KANG Hyungoo 姜賢求

Researcher Number	30599981
Affiliation (based on the past Project Information) *help	2013: 九州大学, 大学院工学研究院, 助教 2011 – 2013: 九州大学, 工学(系)研究科(研究院), 助教 2012: 九州大学, 工学研究院, 助教
Review Section/Research Field	Except Principal Investigator Material processing/treatments
Keywords	Except Principal Investigator ＭＩＭ / Ｔｉ合金 / 脱脂プロセス / バインダ / 寸法精度 / 複雑大形化 / チタン合金 / 金属粉末射出成形 / 有限要素法 / 超強靭化 … More / 転造 / ネット構造 / ヘテロ組織 / MIM / エラストマ / ナノインプリント / ＭＥＭＳ / フォトニックデバイス / 磁性粒子 / インプリントプロセス / マイクロアクチュエータ / 磁場駆動アクチュエータ / ナノインプリントプロセス / 微細加工 Less

Ultrahigh strengthening sintered low alloy steels by advanced powder processing for heterogeneous microstructural control
- Principal Investigator
  
  Miura Hideshi
- Project Period (FY)
  2012 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyushu University
Challenge to More Complicated and Large Sized Components Using Next Generation Ti Alloys Trough MIM process.
- Principal Investigator
  
  MIURA Hideshi
- Project Period (FY)
  2012 – 2013
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyushu University
Photonic Device with Dynamic Structural Transition
- Principal Investigator
  
  TSUMORI Fujio
- Project Period (FY)
  2011 – 2012
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyushu University

All 2013 2012 2011 Other

All Journal Article Presentation

[Journal Article] Improvement of Solid Oxide Fuel Cell by Imprinted Patterns on Electrolyte2013
- Author(s)
  Yang Xu, Fujio Tsumori, Seiya Hashimoto, Masashi Takahashi, Hyungoo Kang, Toshiko Osada, Hideshi Miura
- Journal Title
  
  Proc. IEEE-NEMS
  
  Volume: 未定
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656466
[Journal Article] Magneto-FEM Analysis for Micro Actuator using Array of Magnetic Elements2013
- Author(s)
  Fujio Tsumori, Kenji Hatama, Hyungoo Kang, Toshiko Osada, Hideshi Miura
- Journal Title
  
  Proceedings of IEEE-NEMS
  
  Pages: 845-848
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656466
[Journal Article] Evaluation of Heterogeneous Microstructure for Ultrahigh Strengthening MIM Sintered Low Alloy Steels2013
- Author(s)
  W.S.W. Harun, T. Osada, H.G. Kang, F. Tsumori, H. Miura
- Journal Title
  
  Proceedings of 2013 International Conference on Powder Metallurgy & Particulate Materials
  
  Volume: No.40 Pages: 24-27
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24246123
[Journal Article] Numerical Analysis for Heterogeneous Microstructure of Fe-Ni Low Alloy Steels by Metal Injection Molding2013
- Author(s)
  W.S.W. Harun, H. Miura, T. Osada, Y. Xu, H.G. Kang, F. Tsumori
- Journal Title
  
  Proceedings of International Conference on Materials Processing Technology 2013
  
  Volume: June Pages: 225-229
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24246123
[Journal Article] Improvement of Solid Oxide Fuel Cell by Imprinted Patterns on Electrolyte2013
- Author(s)
  Yang Xu, Fujio Tsumori, Seiya Hashimoto, Masashi Takahashi, Hyungoo Kang, Toshiko Osada, Hideshi Miura
- Journal Title
  
  Proceedings of IEEE-NEMS
  
  Pages: 887-890
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656466
[Journal Article] Magneto-FEM Analysis for Micro Actuator using Array of Magnetic Elements2013
- Author(s)
  Fujio Tsumori, Kenji Hatama, Hyungoo Kang, Toshiko Osada, Hideshi Miura
- Journal Title
  
  Proc. IEEE-NEMS
  
  Volume: 未定
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656466
[Journal Article] Micro Imprinting Process for Surface Patterning of Ceramic Sheet2013
- Author(s)
  F. Tsumori, S. Hashimoto, M. Takahashi, Y. Xu, H. Kang, T. Osada, H. Miura
- Journal Title
  
  Proceedings of the 2012 Powder Metalluryg World Congress & Exhibition
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656466
[Journal Article] Magnetic Micro Actuator Using Interactive Force between Magnetic Elements2012
- Author(s)
  Kenji Hatama, Fujio Tsumori, Yang Xu, Hyungoo Kang, Toshiko Osada, Hideshi Miura
- Journal Title
  
  Japanese Journal of Applied Physics
  
  Volume: 51 Issue: 6S Pages: 06FL14-06FL14
- DOI
  10.1143/jjap.51.06fl14
- NAID
  210000140833
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656466, KAKENHI-PROJECT-23686042
[Journal Article] Study on Fabrication of Micrometer Patterned Ceramic Sheet with Micro Powder Imprinting (μPI) Method2012
- Author(s)
  Yang Xu, Fujio Tsumori, Hyun Goo Kang, Hideshi Miura
- Journal Title
  
  Advanced Science Letters
  
  Volume: 12 Issue: 1 Pages: 170-173
- DOI
  10.1166/asl.2012.2774
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656466
[Journal Article] Fabrication of Micro Patterned Ceramic Structure by Imprinting Process2011
- Author(s)
  Yang Xu, Fujio Tsumori, Hung-Goo Kang, Hideshi Miura
- Journal Title
  
  Journal of the Japan Society of Powder and Powder Metallurgy
  
  Volume: 58 Issue: 11 Pages: 673-678
- DOI
  10.2497/jjspm.58.673
- NAID
  10030479483
- ISSN
  0532-8799, 1880-9014
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] 微細インプリントプロセスを用いた波型形状を有する高性能 SOFC 電解質層の開発2013
- Author(s)
  橋本聖矢,津守不二夫,徐楊,高橋昌史,姜賢求,長田稔子,三浦秀士
- Organizer
  機械学会九州支部講演会
- Place of Presentation
  福岡
- Year and Date
  2013-03-13
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] 多段階インプリントプロセスによるセラミックシート表面上への多階層微細パターニング2013
- Author(s)
  高橋昌史,津守不二夫,徐楊,橋本聖矢,姜賢求,長田稔子,三浦秀士
- Organizer
  日本機械学会九州支部講演会
- Place of Presentation
  福岡
- Year and Date
  2013-03-13
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] 微細インプリントプロセスを用いた波型形状を有する高性能SOFC電解質層の開発2013
- Author(s)
  橋本聖矢，津守不二夫，徐楊，高橋昌史，姜賢求，長田稔子，三浦秀士
- Organizer
  機械学会九州支部講演会
- Place of Presentation
  福岡市
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Improvement of Solid Oxide Fuel Cell by Imprinted Patterns on Electrolyte2013
- Author(s)
  XU YANG, TSUMORI Fujio, HASHIMOTO Seiya, TAKAHASHI Masashi, KANG HYUNGOO, Osada Toshiko, Miura Hideshi
- Organizer
  IEEE-NEMS2013
- Place of Presentation
  蘇州(中国)
- Year and Date
  2013-04-08
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Improvement of Solid Oxide Fuel Cell by Imprinted Patterns on Electrolyte2013
- Author(s)
  Yang Xu, Fujio Tsumori, Seiya Hashimoto, Masashi Takahashi, Hyungoo Kang, Toshiko Osada, Hideshi Miura
- Organizer
  IEEE-NEMS2013
- Place of Presentation
  Suzhou
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] 多段階インプリントプロセスによるセラミックシート表面上への多階層微細パターニング2013
- Author(s)
  高橋昌史，津守不二夫，徐楊，橋本聖矢，姜賢求，長田稔子，三浦秀士
- Organizer
  機械学会九州支部講演会
- Place of Presentation
  福岡市
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Magneto-FEM Analysis for Micro Actuator using Array of Magnetic Elements2013
- Author(s)
  Fujio Tsumori, Kenji, Hatama, Hyungoo Kang, Toshiko Osada, Hideshi Miura
- Organizer
  IEEE-NEMS2013
- Place of Presentation
  Suzhou
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Magneto-FEM analysis for Micro Actuator using Array of Magnetic Elements2013
- Author(s)
  TSUMORI Fujio, HATAMA Kenji, KANG HYUNGOO, Osada Toshiko, Miura Hideshi
- Organizer
  IEEE-NEMS2013
- Place of Presentation
  蘇州(中国)
- Year and Date
  2013-04-09
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Micro Imprinting Process for Surface Patterning of Ceramic Sheet2012
- Author(s)
  F. Tsumori, S. Hashimoto, M. Takahashi, Y. Xu, H. Kang, T. Osada, H. Miura
- Organizer
  Powder Metallurgy World Congress & Exhibition PM2012
- Place of Presentation
  横浜
- Year and Date
  2012-10-16
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] 有限要素磁場解析による磁性要素・エラストマー型微細アクチュエータの挙動解析2012
- Author(s)
  津守不二夫，姜賢求，長田稔子，三浦秀士
- Organizer
  粉体粉末冶金協会平成24年度春季大会
- Place of Presentation
  京都
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] 粉末マイクロインプリント(μPI)法による高アスペクト円錐孔アレイ表面を有するセラミックシートの作製2012
- Author(s)
  徐楊,津守不二夫,姜賢求,長田稔子,三浦秀士
- Organizer
  第63回塑性加工連合講演会
- Place of Presentation
  福岡
- Year and Date
  2012-11-05
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Improved Process for Fabrication of Solid Oxide Fuel Cell Based on the Micro Powder Imprinting Technology2012
- Author(s)
  Yang Xu, Fujio Tsumori, Hyungoo Kang, Toshiko Osada, Hideshi Miura
- Organizer
  International Conference on Materials Processsing Tehcnology 2012
- Place of Presentation
  ハワイ(米国)
- Year and Date
  2012-06-28
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] 有限要素磁場解析による磁性要素・エラストマー型微細アクチュエータの挙動解析2012
- Author(s)
  津守不二夫,姜賢求,長田稔子,三浦秀士
- Organizer
  粉体粉末冶金協会平成 24 年度春季大会
- Place of Presentation
  京都
- Year and Date
  2012-05-23
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Effects of Sintering Parameters on Morphology of the Single/Multi Layer Ceramic Sheet with Micro Pattern for Solid Oxide Fuel Cell2011
- Author(s)
  Yang Xu, Fujio Tsumori, Takuro Nishida, Hyun-Goo Kang, Hideshi Miura
- Organizer
  International Conference on Sintering 2011
- Place of Presentation
  済州等(韓国)
- Year and Date
  2011-09-01
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] 磁性粒子分散エラストマーの磁場中粘弾性評価2011
- Author(s)
  畑間健司,姜賢求,津守不二夫,三浦秀士
- Organizer
  日本鉄鋼協会
- Place of Presentation
  大阪
- Year and Date
  2011-09-20
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Magnetic Micro Actuator using Interactive Force between Magnetic Elements2011
- Author(s)
  K. Hatama, F. Tsumori, Y. XU, H. Kang and H. Miura
- Organizer
  24 th International Microprocesses and Nanotechnology Conference
- Place of Presentation
  京
- Year and Date
  2011-10-26
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Fabrication of Micro Patterned Ceramic Structure by Imprinting Process (the 2nd Report)-3D Structures on Multilayer Ceramic Sheet2011
- Author(s)
  Yang Xu, Fujio Tsumori, Hyung-goo Kang, Hideshi Miura
- Organizer
  粉体粉末冶金協会平成 23 年度秋季大会
- Place of Presentation
  大阪
- Year and Date
  2011-10-26
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Micro Thermal Imprinting on Powder-polymer Multilayer Substrate2011
- Author(s)
  Y. Xu, F. Tsumori, K. Hatama, H. Kang and H. Miura
- Organizer
  24 th International Microprocesses and Nanotechnology Conference
- Place of Presentation
  京都
- Year and Date
  2011-10-27
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Fabrication of Micro Patterned Ceramic Mold by Laser Patterning2011
- Author(s)
  H. G. Kang, Y. Xu, F. Tsumori, H. Miura
- Organizer
  International Conference on Sintering 2011
- Place of Presentation
  済州等(韓国)
- Year and Date
  2011-08-29
- Data Source
  KAKENHI-PROJECT-23656466
[Presentation] Numerical Analysis for Heterogeneous Microstructure of Fe-Ni Low Alloy Steels by Metal Injection Molding
- Author(s)
  H. Miura, W.S.W. Harun, T. Osada, Y. Xu, H.G. Kang, F. Tsumori
- Organizer
  MAPT2013（International Conference on Materials Processing Technology 2013)
- Place of Presentation
  Bangkok（Thailand）
- Invited
- Data Source
  KAKENHI-PROJECT-24246123
[Presentation] Fine Heterogeneou Microstructure and Mechanical Properties of MIM Fe-Ni Alloy Steels
- Author(s)
  H. Miura, W. S. W Harun, T. Osada, H. K. Kang, F. Tsumori
- Organizer
  Powder Meta 2013(2013 International Conference on powder Metallurgy & Particulate Materials)
- Place of Presentation
  Chicago（U.S.A.）
- Data Source
  KAKENHI-PROJECT-24246123

1. MIURA Hideshi (30117254)

# of Collaborated Projects: 3 results

# of Collaborated Products: 30 results
2. TSUMORI Fujio (10343237)

# of Collaborated Projects: 2 results

# of Collaborated Products: 30 results
3. OSADA TOSHIKO (90452812)

# of Collaborated Projects: 2 results

# of Collaborated Products: 4 results
4. KIRIHARA Soushyu (40362587)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. XU Yang (60648559)

# of Collaborated Projects: 1 results

# of Collaborated Products: 19 results

KANG Hyungoo 姜 賢求

Research Projects

Research Products

Co-Researchers

Ultrahigh strengthening sintered low alloy steels by advanced powder processing for heterogeneous microstructural control

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Challenge to More Complicated and Large Sized Components Using Next Generation Ti Alloys Trough MIM process.

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Photonic Device with Dynamic Structural Transition

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Improvement of Solid Oxide Fuel Cell by Imprinted Patterns on Electrolyte2013

Author(s)

Journal Title

Data Source

[Journal Article] Magneto-FEM Analysis for Micro Actuator using Array of Magnetic Elements2013

Author(s)

Journal Title

Data Source

[Journal Article] Evaluation of Heterogeneous Microstructure for Ultrahigh Strengthening MIM Sintered Low Alloy Steels2013

Author(s)

Journal Title

Data Source

[Journal Article] Numerical Analysis for Heterogeneous Microstructure of Fe-Ni Low Alloy Steels by Metal Injection Molding2013

Author(s)

Journal Title

Data Source

[Journal Article] Improvement of Solid Oxide Fuel Cell by Imprinted Patterns on Electrolyte2013

Author(s)

Journal Title

Data Source

[Journal Article] Magneto-FEM Analysis for Micro Actuator using Array of Magnetic Elements2013

Author(s)

Journal Title

Data Source

[Journal Article] Micro Imprinting Process for Surface Patterning of Ceramic Sheet2013

Author(s)

Journal Title

Data Source

[Journal Article] Magnetic Micro Actuator Using Interactive Force between Magnetic Elements2012

Author(s)

Journal Title

DOI

NAID

Data Source

[Journal Article] Study on Fabrication of Micrometer Patterned Ceramic Sheet with Micro Powder Imprinting (μPI) Method2012

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Fabrication of Micro Patterned Ceramic Structure by Imprinting Process2011

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Presentation] 微細インプリントプロセスを用いた波型形状を有する高性能 SOFC 電解質層の開発2013

Author(s)

Organizer

Place of Presentation

Year and Date

Data Source

[Presentation] 多段階インプリントプロセスによるセラミックシート表面上への多階層微細パターニング2013

Author(s)

Organizer

Place of Presentation

Year and Date

KANG Hyungoo 姜賢求