EGAWA Motoo 榮川元雄

… Alternative Names

榮川元雄エガワモトオ

Less

Researcher Number	30359426
Affiliation (Current)	2025: 地方独立行政法人大阪産業技術研究所, 和泉センター, 主幹研究員 2025: 地方独立行政法人大阪府立産業技術総合研究所, その他部局等, 主任研究員
Affiliation (based on the past Project Information) *help	2020 – 2022: 地方独立行政法人大阪産業技術研究所, 和泉センター, 主幹研究員 2018 – 2019: 地方独立行政法人大阪産業技術研究所, 和泉センター, 主任研究員 2013: 地方独立行政法人大阪府立産業技術総合研究所, 金属表面処理科, 主任研究員
Review Section/Research Field	Except Principal Investigator Basic Section 26050:Material processing and microstructure control-related / Material processing/treatments
Keywords	Except Principal Investigator 積層造形 / 複合材料 / 低温浸炭処理 / 低温窒化処理 / レーザクラッド / 耐腐食 / 耐摩耗 / タングステンカーバイド / オーステナイト系ステンレス鋼 / レーザメタルデポジション … More / 低温プラズマ浸炭処理 / 低温プラズマ窒化処理 / DLC / 耐摩耗性 / 窒化 / 浸炭 / ステンレス鋼 / 表面処理 / プラズマ / 耐食性 / 硬さ / 表面改質 / 拡散 / オーステナイトステンレス鋼 / surface hardening / carburizing / nitriding / stainless steel / S phase / plasma Less

Investigation of S-phase on ceramics composite additive manufacturing by low-temperature plasma treatment
- Principal Investigator
  
  Adachi Shinichiro
- Project Period (FY)
  2018 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Osaka Research Institute of Industrial Science and Technology
Surface structure control of ferrous materials by non-equilibrium phases of low temperature plasma treatment
- Principal Investigator
  
  TSUJIKAWA Masato
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Osaka Prefecture University

All 2020 2019 2013 2012 2011

All Journal Article Presentation

[Journal Article] Low-Temperature Plasma Nitriding for Austenitic Stainless Steel Layers with Various Nickel Contents Fabricated via Direct Laser Metal Deposition2020
- Author(s)
  Shinichiro Adachi , Motoo Egawa, Takuto Yamaguchi and Nobuhiro Ueda
- Journal Title
  
  coatings
  
  Volume: 10 Issue: 4 Pages: 365-375
- DOI
  10.3390/coatings10040365
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18K04792
[Journal Article] Modification of S phase on austenitic stainless steel using fine particle shot peening2013
- Author(s)
  Tsujikawa M., Egawa M., Sone T, Ueda N., Okano T., Higashi K.
- Journal Title
  
  Surface and Coatings Technology
  
  Volume: Volume 228, Supplement 1
- Data Source
  KAKENHI-PROJECT-23560873
[Journal Article] Hardness profile improvement of plasma nitrided high speed steel by glow discharge heating2011
- Author(s)
  M. Tsujikawa, T. Sone, M. Egawa, N. Ueda, K. Higashi
- Journal Title
  
  International Heat Treatment and Surface Engineering
  
  Volume: 5 Pages: 171-174
- Data Source
  KAKENHI-PROJECT-23560873
[Presentation] 溶射とレーザクラッドによるステンレス鋼への低温プラズマ窒化処理2020
- Author(s)
  足立振一郎, 榮川元雄, 山口拓人, 上田順弘
- Organizer
  日本溶射学会第112回全国講演大会
- Data Source
  KAKENHI-PROJECT-18K04792
[Presentation] Low-temperature plasma nitriding and carburizing of high molybdenum stainless-steel with laser cladding2019
- Author(s)
  Shinichiro Adachi, Motoo Egawa, Takuto Yamaguchi, Nobuhiro Ueda
- Organizer
  11th Asia-Pacific International Symposium on the Basics and Applications of Plasma Technology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K04792
[Presentation] Low-temperature plasma nitriding for austenitic stainless steel coatings fabricated by a direct laser metal deposition2019
- Author(s)
  S. Adachi, M. Egawa, T. Yamaguchi, H. Hagino, N. Ueda
- Organizer
  The Joint Conference of XXXIV International Conference on Phenomena in Ionized Gases (XXXIV ICPIG) and the 10th International Conference on Reactive Plasmas (ICRP-10)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K04792
[Presentation] レーザクラッドステンレス鋼への低温プラズマ窒化・浸炭処理におけるニッケルの影響2019
- Author(s)
  足立振一郎, 榮川元雄, 山口拓人, 上田順弘
- Organizer
  日本溶射学会第110回全国講演大会
- Data Source
  KAKENHI-PROJECT-18K04792
[Presentation] Plasma Treatment for Removing the Excess Carburized Layer formed on S-phase2013
- Author(s)
  Motoo Egawa, Nobuhiro Ueda, Masato Tsujikawa
- Organizer
  The 9th Asian-European International Conference on Plasma Surface Engineering
- Place of Presentation
  Jeju, Korea
- Data Source
  KAKENHI-PROJECT-23560873
[Presentation] Plasma Treatment for Removing the Excess Carburized Layer Formed on S-phase2013
- Author(s)
  Motoo EGAWA, Nobuhiro UEDA, Masato TSUJIKAWA
- Organizer
  The 9th Asian-European International Conference on Plasma Surface Engineering
- Place of Presentation
  Jeju, Korea
- Data Source
  KAKENHI-PROJECT-23560873
[Presentation] DLC coating on low temperature plasma nitrided or carburized austenitic stainless steel2012
- Author(s)
  Masato Tsujikawa, Motoo Egawa, Nobuhiro Ueda, Takumi Sone, Kazuo Murata, Kenji Higashi
- Organizer
  13th International Conference on Plasma Surface Engineering
- Place of Presentation
  Garmisch-Partenkirchen, Germany
- Data Source
  KAKENHI-PROJECT-23560873
[Presentation] Anti Chipping Treatment of Nitrided High-Speed Steel by Plasma Bombardment2012
- Author(s)
  Masato TSUJIKAWA, Takumi SONE, Motoo EGAWA, Nobuhiro UEDA, Kenji HIGASHI, Kazuhiro NAKATA
- Organizer
  International Sympo. on Visualization in Joining & Welding Science
- Place of Presentation
  Osaka, Japan
- Data Source
  KAKENHI-PROJECT-23560873
[Presentation] Effect on Corrosion Resistance of Particle Polishing as Post-treatment of S phase2011
- Author(s)
  Takumi Sone, Masato Tsujikawa, Motoo Egawa, Nobuhiro Ueda, Mitsuo Murata, Kenji Higashi
- Organizer
  The 8th Asian-European International Conference on Plasma Surface Engineering
- Place of Presentation
  中国大連市
- Data Source
  KAKENHI-PROJECT-23560873
[Presentation] Hardness Profile Improvement of Plasma Nitrided High- Speed Steel by Glow Discharge Heating, Hardness Profile Improvement of Plasma Nitrided High- Speed Steel by Glow Discharge Heating2011
- Author(s)
  Masato Tsujikawa, Takumi Sone, Motoo Egawa, Nobuhiro Ueda, Kenji Higashi
- Organizer
  International Federation of Heat Treatment and Surface Engineering 19th International Congress 2011
- Place of Presentation
  Glasgow, Scotland
- Data Source
  KAKENHI-PROJECT-23560873
[Presentation] Modification of S Phase by Fine Particle Shot Peening2011
- Author(s)
  Masato Tsujikawa, Motoo Egawa, Takumi Sone, Nobuhiro Ueda, Toshiyuki Okano, Kenji Higashi
- Organizer
  The 8th Asian-European International Conference on Plasma Surface Engineering
- Place of Presentation
  中国大連市
- Data Source
  KAKENHI-PROJECT-23560873
[Presentation] Modification of S Phase by Fine Particle Shot Peening2011
- Author(s)
  Masato Tsujikawa, Motoo Egawa, Takumi Sone, Nobuhiro Ueda, Toshiyuki Okano, Kenji Higashi
- Organizer
  The 8th Asian- European International Conference on Plasma Surface Engineering
- Place of Presentation
  大連,中国
- Data Source
  KAKENHI-PROJECT-23560873
[Presentation] Effect on Corrosion Resistance of Particle Polishing as Post- treatment of S phase2011
- Author(s)
  Takumi Sone, Masato Tsujikawa, Motoo Egawa, Nobuhiro Ueda, Mitsuo Murata, Kenji Higashi
- Organizer
  The 8th Asian- European International Conference on Plasma Surface Engineering
- Place of Presentation
  大連,中国
- Data Source
  KAKENHI-PROJECT-23560873
[Presentation] Hardness Profile Improvement of Plasma Nitrided High-Speed Steel by Glow Discharge Heating2011
- Author(s)
  Masato Tsujikawa, Takumi Sone, Motoo Egawa, Nobuhiro Ueda, Kenji Higashi
- Organizer
  International Federation of Heat Treatment and Surface Engineering 19th International Congress 2011
- Place of Presentation
  スコットランドグラスゴー
- Data Source
  KAKENHI-PROJECT-23560873

1. UEDA Nobuhiro (90359365)

# of Collaborated Projects: 2 results

# of Collaborated Products: 17 results
2. TSUJIKAWA Masato (90172006)

# of Collaborated Projects: 1 results

# of Collaborated Products: 12 results
3. Adachi Shinichiro (50359410)

# of Collaborated Projects: 1 results

# of Collaborated Products: 5 results
4. 山口拓人 (20530041)

# of Collaborated Projects: 1 results

# of Collaborated Products: 5 results
5. 萩野秀樹 (90359422)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results

EGAWA Motoo 榮川 元雄

榮川 元雄 エガワ モトオ

Research Projects

Research Products

Co-Researchers

Investigation of S-phase on ceramics composite additive manufacturing by low-temperature plasma treatment

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Surface structure control of ferrous materials by non-equilibrium phases of low temperature plasma treatment

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Low-Temperature Plasma Nitriding for Austenitic Stainless Steel Layers with Various Nickel Contents Fabricated via Direct Laser Metal Deposition2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Modification of S phase on austenitic stainless steel using fine particle shot peening2013

Author(s)

Journal Title

Data Source

[Journal Article] Hardness profile improvement of plasma nitrided high speed steel by glow discharge heating2011

Author(s)

Journal Title

Data Source

[Presentation] 溶射とレーザクラッドによるステンレス鋼への低温プラズマ窒化処理2020

Author(s)

Organizer

Data Source

[Presentation] Low-temperature plasma nitriding and carburizing of high molybdenum stainless-steel with laser cladding2019

Author(s)

Organizer

Data Source

[Presentation] Low-temperature plasma nitriding for austenitic stainless steel coatings fabricated by a direct laser metal deposition2019

Author(s)

Organizer

Data Source

[Presentation] レーザクラッドステンレス鋼への低温プラズマ 窒化・浸炭処理におけるニッケルの影響2019

Author(s)

Organizer

Data Source

[Presentation] Plasma Treatment for Removing the Excess Carburized Layer formed on S-phase2013

Author(s)

Organizer

Place of Presentation

Data Source

[Presentation] Plasma Treatment for Removing the Excess Carburized Layer Formed on S-phase2013

Author(s)

Organizer

Place of Presentation

Data Source

[Presentation] DLC coating on low temperature plasma nitrided or carburized austenitic stainless steel2012

Author(s)

Organizer

Place of Presentation

Data Source

[Presentation] Anti Chipping Treatment of Nitrided High-Speed Steel by Plasma Bombardment2012

Author(s)

Organizer

Place of Presentation

Data Source

[Presentation] Effect on Corrosion Resistance of Particle Polishing as Post-treatment of S phase2011

Author(s)

Organizer

Place of Presentation

Data Source

[Presentation] Hardness Profile Improvement of Plasma Nitrided High- Speed Steel by Glow Discharge Heating, Hardness Profile Improvement of Plasma Nitrided High- Speed Steel by Glow Discharge Heating2011

Author(s)

Organizer

Place of Presentation

Data Source

[Presentation] Modification of S Phase by Fine Particle Shot Peening2011

Author(s)

Organizer

Place of Presentation

EGAWA Motoo 榮川元雄

榮川元雄エガワモトオ

[Presentation] レーザクラッドステンレス鋼への低温プラズマ窒化・浸炭処理におけるニッケルの影響2019