Hamasaki Hiroshi 濱崎洋

… Alternative Names

HAMASAKI Hiroshi 濱崎洋

Less

Researcher Number	30437579
Other IDs
Affiliation (Current)	2025: 中部大学, 工学部, 准教授
Affiliation (based on the past Project Information) *help	2021 – 2024: 中部大学, 工学部, 准教授 2020: 広島大学, 先進理工系科学研究科(工), 助教 2017 – 2019: 広島大学, 工学研究科, 助教 2016: 広島大学, 工学研究院, 助教 2015: 広島大学, 大学院工学研究院, 助教 … More 2011 – 2015: 広島大学, 工学(系)研究科(研究院), 助教 2013: 広島大学, 大学院・工学研究院, 助教 2012: 広島大学, 工学研究院, 助教 2010 – 2011: 広島大学, 大学院・工学研究院, 助教 2008 – 2009: 広島大学, 大学院・工学研究科, 助教 Less
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Production engineering/Processing studies Except Principal Investigator Production engineering/Processing studies / Basic Section 26030:Composite materials and interfaces-related / Basic Section 26050:Material processing and microstructure control-related
Keywords	Principal Investigator 異方性 / 温度依存性 / 数値シミュレーション / 温間成形 / プレス成形 / 金属物性 / 機械工作・生産工学 / 機械材料・材料力学 / 構成モデル / 粘塑性 … More / マルテンサイト変態 / オーステナイト系ステンレス鋼 / アルミニウム合金板 / 等塑性仕事面 / ひずみ速度依存性 / 温間変形 / アルミニウム合金 / 応力緩和 / 金属材料 / 変形特性 / 材料パラメータ同定 / CAE / 材料モデル / 熱間成形 / パラメータ同定 / 粘塑性変形 / 大ひずみ / 高温成形 / スプリングバック / 高張力鋼板 … More Except Principal Investigator CAE / 成形加工 / 板材成形 / ＣＡＥ / 成形限界 / マルチマテリアル / 溶接接合 / 資源循環 / 金属間化合物 / 異材接合 / 分離 / 割れ / 金属脆化 / レーザ / アディティブマニュファクチャリング / 高温割れ / その場観察 / 凝固割れ / 積層造形 / 異方性発展モデル / 超高張力鋼板 / 最適設計 / メタモデル / 最適プロセス / スプリングバック / プレス金型 / 応力－ひずみ関係 / 板成形 / 異方性 / 大ひずみ / 弾塑性特性 / 冷・熱間加工 / 熱間加工 / 弾塑性構成モデル / 高機能難加工板材 Less

金属脆化・割れ誘発を活用したテーラード分離技術の開発
- Principal Investigator
  
  門井浩太
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26030:Composite materials and interfaces-related
- Research Institution
  Osaka University
Investigation of cracking mechanism during additive manufacturing process and the prevention method
- Principal Investigator
  
  Kadoi Kota
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Osaka University
High-temperature constitutive model for high-temperature press forming CAEPrincipal Investigator
- Principal Investigator
  
  Hamasaki Hiroshi
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Hiroshima University
Material parameter identification and forming-limit criterion on ultra-high-strength steel sheets for sheet-metal forming simulation CAE
- Principal Investigator
  
  Yoshida Fusahito
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
Warm temperature visco-plastic deformation behavior of aluminum and magnesium alloy sheetsPrincipal Investigator
- Principal Investigator
  
  HAMASAKI HIROSHI
- Project Period (FY)
  2015 – 2016
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Hiroshima University
Optimum press-die design for springback compensation by material-mechanical meta-model building
- Principal Investigator
  
  Yoshida Fusahito
- Project Period (FY)
  2012 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
Determination of stress-strain relationship and anisotropy for accurate CAE of sheet metal forming
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
Simulation of formability for hot stamping processPrincipal Investigator
- Principal Investigator
  
  HAMASAKI HIROSHI
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
Accurate material models and prediction of forming limits on high performance difficult-to-form sheet metals for cold and hot forming CAE
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  2008 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University

All 2018 2017 2016 2015 2014 2013 2012 2011 2009

All Journal Article Presentation

[Journal Article] Elasto-viscoplastic behavior of 980 MPa nano-precipitation strengthened steel sheet at elevated temperatures and springback in warm bending2018
- Author(s)
  N. Saito, M. Fukahori, T. Minote, Y. Funakawa, D. Hisano, H. Hamasaki, F. Yoshida
- Journal Title
  
  International Journal of Mechanical Sciences
  
  Volume: 146-147 Pages: 571-582
- DOI
  10.1016/j.ijmecsci.2017.11.044
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06011
[Journal Article] Effect of anisotropic evolution on circular and oval hole expansion behavior of high-strength steel sheets2018
- Author(s)
  T. Suzuki, K. Okamura, G. Capilla, H. Hamasaki, F. Yoshida
- Journal Title
  
  International Journal of Mechanical Sciences
  
  Volume: 146-147 Pages: 556-570
- DOI
  10.1016/j.ijmecsci.2017.10.038
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06011
[Journal Article] Modelling of cyclic plasticity and martensitic transformation for type 304 austenitic stainless steel2018
- Author(s)
  Hiroshi Hamasaki, Tatsuya Ohno, Takashi Nakano, Eiichiro Ishimaru
- Journal Title
  
  International Journal of Mechanical Sciences
  
  Volume: 146-147 Pages: 536-543
- DOI
  10.1016/j.ijmecsci.2017.12.003
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06056
[Journal Article] Determination of the anisotropic hardening of sheet metals at large strain from stretch bending test2017
- Author(s)
  G. Capilla, H. Hamasaki, F. Yoshida, T. Suzuki, K. Okamura
- Journal Title
  
  Key Engineering Materials
  
  Volume: 725 Pages: 677-682
- DOI
  10.4028/www.scientific.net/kem.725.677
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06011
[Journal Article] Equi-Plastic Work Locus of 5000 Series Aluminum Alloy Sheet at Warm Temperature2017
- Author(s)
  Fumiaki Tamashiro, Hiroshi Hamasaki, Fusahito Yoshida
- Journal Title
  
  Key Engineering Materials
  
  Volume: 725 Pages: 695-699
- Data Source
  KAKENHI-PROJECT-15K17942
[Journal Article] Elimination of springback of high-strength steel sheet by usingadditional bending with counter punch2016
- Author(s)
  L. Komgrit, H. Hamasaki, R. Hino, F. Yoshida
- Journal Title
  
  Jornal of Material Processing Technology
  
  Volume: 229 Pages: 199-206
- DOI
  10.1016/j.jmatprotec.2015.08.029
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Implicit Stress Integration and Consistent Tangent Matrix for Yoshida’s 6th Order Polynomial Yield Function Combined with Yoshida-Uemori Kinematic Hardening Rule2015
- Author(s)
  H. Hamasaki, F. Yoshida, T. Uemori
- Journal Title
  
  Key Engineering Materials
  
  Volume: 651-653 Pages: 558-563
- DOI
  10.4028/www.scientific.net/kem.651-653.558
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Modeling of anisotropic hardening of sheet metals including description of the Bauschinger effect2015
- Author(s)
  F. Yoshida, H. Hamasaki, T. Uemori
- Journal Title
  
  International Journal of Plasticity
  
  Volume: 75 Pages: 170-188
- DOI
  10.1016/j.ijplas.2015.02.004
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Implicit stress integration and consistent tangent matrix for Yoshida's 6th order polynomial yield function with Yoshida-Uemori kinematic hardening rule2015
- Author(s)
  Hiroshi Hamasaki, Fusahito Yoshida, Takeshi Uemori
- Journal Title
  
  Key Engineering Materials
  
  Volume: 651-653 Pages: 558-563
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] A novel technology to eliminate U-bending springback of high2014
- Author(s)
  Komgrit Lawanwomga, Hiroshi Hamasaki,Ryutaro Hino, Fusahito Yoshida
- Journal Title
  
  Procedia Engineering
  
  Volume: 81 Pages: 957-962
- DOI
  10.1016/j.proeng.2014.10.124
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] A model of anisotropy evolution of sheet metals2014
- Author(s)
  Fusahito Yoshida, Hiroshi Hamasaki, Takeshi Uemori
- Journal Title
  
  Procedia Engineering
  
  Volume: 81 Pages: 1216-1221
- DOI
  10.1016/j.proeng.2014.10.100
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Elasto-Plasticity Property of High Strength Steel at Warm Temperature and Its Springback2013
- Author(s)
  N. Saito, M. Fukahori, D. Hisano, Y. Ichikawa, H. Hamasaki, F. Yoshida
- Journal Title
  
  Key Engineering Materials
  
  Volume: Vols. 535-536 Pages: 385-388
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760115
[Journal Article] Elasto-Plastic Property of High Strength Steel at Warm Temperature and Its Springback2013
- Author(s)
  N. Saito, M. Fukahori, Y. Ichikawa, H. Hamasaki, F. Yoshida
- Journal Title
  
  Key Engineering Materials
  
  Volume: 535-536 Pages: 385-388
- DOI
  10.4028/www.scientific.net/kem.535-536.385
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656108, KAKENHI-PROJECT-24360056
[Journal Article] Elasto-Plastic Property of High Strength Steel at Warm Temperature and Its Springback2013
- Author(s)
  Naoko Saito, Mitsugi Fukahori, Daisuke Hisano, Yuya Ichikawa, Hiroshi Hamasaki and Fusahito Yoshida
- Journal Title
  
  Key Engineering Materials
  
  Volume: 535-536 Pages: 385-388
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760115
[Journal Article] A user-friendly 3D yield function to describe anisotropy of steel sheets2013
- Author(s)
  F. Yoshida, H. Hamasaki, T. Uemori
- Journal Title
  
  International Journal of Plasticity
  
  Volume: Vol.45 Pages: 119-139
- DOI
  10.1016/j.ijplas.2013.01.010
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656108, KAKENHI-PROJECT-24360056
[Journal Article] メタモデルを使用した最適化手法とその応用2012
- Author(s)
  濱崎洋, Vassili V. Toropov
- Journal Title
  
  塑性と加工
  
  Volume: 53 Pages: 312-316
- NAID
  10030144809
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] メタモデルを使用した最適化手法とその応用2012
- Author(s)
  濱崎洋, Vassili V. Toropov
- Journal Title
  
  塑性と加工
  
  Volume: 53 Pages: 312-316
- NAID
  10030144809
- Data Source
  KAKENHI-PROJECT-23656108
[Journal Article] Springback Prediction for 430SS Stainless Clad Aluminum Alloy Sheet by Using Accurate Stress-Strain Response of Individual Layer2012
- Author(s)
  Hiroshi Hamasaki, ほか3名
- Journal Title
  
  Steel Research International
  
  Pages: 343-346
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Experimental observation of elasto-plasticity behavior of type 5000 and 60000 aluminum alloy sheets2011
- Author(s)
  S. Tamura, S. Sumikawa, T. Uemori, H. Hamasaki, F. Yoshida
- Journal Title
  
  Materials Transaction
  
  Volume: 52 Pages: 868-875
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] 5000系および6000系アルミニウム合金板における弾塑性挙動の実験観察2011
- Author(s)
  田村翔平, 澄川智史, 上森武, 濱崎洋, 吉田総仁
- Journal Title
  
  軽金属
  
  Volume: 61 Pages: 255-261
- NAID
  130004482054
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Constitutive Equations of Bauschinger Effect under Stress Path Change2011
- Author(s)
  T.Uemori, S.Sumikawa, S.Tamura, H.Hamasaki, T.Naka, R.Hino, F.Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 10^<th> ICTP Pages: 819-823
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Constitutive Equations of Bauschinger Effect under Stress Path Change2011
- Author(s)
  T. Uemori, S. Sumikawa, S. Tamura, H. Hamasaki, T. Naka, R. Hino, F. Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 10 Pages: 819-823
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Air bending and springback of stainless steel clad aluminum sheet2009
- Author(s)
  K.Yilamu, R.Hino, H.Hamasaki, F.Yoshida
- Journal Title
  
  Journal of Materials Processing Technology 210
  
  Pages: 272-278
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Yield-Point Phenomena of Ti-20V-4Al-1Sn at 1073 K and Its Constitutive Modelling2009
- Author(s)
  X.T.Wang, H.Hamasaki, M.Yamamura, R.Yamauchi, T.Maeda, Y.Shirai, F.Yoshida
- Journal Title
  
  Materials Transactions 50
  
  Pages: 1576-1578
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Yield-Point Phenomena of Ti-20V-4Al-1Sn at1073 K and Its Constitutive Modelling2009
- Author(s)
  X. T. Wang, H. Hamasaki, M. Yamamura, R. Yamauchi, T. Maeda, Y. Shirai and F. Yoshida
- Journal Title
  
  Materials Transactions
  
  Volume: 50-6 Pages: 1576-1578
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Yield-Point Phenomena of Ti-20V-4Al-1Sn at 1073K and Its Constitutive Modelling2009
- Author(s)
  X.T. Wang, H. Hamasaki, M. Yamamura, R. Yamauchi, T. Maeda, Y. Shirai, F. Yoshida
- Journal Title
  
  Materials Transactions 50-6
  
  Pages: 1576-1578
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] A Study of High Temperature Viscoplastic Deformation of Beta Titanium Alloy Considering Yield-Point Phenomena2009
- Author(s)
  X.T.Wang, H.Hamasaki, M.Yamamura, R.Yamauchi, T.Maeda, Y.Shirai, F.Yoshida
- Journal Title
  
  Key Engineering Materials 410/411
  
  Pages: 177-185
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] Stress-strain curve and martensite volume fraction under biaxial tension for type 304 stainless steel2018
- Author(s)
  Shota Kusaka, Hiroshi Hamasaki
- Organizer
  The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06056
[Presentation] Biaxial deformation on AA5182-O aluminium alloy sheet at warm temperature2018
- Author(s)
  Hiroshi Hamasaki
- Organizer
  The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06056
[Presentation] A5182-Oアルミニウム合金板の温間応力緩和特性2017
- Author(s)
  濱崎　洋
- Organizer
  軽金属学会第133回秋季大会
- Data Source
  KAKENHI-PROJECT-17K06056
[Presentation] A5182-O板材の温間成形限界2016
- Author(s)
  生田智子，濱崎洋，吉田総仁
- Organizer
  第67回塑性加工連合講演会
- Place of Presentation
  日本工業大学（南埼玉郡）
- Year and Date
  2016-10-21
- Data Source
  KAKENHI-PROJECT-15K17942
[Presentation] Equi-Plastic Work Locus of 5000 Series Aluminum Alloy Sheet at Warm Temperature2016
- Author(s)
  Fumiaki Tamashiro, Hiroshi Hamasaki, Fusahito Yoshida
- Organizer
  13th Asia-Pacific Symposium on Engineering Plasticity and Its Applications
- Place of Presentation
  東広島芸術文化ホールくらら（東広島市）
- Year and Date
  2016-12-04
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K17942
[Presentation] Anisotropic hardening behavior of HSS sheets at large strain determinred from stretch-bending test2016
- Author(s)
  G. Capilla, H. Hamasaki, F. Yoshida, T. Suzuki, K. Okamura
- Organizer
  第67回塑性加工連合講演会
- Place of Presentation
  日本工業大学
- Year and Date
  2016-10-21
- Data Source
  KAKENHI-PROJECT-16K06011
[Presentation] 温間引張試験におけるアルミニウム合金板の応力緩和2016
- Author(s)
  森光勇太，濱崎洋，吉田総仁
- Organizer
  第67回塑性加工連合講演会
- Place of Presentation
  日本工業大学（南埼玉郡）
- Year and Date
  2016-10-21
- Data Source
  KAKENHI-PROJECT-15K17942
[Presentation] 温間二軸引張試験による5000系アルミニウム合金板の温間等塑性仕事面の観察2015
- Author(s)
  玉城史彬，日野隆太郎，濱崎洋，吉田総仁
- Organizer
  第66回塑性加工連合講演会
- Place of Presentation
  いわき市文化センター
- Year and Date
  2015-10-29
- Data Source
  KAKENHI-PROJECT-15K17942
[Presentation] 980MPa級高張力鋼板の温間繰返し変形特性2014
- Author(s)
  市川祐也,佐々木尭,濱崎洋,吉田総仁,斎藤直子,深堀貢
- Organizer
  日本機械学会中国四国支部第52期総会・講演会
- Place of Presentation
  鳥取大学
- Year and Date
  2014-03-07
- Data Source
  KAKENHI-PROJECT-23760115
[Presentation] Stiffness Improvement of Stamping Die by Meansof Topology Optimization2013
- Author(s)
  濱崎洋
- Organizer
  16th International Conference on Advances in Materials & Processing Technologies (AMPT2013)
- Place of Presentation
  Taipei, Taiwan
- Data Source
  KAKENHI-PROJECT-24360056
[Presentation] 980MPa級析出強化型熱延ハイテンの温間弾塑性挙動2013
- Author(s)
  佐々木尭,市川祐也,濱崎洋,吉田総仁
- Organizer
  日本機械学会中国四国学生会第43回学生員卒業研究発表講演会
- Place of Presentation
  高知工科大学
- Year and Date
  2013-03-17
- Data Source
  KAKENHI-PROJECT-23760115
[Presentation] 高張力鋼板の温間弾塑性特性とスプリングバック2012
- Author(s)
  斉藤直子,深堀貢,久野大輔,市川祐也,濱崎洋,吉田総仁
- Organizer
  平成24年度塑性加工春期講演会
- Place of Presentation
  金沢(講演論文集, pp.49-50)
- Year and Date
  2012-06-09
- Data Source
  KAKENHI-PROJECT-23760115
[Presentation] 高張力鋼板の温間繰返し変形挙動の観察2012
- Author(s)
  市川祐也,久野大輔,濱崎洋,日野隆太郎,吉田総仁
- Organizer
  日本機械学会中国四国学生会第42回学生員卒業研究発表講演会
- Place of Presentation
  広島大学
- Year and Date
  2012-03-07
- Data Source
  KAKENHI-PROJECT-23760115
[Presentation] オーステナイト系ステンレス鋼の大ひずみ繰返し変形挙動とそのモデル化2011
- Author(s)
  濱崎洋
- Organizer
  日本塑性加工学会2011年春季講演会
- Place of Presentation
  早稲田大学,東京
- Year and Date
  2011-05-28
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 高張力鋼板の形状凍結性に及ぼす引張り力の影響2009
- Author(s)
  今崎友彰, 原田康平, 中哲夫, 濱崎洋, 上森武, 日野隆太郎, 吉田総仁
- Organizer
  第60回塑性加工連合講演会
- Place of Presentation
  信州大学
- Year and Date
  2009-11-01
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] ステンレス/アルミニウム積層板の引張曲げ・曲げ戻しにおけるスプリングバック解析に及ぼす材料モデルの影響2009
- Author(s)
  日野隆太郎, Yilamu Kelimu, 濱崎洋, 吉田総仁
- Organizer
  平成21年度(第40回)塑性加工春季講演会
- Place of Presentation
  京都大学
- Year and Date
  2009-05-29
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 種々の異方性降伏関数と吉田-上森モデルの組合せによるアルミニウム合金板のスプリングバック解析2009
- Author(s)
  澄川智史, 田村翔平, 濱崎洋, 上森武, 麻寧緒, 吉田総仁
- Organizer
  平成21年度(第40回)塑性加工春季講演会
- Place of Presentation
  京都大学
- Year and Date
  2009-05-29
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 繰り返し負荷試験と最適化手法による金属板材の材料パラメータ同定2009
- Author(s)
  濱崎洋, 上森武, 吉田総仁
- Organizer
  平成21年度(第40回)塑性加工春季講演会
- Place of Presentation
  京都大学
- Year and Date
  2009-05-30
- Data Source
  KAKENHI-PROJECT-20360070

1. YOSHIDA Fusahito (50016797)

# of Collaborated Projects: 4 results

# of Collaborated Products: 25 results
2. HINO Ryutaro (10283160)

# of Collaborated Projects: 4 results

# of Collaborated Products: 7 results
3. UEMORI Takeshi (70335701)

# of Collaborated Projects: 2 results

# of Collaborated Products: 11 results
4. Kadoi Kota (40454029)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. 千葉浩行 (30757373)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Hamasaki Hiroshi 濱崎 洋

HAMASAKI Hiroshi 濱崎 洋

Research Projects

Research Products

Co-Researchers

金属脆化・割れ誘発を活用したテーラード分離技術の開発

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Investigation of cracking mechanism during additive manufacturing process and the prevention method

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

High-temperature constitutive model for high-temperature press forming CAEPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Material parameter identification and forming-limit criterion on ultra-high-strength steel sheets for sheet-metal forming simulation CAE

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Warm temperature visco-plastic deformation behavior of aluminum and magnesium alloy sheetsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Optimum press-die design for springback compensation by material-mechanical meta-model building

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Determination of stress-strain relationship and anisotropy for accurate CAE of sheet metal forming

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Simulation of formability for hot stamping processPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Accurate material models and prediction of forming limits on high performance difficult-to-form sheet metals for cold and hot forming CAE

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Elasto-viscoplastic behavior of 980 MPa nano-precipitation strengthened steel sheet at elevated temperatures and springback in warm bending2018

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Effect of anisotropic evolution on circular and oval hole expansion behavior of high-strength steel sheets2018

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Modelling of cyclic plasticity and martensitic transformation for type 304 austenitic stainless steel2018

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Determination of the anisotropic hardening of sheet metals at large strain from stretch bending test2017

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Equi-Plastic Work Locus of 5000 Series Aluminum Alloy Sheet at Warm Temperature2017

Hamasaki Hiroshi 濱崎洋

HAMASAKI Hiroshi 濱崎洋