Hashimoto Yohei 橋本洋平

Researcher Number	30456686
Other IDs
Affiliation (Current)	2025: 金沢大学, 機械工学系, 准教授
Affiliation (based on the past Project Information) *help	2025: 金沢大学, 機械工学系, 准教授 2023: 金沢大学, 機械工学系, 准教授 2017 – 2022: 金沢大学, 機械工学系, 助教
Review Section/Research Field	Principal Investigator Basic Section 18020:Manufacturing and production engineering-related Except Principal Investigator Basic Section 18020:Manufacturing and production engineering-related / Conservative dentistry
Keywords	Principal Investigator 研磨 / 複雑形状 / 仕上げ加工 / マスフィニッシング / ジャイロ式バレル研磨 / バレル研磨 / スラリ / 研磨液 / 両面ポリシング / 両面ラッピング … More / 両面研磨 / 研磨加工 / ジャイロバレル研磨 / 研磨挙動 / コンパウンド / 湿式条件 / ストリームフィニッシング / ジャイロフィニッシング / DEM / 研磨量分布 / 表面粗さ向上技術 … More Except Principal Investigator 複合膜 / コーティング / 耐熱性 / 工具摩耗 / エンドミル / 切削工具 / 潤滑性 / マグネリ相 / 多層膜 / 窒化バナジウム / PVDコーティング / 非う蝕性欠損 / 歯学 / 磨耗 / 複合的作用 / 酸蝕 / 摩耗 / 応力 / アブフラクション / 非う蝕性歯質欠損 Less

遠心バレル研磨の加工物と研磨メディアの相対運動に着目した理論構築Principal Investigator
- Principal Investigator
  
  橋本洋平
- Project Period (FY)
  2025 – 2027
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa University
両面研磨加工における加工物‐定盤間への研磨液浸入現象の解明と効果的な供給技術開発Principal Investigator
- Principal Investigator
  
  橋本洋平
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa University
Fundamental research of wet mass finishing focused on abrasive media behaviorPrincipal Investigator
- Principal Investigator
  
  Hashimoto Yohei
- Project Period (FY)
  2020 – 2021
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa University
Fundamental investigation on gyro barrel finishing for smoothing of complicated shapePrincipal Investigator
- Principal Investigator
  
  Hashimoto Yohei
- Project Period (FY)
  2018 – 2019
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa University
Development of VN(vanadium nitride)-containing coating film having high-temperature lubricity and its application to machining difficult-to-machine materials
- Principal Investigator
  
  Hosokawa Akira
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa University
Experimental study on non-carious cervical lesion
- Principal Investigator
  
  Furumoto Tatsuaki
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Conservative dentistry
- Research Institution
  Kanazawa University

All 2024 2023 2022 2021 2020 2019 2018

All Journal Article Presentation Book Patent

[Book] 半導体デバイス製造を支えるCMP技術の開発動向2023
- Author(s)
  礒部晶, 菅井和己, 加藤丈滋, 杉本建二, 束田充, 岡本宗大, 湊拓也, 橋本洋平, 藤田隆, 須田聖一, 畝田道雄, 會田英雄, 土肥俊郎, 久保田章亀
- Total Pages
  148
- Publisher
  サイエンス&テクノロジー
- ISBN
  9784864283083
- Data Source
  KAKENHI-PROJECT-22K03839
[Journal Article] Finishing Speed Improvement Using Side Cover Plates in Gyro Finishing2023
- Author(s)
  Hashimoto Yohei、Nakayama Yugo、Furumoto Tatsuaki、Sekiya Akihito、Yamada Tetsuya、Kawahara Tatsuki、Hosokawa Akira
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 17 Issue: 1 Pages: 47-54
- DOI
  10.20965/ijat.2023.p0047
- ISSN
  1881-7629, 1883-8022
- Year and Date
  2023-01-05
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-22K03839
[Journal Article] Miniaturization of Texture Size of One-process Surface Texturing by Electrochemical Machining2022
- Author(s)
  KOYANO Tomohiro、TAKAHASHI Katsunari、HOSOKAWA Akira、FURUMOTO Tatsuaki、HASHIMOTO Yohei
- Journal Title
  
  Journal of The Japan Society of Electrical Machining Engineers
  
  Volume: 56 Issue: 141 Pages: 52
- DOI
  10.2526/jseme.56.52
- ISSN
  0387-754X, 1881-0888
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-22K03839
[Journal Article] Process state estimation in chemical mechanical polishing (CMP) by inverse analysis of in-process data2022
- Author(s)
  Suzuki N.、Yamaguchi R.、Hashimoto Y.、Yasuda H.、Yamaki S.、Mochizuki Y.
- Journal Title
  
  CIRP Annals
  
  Volume: 71 Issue: 1 Pages: 273-276
- DOI
  10.1016/j.cirp.2022.04.060
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-22K03839, KAKENHI-PROJECT-23K22652
[Journal Article] Novel method to visualize Preston’s coefficient distribution for chemical mechanical polishing process2022
- Author(s)
  Hashimoto Yohei、Furumoto Tatsuaki、Sato Takumi、Suzuki Norikazu、Yasuda Hozumi、Yamaki Satoru、Mochizuki Yoshihiro
- Journal Title
  
  Japanese Journal of Applied Physics
  
  Volume: 61 Issue: 11 Pages: 116502-116502
- DOI
  10.35848/1347-4065/ac916b
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-22K03839, KAKENHI-PROJECT-23K22652
[Journal Article] A calculation method for workpiece profile variation during double-sided lapping by considering workpiece elastic deformation2022
- Author(s)
  Hashimoto Yohei、Ozaki Ryo、Furumoto Tatsuaki、Hosokawa Akira
- Journal Title
  
  Precision Engineering
  
  Volume: 73 Pages: 457-469
- DOI
  10.1016/j.precisioneng.2021.09.016
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K14623
[Journal Article] Improving finishing efficiency using a cover plate in gyro finishing2022
- Author(s)
  Hashimoto Yohei、Nakayama Yugo、Furumoto Tatsuaki、Hosokawa Akira
- Journal Title
  
  Precision Engineering
  
  Volume: 74 Pages: 140-146
- DOI
  10.1016/j.precisioneng.2021.11.004
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K14623
[Journal Article] Experimental investigation into the spatter particle behavior of maraging steel during selective laser melting2021
- Author(s)
  FURUMOTO Tatsuaki、EGASHIRA Kyota、OISHI Kazushi、ABE Satoshi、YAMAGUCHI Mitsugu、HASHIMOTO Yohei、KOYANO Tomohiro、HOSOKAWA Akira
- Journal Title
  
  JAMDSM
  
  Volume: 15 Issue: 4 Pages: JAMDSM0039-JAMDSM0039
- DOI
  10.1299/jamdsm.2021jamdsm0039
- NAID
  130008059258
- ISSN
  1881-3054
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K14623
[Journal Article] CO2 laser cleavage of chemically strengthened glass2021
- Author(s)
  Furumoto Tatsuaki、Hashimoto Yohei、Ogi Hisashi、Kawabe Tomoya、Yamaguchi Mitsugu、Koyano Tomohiro、Hosokawa Akira
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 289 Pages: 116961-116961
- DOI
  10.1016/j.jmatprotec.2020.116961
- Data Source
  KAKENHI-PROJECT-20K14623
[Journal Article] Fundamental investigation of gyro finishing experimental investigation of contact force between cylindrical workpiece and abrasive media under dry condition2021
- Author(s)
  Hashimoto Yohei、Ito Takuma、Nakayama Yugo、Furumoto Tatsuaki、Hosokawa Akira
- Journal Title
  
  Precision Engineering
  
  Volume: 67 Pages: 123-136
- DOI
  10.1016/j.precisioneng.2020.09.009
- Data Source
  KAKENHI-PROJECT-20K14623
[Journal Article] Thermal stress cleavage of a single-crystal round sapphire bar by carbon dioxide laser2021
- Author(s)
  Furumoto Tatsuaki、Saito Ryuya、Watanabe Kota、Ochi Yuzo、Hashimoto Yohei、Yamaguchi Mitsugu、Koyano Tomohiro、Hosokawa Akira
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 297 Pages: 117237-117237
- DOI
  10.1016/j.jmatprotec.2021.117237
- Data Source
  KAKENHI-PROJECT-20K14623
[Journal Article] A novel measurement method for the torque acting on the upper platen in a three-way double-sided lapping/polishing machine2021
- Author(s)
  Hashimoto Yohei、Ozaki Ryo、Furumoto Tatsuaki、Hosokawa Akira
- Journal Title
  
  Precision Engineering
  
  Volume: 72 Pages: 891-898
- DOI
  10.1016/j.precisioneng.2021.08.004
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K14623
[Journal Article] Effects of the powder morphology, size distribution, and characteristics on the single track formation in selective laser melting of H13 steel2021
- Author(s)
  YAMAGUCHI Mitsugu、FURUMOTO Tatsuaki、TANABE Yuuya、YAMADA Shinnosuke、OSAKI Mototsugu、HASHIMOTO Yohei、KOYANO Tomohiro、HOSOKAWA Akira
- Journal Title
  
  JAMDSM
  
  Volume: 15 Issue: 3 Pages: JAMDSM0035-JAMDSM0035
- DOI
  10.1299/jamdsm.2021jamdsm0035
- NAID
  130008050970
- ISSN
  1881-3054
- Language
  English
- Data Source
  KAKENHI-PROJECT-20K14623
[Journal Article] Study on the relationship between material removal rate and tool flank temperature in orthogonal turn-milling2021
- Author(s)
  SHIMANUKI Koji、HOSOKAWA Akira、KOYANO Tomohiro、FURUMOTO Tatsuaki、HASHIMOTO Yohei
- Journal Title
  
  JAMDSM
  
  Volume: 15 Issue: 4 Pages: JAMDSM0043-JAMDSM0043
- DOI
  10.1299/jamdsm.2021jamdsm0043
- NAID
  130008059230
- ISSN
  1881-3054
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K14623
[Journal Article] Internal face finishing for a cooling channel using a fluid containing free abrasive grains2021
- Author(s)
  Yamaguchi Mitsugu、Furumoto Tatsuaki、Inagaki Shuuji、Tsuji Masao、Ochiai Yoshiki、Hashimoto Yohei、Koyano Tomohiro、Hosokawa Akira
- Journal Title
  
  The International Journal of Advanced Manufacturing Technology
  
  Volume: 114 Issue: 1-2 Pages: 497-507
- DOI
  10.1007/s00170-021-06893-y
- Data Source
  KAKENHI-PROJECT-20K14623
[Journal Article] Studies on high-efficiency and high-precision orthogonal turn-milling-The effects of relative cutting speed and tool axis offset on tool flank temperature2020
- Author(s)
  Shimanuki Koji、Hosokawa Akira、Koyano Tomohiro、Furumoto Tatsuaki、Hashimoto Yohei
- Journal Title
  
  Precision Engineering
  
  Volume: 66 Pages: 180-187
- DOI
  10.1016/j.precisioneng.2020.06.013
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K14623, KAKENHI-PROJECT-18H01349
[Journal Article] Studies on Eco-Friendly Grinding with an Extremely Small Amount of Coolant – Applicability of Contact-Type Flexible Brush-Nozzle –2019
- Author(s)
  HOSOKAWA Akira, SHIMIZU Ryosuke, KIWATA Takahiro, KOYANO Tomohiro, FURUMOTO Tatsuaki, HASHIMOTO Yohei
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 13 Issue: 5 Pages: 648-656
- DOI
  10.20965/ijat.2019.p0648
- NAID
  130007703284
- ISSN
  1881-7629, 1883-8022
- Year and Date
  2019-09-05
- Language
  English
- Data Source
  KAKENHI-PROJECT-18H01349
[Journal Article] Estimation of material removal rate distribution in double-sided polishing of thick square workpiece considering workpiece attitude2019
- Author(s)
  Hashimoto Yohei, Sano Tomoya, Furumoto Tatsuaki, Hosokawa Akira
- Journal Title
  
  JAMDSM
  
  Volume: 13 Issue: 1 Pages: JAMDSM0020-JAMDSM0020
- DOI
  10.1299/jamdsm.2019jamdsm0020
- NAID
  130007609362
- ISSN
  1881-3054
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01349
[Journal Article] Development an identification method of friction coefficient between wafer and carrier in double-sided lapping2019
- Author(s)
  HASHIMOTO Yohei, SANO Tomoya, FURUMOTO Tatsuaki, HOSOKAWA Akira
- Journal Title
  
  Precision Engineering
  
  Volume: 56 Pages: 364-369
- DOI
  10.1016/j.precisioneng.2019.01.005
- Data Source
  KAKENHI-PROJECT-18H01349
[Journal Article] Turning of difficult-to-machine materials with an actively driven rotary tool (ADRT) —Proposition of reciprocating turning contingent on fundamental cutting characteristics—2018
- Author(s)
  Hosokawa Akira, Yoshimatsu Haruki, Koyano Tomohiro, Furumoto Tatsuaki, Hashimoto Yohei
- Journal Title
  
  JAMDSM
  
  Volume: 12 Issue: 5 Pages: JAMDSM0103-JAMDSM0103
- DOI
  10.1299/jamdsm.2018jamdsm0103
- NAID
  130007499424
- ISSN
  1881-3054
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18H01349
[Journal Article] Investigation of Wafer Behavior Based on Simulation of Double-Sided Lapping2018
- Author(s)
  橋本洋平, 佐野智哉, 古本達明, 細川　晃
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 84 Issue: 2 Pages: 188-193
- DOI
  10.2493/jjspe.84.188
- NAID
  130006337592
- ISSN
  0912-0289, 1882-675X
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01349
[Patent] 遠心バレル研磨における回転数制御方法及び遠心バレル研磨方法2024
- Inventor(s)
  橋本洋平, 河原達樹
- Industrial Property Rights Holder
  橋本洋平, 河原達樹
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2024-023367
- Filing Date
  2024
- Data Source
  KAKENHI-PROJECT-22K03839
[Patent] ワークピースの化学機械研磨システムおよび化学機械研磨方法2023
- Inventor(s)
  渡邉夕貴, 安田穂積, 鈴木教和, 橋本洋平
- Industrial Property Rights Holder
  渡邉夕貴, 安田穂積, 鈴木教和, 橋本洋平
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2023-220438
- Filing Date
  2023
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] 光沢仕上げ用球形メディアによるジャイロバレル研磨の表面形成に関する研究2024
- Author(s)
  三宅健太, 橋本洋平, 古本達明,小谷野智広, 山口貢
- Organizer
  2024年度精密工学会春季大会学術講演会第31回「学生会員卒業研究発表講演会」
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] バレル研磨による表面創成2024
- Author(s)
  橋本洋平
- Organizer
  砥粒加工学会北陸信越地区部会令和6年度第1回研究・見学会
- Invited
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] ジャイロバレル研磨を用いた歯車研磨における研磨量分布の調査2023
- Author(s)
  橋本創汰, 橋本洋平, 古本達明, 小谷野智広, 山口貢
- Organizer
  2023年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] 両面研磨加工の理論構築を目指して2023
- Author(s)
  橋本洋平
- Organizer
  令和 5 年度第 54 回グラインディング・アカデミー
- Invited
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] Investigation of slurry supply to boundary between workpieces and upper platen in double-sided lapping2023
- Author(s)
  Yohei Hashimoto, Tomoya Sasaki, Ryuki Shibasaki, Tatsuaki Furumoto, Tomohiro Koyano, Mitsugu Yamaguchi
- Organizer
  Leading Edge Manufacturing/Material and Processing 2023
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] 両面研磨における定盤トルクの変化に基づく加工終点検知技術の開発2023
- Author(s)
  柴崎竜輝, 橋本洋平, 古本達明, 小谷野智広, 山口貢
- Organizer
  2023年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] CMPにおけるプレストン係数分布の可視化2023
- Author(s)
  橋本洋平, 佐藤拓実, 鈴木教和, 安田穂積, 山木暁, 望月宣宏
- Organizer
  2023年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] ジャイロバレル研磨を活用した金属AM造形物のサポート除去に関する検討2023
- Author(s)
  橋本洋平, 山谷晃平, 古本達明, 阿部諭, 小谷野智広, 山口貢
- Organizer
  日本機械学会生産システム部門研究発表講演会2023
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] A method for endpoint monitoring based on platen torque in double-sided lapping2023
- Author(s)
  Ryuki Shibasaki, Yohei Hashimoto, Tomoya Sasaki, Tatsuaki Furumoto, Tomohiro Koyano, Mitsugu Yamaguchi
- Organizer
  Leading Edge Manufacturing/Material and Processing 2023
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] 遠心バレル研磨における加工物エッジへの丸み形成に関する基礎検討2023
- Author(s)
  山谷晃平, 橋本洋平, 小谷野智広, 山口貢, 江面篤志, 河原達樹, 伊東稔, 古本達明
- Organizer
  2023年度精密工学会北陸信越支部学術講演会
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] 両面研磨における新しい終点検知技術の開発2023
- Author(s)
  柴崎竜輝, 橋本洋平, 佐々木友也, 古本達明, 小谷野智広, 山口貢
- Organizer
  精密工学会第30回卒業研究発表講演会
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] 両面研磨における加工物上面への研磨液供給経路の検討2023
- Author(s)
  橋本洋平, 佐々木友也, 柴崎竜輝, 古本達明, 小谷野智広, 山口貢
- Organizer
  2023年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] Temperature Measurement of Wire Electrode during Wire Electrical Discharge Machining Using Two-color Pyrometer with Optical Fiber2022
- Author(s)
  T. Hinata, T. Koyano, A. Hosokawa, T. Furumoto, Y. Hashimoto, M. Yamaguchi, S. Abe
- Organizer
  The 19th International Conference on Precision Engineering (ICPE2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] 両面研磨における加工物上面の研磨液挙動の検討2022
- Author(s)
  橋本洋平
- Organizer
  砥粒加工学会研磨の基礎科学とイノベーション化専門委員会第24回研究会
- Invited
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] Novel drag finishing machine for less variation in finishing speed2022
- Author(s)
  A. Kutsuna, Y. Hashimoto, T. Furumoto, M. Yamaguchi, T. Koyano, A. Ezura, T. Kawahara, A. Sekiya, A. Hosokawa
- Organizer
  The 19th International Conference on Precision Engineering (ICPE2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] ジャイロバレル研磨を活用した金属AM造形物のサポート除去方法の提案2022
- Author(s)
  山谷晃平, 橋本洋平, 古本達明, 山口貢, 阿部諭, 江面篤志, 小谷野智広, 細川晃
- Organizer
  精密工学会第29回「学生会員卒業研究発表講演会」
- Data Source
  KAKENHI-PROJECT-20K14623
[Presentation] PVDコーティングエンドミルの切削特性にドラッグフィニッシュ処理が及ぼす影響の検討2022
- Author(s)
  川畠丈志, 橋本洋平, 細川晃, 久綱敦也, 江面篤志, 古本達明
- Organizer
  日本機械学会第14回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] ジャイロバレル研磨によるコーティング膜の表面粗さ向上の試み2022
- Author(s)
  平野翔太, 橋本洋平, 久綱敦也, 細川晃, 小谷野智広, 山口貢, 阿部諭, 江面篤志, 古本達明
- Organizer
  日本機械学会第14回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] 加工物軸方向の研磨速度の偏りを解消できる新型ドラッグフィニッシュ装置2022
- Author(s)
  久綱敦也, 橋本洋平, 古本達明, 山口貢, 小谷野智広, 江面篤志, 河原達樹, 関谷章仁, 細川晃
- Organizer
  2022年度砥粒加工学会学術講演会（ABTEC2022）
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] 両面研磨加工における加工物-上定盤間の研磨液挙動の検討2022
- Author(s)
  佐々木友也, 橋本洋平, 古本達明, 山口貢, 江面篤志, 小谷野智広, 阿部諭, 細川晃
- Organizer
  2022年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20K14623
[Presentation] Development of multi-layer PVD coating film with high-temperature lubricity and heat resistance and their application to cutting tools2022
- Author(s)
  A. Hosokawa, T. Uno, T. Koyano, T. Furumoto, Y. Hashimoto
- Organizer
  The 19th International Conference on Precision Engineering (ICPE2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] Effects of Voltage Pulse Conditions on Electrochemical Machining of Cemented Carbide2022
- Author(s)
  T. Koyano, T. Hokin, A. Hosokawa, T. Furumoto, Y. Hashimoto, M. Yamaguchi, S. Abe
- Organizer
  The 19th International Conference on Precision Engineering (ICPE2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] Effective removal of support structures constructed by PBF process using gyro finishing2022
- Author(s)
  K. Yamaya, Y. Hashimoto, T. Furumoto, M. Yamaguchi, T. Koyano, A. Ezura, A. Hosokawa
- Organizer
  The 19th International Conference on Precision Engineering (ICPE2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] ジャイロバレル研磨を活用した金属AM造形物のサポート除去2022
- Author(s)
  山谷晃平, 橋本洋平, 古本達明, 阿部諭, 山口貢, 小谷野智広, 江面篤志
- Organizer
  2022年度砥粒加工学会学術講演会（ABTEC2022）
- Data Source
  KAKENHI-PROJECT-22K03839
[Presentation] 両面研磨における加工物-上定盤間の研磨液挙動の観察の試み2021
- Author(s)
  佐々木友也, 橋本洋平, 古本達明, 山口貢, 阿部諭, 小谷野智広, 細川晃
- Organizer
  2021年度精密工学会北陸信越支部学術講演会
- Data Source
  KAKENHI-PROJECT-20K14623
[Presentation] 側方板を用いたジャイロバレル研磨における研磨速度向上の試み2021
- Author(s)
  中山友吾, 橋本洋平, 古本達明, 山口貢, 小谷野智広, 細川晃
- Organizer
  2021年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20K14623
[Presentation] Observation of slurry behavior between workpiece and upper platen in Double-sided Lapping2021
- Author(s)
  Y. Sasaki, Y. Hashimoto, T. Furumoto, M. Yamaguchi, T. Koyano, A. Hosokawa
- Organizer
  The 23rd International Symposium on Advances in Abrasive Technology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K14623
[Presentation] Improvement of Finishing Speed by Using Side Cover Plates in Gyro Finishing2021
- Author(s)
  Y. Nakayama, Y. Hashimoto, T. Furumoto, M. Yamaguchi, T. Koyano, A. Hosokawa
- Organizer
  The 23rd International Symposium on Advances in Abrasive Technology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K14623
[Presentation] CFRPの高能率・高品位加工－エンドミル加工における毛羽立ち抑制－2020
- Author(s)
  島村知克, 細川　晃, 小谷野智広, 古本達明, 橋本洋平
- Organizer
  2020年度精密工学会北陸信越支部学術講演会講演論文集
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] Investigation of Orthogonal Turn-Milling for Higher Machining Efficiency and Accuracy: Relationship Between Material Removal Rate and Measured Tool Flank Temperature2020
- Author(s)
  Koji Shimanuk, Akira Hosokawa, Tomohiro Koyano, Tatsuaki Furumoto, Yohei Hashimoto
- Organizer
  JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP)
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] 両面研磨における定盤トルク測定手法の開発2020
- Author(s)
  尾﨑稜, 橋本洋平, 古本達明, 山口貢, 阿部諭, 小谷野智広, 細川晃
- Organizer
  2020年度精密工学会北陸信越支部学術講演会
- Data Source
  KAKENHI-PROJECT-20K14623
[Presentation] FAD法による高温高潤滑VNコーティング膜の開発と切削への適用2020
- Author(s)
  宇野高志, 細川　晃, 小谷野智広, 古本達明, 橋本洋平
- Organizer
  2020年度精密工学会北陸信越支部学術講演会講演論文集
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] Experimental Investigation of Torques Acting on Upper and Lower Platens in Double-sided Lapping2020
- Author(s)
  Ryo Ozaki, Yohei Hashimoto, Hinako Hashimoto, Tatsuaki Furumoto, Tomohiro Koyano, Akira Hosokawa
- Organizer
  18th International Conference on Precision Engineering
- Data Source
  KAKENHI-PROJECT-20K14623
[Presentation] ジャイロバレル研磨における拘束板による性能向上効果の調査2020
- Author(s)
  中山友吾，橋本洋平, 古本達明, 山口貢, 阿部諭, 小谷野智広, 細川晃
- Organizer
  2020年度精密工学会北陸信越支部学術講演会
- Data Source
  KAKENHI-PROJECT-20K14623
[Presentation] Improvement of Processing Time by Utilizing Cover Plate in Gyro Barrel Finishing2020
- Author(s)
  Yugo Nakayama, Yohei Hashimoto, Takuma Ito, Tatsuaki Furumoto, Tomohiro Koyano, Akira Hosokawa
- Organizer
  18th International Conference on Precision Engineering
- Data Source
  KAKENHI-PROJECT-20K14623
[Presentation] Turning of Difficult-to-machine Materials with High Pressure Coolant2020
- Author(s)
  Akira Hosokawa, Kazuki Kuwabara, Koki Kosugi, Tomohiro Koyano, Tatsuaki Furumoro,Yohei Hashimoto
- Organizer
  18th International Conference on Precision Engineering (ICPE2020)
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] Investigation on force acting on workpiece with respect to actual amount of abrasive media on the workpiece in dry gyro barrel finishing2019
- Author(s)
  HASHIMOTO Yohei, ITO Takuma, NAKAYAMA Yugo, FURUMOTO Tatsuaki, KOYANO Tomohiro, HOSOKAWA Akira
- Organizer
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] Relationship between spatter particle behavior and volume specific energy density in SLM process2019
- Author(s)
  OISHI Kazushi, FURUMOTO Tatsuaki, EGASHIRA Kyota, ABE Satoshi, HASHIMOTO Yohei, KOYANO Tomohiro, HOSOKAWA Akira
- Organizer
  The 8th International Conference on Manufacturing, Machine Design and Tribology (ICMDT2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] 超硬質工具による耐熱合金の高速エンドミル加工2019
- Author(s)
  鈴木健士朗，細川　晃，長嶋拓海，小谷野智広，古本達明，橋本洋平
- Organizer
  日本機械学会第13回生産加工・工作機械部門講演会講演論文集
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] 乾式ジャイロ式バレル研磨における砥粒と加工物の接触力に関する検討-砥粒径10 mmにおける検討-2019
- Author(s)
  伊藤巧馬, 橋本洋平, 中山友吾, 古本達明, 小谷野智広, 細川晃
- Organizer
  精密工学会北陸信越支部2019年度学術講演会
- Data Source
  KAKENHI-PROJECT-18K13668
[Presentation] Study on material property of dental hard tissue: Evaluation of non-carious lesion2019
- Author(s)
  OHURA Hiroki, FURUMOTO Tatsuaki, HASHIMOTO Yohei, HOSOKAWA Akira, KOYANO Tomohiro
- Organizer
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] Mechanical and tribological characteristics of VN and VN/AlCrN multilayer PVD coating films for cutting tools2019
- Author(s)
  SAITO Ryo Saito, HOSOKAWA Akira, KOYANO Tomohiro, FURUMOTO Tatsuaki, HASHIMOTO Yohei
- Organizer
  The 22nd International Symposium on Advances in Abrasive Technology (ISAAT2019)
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] ジャイロ式バレル研磨における接触力の基礎検討2019
- Author(s)
  伊藤巧馬, 橋本洋平, 古本達明, 小谷野智広, 細川晃
- Organizer
  2019年度砥粒加工学会学術講演会 (ABTEC2019)
- Data Source
  KAKENHI-PROJECT-18K13668
[Presentation] 拘束板によるジャイロ式バレル研磨の性能向上の検討2019
- Author(s)
  中山友吾, 橋本洋平, 伊藤巧馬, 古本達明, 小谷野智広, 細川晃
- Organizer
  精密工学会第27回「学生会員卒業研究発表講演会」
- Data Source
  KAKENHI-PROJECT-18K13668
[Presentation] Investigation of contact force between cylindrical workpiece and abrasive media in gyro finishing process2019
- Author(s)
  ITO Takuma, HASHIMOTO Yohei, NAKAYAMA Yugo, FURUMOTO Tatsuaki, KOYANO Tomohiro, HOSOKAWA Akira
- Organizer
  The 22nd International Symposium on Advances in Abrasive Technology (ISAAT2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] Investigation of Contact Force between Cylindrical Workpiece and Abrasive Media in Gyro Finishing Process2019
- Author(s)
  Takuma Ito, Yohei Hashimoto, Yugo Nakayama, Tatsuaki Furumoto, Tomohiro Koyano, Akira Hosokawa
- Organizer
  ISAAT2019 (The 22nd International Symposium on Advances in Abrasive Technology)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K13668
[Presentation] Surface texturing of tungsten carbide cutting tools by electrochemical machining2019
- Author(s)
  KOYANO Tomohiro, TAKABATAKE Masaaki, HOSOKAWA Akira, FURUMOTO Tatsuaki, HASHIMOTO Yohei
- Organizer
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] Study on material property of dental hard tissue:Evaluation of non-carious lesion2019
- Author(s)
  H. Ohura, T. Furumoto, Y. Hashimoto, A. Hosokawa, T. Koyano
- Organizer
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K11702
[Presentation] Investigation on force acting on workpiece with respect to actual amount of abrasive media on the workpiece in dry gyro barrel finishing2019
- Author(s)
  Yohei Hashimoto, Takuma Ito, Yugo Nakayama, Tatsuaki Furumoto, Tomohiro Koyano, Akira Hosokawa
- Organizer
  8th International Conference of ASPEN (ASPEN2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K13668
[Presentation] 高圧クーラントを用いた難削材の旋削加工　―クーラント供給面の影響―2019
- Author(s)
  桑原佳月，細川　晃，小谷野智広，古本達明，橋本洋平
- Organizer
  2019年度砥粒加工学会学術講演会 (ABTEC2019)
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] Turning of Difficult-to-machine Materials with High Pressure Coolant -Effect of coolant pressure on machinability of stainless steel-2018
- Author(s)
  Akira Hosokawa, Yuki Nomura, Tomohiro Koyano, Tatsuaki Furumoto, Yohei Hashimoto
- Organizer
  International Conference on Precision Engineering (ICPE2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] 歯科生体材料の各種特性に関する研究，非う蝕性歯質欠損の実験的検討2018
- Author(s)
  大浦宙樹，古本達明，松波宏幸，橋本洋平，小谷野智広，細川晃
- Organizer
  2018年度精密工学会春季大会　第25回「学生会員卒業研究発表講演会
- Data Source
  KAKENHI-PROJECT-17K11702
[Presentation] 極微量クーラント研削法　－接触式フレキシブルブラシノズルによる砥石表面クーラントベルトの生成－―2018
- Author(s)
  清水亮輔，細川　晃，小谷野智広，橋本洋平，古本達明
- Organizer
  2018年度砥粒加工学会学術講演会(ABTEC2018)
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] High-quality machining of CFRP with DLC-coated and diamond-coated end mills2018
- Author(s)
  Shota Tanaka, Akira Hosokawa, Goushi Hoshino, Tomohiro Koyano, Tatsuaki Furumoto, Yohei Hashimoto
- Organizer
  International Conference on 2018 Machining, Materials and Mechanical Technologies (IC3MT)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] 歯科生体材料の各種特性に関する研究，非う蝕性歯質欠損の実験的検討2018
- Author(s)
  松波宏幸，古本達明，高杉敬吾，橋本洋平，小谷野智広，細川晃
- Organizer
  2018年度精密工学会春季大会　学術講演会
- Data Source
  KAKENHI-PROJECT-17K11702
[Presentation] 高温高潤滑VN(窒化バナジウム)コーティング膜の開発と切削への適用　－AIP法及びFAD法による膜特性－2018
- Author(s)
  齊藤椋, 細川晃, 古本達明, 小谷野智広, 橋本洋平
- Organizer
  2018年度精密工学会北陸信越支部学術講演会
- Data Source
  KAKENHI-PROJECT-18H01349
[Presentation] Micro Texturing by Electrochemical Machining with Short Voltage Pulses2018
- Author(s)
  Taishi Takahashi, Tomohiro Koyano, Akira Hosokawa, Tatsuaki Furumoto, Yohei Hashimoto
- Organizer
  International Conference on Precision Engineering (ICPE2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01349

1. Furumoto Tatsuaki (60432134)

# of Collaborated Projects: 2 results

# of Collaborated Products: 20 results
2. Hosokawa Akira (40199493)

# of Collaborated Projects: 1 results

# of Collaborated Products: 18 results
3. 小谷野智広 (20707591)

# of Collaborated Projects: 1 results

# of Collaborated Products: 17 results

Hashimoto Yohei 橋本 洋平

Research Projects

Research Products

Co-Researchers

遠心バレル研磨の加工物と研磨メディアの相対運動に着目した理論構築Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

両面研磨加工における加工物‐定盤間への研磨液浸入現象の解明と効果的な供給技術開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Fundamental research of wet mass finishing focused on abrasive media behaviorPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Fundamental investigation on gyro barrel finishing for smoothing of complicated shapePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of VN(vanadium nitride)-containing coating film having high-temperature lubricity and its application to machining difficult-to-machine materials

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Experimental study on non-carious cervical lesion

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] 半導体デバイス製造を支えるCMP技術の開発動向2023

Author(s)

Total Pages

Publisher

ISBN

Data Source

[Journal Article] Finishing Speed Improvement Using Side Cover Plates in Gyro Finishing2023

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] Miniaturization of Texture Size of One-process Surface Texturing by Electrochemical Machining2022

Author(s)

Journal Title

DOI

ISSN

Language

Data Source

[Journal Article] Process state estimation in chemical mechanical polishing (CMP) by inverse analysis of in-process data2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Novel method to visualize Preston’s coefficient distribution for chemical mechanical polishing process2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] A calculation method for workpiece profile variation during double-sided lapping by considering workpiece elastic deformation2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Improving finishing efficiency using a cover plate in gyro finishing2022

Author(s)

Journal Title

DOI

Hashimoto Yohei 橋本洋平