engineering)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] ホイール割断における割断条件が割断面形態に及ぼす影響2018

    • Author(s)
      今井健太郎,齊藤雅裕,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2018年度砥粒加工学会学術講演会講演論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] 金/ガラス陽極接合界面への逆電圧印加による亀裂生成と金の移動を利用したガラス分離加工法の提案2018

    • Author(s)
      川村拓史,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      日本機械学会 第12回生産加工・工作機械部門講演会
    • Data Source
      KAKENHI-PROJECT-18K18800
  • [Presentation] ホイール割断における工具形状が割断面形態に及ぼす影響2018

    • Author(s)
      今井健太郎,齊藤雅裕,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2018年度精密工学会秋季大会学術講演論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] Formation of embedded silver wiring in glass substrate by field-assisted solid-state ion exchange2018

    • Author(s)
      Souta Matsusaka, Kawamura Hirofumi, Hidai Hirofumi, Chiba Akira, Morita Noboru
    • Organizer
      International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications (Thermec2018)
    • Data Source
      KAKENHI-PROJECT-15K05712
  • [Presentation] 固体イオン交換法によるガラス中での金析出メカニズムの検討とガラスの分離加工への応用2018

    • Author(s)
      川村拓史,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2018年度精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-15K05712
  • [Presentation] 薄板ガラスのホイール割断における亀裂進展挙動と割断面形成メカニズムに関する研究2018

    • Author(s)
      松坂壮太,浅利朋生,染野凌汰,阿隅結夢,今井健太郎,齊藤雅裕,長谷川良平,松本祐一郎,比田井洋史,千葉明,森田昇
    • Organizer
      第18回国際工作機械技術者会議論文集
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] Observation of Crack Formation Using High-speed Camera During Wheel Scribing of Glass Sheet2018

    • Author(s)
      Kentaro Imai, Souta Matsusaka, Hirofumi Hidai, Akira Chiba, Noboru Morita
    • Organizer
      2018 International Conference on Smart Science (ICSS 2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03898
  • [Presentation] Formation of Buried Electric Circuit in Glass by Metal Doping Using Forward/Reverse Voltage Application2018

    • Author(s)
      Hirofumi Kawamura, Souta Matsusaka, Hirofumi Hidai, Akira Chiba, Noboru Morita
    • Organizer
      2018 International Conference on Smart Science (ICSS 2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K05712
  • [Presentation] Observation of wheel scribing behavior using Scanning Electron Microscope2018

    • Author(s)
      Masahiro Saito, Kentaro Imai, Yuichiro Matsumoto, Souta Matsusaka, Hirofumi Hidai, Akira Chiba and Noboru Morita,
    • Organizer
      ICPE 2018 (17th International Conference on Precision Engineering)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H03749
  • [Presentation] 順電圧/逆電圧印加を用いたガラス内への金属添加による電気伝導路形成2017

    • Author(s)
      川村拓史,松坂壮太,比田井洋史,千葉 明,森田 昇
    • Organizer
      2017年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-15K05712
  • [Presentation] Formation of multi layer structure in borosilicate glass by electric field-assisted solid-state ion exchange2017

    • Author(s)
      Ryuta Suzuki, Souta Matsusaka, Hirofumi Hidai, Akira Chiba and Noboru Morita
    • Organizer
      The 3rd International Conference on Inventions (ICI 2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K05712
  • [Presentation] 薄板ガラスのホイール割断における亀裂形成挙動の観察2017

    • Author(s)
      今井健太郎,齊藤雅裕,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2017年度砥粒加工学会学術講演会
    • Data Source
      KAKENHI-PROJECT-15H03898
  • [Presentation] 薄板ガラスのホイール割断における亀裂生成・進展挙動に関する研究2017

    • Author(s)
      長谷川良平,今井健太郎,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2017年精密工学会秋季大会
    • Place of Presentation
      慶應義塾大学 理工学部 矢上キャンパス
    • Year and Date
      2017-03-15
    • Data Source
      KAKENHI-PROJECT-15H03898
  • [Presentation] Fabrication of micro-scale grooves in glass using a non-rigid cutting mechanism -Application of a force feedback control system-2017

    • Author(s)
      Herrera-Granados German, Ashida Kiwamu, Ogura Ichiro, Okazaki Yuichi, Morita Noboru, Hidai Hirofumi, Matsusaka Souta and Chiba Akira
    • Organizer
      2017年度精密工学会春季大会学術講演会
    • Place of Presentation
      慶応義塾大学、横浜市
    • Year and Date
      2017-03-13
    • Data Source
      KAKENHI-PROJECT-26289022
  • [Presentation] 走査型電子顕微鏡(SEM)を用いたガラス基板のスクライブ加工プロセスの観察2017

    • Author(s)
      齊藤雅裕,松本祐一郎,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2017年度砥粒加工学会学術講演会
    • Data Source
      KAKENHI-PROJECT-15H03898
  • [Presentation] Processing of diamond by laser-induced graphitization and selective chemical etching2017

    • Author(s)
      Haruna Hirai, Hirofumi Hidai, Souta Matsusaka, Akira Chiba, Noboru Morita
    • Organizer
      the 3rd International Conference on Inventions (ICI 2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-17K18820
  • [Presentation] Precipitation process of silver nanowire in borosilicate glass by solid-state ion exchange assisted with forward and reverse electric fields2016

    • Author(s)
      Souta Matsusaka, Hiroki Aoyama, Hirofumi Hidai, Akira Chiba, Noboru Morita
    • Organizer
      International Conference on Processing & Manufacturing of Advanced Materials
    • Place of Presentation
      Graz, Austria
    • Year and Date
      2016-06-03
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K05712
  • [Presentation] Advantages of using a non-rigid cutting mechanism for the machining of glass2016

    • Author(s)
      Herrera-Granados German, Ashida Kiwamu, Ogura Ichiro, Okazaki Yuichi, Morita Noboru, Hidai Hirofumi, Matsusaka Souta and Chiba Akira
    • Organizer
      4M/IWMF2016 Conference
    • Place of Presentation
      DTU, Copenhagen, Denmark
    • Year and Date
      2016-09-13
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26289022
  • [Presentation] 偏光高速度カメラによる薄板ガラスのホイール割断時の位相差計測2016

    • Author(s)
      長谷川良平,松坂壮太,比田井洋史,千葉明,森田昇
    • Organizer
      2016年砥粒加工学会学術講演会
    • Place of Presentation
      兵庫県立大学 姫路環境人間キャンパス
    • Year and Date
      2016-09-01
    • Data Source
      KAKENHI-PROJECT-15H03898
  • [Presentation] ガラス中での金属層形成に関する研究2015

    • Author(s)
      青山拓樹,松坂壮太,比田井洋史,千葉 明,森田 昇
    • Organizer
      2015年精密工学会秋季大会
    • Place of Presentation
      東北大学川内キャンパス
    • Year and Date
      2015-09-06
    • Data Source
      KAKENHI-PROJECT-15K05712
  • [Presentation] Fabrication of mcro-scale grooves in glass using a non-rigid cutting mechanism2015

    • Author(s)
      German Herrera-Granados, Kiwamu Ashida, Ichiro Ogura, Yuichi Okazaki, Noboru Morita, Hidai Hirofumi, Souta Matsusaka and Akira Chiba
    • Organizer
      2015年度精密工学会秋季大会学術講演会
    • Place of Presentation
      東北大学(宮城県仙台市)
    • Year and Date
      2015-09-04
    • Data Source
      KAKENHI-PROJECT-26289022
  • [Presentation] 偏光高速度カメラを用いた薄板ガラスのホイール割断時におけるガラス内部の位相差計測2015

    • Author(s)
      長谷川良平,松坂壮太,比田井洋史,千葉 明,森田 昇
    • Organizer
      2015年精密工学会秋季大会
    • Place of Presentation
      東北大学川内キャンパス
    • Year and Date
      2015-09-04
    • Data Source
      KAKENHI-PROJECT-15H03898
  • [Presentation] TEM observation of metal nanoparticles in borosilicate glass doped by field-assisted ion exchange2013

    • Author(s)
      T. NOMURA, S. MATSUSAKA, H. HIDAI, N. MORITA and A. CHIBA
    • Organizer
      International Symposium on Interfacial Joining and Surface Technology (JST2013)
    • Place of Presentation
      Osaka University
    • Data Source
      KAKENHI-PROJECT-24560125
  • [Presentation] 加工用AFMカンチレバーを用いた高能率微細加工に関する研究2013

    • Author(s)
      園部修也, 高野登, 山田茂, 森田昇
    • Organizer
      2013年度精密工学会春期大会学術講演論文集
    • Place of Presentation
      東京都目黒区
    • Year and Date
      2013-03-13
    • Data Source
      KAKENHI-PROJECT-23360067
  • [Presentation] CWレーザ背面照射法(CW-LBI)によるガラス内部の金属微粒子の移動メカニズムの検討2013

    • Author(s)
      松下真,比田井洋史,松坂壮太,森田昇
    • Organizer
      2013年度精密工学会春期大会学術講演論文集
    • Place of Presentation
      東京都目黒区
    • Year and Date
      2013-03-13
    • Data Source
      KAKENHI-PROJECT-24656096
  • [Presentation] CWレーザ背面照射法(CW-LBI)によるガラス内部の金属微粒子の移動メカニズムの検討2013

    • Author(s)
      松下 真,比田井洋史,松坂壮太,森田 昇
    • Organizer
      2013年度精密工学会春期大会学術講演論文集
    • Place of Presentation
      東京工業大学
    • Data Source
      KAKENHI-PROJECT-24656096
  • [Presentation] 旋削加工における背分力制御に関する研究2013

    • Author(s)
      山崎行浩,森田昇,比田井洋史,松坂壮太
    • Organizer
      2013年度精密工学会卒業研究発表会発表論文集
    • Place of Presentation
      東京工業大学
    • Data Source
      KAKENHI-PROJECT-23360067
  • [Presentation] 集束イオンビーム (FIB) を用いたダイヤモンド切削工具の作製とその切削加工特性2013

    • Author(s)
      庭田智行, 川堰宣隆, 森田昇, 西村一仁,笹岡秀紀
    • Organizer
      2013年度精密工学会春期大会学術講演論文集
    • Place of Presentation
      東京都目黒区
    • Year and Date
      2013-03-13
    • Data Source
      KAKENHI-PROJECT-23360067
  • [Presentation] CWレーザ背面照射法(CW-LBI)によるガラス内部を移動する金属微粒子の観察2012

    • Author(s)
      松下真,比田井洋史,松坂壮太,森田昇
    • Organizer
      2012年度精密工学会秋季大会学術講演論文集
    • Place of Presentation
      福岡県北九州市
    • Year and Date
      2012-09-14
    • Data Source
      KAKENHI-PROJECT-24656096
  • [Presentation] CWレーザ背面照射法(CW-LBI)によるガラス内部を移動する金属微粒子の観察2012

    • Author(s)
      松下真,比田井洋史,松坂壮太,森田昇
    • Organizer
      2012年度精密工学会秋季大会学術講演論文集
    • Place of Presentation
      九州工業大学
    • Data Source
      KAKENHI-PROJECT-24656096
  • [Presentation] マイクロダイヤモンドツールによる単結晶シリコンのマイクロ加工2008

    • Author(s)
      稲垣清紀、森田昇、山田茂、高野登、大山達雄
    • Organizer
      砥粒加工学会北信越ハイテク加工研究分科会2008年度研究・開発成果発表会
    • Place of Presentation
      金沢工業大学
    • Year and Date
      2008-07-04
    • Data Source
      KAKENHI-PROJECT-20360067
  • [Presentation] 集束イオンビーム照射と化学エッチングを併用した極微細加工(第3報)-微細構造形成の高能率化-2007

    • Author(s)
      深瀬, 川堰, 森田, 高野, 芦田, 谷口, 宮本, 百田
    • Organizer
      2007年度砥粒加工学会学術講演会
    • Place of Presentation
      東京工業大学
    • Year and Date
      2007-09-07
    • Data Source
      KAKENHI-PROJECT-18656045
  • [Presentation] 固体イオン交換法によるレーザ加工用ガラスの開発

    • Author(s)
      野村孟嗣,松坂壮太,比田井洋史,森田昇,千葉明
    • Organizer
      20th Symposium on Microjoining and Assembly Technology in Electronics
    • Place of Presentation
      パシフィコ横浜
    • Data Source
      KAKENHI-PROJECT-24560125
  • [Presentation] Estimation of the cantilever beam bending of a non-rigid cutting mechanism used for the fabrication of micro-grooves

    • Author(s)
      German Herrera-Granados, Kiwamu Ashida, Ichiro Ogura, Yuichi Okazaki, Noboru Morita, Hidai Hirofumi, Souta Matsusaka, Akira Chiba
    • Organizer
      15th International Conference on Precision Engineering
    • Place of Presentation
      Kanazawa, Japan
    • Year and Date
      2014-07-23 – 2014-07-25
    • Data Source
      KAKENHI-PROJECT-26289022
  • [Presentation] 金属添加ガラス中の金属微粒子の存在形態に関する研究

    • Author(s)
      野村孟嗣,小早川友子,松坂壮太,比田井洋史,森田昇
    • Organizer
      日本機械学会 第20回機械材料・材料加工技術講演会
    • Place of Presentation
      大阪
    • Data Source
      KAKENHI-PROJECT-24560125
  • [Presentation] Effect of cutting angles during the micro-groove fabrication process using a non-rigid cutting mechanism

    • Author(s)
      German Herrera-Granados, Kiwamu Ashida, Ichiro Ogura, Yuichi Okazaki, Noboru Morita, Hidai Hirofumi, Souta Matsusaka, Akira Chiba
    • Organizer
      9th International Workshop on Microfactories
    • Place of Presentation
      Honolulu, Hawaii, USA
    • Year and Date
      2014-10-05 – 2014-10-08
    • Data Source
      KAKENHI-PROJECT-26289022
  • [Presentation] 金属添加ガラス中の金属微粒子の存在形態に関する研究

    • Author(s)
      野村孟嗣,松坂壮太,比田井洋史,千葉 明,森田 昇
    • Organizer
      2014年精密工学会春季大会
    • Place of Presentation
      東京大学
    • Data Source
      KAKENHI-PROJECT-24560125
  • 1.  SOUTA Matsusaka (30334171)
    # of Collaborated Projects: 13 results
    # of Collaborated Products: 83 results
  • 2.  HIDAI Hirofumi (60313334)
    # of Collaborated Projects: 13 results
    # of Collaborated Products: 83 results
  • 3.  YOSHIDA Yoshitaro (80174960)
    # of Collaborated Projects: 6 results
    # of Collaborated Products: 0 results
  • 4.  YAMADA Shigeru (00174714)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 1 results
  • 5.  TAKANO Noboru (60251881)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 1 results
  • 6.  岸 哲生 (90453828)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 3 results
  • 7.  MATSUSAKA Souta (31334171)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 8.  ASHIDA Kiwamu (10356363)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 8 results
  • 9.  SAKAMOTO Haruhisa (40276514)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 10.  SHIMIZU Shinji (70146801)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 11.  MORONUKI Nobuyuki (90166463)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 12.  FURUKAWA Yuji (10087190)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 13.  NAKAO Masayuki (90242007)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 14.  HAMAGUCHI Tetsuya (90345083)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 15.  TSUCHIYA Kensuke (80345173)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 16.  小倉 一朗 (60356714)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 8 results
  • 17.  大井 健 (00345084)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 18.  HERRERA-GRANADOS German
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 8 results
  • 19.  CHIBA Akira
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 9 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi