Takaichi Atsushi 高市敦士

Researcher Number	30707047
Other IDs
Affiliation (Current)	2021: 東京医科歯科大学, 歯学部附属病院, 助教
Affiliation (based on the past Project Information) *help	2016 – 2020: 東京医科歯科大学, 歯学部附属病院, 助教 2013 – 2015: 東京医科歯科大学, 歯学部附属病院, 医員 2014: 東京医科歯科大学, 歯学部附属病院, その他
Review Section/Research Field	Principal Investigator Prosthodontics/ Dental materials science and / Basic Section 57050:Prosthodontics-related
Keywords	Principal Investigator CAD/CAM / 積層造形 / コバルトクロム合金 / 異方性 / 疲労強度 / 熱処理 / レーザー積層造形法 / 残留応力 / 積層造形法 / 歯科 … More

区画化型スキャンストラテジーを駆使した歯科補綴装置の高機能・長寿命化Principal InvestigatorOngoing
- Principal Investigator
  
  高市敦士
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 57050:Prosthodontics-related
- Research Institution
  Tokyo Medical and Dental University
Effect of heat treatment on improving the mechanical property and reducing anisotropy of dental prosthesis produced by selective laser meltingPrincipal Investigator
- Principal Investigator
  
  Takaichi Atsushi
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Prosthodontics/ Dental materials science and
- Research Institution
  Tokyo Medical and Dental University
Application of selective laser melting in manufacturing of dental prosthesesPrincipal Investigator
- Principal Investigator
  
  Takaichi Atsushi
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Prosthodontics/ Dental materials science and
- Research Institution
  Tokyo Medical and Dental University
レーザー積層造形法の歯科補綴装置への応用の評価と実用化Principal Investigator
- Principal Investigator
  
  高市敦士
- Project Period (FY)
  2013 – 2014
- Research Category
  
  Grant-in-Aid for Research Activity Start-up
- Research Field
  
  Prosthodontics/ Dental materials science and
- Research Institution
  Tokyo Medical and Dental University

All 2020 2019 2018 2017 2016 2015

All Journal Article Presentation

[Journal Article] Influence of magnetic susceptibility and volume on MRI artifacts produced by low magnetic susceptibility Zr-14Nb alloy and dental alloys2020
- Author(s)
  Kajima Y, Takaichi A, Tsutsumi Y, Hanawa T, Wakabayashi N, Kawasaki A.
- Journal Title
  
  Dental Materials Journal
  
  Volume: 39 Issue: 2 Pages: 256-261
- DOI
  10.4012/dmj.2018-426
- ISSN
  0287-4547, 1881-1361
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17J10345, KAKENHI-PROJECT-17K17157
[Journal Article] Effect of heat treatment on the anisotropic microstructural and mechanical properties of Co-Cr-Mo alloys produced by selective laser melting2020
- Author(s)
  Atsushi Takaichi, Yuka Kajima, Nuttaphon Kittikundecha, Hein Linn Htat, Hla Htoot Wai Cho, Takao Hanawa, Takayuki Yoneyama, Noriyuki Wakabayashi.
- Journal Title
  
  Journal of the Mechanical Behavior of Biomedical Materials
  
  Volume: 102 Pages: 103496-103496
- DOI
  10.1016/j.jmbbm.2019.103496
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K17152, KAKENHI-PROJECT-17K17157
[Journal Article] Effect of heat treatment on the microstructure and fatigue strength of CoCrMo alloys fabricated by selective laser melting2019
- Author(s)
  Seki Erina、Kajima Yuka、Takaichi Atsushi、Kittikundecha Nuttaphon、Cho Hla Htoot Wai、Htat Hein Linn、Doi Hisashi、Hanawa Takao、Wakabayashi Noriyuki
- Journal Title
  
  Materials Letters
  
  Volume: 245 Pages: 53-56
- DOI
  10.1016/j.matlet.2019.02.085
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K17152, KAKENHI-PROJECT-17K17157, KAKENHI-PROJECT-17J10345
[Journal Article] Fatigue properties of removable partial denture clasps fabricated by selective laser melting followed by heat treatment2019
- Author(s)
  Kittikundecha N, Kajima Y, Takaichi A, Wai Cho HH, Htat HL, Doi H, Takahashi H, Hanawa T, Wakabayashi N.
- Journal Title
  
  Journal of the Mechanical Behavior of Biomedical Materials
  
  Volume: 98 Pages: 79-89
- DOI
  10.1016/j.jmbbm.2019.06.010
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K17152, KAKENHI-PROJECT-17K17157
[Journal Article] Effect of heat-treatment temperature on microstructures and mechanical properties of Co?Cr?Mo alloys fabricated by selective laser melting2018
- Author(s)
  Kajima Yuka、Takaichi Atsushi、Kittikundecha Nuttaphon、Nakamoto Takayuki、Kimura Takahiro、Nomura Naoyuki、Kawasaki Akira、Hanawa Takao、Takahashi Hidekazu、Wakabayashi Noriyuki
- Journal Title
  
  Materials Science and Engineering: A
  
  Volume: 726 Pages: 21-31
- DOI
  10.1016/j.msea.2018.04.048
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K17157, KAKENHI-PROJECT-17K17152, KAKENHI-PROJECT-17J10345
[Journal Article] Fatigue strength of Co-Cr-Mo alloy clasps prepared by selective laser melting2016
- Author(s)
  Yuka Kajima, AtsushiTakaichi, Takayuki Nakamoto, Takahiro Kimura,Yoshiaki Yogo, Maki Ashida, Hisashi Doi, Naoyuki Nomura, Hidekazu Takahashie, Takao Hanawa, Noriyuki Wakabayashi
- Journal Title
  
  Journal of the mechanical behavior of biomedical materials
  
  Volume: 59 Pages: 446-458
- DOI
  10.1016/j.jmbbm.2016.02.032
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26861627
[Presentation] Influence of heat treatment on the mechanical and corrosion properties of CoCrMo alloys fabricated by selective laser melting.2019
- Author(s)
  Atsushi Takaichi, Yuka Kajima, Tatsuya Oishi, Nuttaphon Kittikundecha, Hein Linn Htat, Yusuke Tsutsumi, Takao Hanawa, Noriyuki Wakabayashi.
- Organizer
  8th International Conference on Mechanics of Biomaterials and Tissues
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K17157
[Presentation] Effect of cooling conditions after heat treatment on the micro-structure and mechanical properties of cobalt-chromium-molybdenum alloy prepared by selective laser melting.2019
- Author(s)
  Cho Hla Htoot Wai, Kajima Yuka, Takaichi Atsushi, Nuttaphon Kittikundecha, Htat Hein Linn, Hanawa Takao, Wakabayashi Noriyuki.
- Organizer
  第74回日本歯科理工学会
- Data Source
  KAKENHI-PROJECT-17K17157
[Presentation] Relationship between microstructures and fatigue strengths in selective laser melted CoCrMo alloy subjected to heat treatment2018
- Author(s)
  Kittikundecha Nuttaphon，Kajima Yuka，Takaichi Atsushi，Nakamoto Takayuki, Doi Hisashi，Tsutsumi Yusuke, Nomura Naoyuki, Kawasaki Akira，Takahashi Hidekazu, Hanawa Takao, Wakabayashi Noriyuki.
- Organizer
  第72回日本歯科理工学会学学術講演会
- Data Source
  KAKENHI-PROJECT-17K17157
[Presentation] レーザー積層造形法で製作した Co-Cr-Mo合金への熱処理の有効性の評価2018
- Author(s)
  加嶋祐佳，高市敦士，高橋英和，若林則幸.
- Organizer
  日本補綴歯科学会　第127回学術大会
- Data Source
  KAKENHI-PROJECT-17K17157
[Presentation] Surface Characteristics and Corrosion Behavior of CoCrMo Alloys Fabricated by Selective Laser Melting after Various Heat Treatments.2018
- Author(s)
  Kajima Y, Takaichi A, Oishi T, Kittikundecha N, Tsutsumi Y, Nomura N, Hanawa T, Wakabayashi N, Kawasaki A.
- Organizer
  AVS Pacific Rim Symposium on Surfaces, Coatings and Interfaces (PacSurf 2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K17157
[Presentation] レーザー積層造形法で製作したCoCrMo合金への熱処理条件の検討2018
- Author(s)
  加嶋祐佳，高市敦士，Nuttaphon Kittkundecha，野村直之，塙隆夫，若林則幸，川崎亮
- Organizer
  日本バイオマテリアル学会東北ブロック講演会
- Data Source
  KAKENHI-PROJECT-17K17157
[Presentation] Effect of Preheating Treatments on Interfacial Reaction between Dental Porcelain and Low Magnetic Susceptibility Zr-14Nb Alloy2018
- Author(s)
  Takaichi A, Kajima Y, Doi H, Hanawa T, Wakabayashi N.
- Organizer
  AVS Pacific Rim Symposium on Surfaces, Coatings and Interfaces (PacSurf 2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K17157
[Presentation] レーザー積層造形法で製作した Co-Cr-Mo 合金への熱処理が疲労強度に与える影響2018
- Author(s)
  関絵里奈，高市敦士，加嶋祐佳，若林則幸.
- Organizer
  平成30年度日本補綴歯科学会東京支部総会・第22回学術大会
- Data Source
  KAKENHI-PROJECT-17K17157
[Presentation] 積層造形体の疲労強度に与えるサポート構造の影響.2017
- Author(s)
  加嶋祐佳，高市敦士，高橋英和，若林則幸.
- Organizer
  日本補綴歯科学会　第１２６回学術大会
- Data Source
  KAKENHI-PROJECT-17K17157
[Presentation] レーザー積層造形法で製作したコバルトクロム合金の異方性制御に有効な熱処理条件の検討.2017
- Author(s)
  加嶋祐佳，高市敦士，中本貴之，ナタポン　キットクンダシャー，野村直之，高橋英和，塙隆夫，若林則幸，川崎亮.
- Organizer
  第70回日本歯科理工学会学術講演会
- Data Source
  KAKENHI-PROJECT-17K17157
[Presentation] レーザー積層造形法においてオーバーハング部へのサポート構造の付与が疲労強度に与える影響.2017
- Author(s)
  高市敦士，加嶋祐佳，中本貴之，堤祐介，野村直之，高橋英和，塙隆夫，若林則幸.
- Organizer
  第70回日本歯科理工学会学術講演会
- Data Source
  KAKENHI-PROJECT-17K17157
[Presentation] 積層造形体の疲労強度に与えるサポート構造の影響2017
- Author(s)
  加嶋祐佳，高市敦士，高橋英和，若林則幸
- Organizer
  日本補綴歯科学会第126回学術大会
- Place of Presentation
  パシフィコ横浜，横浜，神奈川
- Year and Date
  2017-06-30
- Data Source
  KAKENHI-PROJECT-26861627
[Presentation] レーザー積層造形法で製作したコバルトクロム合金への熱処理条件の検討2016
- Author(s)
  高市敦士，加嶋祐佳，余語良章，高橋英和，若林則幸
- Organizer
  日本補綴歯科学会第125回学術大会
- Place of Presentation
  石川県立音楽堂、金沢、石川
- Year and Date
  2016-07-08
- Data Source
  KAKENHI-PROJECT-26861627
[Presentation] Effects of support structure on the fatigue strength of selective laser melted CoCrMo clasps2016
- Author(s)
  Takaichi A, Kajima Y, Kittikundecha N, Nakamoto T, Nomura N, Takahashi H, Hanawa T, and Wakabayashi N
- Organizer
  International Dental Materials Congress 2016
- Place of Presentation
  Bali, ,Indonesia
- Year and Date
  2016-11-04
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26861627
[Presentation] Effects of heat treatment on the microstructure and mechanical property of selective laser melted CoCrMo alloys.2016
- Author(s)
  Kajima Y, Takaichi A, Kittikundecha N, Nakamoto T, Doi H, Takahashi H, Nomura N, Hanawa T, Wakabayashi N.
- Organizer
  International Dental Materials Congress 2016
- Place of Presentation
  Bali, ,Indonesia
- Year and Date
  2016-11-04
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26861627
[Presentation] レーザー積層造形法で製作したクラスプの疲労特性.2015
- Author(s)
  加嶋祐佳、高市敦士、余語良章、高橋英和、若林則幸.
- Organizer
  平成27年度日本補綴歯科学会・東京支部学術大会
- Place of Presentation
  東京医科歯科大学（東京都文京区）
- Year and Date
  2015-11-29
- Data Source
  KAKENHI-PROJECT-26861627
[Presentation] 積層造形法により製作したクラスプの疲労強度の異方性2015
- Author(s)
  高市敦士
- Organizer
  金属光造形複合加工医療機器フォーラム第9回シンポジウム
- Place of Presentation
  松浦機械製作所東京フォーラムセンター（東京都大田区）
- Year and Date
  2015-12-05
- Invited
- Data Source
  KAKENHI-PROJECT-26861627
[Presentation] レーザー積層造形法で製作したCo-Cr-Mo合金クラスプの疲労強度.2015
- Author(s)
  高市敦士，加嶋祐佳，中本貴之，蘆田茉希，土居壽，野村直之，塙隆夫，高橋英和，若林則幸 .
- Organizer
  第66回日本歯科理工学会学術講演会
- Place of Presentation
  タワーホール船堀（東京都江戸川区）
- Year and Date
  2015-10-03
- Data Source
  KAKENHI-PROJECT-26861627
[Presentation] Fatigue resistance of Co-Cr-Mo alloy clasps fabricated by selective laser melting process.2015
- Author(s)
  Kajima Y, Takaichi A, Nakamoto T, Kimura T, Ashida M, Doi H, Nomura N, Hanawa T, Takahashi H, Wakabayashi N.
- Organizer
  6th International Conference on Mechanics of Biomaterials and Tissues (ICMOBT)
- Place of Presentation
  Marriott Waikoloa （Hawaii, USA）
- Year and Date
  2015-12-06
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26861627

1. KAJIMA YUKA (70778977)

# of Collaborated Projects: 1 results

# of Collaborated Products: 12 results

Takaichi Atsushi 高市 敦士

Research Projects

Research Products

Co-Researchers

区画化型スキャンストラテジーを駆使した歯科補綴装置の高機能・長寿命化Principal InvestigatorOngoing

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Effect of heat treatment on improving the mechanical property and reducing anisotropy of dental prosthesis produced by selective laser meltingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Application of selective laser melting in manufacturing of dental prosthesesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

レーザー積層造形法の歯科補綴装置への応用の評価と実用化Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Influence of magnetic susceptibility and volume on MRI artifacts produced by low magnetic susceptibility Zr-14Nb alloy and dental alloys2020

Author(s)

Journal Title

DOI

ISSN

Language

Data Source

[Journal Article] Effect of heat treatment on the anisotropic microstructural and mechanical properties of Co-Cr-Mo alloys produced by selective laser melting2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Effect of heat treatment on the microstructure and fatigue strength of CoCrMo alloys fabricated by selective laser melting2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Fatigue properties of removable partial denture clasps fabricated by selective laser melting followed by heat treatment2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Effect of heat-treatment temperature on microstructures and mechanical properties of Co?Cr?Mo alloys fabricated by selective laser melting2018

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Fatigue strength of Co-Cr-Mo alloy clasps prepared by selective laser melting2016

Author(s)

Journal Title

DOI

Data Source

[Presentation] Influence of heat treatment on the mechanical and corrosion properties of CoCrMo alloys fabricated by selective laser melting.2019

Author(s)

Organizer

Data Source

[Presentation] Effect of cooling conditions after heat treatment on the micro-structure and mechanical properties of cobalt-chromium-molybdenum alloy prepared by selective laser melting.2019

Author(s)

Organizer

Data Source

[Presentation] Relationship between microstructures and fatigue strengths in selective laser melted CoCrMo alloy subjected to heat treatment2018

Author(s)

Organizer

Data Source

[Presentation] レーザー積層造形法で製作した Co-Cr-Mo合金への熱処理の有効性の評価2018

Author(s)

Organizer

Data Source

[Presentation] Surface Characteristics and Corrosion Behavior of CoCrMo Alloys Fabricated by Selective Laser Melting after Various Heat Treatments.2018

Author(s)

Organizer

Data Source

Takaichi Atsushi 高市敦士