Yamamoto Go 山本剛

… Alternative Names

YAMAMOTO Go 山本剛

山本剛ヤマモトゴウ

Less

Researcher Number	30436159
Other IDs	https://orcid.org/0000-0001-7983-729X
Affiliation (Current)	2024: 東北大学, 工学研究科, 准教授
Affiliation (based on the past Project Information) *help	2022 – 2024: 東北大学, 工学研究科, 准教授 2016 – 2020: 東北大学, 工学研究科, 准教授 2016 – 2017: 東北大学, 大学院工学研究科, 准教授 2015: 東北大学, 工学(系)研究科(研究院), 准教授 2011 – 2014: 東北大学, 工学(系)研究科(研究院), 助教 … More 2013: 東北大学, 大学院工学研究科, 助教 2011: 東北大学, 大学院・工学研究科, 助教 2008: 東北大, 流体科学研究所 2007: Tohoku University, 流体科学研究所, COEフェロー Less
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Basic Section 18010:Mechanics of materials and materials-related / Basic Section 26030:Composite materials and interfaces-related / Inorganic materials/Physical properties Except Principal Investigator Materials/Mechanics of materials
Keywords	Principal Investigator 複合材料 / カーボンナノチューブ / セラミックス / 力学的特性 / 構造制御 / 電磁波吸収特性 / 機械的特性 / マルチスケールメカニクス / 多層カーボンナノチューブ / マトリックス樹脂 … More / 繊維強化複合材料 / 強度予測 / 数値解析 / フラグメンテーション試験 / 自己組織化マップ / 応力集中 / 引張強度予測 / 炭素繊維強化プラスチック / 分子動力学 / 機械材料・材料力学 / トライボロジー / 高靭性化 / ナノ欠陥導入法 / 前駆体法 … More Except Principal Investigator セラミックス / 焼結 / 焼結助剤 / トライボロジー特性 / 高温特性 / 評価 / 物性 / プロセス / 材料設計 / カーボンナノチュブ / ナノ欠陥 / 前駆体法 / 強度・靱性 / 強度・靭性 / 機械材料・材料力学 / 電波吸収特性 / トライボ特性 / 強度・破壊靭性 / 機械・電気的特性 / 材料設計・プロセス・評価 / 複合材料 / カーボンナノチューブ Less

Multiscale Mechanics of MWCNT Reinforced Composite MaterialsPrincipal Investigator
- Principal Investigator
  
  山本剛
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Tohoku University
Development for polymer matrix selection guide for carbon fiber reinforced plastic compositesPrincipal Investigator
- Principal Investigator
  
  Yamamoto Go
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26030:Composite materials and interfaces-related
- Research Institution
  Tohoku University
Preparation of Novel Silicon Nitride Ceramics Using Non-oxide Sintering Agents and Their Applications for Structural/Functional Materials
- Principal Investigator
  
  Hashida Toshiyuki
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University
Structural modification of multi-walled carbon nanotube: Is multi-walled carbon nanotube acceptable as a reinforcing agent in fiber-reinforced composites?Principal Investigator
- Principal Investigator
  
  Yamamoto Go
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Young Scientists (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University
Development of novel electromagnetic absorbers - Effects of MWCNT diameter and dispersion state of MWCNT -Principal Investigator
- Principal Investigator
  
  Yamamoto Go
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University
Development of novel electromagnetic absorbers using carbon nanotube/alumina compositesPrincipal Investigator
- Principal Investigator
  
  YAMAMOTO Go
- Project Period (FY)
  2012 – 2013
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University
ナノスケール構造制御による高機能CNT／セラミックス複合材料の実用化手法開発Principal Investigator
- Principal Investigator
  
  山本剛
- Project Period (FY)
  2011 – 2012
- Research Category
  
  Grant-in-Aid for Research Activity Start-up
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University
Development of Design-Fabrication-Evaluation Methodology for High Performance Composites Reinforced by Carbon Nanotube
- Principal Investigator
  
  HASHIDA Toshiyuki
- Project Period (FY)
  2009 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (S)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University
炭素ナノ材料を用いた革新的シナジーセラミックス創製法の開発Principal Investigator
- Principal Investigator
  
  山本剛
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Inorganic materials/Physical properties
- Research Institution
  Tohoku University

[Book] Tensile Strength of Unidirectional Carbon Fiber-Reinforced Plastic Composites2020
- Author(s)
  Go Yamamoto, Keita Koizumi, Tomonaga Okabe
- Total Pages
  12
- Publisher
  InTech open access publisher
- ISBN
  9781789859942
- Data Source
  KAKENHI-PROJECT-18K04721
[Book] 空飛ぶクルマ　空のモビリティ革命に向けた開発最前線　第４章第１節　CFRP の軽量化へのアプローチ2020
- Author(s)
  山本剛
- Total Pages
  322
- Publisher
  (株)エヌ・ティー・エス
- ISBN
  4860436784
- Data Source
  KAKENHI-PROJECT-18K04721
[Book] Carbon Nanotubes- Recent Progress2018
- Author(s)
  Keiichi Shirasu, Go Yamamoto, Daniel Nelias，Toshiyuki Hashida
- Publisher
  InTech open access publisher
- ISBN
  9789535157076
- Data Source
  KAKENHI-PROJECT-15H05502
[Book] CNT/エポキシ複合材料を用いた熱バイモルフ2017
- Author(s)
  白須圭一，山本剛，橋田俊之
- Publisher
  シーエムシー出版
- ISBN
  9784781312347
- Data Source
  KAKENHI-PROJECT-15H05502
[Book] Application of aligned carbon nanotube-reinforced polymer composite to electrothermal actuator2016
- Author(s)
  Keiichi Shirasu, Go Yamamoto and Toshiyuki Hashida
- Publisher
  InTech
- Data Source
  KAKENHI-PROJECT-15H05502
[Book] 高分子における劣化・破壊現象の写真・データ事例集～原因特定と対策のために～（第15章，第8節）2014
- Author(s)
  山本剛，白須圭一，野坂陽，橋田俊之
- Publisher
  技術情報協会
- Data Source
  KAKENHI-PROJECT-21226004
[Book] ノチューブ・グラフェン分散技術の工業化と機能展開一溶液・ポリマー・金属・セラミックスへの分散一2014
- Author(s)
  山本剛、白須圭一、野坂陽、Weili Wang、橋田俊之
- Publisher
  S&T出版株式会社
- Data Source
  KAKENHI-PROJECT-21226004
[Book] カーボンナノチューブ・グラフェン分散技術の工業化と機能展開 -溶液・ポリマー・金属・セラミックスへの分散- (第2章，第5節)2014
- Author(s)
  山本剛，白須圭一，野坂陽，Weili Wang，橋田俊之
- Publisher
  S&T出版株式会社
- Data Source
  KAKENHI-PROJECT-21226004
[Book] エレクトロニクス用途におけるコンポジット材料の混練・コンパウンド技術と分散・界面制御2013
- Author(s)
  山本剛,白須圭一,橋田俊之
- Publisher
  (株)技術情報協会
- Data Source
  KAKENHI-PROJECT-21226004
[Book] 【エレクトロニクス用途における】コンポジット材料の混練・コンパウンド技術と分散・界面制御（第10章，第3節）2013
- Author(s)
  山本剛，白須圭一，橋田俊之
- Publisher
  技術情報協会
- Data Source
  KAKENHI-PROJECT-21226004
[Book] Composites and Their Properties2012
- Author(s)
  G. Yamamoto and T. Hashida
- Publisher
  InTech-Open Access Publisher
- URL
  http://dx.doi.org/10.5772/48667
- Data Source
  KAKENHI-PROJECT-21226004
[Book] Composites and Their Properties (Chapter 21: Carbon Nanotube Reinforced Alumina Composite Materials, Composites and Their Properties)2012
- Author(s)
  Go Yamamoto
- Publisher
  Carbon Nanotube Reinforced Alumina Composite Materials, Composites and Their Properties,
- Data Source
  KAKENHI-PROJECT-21226004
[Book] CNT-セラミックス複合材料2008
- Author(s)
  山本剛・大森守・橋田俊之
- Total Pages
  2
- Publisher
  日刊工業新聞社
- Data Source
  KAKENHI-PROJECT-19760462
[Journal Article] Decreasing Vacancy-Defect Sensitivity in Multi-Walled Carbon Nanotubes Through Interwall Coupling2023
- Author(s)
  Go Yamamoto, Yu Chen, Akira Kunitomo, Nozomu Shigemitsu, Tatsunori Shindo
- Journal Title
  
  Carbon Trends
  
  Volume: - Pages: 100266-100266
- DOI
  10.1016/j.cartre.2023.100266
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23K22622
[Journal Article] Tensile-strength-controlling factors in unidirectional carbon fiber reinforced plastic composites2021
- Author(s)
  Yamamoto Go、Koizumi Keita、Nakamura Takahiro、Hirano Noriyuki、Okabe Tomonaga
- Journal Title
  
  Composites Part A: Applied Science and Manufacturing
  
  Volume: 140 Pages: 106140-106140
- DOI
  10.1016/j.compositesa.2020.106140
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K04721
[Journal Article] Considering the stress concentration of fiber surfaces in the prediction of the tensile strength of unidirectional carbon fiber-reinforced plastic composites2019
- Author(s)
  Go Yamamoto, Miho Onodera, Keita Koizumi, Jun Watanabe, Haruki Okuda, Fumihiko Tanaka, and Tomonaga Okabe
- Journal Title
  
  Composites Part A
  
  Volume: 121 Pages: 499-509
- DOI
  10.1016/j.compositesa.2019.04.011
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K04721
[Journal Article] Numerical study for tensile strength prediction of unidirectional carbon fiber-reinforced composite considering fiber surface stress concentration2019
- Author(s)
  Go Yamamoto and Tomonaga Okabe
- Journal Title
  
  Mechanical Engineering Journal
  
  Volume: 6 Issue: 3 Pages: 19-00020-19-00020
- DOI
  10.1299/mej.19-00020
- NAID
  130007663734
- ISSN
  2187-9745
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K04721
[Journal Article] 水潤滑環境下におけるCNT/アルミナ複合材料の摩擦摩耗特性に及ぼすCNT表面修飾の影響に関する研究2018
- Author(s)
  白須圭一，宮浦拓人，山本剛，橋田俊之
- Journal Title
  
  日本機械学会第26回機械材料・材料加工技術講演会論文集
  
  Volume: ー
- NAID
  130007653941
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04228
[Journal Article] Development of large-movements and high-force electrothermal bimorph actuators based on aligned carbon nanotube reinforced epoxy composites2017
- Author(s)
  Shirasu Keiichi、Yamamoto Go、Inoue Yoku、Ogasawara Toshio、Shimamura Yoshinobu、Hashida Toshiyuki
- Journal Title
  
  Sensors and Actuators A: Physical
  
  Volume: 267 Pages: 455-463
- DOI
  10.1016/j.sna.2017.10.051
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06259, KAKENHI-PROJECT-16K20904, KAKENHI-PROJECT-15H05502
[Journal Article] Key factors limiting carbon nanotube strength: Structural characterization and mechanical properties of multi-walled carbon nanotubes2017
- Author(s)
  SHIRASU Keiichi、TAMAKI Itaru、MIYAZAKI Takamichi、YAMAMOTO Go、BEKAREVICH Raman、HIRAHARA Kaori、SHIMAMURA Yoshinobu、INOUE Yoku、HASHIDA Toshiyuki
- Journal Title
  
  Mechanical Engineering Journal
  
  Volume: 4 Issue: 5 Pages: 17-00029-17-00029
- DOI
  10.1299/mej.17-00029
- NAID
  130006943406
- ISSN
  2187-9745
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-16K20904, KAKENHI-PROJECT-15H05502
[Journal Article] Effects of structural defects on strength and fracture properties of multi-walled carbon nanotubes2017
- Author(s)
  玉木格，白須圭一, 宮崎孝道, 山本剛, Raman Bekarevich, 平原佳織, 島村佳伸, 井上翼, 橋田俊之
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 83 Issue: 847 Pages: 16-00283-16-00283
- DOI
  10.1299/transjsme.16-00283
- NAID
  130006943707
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-16K20904, KAKENHI-PROJECT-15H05502
[Journal Article] Friction and wear properties of carbon nanotube/alumina composites under water lubricated conditions2017
- Author(s)
  Keiichi Shirasu, Takuto Miyaura, Go Yamamoto and Toshiyuki Hashida
- Journal Title
  
  Proceedings of the 21th International Conference on Composite Materials
  
  Volume: -
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04228
[Journal Article] Potential use of CNTs for production of zero thermal expansion coefficient composite materials: An experimental evaluation of axial thermal expansion coefficient of CNTs using a combination of thermal expansion and uniaxial tensile tests2017
- Author(s)
  Keiichi Shirasu, Akihiro Nakamura, Go Yamamoto, Toshio Ogasawara, Yoshinobu Shimamura, Yoku Inoue, Toshiyuki Hashida
- Journal Title
  
  Composites Part A: Applied Science and Manufacturing
  
  Volume: 95 Pages: 152-160
- DOI
  10.1016/j.compositesa.2016.12.027
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-16K20904, KAKENHI-PROJECT-16K06259, KAKENHI-PROJECT-15H05502
[Journal Article] Temperature dependence of axial thermal expansion coefficient of multi-walled carbon nanotubes (A procedure based on measurements of coefficient of thermal expansion for aligned carbon nanotube/epoxy composites)2016
- Author(s)
  白須圭一, 中村彰宏，山本剛, 小笠原俊夫, 島村佳伸, 井上翼, 橋田俊之
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 82 Issue: 844 Pages: 16-00228-16-00228
- DOI
  10.1299/transjsme.16-00228
- NAID
  130006943363
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-16K20904, KAKENHI-PROJECT-15H05502
[Journal Article] Preparation and performance evaluation of electrothermal actuators using aligned carbon nanotube reinforced epoxy composites2016
- Author(s)
  Keiichi Shirasu, Akihiro Nakamura, Go Yamamoto, Toshio Ogasawara, Yoshinobu Shimamura, Yoku Inoue and Toshiyuki Hashida
- Journal Title
  
  Mechanical Engineering Journal
  
  Volume: 3 Issue: 4 Pages: 15-00607-15-00607
- DOI
  10.1299/mej.15-00607
- NAID
  130005169827
- ISSN
  2187-9745
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05502
[Journal Article] Negative axial thermal expansion coefficient of carbon nanotubes: Experimental determination based on measurements of coefﬁcient of thermal expansion for aligned carbon nanotube reinforced epoxy composites2015
- Author(s)
  Keiichi Shirasu, Go Yamamoto, Itaru Tamaki, Toshio Ogasawara, Yoshinobu Shimamura, Yoku Inoue, Toshiyuki Hashida
- Journal Title
  
  Carbon
  
  Volume: 95 Pages: 904-905
- DOI
  10.1016/j.carbon.2015.09.026
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05502
[Journal Article] Relationship between microstructure and mechanical properties in acid-treated carbon nanotube-reinforced alumina composites2015
- Author(s)
  Keiichi Shirasu, Go Yamamoto, Yo Nozaka, Weili Wang, Toshiyuki Hashida
- Journal Title
  
  Journal of Materials Science
  
  Volume: 50 Issue: 20 Pages: 6688-6699
- DOI
  10.1007/s10853-015-9223-6
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26630005
[Journal Article] Effects of processing conditions on microstructure, electrical conductivity and mechanical properties of MWCNT/alumina composites prepared by flocculation2015
- Author(s)
  Weili Wang, Go Yamamoto, Keiichi Shirasu, Yo Nozaka, Toshiyuki Hashida
- Journal Title
  
  Journal of the European Ceramic Society
  
  Volume: 35 Issue: 14 Pages: 3903-3908
- DOI
  10.1016/j.jeurceramsoc.2015.06.027
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630005
[Journal Article] Structure-property relationships in thermally-annealed multi-walled carbon nanotubes2014
- Author(s)
  G. Yamamoto, K. Shirasu, Y. Nozaka, Y. Sato, T. Takagi, T. Hashida
- Journal Title
  
  Carbon
  
  Volume: Vol.66 Pages: 219-226
- DOI
  10.1016/j.carbon.2013.08.061
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004, KAKENHI-PROJECT-23686092, KAKENHI-PROJECT-25630290
[Journal Article] Development of Pressureless Sintering Method for Carbon Nanotube/Alumina Composites and Their Microstructure-Property Relationships2013
- Author(s)
  Go YAMAMOTO, Keiichi SHIRASU, Yo NOZAKA, Takahumi NAKAMURA, Toshiyuki HASHIDA
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 7 Pages: 394-402
- NAID
  130003366878
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] カーボンナノチューブ/アルミナ複合材料の破壊特性に及ぼすカーボンナノチューブのアニール処理の影響2013
- Author(s)
  白須圭一，山本剛，野坂陽，大森守，橋田俊之
- Journal Title
  
  日本機械学会論文集（A編）
  
  Volume: 79 Pages: 706-768
- NAID
  130003374646
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] 常圧焼成法により作製したカーボンナノチューブ/アルミナ複合材料の機械的特性および微細組織評価に関する研究2013
- Author(s)
  野坂陽，山本剛，白須圭一，大森守，高木敏行，橋田俊之
- Journal Title
  
  日本機械学会論文集（A編）
  
  Volume: 79 Pages: 764-768
- NAID
  130003374658
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] Pull-out simulations of a capped carbon nanotube in carbon nanotube-reinforced nanocomposites2013
- Author(s)
  Y. Li, S. Liu, N. Hu, X. Han, L. Zhou, H. Ning, L. Wu, Alamusi, G. Yamamoto, C. Chang, T. Hashida, S. Atobe, H. Fukunaga
- Journal Title
  
  Journal of Applied Physics
  
  Volume: Vol.113(14) Issue: 14
- DOI
  10.1063/1.4800110
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004, KAKENHI-PROJECT-23360376
[Journal Article] Development of Pressureless Sintering Method for Carbon Nanotube/Alumina Composites and Their Microstructure-Property Relationships2013
- Author(s)
  G. Yamamoto, K. Shirasu, Y. Nozaka, T. Nakamura, T. Hashida
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 7 Issue: 3 Pages: 394-402
- DOI
  10.1299/jmmp.7.394
- NAID
  130003366878
- ISSN
  1880-9871
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] Measurements of Carbon Nanotube Tensile Strength and Mechanical Properties of Carbon Nantube/Alumina Composites Prepared by Pressureless Sintering2012
- Author(s)
  G. Yamamoto
- Journal Title
  
  Proc. of 15TH European Conference on Composite Materials (ECCM 15), Venice, Italy, 24-28, June 2012
  
  Volume: 15
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] Prediction of Pull-out Force of Multi-walled Carbon Nanotube (MWCNT) in Sword-in-sheath Mode2012
- Author(s)
  G. Yamamoto, S. Liu, N. Hu, T. Hashida, Y. Liu, C. Yan
- Journal Title
  
  Computational Materials Science
  
  Volume: Vol.60 Pages: 7-12
- DOI
  10.1016/j.commatsci.2012.03.016
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004, KAKENHI-PROJECT-22360044, KAKENHI-PROJECT-23860004
[Journal Article] Influence of the structure of the nanotube on the mechanicalproperties of binder-free multi-walled carbon nanotube solids2012
- Author(s)
  Y.Sato, H.Nishizaka, S.Sawano, A.Yoshinaka, K.Hirano, S.Hashiguchi, T.Arie, S.Akita, G.Yamamoto, T.Hashida, H.Kimura, K.Motomiya, K.Tohji
- Journal Title
  
  Carbon
  
  Volume: 50 Issue: 1 Pages: 34-39
- DOI
  10.1016/j.carbon.2011.07.047
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-19054014, KAKENHI-PROJECT-21226004, KAKENHI-PROJECT-23651082, KAKENHI-PROJECT-23656419, KAKENHI-PROJECT-23686092
[Journal Article] Investigation on CNT/alumina interface properties using molecular mechanics simulations2011
- Author(s)
  S. Liu, N. Hu, G. Yamamoto, Y. Cai, Y. Zhang, Y. Liu, Y. Li, T. Hashida, H. Fukunaga
- Journal Title
  
  Carbon
  
  Volume: Vol.49 Issue: 11 Pages: 3698-3704
- DOI
  10.1016/j.carbon.2011.04.059
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004, KAKENHI-PROJECT-22360044, KAKENHI-PROJECT-23860004
[Journal Article] Nanotube fracture during the failure of carbon nanotube/alumina composites2011
- Author(s)
  Go Yamamoto
- Journal Title
  
  Carbon
  
  Volume: 49 Pages: 3709-3716
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] Nanotube fracture during the failure of carbon nanotube/alumina composites2011
- Author(s)
  G. Yamamoto, K. Shirasu, T. Hashida, T. Takagi, J. Suk, J. An, R. Piner. R. Ruoff
- Journal Title
  
  Carbon
  
  Volume: Vol.49 Issue: 12 Pages: 3709-3716
- DOI
  10.1016/j.carbon.2011.04.022
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004, KAKENHI-PROJECT-23860004
[Journal Article] 単繊維引抜き試験によるカーボンナノチューブ/アルミナ複合材料のクラックブリッジング挙動特性評価2011
- Author(s)
  山本剛, 白須圭一, 高木敏行, 橋田俊之
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 77 Pages: 779-783
- NAID
  130000874068
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23860004
[Journal Article] 単繊維引抜き試験によるカーボンナノチューブ/アルミナ複合材料のクラックブリッジング挙動特性評価2011
- Author(s)
  山本剛
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 77 Pages: 779-783
- NAID
  130000874068
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] ナノ界面制御によるカーボンナノチューブ/アルミナ複合材料の作製とその機械的特性評価(機械的特性に及ぼす焼結助剤の影響評価)2010
- Author(s)
  山本剛, 大森守, 相沢養市, 橋田俊之, 高木敏行
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 76 Pages: 54-56
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] Effects of Sintering Additive on Mechanical Properties of Alumina Matrix Composites Reinforced with Carbon Nanotubes2010
- Author(s)
  G. Yamamoto, M. Omori, T. Hashida, H. Kimura, T. Takagi
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 4 Issue: 3 Pages: 460-469
- DOI
  10.1299/jmmp.4.460
- NAID
  130000255520
- ISSN
  1880-9871
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] The Influence of Nanoscale Defects on the Fracture of Multi-Walled Carbon Nanotubes under Tensile Loading2010
- Author(s)
  G.Yamamoto, J.W.Suk, J.An, R.D.Piner, T.Hashida, T.Takagi, R.S.Ruoff
- Journal Title
  
  Diamond & Related Mater
  
  Volume: 19 Pages: 748-751
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] Effects of Sintering Additive on Mechanical Properties of Alumina Matrix Composites Reinforced with Carbon Nanotubes2010
- Author(s)
  G.Yamamoto, M.Omori, T.Hashida, H.Kimura, T.Takagi
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering 4
  
  Pages: 460-469
- NAID
  130000255520
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] Molecular mechanics simulation of the sliding behavior between nested walls in a multi-walled carbon nanotube2010
- Author(s)
  Y. Li, N. Hu, G. Yamamoto, Z. Wang, T. Hashida, H. Asanuma, C. Dong, T. Okabe, M. Arai, H. Fukunaga
- Journal Title
  
  Carbon
  
  Volume: Vol.48 Issue: 10 Pages: 2934-2940
- DOI
  10.1016/j.carbon.2010.04.031
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] Effects of Sintering Additive on Mechanical Properties of Alumina Matrix Composites Reinforced with Carbon Nanotubes2010
- Author(s)
  Go Yamamoto, Mamoru Omori, Toshiyuki Hashida, Toshiyuki Takagi
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 4 Pages: 460-469
- NAID
  130000255520
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] Preparation and Microstructure of Carbon Nanotube-Toughened Alumina Composites2009
- Author(s)
  G.Yamamoto, T.Hashida, M.Omori, H.Kimura
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering 3
  
  Pages: 85-95
- NAID
  130000667642
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21226004
[Journal Article] Tribological Properties of Single-Walled Carbon Nanotube Solids2008
- Author(s)
  G. Yamamoto. T. Hashida, K. Adachi, T. Takagi
- Journal Title
  
  Journal of Nanoscience and Nanotechnology 8
  
  Pages: 2665-2670
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760462
[Journal Article] Structural characterization and frictional properties of carbon nanotube/alumina composites prepared by precursor method2008
- Author(s)
  G. Yamamoto, M. Omori, K. Yokomizo, T. Hashida, K. Adachi
- Journal Title
  
  Materials Science and Engineering B 148
  
  Pages: 265-269
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760462
[Journal Article] Mechanical Properties of Single-Walled Carbon Nanotube Solids Prepared by Spark Plasma Sintering2007
- Author(s)
  G. Yamamoto, Y. Sato, T. Takahashi, M. Omori, K. Tohji, T. Hashida
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering 1
  
  Pages: 854-863
- NAID
  130000078887
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760462
[Presentation] The role of interwall bridging in the fracture of vacancy-defected carbon nanotubes2022
- Author(s)
  Go Yamamoto
- Organizer
  2nd International Meet & Expo on Graphene and Carbon Nanostructures (GRAPHENEMEET2022)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22622
[Presentation] 共振超音波スペクトロスコピー法を用いた不連続炭素繊維強化熱可塑性複合材料の異方性弾性定数の評価2021
- Author(s)
  山本龍一郎、松井一眞、山本剛
- Organizer
  第12回日本複合材料会議（JCCM-12）
- Data Source
  KAKENHI-PROJECT-18K04721
[Presentation] 共振超音波スペクトロスコピー法を用いた炭素繊維およびその構成材料の弾性定数の評価2021
- Author(s)
  松井一眞、山本剛
- Organizer
  第12回日本複合材料会議（JCCM-12）
- Data Source
  KAKENHI-PROJECT-18K04721
[Presentation] Prediction of Tensile Strength of Unidirectional Carbon-Fiber Reinforced Plastic composites : Experimental and Numerical studies2019
- Author(s)
  Go Yamamoto
- Organizer
  International Conference on Chemical Physics and Material Science (ICCPMS2019)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K04721
[Presentation] 水潤滑環境下におけるCNT/アルミナ複合材料の摩擦摩耗特性に及ぼすCNT表面修飾の影響に関する研究2018
- Author(s)
  白須圭一，宮浦拓人，山本剛，橋田俊之
- Organizer
  日本機械学会第26回機械材料・材料加工技術講演会（M&P2018）
- Data Source
  KAKENHI-PROJECT-16H04228
[Presentation] 一軸引張り試験によるカーボンナノチューブの変形・破壊特性の評価に関する研究2018
- Author(s)
  Luqman Hakim Bin Mat Yusoff，白須圭一，山本剛，橋田俊之
- Organizer
  日本機械学会東北学生会第48回学生員卒業研究発表講演会
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] PREDICTION OF TENSILE STRENGTH OF UNIDIRECTIONAL CARBON FIBER REINFORCED PLASTICS2018
- Author(s)
  Go Yamamoto, Miho Omodera, Jun Watanabe, Haruki Okuda, Fumihiko Tanaka, Tomonaga Okabe
- Organizer
  11th Asian-Australasian Conference on Composite Materials
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K04721
[Presentation] Evaluation of fracture and mechanical properties of carbon nanotubes by means of uniaxial tensile testing method2018
- Author(s)
  Keiichi Shirasu, Luqman Hakim Bin Mat Yusoff , Go Yamamoto, Toshiyuki Hashida
- Organizer
  1st CUHK-TU Joint Workshop on Advanced Materials and Manufacture
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] Evaluation of Tensile properties of Multi-Walled Carbon Nanotubes Synthesized by Chemical Vapor Deposition2017
- Author(s)
  Itaru Tamaki, Keiichi Shirasu, Takamichi Miyazaki, Go Yamamoto, Raman Bekarevich, Kaori Hirahara, Yoshinobu Shimamura, Yoku Inoue and Toshiyuki Hashida
- Organizer
  Asia-Pacific Conference on Fracture and Strength 2016 (APCFS2016)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] Preparation of Multi-Walled Carbon Nanotubes and Evaluation of their Mechanical Properties2017
- Author(s)
  Keiichi Shirasu, Itaru Tamaki, Go Yamamoto and Toshiyuki Hashida
- Organizer
  2nd USTB-TU Joint Workshop on Advanced Materials and Manufacture
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] Friction and wear properties of carbon nanotube/alumina composites under water lubricated conditions,2017
- Author(s)
  Keiichi Shirasu, Takuto Miyaura, Go Yamamoto and Toshiyuki Hashida
- Organizer
  21th International Conference on Composite Materials, Xi’an, China, August 21-25, 2017.
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04228
[Presentation] Friction and wear properties of carbon nanotube/alumina composites under water lubricated conditions2017
- Author(s)
  Keiichi Shirasu, Takuto Miyaura, Go Yamamoto and Toshiyuki Hashida
- Organizer
  21th International Conference on Composite Materials
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] 水潤滑下におけるカーボンナノチューブ/アルミナ複合材料の摩擦・摩耗特性評価に関する研究2017
- Author(s)
  宮浦拓人，中村陽文，白須圭一，山本剛，橋田俊之
- Organizer
  日本機械学会東北学生会第47回学生員卒業研究発表講演会
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] 多層カーボンナノチューブの熱処理による構造制御とその材料特性評価に関する研究2017
- Author(s)
  玉木格，白須圭一，山本剛，橋田俊之
- Organizer
  日本機械学会東北支部　第52期総会・講演会
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] Evaluation of carbon nanotube strength for application to composite materials2017
- Author(s)
  Keiichi Shirasu, Go Yamamoto, Toshiyuki Hashida
- Organizer
  13th International Conference and Exhibition on Advanced Materials and Nanotechnology
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] 配向カーボンナノチューブ/エポキシ複合材料の線膨張係数に及ぼすカーボンナノチューブの結晶性の影響2017
- Author(s)
  白須圭一，玉木格，山本剛，橋田俊之
- Organizer
  第42回複合材料シンポジウム
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] 配向カーボンナノチューブ/エポキシ複合材料を用いた熱駆動バイモルフアクチュエータの開発2017
- Author(s)
  白須圭一，山本剛，橋田俊之
- Organizer
  プラスチック成形加工学会　第28回年次大会
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] 配向カーボンナノチューブ/エポキシ複合材料の熱膨張特性評価とその応用に関する研究2016
- Author(s)
  中村彰宏, 白須圭一, 玉木格, 山本剛, 橋田俊之
- Organizer
  日本機械学会東北支部第51期総会・講演会
- Place of Presentation
  仙台，東北大学
- Year and Date
  2016-03-11
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] 配向カーボンナノチューブ複合材料の熱膨張測定に基づくカーボンナノチューブの軸方向線膨張係数の実験的評価とその温度依存性に関する研究2016
- Author(s)
  白須圭一，中村彰宏，山本剛，小笠原俊夫，島村佳伸，井上翼，橋田俊之
- Organizer
  日本機械学会東北支部　第52期秋季講演会
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] Preparation and characterization of carbon nanotube composites2016
- Author(s)
  Keiichi Shirasu, Go Yamamoto and Toshiyuki Hashida
- Organizer
  USTB-TU Joint Workshop on Advanced Materials and Manufacture
- Place of Presentation
  Beijing, China
- Year and Date
  2016-03-10
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05502
[Presentation] ナノ領域特性評価に基づくカーボンナノチューブ/アルミナ複合材料の破壊機構解明に関する研究2014
- Author(s)
  野坂陽，王偉礼，白須圭一，山本剛，橋田俊之
- Organizer
  日本機械学会東北支部第49期総会・講演会
- Place of Presentation
  仙台，日本
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] Fabrication and mechanical evaluation of aligned multi-walled carbon nanotube sheet/alumina laminated ceramic composites2014
- Author(s)
  G. Yamamoto, K. Shirasu, Y. Nozaka, Y. Shimamura, Y. Inoue, T. Hashida
- Organizer
  16th European Conf. on Composite Materials
- Place of Presentation
  Seville, Spain
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] カーボンナノチューブを用いたセラミックス基複合材料の開発と応用展開2013
- Author(s)
  山本剛, 白須圭一, 野坂陽, 橋田俊之
- Organizer
  第1回カーボンナノチューブコンポジットワークショップ
- Place of Presentation
  熱海
- Year and Date
  2013-08-29
- Invited
- Data Source
  KAKENHI-PROJECT-24656079
[Presentation] ナノ直接引張試験法によるカーボンナノチューブ/アルミナ複合材料のナノ破壊特性評価2013
- Author(s)
  野坂陽，山本剛，白須圭一，高木敏行，橋田俊之
- Organizer
  資源・素材学会東北支部平成25年度春季大会
- Place of Presentation
  仙台，日本
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] Significance of Nano-Scale Experimental Techniques for Development of Carbon Nanotube Reinforced Ceramics Matrix Composites2013
- Author(s)
  Go Yamamoto and Toshiyuki Hashida
- Organizer
  8th International Symposium on Advanced Science and Technology in Experimental Mechanics
- Place of Presentation
  Sendai, Japan
- Invited
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] カーボンナノチュブを用いたセラミックス基複合材料の開発と応用展開2013
- Author(s)
  山本剛，白須圭一，野坂陽，橋田俊之
- Organizer
  第1回カーボンナノチューブコンポジットワークショップ
- Place of Presentation
  KKRホテル熱海（静岡県熱海市）
- Invited
- Data Source
  KAKENHI-PROJECT-24656079
[Presentation] Development of Pressureless Sintering Method for Carbon Nanotube/Alumina Composites and Evaluation of Their Microstructures and Mechanical Properties2013
- Author(s)
  Yo Nozaka, Weili Wang, Keiichi Shirasu, Go Yamamoto and Toshiyuki Hashida
- Organizer
  International Symposium for the 70th Anniversary of the Tohoku Branch of the Chemical Society of Japan
- Place of Presentation
  Sendai, Japan
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] Experimental Evaluation of Mechanical Properties of Multi-Walled Carbon Nanotube/Alumina Composites Using Nanoscale Tensile Testing Method and Comparison with Model Prediction2013
- Author(s)
  Yo Nozaka, Go Yamamoto, Keiichi Shirasu, Mamoru Omori and Toshiyuki Hashida
- Organizer
  The 14th Japan-Korea Students’ symposium on Solid Sate Ionics
- Place of Presentation
  Sendai, Japan
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] Significance of Nano-Scale Experimental Techniques for Development of Carbon Nanotube Reinforced Ceramics Matrix Composites2013
- Author(s)
  G. Yamamoto and T. Hashida
- Organizer
  8th Int. Sympo. on Advanced Science and Technology in Experimental Mechanics
- Place of Presentation
  Sendai, Japan
- Invited
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] Fabrication and Evaluation of Carbon Nanotube/Alumina Composites By Precursor Method2012
- Author(s)
  K. Shirasu, G. Yamamoto, Y. Nozaka, M. Omori, T. Hashida
- Organizer
  15^<TH> European Conf. on Composite Materials
- Place of Presentation
  Venice, Italy
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] カーボンナノチューブ/アルミナ複合材料作製のための常圧焼成法の開発と機械的特性評価に関する研究2012
- Author(s)
  野坂陽, 白須圭一, 山本剛, 大森守, 橋田俊之
- Organizer
  日本機械学会東北学生会第42回学生員卒業研究発表講演会
- Place of Presentation
  福島
- Year and Date
  2012-03-06
- Data Source
  KAKENHI-PROJECT-23860004
[Presentation] Fabrication of Carbon Nanotube Reinforced Ceramic Matrix Composites and Their Applications2012
- Author(s)
  Go Yamamoto, Keiichi Shirasu, Yo Nozaka, Mamoru Omori, Namie Suzuki, Toshiyuki Hashida
- Organizer
  The 1st Tohoku Univ.-Chosun Univ.-Chonbuk National Univ.-Mini Workshop, International Workshop on Energy and Reliability 2012
- Place of Presentation
  Chosun Univ., Chonbuk National Univ., Korea
- Data Source
  KAKENHI-PROJECT-23860004
[Presentation] Measurements of Carbon Nanotube Tensile Strength and Mechanical Properties of Carbon Nantube/Alumina Composites Prepared by Pressureless Sintering2012
- Author(s)
  G. Yamamoto
- Organizer
  15TH European Conference on Composite Materials (ECCM 15)
- Place of Presentation
  Venice, Italy
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] 無加圧焼結法により作製したカーボンナノチューブ/アルミナ複合材料の機械的特性評価に関する研究2012
- Author(s)
  山本剛, 白須圭一, 野坂陽, 高木敏行, 橋田俊之
- Organizer
  日本機械学会東北支部第47期総会・講演会
- Place of Presentation
  仙台
- Year and Date
  2012-03-13
- Data Source
  KAKENHI-PROJECT-23860004
[Presentation] Effects of Carbon Nanotube Strength on Mechanical Properties of Carbon Nanotube/Alumina Composites Prepared by Pressureless Sintering2011
- Author(s)
  G. Yamamoto, K. Shirasu, T. Takagi, T. Hashida
- Organizer
  NT11 Int. Conf. on the Science and Application of Nanotubes
- Place of Presentation
  Cambridge, UK
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] Effects of Carbon Nanotube Strength on Mechanical Properties of Carbon Nanotube/Alumina Composites Prepared by Pressureless Sintering2011
- Author(s)
  Go Yamamoto
- Organizer
  NT11 International Conference on the Science and Application of Nanotubes
- Place of Presentation
  University of Cambridge, UK
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] Effect of carbon nanotube addition on tribological behavior of carbon nanotube/alumina composites in dry and humid conditions2011
- Author(s)
  G. Yamamoto
- Organizer
  22nd European Conference on Diamond, Diamond‐Like Materials,Carbon Nanotubes and Nitrides
- Place of Presentation
  Garmisch‐Partenkirchen, Germany
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] Effects of Carbon Nanotube Strength on Mechanical Properties of Carbon Nanotube/Alumina Composites Prepared by Pressureless Sintering2011
- Author(s)
  Go Yamamoto, Keiichi Shirasu, Toshiyuki Takagi, Toshiyuki Hashida
- Organizer
  NT11 International Conference on the Science and Application of Nanotubes
- Place of Presentation
  University of Cambridge, Cambridge, UK
- Data Source
  KAKENHI-PROJECT-23860004
[Presentation] Development of carbon nanotube reinforced ceramic matrix composites and their applications2010
- Author(s)
  T. Hashida, G. Yamamoto, M. Omori, Y. Aizawa, H. Kimura
- Organizer
  The 4th Int. Sympo. on Advanced Mechatronics Engineering
- Place of Presentation
  Changwon, Korea
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] Evaluation of load transfer properties in carbon nanotube-alumina composites using single fiber pullout experiments2010
- Author(s)
  G. Yamamoto, T. Hashida, T. Takagi, J. Suk, J. An, R. Piner, R. Ruoff
- Organizer
  11^<th> Int. Conf. on the Science and Application of Nanotubes
- Place of Presentation
  Montréal, Canada
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] Evaluation of Load Transfer Properties in Carbon Nanotube-Alumina Composites Using Single Fiber Pullout Experiments2010
- Author(s)
  Go Yamamoto, Toshiyuki Hashida, Toshiyuki Takagi, Jiwon Suk, Jinho An, Richard Piner, Rodney Ruoff
- Organizer
  11^<th> International Conference on the Science and Application of Nanotubes 2010 (NT10)
- Place of Presentation
  Montreal, Quebec, Canada
- Year and Date
  2010-06-27
- Data Source
  KAKENHI-PROJECT-21226004
[Presentation] Mechanical Properties and Structural Characterization of Carbon Nanotube/Alumina Composites Prepared by Precursor Method2007
- Author(s)
  G. Yamamoto, M. Omori, K. Yokomizo, K. Adachi, T. Hashida
- Organizer
  18th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides
- Place of Presentation
  Berlin, Germany
- Data Source
  KAKENHI-PROJECT-19760462

1. HASHIDA Toshiyuki (40180814)

# of Collaborated Projects: 2 results

# of Collaborated Products: 36 results
2. TOHJI Kazuyuki (10175474)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
3. TAKAGI Toshiyuki (20197065)

# of Collaborated Projects: 1 results

# of Collaborated Products: 11 results
4. ONO Takahito (90282095)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. FU Ning (60250685)

# of Collaborated Projects: 1 results

# of Collaborated Products: 5 results
6. OMORI Mamoru (30005954)

# of Collaborated Projects: 1 results

# of Collaborated Products: 9 results
7. INOUE Yoku

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results
8. 秋田成司

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results
9. 白須圭一

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

Yamamoto Go 山本 剛

YAMAMOTO Go 山本 剛

山本 剛 ヤマモト ゴウ

Research Projects

Research Products

Co-Researchers

Multiscale Mechanics of MWCNT Reinforced Composite MaterialsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development for polymer matrix selection guide for carbon fiber reinforced plastic compositesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Preparation of Novel Silicon Nitride Ceramics Using Non-oxide Sintering Agents and Their Applications for Structural/Functional Materials

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Structural modification of multi-walled carbon nanotube: Is multi-walled carbon nanotube acceptable as a reinforcing agent in fiber-reinforced composites?Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of novel electromagnetic absorbers - Effects of MWCNT diameter and dispersion state of MWCNT -Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of novel electromagnetic absorbers using carbon nanotube/alumina compositesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

ナノスケール構造制御による高機能CNT／セラミックス複合材料の実用化手法開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Design-Fabrication-Evaluation Methodology for High Performance Composites Reinforced by Carbon Nanotube

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

炭素ナノ材料を用いた革新的シナジーセラミックス創製法の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] Tensile Strength of Unidirectional Carbon Fiber-Reinforced Plastic Composites2020

Author(s)

Total Pages

Publisher

ISBN

Data Source

[Book] 空飛ぶクルマ 空のモビリティ革命に向けた開発最前線 第４章第１節 CFRP の軽量化へのアプローチ2020

Author(s)

Total Pages

Publisher

ISBN

Data Source

[Book] Carbon Nanotubes- Recent Progress2018

Author(s)

Publisher

ISBN

Data Source

[Book] CNT/エポキシ複合材料を用いた熱バイモルフ2017

Author(s)

Publisher

Yamamoto Go 山本剛

YAMAMOTO Go 山本剛

山本剛ヤマモトゴウ

[Book] 空飛ぶクルマ　空のモビリティ革命に向けた開発最前線　第４章第１節　CFRP の軽量化へのアプローチ2020

[Book] 高分子における劣化・破壊現象の写真・データ事例集～原因特定と対策のために～（第15章，第8節）2014

[Book] カーボンナノチューブ・グラフェン分散技術の工業化と機能展開 -溶液・ポリマー・金属・セラミックスへの分散- (第2章，第5節)2014

[Book] 【エレクトロニクス用途における】コンポジット材料の混練・コンパウンド技術と分散・界面制御（第10章，第3節）2013